Ima Bima 410 nakup rabljenega (137)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, potovalna razdalja osi X: 6.000 mm, pomik osi Y: 1.400 mm, pomik po osi Z: 100 mm, največja hitrost vretena: 24.000 obr/min, število osi: 3, Ta IMA BIMA 410 V je bila izdelana leta 2005. Gre za CNC obdelovalni center za les z integriranim enoto za obrobljanje robov. Značilnosti vključujejo delovno območje osi X do 6000 mm, osi Y 1400 mm in osi Z do 100 mm. Glavna moč vretena je 7,5-11 kW, z razponom vrtljajev od 1.500 do 24.000 min⁻¹. Menjalnik orodij ima 18 pozicij. Možnosti obdelave robov pokrivajo debeline od 0,4 do 3 mm. Za več informacij nas kontaktirajte. Prednosti stroja Klodeyap U Aspfx Af Nel Tehnične prednosti stroja • Avtomatski rotacijski menjalnik, 18 pozicij • Vertikalna vrtalna glava z do 21 vreteni (11+10) Dodatne informacije Obrobljalni stroj VT 100 Za štiristransko in čelno obdelavo robov Debelina robu: 0,4-3 mm Višina robu: 14-64 mm

Stanje: rabljeno, Imatronic Numerical Control with ImaWop 8.0 software (software updated in 2020). Working area on the X-axis: 7000 mm. Working area on the Y-axis: 1400 mm. Full table with support plate for positioning suction cups. Suction cups can be manually positioned on the work surface using a laser indicator. No. 2 vertical electrospindles with C-axis and automatic tool changer. Automatic tool changer with 18 positions located at the rear of the machine. Drilling head with 21 spindles arranged as follows: * 11 vertical on the X-axis * 10 vertical on the Y-axis. Edge banding unit with glue pot and pre-melter for EVA glue (new glue pot as of 2023). Nordson pre-melter for PUR bonding on folding panels. No. 1 trimming unit (end trimmer). No. 1 milling unit. No. 1 cross-unit with 4 horizontal drilling lines. No. 1 blowing unit. Edge storage unit with 2 positions. Front carpet protection and safety system. Full safety enclosure (not original IMA). TECHNICAL DETAILS TO BE VERIFIED. Kjdpfxow El Nhe Af Njll

Stanje: rabljeno, Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, Ηλεκτρονικά ελεγχόμενο κέντρο κατεργασίας CNC με: • Τυπικό τραπέζι • Χαλιά ασφαλείας • 1 αντλία κενού 100 m³/ώρα • IMATRONIC-NT • Πλευρικό πλέγμα ασφαλείας δεξιά • Με πόρτα και μπροστινό αριστερά • Φορητή κονσόλα για τη ρύθμιση πείρων και βιδών συγκράτησης Τεχνικά χαρακτηριστικά: • Περιοχή κατεργασίας με τυπικές μονάδες X/Y 6000/1200mm • Μέγιστο ύψος σφιγκτήρα από την άνω επιφάνεια της πλάκας κενού Z1: 100mm • Μέγιστο πάχος πάνελ Z2: ανάλογα με τη χρήση • Ύψος τραπεζιού εργασίας: περ. 1000mm • Εναλλακτική περιοχή πεδίου χωρίς κυκλικό κύκλο X: 2 x 2650mm Ελεύθερος χώρος στο κέντρο X: 700mm • Με επεξεργασία σε κύκλο X: 2 x 2250mm Ελεύθερος χώρος στο κέντρο X: 1500mm • Κεντρική λίπανση • Τροφοδοσία ρεύματος: 3/N/PE, 400/230 V • Λογισμικό IMAwinCAD για μηχανές BIMA, συμπεριλαμβανομένης συγκόλλησης ακμών • IMAWOP Kljdpfjwyvfcex Af Nel • Κύρια άτρακτος HSK F63/διάμετρος κώνου 38mm/12kW/υδρόψυκτη • 1 μονάδα οπής πριονιού • 1 μονάδα πριονιού αυλακώματος • Συγκόλληση ακμής VT 61

Stanje: rabljeno, Leto izdelave: 1994, Lokacija skladišča: Nattheim Kledpfx Afewmm Nro Njl

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, potovalna razdalja osi X: 4.200 mm, pomik osi Y: 1.200 mm, skupna masa: 7.200 kg, največja hitrost vretena: 15.000 obr/min, This IMA BIMA CUT 120/240 was manufactured in 2003. It is a CNC woodworking center with a working area of X: 4200 mm, Y: 1200 mm, and a maximum clamping height of 100 mm. The machine features a main spindle with HSK F63 tool holder and a drive power of 7.5 kW. Additionally, it is equipped with a tool changer magazine holding 18 tools and offers a wide range of drilling and milling capabilities. Contact us for more information about this machine. Ksdpfsx U T Hmjx Af Nell Machine Advantages Quality Features • Drive power: 7.5 kW in S1 mode • Spindle lubrication: permanent grease lubrication from factory • Spindle cooling: water cooling • The automatic tool/adapter changer magazine features a disk changer design with 18 coded magazine slots and moves with the support along the X axis. • The adapter units include a sawing unit (max. 15,000 rpm, 200 mm blade), a horizontal drilling and milling head with 4 spindles (max. 15,000 rpm), a drilling unit for lock cases or sash holes (max. 12,000 rpm), a vertical drilling unit S21 (6,000–9,000 rpm, max. 35 mm drilling diameter), and a horizontal drilling/sawing unit (4,500–6,000 rpm, max. 125 mm groove saw, swiveling range 0 or 90 degrees). • Graphical user interface: imawop for PC • Bima Cut Editor Office • Bima Cut Editor Import Interface • Controller for label printer • Label printer Technical Features • Max. clamping height from top of suction cup Z1: 100 mm • Workpiece thickness Z2: 14 – 38 mm • Working table height: approx. 1000 mm • Alternate field machining area without pendulum operation X: 2 x 2000 mm • Central clearance X without pendulum operation: 200 mm • With pendulum operation X: 2 x 1500 mm • Central clearance X with pendulum operation: 1200 mm • Automatic tool feed • Feed force: 11,000 N • Rotation direction: programmable, clockwise/counterclockwise Additional Information Machine still under power

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 1.000 mm, proizvajalec krmilnikov: SIEMENS, skupna masa: 5.000 kg, največja hitrost vretena: 9.000 obr/min, moč vretenovega motorja: 12.000 W, število osi: 3, Additional Equipment • 1 vertical drilling unit in Y-direction • 1 vertical drilling unit in X-direction • 1 main spindle with programmable rotation direction • 1 centrally integrated CNC axis, rotatable 360 degrees • 1 saw adapter unit, fixed at 90 degrees • Saw blade diameter: 200 mm • 1 adapter unit for horizontal drilling and milling head (crosshead) • 1 adapter unit for horizontal milling cutter (face milling) • 2x adapter units for hinge drilling • Includes 1 new Siemens vacuum pump + extensive accessories Machine Advantages Technical Machine Advantages • Max. clamping height from top edge of suction plate: z1 100 mm • Working height: 950 mm • Traverse speed: 20 m/min • Acceleration: 5 m/s² • Alternating field area without pendulum operation: x 2 x 1400 mm • Clear space in the center: x 200 mm • With pendulum operation: x 2 x 900 mm • Clear space in the center: x 1200 mm • Automatic tool feed • Feed force: 11,000 N Additional Information Media Extraction standard: Connections for 200 mm, 120 mm, and 100 mm diameters Extraction speed: approx. 28 m/sec Extraction volume: approx. 3,200 m³ per hour 1 vacuum pump 40 m³/h Compressed air supply: Central connection for 1/2" with maintenance unit. Constant air pressure 6 bar Electrical Equipment Klodjx N Ulmspfx Af Nel Electrical installation according to EN Control cabinet dimensions (HxWxD): 2000 mm / 1200 mm / 600 mm Safety and protection measures in accordance with CE regulations

Stanje: zelo dobro (rabljeno), 5-axis (X-Y-Z-C-5) CNC machining center for milling, drilling, cutting, and edge banding. Gantry design – safety tread mats. PC control type: ICOS OPEN CNC – IMAWOP software. Worktable: console table (No. 8 console tables, each 1400 mm). Console tables with LED / diode light strips. Automatic tool change system (magazine – 18 tool positions). Working area (X-Y-Z): 4000 x 2100 x 300 mm. Working area for edge banding (X-Y-Z): 4000 x 1800 x 60 mm. No. of working zones: 2. Vacuum pump / capacity (m³/h): 140. Chip conveyor. Separate electrical and control cabinets. Kljdpfehu U Nxox Af Nel Total connected load (kW): 32. Working units (top): - 21 independent vertical drilling spindles (4 x 1.2 kW) - 1 vertical main spindle (milling unit) HSK 63 ROBOT (16 kW) - Edge banding unit (hot melt glue) VT 100. Edge material (rolls): thickness (min/max): 0.4 / 3 mm. Edge magazine for rolls (2 compartments). OPTIONS: - Saw unit, max diameter 200 mm. - Combination unit (flush milling & profile scraper). - Drilling head (with 4 horizontal drilling spindles).

Stanje: zelo dobro (rabljeno), CNC MACHINING CENTER (POINT-TO-POINT) – 5 Axes (ROBOT head) Gantry design construction Control: ICOS CNC – Software: IMAWOP / (OPTION IMAwinCAD) Safety cabin for machining head Clamping table with 8 consoles LED positioning system on the X-axis for console positioning and on the Y-axis for vacuum clamp positioning Automatic tool change system 2 disk-type tool changers – Magazine/tool stations (8 each) + TC8 (18 stations) Maximum working area (X-Y-Z): 4300 mm x 1300 mm (1410 mm) x 350 mm 2 working zones – Vacuum pump (capacity in m³/h): 140 Separate electrical and control cabinet. Total power connected (kW): 23 WORKING UNITS (TOP): Klsdpfx Aefin Sajf Nol 21 independent vertical drilling spindles 4 independent horizontal drilling spindles (drilling head motor power: 1.2 kW x 4) 1 grooving unit, 125 mm diameter, swivels 90° in X-Y direction 1 vertical main spindle (milling unit), robot head (HSK F63) Vertical main spindle power (kW): 9 Independent Z-axis travel: 650 mm A-axis arranged/mounted at a 90° angle to the C-axis C-axis rotation range: 420°, A-axis rotation range: 140°

Stanje: zelo dobro (rabljeno), 4-axis (X-Y-Z-C) CNC machining centre for milling, drilling, cutting, and edgebanding Control: IMAtronic 231 (Software: IMAWOP) Maximum working area (X - Y - Z) mm: 5000 x 1630 x 100 Maximum working area for edgebanding (X - Y - Z) mm: 3900 x 1450 x 60 No. 8 clamping tables with consoles (number of consoles) - 1200 mm LED setup assistance for vacuum cup (sleeve) positioning (Y-axis) 1 vacuum pump (capacity 140 m³/h) Safety enclosure for working head, safety foot mats Chip conveyor No. 2 vertical main spindles (milling units), HSK F63 (1 x 11 kW + 1 x 7.5 kW) Automatic tool change system (disc changer) with 18 tool positions No. 21 independent vertical drilling spindles (4 x 1.2 kW) No. 6 independent horizontal drilling spindles (1 x 3 kW) Kodpfsfbmqtox Af Noll Edgebanding unit – gluing module (hot melt glue) VT 50 Edge magazine for rolls (6 compartments) OPTIONAL: 1 adapter unit for saw, fixed 90 degrees, max diameter 200 mm 1 adapter unit for flush milling and profile pull blade 1 adapter unit horizontal drilling & milling head (cross head) with 4 horizontal spindles

Stanje: zelo dobro (rabljeno), 4-axis CNC-controlled MACHINING CENTER Gantry-type construction, ICOS-Open control system. Software: IMAWOP / IMATRONIC - BIMA Fast Cut Clamping table with consoles. No. 6 consoles (1400 mm) Automatic positioning of the consoles (X-axis) Automatic positioning of the vacuum clamps (Y-axis) Automatic tool change system Rotary changer – magazine with 18 tool slots Maximum working area (X – Y – Z): 4250 x 1600 x 60 mm Minimum workpiece dimensions (X – Y – Z): 295 x 115 x 14 mm Maximum workpiece dimensions (X – Y – Z): 4250 x 2200 x 60 mm Chip conveyor Separate electrical and control cabinet. Total connected load: 28 kW WORKING UNITS (TOP): Kljdpfx Aevxhnuof Nsl Vertical main spindle (milling unit) HSK F63 – power: 14.5 kW (S6) / 7.5 kW (S1) No. 3 grippers for clamping and moving the panels onto the machine’s vacuum cups No. 5 air tables for staging panels before processing Vacuum system with program-controlled suction for lifting panels onto the conveyor belt Panel discharge system with motorized conveyors

Stanje: zelo dobro (rabljeno), 4-axis (X-Y-Z-C) CNC machining center for milling, drilling, cutting, and edge banding Gantry design, equipped with ICOS-Open control system. Software: IMAWOP + IMAwinCAD. Set-up table with consoles. Number of consoles: 6 (1450 mm) DYNAPOINT Automatic positioning of consoles (X-axis) Automatic positioning of vacuum clamps (Y-axis) Automatic tool changer – 18 tool positions Ksdpfx Afjtixpuo Njll Max. working area (X-Y-Z): 6300 x 1450 x 100 mm Min. workpiece size (X-Y-Z): 320 x 115 x 14 mm Max. workpiece size (X-Y-Z): 5600 x 2100 x 38 mm Chip conveyor Supplied with separate electrical control cabinet and control panel. Total connected load: 34 kW WORKING UNITS (TOP): No. 1 vertical main spindle (milling unit), HSK F63, drive power: 18 kW (S6) Fixed 90° saw, diameter 200 mm Edge banding unit (installed on the machine) VT 100 2-fold coil magazine Combi-unit (flush-trimming/profile scraper) Feed system with brush table No. 6 clamps for securing and moving the panel on the machine vacuum cups Workpiece outfeed with motorized rollers and angle transfer system

Stanje: zelo dobro (rabljeno), 4-axis (X-Y-Z-C) CNC machining center for milling, drilling, cutting, and edge banding Control: ICOS CNC (IMAWOP software) Maximum working area (X - Y - Z) mm: 3100 x 2000 x 100 Maximum working area (X - Y - Z) for edge banding (mm): 3100 x 1925 x 60 No. 6 clamping tables with consoles (number of consoles) - mm 1400 LED set-up aid for vacuum cup positioning (Y-axis) No. 1 vacuum pump (capacity 250 m³/h) Operator protection cabin for working head, safety tread mats No. 1 vertical main spindle (milling unit) HSK F63 (18 kW) Automatic tool changer (carousel type) with 18 tool stations No. 14 independent vertical drilling spindles (2 x 1.2 kW) Cross aggregate with 4 horizontal drilling spindles + grooving saw (max. diameter 125 mm) Edgebanding unit – gluing station (hot melt glue) VT 100 No. 2 edge magazines for rolls Kjdpfx Afsq Nmuts Njll OPTIONS: No. 1 adapter unit “FLEX 5” model VARIO NC No. 1 adapter unit for flush or chamfer milling No. 1 adapter unit for flush milling and profile scraping blade No. 1 barcode reader

Stanje: zelo dobro (rabljeno), 5-axis (X-Y-Z-C+ 5°) CNC MACHINING CENTER (POINT-TO-POINT) CNC machining center for milling, drilling, cutting, and edge banding Control: ICOS CNC (IMAWOP software) Maximum working area (X - Y - Z) mm: 4000 x 1600 (2000) x 100 (Z-axis travel 650 mm) Maximum working area (X - Y - Z) for edge banding (mm): 4000 x 1600 x 100 No. 8 clamping tables with consoles (number of consoles) – 1400 mm LED setup assistance for vacuum cup (socket) positioning (Y-axis) No. 2 vacuum pumps (capacity 140 m3/h) Safety enclosure for machining head, safety tread mats Chip conveyor Klsdpfxjw A Ruqj Af Nsl No. 1 vertical main spindle (milling unit) ROBOT HEAD HSK F63 (16 kW) Automatic tool changer (rotary magazine) with 18 tool positions No. 21 independent vertical drilling spindles (4 x 1.2 kW) No. 8 independent horizontal drilling spindles (4 in X + 4 in Y) Grooving saw unit (swivels 90° in X-Y direction), diameter 200 mm Edge banding unit (PUR glue + pre-melter 283.203) VT 100/100 WITH 45° SWIVEL EDGE BANDING UNIT No. 2 edge magazine for rolls OPTIONS: No. 1 adapter unit for flush or chamfer milling No. 1 adapter unit for flush milling and profile scraper

Stanje: rabljeno, številka stroja/vozila: 006054, Delovno območje os X: 5300 mm Delovno območje os Y: 1300 mm Delovna površina: z vakuumskimi konzolami Moč glavnega vretena: 9 kW Število upravljanih osi: 5 osi Število vrtalnih vretenc: 32 Število mest za orodja: 8 Ksdjwcx T Ujpfx Af Noll

Leto izdelave: 2008, Stanje: pripravljen za uporabo (rabljen), Glavni pogon Število osi: 4 Ta 4-osni CNC obdelovalni center IMA BIMA 400 140 / 430 je bil izdelan leta 2008. Opremljen je z glavnim vretenom moči 7,5 kW, NC rotacijsko osjo ter 18-pozicijskim magazinom za menjavo orodij. Vključuje 14-vreteno vrtalno enoto ter 5-osno enoto za žaganje/rezkanje/vrtanje, kar omogoča široke možnosti obdelave. Izkoristite priložnost za nakup tega CNC obdelovalnega centra IMA BIMA 400 140 / 430. Kontaktirajte nas za več informacij o tej napravi. Klsdsx D Nylopfx Af Njl Področja uporabe CNC obdelava lesa

Leto izdelave: 2014, Stanje: pripravljen za uporabo (rabljen), Glavni pogon Število osi: 3 Klodjx D Nitopfx Af Nel Ta 3-osni CNC obdelovalni center za les IMA BIMA CUT 145/330 je bil izdelan leta 2014. Ponaša se z delovnim območjem 3300 mm na osi X in 1450 mm na osi Y ter močjo vretena 18 kW. Stroj je opremljen z orodnim magazinom za do 18 pozicij in vakuumskim vpenjalnim sistemom za varno pritrditev obdelovanca. Če iščete visoko kakovostne možnosti rezkanja, razmislite o stroju IMA BIMA CUT 145/330, ki ga imamo v prodaji. Kontaktirajte nas za več informacij. Vrste uporabe CNC obdelava lesa

Leto izdelave: 2006, Stanje: pripravljen za uporabo (rabljen), Splošni podatki Teža stroja: 6200 kg Glavni pogon Območje hitrosti vretena: 8000–24000 Število osi: 3 Ksdpfox D Rt Hox Af Nell Pomik Pomik po X-osi: 3000 mm Pomik po Y-osi: 1200 mm Pomik po Z-osi: 100 mm Ta 3-osni IMA BIMA 210 120/300 je bil izdelan leta 2006. Odlikuje ga velik hodi osi (X = 3000 mm, Y = 1200 mm, Z = 100 mm), kar omogoča obdelavo obdelovancev dolžine do 2800 mm in širine do 1200 mm. Glavno vreteno ima moč 7,5 kW z območjem vrtljajev od 8.000 do 24.000 min⁻¹. Teža stroja znaša približno 6200 kg in vključuje CNC krmilje IMA IMATRONIC. Za dodatne informacije o stroju nas kontaktirajte. Uporaba CNC obdelava lesa

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, obratovalne ure: 80.859 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 6.000 mm, pomik osi Y: 1.630 mm, TEHNIČNI PODATKI X-pomik brez lepljenja: 6.000 mm X-pomik z lepljenjem: 5.000 mm Y-pomik: 1300 mm Y-pomik z glavno vreteno + premer orodja 20 mm: 1630 mm Y-pomik z lepljenjem: 1450 mm Pripravljalna miza: Dyna Poin BIMA 410 V Kodpfx Aox Af Ivjf Njll Zasedenost: 4 mesta Enota za obrobljanje robov: prisotna Delovne ure: 80.859 h

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, 4-axis CNC machining center with console table and edge banding unit Manufacturer: IMA Model: BIMA 400 V Year of manufacture: 2009 - 8 manually adjustable supports along X-axis - 3 vacuum suction cups per console - Vacuum pump 100 m³/h -2* - Vacuum connection for templates - LED display for suction cup position indication - Working area X: 200 – 6150 mm - Working area Y: 0 – 1600 mm for milling/drilling, up to 1525 mm with edge banding - Working area Z: 12 – 125 mm (clearance 150 mm) - 14 vertical drilling spindles - Horizontal drilling and grooving saw unit, swiveling 90° - Milling spindle 11 kW / 7.5 kW up to 24,000 rpm - With C-axis, 360° interpolation, liquid circulation cooling - 18-position tool changer mounted on Y-support - VT 100 edge banding unit, 4-sided/complete, rotation range 740 degrees - With 2-position roller magazine, automatic granule feed Adapter units: – Fixed saw 90° – 5-axis saw/drill/milling unit, Vario NC – Horizontal milling head (corner notching) – Flush milling and profile scraper with flat scraper extension - ICOS open control with 17″ TFT - ImaWop 6.0 including MDC and production list software - Chip conveyor - Side safety fencing and front safety mats - Rear: wall installation or separate safety protection required Kledpsxrltksfx Af Nol

Leto izdelave: 2001, Stanje: dober (rabljeno), IMA gluing unit Spare part for e.g. IMA 680 / 480 / 980 Edge banding unit for 4-sided edging and all-round bonding on butt joints with: - Main pressure roller, diameter 100 mm, and pneumatically controlled secondary pressure roller, diameter 35 mm - Glue application for coating the edge material, with temperature and level control - Servo drive for edge feed with automatic adjustment to feed speed - Hot air post-activation unit 7.5 kW, on the Kedpfjbxx Ikjx Af Njll glue side - IR emitter 600 watt on the decorative side for preventing material deformation on small radii - Pneumatically driven cross-cut saw - Butt joint detection - NC axis Rotation range up to 740 degrees, pneumatic Z-stroke 125 mm - Separate NC axis in Y (in portal applications X) operating independently from the main axis Part year: 2001, taken from IMA 680 V No. 2216 Scope of delivery as shown Please check if this part can be installed in your machine. No returns possible. The unit was in production use for approx. 2 years and is in good condition. Technical data subject to change.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, 4-Axis Machining Center IMA BIMA 300 Year of Manufacture: 2009 Technical Condition: Very Good Technical Data: - Working table: 4,300 × 1,250 mm - 8 consoles (24 suction cups) - Main spindle: 7.5 kW (max. 11 kW), 1,500–18,000 rpm - Tool magazine: 18 positions - IMA 14 drilling unit - Tool set - 2 × vacuum pump 90 m³/h - Safety mats – alternating mode operation - IMAWOP software on machine + 1 office license - Emergency computer power supply - Control cabinet air conditioner - Main spindle unit for horizontal drilling - Max. feed rates: X 60 m/min, Y 60 m/min, Z 30 m/min - Dust extraction: as per connection diagram; air velocity v = 28 m/s; central port Ø 250 mm - Weight: approx. 5,500 kg - Compressed air: ¾" connection, 6 bar; dry operation (dryer recommended if the system does not comply) - Electrical installation: main switch in separate control cabinet; operated from separate control panel; complete electrical cabinet with monitoring; all safety features comply with CE; typical cabinet dimensions (H/W/D) approx. 2000×1200×800 mm; power supply 400/230 V, 50 Hz - Environmental conditions: permissible ambient temp. +15…+35 °C (without cabinet air conditioner) - CNC control Kodpfx Aow R S Dnef Njll - Controller: ICOS OPEN 321 (PL language version) - Interpolation: linear simultaneous for 3 axes; circular 2½D for two axes in any of the three planes - Selected IMAWOP functions: operation selection (drilling, milling, grooving); graphics update after corrections; drilling time optimization; graphical cup positioning; conditional/formula programming; technology and tool databases; alphanumeric names/descriptions (up to 28 characters); subprograms; manual entry of machining sequence; disturbance messages; acceleration/braking adjustment (accuracy to 0.001 mm); automatic referencing; corrections from portable panel Additionally: IMAWOP machining program

Stanje: rabljeno, številka stroja/vozila: 007485, Pozicija 1: Krožna žaga za plošče v kotni izvedbi IMA-COMBIMA SYSTEM + AH6 Pozicija 2: Razkladalec IMA-COMBIMA SYSTEM + AH6 Kjdpfjwuz Aiex Af Nell Pozicija 3: Razkladalec IMA-COMBIMA SYSTEM + AH6 Pozicija 4: Obratnik za plošče IMA-COMBIMA SYSTEM + AH6 Pozicija 5: Robilnik LottoUno IMA-COMBIMA SYSTEM + AH6 Pozicija 6: Robilnik LottoUno IMA-COMBIMA SYSTEM + AH6 Pozicija 7: Robilnik LottoUno IMA-COMBIMA SYSTEM + AH6 Pozicija 8: Robilnik LottoUno IMA-COMBIMA SYSTEM + AH6 Pozicija 9: Obratnik za plošče IMA-COMBIMA SYSTEM + AH6 Pozicija 10: Razkladalec IMA-COMBIMA SYSTEM + AH6 Pozicija 11: Transfer IMA-COMBIMA SYSTEM + AH6

Stanje: rabljeno, številka stroja/vozila: 006017, Pozicija 1: Vertikalno skladišče IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pozicija 2: Formatna žaga v kotni izvedbi IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pozicija 3: Nakladalnik IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pozicija 4: Transfer IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pozicija 5: Robna lepilka, serija 1 IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pozicija 6: Transfer IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pozicija 7: Robna lepilka, serija 1 IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pozicija 8: Transfer IMA-COMBIMA SYSTEMS/N/I/R75/1110 Kledpfewukzhjx Af Nsl Pozicija 9: Robna lepilka, serija 1 IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pozicija 10: Transfer IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pozicija 11: Robna lepilka, serija 1 IMA-COMBIMA SYSTEMS/N/I/R75/1110 Pozicija 12: Transfer IMA-COMBIMA SYSTEMS/N/I/R75/1110

Stanje: rabljeno, številka stroja/vozila: 005635, Pozicija 1: Nakladalec IMA + MEINERT-COMBIMA/II/650/A/R3 Pozicija 2: Dvostranski robni lepilni stroj IMA + MEINERT-COMBIMA/II/650/A/R3 Pozicija 3: Obratnik plošč IMA + MEINERT-COMBIMA/II/650/A/R3 Kjdpswuudyofx Af Noll Pozicija 4: Dvostranski robni lepilni stroj IMA + MEINERT-COMBIMA/II/650/A/R3 Pozicija 5: Obratnik plošč IMA + MEINERT-COMBIMA/II/650/A/R3 Pozicija 6: Razkladalec IMA + MEINERT-COMBIMA/II/650/A/R3

Stanje: rabljeno, številka stroja/vozila: 007514, Pozicija 1: Transfer IMA-COMBIMA SYSTEM I Pozicija 2: Robilnik LottoUno IMA-COMBIMA SYSTEM I Pozicija 3: Transfer IMA-COMBIMA SYSTEM I Pozicija 4: Robilnik LottoUno IMA-COMBIMA SYSTEM I Pozicija 5: Transfer IMA-COMBIMA SYSTEM I Pozicija 6: Robilnik LottoUno IMA-COMBIMA SYSTEM I Pozicija 7: Transfer IMA-COMBIMA SYSTEM I Pozicija 8: Robilnik LottoUno IMA-COMBIMA SYSTEM I Pozicija 9: Transfer IMA-COMBIMA SYSTEM I Kedpfx Aowukznjf Nell