Potopna posoda

MEBA

Stanje: rabljeno, Leto izdelave: 2012, Cutting diameter: 410 mm Saw band length: 5800 x 41 x 1.3 mm Table height: 750 mm Cutting width: 430 mm Cutting area at 90°: round 410 mm Cutting area at 90°: flat 700 x 410 mm Cutting area at 45°: round 410 mm Cutting area at 45°: flat 500 x 410 mm Cutting area at 30°: round 320 mm Cutting area at 30°: flat 320 x 410 mm Cutting speed: 15 - 150 m/min Total power requirement: 5.5 kW Klodjyb S Emjpfx Af Nel Machine weight: approx. 3,200 kg Space required: approx. 4,500 x 2,800 x 2,000 mm Equipment: - Automatic cutting pressure and feed monitoring - Frequency-controlled AC drive, 15-150 m/min, 5.5 kW - Hydraulic full-stroke material clamping - Automatic movement of the clamping vices - Automatic saw frame height adjustment - Minimum speed and saw band monitoring - Electric mitre adjustment via servo motor - Visualized program entry with CNC control - Integrated MEBA gripper feed system from 5-2,300 mm per stroke with integrated roller conveyor *Special equipment: - Laser line for cutting line display / scribing - Powered chip brush - Micro-dosing unit - Clamping pressure regulation - Material bundle clamping - Job menu - Material database - Zero stop - Scraper belt conveyor for optimal chip removal, 2,000 mm length - Cut deviation monitoring

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Deilman S, Dipping tank, 6.5 m long, 1.4 m wide, and 1.5 m high, equipped with a 6 m loading platform. We also offer other dipping tanks, including models with a length of 12.5 m. Kodpfjudwdwox Af Nsll

Leto izdelave: 2001, obratovalne ure: 33.733 h, Stanje: pripravljen za uporabo (rabljen), Splošni podatki Klsdpfx Aox Sz Exef Nel Mere širina 4400 mm // 6100 mm Mere globina 3300 mm // 2100 mm Mere višina 2800 mm // 3000 mm Teža stroja 6055 kg // 9000 kg Mediji Poraba energije 11 kW Gre za sistem za žaganje in vrtanje. Stroja MEBA 560 DG-1000 in PEDDINGHAUS TDK 1000 /9P sta bila izdelana leta 2001. Sistem vključuje tračno žago za kovino z zmogljivostjo rezanja pri 90°: okroglo 560 mm, ploščato 1000×560 mm. Dimenzije žaginega lista so 9300×54×1,6 mm, hitrost rezanja je med 18 in 95 m/min. Vrtalni stroj ima 9 sveder vreten, po 3 na osi. Razmislite o nakupu tega sistema za žaganje in vrtanje. Za več informacij o stroju nas kontaktirajte. Vrste uporabe Žaganje

Stanje: novo, Cutting diameter: 410 mm Saw band length: 5800 x 41 x 1.3 mm Table height: 750 mm Cutting area at 90°: flat 700 x 410 mm Cutting area at 45°: round 410 mm Cutting area at 45°: flat 500 x 410 mm Cutting area at 45°: round left 410 mm Cutting area at 45°: flat left 430 x 410 mm Cutting area at 30°: round 320 mm Cutting area at 30°: flat 320 x 410 mm Cutting speed: 15 - 150 m/min Max. workpiece weight: 250 kg/m Total power requirement: 5.5 kW Machine weight: approx. 3,200 kg Space requirement: approx. 4,500 x 2,800 x 2,000 mm - The ergonomic control panel can be networked and offers various option packages * Teleservice for remote maintenance * Programming of sawing operations in advance planning * Import of saw programs from CAD via DSTV interface and data export - Automatic material feed: - Available in compact design for shorter lengths or with a flexible feed gripper for almost any length - Precise material positioning using servo positioning technology - Advanced electric saw feed with ball screw: - Maximum cutting performance and quality, gentle on the saw band - Consistent use of cutting-edge linear ball guides: - Smooth action, high load capacity, low maintenance and backlash-free - Unique and patented double miter system: - Material is always clamped at a right angle Equipment: - Automatic cutting pressure and feed monitoring - Frequency-controlled AC drive, 15-150 m/min, 5.5 kW - Hydraulic full-stroke material clamping - Automatic movement of clamping jaws - Automatic saw frame height adjustment - Minimum speed and saw band monitoring - Electric miter swiveling via servomotor - Visualized program input with CNC control - Integrated MEBA feed gripper system from 5–2,300 mm per stroke with integrated roller conveyor *Special equipment: - Laser for cut line indication / marking cuts - Powered chip brush - Micro-dosing unit - Clamping pressure regulation - Material bundle clamping Kodox Sr Drspfx Af Noll - Job menu - Material database - Zero stop - Scraper belt conveyor for optimal chip removal, 2,000 mm long - Cut progression control

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2010, Rabljeni stroj za lupljenje lubja Wiedemann 900 naprodaj. Hitrost pomika 20 m/min, rotor 30 kW. Stroj je trenutno na voljo iz tovarne Untersteinach; ob nakupu bo popolnoma obnovljen in na novo prebarvan v tovarni. Kledpfxow I Si Sj Af Njl Cena na povpraševanje.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, 2 speeds 35/75 m/min Saw band speed: 15–150 m/min Saw band dimensions: 4200 x 34 x 1.1 mm Cutting capacity at 90° round: 325 mm Cutting capacity at 90° flat: 500 x 300 mm Cutting capacity at 45° right, round: 300 mm Cutting capacity at 45° right, flat: 300 x 300 mm Cutting capacity at 30° right, round: 200 mm Cutting capacity at 30° right, flat: 200 x 200 mm Cutting capacity at 45° left, round: 300 mm Cutting capacity at 45° left, flat: 300 x 300 mm Minimum remnant length without bundle clamping – manual: 85 mm Minimum remnant length with bundle clamping – manual: 260 mm Smallest diameter: 5 mm Working height: 750 mm Total power requirement: 3.0 kW Dimensions: 1,450 x 2,200 x 1,400 mm Equipment/Accessories: Kledpfjx Sq Tfex Af Njl - Rapid mitre adjustment from 30°–150°, stepless, with digital mitre display accurate to 0.1° - Quick-release material clamping: At every saw frame angle, material is clamped parallel at 90° - MEBA high-performance package "HSS" version – hydraulic lifting and lowering of the saw frame and hydraulic clamping of the workpiece Stepless hydraulic adjustment of cutting pressure and feed rate Lowering speed display via scale; cutting pressure display via manometer Saw frame rapid descent to material edge via push button - Frequency-controlled AC drive 15–150 m/min – 3 kW - Hydraulic full-stroke material clamping - Machine base with chip collecting tray - Saw band drive with automatic end stop - Precision carbide roller guides for saw blade, with saw band brush - Complete coolant system with electric immersion pump - 1 saw band mounted on the machine, 4–6 TPI

Stanje: novo, Leto izdelave: 2025, Cutting diameter: 240 mm Saw blade length: 2910 x 27 x 0.9 mm Cutting width: 310 mm Table height: 900 mm Cutting speed: 35 + 75 m/min Total power requirement: 1.1 / 1.8 kW Machine weight: approx. 470 kg Space requirement: approx. 800 x 1720 x 1450 mm Standard features of the MEBAbase 24 DG-HS: - MEBA mitre system: Large, swiveling table prevents saw cuts into the material support surface – reduced wear costs! Material is always clamped at a right angle close to the saw blade. - Manual mitre adjustment from 90° to 30°, steplessly adjustable via scale, with 1.0° accuracy - Mitre rotation point is the intersection of the saw blade and material stop, so no change in length occurs when the angle is changed - End stops at 30° – 45° – 90° – 45° - Hydraulic material clamping. Material is always clamped parallel at 90°, regardless of saw frame angle - Centralized machine control - Cutting pressure reduction via own weight of the heavy, torsion-resistant saw frame and fine adjustment according to material cross-section, using hydraulic damping cylinder and counterbalance spring Kledpfx Aewa Ui Tsf Njl - Saw blade drive with automatic end stop - Infinitely adjustable clamping jaws - Movable blade guide arm, adjustable to material width - Saw blade deflection rollers with carbide guides - Practical chip tray with drip screen - Permanently engaged chip cleaning brush - Mechanical saw blade tensioning - Operating manual and spare parts list (digital) - 1 MEBA bimetal saw blade 4/6 TPI mounted on the machine - Complete coolant system - Paint finish anthracite (RAL 7016)

Stanje: rabljeno, Leto izdelave: 1989, Funkcionalnost: popolnoma funkcionalen, Potopna naprava Gebr., proizvajalec Bachhäubl HS2 12,5 - 12,50 m dolžina x 1,50 m širina x 1,50 m višina, čiste mere; - Letnik 1989; - Upravljanje s časovnim relejem za nastavitev časa potopa. - Lesen nastavek z okvirjem ca. 7 m dolg, pritisni element s 7 zobmi, ca. 7 m dolg; - Notranji bazen v dobrem stanju, - enostenska, brez lovilnega korita! Kledpfx Aex Aktwsf Nsl - Teža ca. 8,5 tone - Transportne mere ca. 13,00 x 2,35 x 2,80 m - Naprava brez impregnacijskega sredstva in brez blata, - prosta za nakladanje na tovornjak!!

Stanje: novo, Leto izdelave: 2025, Cutting diameter 335 mm Kjdpsulnb Dofx Af Nell Saw blade length 4400 x 34 x 1.1 mm Table height 750 mm Feed 5 - 2300 mm per stroke Cutting area at 90 degrees: flat 500 x 335 mm Cutting area at 45 degrees: round 330 mm Cutting area at 45 degrees: flat 320 x 335 mm Cutting area at 45 degrees: round left 305 mm Cutting area at 45 degrees: flat left 305 x 335 mm Cutting area at 30 degrees: round 180 mm Cutting area at 30 degrees: flat 170 x 335 mm Cutting speed 15 - 150 m/min Workpiece weight max. 250 kg/m Total power requirement 3.0 kW Machine weight approx. 2,550 kg Space requirement approx. 4350 x 2300 x 1900 mm Standard equipment of the MEBAeco 335 DGA-2300: - Safety system according to CE standards using light barrier - Proven MEBA double-column linear bandsaw design with integrated MEBA gripper feed system, stroke length 5 - 2300 mm - MEBA - Visualized program entry with CNC control Fully automatic operation with freely selectable angles between 30° - 135°, length and quantity. Simplified program creation and management for up to 255 programs. The operator enters the sawing tasks via a cut diagram display panel. Input errors are minimized, allowing simple and reliable production order creation by different operators. - MEBA high-performance package: Saw feed via servo-controlled ball screw drive with automatic cutting pressure and feed monitoring, guaranteeing optimal conditions for each cutting job: constant pressure for solid material, constant feed for thin-walled profiles. - Fast and precise material length feed via rack and pinion and AC drive, max. stroke length 2300 mm with integrated roller conveyor up to 3000 mm. - Dual-sided opening of the gripper jaws on the feed system. Ribbed inserts for heavy material transport. - Saw frame made from solid, vibration-damping steel welded construction. - Saw band inclined by 3° relative to the material support surface, ensuring top cutting performance and life span when sawing steel construction profiles. - Combined saw band guides, precision bearings for gentle saw band redirection. Beveled carbide slide guides for saw band guidance. - Miter rotation point (zero point) is the intersection of the saw band and the fixed clamping jaw; thus, there is no change in cutting length when the angle changes. The cutting kerf width is automatically compensated at each angle position. - NC miter angle programming. Control panel is always free-standing for these systems. - Patented double miter clamping system (ERP No.), automatic positioning of clamping jaws. The clamping device automatically moves along with the material, according to the desired mitre, ensuring material is always clamped squarely and close to the saw band. Material clamping is performed using full stroke cylinders. - Rapid-lowering of the saw frame via automatic height selection just above the workpiece. In serial cutting, the saw frame travels just above the material, allowing the next workpiece section to be positioned. Optimal cycle times for both single and serial cutting. - AC frequency-controlled saw band drive, continuously adjustable from 15 - 150 m/min - Backlash-free, preloaded, low-maintenance linear ball guides for material feed and saw frame feed, ensuring smooth and jerk-free operation.

Stanje: novo, incl. élévation hydraulique du bâti de scie avec clapet anti-retour système de microdosage avec et sans ligne laser pour l’indication de la ligne de coupe Scie à ruban pour coupes droites et d’onglet, réglable en continu de 30° - 45° - 90° - 45° - 30° selon l’échelle Le point de rotation reste inchangé pour chaque réglage d’angle, ce qui permet une mesure de longueur précise à 90° et dans la zone d’onglet. Kedpfx Aed Tb N Ajf Njll Vitesse de coupe : 35 et 75 m/min, 2 vitesses par changement de pôles Capacité de coupe 30° à gauche Ø 130 ou 120x120 mm 45° à gauche Ø 200 ou 180x180 mm 90° Ø 260 ou 300x260 mm 45° à droite Ø 200 ou 180x180 mm 30° à droite Ø 130 ou 120x120 mm Disponible en version "HS" avec cycle de sciage semi-automatique : - élévation hydraulique du bâti de scie - serrage hydraulique / course courte du matériau - descente rapide jusqu’à l’arête supérieure du matériau Options recommandées : dispositif de micro-pulvérisation traceur laser Comparable à Behringer, Kaltenbach, Kasto, Jaespa, etc.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, Linija za izdelavo strešnih letvic Raimann s sistemi za minibandanje in zlaganje. Vključuje: - dovajalni mehanizem - razžagovalka Raimann Profirip 340 (2019) - izhodni gumijasti tračni transporter - izmetalni valjčni transporter - akumulacijski transporter (pred minibandanjem) - stroj za minibandanje (4 mb/min) - akumulacijski transporter (po minibandanju) - avtomatski zlagalnik (7 slojev/min) Ksdpfx Afemk S S Ej Njll Parametri Raimann Profirip 340: Leto izdelave: 2019 Hitrost podajanja: 10–80 m/min Glavni motor: 55 kW Višina reza: 15–140 mm Največja širina: 340 mm Linija je v dobrem delovnem stanju, še vedno v obratovanju in na ogled v žagi na Slovaškem. Razlog za prodajo je nadgradnja na črto skobeljnika s hitrostjo 250 m/min. Za več informacij ali dogovor za ogled nas prosimo kontaktirajte.

Stanje: novo, Comparable to Behringer, Kaltenbach, Kasto, Jaespa, etc. Semi-automatic sawing process with clamping–cutting–saw frame lifting to preset height after completion of the cut. Kjdpfjt D Azcsx Af Nsll Infinitely variable hydraulic monitoring of cutting pressure and feed rate at the saw band guide. This ensures optimum conditions for any sawing task, i.e. constant pressure for solid material and constant feed for thin-walled profiles. Particularly suitable for universal use with varying cross-sections, materials, and frequent miter cuts. The machine control system complies with CE standard 89/289. Technical Data: Cutting range in mm round/flat 90° 325 / 500 x 300 45° 300 / 300 x 300 30° 200 / 200 x 200 45° 300 / 300 x 300 Rapid approach of the saw frame to the material edge via pushbutton Manual miter adjustment from 45°–90°–30°, infinitely variable on scale The miter pivot point is the intersection of the saw band and fixed jaw, so there is no change in length measurement when the angle changes Hydraulic full-stroke workpiece clamping – CETOP hydraulic system At every saw frame angle, the material is clamped parallel at 90° Complete coolant system with electric immersion pump Central machine operation Saw band drive with automatic end-stop Movable band guiding arm, adjustable to material width Saw band idler wheels with carbide guides Chip removal brush, rotating with the band Saw band tensioning with torque wrench Paint finish: silver grey/blue grey (RAL 7001/ RAL 7031) Minimum remnant length: 60mm Cutting speed: AC frequency controlled drive, adjustable from 15-150 m/min steplessly at the control panel Drive motors: Saw band: 3.0kW; 400V, 50Hz Hydraulics: 1.1kW Coolant pump: 0.1kW Saw frame feed: Infinitely variable up to 300mm/min, hydraulically controlled Saw blade tension: mechanical with torque wrench Saw blade dimensions: 4200x34x1.1mm Working height: 750mm (without base elements) Weight: 850kg Dimensions (LxWxH): 1450x2350x1350mm

Stanje: novo, Comparable to Behringer, Kaltenbach, Kasto, Jaespa, etc. Semi-automatic sawing process with workpiece clamping, cutting, and automatic raising to preset height after cut completion. Stepless hydraulic monitoring of cutting pressure and feed rate at the saw band guide. This ensures optimal conditions for every sawing task, i.e., constant pressure for solid materials and constant feed for thin-walled profiles. Particularly suitable for versatile use with varying cross-sections, materials, and frequently changing miter cuts. Machine controls comply with CE standard 89/289. Technical data: Round/flat: 90°: 325/500 x 300 mm 45°: 300/300 x 300 mm 30°: 200/200 x 200 mm Rapid lowering of the saw frame to the material edge via push button Manual, stepless miter adjustment from 90° to 30°, using a scale The miter pivot point is the intersection between the saw band and the fixed vise jaw, ensuring no change in length measurement when changing angle settings Hydraulic full-stroke workpiece clamping – CETOP hydraulic system Material is clamped parallel at 90° for every frame angle Complete coolant system with electric submersible pump Centralized machine controls Saw blade drive with automatic end-of-stroke shut-off Movable band guide arm, adjustable to material width Saw band guide rollers with carbide insert drag-along chip cleaning brush Saw band tensioning with torque wrench Paint finish: silver-grey/blue-grey (RAL 7001/ RAL 7031) Minimum cut-off piece length: 25 mm Cutting speed: AC frequency-controlled drive 15–150 m/min, stepless adjustment from control panel Drive units: Saw band: 3.0 kW; 400V, 50Hz Hydraulics: 1.1 kW Coolant pump: 0.1 kW Saw frame feed: Stepless up to 300 mm/min, hydraulically controlled Saw band tensioning: Mechanical, using torque wrench Saw band dimensions: 4200 x 34 x 1.1 mm Kodpshppabofx Af Noll Working height: 750 mm (without mounting elements) Weight: 850 kg Dimensions (L x W x H): 1300 x 2050 x 1400 mm The following options are available: Laser line indicator Micro-spray device Clamping pressure regulator Support table on the infeed side

Stanje: novo, Leto izdelave: 2021, A new Nicholson A6/35” 5-arm machine with roll drive is being offered for sale. The machine is still in its original packaging. Assembly and commissioning can be carried out by us. Klodjwt T Unspfx Af Nol

Stanje: novo, Comparable to Behringer, Kaltenbach, Kasto, Jaespa, etc. 2-column-guided band saw in semi-automatic configuration with stepless dual-sided miter adjustment 30° - 45° - 90° - 135° With patented miter system (ERP No. 0491120) Particularly suitable for universal use with varying cross-sections, materials, and frequently changing miter cuts. The pivot point remains unchanged at any angle setting, allowing precise length measurement at 90° and throughout the miter range. MEBA Eco Saw Innovation 2000 The universally applicable miter band saw MEBA 335 DG is ergonomically optimized and offers an excellent price-performance ratio. Easy central operation. The machine control complies with CE standard 89/289. Technical Data: Cutting capacity: round/flat 90° 335/500x335 45° right 330/305x335 30° right 180/170x335 45° left 305/305x335 Cutting speed: AC frequency-controlled drive 15–150 m/min, steplessly adjustable at the control panel Drive - Saw blade 3 kW; 400 V, 50 Hz - Hydraulic 0.55 kW - Coolant pump 0.11 kW Saw frame feed: stepless up to 300 mm/min, hydraulically controlled Saw blade tension: Mechanical with torque wrench Saw blade dimensions: 4400 x 34 x 1.1 mm Working height: 750 mm (without base elements) Weight: 1,320 kg Bfpzm8E9K3 Dimensions (LxWxH): 1450 x 2350 x 1900 mm Technical modifications reserved. Standard features of the MEBA 335 DG-500 Semi-automatic cutting cycle with clamping – sawing – lifting the frame to set height after completion of the cut MEBA high-performance package: Stepless hydraulic cutting pressure and feed monitoring on the rear of the saw blade. This ensures optimal conditions for any sawing task, i.e. constant pressure on solid material and constant feed for thin-walled profiles. Manual miter adjustment, digital readout accurate to 0.1° Rapid approach of the saw frame to the material edge by push button Klsdpfx Afjt Dpw Re Nol Patented double miter system (ERP No. 0491120) Unique double-miter band saw, enabling both-sided miters to be set easily and economically by swiveling the saw frame and material support. Automatic positioning of the vices and digital miter setting. The material vise automatically moves with the desired miter, ensuring the material is always clamped at right angles close to the saw blade. The miter pivot point is the intersection of the saw blade and the fixed vice jaw, ensuring no change in length measurement with changing angle settings. Hydraulic full-stroke workpiece clamping. Quick-action material clamping. For every angle position of the saw frame, the material is clamped parallel at 90°. Robust two-column linear guided saw frame Saw blade inclined 3° to the material support surface. Central machine control Saw frame height adjustment Movable blade guide arm, adjustable to material width Saw blade guide rollers with carbide guides Traveling chip cleaning brush Saw blade tension with torque wrench Operating manual and spare parts list CETOP hydraulic system Coolant system (approx. 100 l).