Kombinirani stroji nakup rabljenega (102)
Razvrsti rezultate
- Najnižja cena Najvišja cena
- Najnovejši oglasi Najstarejši oglasi
- Najkrajša razdalja Največja razdalja
- Najnovejše leto izdelave Najstarejše leto izdelave
- Zadnja posodobitev Najstarejša posodobitev
- Proizvajalci od A do Ž Proizvajalec od Z do A
- Pomembnost
- Najnižja cena
- Cena
- Najvišja cena
- Cena
- Najnovejši oglasi
- Datum objave
- Najstarejši oglasi
- Datum objave
- Najkrajša razdalja
- Razdalja
- Največja razdalja
- Razdalja
- Najnovejše leto izdelave
- Leto izdelave
- Najstarejše leto izdelave
- Leto izdelave
- Zadnja posodobitev
- Nazadnje posodobljeno
- Najstarejša posodobitev
- Nazadnje posodobljeno
- Proizvajalci od A do Ž
- Proizvajalec
- Proizvajalec od Z do A
- Proizvajalec
- Oznaka od A do Ž
- Oznaka
- Oznaka od Z do A
- Oznaka
- Model od A do Ž
- Model
- Model od Z do A
- Model
- Najnižja referenca
- referenca
- Najvišja referenca
- referenca
- Najkrajši obratovalni čas
- Obratovalni čas
- Najdaljši čas obratovanja
- Obratovalni čas
- Pomembnost
- Pomembnost
Stroji za obdelavo lesa Kombinirani stroji
mali oglas
Schwanberg
69 km
Kombinirani stroj
SCM Minimaxlab 300p
Klic
Stanje: novo, Multi-combination machine with aluminium sliding table for sawing, milling, surface/thickness planing and optional slot mortising
Torsion-resistant steel/cast iron construction
Machine table made of cast iron, hardened and ground
Smooth-running anodised aluminium sliding table, 10-year SCM warranty on sliding table guides
Large crosscut frame with extendable aluminium telescopic fence and fold-away stops
With combination saw/miter fence with 45° quick adjustment
Max. saw blade Ø 315 mm with optional scoring unit, tiltable from 90° to 45°
Helically geared steel infeed roller for consistent wood feed during thickness planing
Four spindle speeds, manually adjustable
Standard with forward/reverse spindle rotation
Three independent motors for each working unit
Sliding table with ball contact system
Equipped with a proven ball contact system, used millions of times
Permanently smooth operation due to hardened and ground guides
Not sensitive to dust and dirt due to minimal contact point between ball and trapezoidal rail
The extraction ports for surfacing and thickness planing are on the same (right) side. The extraction hose can therefore be used from the same side for both planing modes.
Helically geared steel infeed rollers for constant and uniform workpiece feed
Massive anti-kickback devices for operator safety
3-knife cutter block for optimal planing results
Crosscut length: 1600 mm
Max. saw blade diameter with scorer: 315 mm
Max. cutting height at 90° / 45°: 100/79 mm
Max. crosscut width left of the saw blade: 1660 mm
Cutting width at rip fence: 800 mm
Saw spindle speed: 3500 rpm
Saw blade tilt: 90° - 45°
Cedjiiyppjpfx Afqjaa
Working width: 300 mm
Surface table length: 1260 mm
Cutter block diameter / number of knives: 72 mm / 3 pcs.
Table dimensions: 300 x 450 mm
Min. / max. working height: 3 mm / 220 mm
Max. material removal: 4 mm
Feed speed: 7 m/min
Spindle diameter: 30 mm
Usable spindle length: 100 mm
Max. tool diameter retractable: 180 mm
Spindle speeds: 3500/6000/8000 rpm
Motor power: 3 x 4 kW, 400 V, 50 Hz
Extraction port diameter: 4 x 120 mm
Extraction port Ø saw blade guard: 60 mm
Weight: 430 kg
OPTIONS:
- Professional fences: EUR 300
Saw fence with quick locking and micrometric adjustment
Planer fence 90° ÷ 45°, continuously adjustable
- Scoring unit incl. saw blade: EUR 292
- Handwheel with digital readout for thickness table positioning: EUR 129
- Mobility kit: EUR 119
- 2 additional handwheels for aggregate adjustment: EUR 45
- TERSA cutter block, Ø 72 mm: EUR 212
- Xylent spiral cutterhead, 3 rows of knives: EUR 717
- Aluminium slot mortising unit: EUR 390
- 2 stop flaps for crosscut fence: EUR 150
mali oglas
Kuchl
214 km
Kombinirani stroj
MiniMaxST3W
Klic
Stanje: dober (rabljeno), Leto izdelave: 1996, Naprodaj je rabljena Mini Max ST3W krožna žaga-rezalnik z dolžino reza 2100 mm.
Stroj je v dobrem stanju, pregledan in pripravljen s strani našega strokovnega osebja.
Tehnični podatki:
- Dolžina reza: 2100 mm
- Širina reza: 950 mm
- Višina reza: 95 mm
- 4 hitrosti rezkanja
- Stikalo za smer vrtenja
- Nastavljiva po višini + nagibna
- Krožna žaga s priključkom za odsesovanje Ø 120 mm
- 2 motorja po 3 kW
- Leto izdelave: 1996
Stroj se nahaja v A-5431 Kuchl in si ga je mogoče kadar koli ogledati v času delovnih ur. Pridržujemo si pravico do vmesne prodaje!
Casdpfjxxkrxsx Afqea
Sorodni izrazi: krožna žaga, rezkalnik, rezkalni stroj, krožna žaga-rezkalnik, kombinirani stroj, kombi stroj
Referenca: R-K0ACV
mali oglas
Aalen
475 km
5-kratno kombinirani stroj
FelderCF 531
Klic
Stanje: rabljeno, Leto izdelave: 2009, največja višina reza: 102 mm, največja širina rezanja: 800 mm, premer žaginega lista: 315 mm, širina skobljanja: 310 mm, skupna dolžina površin za skobljanje: 1.500 mm, skupna širina: 2.120 mm, skupna dolžina: 2.600 mm, skupna višina: 1.300 mm, vrtljajska hitrost (min.): 3.000 obr/min, največja hitrost vrtenja: 10.000 obr/min, skupna masa: 900 kg, odstranjevanje ostružkov: 5 mm, odstranjevanje ostružkov pri površinskem obdelovanju (max.): 5 mm, število rezil rezkalnika: 4, največja hitrost vretena: 10.000 obr/min, hitrost vretena (min.): 3.000 obr/min, Oprema: dozator, No. 04501
Felder CF 531 5-in-1 Combination Machine
Used, year of manufacture 2009, in very good condition
Tilting circular saw - tilting spindle moulder - surface planer / thickness planer - preparation for slot mortising unit
Panel saw motor power: 3 kW
Scoring saw
Sliding table length: 2500 mm
Manual saw blade tilt: 90° - 45°
Saw blade diameter: 250 - 315 mm
Spindle diameter: 30 mm
Max. cutting height: 102 mm
Cedpfx Afoxzk Thsqeaa
Cutting width approx. 800 mm
Outrigger table with telescopic crosscut fence
Swivelling crosscut fence with degree scale
Spindle moulder motor power: 3 kW
Spindle table opening diameter: 180 mm
Max. cutter diameter: 300 mm
Spindle diameter: 30 mm
Manual spindle tilt: 90° - 45°
Speeds: 3000 / 6000 / 8000 / 10000 rpm
Planer/thicknesser motor power: 3 kW
4-knife cutterblock
Surface planer table length: 1500 mm
Surface planer table width: 310 mm
Max. depth of cut: 5 mm
Swivelling parallel fence: 0° - 45°
Thicknesser table length: 540 mm
Thicknessing width: 306 mm
Thicknessing height: 4 - 220 mm
Feed speed switchable: 6 m/min
Preparation for slot mortising unit
With transport device and steering bar
Machine is CE-compliant, GS-tested
Technical documentation available as PDF file
Transport dimensions approx. 2600 x 2120 x 1300 mm (LxWxH)
Weight approx. 900 kg
To avoid potential misunderstandings, an on-site inspection by appointment is possible and recommended.
Sale is made as-is.
Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee. Subject to prior sale.
For used machines, any warranty is excluded; the following applies: "purchased as seen"
Payment terms: Prices plus statutory VAT, payment prior to collection or dispatch
Delivery terms: ex stock
mali oglas
Hofstetten
220 km
Rabljena krožna žaga in rezkar Robland NLX1700
Robland
Klic
Stanje: rabljeno, Panel saw and spindle moulder Robland NLX1700, very good condition, 2 x 3 kW motors, approx. 2000 mm cutting length, approx. 100 mm cutting height, 1700 mm sliding table length, approx. 450 kg
Price subject to change. Errors, misprints, and omissions excepted.
Caedpewzzh Esfx Afqea
mali oglas
Teisnach
353 km
Kombinirana krožna žaga-freza
FelderKFS37FL
Klic
Stanje: rabljeno, Leto izdelave: 1993, Funkcionalnost: popolnoma funkcionalen, Panel Saw, Milling & Combination Machine – Table Saw, Circular Saw, Joiner's Saw, Panel Saw, Table Milling Machine, Tilting Spindle Moulder
Manufacturer: FELDER
Model: KFS37 FL
Year: 1993
Features:
- Sliding table length: 245 cm
- Manual height adjustment for saw blade
- Manual tilting of saw blade up to 45°
- Parallel fence with fine adjustment, up to approx. 75 cm
- Extension table with extendable cross-cut fence
- Mitre fence
Main Motor Power: 3 kW
Caedpfoxycy Rjx Afqea
Tilting Spindle Moulder:
- Manual height adjustment of tilting spindle
- Manual spindle tilting up to 45° to the rear
- Spindle diameter: 30 mm
- Three spindle speeds, belt-driven
- Spindle can be recessed below the table and removed
- Shaper motor power: 3 kW
- Shaper fence with fine adjustment and parallel adjustment mechanism "Felder Multi-Adjustment System"
- Swing-away power feed device
- Eccentric workpiece holder
Viewing prior to purchase is expressly recommended—simply leave your telephone number by email, and I will contact you for an appointment. Subject to prior sale. All statements made without guarantee.
Machines can be collected in person or shipped via freight forwarder at the buyer's expense. Loading and packaging can be organised by us. Freight charges are indicative, varying depending on distance and unloading options—please enquire.
The item is being sold under the differential taxation scheme.
The stated sale price is the gross final price.
No invoice with separate VAT statement will be issued.
Warranty terms: Due to age and wear, sale is exclusively to commercial buyers, with no warranty, guarantee, or right of return. All information provided without obligation. By placing a bid, the buyer accepts these conditions.
If the offered item is a used article, warranty is 12 months if the buyer qualifies as a consumer under §13 BGB. If the buyer qualifies as an entrepreneur under §14 BGB, any warranty is excluded.
If the offered item is a new article, warranty is 24 months for consumers (§13 BGB); for entrepreneurs (§14 BGB), warranty is 12 months.
Odkrijte več rabljenih strojev
mali oglas
Tauberbischofsheim
555 km
Kombiniran žagalni, rezkalni in vrtalni stroj Bäuerle KFL
BäuerleKFL
Klic
Stanje: rabljeno, Stabilni kombinirani lesnoobdelovalni stroj Bäuerle tip KFL združuje formatno krožno žago, dolbilni stroj in mizno rezkarico z podajalnikom v eni napravi in je dobavljen z obsežno dodatno opremo.
Caedpfx Afexwbpfoqea
Motorji: 2
Dolžina: cca 320 cm
Širina: cca 140 cm
Višina: cca 160 cm
Miza: Nagibna
Tehnične podrobnosti: na zahtevo
mali oglas
Bitburg
758 km
Večkombinacija
Holzkraft SCMCU 410 Elite S 32 Tersa
Klic
Stanje: novo, Leto izdelave: 2025, Maximum specification for professional users. Multi-function combination machine with TERSA cutterblock, mitre cutting unit, and tilting spindle moulder.
Cjdpfecnxa Sjx Afqsaa
Ø 350 mm main saw blade with 118 mm maximum cutting height, even with scoring blade installed.
Scoring unit with separate motor and Ø 120 mm saw blade, easily adjustable from outside.
High-precision sliding table made of anodised aluminium on hardened and polished steel guide rails.
Large outrigger table (1200 x 650 mm) with roller and extendable aluminium telescopic fence up to 3300 mm.
Saw aggregate tilts from 90° to -45°.
Tilting spindle moulder from 90° to -45° towards the fence.
Four spindle speeds.
Spindle moulder with reversible rotation direction.
Quick conversion to thicknesser thanks to parallely opening surface tables.
2-speed feed on thicknessing table.
Helical-toothed steel infeed roller for consistent wood feed.
Three independent industrial motors.
Includes separate rip fence and separate jointer fence.
Equipped with lockable main switch.
Equipment details:
Crosscut fence
Immediate control
Outrigger table
Outrigger with angle-adjustable telescopic crosscut fence with degree scale.
Sliding table with ball contact system
Made of anodised aluminium
Guides made of hardened and ground F550S steel, 15% harder than conventional steel
Guides are riveted, not glued
Smooth-running, quiet and reliable
10-year HOLZKRAFT warranty on wear of the hardened guideways
Cast iron dual trunnion saw unit
Height adjustment via dovetail guide
Extremely robust and torsion-resistant for precise cuts
Close to saw blade, supported on both sides
Height and tilt adjustable up to 45°
Scoring unit with separate 0.55 kW scoring motor as standard
Dual trunnion spindle moulder unit
Large dimensioned, tilting cast iron dual trunnion spindle moulder unit
Spindle fence
Heavy-duty professional version
The high-quality spindle fence made of cast iron is supplied with fine adjustment as standard
3-position for quick recall of settings
Fine adjustment via rack and pinion, numeric display and aluminium fence jaws
Planer section
Helical-toothed steel infeed rollers ensure consistent wood feed
Massive anti-kickback devices prevent workpiece kickback
4-knife Tersa cutterblock for optimal planing results
Table lips ensure quieter operation
Tersa planer cutterblock
No more setting or screwing
Knife change in seconds
Self-locking
Extremely quiet operation
Thicknessing table
The thicknessing table is mounted on four large-dimensioned spindles, guaranteeing maximum stability under all working conditions
Special lifting device ensures table position is maintained precisely, even without locking
Parallel fence
With fine adjustment and quick clamping
Stable round bar guide made of ground steel
Reversible aluminium fence ruler
No gap in measurement, guide bars are overlapping
Separate surface fence
Large professional design (1800 x 150 mm)
Tiltable 0-45°
With quick adjustment
Stable round bar guide made of ground steel
Simultaneous opening
Art. no.: 5500557
mali oglas
Kuchl
214 km
Kombinirani stroj
HAMMERC3 31 COMFORT
Klic
Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Naprodaj je rabljeni Hammer C3-31 štirikratni kombinirani stroj z dolžino reza 2100 mm. Stroj je v zelo dobrem stanju, strokovno osebje ga je pregledalo in obnovilo.
Tehnični podatki:
- Dolžina reza: 2000 mm
- Širina reza: 650 mm
- Višina reza: 103 mm
- 4 hitrosti rezkanja
- Preklopnik smeri vrtenja
- Hobelska gred s Hammer sistemskim nožem
- Dolžina ravnalne površine: 1400 mm
- 3 motorji po 3 kW
- Letnik: 2017
Stroj se nahaja v A-5431 Kuchl in si ga lahko ogledate kadarkoli v našem delovnem času. Vmesna prodaja pridržana!
Sorodni izrazi: kombinirani stroj, kombinirana naprava, skobelni stroj, debelinka, debelinski stroj, krožna žaga
Referenca: R-L08SV
Codsxxi Irepfx Afqoaa
mali oglas
Sierakowska Huta
932 km
Večnamenski stroj s 4 funkcijami
SCM
Klic
Stanje: zelo dobro (rabljeno), Catalogue number: 7211
TECHNICAL DATA
PLANER:
- Cutterhead width: 400 mm
- 3-knife cutterhead
- Table length: 2000 mm
- Fence included
THICKNESSER:
- Max workpiece thickness: 140 mm
- Cutterhead guard on thicknesser
From the top:
– Pawls
– Serrated feed roller
– Planer cutterhead
– Smooth outfeed roller
DRILLING UNIT:
- Max tool diameter: 16 mm
- Max drilling depth: 170 mm
- Max drilling width: 200 mm
- Table adjusted up/down, front/back and sideways
- Table dimensions: 560 x 270 mm
- Material clamp
CIRCULAR SAW:
- Max blade diameter: 300 mm
- Max cutting height: 80 mm
- Blade bore diameter: 30 mm
- Saw blade height adjustable
- Cutting width with fence: 120 mm
- Table dimensions: 1010 x 550 mm
- Included sliding carriage
- Motor: 2.2 kW
- Dimensions (L/W/H): 2000 x 2340 x 1200 mm
- Weight: 895 kg
ADVANTAGES
– Made in Italy
– Very good condition
Cjdjqwy Dtopfx Afqoaa
– Used multi-purpose machine
Net price: PLN 13,900
Net price: EUR 3,300
Net price calculated at an exchange rate of 4.2 PLN/EUR
(For significant exchange rate fluctuations, the price may change)
mali oglas
Siedlce
853 km
Večnamensko strojno orodje
CORMAKCMS 260
Klic
Stanje: novo, Leto izdelave: 2025, Universal 5-in-1 Multifunction Machine – CMS260 is a tool that has established its presence on the European market. We ensure that this machine fully complies with safety and technological regulations.
Below is a comprehensive overview of this machinery offering:
Advanced Technological Solutions: The CMS260 combines robust construction with high-tech software, making it suitable for a wide range of woodworking applications.
Compliance with Safety Standards: The machine meets all requirements under EU and Polish safety regulations, providing not only efficiency but, above all, safe operation.
Technical and Commissioning Documentation (DTR) in Polish: Comes with full technical documentation to facilitate operation and maintenance.
Genuine CE Declaration of Conformity: The CMS260 is furnished with an authentic CE conformity declaration issued by authorized certification bodies within the European Union, demonstrating compliance with European safety standards.
Multifunctionality in Compact Spaces: Despite its versatility, the machine performs efficiently even in confined areas thanks to its intelligent design and compact dimensions.
Precision Triple Knife Shaft and Aluminium Sliding Table: Features a triple HSS knife shaft and aluminium sliding table with a triangular guide, ensuring precision and power in every operation.
Three Motors for Maximum Performance: The CMS260 is equipped as standard with three motors, providing significant power, especially noticeable during heavy-duty operations.
Integrated Features for Easy Operation: Includes folding planer tables for faster changeover to thicknesser mode, tilting saw blade up to 45° with hand wheel adjustment, and a clear electrical control panel.
Folding Chip Extractor Hood and Stable Planing Fence: Integrated folding chip hood with 100 mm outlet and planing fence adjustable from 90° to 45°, optimizing workspace and safety.
DRILLING ATTACHMENT AVAILABLE AS AN OPTION (EXTRA COST)
Horizontal Mortiser:
Drilling and mortising are tasks that are easily mechanized thanks to:
- Height-adjustable drilling/mortising head
- Table adjustable along two axes
- Adjustable length stop
- Two lower clamps and one side clamp
Technical specifications:
Casdpfxov R Td Ee Afqoa
Circular Saw
Table size: 920x410 mm
Max. saw blade: 254mm
Saw blade spindle: 30mm
Saw blade speed (50 Hz): 4000 rpm
Saw blade tilt: 0°-45°
Max. cutting height at 45°: 63 mm
Max. cutting height at 90°: 78 mm
Motor power: 2.2kW / 400V
Planer / Thicknesser
Cutter head diameter: 70mm
Number of knives: 3
Cutter head speed: 5500 rpm
Feed rollers: 32 mm
Max. planing width: 260 mm
Max. planing depth: 3 mm
Planer fence tilt: 0–45°
Max. thicknessing width: 258 mm
Max. thicknessing height: 225 mm
Max. thicknessing depth: 4 mm
Feed rate: 7m/min
Motor power: 2.2kW / 400V
Main table size: 920x410 mm
Sliding table: 238x1320mm
Dust extraction port: 100mm
Spindle Moulder
Spindle: 30mm
Spindle speeds: 1400/4000/6000/9000 rpm
Spindle clamping length: 105mm
Max. spindle stroke: 110mm
Max. table opening: 160mm
Motor power: 1.5kW / 400V
Weight: 360kg
mali oglas
Naprawa
533 km
Skobeljno-debelilni stroj SCM MINI MAX FS
SCMminimax f 41es
Klic
Stanje: rabljeno, Debelinka:
Maksimalna širina skobljanja: 400 mm
Maksimalna višina skobljanja: 240 mm
Minimalna dolžina obdelovanca: 200 mm
Premer nožnega valja: 700 mm
Število nožev: 3
Število obratov nožnega valja: 5000 obr/min
Cedpfxsxwvqde Afqeaa
Ročni dvig delovne višine
Poravnalka:
Skupna dolžina miz: 1810 mm
Nastavljive mize
Zvočno dušena os nožev
Zaščita za os nožev
Odvzemni priključek: 2x120 mm
Nagibni paralelni prislon
Napajanje: 400 V
Moč motorja: 5 kW
Skupne dimenzije:
Dolžina: 2030 mm
Širina: 800 mm
Višina: 1160 mm
mali oglas
Ptení
403 km
Večglavni rezkar
JKSQMB623W-MBQ623W
Klic
Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, največja višina reza: 160 mm, največja širina rezanja: 230 mm, hitrost pomika os X: 36 m/min, skupna širina: 1.860 mm, skupna dolžina: 3.500 mm, skupna višina: 1.830 mm, število rezil rezkalnika: 4, moč: 47,25 kW (64,24 KM), Na prodaj je zmogljiv štiristranski skobeljni in profilirni stroj priznanega proizvajalca JKS & Trade Moravia s.r.o., model QMB623W – MBQ623W, kupljen nov leta 2021. Stroj je bil uporabljan zelo malo, le 2 leti, saj je bil prvotno kupljen za proizvodni projekt, ki pa ni bil realiziran.
Tehnične specifikacije:
Delovna širina: 18–230 mm
Delovna debelina: 10–160 mm
Cajdpfx Aoxup Ecefqsa
Hitrost pomika: 7–36 m/min (nastavljiva)
Premer orodja: 125 mm (max)
Napajanje: 400V / 50Hz / 3-fazni
Nameščena moč: 47,25 kW
Glavna varovalka: 100 A
Dimenzije stroja: 3500 × 1860 × 1830 mm
Teža: 6.000 kg
V skladu s CE standardom
Stroj je popolnoma delujoč, redno vzdrževan in ima originalno dokumentacijo, vključno z navodili za uporabo. Primeren je za natančno in učinkovito štiristransko profiliranje komponent iz masivnega lesa.
📍 Lokacija: Češka
Stroj je na voljo za takojšnji ogled in odpremo.
📩 Za ceno, podrobne fotografije ali dogovor o ogledu nas kontaktirajte.
mali oglas
Bitburg
758 km
Kombinirana žaga in rezalnik
Holzkraft / SCMST 3 Classic 23 - sofort verfügbar -
Klic
Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, ST 3 classic F 23 – Combined Saw and Spindle Moulder
Caedpfx Afecnwydoqoa
Featuring tilting saw blade, tilting spindle moulder, and anodized aluminium sliding table
Robust steel and cast iron construction
Large support surface and precise cast iron table
High-precision sliding table made of anodized aluminium (travel distance 2250 mm)
Large outrigger (900 x 600 mm) with extendable aluminium telescopic fence
Max. saw blade diameter 315 mm with scoring unit, tilting from 90° to 45°
Saw rip fence with fine adjustment
Stable saw unit and large, double trunnion spindle moulder unit ensure maximum stability, precision, smooth operation, and long service life
Solid and precise machine table made of stress-free cast iron
3 manually adjustable spindle speeds from 3,500 – 10,000 rpm
Spindle moulder with forward/reverse rotation
Standard arc-shaped spindle guard
Two 5.0 kW motors with high performance reserves
Cast Iron Spindle Moulder Unit
secured at the top on both sides
precision ball bearings at the top
close to the pivot point
four optimally graduated spindle speeds allow for sharpening of workpieces
Powerful Motors
Industrial motor, 100% duty cycle for continuous operation at full load
Scope of Delivery:
Arc-shaped spindle guard
Anodized aluminium sliding table
Aluminium fence jaws
Folding stops
Technical Data
Cast iron table dimensions: 1112 x 430 mm
Edging length: 2250 mm
Max. saw blade diameter with/without scorer: 315 mm
Max. cutting height at 90°/45°: 100/70 mm
Max. crosscut length: 2660 mm
Saw blade tilt: 90° - 45°
Cutting width: 900 mm
Speed: 4000 rpm
Table router: -
Spindle tilt: 90° - 45°
Useable spindle length: 100 mm
Max. tool diameter: 210 mm
Max. tenoning tool diameter: 275 mm
Max. tool diameter, retractable: 180 mm
Speeds: 3,500/7,000/10,000 rpm
General: -
Motor power 400 V/50 Hz/S6 40%: 2 x 5.0 kW (6.6 HP)
Weight: 470 kg
Extraction ports diameter: 2 x 120 mm
Saw blade guard extraction port diameter: 60 mm
Location: From stock, 54634 Bitburg
- Immediately available -
mali oglas
Kuchl
214 km
Kombinirani stroj
HAMMERC3-31
Klic
Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Naprodaj je rabljen Hammer C3-31 štirikratni kombinirani stroj z dolžino reza 1300 mm. Stroj je v zelo dobrem stanju, strokovno servisiran in pregledan s strani našega osebja.
Tehnični podatki:
- Dolžina reza: 1300 mm
Codpfxexxi Dto Afqeaa
- Širina reza: 650 mm
- Višina reza: 103 mm
- 4 hitrosti rezkanja
- Stikalo za smer vrtenja
- Silentpower spiralni rezkalni valj
- Dolžina poravnave: 1400 mm
- 3 motorji po 3 kW
- Leto izdelave: 2020
Stroj se nahaja v A-5431 Kuchl in si ga lahko ogledate kadarkoli v našem delovnem času. Pridržujemo si pravico do predhodne prodaje!
Sorodni izrazi: kombinirani stroj, kombinirana naprava, skobeljni stroj, debelinka, krožna žaga
Referenca: R-L0B8S
mali oglas
Juszczyn
530 km
Kombinirani stroj
Adolf3w1
Klic
Stanje: rabljeno, Multi-purpose Machine Adolf
1. Saw
2. Surface Planer
Planing width: 500 mm
Caodpsu E Icpofx Afqea
4-knife cutterblock
Table length: 195 cm
3. Mortiser/Drilling Machine
Machine weight: 750 kg
mali oglas
San Giovanni Al Natisone
125 km
Rezalnik za vrtanje z glavo
Balestrini
Klic
Stanje: rabljeno, Testa di fresatura per foratura marca Balestrini, modello 1.2.F, numero di serie 1120, usata.
Codpott E Swofx Afqeaa
mali oglas
Bitburg
758 km
Kombinirani stroji - takoj na voljo
Holzkraft SCMLAB 300 Plus F 16 Tersa
Klic
Stanje: novo, Leto izdelave: 2025, LAB 300 PLUS F 16 TERSA - Universal Combination Machine with Aluminum Sliding Table and Three Milling Speeds
for sawing, milling, surface & thickness planing, and optional slot mortising
Torsion-resistant steel and cast-iron frame
Machine table made of cast iron, hardened and ground
Smooth-running, anodized aluminum sliding table, 10-year warranty on guideways against wear
Large crosscut table with extendable aluminum telescopic fence and flip stops
Combination saw mitre fence with 45° quick adjustment
Max. saw blade diameter 315 mm with optional scoring unit, tiltable from 90° to 45°
Helical steel feed roller for uniform timber feed during thickness planing
Four manually adjustable spindle speeds
Standard reversible spindle rotation (clockwise and counterclockwise)
Three independent motors for each operating unit
Scope of delivery:
Combination planing/parallel fence
Curved guard hood for spindle moulder
Tersa cutter block
Anodized aluminium sliding table
Aluminum fence jaws
Flip stops
Eccentric hold-down arm
Model: LAB 300 PLUS F 16 Tersa
Article No.: 5500314
Technical Data
---Circular Saw---
Cutting length: 1600 mm
Max. saw blade diameter with scorer: 315 mm
Max. cutting height at 90° / 45°: 100/79 mm
Max. crosscut width left of blade: 1660 mm
Rip capacity at fence: 800 mm
Saw spindle speed: 3500 rpm
Saw blade tilt: 90° - 45°
---Surface Planer---
Working width: 300 mm
Planer table length: 1260 mm
Cutter block diameter / Number of knives: 72 mm / 3 pcs.
---Thickness Planer---
Table dimensions: 300 x 450 mm
Min./max. working height: 3 mm / 220 mm
Max. depth of cut: 4 mm
Feed speed: 7 m/min
Csdpfx Ajcnxa Nefqsaa
---Spindle Moulder---
Usable spindle length: 100 mm
Max. tool diameter, retractable: 180 mm
Max. tenoning tool diameter: 275 mm
Max. retractable tool diameter: 140 mm
Spindle speeds: 3500/6000/8000 rpm
Spindle diameter: 30 mm
Motor output 400 V / 50 Hz / S6 - 40%: 4 kW (5.5 HP) S6 40%
Weight: 430 kg
Extraction port diameter: 4 x 120 mm
Saw blade guard extraction port diameter: 60 mm
Sliding Table with Ball Contact System
Equipped with a proven ball contact system used millions of times
Permanently smooth operation through hardened and ground guideways
Not sensitive to dust and dirt due to minimal contact points between ball and rail
10-year Holzkraft warranty against wear on carbide guideways
Extraction Hose Connection
The extraction ports for the surface planer (1) and thickness planer (2) are aligned in the same direction. Therefore, the extraction hose can be attached from the same side for both planing operations. No need for a hose to go around the machine.
Planer Units
Helical steel feed rollers for continuous and uniform timber feed
Heavy-duty anti-kickback fingers prevent material kickback
3-knife cutter block ensures optimum planed finish
mali oglas
Kuchl
214 km
Kombinirani stroj
HammerB3 WINNER
Klic
Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, V prodaji je rabljena krožna žaga-freza Hammer B3Winner z dolžino reza 1300 mm. Stroj je v zelo dobrem stanju in ga je naše strokovno osebje pregledalo in obnovilo.
Tehnični podatki:
- Dolžina reza 1300 mm
- Širina reza 800 mm
- Višina reza 103 mm
- 4 hitrosti rezkanja
- stikalo za smer vrtenja
- možnost odsesavanja Ø 120 mm
- višinsko nastavljiv in nagiben
- 2 motorja po 3 kW
- Leto izdelave 2022
Caedexdxgzspfx Afqoa
Stroj se nahaja v A-5431 Kuchl in si ga lahko v času uradnih ur kadarkoli ogledate. Vmesna prodaja pridržana!
Sorodni pojmi: krožna žaga, freza, rezkalni stroj, kombiniran stroj, kombi stroj
Referenca: R-Y03O4
mali oglas
San Giovanni Al Natisone
125 km
SCM ST4 Kombinirana krožna žaga + rezkalni stroj
SCMST4
Klic
Stanje: rabljeno, SCM ST4 Circular Saw + Spindle Moulder
Casdpfx Afjqqu Aqsqoa
mali oglas
Bitburg
758 km
Kombinirana žaga z možnostjo nagibanja
Holzkraft / SCMMinimax st 3 c 16 - sofort verfügbar -
Klic
Stanje: novo, Leto izdelave: 2025, Combined Saw-Spindle Moulder
minimax st 3c F 16
Tilting saw blade, tilting spindle moulder, and format sliding table made from anodized aluminium
Robust steel and cast iron construction
Large support surface and precision-cast table
High-precision format sliding table made of anodized aluminium (travel distance 2250 mm)
Large crosscut frame (900 x 600 mm) with aluminium telescopic fence extendable up to 2660 mm with professional flip stops
Max. saw blade diameter 315 mm with scoring unit, tiltable from 90° - 45°
Saw rip fence with fine adjustment
Sturdy saw unit and large double trunnion spindle moulder unit ensures maximum stability, precision, smooth operation, and long service life
Solid and precise machine table made from stress-free cast iron
Three manually adjustable spindle speeds from 3500 - 10000 rpm
With forward and reverse spindle rotation
Standard arc milling guard
Casdpfehp Rdlex Afqoa
Safety reversing aluminium fence jaws
Two motors with high power reserves
Two removable handwheels for convenient and quick operation
Dimensions and Weights
Weight approx. 470 kg
Dust Extraction Connection
Dust extraction port diameter 2 x 120 mm
Saw blade guard dust extraction port diameter 60 mm
Electrical Data
Drive motor power 2 x 5.0 kW
Connection voltage 400 V
Mains frequency 50 Hz
Spindle Moulder
Spindle tilt 0 – -45 °
Usable spindle length 100 mm
Spindle speeds 3500/7000/10000 rpm
Max. cutter diameter
not retractable 210 mm
retractable 180 mm
tenoning 275 mm
Circular Saw Unit
Crosscut length 1600 mm
Cut width with rip fence 900 mm
Max. crosscut width left of saw blade 2660 mm
Saw blade tilt 90–45 °
Max. cutting height 90° 90 mm
Max. cutting height 45° 63 mm
Max. saw blade projection 90° 100 mm
Max. saw blade projection 45° 78 mm
Main saw blade diameter 315 mm
Main saw blade diameter explanation independent of scoring unit
Main saw blade speed 4000 rpm
Sliding Table and Table
Table length 1112 mm
Table width 430 mm
Scope of Delivery:
Arc milling guard
Anodized aluminium format sliding table
Aluminium fence jaws
Flip stops
Location: Ex stock 54634 Bitburg
- Immediately available -
mali oglas
Bitburg
758 km
Večkombinacija
SCM HolzkraftMinimax c 26 g Tersa - sofort verfügbar
Klic
Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, minimax c 26g TERSA – Multi-function combination machine for sawing, milling, planing and thicknessing.
The work tables are made from heavily ribbed grey cast iron and the frame is constructed from welded steel, ensuring outstanding torsional rigidity and vibration-free operation.
Unique in its class: smooth-running anodised aluminium sliding table with ball contact system.
Tilting saw blade from 90° to 45°.
Table extension with aluminium crosscut fence for panels and large workpieces.
Planer unit with TERSA quick-change system with three planer knives.
Helically-toothed steel infeed roller for constant feed when thickness planing.
Radius milling guard for profiling operations, standard with fine adjustment.
Milling unit with two speeds.
Three independent motors, one for each working unit.
Quality Made in Europe.
Equipment details
Aluminium sliding table
With proven ball contact system, used millions of times
Dust and dirt-resistant thanks to minimal contact area between ball and trapezoidal rail
Permanently smooth-running
Saw unit adjustment
Manual height and tilt adjustment of the saw unit via handwheel
Precise positioning using a scale
TERSA planer knife shaft
No more setting and screwing
Planer knife changes in seconds
Self-locking
Particularly low-noise
Spindle moulder
The milling unit features two speeds for flexible tooling options.
The machine is equipped with a finely adjustable radius milling guard for profiling. With the aluminium sliding table, tenoning operations are easily possible.
Thicknesser
With the powerful thicknessing feed, workpieces up to 200 mm height can be planed.
The helically toothed infeed roller guarantees consistent material feed.
The jointer table folds up space-savingly towards the inside of the machine.
Conversion from surface planer to thicknesser is completed within seconds by a single lever.
Surface planer
Standard with TERSA quick-change planer knife system
Large dimensioned planing tables
Planing and thicknessing tables made from grey cast iron guarantee maximum smooth running and vibration-free operation.
Saw unit
Saw tiltable up to 45°
With 250 mm diameter saw blade, max. 80 mm cutting height
Rip cuts up to 500 mm with parallel fence
Table extension
With angle scale and aluminium crosscut fence for mitre cuts on panels and large workpieces
Scope of delivery:
Tersa quick-change planer shaft
Anodised aluminium sliding table
Mitre fence with flip stop
Multi-function fence for rip and surface planing
Eccentric clamp arm
Model: minimax c 26g TERSA
Item no.: 5500027
Caedpfx Afodqzh Toqea
Cutting length: 1200 mm
Cutting width with parallel fence: 500 mm
Max. crosscut width left of saw blade: 1200 mm
Saw blade tilt: 90 - 45 degrees
Max. cutting height at 90°: 80 mm
Sliding table length: 1140 mm
Sliding table width: 201 mm
Sliding table height: 70 mm
Saw table length: 1024 mm
Saw table width: 224 mm
Saw table height: 900 mm
Planer shaft type: TERSA
Planer shaft diameter: 62 mm
Number of planer knives: 3 pcs
Jointer table width: 260 mm
Jointer table length: 1040 mm
Saw/jointer fence tilt angle: 90/45 degrees
Max. jointer depth of cut: 3 mm
Thickness table length: 450 mm
Thickness table width: 260 mm
Min. working height in thicknesser: 3 mm
Location: Ex stock 54634 Bitburg
- immediately available -
Znak zaupanja
Prodajalci, certificirani pri Machineseeker

mali oglas
Bitburg
758 km
4-komorni kombi s 4 oddelki -
SCM / Holzkraftminimax cu 410c F 26 N sofort verfügbar
Klic
Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Combination machine 4-in-1 HOLZKRAFT CU 410c F 26 N Tersa
Csdpod Dtc Tefx Afqeaa
-- Technical Specifications --
- Circular Saw -
Edging length: 2,600 mm
Max. saw blade diameter: 315 mm
Max. cutting height at 90°/45°: 100 / 79 mm
Max. crosscut width to the left of the saw blade: 2,310 mm
Rip capacity at parallel fence: 900 mm
Saw blade tilt: 90° - 45°
- Planer -
Working width: 410 mm
Planer table length: 1,660 mm
Cutterblock diameter / number of planer knives: 72 mm / 3 pcs
- Thicknesser -
Table dimensions: 410 x 605 mm
Min./max. working height: 3 / 230 mm
Max. chip removal: 4 mm
Feed speed: 7 m/min
- Spindle Moulder -
Usable spindle length: 100 mm
Max. tenoning tool diameter: 275 mm
Max. tool diameter: 210 mm
Spindle speed: 3,500 / 6,000 / 10,000 rpm
Spindle diameter: 30 mm
- General -
Motor power: 400 V / 50 Hz, 3 x 5.0 kW (6.6 HP)
Extraction port diameter: 4 x 120 mm
Extraction port diameter (saw blade guard): 60 mm
- Special Price -
Location: Ex stock 54634 Bitburg
mali oglas
Bitburg
758 km
Kombinirana žaga / rezalnik
SCM / HolzkraftMinimax St 5 es 32 - sofort verfügbar -
Klic
Stanje: novo, Leto izdelave: 2025, Holzkraft Minimax ST 5es – Maximum Specification for Professional Use
Saw-spindle moulder combination with mitre-cutting device and tilting spindle moulder
Item No.: 5501086
Ø 350 mm main saw blade with max. cutting height of 118 mm, achievable even with the scorer blade installed
Scoring unit with separate motor and Ø 120 mm blade, easy and precise adjustment from outside
Saw unit tiltable from 90° to -45°
High-precision sliding table made of anodised aluminium
Large outrigger table (1200 x 650 mm)
With material roller and extendable aluminium telescopic fence up to 3300 mm
Tilting spindle moulder from 90° to -45° backwards into the fence
Four spindle speeds
Spindle with reversible direction of rotation
Three independent motors
Equipped with lockable main switch and motor protection switch
Standard with separate parallel rip fence and jointer fence for edge jointing
Equipment Details:
Sliding Table with Ball Contact System
Made of anodised aluminium
Guides of hardened and ground steel, 15% harder than standard steel
Twin-trunnion Spindle Moulder Unit
Tiltable, made of grey cast iron
Mounting points directly to the table for optimal smooth operation
Spindle located high on precision ball bearings for lowest bearing load and maximum service life
Powerful industrial motors
Spindle Moulder Fence
Heavy-duty professional version
High-quality grey cast iron fence supplied as standard with fine adjustment
3-positioned stops for quick repeatability
Fine adjustment via rack and pinion, numeric display and aluminium fence jaws
Rip Fence
With fine adjustment and quick clamping
Stable round bar guide made from ground steel
Easily foldable for large workpiece cutting
Reversible aluminium fence ruler for narrow workpieces
Grey Cast Iron Twin-Trunnion Saw Unit
Height adjustment via dovetail guide
Extremely robust and torsion-resistant for precise cuts
Bearing close to saw blade on both sides
Height and angle tilting up to 45°
Scoring unit with separate 0.55 kW scorer motor as standard
Outrigger with angle-adjustable telescopic crosscut fence
with mitre scale
Dimensions & Weights
Approx. weight 900 kg
Dust Extraction Connection
Extraction port diameter 3 x 120 mm
Extraction port diameter blade guard 80 mm
Drive Power
Scorer Motor 0.55 kW
Main Motors 2 x 5.0 kW
Electrical Data
Voltage 400 V
Sliding Table and Table
Sliding table width 360 mm
Sliding table height 142 mm
Table length 1380 mm
Table width 465 mm
Spindle Moulder
Cajdpfx Aed Hx Hmofqsa
Spindle tilt 0 – -45°
Usable spindle length 125 mm
Spindle speeds 3500/6000/8000/10000 rpm
Max. Cutter Diameter
lowerable 240 mm
Tenoning 320 mm
Panel Saw Unit and Scorer
Cutting length 3200 mm
Cutting width with rip fence 900 mm
Max. crosscut width left of blade 3300 mm
Saw blade tilt 90 – 45°
Max. cutting height 90° 104 mm
Max. cutting height 45° 68 mm
Location: Ex stock 54634 Bitburg
- available immediately -
mali oglas
Bitburg
758 km
4-kratni kombinirani stroj
HolzkraftCU 300 Classic F 23
Klic
Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Combination Machine 4-in-1 HOLZKRAFT CU 300 Classic F 23 N
-- Technical Data --
- Circular Saw -
Cutting length: 2,250 mm
Max. saw blade diameter: 315 mm
Max. cutting height at 90°/45°: 103 / 82 mm
Max. crosscut width left of saw blade: 2,310 mm
Rip capacity at parallel fence: 820 mm
Saw blade tilt: 90° - 45°
- Planer -
Working width: 300 mm
Planer table length: 1,510 mm
Cutter block diameter / number of knives: 72 mm / 3 pcs.
- Thicknesser -
Table dimensions: 300 x 585 mm
Min./Max. working height: 3 / 230 mm
Max. chip removal: 4 mm
Feed speed: 7 m/min
- Spindle Moulder -
Usable spindle length: 100 mm
Max. tenoning tool diameter: 275 mm
Cjdpfoci Tvhox Afqoaa
Max. cutter diameter: 210 mm
Spindle speed: 3,500 / 7,000 / 10,000 rpm
Spindle diameter: 30 mm
- General -
Motor power: 400 V / 50 Hz, 3 x 5.0 kW (6.6 HP)
Extraction port diameter: 4 x 120 mm
Saw blade guard extraction port diameter: 60 mm
- Special Offer Price -
Location: Ex stock 54634 Bitburg
mali oglas
Bitburg
758 km
Kombinirani večnamenski kombinirani
Holzkraftminimax cu 410e 27 TERSA - verfügbar
Klic
Stanje: novo, Leto izdelave: 2025, For sawing, milling, surface and thickness planing, and optionally mortising, in the smallest of spaces
High-precision sliding table made of anodized aluminum, various lengths available
Large outrigger (1200 x 650 mm) with material roller and extendable aluminum telescopic fence up to max. 3200 mm with professional flip stops
Max. saw blade diameter 315 mm, tiltable from 90° to -45°
Large spindle moulder swivel range from 90° to -45° to the rear
Four spindle speeds up to 10,000 rpm, manually adjustable
With spindle moulder reverse operation
Strongly ribbed surface planing tables made of stress-relieved cast iron for decades of stability and flatness
Two-speed feed for thickness planing
Three independent industrial motors for continuous operation
With lockable main switch and motor protection switch
Fixed handwheels
Dimensions and weights
Weight (net) approx. 857 kg
Surface planer
Surface table width: 410 mm
Surface table length: 2000 mm
Max. planing depth, surface: 5 mm
Extraction connection
Extraction port diameter: 3 x 120 mm
Casdpfxeih Dxls Afqja
Saw blade guard extraction port diameter: 60 mm
Installation information
Space requirement length: 5960 mm
Space requirement width/depth: 5140 mm
Space requirement explanation: Dimensions consider maximum travel or working length.
Working area length: 1600 mm
Working area width/depth: 1600 mm
Working area explanation: Please add specified dimensions to the space requirement to obtain the recommended installation area for the machine.
Thickness planer
Thickness table length: 757 mm
Thickness table width: 423 mm
Working thickness min.: 3 mm
Working thickness max.: 230 mm
Max. planing depth, thickness: 5 mm
Electrical data
Connection voltage: 400 V
Line frequency: 50 Hz
Rated operation mode drive motor: S6
Duty cycle drive motor: 40%
Power output drive motor: 3 x 5.0 kW
Sliding table and worktable
Sliding table length: 2660 mm
Sliding table width: 360 mm
Sliding table height: 142 mm
Worktable length: 1250 mm
Worktable width: 430 mm
Worktable height: 900 mm
Spindle moulder
Spindle tilt: 0 to -45°
Spindle shaft diameter: 30 mm
Usable spindle length: 125 mm
Spindle speeds: 3500/6000/8000/10000 rpm
Max. milling tool diameter:
Max. tool diameter, retractable: 210 mm
Max. tool diameter, retractable at 45°: 150 mm
Max. tool diameter, tenoning: 275 mm
Cutterhead
Cutterhead type: TERSA
Cutterhead diameter: 87 mm
Number of knives: 4
Cutterhead speed: 5200 rpm
Panel saw unit
Rip length: 2600 mm
Cutting width with parallel fence: 900 mm
Max. crosscut width left of blade: 3260 mm
Saw blade tilt: 90–45°
Max. cutting height at 90°: 90 mm
Max. cutting height at 45°: 63 mm
Max. saw blade projection 90°: 100 mm
Max. saw blade projection 45°: 71 mm
(Main) saw blade diameter: 315 mm
(Main) saw blade diameter explanation: with scoring blade
(Main) saw blade speed: 4000 rpm
Feed
Feed speed: 6–12 m/min
Location: ex stock 54634 Bitburg
- immediately available -
Olajšamo vam iskanje
Nove ponudbe prejmete takoj in brezplačno po e-pošti.
Iskalno nalogo lahko kadar koli preprosto končate.
Rabljeni kombinirani stroji (102)
Zdaj preiščite celoten Machineseeker z več kot 200.000 rabljenimi stroji.Brskajte po najbolj priljubljenih poimenovanjih strojev:
- 5 X Kombinacija Stroj
- Blok Ki Stroj
- Da Stroj
- Id 5005
- Kombinirani Stroji
- Kombinirka 5 Operacij
- Kombinirka Za Les
- Kombinirke Za Les
- Les Stroj Za Skobljanje



















































































































































































































