Ima Bima 410 nakup rabljenega (134)

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED LOADING STATION Casdpfjfi Tg Hjx Afqsa Vacuum system (with pump) No. 2 vertical support columns for the upper support beam No. 1 upper horizontal support beam (on which the carriage slides) No. 1 motorized carriage with horizontal metal arms External roller conveyor (on the floor) for loading the stack of panels onto the loading station External motorized roller conveyor (for receiving panels from the loading station) Separate electrical control panel Perimeter safety fencing with safety mats Working capacity (cycles/min) approx. 16 Panel thickness (min/max) mm 10 / 50 (approx.) Min. panel dimensions mm 250 x 320 (approx.) Max. panel dimensions mm 1300 x 3000 (approx.) Total connected load kW 30

Stanje: rabljeno, Leto izdelave: 2006, IMA Novimat Edge Banding Machine: Manufacturer: IMA Model: Novimat Concept/I/G/80/650/R3 Year of manufacture: 2006 Machine No.: 08113 Rated power: 41 kW Workpiece feed: Sliding chain Fence ruler: Adjustable fence ruler 700.080 Infeed table: 63.152 Milling unit: 08.378 Glue level monitoring: Available Glue application station: 04.0832 Bonding unit: 04.1570 PU pre-melter: 283.203 High-speed tool holder: For high-speed motors Cut-off unit: 08.42 Milling unit: 08.0555 Multi-processing unit: 08.348 Multi-profile scraping blade device: 08.516 Flat scraper: 08.517 Corner copying buffing unit: 08.604 Buffing unit: 08.617-4 Safety features: Light barriers, temperature controller, control terminal Additional equipment: Upstream roller conveyor table Total machine length: approx. 11/16 m Extraction system: Included Cajdpornkw Djfx Afqoa Accessories: Edge magazines: 2 sliding magazines for edge rolls, each holding 12 rolls, mobile Plasma edge heating (PLASMATREAT Düstec): 2 plasma devices Control cabinet Panel return system (Manufacturer: VENJAKOB): Components: 7 belt conveyor tables, belt width approx. 100 cm, varying table lengths Round belt conveyor table Control cabinet system 2 angle transfer tables Peripheral equipment for edge processing line: Consisting of: Interface system Barcode scanning system

Stanje: rabljeno, Leto izdelave: 2004, Gebrauchter 75-Liter-IMA VORTEX 075 Edelstahl-Mischgranulator. Gesamtbehältervolumen 75 Liter, Arbeitsvolumen ca. 20–50 Liter. Behälter mit Doppelmantel (für Beheizung oder Kühlung). Hauptmischer angetrieben von 3,0 kW Motor. Zerkleinerungsmesser angetrieben von etwa 1,5 kW Motor. Behälterdeckel pneumatisch öffnend. Zusätzlich mit oben montiertem Edelstahl-Staubfilter ausgestattet. Seitlicher Auslass mit pneumatisch betätigtem Ventil. Inklusive lokaler Bedienpulte und Hauptschaltschrank. Cedpfx Afjwm Atmeqjaa

Stanje: dober (rabljeno), Leto izdelave: 2014,

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Filling and Packaging Line for 50 ml Vials 1. Vial Loading Machine: Rotary Table, SSS Conveyor Technology, Year of Manufacture 2007 Empty or already filled and sealed 50 ml vials are manually placed onto a rotary table. From there, they are singulated onto the conveyor belt and fed into the next stages of the line. 2. Labelling with Print and Camera Inspection Machine: Pago System 520, Year of Manufacture 2007 Printing System: Domino 320i Thermal Transfer Printer Camera System: Cognex (integrated into Pago) The vials are labelled with self-adhesive labels. During labelling, batch numbers, expiry dates, etc. are printed directly onto the label via thermal transfer (Domino). At the same time, a camera-based inspection (Cognex) is performed on the printed data. The inspection results are displayed on an integrated screen. Both the printing and camera systems are fully integrated into the Pago labelling machine. 3. Changing Vial Orientation (Vertical to Horizontal) Machine: FlexLink Conveyor XH, SSS Conveyor Technology, Year of Manufacture 2016 The labelled vials are moved to a horizontal position via a vial orienter to prepare them for insertion into the cartoner. 4. Cartoning with Leaflet Insertion Machine: MK-120, Harro Höfliger, Year of Manufacture 2007 Preformed folding cartons are automatically erected in the cartoner. Simultaneously, a leaflet is folded and provided by a GUK folding machine. One 50 ml vial and one leaflet are automatically inserted into each folding carton. In the configuration shown here, the base of the carton is sealed with hot glue and the top is closed with a tuck-in flap. Optionally, with existing format parts, the machine can be converted to double tuck-in flaps without glue sealing. 5. Serialization and Camera Inspection Machine: Laetus PrintSpect TTS MV-70, Year of Manufacture 2015 After the cartoner, the folding cartons are printed (thermal transfer) with serial numbers and variable data and then fully inspected by a Laetus camera system. This station was retrofitted in 2015. The Harro Höfliger MK-120 also has an integrated Wölke printing system, which is not used here. 6. Tamper-Evident Labelling Machine: Pago System, Year of Manufacture 2007 Codpfxoxb Uptj Afqoaa The serialized folding cartons are sealed on the tuck-in flap sides with tamper-evident labels. To do this, the cartons are precisely aligned and guided via side belts. 7. Case Packing Machine: IMA CP18BA Case Packer, Year of Manufacture 2007 The finished individual cartons are pneumatically pushed into shipping cases. The case packer seals the shipping cases with hot glue. 8. Final Labelling of Shipping Cases Machine: Laetus VL4 C2 ICMV Cabinet + Pago Labeller, Year of Manufacture 2015 The finished shipping cases are labelled via thermal transfer printing. No camera-based inspection is performed at this station. This unit is used exclusively for labelling shipping cases (no serialization or aggregation). 9. Inspection (optional) A manual checkweigher is also available but is not included in the sale and was only used for internal final inspections. Line available from Jan. 2026. Further information to follow.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, A complete can feeding, counting, and closing line including labeling and cartoning is available. 1) Can Feeder IMA Swiftpack UN 800S, year of manufacture: 2007, output: 60 cans/min, formats (diameter/height): 45mm/51.5mm, 45mm/84mm, 45mm/96mm, 60mm/80mm, 60mm/122mm. 2) Counting Machine Cremer CF 1220, year of manufacture: 2002, counting speed: 1000 products/min, counting heads: 1, channels: 12, formats: capsules (HGK & WGK) and tablets (round & oblong), including one spare cylinder for storage flaps. 3) 2x Rotary Tables Höflinger & Karg S1, table diameter: 1000mm. 4) Cap Closing Machine (Screw Capper) CBV Servo, year of manufacture: 2019, closing speed: 40 closures/min, cap diameter range: 23mm-100mm. 5) Cap Closing Machine (Crimp Capper) Rudolf Deckert AVM 738, year of manufacture: 2003, closing speed: 50 cans/min, can diameters: 45mm/60mm, cap formats (diameter/height): 42.4mm/17.15mm, 50mm/12mm. 6) Can and Bottle Labeler IMA Sensitive 350, year of manufacture: 2009, labeling capacity: 350 units/min, can and bottle diameter range: 15mm-78mm, max. product height: 220mm, label length range: 15mm-220mm, label height range: 10mm-140mm, equipped with hot printer Allen Coding Set S-Compact 50/30 and camera Keyence IV 500 CA. 7) Can and Bottle Cartoner Uhlmann C100, year of manufacture: 1988, cartoning speed: 70 cans/min, max. can/bottle diameter and height: 60mm/120mm, carton length range: 30mm-113mm, carton width range: 15mm-85mm, carton height range: 70mm-130mm. The machine was converted in 2017 for cans and bottles and equipped with a Mitsubishi D700-SC control, including GUK Cartonac 91 folding unit, 3x code readers and luminescence control. 8) Coding and Inspection System Wipotec TQS-HC-A for serialization, tamper evident, and weighing, year of manufacture: 2017, inspection speed: 300 products/min, including 2x label dispensers Herma 400, double print head (2 cartridges), camera for print inspection, weighing cell with weigh belt, and hand scanner. 9) Bundler (Tight Bundler) Christ FilmTeq 3030, year of manufacture: 2011, infeed: 50-200 cartons/min, outfeed: 7-50 bundles/min, carton length range: 15mm-400mm, carton width range: 15mm-90mm, carton height range: 60mm-150mm, bundle length range: 60mm-400mm, bundle width range: 60mm-150mm, band height range: 30mm-230mm. Documentation available. An on-site inspection is possible. Caodpfxjwa Tixs Afqsa

Stanje: zelo dobro (rabljeno), Zum Aufbringen von Kantenbändern auf gerade, runde und profilierte Werkstücke Cjdpfshgbfaex Afqeaa - Manuelle Zuführung der Werkstücke - Mit Leimbecken und Leimauftragswalze - Mit Rollen-/Spulenhalte-Tisch - Min./Max. Werkstückdicke: 16 / 40 mm - Kantenstärkenbereich: 0,4 bis 3 mm - Schwenkbarer Tisch 0°-45° - Gesamtanschlussleistung ca. 4 kW

Leto izdelave: 1955, Stanje: rabljeno, used Manufacturer: IMA Model: B55 Caodpfx Ajvwf Szsfqea Year of manufacture: 1955 Machine No.: 0/650 Press cylinders: pneumatic, 4 units Table size: 2900 x 1300 mm Working height: 750 mm Max. material thickness: approx. 200 mm Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition Without warranty or guarantee

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, Dieser IMA Advantage 310 Kantenanleimer wurde 2010 hergestellt. Er verarbeitet Werkstücke ab 150 mm Länge und 65 mm Breite bei Materialstärken bis zu 60 mm. Die Maschine ist für verschiedene Materialien wie Spanplatten und MDF geeignet und kann Kanten aus Melamin, Papier, Folie oder Echtholz-Furnier anbringen. Ausgestattet ist sie unter anderem mit einer Leimstation, einer Endabschneideeinheit und einer Poliereinheit, was die Bearbeitungsqualität erheblich verbessert. Nutzen Sie die Gelegenheit, diesen IMA Advantage 310 Kantenanleimer zu erwerben. Kontaktieren Sie uns für weitere Informationen zu dieser Maschine. Anwendungsbereiche Kantenanleimen Cjdpjwtiu Dofx Afqjaa

Stanje: dober (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 08420, skupna dolžina: 11.500 mm, največja debelina roba: 3 mm, skupna masa: 8.500 kg, priključek za stisnjen zrak: 7 letvica, Used single-sided IMA edge banding machine for straight edges, for jointing, edge banding, and post-processing of various edge materials. Fixed fence on the right side. Workpiece and Material Dimensions: - Min. workpiece length: 150 mm - Min. workpiece width: 65 mm - Min. workpiece thickness: 8 mm - Max. workpiece thickness: 40 mm (with corner rounding / copying) - Max. workpiece thickness: 60 mm (without corner rounding / copying) - Smallest workpiece: 150 x 150 mm or 300 x 65 mm - Workpiece overhang: 38 mm - Edge thickness min/max: 0.3 – 3.0 mm - Edge width min/max: 14 – 65 mm EQUIPMENT / SPECIFICATION - Base machine - Workpiece transport with 80 mm wide feed chain (chain plate width) - Feed speed 6 to 30 m/min, steplessly adjustable via input unit - Upper pressure with spring-loaded guide rollers and 70 mm wide composite timing belts - Automatic height adjustment (workpiece thickness) - Workpiece support with roller rails, extendable up to approx. 600 mm - IMA 63.152 infeed table, 500 x 500 mm, for safe and precise feeding of long and narrow parts - Manual infeed device, can be raised/swiveled, with 5 driven, inclined rollers from above - Adjustable infeed fence with NC axis UNITS / EQUIPMENT - Jointing Unit IMA 08.378, 2 motors each 4.5 kW, with engagement control, tool Ø 125 mm, electronic horizontal positioning - Gluing section 04.1570 Concept, driven glue roller with automatic stop in case of malfunction, quick-lock system for glue application unit, glue roller lift-off when feed stops, edge feed monitoring via fiber optics, pressure device with stepper motor adjustment Codpfxswyp Nuo Afqjaa - Automatic PUR melting system IMA 283.203 - Edge magazine with automatic 6-roll changer POST-PROCESSING SECTION: - End trimming unit IMA 08.42, horizontal working movement, 2 motors each 0.65 kW, 200 Hz, for straight and chamfered trimming, max. working speed 30 m/min - Fine milling unit IMA 08.055, 0.66 kW 400V 200Hz, top/bottom, HSK 25 - Corner rounding (copying IMA) 08.348, 2 motors 0.66 kW 400V 200Hz, HSK 25, max. working speed 20 m/min - Profile (radius) scraper 08.516, top/bottom, for multiple profile tools, automatic positioning via stepper motors, max. 4 profiles, electro-pneumatic engagement/disengagement - Spray device for cleaning agent - Flat scraper 08.521 (glue joint), top/bottom - Profile (corner) buffing unit 08.604, 4 motors - Buffing unit 08.617, top/bottom CONTROL / SOFTWARE: • Control system ICOS Open Compact • Edge tracking control • Uninterruptible power supply (UPS) • Power supply 400 V, 50/60 Hz, control voltage 24 VDC / 230 VAC Machine dimensions: L 1150 x W 300 x H 260 cm Availability: approx. October 2025

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Year of manufacture: 2009 Manufacturer: IMA Technical condition: Good, regularly serviced. Pre-milling cutters: New, installed about a month ago, diamond-tipped. Flat scrapers: Replaced with an upgraded version, as visible in the attached photos. Technical documentation: Available as a PDF file upon request. Additional information: Caodpfjrur Urox Afqsa The machine operates efficiently thanks to the recently installed pre-milling cutters, which have been in use for approximately one month. The flat scrapers have also been upgraded to a better version, which can be clearly seen in the attached photos. Please feel free to contact us by phone for further information or to arrange an inspection of the machine. The technical documentation in PDF format is also available to provide full transparency regarding the machine’s specifications and operation.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, Carton width range: 28mm-92mm, carton height range: 14mm-60mm, carton length range: 55mm-190mm, max. total cross-section (width + height): 140mm, packaging output: 120 cartons/min, machine dimensions X/Y/Z: approx. 2550mm/1250mm/1800mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible. Cajdpfx Asv Suhbsfqea

Stanje: zelo dobro (rabljeno), One-sided edge banding machine (LEFT) Edge thickness in rolls (min/max) mm 0.3 - 3 Edge thickness in strips/lippings (min/max) mm 3 - 12 Panel thickness (min/max) mm 8 - 60 Control ICOS open TS Feed speed m/min (adjustable) 4 - 20 Upper pressure with V-belt drive Sprayer unit (for liquid anti-adhesive) Jointing milling unit 08.376 (2 x 3 kW) Gluing unit (Hot Melt glue) 283.1513 Edge pressure zone Edge magazine for rolls (compartment no.) 1 End trimming unit 08.415 (2 x 0.66 kW) Cjdpfx Afsflc Uheqeaa Milling unit 08.055 (2 x 1 kW) 0°-30° Multi-functional unit (radius milling and contour milling unit) 08.342 (2 x 0.66 kW) Profile scraper unit 08.519 Flat scraper unit 08.50 Buffing unit 08.612 (2 x 0.25 kW)

Stanje: dober (rabljeno), IMA LED assembly aid Used, in fully functional condition. Approx. 60 LEDs 15-pin serial connector on both sides Cjdpfjbxx Iuex Afqeaa Dimensions: 18 x 56.7 x 312 mm, including 10 mm for the connectors Direct purchase available in our online shop on our website.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, Tabela Cjdpfx Aswpmdzofqjaa Zunanja dolžina 500 mm Zunanja širina 500 mm Dodatna oprema Enota za profilno rezkanje: 2 motorja, vsak po 4,0 kW, 8800 vrt/min Grelec: Predgreje robove obdelovanca do 60 mm Lepljenje: Obdeluje robove do 3 mm Enota za končno obrezovanje: 2 motorja, 660 kW Dodatne enote: Rezkanje, večprofilno rezkanje, konturno rezkanje, večprofilna strgala in strgalne enote; polirna enota Samodejni podajalnik topega lepila Quickmelt Sistem vračanja plošč z motoriziranimi valjčnimi transporterji, prečnim transporterjem, transportnim trakom, kotnim prenosom, zračnimi blazinami in varnostno ograjo Ta robna lepilka IMA Novimat Concept / I / G80 / 440 / R3 je bila izdelana leta 2012. Odlikuje jo robusten avtomatski sistem za lepljenje robov in kasnejšo obdelavo, vključno s sistemom za vračanje obdelovancev za povečano produktivnost. Stroj je sposoben obdelovati robne trakove debeline od 0,3 mm do 3 mm ter obdelovance debeline do 60 mm. Opremljen je s pnevmatskim sistemom za hitro zaklepanje in elektronskim nadzorom temperature za natančen nanos lepila. Izkoristite priložnost za nakup robne lepilke IMA Novimat Concept / I / G80 / 440 / R3. Za več informacij nas kontaktirajte. Vrste uporabe Lepljenje robov

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, Single-sided edge banding machine for narrow edges IMA NOVIMAT / CONTOUR / I / G80 / 790 / L20 with MFA servo unit for corner copying Year of manufacture: 2009 Technical condition: very good - Stable machine frame, onto which individual machining units are mounted. - Feed drive with electronically adjustable feed speed range from 6–30 m/min (machining unit operating speeds are not synchronized with the full range of feed adjustment). - Feed chain guided in low-friction guides with plastic pads and 80 mm wide rubber covering. - Automatic feed chain lubrication controlled by the machine program. - Upper pressure beam made from a double V-belt, 70 mm wide, guided on ball bearing-supported rollers; pressure beam is electronically adjustable. - Safety guards corresponding to CE certification. - Soundproofing and protective enclosures. - Edging unit with drive installed in a fully enclosed oil bath with glue pot (1 main powered pressure roller + 5 auxiliary rollers); pneumatic Quick-Lock glue pot fast-change system. - Touch-screen display. - End trimming unit for cutting off edge overhang at front and rear corners, with features including: pneumatic saw tilting 0–25°, straight and chamfer cutting, automatic saw positioning for corner chamfering for two different edge thicknesses (e.g. 0.4 and 1.2 mm) and adjustment of edge overhang cutting for corner copying. - All machining units equipped with chip extraction. - Novimat Contour series edge banders ensure very high processing quality due to the powerful corner copying unit and small gap between workpieces (~300 mm). Key technical data: - Edge material from roll thickness: from 0.3 to 3 mm - Paper, PVC and ABS edges: 0.3–3.0 mm - Veneer: 0.5–3.0 mm - Solid wood strips: 0.8–20 mm - Edge height: 14–65 mm - Maximum top edge overhang: • for edge thickness up to 8 mm – 5 mm • above 8 mm – 2 mm Workpiece dimensions: - Minimum workpiece length in feed direction: 150 mm - Minimum workpiece width (for up to 25 mm thick elements): 65 mm - Minimum workpiece thickness: 8 mm (without flat scraper) or 12 mm (with flat scraper) - Maximum workpiece thickness: • without corner copying: max 60 mm • with corner copying: max 40 mm - Smallest element: 150 × 150 mm or 65 × 300 mm (note: * 65 mm width at maximum workpiece thickness of 25 mm) Machine technical parameters: - Workpiece feed speed electronically adjustable: 6–30 m/min (note: feed speed may be limited by specific units on the machine) - Workpiece overhang beyond feed chain: • 38 mm (with edge thickness 0.3–8 mm) • 30 mm (with edge thickness 8.1–20 mm) Csdpfxjw R S Slj Afqeaa Electrical supply: - Voltage: 400/230 V, +5/–10 % with neutral - Frequency: 50 Hz - Control voltage: 230 V AC / 24 V - Compressed air: 8 bar - Extraction air speed: 28 m/s

Stanje: kot nova (razstavni stroj), SINGLE-SIDED EDGE BANDER (LEFT) Edge thickness on rolls (min/max) mm 0.3 / 3 – in lippings/strips mm max 1 Panel thickness (min/max) mm 8 / 60 (Laser – max 44) Cajdpogbug Nofx Afqja Control ICOS Open Feed speed m/min (adjustable) 16 – 30 Pressure belt driven by V-belt Spray unit (for liquid non-stick) Adjustable fence, CNC controlled Panel feeding system 700.101 (mm 500 x 500) Jointing milling unit with CNC-controlled 08.379 (Kw 4.0 x 2) edge pressure zone (CNC-controlled) Gluing unit (P.U.R. adhesive + premelter) 04.0836 + 283.1518 (edge feed servo-motor), adjustable via CNC Gluing unit (premelter with laser) Laser system IMALUX Spray unit (for separating agent) Pressure zone + edge magazine for rolls (compartments No.) 6 Linear end trimming unit 08.428 LKA V30/2 (Kw 0.2 x 2) speed up to 30 m/min (0°–25°) Multi-profile milling unit (CNC controlled) 08.0587 (Kw 1.0 x 2) 4 profiles Contour milling unit (for fine milling) CNC controlled KFA 20 (Kw 0.5 x 1) max 25 m/min Profile scraper unit DUO (4 profiles) Flat scraper unit 08.521 Spray unit (for polishing liquid) Buffing unit 08.617-4 (Kw 0.18 x 4) Universal milling unit for grooving/rebating and profiling 2x08.190 (Kw 4.5 x 2) 90°/180°/270° (CNC)

Stanje: zelo dobro (rabljeno), Single-sided edge banding machine (LEFT) Edge thickness (tape, min/max) mm: 0.3 - 3 Edge thickness (solid strips min/max) mm: 3 - 12 Casdpfx Afed Nuu Heqea Panel thickness (min/max) mm: 8 - 60 Control system: ICOS open TS Feed speed m/min (adjustable): 4 - 20 Top pressure: Driven by V-belt Sprayer unit (for liquid non-stick agent) Jointing milling unit 08.376 (2 x 3 kW) Gluing unit (hot melt adhesive) 283.1513 Pressure zone for edging Edge magazine for tape (compartment no.): 1 End trimming unit 08.415 (2 x 0.66 kW) Milling unit 08.055 (2 x 1 kW) 0°-30° Multi-function unit (radius and profile milling) 08.342 (2 x 0.66 kW) servo-controlled Profile scraping unit 08.519 Flat scraping unit 08.50 Buffing unit 08.612 (2 x 0.25 kW)

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED LOADING STATION Vacuum system (with pump) No. 2 vertical support columns for the upper support beam No. 1 horizontal upper support beam (on which the carriage slides) No. 1 motorized carriage with horizontal metal arms No. 2 external roller conveyors for discharge of the panel stack from the unloader No. 1 external motorized roller conveyor at the stacking section Separate electrical control panel Perimeter safety fencing Performance (cycles/minute): approx. 16 Caedpfxowbp Nwj Afqsa Min/Max panel thickness (mm): approx. 10 / 50 Min. panel dimensions (mm): approx. 250 x 320 Max. panel dimensions (mm): approx. 1300 x 3000 Total connected load: 80 kW

Stanje: zelo dobro (rabljeno), ONE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm: 0.3 / 3 Edge thickness in strips (min/max) mm: 0.8 / 20 Panel thickness (min/max) mm: 8 / 60 Control: ICOS Open Compact Feed speed m/min (adjustable): 6 - 30 Top pressure: toothed belt driven Adjustable fence: CNC controlled Jointing unit with CNC-controlled 08.376 (kW 4.5 x 2) Lamps for workpiece edge heating Edging station (Hot Melt + pre-melter) 283.1513 + 283.201 Edge pressure zone Edge magazine for rolls (compartment No.): 1 End trimming unit 08.42 (kW 0.66 x 2), max 30 m/min, 0°-25° Milling unit 08.055 (kW 1.85 x 2) 0°-30° Spray unit (for sliding liquid) Contour milling unit (for fine trimming) CNC controlled 08.348 (kW 0.66 x 2) 4 profiles Profile scraper unit 08.516 (4 profiles) Flat scraper unit 08.50 Spray unit (for polishing liquid) Buffing unit 08.612-2 (kW 0.25 x 2) Universal milling unit for grooving/rebating and profiling 08.183 (kW 3 x 1) Cajdpfx Afjidqphjqsa

Stanje: zelo dobro (rabljeno), ONE-SIDED EDGE BANDING MACHINE (LEFT) Roll material (edge) thickness (min/max) mm: 0.3 / 3 Caedor Ttflopfx Afqsa Veneer edges possible in a limited way up to max. 1.0 mm Panel thickness (min/max): 8 mm / 40 mm (with MFA) / 60 mm (without MFA) Control/software: ICOS Open Feed speed (adjustable) m/min: 6 - 30 Top pressure system with motorized timing belt Spraying device (for liquid anti-stick) Adjustable fence Jointing cutter unit - 08.378 (2 x 4.5 kW) Gluing unit (Hot Melt glue) 04.1570 Pressure zone Edge magazine for rolls (compartment no.): 2 End trimming unit 08.42/30/B (2 x 0.66 kW) 0°-25° (max. 30 m/min) Milling unit 08.055 (2 x 1 kW) 0°-30° Multifunctional unit (radius milling and contour trimming unit) 08.342 CNC controlled (2 x 0.66 kW) servo Profile scraper unit 08.519 Flat scraper unit 08.50 Buffing unit 08.617 (2 x 0.25 kW) Universal milling unit for grooving/rebating and profiling 08.190 (1 x 4.5 kW)

Stanje: zelo dobro (rabljeno), FLEXIBLE BATCH-SIZE-ONE PRODUCTION AND SINGLE-SIDED EDGEBANDING & FORMATTING LINE Comprising the following machines: M.01) LOADING TABLE AND AUTOMATIC WORKPIECE RETURN SYSTEM "SIRIO" BATCH SIZE ONE M.02) SINGLE-SIDED (right) FORMAT AND EDGE BANDING MACHINE "IMA" Novimat I/R75/690/R3 Panel thickness (min/max) mm 8 / 60 – Working width (min/max) mm 200 / 1300 Coil material (edges) thickness (min/max) mm 0.3 / 3 Control/software: ICOS Open (Batch Size One) Feed speed (adjustable) m/min 6 – 30 Fully automatic panel infeed system in format processing A1 / 15 No. 2 jointing milling units with CNC control 08.378 (4 motors x 4.5 kW) Gluing unit (Hot Melt adhesive + pre-melter) VTG + 283.205 Edgeband magazine for coil material (24 positions) End trimming unit 08.42 / 30 / B / LS1 (2 x 0.2 kW) 0°-25° Premilling unit 08.055.0.1680 (1 x 0.85 kW) Multi-profile milling unit (CNC controlled) 08.0587 HS/LS1 (2 x 1 kW) Contour milling unit (for fine milling) CNC controlled KFA x20 (1 x 0.5 kW) 20 m/min Multi-profile scraper unit (CNC controlled) 08.516 HS/LS1 Csdpfxekt Uuas Afqsaa Flat scraper unit 08.521 Buffing unit 08.617-2 (2 x 0.18 kW) No. 3 universal milling units for grooving, rebating, and profiling 08.190 (3 x 4.5 kW) CNC controlled – 90°/180°/270° M.03) LOADING AND STACKING SYSTEM "SIRIO"

Stanje: zelo dobro (rabljeno), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness for rolls (min/max) mm: 0.3 / 3 – for solid strips mm: max 1 Panel thickness (min/max) mm: 14 / 60 (LASER – Max 50) Control system: ICOS Open Feed speed m/min (adjustable): 6 – 30 Top pressure: V-belt driven Sprayer unit (for liquid anti-adhesive) Adjustable fence, CNC controlled Panel infeed system Jointing cutter unit with CNC control 08.378 (2 x 4.5 kW) Edge pressure zone (CNC controlled) Gluing unit (PUR glue + premelter) 283.201 + 283.203 Gluing unit (premelter with laser) Laser System LASERLINE Spraying unit (for separating fluid) Pressure section + edge magazine for rolls (compartment No.) 36 + 12 End trim unit 08.428 (0.2 kW x 2) Speed up to 30 m/min (0°–25°) Pre-milling unit 08.0555 HS/LS1 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 1) 4 profiles Contour trimming unit (for fine trimming), CNC controlled KFA 30 (0.5 kW x 1) max. 30 m/min Multi-profile scraping unit (CNC controlled) 08.0516 (4 profiles) Flat scraper unit 08.521 Sprayer unit (for polishing fluid) Cjdpfxoi Hn Srj Afqjaa Buffing unit 08.614 (0.25 kW x 4) Universal milling unit for grooving/rabbetting and profiling 2x08.190 (4.5 kW x 2) 90°/180°/270° (CNC)

Stanje: zelo dobro (rabljeno), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max): 0.3 - 3 mm Panel thickness (min/max): 8 - 60 mm Control: ICOS open compact Feed speed (adjustable): 6 - 30 m/min Pressure belt, driven – with spraying unit (for liquid anti-adhesive) Panel feeding system: A1 / 15 Adjustable fence – CNC controlled, panel infeed system Barcode reader Joint trimming unit with CNC control 08.379 (2 x 4.0 kW) Caodpoltmnlsfx Afqja Radiator for workpiece edge heating Gluing unit (P.U.R. glue + premelter) VTG + 283.203 Edge pressure zone. Edge height setting – CNC controlled. Edge magazine for rolls (number of compartments): 12 End trimming unit 08.42 / 30 / B (0.66 kW x 2) (PNEU 0°-25°) 30 m/min Pre-milling unit 08.0555 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 2) 4 PROFILES HSK 25 Spray unit (for sliding agent) Contour milling unit (for fine milling) CNC controlled KFA x30 (0.5 kW x 1) 30 m/min Multi-profile scraper unit (CNC controlled) 08.516 (4 PROFILES) Flat scraper unit 08.521 Spray unit (for polishing fluid) Buffing unit 08.617 (0.18 kW x 4). Free slot Universal milling unit for grooving, rebating, and profiling 08.190 (4.5 kW x 1)

Stanje: zelo dobro (rabljeno), ONE-SIDED EDGE BANDING MACHINE (LEFT) Casdpod Nt N Hsfx Afqsa Edge Thickness in Rolls (min/max) mm: 0.3 / 3 Edge Thickness in Strips (min/max) mm: 3 / 12 Panel Thickness (min/max) mm: 8 / 60 Control: ICOS open TS Feed Speed m/min (adjustable): 4 - 20 Top Pressure: V-belt driven Spraying Unit (for liquid anti-adhesive) Adjustable Fence, CNC controlled Jointing Milling Unit 08.379 (2 x 4.0 kW) Gluing Unit (Hot Melt Adhesive & PUR Glue) 283.1513 Pressure Zone for Edges (CNC-controlled) Edge Magazine for Rolls (compartment no.): 1 End Trimming Unit 08.415 (2 x 0.66 kW) Pre-Milling Unit 08.055 (2 x 1.0 kW) Form Milling Unit (Copying) SKF-L (CNC) 2 x 0.18 kW + 2 x 0.4 kW Profile Scraper Unit 08.519 Flat Scraper Unit 08.521 Buffing Unit 08.617-2 (2 x 0.18 kW) Universal Milling Unit for Grooving/Rabbetting and Profiling 08.190 (1 x 4.5 kW) 90°-180°-270° OPTIONAL: Infeed Table 65.152 (mm 500 x 500) The Return Conveyor "GELDMEIER" Mod. ? (Ref. No. Z02009)