Ima Hka nakup rabljenega (134)

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED LOADING STATION Vacuum system (with pump) No. 2 vertical support columns for the upper support beam Fgodpofi Tg Hjfx Ah Djh No. 1 upper horizontal support beam (on which the carriage slides) No. 1 motorized carriage with horizontal metal arms External roller conveyor (on the floor) for loading the stack of panels onto the loading station External motorized roller conveyor (for receiving panels from the loading station) Separate electrical control panel Perimeter safety fencing with safety mats Working capacity (cycles/min) approx. 16 Panel thickness (min/max) mm 10 / 50 (approx.) Min. panel dimensions mm 250 x 320 (approx.) Max. panel dimensions mm 1300 x 3000 (approx.) Total connected load kW 30

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Ferwood Code: RU0008884 – Manufacturer Code: – Condition: Used – Functionality: Not tested – Compatible Machine: IMA COMBIMA/NOVIMAT Edge Bander – If interested, we offer an overhaul service; please contact us. Fgsdpfx Aov Hgmfoh Deh

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, Single-sided edge banding machine for narrow edges IMA NOVIMAT / CONTOUR / I / G80 / 790 / L20 with MFA servo unit for corner copying Year of manufacture: 2009 Technical condition: very good - Stable machine frame, onto which individual machining units are mounted. - Feed drive with electronically adjustable feed speed range from 6–30 m/min (machining unit operating speeds are not synchronized with the full range of feed adjustment). - Feed chain guided in low-friction guides with plastic pads and 80 mm wide rubber covering. - Automatic feed chain lubrication controlled by the machine program. - Upper pressure beam made from a double V-belt, 70 mm wide, guided on ball bearing-supported rollers; pressure beam is electronically adjustable. - Safety guards corresponding to CE certification. - Soundproofing and protective enclosures. - Edging unit with drive installed in a fully enclosed oil bath with glue pot (1 main powered pressure roller + 5 auxiliary rollers); pneumatic Quick-Lock glue pot fast-change system. - Touch-screen display. - End trimming unit for cutting off edge overhang at front and rear corners, with features including: pneumatic saw tilting 0–25°, straight and chamfer cutting, automatic saw positioning for corner chamfering for two different edge thicknesses (e.g. 0.4 and 1.2 mm) and adjustment of edge overhang cutting for corner copying. - All machining units equipped with chip extraction. - Novimat Contour series edge banders ensure very high processing quality due to the powerful corner copying unit and small gap between workpieces (~300 mm). Key technical data: - Edge material from roll thickness: from 0.3 to 3 mm Fgjdpow R S Slsfx Ah Deh - Paper, PVC and ABS edges: 0.3–3.0 mm - Veneer: 0.5–3.0 mm - Solid wood strips: 0.8–20 mm - Edge height: 14–65 mm - Maximum top edge overhang: • for edge thickness up to 8 mm – 5 mm • above 8 mm – 2 mm Workpiece dimensions: - Minimum workpiece length in feed direction: 150 mm - Minimum workpiece width (for up to 25 mm thick elements): 65 mm - Minimum workpiece thickness: 8 mm (without flat scraper) or 12 mm (with flat scraper) - Maximum workpiece thickness: • without corner copying: max 60 mm • with corner copying: max 40 mm - Smallest element: 150 × 150 mm or 65 × 300 mm (note: * 65 mm width at maximum workpiece thickness of 25 mm) Machine technical parameters: - Workpiece feed speed electronically adjustable: 6–30 m/min (note: feed speed may be limited by specific units on the machine) - Workpiece overhang beyond feed chain: • 38 mm (with edge thickness 0.3–8 mm) • 30 mm (with edge thickness 8.1–20 mm) Electrical supply: - Voltage: 400/230 V, +5/–10 % with neutral - Frequency: 50 Hz - Control voltage: 230 V AC / 24 V - Compressed air: 8 bar - Extraction air speed: 28 m/s

Stanje: rabljeno, številka stroja/vozila: 007726, Pozicija 1: Robilni stroj LottoUno IMA-COMBIMA SYSTEM/I/R75/1840 Pozicija 2: Robilni stroj LottoUno IMA-COMBIMA SYSTEM/I/R75/1840 Fsdpfjwuug Isx Ah Djgh

Leto izdelave: 1998, Stanje: dober (rabljeno), Schraubverschließer für Kunststoffdeckel, Durchmesser 50 mm x 20 mm Höhe 380 V, 7,5 kW Fgsdpsh Np Uqofx Ah Dsh Maschine mit Deckelzuführung/-sortierung und Fehlverschluss-Erkennung. Leistung bis zu 50 Stück/Minute wie besichtigt (as-is) oder angepasst an Kundenvorgaben

Leto izdelave: 2003, Stanje: pripravljen za uporabo (rabljen), Splošni podatki Teža stroja: 7200 kg Glavni pogon Območje hitrosti vretena: 15.000 vrt/min Vrsta vpenjanja orodja: HSK F63 Pomiki Pomik osi X: 4.200 mm Pomik osi Y: 1.200 mm Orodja Največja teža orodja: 6 kg Največji premer orodja: 100 mm Največja dolžina orodja: 150 mm Ta stroj IMA BIMA CUT 120/240 je bil izdelan leta 2003. Gre za CNC-obdelovalni center za les z obdelovalnim območjem X: 4.200 mm, Y: 1.200 mm in največjo višino vpenjanja 100 mm. Stroj vključuje glavno vreteno z vpenjalom HSK F63 in močjo pogona 7,5 kW. Poleg tega ima stroj menjalnik orodij z 18 mesti ter omogoča različne operacije vrtanja in rezkanja. Za dodatne informacije o stroju nas kontaktirajte. Vrsta uporabe CNC obdelava lesa Fsdpfxjwwblco Ah Djgh

Stanje: zelo dobro (rabljeno), CNC MACHINING CENTER (POINT-TO-POINT) – 5 Axes (ROBOT head) Gantry design construction Control: ICOS CNC – Software: IMAWOP / (OPTION IMAwinCAD) Safety cabin for machining head Clamping table with 8 consoles LED positioning system on the X-axis for console positioning and on the Y-axis for vacuum clamp positioning Automatic tool change system 2 disk-type tool changers – Magazine/tool stations (8 each) + TC8 (18 stations) Maximum working area (X-Y-Z): 4300 mm x 1300 mm (1410 mm) x 350 mm 2 working zones – Vacuum pump (capacity in m³/h): 140 Separate electrical and control cabinet. Total power connected (kW): 23 Fsdpjfin Sasfx Ah Djgh WORKING UNITS (TOP): 21 independent vertical drilling spindles 4 independent horizontal drilling spindles (drilling head motor power: 1.2 kW x 4) 1 grooving unit, 125 mm diameter, swivels 90° in X-Y direction 1 vertical main spindle (milling unit), robot head (HSK F63) Vertical main spindle power (kW): 9 Independent Z-axis travel: 650 mm A-axis arranged/mounted at a 90° angle to the C-axis C-axis rotation range: 420°, A-axis rotation range: 140°

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Ferwood Code: RU0000030 - Manufacturer Code: 10551904 - Condition: Used - Functionality: Not tested - Compatible Machine: IMA ADVANTAGE/NOVIMAT edge bander - If interested, we offer an overhaul service, please contact us. Fedpev Azf Iefx Ah Dogh

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, 4-Axis Machining Center IMA BIMA 300 Year of Manufacture: 2009 Technical Condition: Very Good Technical Data: - Working table: 4,300 × 1,250 mm - 8 consoles (24 suction cups) - Main spindle: 7.5 kW (max. 11 kW), 1,500–18,000 rpm - Tool magazine: 18 positions - IMA 14 drilling unit - Tool set - 2 × vacuum pump 90 m³/h - Safety mats – alternating mode operation - IMAWOP software on machine + 1 office license - Emergency computer power supply - Control cabinet air conditioner - Main spindle unit for horizontal drilling Fodpfx Aew R S Dnsh Djgh - Max. feed rates: X 60 m/min, Y 60 m/min, Z 30 m/min - Dust extraction: as per connection diagram; air velocity v = 28 m/s; central port Ø 250 mm - Weight: approx. 5,500 kg - Compressed air: ¾" connection, 6 bar; dry operation (dryer recommended if the system does not comply) - Electrical installation: main switch in separate control cabinet; operated from separate control panel; complete electrical cabinet with monitoring; all safety features comply with CE; typical cabinet dimensions (H/W/D) approx. 2000×1200×800 mm; power supply 400/230 V, 50 Hz - Environmental conditions: permissible ambient temp. +15…+35 °C (without cabinet air conditioner) - CNC control - Controller: ICOS OPEN 321 (PL language version) - Interpolation: linear simultaneous for 3 axes; circular 2½D for two axes in any of the three planes - Selected IMAWOP functions: operation selection (drilling, milling, grooving); graphics update after corrections; drilling time optimization; graphical cup positioning; conditional/formula programming; technology and tool databases; alphanumeric names/descriptions (up to 28 characters); subprograms; manual entry of machining sequence; disturbance messages; acceleration/braking adjustment (accuracy to 0.001 mm); automatic referencing; corrections from portable panel Additionally: IMAWOP machining program

Stanje: zelo dobro (rabljeno), One-sided edge banding machine (LEFT) Edge thickness in rolls (min/max) mm 0.3 - 3 Edge thickness in strips/lippings (min/max) mm 3 - 12 Panel thickness (min/max) mm 8 - 60 Control ICOS open TS Feed speed m/min (adjustable) 4 - 20 Upper pressure with V-belt drive Sprayer unit (for liquid anti-adhesive) Jointing milling unit 08.376 (2 x 3 kW) Gluing unit (Hot Melt glue) 283.1513 Edge pressure zone Edge magazine for rolls (compartment no.) 1 End trimming unit 08.415 (2 x 0.66 kW) Fjdpfx Ahsflc Uho Djgh Milling unit 08.055 (2 x 1 kW) 0°-30° Multi-functional unit (radius milling and contour milling unit) 08.342 (2 x 0.66 kW) Profile scraper unit 08.519 Flat scraper unit 08.50 Buffing unit 08.612 (2 x 0.25 kW)

Stanje: kot nova (razstavni stroj), SINGLE-SIDED EDGE BANDER (LEFT) Edge thickness on rolls (min/max) mm 0.3 / 3 – in lippings/strips mm max 1 Panel thickness (min/max) mm 8 / 60 (Laser – max 44) Control ICOS Open Feed speed m/min (adjustable) 16 – 30 Pressure belt driven by V-belt Spray unit (for liquid non-stick) Adjustable fence, CNC controlled Panel feeding system 700.101 (mm 500 x 500) Jointing milling unit with CNC-controlled 08.379 (Kw 4.0 x 2) edge pressure zone (CNC-controlled) Gluing unit (P.U.R. adhesive + premelter) 04.0836 + 283.1518 (edge feed servo-motor), adjustable via CNC Gluing unit (premelter with laser) Laser system IMALUX Spray unit (for separating agent) Pressure zone + edge magazine for rolls (compartments No.) 6 Linear end trimming unit 08.428 LKA V30/2 (Kw 0.2 x 2) speed up to 30 m/min (0°–25°) Multi-profile milling unit (CNC controlled) 08.0587 (Kw 1.0 x 2) 4 profiles Contour milling unit (for fine milling) CNC controlled KFA 20 (Kw 0.5 x 1) max 25 m/min Fgedpfx Ahogbug No Djh Profile scraper unit DUO (4 profiles) Flat scraper unit 08.521 Spray unit (for polishing liquid) Buffing unit 08.617-4 (Kw 0.18 x 4) Universal milling unit for grooving/rebating and profiling 2x08.190 (Kw 4.5 x 2) 90°/180°/270° (CNC)

Stanje: zelo dobro (rabljeno), 4-axis (X-Y-Z-C) CNC machining centre for milling, drilling, cutting, and edgebanding Control: IMAtronic 231 (Software: IMAWOP) Maximum working area (X - Y - Z) mm: 5000 x 1630 x 100 Maximum working area for edgebanding (X - Y - Z) mm: 3900 x 1450 x 60 No. 8 clamping tables with consoles (number of consoles) - 1200 mm LED setup assistance for vacuum cup (sleeve) positioning (Y-axis) 1 vacuum pump (capacity 140 m³/h) Safety enclosure for working head, safety foot mats Chip conveyor Fgjdpfxsfbmqtj Ah Doh No. 2 vertical main spindles (milling units), HSK F63 (1 x 11 kW + 1 x 7.5 kW) Automatic tool change system (disc changer) with 18 tool positions No. 21 independent vertical drilling spindles (4 x 1.2 kW) No. 6 independent horizontal drilling spindles (1 x 3 kW) Edgebanding unit – gluing module (hot melt glue) VT 50 Edge magazine for rolls (6 compartments) OPTIONAL: 1 adapter unit for saw, fixed 90 degrees, max diameter 200 mm 1 adapter unit for flush milling and profile pull blade 1 adapter unit horizontal drilling & milling head (cross head) with 4 horizontal spindles

Stanje: zelo dobro (rabljeno), Single-sided edge banding machine (LEFT) Edge thickness (tape, min/max) mm: 0.3 - 3 Edge thickness (solid strips min/max) mm: 3 - 12 Panel thickness (min/max) mm: 8 - 60 Control system: ICOS open TS Feed speed m/min (adjustable): 4 - 20 Top pressure: Driven by V-belt Sprayer unit (for liquid non-stick agent) Jointing milling unit 08.376 (2 x 3 kW) Gluing unit (hot melt adhesive) 283.1513 Pressure zone for edging Edge magazine for tape (compartment no.): 1 End trimming unit 08.415 (2 x 0.66 kW) Milling unit 08.055 (2 x 1 kW) 0°-30° Multi-function unit (radius and profile milling) 08.342 (2 x 0.66 kW) servo-controlled Profile scraping unit 08.519 Flat scraping unit 08.50 Buffing unit 08.612 (2 x 0.25 kW) Fsded Nuu Hepfx Ah Dogh

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED LOADING STATION Fgsdpfswbp Nwsx Ah Djh Vacuum system (with pump) No. 2 vertical support columns for the upper support beam No. 1 horizontal upper support beam (on which the carriage slides) No. 1 motorized carriage with horizontal metal arms No. 2 external roller conveyors for discharge of the panel stack from the unloader No. 1 external motorized roller conveyor at the stacking section Separate electrical control panel Perimeter safety fencing Performance (cycles/minute): approx. 16 Min/Max panel thickness (mm): approx. 10 / 50 Min. panel dimensions (mm): approx. 250 x 320 Max. panel dimensions (mm): approx. 1300 x 3000 Total connected load: 80 kW

Stanje: zelo dobro (rabljeno), 4-axis CNC-controlled MACHINING CENTER Gantry-type construction, ICOS-Open control system. Fjdpfxevxhnuj Ah Dogh Software: IMAWOP / IMATRONIC - BIMA Fast Cut Clamping table with consoles. No. 6 consoles (1400 mm) Automatic positioning of the consoles (X-axis) Automatic positioning of the vacuum clamps (Y-axis) Automatic tool change system Rotary changer – magazine with 18 tool slots Maximum working area (X – Y – Z): 4250 x 1600 x 60 mm Minimum workpiece dimensions (X – Y – Z): 295 x 115 x 14 mm Maximum workpiece dimensions (X – Y – Z): 4250 x 2200 x 60 mm Chip conveyor Separate electrical and control cabinet. Total connected load: 28 kW WORKING UNITS (TOP): Vertical main spindle (milling unit) HSK F63 – power: 14.5 kW (S6) / 7.5 kW (S1) No. 3 grippers for clamping and moving the panels onto the machine’s vacuum cups No. 5 air tables for staging panels before processing Vacuum system with program-controlled suction for lifting panels onto the conveyor belt Panel discharge system with motorized conveyors

Stanje: zelo dobro (rabljeno), COMPLETE FOUR-SIDED SIZING AND EDGE BANDING LINE Fjdpfx Asun N Dleh Djgh The line consists of the following machines: A) W06027 1st double-sided sizing and edge banding machine "IMA" Combima II /440 /A /R3 B) Rotation unit (90°) C) W06028 2nd double-sided sizing and edge banding machine "IMA" Combima II /190 /B /R3

Stanje: zelo dobro (rabljeno), ONE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm: 0.3 / 3 Edge thickness in strips (min/max) mm: 0.8 / 20 Panel thickness (min/max) mm: 8 / 60 Control: ICOS Open Compact Feed speed m/min (adjustable): 6 - 30 Top pressure: toothed belt driven Adjustable fence: CNC controlled Fedpfoidqphex Ah Dogh Jointing unit with CNC-controlled 08.376 (kW 4.5 x 2) Lamps for workpiece edge heating Edging station (Hot Melt + pre-melter) 283.1513 + 283.201 Edge pressure zone Edge magazine for rolls (compartment No.): 1 End trimming unit 08.42 (kW 0.66 x 2), max 30 m/min, 0°-25° Milling unit 08.055 (kW 1.85 x 2) 0°-30° Spray unit (for sliding liquid) Contour milling unit (for fine trimming) CNC controlled 08.348 (kW 0.66 x 2) 4 profiles Profile scraper unit 08.516 (4 profiles) Flat scraper unit 08.50 Spray unit (for polishing liquid) Buffing unit 08.612-2 (kW 0.25 x 2) Universal milling unit for grooving/rebating and profiling 08.183 (kW 3 x 1)

Stanje: zelo dobro (rabljeno), 4-axis (X-Y-Z-C) CNC machining center for milling, drilling, cutting, and edge banding Gantry design, equipped with ICOS-Open control system. Software: IMAWOP + IMAwinCAD. Set-up table with consoles. Number of consoles: 6 (1450 mm) DYNAPOINT Automatic positioning of consoles (X-axis) Automatic positioning of vacuum clamps (Y-axis) Automatic tool changer – 18 tool positions Fgsdpfx Ahjtixpuo Dsh Max. working area (X-Y-Z): 6300 x 1450 x 100 mm Min. workpiece size (X-Y-Z): 320 x 115 x 14 mm Max. workpiece size (X-Y-Z): 5600 x 2100 x 38 mm Chip conveyor Supplied with separate electrical control cabinet and control panel. Total connected load: 34 kW WORKING UNITS (TOP): No. 1 vertical main spindle (milling unit), HSK F63, drive power: 18 kW (S6) Fixed 90° saw, diameter 200 mm Edge banding unit (installed on the machine) VT 100 2-fold coil magazine Combi-unit (flush-trimming/profile scraper) Feed system with brush table No. 6 clamps for securing and moving the panel on the machine vacuum cups Workpiece outfeed with motorized rollers and angle transfer system

Stanje: zelo dobro (rabljeno), ONE-SIDED EDGE BANDING MACHINE (LEFT) Roll material (edge) thickness (min/max) mm: 0.3 / 3 Veneer edges possible in a limited way up to max. 1.0 mm Panel thickness (min/max): 8 mm / 40 mm (with MFA) / 60 mm (without MFA) Feder Ttflspfx Ah Degh Control/software: ICOS Open Feed speed (adjustable) m/min: 6 - 30 Top pressure system with motorized timing belt Spraying device (for liquid anti-stick) Adjustable fence Jointing cutter unit - 08.378 (2 x 4.5 kW) Gluing unit (Hot Melt glue) 04.1570 Pressure zone Edge magazine for rolls (compartment no.): 2 End trimming unit 08.42/30/B (2 x 0.66 kW) 0°-25° (max. 30 m/min) Milling unit 08.055 (2 x 1 kW) 0°-30° Multifunctional unit (radius milling and contour trimming unit) 08.342 CNC controlled (2 x 0.66 kW) servo Profile scraper unit 08.519 Flat scraper unit 08.50 Buffing unit 08.617 (2 x 0.25 kW) Universal milling unit for grooving/rebating and profiling 08.190 (1 x 4.5 kW)

Stanje: zelo dobro (rabljeno), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness for rolls (min/max) mm: 0.3 / 3 – for solid strips mm: max 1 Panel thickness (min/max) mm: 14 / 60 (LASER – Max 50) Control system: ICOS Open Feed speed m/min (adjustable): 6 – 30 Top pressure: V-belt driven Sprayer unit (for liquid anti-adhesive) Adjustable fence, CNC controlled Panel infeed system Jointing cutter unit with CNC control 08.378 (2 x 4.5 kW) Edge pressure zone (CNC controlled) Gluing unit (PUR glue + premelter) 283.201 + 283.203 Gluing unit (premelter with laser) Laser System LASERLINE Spraying unit (for separating fluid) Pressure section + edge magazine for rolls (compartment No.) 36 + 12 End trim unit 08.428 (0.2 kW x 2) Speed up to 30 m/min (0°–25°) Pre-milling unit 08.0555 HS/LS1 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 1) 4 profiles Contour trimming unit (for fine trimming), CNC controlled KFA 30 (0.5 kW x 1) max. 30 m/min Multi-profile scraping unit (CNC controlled) 08.0516 (4 profiles) Fgedpfx Ahei Hn Sro Dsh Flat scraper unit 08.521 Sprayer unit (for polishing fluid) Buffing unit 08.614 (0.25 kW x 4) Universal milling unit for grooving/rabbetting and profiling 2x08.190 (4.5 kW x 2) 90°/180°/270° (CNC)

Stanje: zelo dobro (rabljeno), 4-axis (X-Y-Z-C) CNC machining center for milling, drilling, cutting, and edge banding Fgedpfxeq Nmute Ah Deh Control: ICOS CNC (IMAWOP software) Maximum working area (X - Y - Z) mm: 3100 x 2000 x 100 Maximum working area (X - Y - Z) for edge banding (mm): 3100 x 1925 x 60 No. 6 clamping tables with consoles (number of consoles) - mm 1400 LED set-up aid for vacuum cup positioning (Y-axis) No. 1 vacuum pump (capacity 250 m³/h) Operator protection cabin for working head, safety tread mats No. 1 vertical main spindle (milling unit) HSK F63 (18 kW) Automatic tool changer (carousel type) with 18 tool stations No. 14 independent vertical drilling spindles (2 x 1.2 kW) Cross aggregate with 4 horizontal drilling spindles + grooving saw (max. diameter 125 mm) Edgebanding unit – gluing station (hot melt glue) VT 100 No. 2 edge magazines for rolls OPTIONS: No. 1 adapter unit “FLEX 5” model VARIO NC No. 1 adapter unit for flush or chamfer milling No. 1 adapter unit for flush milling and profile scraping blade No. 1 barcode reader

Stanje: zelo dobro (rabljeno), FLEXIBLE BATCH-SIZE-ONE PRODUCTION AND SINGLE-SIDED EDGEBANDING & FORMATTING LINE Comprising the following machines: M.01) LOADING TABLE AND AUTOMATIC WORKPIECE RETURN SYSTEM "SIRIO" BATCH SIZE ONE M.02) SINGLE-SIDED (right) FORMAT AND EDGE BANDING MACHINE "IMA" Novimat I/R75/690/R3 Panel thickness (min/max) mm 8 / 60 – Working width (min/max) mm 200 / 1300 Coil material (edges) thickness (min/max) mm 0.3 / 3 Control/software: ICOS Open (Batch Size One) Feed speed (adjustable) m/min 6 – 30 Fully automatic panel infeed system in format processing A1 / 15 No. 2 jointing milling units with CNC control 08.378 (4 motors x 4.5 kW) Gluing unit (Hot Melt adhesive + pre-melter) VTG + 283.205 Edgeband magazine for coil material (24 positions) Fgedpfx Aekt Uuash Dsh End trimming unit 08.42 / 30 / B / LS1 (2 x 0.2 kW) 0°-25° Premilling unit 08.055.0.1680 (1 x 0.85 kW) Multi-profile milling unit (CNC controlled) 08.0587 HS/LS1 (2 x 1 kW) Contour milling unit (for fine milling) CNC controlled KFA x20 (1 x 0.5 kW) 20 m/min Multi-profile scraper unit (CNC controlled) 08.516 HS/LS1 Flat scraper unit 08.521 Buffing unit 08.617-2 (2 x 0.18 kW) No. 3 universal milling units for grooving, rebating, and profiling 08.190 (3 x 4.5 kW) CNC controlled – 90°/180°/270° M.03) LOADING AND STACKING SYSTEM "SIRIO"

Stanje: zelo dobro (rabljeno), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max): 0.3 - 3 mm Panel thickness (min/max): 8 - 60 mm Control: ICOS open compact Feed speed (adjustable): 6 - 30 m/min Fedpfxsltmnlj Ah Dsgh Pressure belt, driven – with spraying unit (for liquid anti-adhesive) Panel feeding system: A1 / 15 Adjustable fence – CNC controlled, panel infeed system Barcode reader Joint trimming unit with CNC control 08.379 (2 x 4.0 kW) Radiator for workpiece edge heating Gluing unit (P.U.R. glue + premelter) VTG + 283.203 Edge pressure zone. Edge height setting – CNC controlled. Edge magazine for rolls (number of compartments): 12 End trimming unit 08.42 / 30 / B (0.66 kW x 2) (PNEU 0°-25°) 30 m/min Pre-milling unit 08.0555 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 2) 4 PROFILES HSK 25 Spray unit (for sliding agent) Contour milling unit (for fine milling) CNC controlled KFA x30 (0.5 kW x 1) 30 m/min Multi-profile scraper unit (CNC controlled) 08.516 (4 PROFILES) Flat scraper unit 08.521 Spray unit (for polishing fluid) Buffing unit 08.617 (0.18 kW x 4). Free slot Universal milling unit for grooving, rebating, and profiling 08.190 (4.5 kW x 1)

Stanje: zelo dobro (rabljeno), ONE-SIDED EDGE BANDING MACHINE (LEFT) Edge Thickness in Rolls (min/max) mm: 0.3 / 3 Edge Thickness in Strips (min/max) mm: 3 / 12 Panel Thickness (min/max) mm: 8 / 60 Control: ICOS open TS Feed Speed m/min (adjustable): 4 - 20 Top Pressure: V-belt driven Spraying Unit (for liquid anti-adhesive) Adjustable Fence, CNC controlled Jointing Milling Unit 08.379 (2 x 4.0 kW) Gluing Unit (Hot Melt Adhesive & PUR Glue) 283.1513 Pressure Zone for Edges (CNC-controlled) Edge Magazine for Rolls (compartment no.): 1 End Trimming Unit 08.415 (2 x 0.66 kW) Pre-Milling Unit 08.055 (2 x 1.0 kW) Form Milling Unit (Copying) SKF-L (CNC) 2 x 0.18 kW + 2 x 0.4 kW Fodpfx Aod Nt N Heh Dogh Profile Scraper Unit 08.519 Flat Scraper Unit 08.521 Buffing Unit 08.617-2 (2 x 0.18 kW) Universal Milling Unit for Grooving/Rabbetting and Profiling 08.190 (1 x 4.5 kW) 90°-180°-270° OPTIONAL: Infeed Table 65.152 (mm 500 x 500) The Return Conveyor "GELDMEIER" Mod. ? (Ref. No. Z02009)

Stanje: zelo dobro (rabljeno), SINGLE-SIDED FLEXIBLE EDGE BANDING MACHINE UNIT FOR LOT 1 Edge thickness in rolls (min/max) mm: 0.3 – 3 Panel thickness (min/max) mm: 8 – 60 Control unit: ICOS open Feed speed m/min (adjustable): 7–35 Upper pressure: V-belt driven, spraying unit (for liquid anti-adhesive) Adjustable stop ruler: CNC controlled. Panel infeed system: A2 / 30 Fodpjifnzdjfx Ah Degh Jointing milling unit with CNC-controlled 75.34 (2 x 6.6 kW) Gluing station (P.U.R. adhesive + premelter) 2 – VTG 3-48 + 286.205 Edge pressure zone. Edge height adjustment – CNC controlled. Edge magazine for rolls (compartments No.): 48 End trimming unit 08.42 / 30 / B (0.66 kW x 2) (PNEU 0°–25°) 30 m/min Pre-milling unit 08.0555 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 2) 4 PROFILES Spraying unit (for sliding fluid) Contour milling unit (for fine milling) CNC-controlled KFA x30 (0.5 kW x 1) 30 m/min Multi-profile scraper unit (CNC controlled) 08.516 (4 PROFILES) Flat scraper unit 08.521 (CNC controlled) Spraying unit (for polishing fluid) Buffing unit 08.617 (0.18 kW x 4) No. 3 Universal milling units (CNC controlled) for grooving/rabbeting and profiling 08.190 (4.5 kW x 2 + 6.6 kW x 1)