Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, proizvajalec krmilnikov: Klöckner-Möller und SPS-Siemens, dolžina obdelovanca (maks.): 2.500 mm, teža obdelovanca (maks.): 50 kg, višina zlaganja: 1.200 mm, Auction of a Feeding and Stacking System for the Furniture Industry! Bargstedt TBH20/ER/25/08/S (Single-sided Feeding Station, Machine No. 0-280-07-7582) - 1 driven stacking roller conveyor - 1 lifting table with driven stacking roller conveyor - 1 vacuum suction carriage (minimum workpiece size 280 x 230 mm) - 1 stripping wall - 1 central thickness adjustment for the suction carriage - 1 belt conveyor with lifting and lowering function - 1 infeed roller track with inclined supporting rollers - Suction traverse (2-lane operation, maximum 4 parts in a row) TECHNICAL DETAILS - Stacking height: 1200 mm Ijlsyg Haiehcdw Ioan - Stacking change time: 35 sec - Base throughput max.: 17 cycles/min - Maximum workpiece weight: 50 kg - Maximum workpiece length: 2,500 mm MACHINE DETAILS - Controls: Klöckner-Möller and Siemens PLC - Total connected load: 14 kW - Compressed air consumption: 81 NL/min - Operating pressure: 6 bar Bargstedt TDK 10/25/10 (Turntable station from longitudinal to transverse, Machine No. 0-282-07-7584) TECHNICAL DETAILS - Roller diameter: 65 mm - Roller pitch: 125 mm - Maximum workpiece weight: 50 kg - Feed rate: steplessly adjustable from 10 - 50 m/min MACHINE DETAILS - Total connected load: 2 kW - Air consumption: 27 NL/min - Operating pressure: 6 bar Bargstedt TDK 10/25/10 (Turntable station from transverse to longitudinal, Machine No. 0-282-07-7585) TECHNICAL DETAILS - Roller diameter: 65 mm - Roller pitch: 125 mm - Maximum workpiece weight: 50 kg - Feed rate: steplessly adjustable from 10 - 50 m/min MACHINE DETAILS - Total connected load: 2 kW - Air consumption: 1 NL/min Bargstedt TSH20/ER/25/08/S (Single-sided Stacking Station, Machine No. 0-281-07-7589) - 1 lifting and lowering single-sheet transport - 1 vacuum suction carriage (minimum workpiece size 280 x 230 mm) - 1 central thickness adjustment for the suction carriage, adjustable to board thickness for take-over - 1 lifting table with driven stacking roller conveyor - 1 driven stacking roller conveyor, installed behind the stacking station - Suction traverse (2-lane operation, maximum 4 parts in a row) TECHNICAL DETAILS - Stacking height: 1200 mm - Stacking change time: 35 sec - Base throughput max.: 17 cycles/min - Maximum workpiece weight: 50 kg - Maximum workpiece length: 2,500 mm MACHINE DETAILS - Controls: Klöckner-Möller and Siemens PLC - Total connected load: 14 kW - Compressed air consumption: 81 NL/min - Operating pressure: 6 bar

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, TECHNICAL DETAILS Workpiece length: min. 250 - max. 2500 mm Workpiece width: min. 70 - max. 1000 mm Workpiece thickness: min. 4 mm - max. 80 mm Workpiece stacking: max. 2 pieces Vertical drilling unit 2V21 HIGH SPEED 7500 Stroke in Z-direction: 60 mm Drilling depth: max. 38 mm Rotation direction: clockwise/counterclockwise Speed: 1,500 - 7,500 rpm, frequency controlled Drive: 2 x 2.7 kW Drill chuck: d = 10 mm Total drill length: 70 mm Max. drill diameter: 35 mm Spindle pitch: 32 mm Spindle type: individually controlled Horizontal drilling unit 2H4X/1Y 4 drill spindles each in X-direction 1 drill spindle each in Y-direction Drilling depth: max. 38 mm Drilling height Z-direction: 38 mm from workpiece top edge Rotation direction: clockwise/counterclockwise Speed: 1,500 - 7,500 rpm, frequency controlled Drill chuck: d = 10 mm Total drill length: 70 mm Max. drill diameter: 20 mm Ijlhcdsyg E R Hjw Iean Spindle type: individually controlled Grooving saw unit N2 X-Y 90° Cutting depth: 30 mm Cutting cross-section: max. 70 mm² Speed: 1,500 - 7,500 rpm, frequency controlled Tool diameter: 125 mm Saw blade thickness: max. 5 mm Milling unit F2-ETP-6 KW Tool holder: for shank diameter d = 25 mm Tool diameter: max. 60 mm Tool projection length: min. 65 mm / max. 95 mm Tool weight: max. 2.5 kg Tool clamping: manual, hydro quick-change system ETP 25 Rotation direction: clockwise/counterclockwise Speed: 6,000 - 18,000 rpm, stepless programmable Drive: frequency-controlled three-phase motor Max. power at tool: up to 5/6 kW in continuous/intermittent operation (S1/S6-50%) EQUIPMENT Material loading "IgeL-ROBOT" Lower workpiece support Upper workpiece support Vertical drilling unit 2 V 21 HIGH SPEED 7500 Horizontal drilling unit 2H4X/2Y Grooving saw unit N2 X-Y 90 MILLING UNIT F2-ETP-6 KW Barcode reader, make: Datalogic

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, delovna širina: 1.300 mm, volumenski pretok: 40.000 m³/h, skupna dolžina: 7.500 mm, The auction consists of: Dryer CEFLA FEV E: Laminar Air Dryer (ECOGEL E4/5) Type: SP-FEV E – 90 kW Dryer CEFLA FEV EU: Air Knife Dryer (AQUADRY LA/5) Type: SP-FEV EU – 110 kW Cooling Zone CEFLA Air Knife Cooling Zone (AQUADRY RLA/2) Type: SP-FEV RU Roller Conveyor CEFLA TR 3000 CEFLA FEV E: Laminar Air Dryer (ECOGEL E4/5) Type: SP-FEV E – 90 kW Note: The spray booth shown in the video is not included in the scope of delivery and sale. TECHNICAL DETAILS Working width: 1,300 mm Max. drying height: 1,780 mm (excluding conveyor) Passage height: 80 mm Fan output: 40,000 m³/h MACHINE DETAILS Control: 5.7" LCD touch panel Dimensions (L x W): 7,500 x 1,783 mm Exhaust of solvent-containing air: 0–4,000 m³/h EQUIPMENT VS spark-proof fresh air/recirculating air fan Dryer CEFLA FEV EU: Air Knife Dryer (AQUADRY LA/5) Type: SP-FEV EU – 110 kW TECHNICAL DETAILS Working width: 1,300 mm Max. drying height: 1,780 mm (excluding conveyor) Passage height: 80 mm Fan output: 40,000 m³/h Iaeljyg Eynshcdw Ion MACHINE DETAILS Control: 5.7" LCD touch panel Dimensions (L x W): 7,500 x 1,783 mm Exhaust of solvent-containing air: 0–4,000 m³/h EQUIPMENT VS spark-proof fresh air/recirculating air fan Cooling Zone CEFLA Air Knife Cooling Zone (AQUADRY RLA/2) Type: SP-FEV RU TECHNICAL DETAILS Usable width: 1,300 mm Passage height: 80 mm Max. tunnel height: 1,780 mm (excluding conveyor) Max. air knife outlet speed: 32.5 m/sec Power fresh air and recirculating air fan: 3 kW Power exhaust fan: 1.5 kW Fan capacity, fresh air and recirculating air: 6,000 m³/h Fan capacity, exhaust air: 6,000 m³/h MACHINE DETAILS Control: 5.7" LCD touch panel Dimensions (L x W): 3,000 x 1,783 mm EQUIPMENT TT 4000 bar conveyor with double chain, steel guides and chromed bars Roller Conveyor CEFLA TR 3000 MACHINE DETAILS Total length: 3,000 mm EQUIPMENT Photoelectric sensor barrier for thin panels, thickness 4 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2007.10.191, širina brušenja: 1.350 mm, dolžina brusnega traku: 4.800 mm, višina obdelovanca (maks.): 150 mm, širina brusilnega traku: 1.400 mm, Automatic Sander + Dedusting Machine TECHNICAL DETAILS Sanding width: 1,350 mm Working height: 880 mm Workpiece thickness: 3 – 150 mm Conveyor bed: continuous conveyor belt Conveyor bed drive: 4.0 kW / inverter 7.5 kW Feed speed: 3 – 15 m/min Workpiece vacuum clamping system drive: 7.5 kW Units: 3 x cross sanding, 1 x longitudinal sanding, 1 x brushing unit Cross and Longitudinal Sanding Units Cross sanding unit – sanding belt dimensions: 4,800 x 150 mm Sanding belt speed: 2–20 m/s Drive power per cross sanding unit: 15 kW Pressure lamella belt dimensions cross sanding: 4,350 x 140 mm Longitudinal sanding unit – sanding belt dimensions: 2,620 x 1,400 mm Sanding belt speed longitudinal: 1.8 – 16 m/s Drive power longitudinal: 15 kW Pressure lamella belt dimensions longitudinal sanding: 1,900 x 1,380 mm Brushing Unit Brush roller diameter: 120 mm Drive power: 0.75 kW Air Requirements Air requirement cross sanding units: 91.5 m³/min Air requirement longitudinal sanding unit: 30.5 m³/min Air requirement brushing system: 18.0 m³/min Air requirement conveyor belt cleaning: 13.5 m³/min Air output workpiece vacuum clamping system: 40.0 m³/min Total air requirement: 193.5 m³/min Overall compressed air consumption: 115 m³/h MACHINE DETAILS Total power connection: approx. 80 kW Iaslhjyg Exqscdw Ijn Operating voltage: 400 V Frequency: 50 Hz Main machine dimensions Dimensions (L x W x H): 2,900 x 2,300 x 2,200 mm Weight: approx. 7,000 kg Dedusting Machine EA 8 – Machine No.: 2007.10.192 Sanding width: 1,350 mm Working height: 880 – 920 mm Workpiece thickness: 3–150 mm Required air velocity: 20 m/s Air requirement: 30.5 m³/min Conveyor bed drive: 1.1 kW / inverter 2.2 kW / 0.75 kW Feed speed: 3–15 m/min Fan drive: 5.5 kW Height adjustment drive: 0.18 kW Power connection: 7.0 kW Dimensions (L x W x H): 1,100 x 2,200 x 2,200 mm Weight: 1,900 kg EQUIPMENT - Operator terminal - Dedusting machine EA 8 - Workpiece vacuum clamping system - Multiple cross and longitudinal sanding units - Brushing unit

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, številka stroja/vozila: 113253, Funkcionalnost: popolnoma funkcionalen, skupna masa: 14.000 kg, dolžina mize: 4.500 mm, delovna širina: 260 mm, delovna višina: 150 mm, delovna dolžina: 4.500 mm, Oddaja ponudbe zavezuje k razstavljanju med 1. aprilom 2026 in 3. aprilom 2026. TEHNIČNI PODATKI Delovno območje X-os: 4.500 mm Delovno območje Y-os: 260 mm Delovno območje Z-os: 150 mm Dolžina mize: 4.500 mm Islhcdwsyh Uxyj Isan Število rezkalnih vreten: 1 kos Število mest za menjalnik orodij: 24 kos PODATKI O STROJU Poraba električne energije: 63 A Varovalka: 80 A Moč: 32,0 kW Napetost: 400 V Skupna višina: 2.900 mm Teža: 14.000 kg OPREMA Električne sheme (NL, DE, v papirni obliki) Seznam rezervnih delov (NL, DE, v papirni obliki) Uporabniški priročnik (NL, DE, v papirni obliki) Vrtalno orodje Opomba: Stroj se prodaja brez orodij.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, Dražba stroja Weinig Unimat 500! Stroj bo v uporabi do sredine maja. Ogled je možen po predhodnem dogovoru! Iaoloyh Uw Nehcdw Isn

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, številka stroja/vozila: 560123, Funkcionalnost: popolnoma funkcionalen, volumenski pretok: 16.000 m³/h, skupna dolžina: 12.000 mm, skupna širina: 2.400 mm, Oprema: CE označba, TEHNIČNI PODATKI Kapaciteta: 16.000 m³/h Islhcdjyh Nyfow Iean Število filtrskih vreč: 180 kos Priključni premer: 600 mm Glavni ventilator: 22 kos PODROBNOSTI O STROJU Mere (D x Š): 12.000 x 2.400 mm OPREMA CE označba

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, številka stroja/vozila: 5/1-107, Funkcionalnost: popolnoma funkcionalen, skupna višina: 1.730 mm, skupna dolžina: 6.100 mm, skupna širina: 1.440 mm, Oprema: CE označba, Stroj ima naslednjo konfiguracijo: 1. Predrezalna enota (orodja priložena) 2. Lepljiva enota 3. Pritiskalni valji (orodja priložena) 4. Obočna enota (orodja priložena) 5. Ni specificirano (orodja priložena) 6. Kotno zaoblitvena enota (orodja priložena) 7. Radialna vlečna enota (orodja priložena) 8. Ni specificirano (orodja priložena) 9. Ploska vlečna enota (orodja priložena) PODROBNOSTI STROJA Število enot: 9 kos Napetost: 400 V Poraba toka: 21,9 A Varovalka: 50 A Dimenzije Dimenzije (D x Š x V): 6.100 x 1.440 x 1.730 mm Transportni paket: 1 kos OPREMA Ijlhcsyh Nt Sodw Ijan CE označba

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, hitrost pomika os X: 35 m/min, model krmilnika: Power Control Steuerung PC22 mit SPS Steuerung, teža obdelovanca (maks.): 50 kg, delovna višina: 950 mm, Auction of an edge banding line! The line comprises the following machines: - BARGSTEDT O TSH200/D/30/12 - HOMAG OPTIMAT KFL 525/M1/C - HOMAG OPTIMAT TDL 510/C Turntable - HOMAG OPTIMAT KFL 526/M2/C - HOMAG OPTIMAT TDL 510/C Turntable - Wandres Brush - BARGSTEDT O TSH200/D/30/12 HOMAG OPTIMAT KFL525/M1/C TECHNICAL SPECIFICATIONS Feed speed: 15–35 m/min Edge bundle capacity Min. thickness: 0.6 mm Max. thickness: 3 mm Max. width: 30 mm Workpiece dimensions Thickness: 12–40 mm Min. size: 250 × 240 mm Max. size: 2,500 × 1,200 mm Weight: 50 kg Workpiece overhang: 30 mm Working height: 950 mm MACHINE DETAILS Control system: Power Control PC22 with PLC HOMAG OPTIMAT KFL526/M2/C Max. processing feed rate: 30 m/min Max. edge processing feed rate: 25 m/min Workpiece dimensions Thickness: 12–40 mm Min. size (L/W): 250 × 240 mm Max. size (L/W): 2,500 × 1,200 mm Weight: 50 kg Workpiece overhang: 30 mm Working height: 950 mm MACHINE DETAILS Control system: Power Control PC22 with PLC HOMAG OPTIMAT TDL310/C TECHNICAL SPECIFICATIONS Feed rate: steplessly adjustable Working height: 950 mm +/- 50 mm HOMAG OPTIMAT TDL510/C TECHNICAL SPECIFICATIONS Ielhsyghwcecdw Isan Feed rate: steplessly adjustable Working height: 950 mm +/- 50 mm HOMAG OPTIMAT TBH200/D/30/12 TECHNICAL SPECIFICATIONS Workpiece dimensions Min. workpiece size: 240 × 240 × 12 mm Max. workpiece size, single row: 3,000 × 1,200 × 60 mm Max. workpiece size, double row: 3,000 × 550 × 60 mm Max. workpiece weight: 50 kg Max. stack weight: 3,500 kg Top layer overhang: 0 mm on all sides Protective boards Min. protective board size: 800 × 240 × 19 mm Max. protective board size: 3,000 × 1,200 × 60 mm HOMAG OPTIMAT TSH200/D/30/12 TECHNICAL SPECIFICATIONS Workpiece dimensions Min. workpiece size: 240 × 240 × 12 mm Max. workpiece size, single row: 3,000 × 1,200 × 60 mm Max. workpiece size, double row: 3,000 × 550 × 60 mm Max. workpiece weight: 50 kg Max. stack weight: 3,500 kg Top layer overhang: 0 mm on all sides Protective boards Min. protective board size: 800 × 240 × 19 mm Max. protective board size: 3,000 × 1,200 × 60 mm Note: For further details regarding the equipment of individual components, please refer to the attached order confirmations.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, številka stroja/vozila: 0-201-22-3325, Funkcionalnost: popolnoma funkcionalen, dolžina obdelovanca (maks.): 5.800 mm, širina obdelovanca (maks.): 1.200 mm, model krmilnika: Homatic-CNC System PC83 mit Windows NT 4.0, hitrost pomika os X: 80 m/min, največja hitrost vretena: 18.000 obr/min, No reserve price – guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the item punctually on 20.03.2026! 4-axis CNC machining center for drilling, milling, edge banding, and finishing: Saw and crosscutting unit for tool changer Drilling and milling unit (4 spindles) for tool changer Combined flush/radius milling and finishing unit for tool changer Air nozzle for workpiece edge for tool changer Attention: The scope of delivery includes only the units mentioned above. No vacuum suction cups, tools, or tool holders—possibly shown in the pictures—are included! TECHNICAL DETAILS Console clamping table "K": 12 movable consoles for holding vacuum cups with longitudinal and side stops, 4-fold occupancy Max. workpiece length with single set-up: 5,800 mm Max. workpiece length in pendulum mode: 2,200 mm Max. workpiece width: 1,200 mm Max. workpiece thickness (with standard 100mm high suction cups) with edge: 60 mm (when dust extraction hood is in position 1) Max. workpiece thickness (with standard 100mm high suction cups) without edge: 60 mm Max. workpiece thickness (with standard 100mm high suction cups) without edge: 120 mm (when dust extraction hood is in position 2) Support equipment Drilling head: 17 vertical spindles 2x main spindle 12 kW water-cooled for HSK (speed 18,000 rpm with C-axis and 12-position disk tool changer) Separate Y-axis for 2nd main spindle plus aggregate interface with integrated pneumatics and electrics Electronic supply and swivel drive C-axis: swivel range without limitation. Edge banding unit, 360°, for changeover into right main spindle Max. edge height: 65 mm Pickup station right for glueing unit storage Pre-cutting station and triple roll magazine Adapter units Combined flush/radius cutting and finishing unit (profile scraper) Saw and crosscutting unit Ioloyic Tuohcdw Ioan Drill-milling unit, 4-spindle (crosshead) Air nozzle for workpiece edge MACHINE DETAILS Control: HOMATIC Control PC 83 with Windows (NT 4.0) EQUIPMENT WOODWOP programming system version 5.0 Network connection Laser positioning aid Chip conveyor belt Safety: Foot mats at front, side safety guards, rear: installation against wall Note: A loading aid can be provided for a deposit of €5,000. Upon return, the deposit will be refunded minus 10%.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: /, Oprema: Bluetooth, Horizontal Band Saw WRAVOR WRC 1150 AC (2017) High-performance industrial horizontal band saw, designed for cutting logs up to 1,150 mm in diameter. Powerful and reliable solution for professional sawmills and wood processing companies. Technical Specifications • Maximum log diameter: 1,150 mm • Main motor: 45 kW – powerful and efficient • Rail length: 11.0 m (max. log length: 6.5 m) • Manual thickness adjustment • PLC control system with fixed operator panel (Unitronics V-280) • Camera and monitor for precise cutting • Laser guide with holder • Hydraulic pre-cutter: 1 unit • Outfeed conveyor belt for boards Iaolhcdwoykrkbo Ien Log Handling Hydraulic System Fully equipped system for efficient log positioning: • Hydraulic log clamps – 4 units • Hydraulic clamp lifters – 4 units • Hydraulic roller lifters (forward/backward movement) – 4 units • Hydraulic 90° turners with angular positioning – 4 units • Hydraulic log rotators (chain, up/down) – 2 units • Mechanical log support – 1 unit Construction and Performance • Robust industrial construction • Cast main wheels, mounted on supports at both ends • Suitable for medium and large sawmill operations Location: EXW Slovenske Konjice, Slovenia Price: €64,900 (EXW)

Stanje: zelo dobro (rabljeno), !!!DEMONSTRACIJSKI STROJ!!! Naprodaj je skoraj nov brusilni stroj JET DDS-237 z največjo širino brušenja 940 mm. Stroj je v zelo dobrem stanju, obnovljen in preverjen s strani našega strokovnega osebja. (Popolnoma funkcionalen) Tehnični podatki: -Dvojvaljni brusilni stroj JET DDS-237 -Motor 400 V / 7,5 KM Iolhcdwsx Sqzvs Iean -Hitrost brusilnega valja 1.400 min⁻¹ -Hitrost podajanja 3 m/min -Maks. širina brušenja 940 mm -Debelina brušenja 0,8 do 133 mm -Minimalna dolžina obdelovanca 230 mm -Brusilni valj vsak 152 x 940 mm -Širina brusnega traku 75 mm ali 100 mm -Odvodna priključka 2 x premer 100 mm -Dimenzije (D x Š x V): 1.090 x 1.420 x 1.090 mm -Teža 440 kg Stroj se nahaja v A-8561 Söding in je na voljo za ogled in prevzem kadar koli v skladu z našim delovnim časom. Možnost predhodne prodaje! Sorodni izrazi: stebrni vrtalnik, namizni vrtalni stroj, sveder Referenca: R-D1618

Stanje: zelo dobro (rabljeno), Pressing area: 2500 x 1300 mm Number of press cylinders: 4 Total pressing force: 90 t Operating voltage: 3 x 400 V + N, 50 Hz Total connected load approx. 20.3 kW Space requirements (L x W x H) approx.: 2900 x 1350 x 1900 mm Weight: approx. 3600 kg Hydraulic heated platen press Underpiston design ELKOM electric heating plates Pressing pressure can be continuously adjusted via pressure switch device Two-stage hydraulic pump with automatic switching valve from low to high pressure Central control panel with all controls Analog temperature display for both heating plates Safety pull cord Rack and pinion compensation Main switch CE certified NEW ALUMINUM COVER PLATES Note on used machines: • Errors in technical specifications and prior sale excepted. • The stated prices are ex location – free loading. • The machines have been cleaned and function tested. • All machines are bought as inspected, with no warranty claims whatsoever. The buyer is free to inspect the machines at the location. • Special agreements are only possible in written form. Islhjrivrwjcdw Ioan (We respond to inquiries only when providing your address and telephone number!)

Stanje: rabljeno, Štiristranski skobeljni avtomat SCM Sintex NTE Elektronski štiristranski skobeljni in profilni rezkalni avtomat Širina skobljanja: 180 mm Višina skobljanja: 105 mm 4 vretena Motor vretena 1 + 4: 7,5 kW Motor vretena 2 + 3: 7,5 kW Premer vretena: 35 mm Dolg podajalni pult pribl. 2300 mm Hitrost vretena: 6000 obr/min Hitrost podajanja: 6/12 m/min Električno nastavljanje višine in širine Črpalka za mazivo Vključno s strojnim orodjem Stroj JE SERVISNO PREVERJEN – V ZELO DOBREM STANJU Iajlhsyi Eaaocdw Ion Iz zaloge Lieboch / MOŽNOST LEASINGA

Stanje: rabljeno, SCM TECH 99 L CNC obdelovalni center z rezkalno enoto za ključavnice Iolhcjyi D T Eedw Ijan Stroj je DELOJOČ in pripravljen za demonstracijo iz upokojitve/obrtne delavnice Na voljo na lokaciji mizarstva, kot videno

Stanje: rabljeno, SCM T 130 LL težka mizna rezkarica Islhcdwoyi D Hlo Ijan Izvedba LL – dolg miza z izvlečnim okvirjem Motor 7,5 kW 5 hitrosti 3000 - 10000 vrt/min Avtomatska nastavitev vretena gor-dol Krmilna plošča zgoraj Rezkalni omejevalnik z natančno nastavitvijo BREZ podajalne naprave Stroj JE DELUJOČ, v DOBREM STANJU Na zalogi v Liebochu

Stanje: rabljeno, težka skobeljna SCM F 520 Širina skobljanja 520 mm Dolžina mize 2.960 mm Ielhceyi Dxusdw Ioan hidravlično nastavljanje višine dovajalne mize z nožnim pedalom, z mikrometrskim prikazom odvzema ostružkov varnostni 4-nožni rezalni valj nastavitev spojnih robov (ravnih in konkavnih) glavni motor 4 kW električna zavora motorja Izvedba CE Stroj je DELOVNO SPOSOBEN v DOBREM STANJU, iz poklicne šole Na zalogi v Liebochu

Stanje: rabljeno, WEINIG Profimat 26 Super Planer and Profiling Moulder Working width: 20 - 230 mm (up to 260 mm) Working height: 8 - 120 mm (up to 140 mm) 5 working spindles, 40 mm spindle diameter Long infeed table (approx. 2000 mm) Main bottom spindle: 4 kW / Left & Right spindles: 7.5 kW each / Top spindle: 5.5 kW / Finishing bottom spindle: 5.5 kW Pneumatic pressure feed rollers Continuous cardan feed: 5 - 24 m/min, stepless adjustment Feed roller before jointer Push-button control panel Automatic lubricant pump Mechanical digital readouts CE-certified machine Year of manufacture: 2001 Supplied without tooling Ijlhoyi Dw Docdw Isan Machine is WORKSHOP-OVERHAULED and in GOOD CONDITION Machine is connected and ready for demonstration at the exhibition center Available from stock in Lieboch

Stanje: rabljeno, težka precizna formatna krožna žaga SCM SI 550 E Class Različica: tesarstvo - mizarstvo Dolžina reza: 3200 mm Širina reza: cca 1500 mm Glavni motor: 11 kW 3 hitrosti: 2500/3000/4200 o/min Kotni prislon z dolžinsko kompenzacijo Žagin list do Ø 550 mm Električno dvigovanje in nagibanje žaginega lista z digitalnimi prikazi Stroj iz upokojitve / prva dostava 2011 Stroj delavniško pregledan, v VRHUNSKEM STANJU Iasleyi Duijhcdw Isn Na zalogi v Liebochu

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, For sale is a used Hammer circular saw-shaper B3Winner Comfort with a cutting length of 2000 mm. The machine is in excellent condition and has been professionally reconditioned and inspected by our specialist staff. (Fully functional) Technical data: - Tilting circular saw and shaper 90-45° - Sliding table 2000 mm - Outrigger table with angle index - Mitre fence 1300 mm - 4 spindle speeds 3000/6000/8000/10000 rpm - Cutting width 800 mm - 2 motors, each 5.5 HP (4 kW), 400 Volt - Year of manufacture: 2019 Ijlhcdov Sbpxjw Iean The machine is located at A-8561 Söding and can be inspected at any time during our opening hours. Sale subject to prior sale! Related terms: circular saw, shaper, milling machine, combination machine, combi machine Reference: R-L0AHG

Stanje: rabljeno, Holz Her Sprint 1329 Power Heavy-duty design – Edge thickness 0.4 – 8 mm (15 mm with tool change) 21.5" PPC 332 touchscreen control fa.s.t. setting technology "Setup in the gap" Motorized, position-controlled bridge height adjustment Fully automatic edge magazine for coil and strip material, motorized Pre-milling unit for jointing before the gluing station GLU-JET cartridge glue application station – for granulate and PUR bonding, thin film technology Maximum edge height: 60 mm Glue height adjustment / sensing nozzle Pressure section 1913, motorized-pneumatic with NC servo axis End trimming unit for coil and strip material up to 15 mm edge thickness With electro-pneumatic adjustment for 0-10° bevel of the trimming saws Multifunctional milling unit MOT6 – 6 NC controlled axes: Flush trimming up to 8 mm (15 mm) Islhcsyi Algedw Ijan Radius trimming Bevel trimming 0 - 15°, pneumatic Copy milling unit MOT 4, corner copying, postforming corners with 4 NC controlled axes, for milling the upper and lower longitudinal edge and copying the front and rear vertical edge, working height 60 mm with shelf program Scraper unit MOT4 Flat scraper unit – finish with pre- and post-sensing Buffing unit for final cleaning and edge polishing with 2 textile discs, swiveling 5° Spraying system for infeed and outfeed areas, as well as antistatic agent at the pressure station Infeed area: electronically controlled separating agent spray unit Pressure section: electronically controlled antistatic spray unit Outfeed area: electronically controlled cleaning agent spray unit with cleaning fluid Air cushion table at infeed / L = 1800 mm, W = 600 mm First delivered in 2022 Machine is WORKSHOP-TESTED and in TOP CONDITION Available from stock in Lieboch

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Na prodaju je korištena Felder kombinirana mašina BF7-41 s debljinom hoblane do 230 mm. Mašina je u vrlo dobrom stanju, remontovana i provjerena od strane našeg stručnog osoblja (potpuno funkcionalna). Tehničke specifikacije: - Kružna pila i glodalica s mogućnošću nagiba 90-45° - Klizni stol 2450 mm - Kutni graničnik 1100 mm s produžetkom na 2000 mm - Širina blanjanja/debljanja 410 mm - 2-nožna blanjalica (sistem zamjenjivih noževa) - 2 brzine uvlačenja 6 + 12 m/min - Debljina obrade 4-230 mm s ručnim kotačem i digitalnim satom - 3 brzine glodanja - Ograda glodalice s multi-podešavajućim sistemom - Sigurnosne letve za ogradu glodalice - 3 motora po 5,5 KS (4kW), 400 V Kombinirana mašina se nalazi u A-8561 Söding i dostupna je za pregled u toku radnog vremena. Prodaja uz mogućnost prethodne prodaje! Povezani pojmovi: blanjalica, debljača, Felder, glodalica, mašina za glodanje, kružna pila, pila Referenca: R-E1846 Ijlhcdwjyita Is Iean

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Naprodaj je rabljena krožna žaga in rezkar Hammer B3-Winner s širino reza 800 mm. Stroj je v kot novem stanju, naše strokovno osebje ga je obnovilo in preverilo (popolnoma delujoč). Tehnični podatki: Iasloyir S Aehcdw Ien - Krožna žaga in rezkar z nagibom 90-45° - Formatni pomični voziček 1250 mm - Udarni prislon 900 mm - Višina reza 103 mm pri žagin list D315 mm - Širina reza 800 mm - 4 hitrosti rezkanja 3000/6000/8000/10000 obr/min - Priprava MF vretena - 2 motorja po 5,5 KM (4 kW) Stroj je v A-8561 Söding in si ga lahko ogledate kadarkoli v času obratovanja. Vmesna prodaja pridržana! Sorodni pojmi: žaga, krožna žaga, rezkar, kombinirani stroj, kombinirana rezkarka Referenca: R-R0029

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Naprodaj je rabljen čistozračni odsesovalni sistem Felder RL-300 z maksimalnim volumnim pretokom 6000 m³/h. Odsesovalna enota je v zelo dobrem stanju, pregledana in obnovljena s strani našega strokovnega osebja. Tehnični podatki: - Odsesovalna zmogljivost: 6.000 m³/h Ijlhcsxdlwmodw Ijan - Največji podtlak: 2.450 Pa - Priključek za odsesavanje Ø 300 mm - Prostornina za ostružke: 2 x 210 litrov - Dimenzije: 3.015 x 970 x 2.280 mm (d x š x v) - Samodejni sistem gašenja s prašnim gasilnikom - Jekleno ventilatorsko kolo - Moč motorja: 8,2 kW - Leto izdelave: 2024 Čistozračna enota se nahaja na lokaciji A-5431 Kuchl in si jo je možno ogledati v času naših uradnih ur. Vmesna prodaja pridržana! Sorodni izrazi: odsesavanje, odsesovalna enota, čistozračni sistem, čist zrak, RL Referenca: R-S1522

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Naprodaj je Felder CF5-31 Professional 4-delni kombinirani stroj z dolžino reza 2050 mm. Stroj je v naši razstavni dvorani v uporabi za razstavne namene in je zato kot nov. Tehnični podatki: - Dolžina reza 2050 mm - Višina reza 102 mm - 3 hitrosti rezkanja - Večnamenski rezkalni naslon - 4-nožni sistemski skobeljni boben - Širina skobljanja 310 mm - Dolžina ravnanja 1500 mm - Možnost odsesavanja Ø 120 mm - 3 motorji po 4 kW - Leto izdelave 2021 Ijlhcdwjyk D S Ro Isan Stroj se nahaja v A-5431 Kuchl in ga je možno kadarkoli v času našega delovnega časa ogledati. Vmesna prodaja pridržana! Sorodni izrazi: kombinirani stroj, kombinirana naprava, skobeljni stroj, debelinka, stroj za debelinsko obdelavo, krožna žaga Referenca: R-A0117