Meba nakup rabljenega (35)
Razvrsti rezultate
- Najnižja cena Najvišja cena
- Najnovejši oglasi Najstarejši oglasi
- Najkrajša razdalja Največja razdalja
- Najnovejše leto izdelave Najstarejše leto izdelave
- Zadnja posodobitev Najstarejša posodobitev
- Proizvajalci od A do Ž Proizvajalec od Z do A
- Relevantnost
- Najnižja cena
- Cena
- Najvišja cena
- Cena
- Najnovejši oglasi
- Datum vnosa
- Najstarejši oglasi
- Datum vnosa
- Najkrajša razdalja
- Razdalja
- Največja razdalja
- Razdalja
- Najnovejše leto izdelave
- Leto izdelave
- Najstarejše leto izdelave
- Leto izdelave
- Zadnja posodobitev
- Posodobitev
- Najstarejša posodobitev
- Posodobitev
- Proizvajalci od A do Ž
- Proizvajalec
- Proizvajalec od Z do A
- Proizvajalec
- Oznaka od A do Ž
- Oznaka
- Oznaka od Z do A
- Oznaka
- Model od A do Ž
- Model
- Model od Z do A
- Model
- Najnižja referenca
- referenca
- Najvišja referenca
- referenca
- Najkrajši obratovalni čas
- Obratovalni čas
- Najdaljši čas obratovanja
- Obratovalni čas
- relevantnost
- relevantnost
MEBA
Mali oglas
Günzburg
438 km
Tračna žaga
MEBA335 A
Pokliči
Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Dimenzije žagnega traku: 4400 x 34 x 1,1 mm
Obseg rezanja pri 90 stopinjah (okroglo): 335 mm
Obseg rezanja pri 90 stopinjah (ploščato): 500 x 335 mm
Ffodpsyrc Aqofx Abvow
Hitrost rezanja: 15–150 m/min
Teža stroja pribl.: 1.550 kg
Mali oglas
Poljska
653 km
MEBA MEBAeco 510
MEBAMEBAeco 510
Pokliči
Leto izdelave: 2019, stanje: pripravljen za uporabo (rabljen), skupna masa: 1.900 kg, skupna širina: 3.100 mm, skupna višina: 2.200 mm, hitrost rezanja: 150.000 mm/min, največja dolžina izdelka: 1.200 mm, Ta kovinska tračna žaga je bila izdelana leta 2019. Model MEBAeco 510 ima rezalno zmogljivost Ø 510 mm in 700 × 510 mm za pravokotne materiale. Opremljena je z zmogljivim motorjem z močjo 7,5 kW in hitrostjo tračnega lista od 15 do 150 m/min. Izkoristite priložnost in kupite to kovinsko tračno žago MEBAeco 510 za Vaša rezalna dela. Za dodatne podrobnosti nas kontaktirajte.
• Kot reza: 90°
• Rezalna zmogljivost (okroglo / pravokotno): Ø 510 mm / 700 × 510 mm
• Moč motorja: 7,5 kW
• Velikost tračnega lista: 6100 × 41 × 1,3 mm
Ffjdpfxeyhqf Ss Abvow
• Hitrost tračnega lista: 15–150 m/min
• Dolžina ostanka (ročno), brez vpenjala: 25 mm
• Dolžina ostanka (ročno), z vpenjalom: 160 mm
• Največja velikost materiala z vpenjalom: Ø 510 mm / 700 × 500 mm
• Minimalna dolžina reza: 5 mm
• Delovna višina: 750 mm
Dražba
Se konča čez
d
h
min
s
Dražba zaključena
Baden-Württemberg
495 km
Tračna žaga za kovino
MEBAMEBARATIO 210 A
Stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, skupna masa: 1.500 kg, teža obdelovanca (maks.): 250 kg, hitrost rezanja: 75.000 mm/min, dolžina odseka (maks.): 400 mm, Brez minimalne cene – zagotovljena prodaja najvišji ponudbi!
Oddaja ponudbe zavezuje k pravočasnemu prevzemu, bodisi med 11.05.2026 in 13.05.2026 ali med 18.05.2026 in 21.05.2026!
TEHNIČNI PODATKI
Dolžina reza: pribl. 400 mm
Fedpfx Abeym Ntxevofw
Hitrost reza: do 75 m/min
Potisk žage: hidravlični
Hitrost spuščanja: 0–250 mm/min
Dimenzije tračne žage: 4.100 x 27 x 0,9 mm
Maks. masa materiala: 250 kg
PODATKI O STROJU
Pogon tračne žage: 2,2 kW
Hidravlična enota: 0,37 kW
Črpalka za hladilno tekočino: 0,12 kW
Skupna potrebna moč: min. 2,7 kW
Dimenzije in teža
Dimenzije (D x Š x V): 2.400 x 2.300 x 1.700 mm
Teža: 1.500 kg
Zunanja referenca: Lot 17 / Weilheim

Izvedite več zdaj
+44 20 806 810 84
+44 20 806 810 84
Objavite oglas zdaj
*na oglas/mesec
Mali oglas
Günzburg
438 km
Tračna žaga
MEBA320 GHSS
Pokliči
Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, Premer reza: 325 mm
Dolžina žaginega traku: 4200 mm
Širina reza: 500 mm
Hitrost žaginega traku: 15 - 150 m/min
Delovna višina: 750 mm
Ffedsylwh Uopfx Abvjw
Mali oglas
Rödermark
625 km
Dvostebrna avtomatska tračna žaga z možnostjo rezanja pod kotom
MEBAECO 335 GA
Pokliči
Stanje: dober (rabljeno), Leto izdelave: 2018, številka stroja/vozila: 68892, Offer 26014
Hydraulic Double-Column Guided Mitre Band Saw Automatic
Technical Specifications:
- Automatic operating cycle for the cutting process, hydraulic raising/lowering of the saw frame; manual mitre adjustment with hydraulic clamping
- Automatic material feed unit, motorised mitre adjustment
Fodeytn Diopfx Abvjfw
- Saw blade dimensions: 4400 x 34 x 1.1 mm
- Cutting speed, infinitely variable: 15 – 150 m/min
- Cutting pressure regulation, stepless: 10 – 15 bar
- Descent speed: 0 – 300 mm/min
- Cutting range: 30° – 90°
- at 90° round material: 335 mm
- square/flat: 500 x 335 mm
- at 45° round material: 330 mm
- square, upright: 320 x 335 mm
- at 30° square, upright: 170 x 335 mm
- Automatic material feed unit
- Discharge roller conveyor: 4000 mm
- Infeed roller conveyor: 4000 mm
- Drive: 400 V / 6.5 kW
- Required space: approx. W 2300 x H 1750 x D 2200 mm
- Weight: approx. 1,800 kg
Odkrijte več rabljenih strojev
Mali oglas
Głosków
785 km
Tračna žaga
MEBA260 GP
Pokliči
Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, MEBA 260 GP (leto 2004)
- Stolpična polavtomatska tračna žaga
- Premer rezanja gredi: 260 mm
- Dimenzije: 260x310 mm
- Rezanje pod kotom do 30° (ali 60°)
- Nemotena nastavitev hitrosti (frekvenčni pretvornik) 15–100 m/min
- Elektronski kotni pozicioner
- Oljno kapljično hlajenje
- Teža cca 700 kg
- Motor 1,5 kW
Fodpfx Aboynv U Eevofw
- Tračni list: 3350x27x0,9 mm (v kompletu trije novi listi)
- Stroj nameščen na močnih, stabilnih premičnih kolesih
- CE certifikat
- Originalna dokumentacija
Možna dostava po vsej državi (za doplačilo)
Opozorilo!!!
SPECIALIZACIJA (20 let na trgu) – TRAČNE ŽAGE ZA KOVINO. Največja izbira v državi.
Na zalogi imam še druge tračne žage za kovino vseh vrst, po naročilu dobavim tudi profesionalne naprave:
Premeri rezanja materiala od 200 mm do 1000 mm.
Avtomatske, polavtomatske in ročne izvedbe
SAMO PROFESIONALNI STROJI!!!
OBVEZNO OBIŠČITE OSTALE MOJE OGLASE!!!
STROJE PRILAGAJAM POSAMEZNIM POTREBAM!
POTREBUJETE KAKOVOSTEN STROJ PO DOBRI CENI? POKLIČITE 5047.
Mali oglas
Günzburg
438 km
Rabljena tračna žaga
MEBA320 DG
Pokliči
Stanje: dober (rabljeno), Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, Dimenzije tračnega lista: 4200 x 34 x 1,1 mm
Območje reza pri 90 stopinjah: okroglo 320 mm
Območje reza pri 90 stopinjah: ploščato 500 x 300 mm
Območje reza pri 45 stopinjah desno: okroglo 320 mm
Območje reza pri 45 stopinjah desno: ploščato 310 x 310 mm
Območje reza pri 30 stopinjah desno: okroglo 200 mm
Območje reza pri 30 stopinjah desno: ploščato 200 x 180 mm
Območje reza pri 45 stopinjah levo: okroglo 280 mm
Območje reza pri 45 stopinjah levo: ploščato 300 x 230 mm
Fjdpfxeyg Nk Rs Abvsfw
Hitrost rezanja: 18 - 115 m/min
Skupna potrebna moč: 4,5 kW
Teža stroja pribl.: 1.100 kg
Potrebna površina pribl.: 14850 x 2250 x 1300 mm
Oprema/pribor:
- Valjčne steze
Dražba
Dražba zaključena
Bayern
392 km
Tračna žaga
Mebaswing 260 GA
Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, številka stroja/vozila: 66055, Funkcionalnost: popolnoma funkcionalen, proizvajalec krmilnikov: MEBA, premer obdelovanca (maks.): 260 mm, La scie a été révisée techniquement et nouvellement peinte !
Les composants suivants ont été remplacés :
• Paliers de la poulie folle
• Paliers de la poulie motrice
• Arbre d’entraînement depuis la boîte de vitesses
• Paliers pour le centrage avant et arrière du ruban de scie
• Guides plats trempés pour le ruban de scie
• Brosses plates pour un nettoyage grossier du ruban de scie
• Brosse folle pour le nettoyage du ruban de scie
• Pressostat pour l’hydraulique
• Flexibles, y compris robinet-vanne pour l’eau de refroidissement
• Lame de scie Wikus type Marathon M42 incluant 3 lames neuves de rechange
DÉTAILS TECHNIQUES
Diamètre de coupe : 5 - 260 mm
Coupe d’onglet : en continu de 40° à 90°
DÉTAILS MACHINE
Longueur du convoyeur à rouleaux : 3000 mm
Raccordement électrique : 380 V
Intensité : 16 A
ÉQUIPEMENTS
• Réglage hydraulique de la pression de serrage pour pièces à paroi mince
Ffedsyf Hatopfx Abvjw
• Commande d’origine Meba
• Coupe unique pour sciage rapide
Mali oglas
Nemčija
650 km
Kotni tračni žaga
MebaE 220 G
Pokliči
Stanje: pripravljen za uporabo (rabljen), Dimenzije tračnega lista X/Y/Z: 2450mm/27mm/0,9mm, maksimalna zmogljivost rezanja pri 90°: 220mm/220mm, maksimalna zmogljivost rezanja pri 45°: 150mm/150mm, hitrost rezanja: 120m/min, dimenzije stroja X/Y/Z: ca. 1300mm/800mm/1500mm, teža: ca. 250kg. Ogled na lokaciji je možen.
Ffsdpfxoxl El Tj Abvow
Mali oglas
Bruchsal
586 km
Tračna žaga / MEBA DG 320
MEBA320 DG
Pokliči
Stanje: dober (rabljeno), Odkružno tračna žaga MEBA DG 320
- Območje reza 325 mm
- Pravokotni material 500x300 mm
- Odkružno 45° – okrogli material 300 mm
- Odkružno 45° – pravokotni material 300x300 mm
- Odkružno območje – brezstopenjska nastavitev 30-135°
- Hidravlično vpenjanje materiala
- Hidravlično nastavljiv pritisk žaganja
- Brezstopenjsko nastavljiva hitrost žaginega traku
- Dimenzije žaginega traku 4200x34x1,1 mm
- Naprava za hlajenje
- Samodejni izklop
Ffedpfeycwcasx Abvsw
- Nujni izklop
- Dokumentacija
Mere:
DxŠxV 1,8x1,6x1,6 m / Teža 1500 kg
Pridržujemo si pravico do napak ali tipkarskih napak.
Mali oglas
Dinkelsbühl
476 km
Tračna žaga
MEBAswing 260 DG
Pokliči
Stanje: novo, incl.
élévation hydraulique du bâti de scie avec clapet anti-retour
système de microdosage
avec et sans ligne laser pour l’indication de la ligne de coupe
Scie à ruban pour coupes droites et d’onglet, réglable en continu de
30° - 45° - 90° - 45° - 30° selon l’échelle
Le point de rotation reste inchangé pour chaque réglage d’angle, ce qui permet
une mesure de longueur précise à 90° et dans la zone d’onglet.
Vitesse de coupe : 35 et 75 m/min, 2 vitesses par changement de pôles
Ffjdpfed Tb N Ajx Abvsw
Capacité de coupe
30° à gauche Ø 130 ou 120x120 mm
45° à gauche Ø 200 ou 180x180 mm
90° Ø 260 ou 300x260 mm
45° à droite Ø 200 ou 180x180 mm
30° à droite Ø 130 ou 120x120 mm
Disponible en version "HS" avec cycle de sciage semi-automatique :
- élévation hydraulique du bâti de scie
- serrage hydraulique / course courte du matériau
- descente rapide jusqu’à l’arête supérieure du matériau
Options recommandées :
dispositif de micro-pulvérisation
traceur laser
Comparable à Behringer, Kaltenbach, Kasto, Jaespa, etc.
Mali oglas
Dinkelsbühl
476 km
Tračna žaga
MEBA320 DG
Pokliči
Stanje: novo, Comparable to Behringer, Kaltenbach, Kasto, Jaespa, etc.
Semi-automatic sawing process with clamping–cutting–saw frame lifting to preset height after completion of the cut.
Infinitely variable hydraulic monitoring of cutting pressure and feed rate at the saw band guide. This ensures optimum conditions for any sawing task, i.e. constant pressure for solid material and constant feed for thin-walled profiles.
Particularly suitable for universal use with varying cross-sections, materials, and frequent miter cuts.
The machine control system complies with CE standard 89/289.
Technical Data:
Cutting range in mm round/flat
90° 325 / 500 x 300
45° 300 / 300 x 300
30° 200 / 200 x 200
45° 300 / 300 x 300
Rapid approach of the saw frame to the material edge via pushbutton
Manual miter adjustment from 45°–90°–30°, infinitely variable on scale
The miter pivot point is the intersection of the saw band and fixed jaw, so there is no change in length measurement when the angle changes
Hydraulic full-stroke workpiece clamping – CETOP hydraulic system
Ffedpfxjt D Azcj Abvjw
At every saw frame angle, the material is clamped parallel at 90°
Complete coolant system with electric immersion pump
Central machine operation
Saw band drive with automatic end-stop
Movable band guiding arm, adjustable to material width
Saw band idler wheels with carbide guides
Chip removal brush, rotating with the band
Saw band tensioning with torque wrench
Paint finish: silver grey/blue grey (RAL 7001/ RAL 7031)
Minimum remnant length: 60mm
Cutting speed:
AC frequency controlled drive, adjustable from 15-150 m/min steplessly at the control panel
Drive motors:
Saw band: 3.0kW; 400V, 50Hz
Hydraulics: 1.1kW
Coolant pump: 0.1kW
Saw frame feed:
Infinitely variable up to 300mm/min, hydraulically controlled
Saw blade tension: mechanical with torque wrench
Saw blade dimensions: 4200x34x1.1mm
Working height: 750mm (without base elements)
Weight: 850kg
Dimensions (LxWxH): 1450x2350x1350mm
Mali oglas
Dinkelsbühl
476 km
Tračna žaga
MEBA335DG
Pokliči
Stanje: novo, Comparable to Behringer, Kaltenbach, Kasto, Jaespa, etc.
2-column-guided band saw in semi-automatic configuration with stepless dual-sided miter adjustment 30° - 45° - 90° - 135°
With patented miter system (ERP No. 0491120)
Particularly suitable for universal use with varying cross-sections, materials, and frequently changing miter cuts.
The pivot point remains unchanged at any angle setting, allowing precise length measurement at 90° and throughout the miter range.
MEBA Eco Saw Innovation 2000
The universally applicable miter band saw MEBA 335 DG is ergonomically optimized and offers an excellent price-performance ratio.
Easy central operation. The machine control complies with CE standard 89/289.
Technical Data:
Cutting capacity:
round/flat
90° 335/500x335
45° right 330/305x335
30° right 180/170x335
45° left 305/305x335
Cutting speed:
AC frequency-controlled drive 15–150 m/min, steplessly adjustable at the control panel
Drive
- Saw blade 3 kW; 400 V, 50 Hz
- Hydraulic 0.55 kW
- Coolant pump 0.11 kW
Saw frame feed:
stepless up to 300 mm/min, hydraulically controlled
Saw blade tension: Mechanical with torque wrench
Saw blade dimensions: 4400 x 34 x 1.1 mm
Working height: 750 mm (without base elements)
Fodpfx Ast Dpw Rebvefw
Weight: 1,320 kg
Bfpzm8E9K3
Dimensions (LxWxH): 1450 x 2350 x 1900 mm
Technical modifications reserved.
Standard features of the MEBA 335 DG-500
Semi-automatic cutting cycle with clamping – sawing – lifting the frame to set height after completion of the cut
MEBA high-performance package:
Stepless hydraulic cutting pressure and feed monitoring on the rear of the saw blade. This ensures optimal conditions for any sawing task, i.e. constant pressure on solid material and constant feed for thin-walled profiles.
Manual miter adjustment, digital readout accurate to 0.1°
Rapid approach of the saw frame to the material edge by push button
Patented double miter system (ERP No. 0491120)
Unique double-miter band saw, enabling both-sided miters to be set easily and economically by swiveling the saw frame and material support.
Automatic positioning of the vices and digital miter setting. The material vise automatically moves with the desired miter, ensuring the material is always clamped at right angles close to the saw blade.
The miter pivot point is the intersection of the saw blade and the fixed vice jaw, ensuring no change in length measurement with changing angle settings.
Hydraulic full-stroke workpiece clamping. Quick-action material clamping. For every angle position of the saw frame, the material is clamped parallel at 90°.
Robust two-column linear guided saw frame
Saw blade inclined 3° to the material support surface.
Central machine control
Saw frame height adjustment
Movable blade guide arm, adjustable to material width
Saw blade guide rollers with carbide guides
Traveling chip cleaning brush
Saw blade tension with torque wrench
Operating manual and spare parts list
CETOP hydraulic system
Coolant system (approx. 100 l).
Mali oglas
Dinkelsbühl
476 km
Tračna žaga
MEBA320 G HSS
Pokliči
Stanje: novo, Comparable to Behringer, Kaltenbach, Kasto, Jaespa, etc.
Semi-automatic sawing process with workpiece clamping, cutting, and automatic raising to preset height after cut completion.
Stepless hydraulic monitoring of cutting pressure and feed rate at the saw band guide. This ensures optimal conditions for every sawing task, i.e., constant pressure for solid materials and constant feed for thin-walled profiles.
Particularly suitable for versatile use with varying cross-sections, materials, and frequently changing miter cuts.
Machine controls comply with CE standard 89/289.
Technical data:
Round/flat:
90°: 325/500 x 300 mm
45°: 300/300 x 300 mm
30°: 200/200 x 200 mm
Rapid lowering of the saw frame to the material edge via push button
Manual, stepless miter adjustment from 90° to 30°, using a scale
The miter pivot point is the intersection between the saw band and the fixed vise jaw, ensuring no change in length measurement when changing angle settings
Hydraulic full-stroke workpiece clamping – CETOP hydraulic system
Material is clamped parallel at 90° for every frame angle
Complete coolant system with electric submersible pump
Centralized machine controls
Saw blade drive with automatic end-of-stroke shut-off
Movable band guide arm, adjustable to material width
Saw band guide rollers with carbide insert
drag-along chip cleaning brush
Saw band tensioning with torque wrench
Paint finish: silver-grey/blue-grey (RAL 7001/ RAL 7031)
Minimum cut-off piece length: 25 mm
Cutting speed:
AC frequency-controlled drive 15–150 m/min, stepless adjustment from control panel
Drive units:
Saw band: 3.0 kW; 400V, 50Hz
Hydraulics: 1.1 kW
Coolant pump: 0.1 kW
Saw frame feed:
Stepless up to 300 mm/min, hydraulically controlled
Saw band tensioning: Mechanical, using torque wrench
Saw band dimensions: 4200 x 34 x 1.1 mm
Working height: 750 mm (without mounting elements)
Weight: 850 kg
Dimensions (L x W x H): 1300 x 2050 x 1400 mm
Fodpfehppabsx Abvjfw
The following options are available:
Laser line indicator
Micro-spray device
Clamping pressure regulator
Support table on the infeed side
Mali oglas
Dinkelsbühl
476 km
Tračna žaga
MEBAswing 260DG HS
Pokliči
Stanje: novo, Na zalogi!
Primerljivo z Behringer, Kaltenbach, Kasto, Jaespa itd.
Polavtomatska tračna žaga z obojestransko nastavitvijo kota rezanja od 90° do 30°, brezstopenjsko z natančnostjo 0,5° po lestvici
Vključno z možnostjo mikro pršilne naprave!
Hidravlično dviganje/spuščanje okvirja žage
Polavtomatski rezalni postopek
Hidravlična pritrditev materiala / kratkohodni cilinder
Hitro spuščanje do zgornjega roba materiala
30° levo Ø 130 oz. 120x120
45° levo Ø 200 oz. 180x180
90° Ø 260 oz. 300x260
45° desno Ø 200 oz. 180x180
Fsdpfswcwggsx Abvefw
30° desno Ø 130 oz. 120x120
Dolžina ostanka kosa 25 mm
Mali oglas
Dinkelsbühl
476 km
Tračna žaga
MEBA260 AP
Pokliči
Stanje: novo, Primerljivo z Behringer, Kaltenbach, Kasto, Jaespa itd.
Rezno območje 90°
okroglo 260 mm
ploščato 300x260 mm
najmanjši premer 5 mm
NC-krmiljen, avtomatski podajalnik materiala s hidravličnim popolnim vpenjanjem materiala
Fodpfeh Tnd Asx Abvsfw
enostavno upravljanje preko NC-krmiljenja z jasnim tekstovnim prikazom
Funkcija prednastavitve materiala brez ponovnega vpenjanja pri kratkih segmentih
Stabilna, linearno vodena pomična čeljust s servopozicioniranjem za maksimalno natančnost
Samodejna nastavitev vodila traku glede na širino materiala
Priporočene opcije:
poganjana krtača za ostružke, sinhronizirana s hitrostjo traku
posebej postavljena nadzorna plošča
7" CE panel, možnost omrežne povezave, shranjevanje do 1000 zapisov, zgodovinski pomnilnik za različne funkcije in podatke itd.
Mali oglas
Dinkelsbühl
476 km
Tračna žaga
MEBA335 GA
Pokliči
Stanje: novo, Primerljivo z Behringer, Kaltenbach, Kasto, Jaespa itd.
Avtomatski dvostebrični tračni žaga za kov z brezstopenjsko nastavitvijo kota rezanja od 90°-45°-30°.
Posebej primerna za univerzalno uporabo pri različnih presecih, materialih in pogosto spreminjajočih se kotnih rezih.
Ffedjh S Nxzspfx Abvsw
Središče vrtenja ostaja nespremenjeno pri vseh kotih, kar omogoča natančno merjenje dolžine pri 90° in v kotnem območju.
Tehnični podatki:
Rezni obseg:
90° okroglo 335 mm, ploščato 500×335 mm
45° desno 330 mm, ploščato 320×335 mm
30° desno 200 mm, ploščato 200×335 mm
Dolžina reza:
Enojni hod do 600 mm, večkratni hod do 6000 mm
Hitrost rezanja:
AC motor s frekvenčnim pretvornikom, brezstopenjska nastavitev 15–150 m/min na upravljalni plošči
Z naslednjo dodatno opremo:
Prosto stoječa upravljalna konzola
Priporočene opcije:
Mikro pršilna naprava
Laserska linija
Regulator vpenjalnega tlaka
7" CE upravljalna plošča
Elementi za postavitev
Mali oglas
Dinkelsbühl
476 km
Tračna žaga
MEBA405 DG
Pokliči
Stanje: novo, Primerljivo z Behringer, Kaltenbach, Kasto, Jaespa ipd.
Patentirani kotni sistem
Nastavljiva hitrost rezanja brezstopenjsko
Hidravlično krmiljenje podajanja
Hidravlično dviganje in spuščanje okvirja žage
Hidravlično vpenjanje materiala
Zmogljiv frekvenčno krmiljen pogon žaginega traku
Območje zasučnosti 30° desno / 45° levo
Rezno območje v mm
45° levo okroglo 300, plosko 300 x 300
90° okroglo 410, plosko 620 x 410
45° desno okroglo 360, plosko 420 x 360
30° desno okroglo 300, plosko 300 x 300
Preostala dolžina brez vpenjanja v svežnju 60 mm
Priporočene opcije:
Fodpeh S Nxpefx Abvsfw
Mikropršilna naprava
Laserska oznaka
Regulator pritiska vpenjanja
Pogonska krtača za ostružke
Ročni dvižni valj
Elementi za postavitev
Mali oglas
Dinkelsbühl
476 km
Tračna žaga
MEBA335 DGA 1000
Pokliči
Stanje: novo, Comparable to Behringer, Kaltenbach, Kasto, Jaespa, etc.
Automatic material feed
Double-sided mitre cuts
Compact design
Precise material positioning via servo-controlled technology
Innovative electric saw feed with ball screw drive:
maximum cutting performance and quality while protecting the saw band
Unique and patented double mitre system:
Material is always clamped at a right angle
Cutting range in mm
90° round 335, flat 500 x 335
45° right round 330, flat 320 x 335
45° left round 305, flat 305 x 335
30° right round 180, flat 170 x 335
Minimum remnant length without bundle clamping
Manual: 80 mm
Automatic: 300 mm
Automatic cut pressure and feed monitoring
Frequency-controlled AC drive 15–150 m/min
Hydraulic full-stroke material clamping
Automatic movement of clamping vices
Minimum speed and saw band monitoring
Electric mitre rotation via servomotor
Visual program input with CNC control
Material infeed via servo-regulated ball screw drive
Fedsh S Nxdjpfx Abvsfw
The following options are recommended:
Micro-spray unit
Clamping pressure regulator
Installation elements
Mali oglas
Niederlangen
930 km
Tračna žaga
MEBA - VOLLAUTOMATMEBAeco 410 DGA 2300
Pokliči
Stanje: novo, Cutting diameter: 410 mm
Saw band length: 5800 x 41 x 1.3 mm
Table height: 750 mm
Cutting area at 90°: flat 700 x 410 mm
Cutting area at 45°: round 410 mm
Cutting area at 45°: flat 500 x 410 mm
Cutting area at 45°: round left 410 mm
Cutting area at 45°: flat left 430 x 410 mm
Cutting area at 30°: round 320 mm
Cutting area at 30°: flat 320 x 410 mm
Cutting speed: 15 - 150 m/min
Max. workpiece weight: 250 kg/m
Total power requirement: 5.5 kW
Machine weight: approx. 3,200 kg
Space requirement: approx. 4,500 x 2,800 x 2,000 mm
- The ergonomic control panel can be networked and offers various option packages
* Teleservice for remote maintenance
* Programming of sawing operations in advance planning
* Import of saw programs from CAD via DSTV interface and data export
- Automatic material feed:
- Available in compact design for shorter lengths or with a flexible feed gripper for almost any length
- Precise material positioning using servo positioning technology
- Advanced electric saw feed with ball screw:
- Maximum cutting performance and quality, gentle on the saw band
- Consistent use of cutting-edge linear ball guides:
- Smooth action, high load capacity, low maintenance and backlash-free
- Unique and patented double miter system:
- Material is always clamped at a right angle
Equipment:
- Automatic cutting pressure and feed monitoring
- Frequency-controlled AC drive, 15-150 m/min, 5.5 kW
- Hydraulic full-stroke material clamping
- Automatic movement of clamping jaws
- Automatic saw frame height adjustment
- Minimum speed and saw band monitoring
- Electric miter swiveling via servomotor
- Visualized program input with CNC control
- Integrated MEBA feed gripper system from 5–2,300 mm per stroke with integrated roller conveyor
*Special equipment:
Ffedex Sr Drepfx Abvjw
- Laser for cut line indication / marking cuts
- Powered chip brush
- Micro-dosing unit
- Clamping pressure regulation
- Material bundle clamping
- Job menu
- Material database
- Zero stop
- Scraper belt conveyor for optimal chip removal, 2,000 mm long
- Cut progression control
Mali oglas
Niederlangen
930 km
Tračna žaga
MEBAMEBAbase 24 DG-HS
Pokliči
Stanje: novo, Leto izdelave: 2025, Cutting diameter: 240 mm
Saw blade length: 2910 x 27 x 0.9 mm
Cutting width: 310 mm
Table height: 900 mm
Cutting speed: 35 + 75 m/min
Total power requirement: 1.1 / 1.8 kW
Machine weight: approx. 470 kg
Space requirement: approx. 800 x 1720 x 1450 mm
Standard features of the MEBAbase 24 DG-HS:
- MEBA mitre system: Large, swiveling table prevents saw cuts into the material support surface – reduced wear costs! Material is always clamped at a right angle close to the saw blade.
- Manual mitre adjustment from 90° to 30°, steplessly adjustable via scale, with 1.0° accuracy
- Mitre rotation point is the intersection of the saw blade and material stop, so no change in length occurs when the angle is changed
- End stops at 30° – 45° – 90° – 45°
- Hydraulic material clamping. Material is always clamped parallel at 90°, regardless of saw frame angle
- Centralized machine control
- Cutting pressure reduction via own weight of the heavy, torsion-resistant saw frame and fine adjustment according to material cross-section, using hydraulic damping cylinder and counterbalance spring
- Saw blade drive with automatic end stop
Fedowa Ui Topfx Abvjfw
- Infinitely adjustable clamping jaws
- Movable blade guide arm, adjustable to material width
- Saw blade deflection rollers with carbide guides
- Practical chip tray with drip screen
- Permanently engaged chip cleaning brush
- Mechanical saw blade tensioning
- Operating manual and spare parts list (digital)
- 1 MEBA bimetal saw blade 4/6 TPI mounted on the machine
- Complete coolant system
- Paint finish anthracite (RAL 7016)
Znak zaupanja
Prodajalci, certificirani pri Machineseeker

Mali oglas
Niederlangen
930 km
Tračna žaga
MEBA - VOLLAUTOMATMEBAeco 335 DGA 2300
Pokliči
Stanje: novo, Leto izdelave: 2025, Cutting diameter 335 mm
Saw blade length 4400 x 34 x 1.1 mm
Table height 750 mm
Feed 5 - 2300 mm per stroke
Cutting area at 90 degrees: flat 500 x 335 mm
Cutting area at 45 degrees: round 330 mm
Cutting area at 45 degrees: flat 320 x 335 mm
Cutting area at 45 degrees: round left 305 mm
Cutting area at 45 degrees: flat left 305 x 335 mm
Cutting area at 30 degrees: round 180 mm
Cutting area at 30 degrees: flat 170 x 335 mm
Cutting speed 15 - 150 m/min
Workpiece weight max. 250 kg/m
Total power requirement 3.0 kW
Machine weight approx. 2,550 kg
Ffedpfx Aboulnb Djvew
Space requirement approx. 4350 x 2300 x 1900 mm
Standard equipment of the MEBAeco 335 DGA-2300:
- Safety system according to CE standards using light barrier
- Proven MEBA double-column linear bandsaw design with integrated MEBA gripper feed system, stroke length 5 - 2300 mm
- MEBA - Visualized program entry with CNC control
Fully automatic operation with freely selectable angles between 30° - 135°, length and quantity. Simplified program creation and management for up to 255 programs.
The operator enters the sawing tasks via a cut diagram display panel. Input errors are minimized, allowing simple and reliable production order creation by different operators.
- MEBA high-performance package:
Saw feed via servo-controlled ball screw drive with automatic cutting pressure and feed monitoring, guaranteeing optimal conditions for each cutting job: constant pressure for solid material, constant feed for thin-walled profiles.
- Fast and precise material length feed via rack and pinion and AC drive, max. stroke length 2300 mm with integrated roller conveyor up to 3000 mm.
- Dual-sided opening of the gripper jaws on the feed system. Ribbed inserts for heavy material transport.
- Saw frame made from solid, vibration-damping steel welded construction.
- Saw band inclined by 3° relative to the material support surface, ensuring top cutting performance and life span when sawing steel construction profiles.
- Combined saw band guides, precision bearings for gentle saw band redirection. Beveled carbide slide guides for saw band guidance.
- Miter rotation point (zero point) is the intersection of the saw band and the fixed clamping jaw; thus, there is no change in cutting length when the angle changes. The cutting kerf width is automatically compensated at each angle position.
- NC miter angle programming. Control panel is always free-standing for these systems.
- Patented double miter clamping system (ERP No.), automatic positioning of clamping jaws. The clamping device automatically moves along with the material, according to the desired mitre, ensuring material is always clamped squarely and close to the saw band. Material clamping is performed using full stroke cylinders.
- Rapid-lowering of the saw frame via automatic height selection just above the workpiece. In serial cutting, the saw frame travels just above the material, allowing the next workpiece section to be positioned. Optimal cycle times for both single and serial cutting.
- AC frequency-controlled saw band drive, continuously adjustable from 15 - 150 m/min
- Backlash-free, preloaded, low-maintenance linear ball guides for material feed and saw frame feed, ensuring smooth and jerk-free operation.
Mali oglas
Oslo
1.560 km
Tračna žaga
MEBA407A-OV
Pokliči
Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, moč: 5,5 kW (7,48 KM), vhodna napetost: 230 V, največja širina rezanja: 407 mm, skupna višina: 2.000 mm, skupna dolžina: 1.400 mm, skupna širina: 2.500 mm, lastna masa: 3.500 kg, Obseg rezanja okroglega jekla pri 90°: 407 mm, hitrost rezanja: 300 mm/min, dolžina tračnega lista: 5.120 mm, dolžina žaginega lista: 5.120 mm, MEBA 407A-OV CNC Horizontalna žaga
Dovodne steze
Leto izdelave: 2005
Siemens krmilnik
Transporter odrezkov
5,5 kW
3,5 t
Fsdpfxexz Dkyo Abvsfw
Dimenzije: D 1,4 x Š 2,5 x V 2 m
Dolžina žaginega traku: 5120 mm
Hitrost rezanja: 15 - 150 m/min
Višina vpenjanja: 10 - 407 mm
Širina vpenjanja: 10 - 407 mm
Razpon rezanja: 407 x 407 mm
Razpon rezanja okroglega: 407 mm
Neprestano nastavljiva hitrost spuščanja: 0 - 300 mm/min.
Mali oglas
Kalina Wielka
607 km
Tračna žaga
MEBAMebamat 330
Pokliči
Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Tehnične specifikacije:
Premer reza: 330 mm
Ffsdpjx H Rynofx Abvjw
Obseg reza (90° ravno): 350 x 330 mm
Dolžina rezilnega traku: 4900×34×1,1 mm
Hitrost reza: 15−150 m/min (nastavljiva)
Maks. masa obdelovanca: 670 kg/m
Skupna potreba po moči: 3,9 kW
Višina mize: 750 mm
Teža stroja pribl.: 2600 kg
Potrebni prostor pribl.: 1700×2400×2200 mm
Oprema:
Laserska linija za označevanje reza / označevanje
Nadzor poteka reza
Nadzor materiala
Baza podatkov materialov
Nastavitev sile pritiska
Ničelni omejevalnik
Meni nalog
Vpenjalo za rezanje snopov
Navpični valj
Odpiranje z obeh strani / skrajšan končni ostanek
Upravljanje in udobje:
Vrtljiv nadzorni panel
LED delovna osvetlitev
Odbiralna miza
Vodna pršilna pištola
Upravljanje ostružkov in hladilne tekočine:
Polžasti transporter ostružkov
Mikrodoziranje
Nadzor nivoja in pretoka hladilne tekočine
Mali oglas
Kalina Wielka
607 km
Tračna žaga
MEBAMebaEco 410DGA
Pokliči
Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Technical data:
• Cutting diameter: 410 mm
• Blade dimensions: 5800 x 41 x 1.3 mm
• Feed range: from 5 to 2300 mm per stroke
• Cutting area at 90°: flat workpieces 700 mm x 410 mm
• Cutting range at 45°: approx. 410 mm
• Cutting area at 45°: flat workpieces 500 x 410 mm
• Round cutting at 45° (left side): 305 mm
• Cutting area at 45° (left side): flat 430 x 410 mm
• Maximum cutting range at 30°: approx. 320 mm
• Cutting area at 30°: flat 320 x 410 mm
• Cutting speed: steplessly adjustable from 15 to 150 m/min
• Maximum material load: 250 kg/m
• Total installed power: 5.5 kW
• Machine weight: approx. 3,450 kg
Standard equipment MEBAeco 410 DGA-2300:
• CE-compliant access protection via light barrier.
• Robust, dual-column linear bandsaw design by MEBA with automatic material feed system (range 5–2300 mm per stroke).
• CNC control allowing for easy program entry and visualization.
• Automatic angle cutting in the range of 30°–135°, with adjustable length and quantity settings.
• Ability to create and manage up to 255 cutting programs.
• Intuitive data input to minimize operator errors.
• Sensor monitoring band breakage.
• Hydraulic blade tensioning.
• Blade cleaning brush with separate motor.
• Laser cutting line indicator.
• Micro-sprayer, blade cooling by oil application.
MEBA High Performance Package:
• Saw feed driven by servo motor and ball screw mechanism with automatic monitoring of cutting pressure and feed.
• Consistent and optimized cutting conditions for a variety of materials, including thin-walled profiles.
• Precise and fast material positioning using an AC rack drive with up to 2300 mm stroke and integrated powered roller conveyor up to 3000 mm.
• Jaw clamping system with dual-sided opening, equipped with bars for transporting heavier materials.
Construction and functionality:
• Robust saw frame made of welded, vibration-resistant steel.
• Saw blade positioned at a 3° angle to the table for increased performance and blade longevity when cutting steel profiles.
• Integrated blade guides with precision bearings to minimize blade deviation.
• Carbide sliding guides for maximum precision.
• Zero point (miter rotation) located at the intersection of the blade with the movable clamping jaw, eliminating the need for length correction when changing angles.
• Automatic angle programming via control panel.
Vise system:
• Patented double miter vise system with automatic angle adjustment, ensuring secure and precise material clamping close to the cutting line.
Ffodpfxsx Hycle Abvow
• Clamping performed by full-stroke cylinders.
Other features:
• Automatic lowering of the saw frame in front of the material at the start of the cut to minimize cycle times.
• Optimal setup for both single and series cuts.
• Steplessly adjustable bandsaw drive speed controlled by inverter (15–150 m/min).
• Precision pre-machined components to eliminate backlash.
Olajšamo vam iskanje: "meba"
Nove ponudbe prejmete takoj in brezplačno po e-pošti.
Iskalno nalogo lahko kadar koli preprosto končate.
Rabljeni Meba (35)
Zdaj preiščite celoten Machineseeker z več kot 200.000 rabljenimi stroji.Brskajte po najbolj priljubljenih poimenovanjih strojev:

Izvedite več zdaj
+44 20 806 810 84
+44 20 806 810 84
Objavite oglas zdaj
*na oglas/mesec


































































































































