Bima nakup rabljenega (103)

Stanje: rabljeno, številka stroja/vozila: 006054, Delovno območje os X: 5300 mm Delovno območje os Y: 1300 mm Delovna površina: z vakuumskimi konzolami Moč glavnega vretena: 9 kW Število upravljanih osi: 5 osi Iolhcdwowcx T Uj Eohu Število vrtalnih vretenc: 32 Število mest za orodja: 8

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, številka stroja/vozila: 24406, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 900 h, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, ⚙️ IMA BIMA CUT 145/330 – Technical Specifications (Main) 🔹 Working Area (Axis Travels) • X-axis: approx. 3300 mm • Y-axis: approx. 1450 mm • Number of axes: 3 (typically X, Y, Z) 🔹 Spindle • Spindle power: approx. 18 kW Ioloykn Dwehcdw Eehu • Applications: milling, drilling, nesting of panels 🔹 Tool Magazine • Automatic tool changer (ATC): up to 18 positions 🔹 Material Clamping System • Vacuum table with beams and suction cups 🔹 Saw Aggregate • Saw projection: approx. 145 mm • Cutting length: approx. 330 mm — 🛠️ Functions and Equipment (Typical) • 5-sided drilling (top + X+/X−/Y+/Y− sides) • Saw unit for cutting and grooving • Optional horizontal milling unit (HBO) • Automatic loading and unloading table (depending on configuration) • Nesting system (panel optimization with simultaneous machining) • Automatic lubrication • Waste and chip conveyance (belt conveyor) — 📌 General Information • Manufacturer: IMA Schelling (Germany) • Year of manufacture found in listings: approx. 2010–2016 (often 2014) • Applications: Furniture, MDF boards, HPL, solid wood, nesting

Stanje: rabljeno, številka stroja/vozila: 007842, Delovno območje os X: 5000 mm Delovno območje os Y: 1200 mm Delovna površina: z vakuumskimi konzolnimi nosilci Iholhcdweyhbius Eju Moč glavnega vretena: 18 kW Število krmiljenih osi: 4 osi Maksimalna višina roba: 64 mm Število vrtalnih vreten: 14 Število mest za orodja: 18

Stanje: rabljeno, Leto izdelave: 1994, Lokacija skladišča: Nattheim Iholswmm Nrehcdw Eeu

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, potovalna razdalja osi X: 6.000 mm, pomik osi Y: 1.400 mm, pomik po osi Z: 100 mm, število osi: 3, največja hitrost vretena: 24.000 obr/min, Ta IMA BIMA 410 V je bila izdelana leta 2005. Gre za CNC obdelovalni center za les z integriranim enoto za obrobljanje robov. Značilnosti vključujejo delovno območje osi X do 6000 mm, osi Y 1400 mm in osi Z do 100 mm. Glavna moč vretena je 7,5-11 kW, z razponom vrtljajev od 1.500 do 24.000 min⁻¹. Menjalnik orodij ima 18 pozicij. Možnosti obdelave robov pokrivajo debeline od 0,4 do 3 mm. Za več informacij nas kontaktirajte. Prednosti stroja Tehnične prednosti stroja • Avtomatski rotacijski menjalnik, 18 pozicij • Vertikalna vrtalna glava z do 21 vreteni (11+10) Ihslhcdeyap U Aow Eju Dodatne informacije Obrobljalni stroj VT 100 Za štiristransko in čelno obdelavo robov Debelina robu: 0,4-3 mm Višina robu: 14-64 mm

Stanje: rabljeno, številka stroja/vozila: 007841, Delovno območje os X: 4200 mm Delovno območje os Y: 1200 mm Delovna površina: z vakuumskimi konzolnimi nosilci Moč glavnega vretena: 18 kW Iholhcjyg Ef Dedw Eou Število krmiljenih osi: 4 osi Maksimalna višina roba: 64 mm Število mest za orodje: 18

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, potovalna razdalja osi X: 4.200 mm, pomik osi Y: 1.200 mm, skupna masa: 7.200 kg, največja hitrost vretena: 15.000 obr/min, This IMA BIMA CUT 120/240 was manufactured in 2003. It is a CNC woodworking center with a working area of X: 4200 mm, Y: 1200 mm, and a maximum clamping height of 100 mm. The machine features a main spindle with HSK F63 tool holder and a drive power of 7.5 kW. Additionally, it is equipped with a tool changer magazine holding 18 tools and offers a wide range of drilling and milling capabilities. Contact us for more information about this machine. Machine Advantages Ihelhox U T Hmecdw Eju Quality Features • Drive power: 7.5 kW in S1 mode • Spindle lubrication: permanent grease lubrication from factory • Spindle cooling: water cooling • The automatic tool/adapter changer magazine features a disk changer design with 18 coded magazine slots and moves with the support along the X axis. • The adapter units include a sawing unit (max. 15,000 rpm, 200 mm blade), a horizontal drilling and milling head with 4 spindles (max. 15,000 rpm), a drilling unit for lock cases or sash holes (max. 12,000 rpm), a vertical drilling unit S21 (6,000–9,000 rpm, max. 35 mm drilling diameter), and a horizontal drilling/sawing unit (4,500–6,000 rpm, max. 125 mm groove saw, swiveling range 0 or 90 degrees). • Graphical user interface: imawop for PC • Bima Cut Editor Office • Bima Cut Editor Import Interface • Controller for label printer • Label printer Technical Features • Max. clamping height from top of suction cup Z1: 100 mm • Workpiece thickness Z2: 14 – 38 mm • Working table height: approx. 1000 mm • Alternate field machining area without pendulum operation X: 2 x 2000 mm • Central clearance X without pendulum operation: 200 mm • With pendulum operation X: 2 x 1500 mm • Central clearance X with pendulum operation: 1200 mm • Automatic tool feed • Feed force: 11,000 N • Rotation direction: programmable, clockwise/counterclockwise Additional Information Machine still under power

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, 4-Axis Machining Center IMA BIMA 300 Year of Manufacture: 2009 Technical Condition: Very Good Technical Data: Iholhew R S Dnecdw Eou - Working table: 4,300 × 1,250 mm - 8 consoles (24 suction cups) - Main spindle: 7.5 kW (max. 11 kW), 1,500–18,000 rpm - Tool magazine: 18 positions - IMA 14 drilling unit - Tool set - 2 × vacuum pump 90 m³/h - Safety mats – alternating mode operation - IMAWOP software on machine + 1 office license - Emergency computer power supply - Control cabinet air conditioner - Main spindle unit for horizontal drilling - Max. feed rates: X 60 m/min, Y 60 m/min, Z 30 m/min - Dust extraction: as per connection diagram; air velocity v = 28 m/s; central port Ø 250 mm - Weight: approx. 5,500 kg - Compressed air: ¾" connection, 6 bar; dry operation (dryer recommended if the system does not comply) - Electrical installation: main switch in separate control cabinet; operated from separate control panel; complete electrical cabinet with monitoring; all safety features comply with CE; typical cabinet dimensions (H/W/D) approx. 2000×1200×800 mm; power supply 400/230 V, 50 Hz - Environmental conditions: permissible ambient temp. +15…+35 °C (without cabinet air conditioner) - CNC control - Controller: ICOS OPEN 321 (PL language version) - Interpolation: linear simultaneous for 3 axes; circular 2½D for two axes in any of the three planes - Selected IMAWOP functions: operation selection (drilling, milling, grooving); graphics update after corrections; drilling time optimization; graphical cup positioning; conditional/formula programming; technology and tool databases; alphanumeric names/descriptions (up to 28 characters); subprograms; manual entry of machining sequence; disturbance messages; acceleration/braking adjustment (accuracy to 0.001 mm); automatic referencing; corrections from portable panel Additionally: IMAWOP machining program

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 1.000 mm, število osi: 3, proizvajalec krmilnikov: SIEMENS, skupna masa: 5.000 kg, moč vretenovega motorja: 12.000 W, največja hitrost vretena: 9.000 obr/min, Additional Equipment • 1 vertical drilling unit in Y-direction • 1 vertical drilling unit in X-direction • 1 main spindle with programmable rotation direction • 1 centrally integrated CNC axis, rotatable 360 degrees • 1 saw adapter unit, fixed at 90 degrees • Saw blade diameter: 200 mm • 1 adapter unit for horizontal drilling and milling head (crosshead) • 1 adapter unit for horizontal milling cutter (face milling) • 2x adapter units for hinge drilling • Includes 1 new Siemens vacuum pump + extensive accessories Machine Advantages Technical Machine Advantages • Max. clamping height from top edge of suction plate: z1 100 mm • Working height: 950 mm • Traverse speed: 20 m/min • Acceleration: 5 m/s² • Alternating field area without pendulum operation: x 2 x 1400 mm • Clear space in the center: x 200 mm • With pendulum operation: x 2 x 900 mm • Clear space in the center: x 1200 mm • Automatic tool feed • Feed force: 11,000 N Additional Information Media Extraction standard: Connections for 200 mm, 120 mm, and 100 mm diameters Extraction speed: approx. 28 m/sec Extraction volume: approx. 3,200 m³ per hour 1 vacuum pump 40 m³/h Compressed air supply: Central connection for 1/2" with maintenance unit. Constant air pressure 6 bar Electrical Equipment Ielhcdjx N Ulmsw Eohu Electrical installation according to EN Control cabinet dimensions (HxWxD): 2000 mm / 1200 mm / 600 mm Safety and protection measures in accordance with CE regulations

Stanje: zelo dobro (rabljeno), 5-axis (X-Y-Z-C-5) CNC machining center for milling, drilling, cutting, and edge banding. Gantry design – safety tread mats. Ihelhcdohu U Nxsw Eeu PC control type: ICOS OPEN CNC – IMAWOP software. Worktable: console table (No. 8 console tables, each 1400 mm). Console tables with LED / diode light strips. Automatic tool change system (magazine – 18 tool positions). Working area (X-Y-Z): 4000 x 2100 x 300 mm. Working area for edge banding (X-Y-Z): 4000 x 1800 x 60 mm. No. of working zones: 2. Vacuum pump / capacity (m³/h): 140. Chip conveyor. Separate electrical and control cabinets. Total connected load (kW): 32. Working units (top): - 21 independent vertical drilling spindles (4 x 1.2 kW) - 1 vertical main spindle (milling unit) HSK 63 ROBOT (16 kW) - Edge banding unit (hot melt glue) VT 100. Edge material (rolls): thickness (min/max): 0.4 / 3 mm. Edge magazine for rolls (2 compartments). OPTIONS: - Saw unit, max diameter 200 mm. - Combination unit (flush milling & profile scraper). - Drilling head (with 4 horizontal drilling spindles).

Stanje: zelo dobro (rabljeno), CNC MACHINING CENTER (POINT-TO-POINT) – 5 Axes (ROBOT head) Gantry design construction Control: ICOS CNC – Software: IMAWOP / (OPTION IMAwinCAD) Safety cabin for machining head Clamping table with 8 consoles LED positioning system on the X-axis for console positioning and on the Y-axis for vacuum clamp positioning Automatic tool change system 2 disk-type tool changers – Magazine/tool stations (8 each) + TC8 (18 stations) Ijlhcdwefin Sao Eehu Maximum working area (X-Y-Z): 4300 mm x 1300 mm (1410 mm) x 350 mm 2 working zones – Vacuum pump (capacity in m³/h): 140 Separate electrical and control cabinet. Total power connected (kW): 23 WORKING UNITS (TOP): 21 independent vertical drilling spindles 4 independent horizontal drilling spindles (drilling head motor power: 1.2 kW x 4) 1 grooving unit, 125 mm diameter, swivels 90° in X-Y direction 1 vertical main spindle (milling unit), robot head (HSK F63) Vertical main spindle power (kW): 9 Independent Z-axis travel: 650 mm A-axis arranged/mounted at a 90° angle to the C-axis C-axis rotation range: 420°, A-axis rotation range: 140°

Stanje: zelo dobro (rabljeno), 4-axis (X-Y-Z-C) CNC machining centre for milling, drilling, cutting, and edgebanding Control: IMAtronic 231 (Software: IMAWOP) Maximum working area (X - Y - Z) mm: 5000 x 1630 x 100 Maximum working area for edgebanding (X - Y - Z) mm: 3900 x 1450 x 60 No. 8 clamping tables with consoles (number of consoles) - 1200 mm LED setup assistance for vacuum cup (sleeve) positioning (Y-axis) 1 vacuum pump (capacity 140 m³/h) Safety enclosure for working head, safety foot mats Chip conveyor No. 2 vertical main spindles (milling units), HSK F63 (1 x 11 kW + 1 x 7.5 kW) Automatic tool change system (disc changer) with 18 tool positions No. 21 independent vertical drilling spindles (4 x 1.2 kW) No. 6 independent horizontal drilling spindles (1 x 3 kW) Edgebanding unit – gluing module (hot melt glue) VT 50 Edge magazine for rolls (6 compartments) OPTIONAL: 1 adapter unit for saw, fixed 90 degrees, max diameter 200 mm Ielhcdwofbmqte Eehu 1 adapter unit for flush milling and profile pull blade 1 adapter unit horizontal drilling & milling head (cross head) with 4 horizontal spindles

Stanje: zelo dobro (rabljeno), 4-axis CNC-controlled MACHINING CENTER Gantry-type construction, ICOS-Open control system. Software: IMAWOP / IMATRONIC - BIMA Fast Cut Clamping table with consoles. No. 6 consoles (1400 mm) Automatic positioning of the consoles (X-axis) Automatic positioning of the vacuum clamps (Y-axis) Automatic tool change system Rotary changer – magazine with 18 tool slots Maximum working area (X – Y – Z): 4250 x 1600 x 60 mm Minimum workpiece dimensions (X – Y – Z): 295 x 115 x 14 mm Maximum workpiece dimensions (X – Y – Z): 4250 x 2200 x 60 mm Chip conveyor Separate electrical and control cabinet. Total connected load: 28 kW WORKING UNITS (TOP): Vertical main spindle (milling unit) HSK F63 – power: 14.5 kW (S6) / 7.5 kW (S1) No. 3 grippers for clamping and moving the panels onto the machine’s vacuum cups No. 5 air tables for staging panels before processing Vacuum system with program-controlled suction for lifting panels onto the conveyor belt Iolhcjvxhnusdw Ejhu Panel discharge system with motorized conveyors

Stanje: zelo dobro (rabljeno), 4-axis (X-Y-Z-C) CNC machining center for milling, drilling, cutting, and edge banding Gantry design, equipped with ICOS-Open control system. Software: IMAWOP + IMAwinCAD. Set-up table with consoles. Number of consoles: 6 (1450 mm) DYNAPOINT Automatic positioning of consoles (X-axis) Automatic positioning of vacuum clamps (Y-axis) Automatic tool changer – 18 tool positions Max. working area (X-Y-Z): 6300 x 1450 x 100 mm Min. workpiece size (X-Y-Z): 320 x 115 x 14 mm Max. workpiece size (X-Y-Z): 5600 x 2100 x 38 mm Chip conveyor Supplied with separate electrical control cabinet and control panel. Total connected load: 34 kW WORKING UNITS (TOP): No. 1 vertical main spindle (milling unit), HSK F63, drive power: 18 kW (S6) Fixed 90° saw, diameter 200 mm Edge banding unit (installed on the machine) VT 100 2-fold coil magazine Combi-unit (flush-trimming/profile scraper) Iolhstixpuocdw Eohu Feed system with brush table No. 6 clamps for securing and moving the panel on the machine vacuum cups Workpiece outfeed with motorized rollers and angle transfer system

Stanje: zelo dobro (rabljeno), 4-axis (X-Y-Z-C) CNC machining center for milling, drilling, cutting, and edge banding Control: ICOS CNC (IMAWOP software) Maximum working area (X - Y - Z) mm: 3100 x 2000 x 100 Maximum working area (X - Y - Z) for edge banding (mm): 3100 x 1925 x 60 No. 6 clamping tables with consoles (number of consoles) - mm 1400 LED set-up aid for vacuum cup positioning (Y-axis) No. 1 vacuum pump (capacity 250 m³/h) Operator protection cabin for working head, safety tread mats No. 1 vertical main spindle (milling unit) HSK F63 (18 kW) Automatic tool changer (carousel type) with 18 tool stations No. 14 independent vertical drilling spindles (2 x 1.2 kW) Cross aggregate with 4 horizontal drilling spindles + grooving saw (max. diameter 125 mm) Edgebanding unit – gluing station (hot melt glue) VT 100 No. 2 edge magazines for rolls OPTIONS: No. 1 adapter unit “FLEX 5” model VARIO NC No. 1 adapter unit for flush or chamfer milling No. 1 adapter unit for flush milling and profile scraping blade No. 1 barcode reader Ioleq Nmutehcdw Eehu

Stanje: zelo dobro (rabljeno), 5-axis (X-Y-Z-C+ 5°) CNC MACHINING CENTER (POINT-TO-POINT) CNC machining center for milling, drilling, cutting, and edge banding Control: ICOS CNC (IMAWOP software) Maximum working area (X - Y - Z) mm: 4000 x 1600 (2000) x 100 (Z-axis travel 650 mm) Maximum working area (X - Y - Z) for edge banding (mm): 4000 x 1600 x 100 No. 8 clamping tables with consoles (number of consoles) – 1400 mm LED setup assistance for vacuum cup (socket) positioning (Y-axis) No. 2 vacuum pumps (capacity 140 m3/h) Safety enclosure for machining head, safety tread mats Chip conveyor No. 1 vertical main spindle (milling unit) ROBOT HEAD HSK F63 (16 kW) Automatic tool changer (rotary magazine) with 18 tool positions No. 21 independent vertical drilling spindles (4 x 1.2 kW) No. 8 independent horizontal drilling spindles (4 in X + 4 in Y) Grooving saw unit (swivels 90° in X-Y direction), diameter 200 mm Edge banding unit (PUR glue + pre-melter 283.203) VT 100/100 WITH 45° SWIVEL EDGE BANDING UNIT No. 2 edge magazine for rolls Ihjlhcew A Ruqodw Esu OPTIONS: No. 1 adapter unit for flush or chamfer milling No. 1 adapter unit for flush milling and profile scraper

Leto izdelave: 2014, Stanje: pripravljen za uporabo (rabljen), Glavni pogon Število osi: 3 Iholhex D Nitecdw Eeu Ta 3-osni CNC obdelovalni center za les IMA BIMA CUT 145/330 je bil izdelan leta 2014. Ponaša se z delovnim območjem 3300 mm na osi X in 1450 mm na osi Y ter močjo vretena 18 kW. Stroj je opremljen z orodnim magazinom za do 18 pozicij in vakuumskim vpenjalnim sistemom za varno pritrditev obdelovanca. Če iščete visoko kakovostne možnosti rezkanja, razmislite o stroju IMA BIMA CUT 145/330, ki ga imamo v prodaji. Kontaktirajte nas za več informacij. Vrste uporabe CNC obdelava lesa

Leto izdelave: 2006, Stanje: pripravljen za uporabo (rabljen), Splošni podatki Teža stroja: 6200 kg Glavni pogon Območje hitrosti vretena: 8000–24000 Število osi: 3 Pomik Pomik po X-osi: 3000 mm Pomik po Y-osi: 1200 mm Pomik po Z-osi: 100 mm Ta 3-osni IMA BIMA 210 120/300 je bil izdelan leta 2006. Odlikuje ga velik hodi osi (X = 3000 mm, Y = 1200 mm, Z = 100 mm), kar omogoča obdelavo obdelovancev dolžine do 2800 mm in širine do 1200 mm. Glavno vreteno ima moč 7,5 kW z območjem vrtljajev od 8.000 do 24.000 min⁻¹. Teža stroja znaša približno 6200 kg in vključuje CNC krmilje IMA IMATRONIC. Za dodatne informacije o stroju nas kontaktirajte. Ihslhcsx D Rt Hedw Esu Uporaba CNC obdelava lesa

Stanje: rabljeno, Imatronic Numerical Control with ImaWop 8.0 software (software updated in 2020). Working area on the X-axis: 7000 mm. Working area on the Y-axis: 1400 mm. Full table with support plate for positioning suction cups. Suction cups can be manually positioned on the work surface using a laser indicator. No. 2 vertical electrospindles with C-axis and automatic tool changer. Automatic tool changer with 18 positions located at the rear of the machine. Drilling head with 21 spindles arranged as follows: * 11 vertical on the X-axis * 10 vertical on the Y-axis. Edge banding unit with glue pot and pre-melter for EVA glue (new glue pot as of 2023). Nordson pre-melter for PUR bonding on folding panels. No. 1 trimming unit (end trimmer). No. 1 milling unit. No. 1 cross-unit with 4 horizontal drilling lines. No. 1 blowing unit. Edge storage unit with 2 positions. Front carpet protection and safety system. Full safety enclosure (not original IMA). TECHNICAL DETAILS TO BE VERIFIED. Ihslhcdwsw El Nho Eou

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, 4-axis CNC machining center with console table and edge banding unit Manufacturer: IMA Model: BIMA 400 V Year of manufacture: 2009 Iolhcdoxrltksw Eehu - 8 manually adjustable supports along X-axis - 3 vacuum suction cups per console - Vacuum pump 100 m³/h -2* - Vacuum connection for templates - LED display for suction cup position indication - Working area X: 200 – 6150 mm - Working area Y: 0 – 1600 mm for milling/drilling, up to 1525 mm with edge banding - Working area Z: 12 – 125 mm (clearance 150 mm) - 14 vertical drilling spindles - Horizontal drilling and grooving saw unit, swiveling 90° - Milling spindle 11 kW / 7.5 kW up to 24,000 rpm - With C-axis, 360° interpolation, liquid circulation cooling - 18-position tool changer mounted on Y-support - VT 100 edge banding unit, 4-sided/complete, rotation range 740 degrees - With 2-position roller magazine, automatic granule feed Adapter units: – Fixed saw 90° – 5-axis saw/drill/milling unit, Vario NC – Horizontal milling head (corner notching) – Flush milling and profile scraper with flat scraper extension - ICOS open control with 17″ TFT - ImaWop 6.0 including MDC and production list software - Chip conveyor - Side safety fencing and front safety mats - Rear: wall installation or separate safety protection required

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 80.859 h, potovalna razdalja osi X: 6.000 mm, pomik osi Y: 1.630 mm, TEHNIČNI PODATKI Iheljx Af Ivohcdw Eeu X-pomik brez lepljenja: 6.000 mm X-pomik z lepljenjem: 5.000 mm Y-pomik: 1300 mm Y-pomik z glavno vreteno + premer orodja 20 mm: 1630 mm Y-pomik z lepljenjem: 1450 mm Pripravljalna miza: Dyna Poin BIMA 410 V Zasedenost: 4 mesta Enota za obrobljanje robov: prisotna Delovne ure: 80.859 h

Stanje: rabljeno, Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, Ηλεκτρονικά ελεγχόμενο κέντρο κατεργασίας CNC με: • Τυπικό τραπέζι • Χαλιά ασφαλείας • 1 αντλία κενού 100 m³/ώρα • IMATRONIC-NT • Πλευρικό πλέγμα ασφαλείας δεξιά • Με πόρτα και μπροστινό αριστερά • Φορητή κονσόλα για τη ρύθμιση πείρων και βιδών συγκράτησης Τεχνικά χαρακτηριστικά: • Περιοχή κατεργασίας με τυπικές μονάδες X/Y 6000/1200mm • Μέγιστο ύψος σφιγκτήρα από την άνω επιφάνεια της πλάκας κενού Z1: 100mm Iolhcdwowyvfcs Eehu • Μέγιστο πάχος πάνελ Z2: ανάλογα με τη χρήση • Ύψος τραπεζιού εργασίας: περ. 1000mm • Εναλλακτική περιοχή πεδίου χωρίς κυκλικό κύκλο X: 2 x 2650mm Ελεύθερος χώρος στο κέντρο X: 700mm • Με επεξεργασία σε κύκλο X: 2 x 2250mm Ελεύθερος χώρος στο κέντρο X: 1500mm • Κεντρική λίπανση • Τροφοδοσία ρεύματος: 3/N/PE, 400/230 V • Λογισμικό IMAwinCAD για μηχανές BIMA, συμπεριλαμβανομένης συγκόλλησης ακμών • IMAWOP • Κύρια άτρακτος HSK F63/διάμετρος κώνου 38mm/12kW/υδρόψυκτη • 1 μονάδα οπής πριονιού • 1 μονάδα πριονιού αυλακώματος • Συγκόλληση ακμής VT 61

Stanje: rabljeno, Leto izdelave: 2021, Edge thickness: from 0.4 to 3 mm Workpiece thickness: from 10 to 50 mm Total length, mm Feed speed: 9 m/min Weight: approx. 1,500 kg BI-MATIC Edge Banding Machine Type PRIMA 7.3 r.a. PLUS MAN Partnership Edition Single-operator use, very little running time, from business closure ----- Technical Manufacturer Description: Units / Aggregates: - Jointing unit incl. AIGNER diamond jointing cutterheads with DIA quick-change knife system (Konstantin) and controlled edge air nozzle behind the 2nd jointing cutterhead - Cross-cut saw unit with extraction system incl. pneumatically tiltable saw blades, adjustable and programmable from the operator panel - Radius milling unit - Corner rounding unit (copying milling unit) with insert tray function and 2-position turret. The entire unit can be pneumatically engaged or disengaged. - Radius scraper unit, engageable/disengageable, incl. extraction system with chip collection box for scraper chips - Flat scraper unit with quadruple-use scraper blades. The entire unit is engageable/disengageable. Removed glue residues are extracted. - Buffing unit with 2 angled fabric buffing discs Equipment: - High-gloss package: roller tracing for radius milling, radius scraper, and flat scraper units - Large viewing, noise, and safety enclosure for all units and the glue pot - Internal lighting - Operator panel with 12" touchscreen and intuitive user guidance - USB port for data backup and transfer - Network connection for online support - Controlled pneumatic cylinder for workpiece distance control - Teflon-coated glue pot with quick-change system and energy-saving standby mode - Glue roller with feed screw for processing long and high workpieces (especially for PUR adhesive) Ijlsyif Tdjhcdw Ejhu - Pressure zone with motor-driven first pressure roller - Heavy-duty roll shear for edges 54 x 3 mm - Infeed fence (jointing thickness adjustment) adjustable via handwheel with digital readout - Upper roller pressure beam with digital workpiece thickness display and handwheel adjustment - Pressure zone with digital display and handwheel adjustment - Manual 2-position turret for radius milling unit - Manual 2-position turret for corner rounding unit - Manual 2-position turret for radius scraper unit Technical Data: Edge thickness: 0.4–3 mm Min. panel width (without corner rounding unit): 80 mm Min. panel width (with corner rounding unit): 130 mm Min. panel length (without corner rounding unit): 100 mm Min. panel length (with corner rounding unit): 300 mm Min. panel thickness: 10 mm Max. panel thickness: 50 mm Feed speed: 9 m/min Extraction nozzles: 2 x 150 mm Electrical connection: 9 kW, 400 V Compressed air: 6 bar ----- Price for the above-mentioned machine: on request! ----- (Technical data as provided by the manufacturer—without guarantee!) All prices quoted are net, plus statutory VAT.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, Stroji za lepljenje robov iz leta 2005. Ta model 612 znamke Bi Matic je opremljen z lepilnim agregatom, rezkalnim agregatom za robove, sprednjim in zadnjim kap agregatom, rezkalnim agregatom s posnetjem, agregatom za odstranjevanje lepila ter ščetkami za končno poliranje. Poleg tega ima dvosmerno odsesavanje prahu in odsesne cevi. Izkoristite priložnost za nakup stroja za lepljenje robov Bi Matic 612. Za več informacij nas kontaktirajte. • Enostranski stroj za lepljenje robov • Lepilni agregat • Rezkalni agregat za robove • Sprednji in zadnji kap agregat • Rezkalni agregat s posnetjem • Agregat za odstranjevanje lepila Iholhcdjyhc Tnsw Eou • Ščetke za končno poliranje Dodatna oprema • Dvosmerno odsesavanje prahu • Odsesne cevi

Stanje: dober (rabljeno), Leto izdelave: 1998, Debelina robnega traku: od 0,4 do 5 mm Debelina obdelovanca: od 10 do 50 mm Skupna dolžina: 2730 mm Teža: 720 kg - Lepljenje robnega traku - Obojestransko kapanje - Poravnano rezkanje - Hitrogrelni rezervoar s časom segrevanja 5 do 6 minut - Orodje za odrezovanje materiala v roli - Digitalno upravljanje temperature Ihjlhcsx Tu Rdsdw Eju - Širina stroja: 825 mm