Stanje: zelo dobro (rabljeno), Leto izdelave: 1995, Tilting spindle moulder with long work tables and feed unit Motor power: 5.5 kW, 400 V, 50 Hz Spindle speeds: 3,500/ 4,500/ 6,000/ 8,000/ 10,000 rpm with digital display Usable spindle height: 180 mm Vertical spindle travel: 155 mm Interchangeable spindle MK 5 Ø 30 mm Spindle tilting range: +45° / -10° Spindle height adjustment electrically controlled with digital display Spindle angle adjustment electrically controlled with digital display Fence adjustment manually with fine adjustment Spindle has forward and reverse rotation CE compliant Extraction connection: 2 x 120 mm Working height: 860 mm Includes: - Curved moulding fence - Interchangeable spindle MK 5 Ø 25 mm - Interchangeable spindle MK 5 Ø 50 mm Dimensions (L x W x H): approx. 2650 x 1250 x 1700 mm Weight: approx. 1000 kg HOLZHER feed unit - 3 rollers - 8 speeds Note on used machinery: • Technical data subject to errors and prior sale. • All prices quoted are ex works - loaded free of charge! • Machines have been cleaned and function tested. • All machines are sold as seen, without any warranty claims. Duodoyynptepfx Aplet Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (We only respond to enquiries that include your address and telephone number!)

Stanje: novo, Clean air extraction / dust extractor Dust tested to H3 standard, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with minimal space requirements Maximum output in this class Very quiet operation Designed for commercial use Sturdy and compact housing made of galvanized sheet steel Extraction port easily convertible from left to right, offering flexible use Large maintenance openings Large, mobile chip containers with clamping bracket and chip collection bag Dust extractor is delivered fully assembled, ready for immediate use All models are mobile Filter material made from polyester fleece, aluminum-coated for long service life Filters are antistatic as standard, certified and approved according to Category M-BIA Dujdor A Eq Rspfx Aplst The fan is installed downstream of the filter Extraction motor energy efficiency class: IE3 Nominal airflow: 1,448 m³/h Nominal negative pressure: 2,242 Pa Drive motor power: 2.2 kW, 400 V, 50 Hz Chip collection volume: 2 x 165 l Outer diameter of extraction inlet: 160 mm Filter surface area: 9.21 m² Residual dust content: < 0.1 mg/m³ Maximum sound pressure level: 73 dB(A) Dimensions (L x W x H): approx. 1,618 x 830 x 1,653 mm Weight: approx. 268 kg PM VERSION Automatic filter cleaning with pneumatic system, operating a wiper frame

Stanje: novo, Leto izdelave: 2023, Robust steel grey cast iron construction Milling spindle can be tilted backwards from 0° to -45° Forward and reverse rotation of the milling spindle Large-sized milling unit made of grey cast iron, mounted directly to the table Solid and precise cast iron table Standard swing-type milling guard Aluminium sliding table with ball contact system Torsion-resistant, highly precise, smooth-running, and reliable in daily operation 10-year SCM warranty against wear on the guideways Milling spindle supported at the top with precision ball bearings for minimal bearing load and maximum service life Precise milling fence with rapid adjustment and fine adjustment with scale at the fence jaw Integrated extraction port Large milling table opening enables use of larger tooling Weight approx. 290 kg Extraction connection diameter 2 x 120 mm Work table L x W = 1000 x 435 mm Table height 900 mm Sliding table length 1000 mm Sliding table width 270 mm Drive motor power 5.0 kW, 400 V, 50 Hz Milling spindle tilt 0° to -45° Usable spindle length 100 mm Maximum table overhang 130 mm Spindle speeds 3500/7000/10000 rpm Spindle diameter 30 mm Dodpfjiknp Rox Aplsut Maximum retractable tool diameter 180 mm

Stanje: novo, The manual milling machine Omec 650-M is suitable for the production of dovetails on drawers and all types of furniture parts. The machine is equipped with a spindle unit with a milling cutter, allowing the machining of dovetails with different heights. The machine can produce four types of dovetail joints with various pitches. Clamping and releasing of workpieces is carried out manually via eccentric shafts. Operation (On/Off) is performed via an overload relay on the motor terminal board and handwheels with levers mounted on the sides of the machine. Djdpfxjdcdwbs Apljut The machine is built in accordance with CE standards. Technical data: Connection power: 0.75 kW, 400 V, 50 Hz Number of spindles: 1 Spindle speed: 16,500 rpm Standard dovetail pitch spacing: 25 / 40 / 50 / 60 mm Machine weight: 100 kg Space requirement (L x W x H): 450 x 540 x 1420 mm Workpiece dimensions: Workpiece length: 200 – 1500 mm Workpiece width: 60 – 280 mm Dovetail height: 5 – 18 mm Workpiece thickness: 7 – 45 mm The machine comes as standard with the following parts: - Eccentric HSS milling cutter mounted on the machine - Set of tools for machine adjustment and maintenance - Operating manual.

Stanje: novo, Work table dimensions: 2500 x 780 mm Milling spindle diameter: 30 mm Swivel range of the milling spindle: +/- 45.50° Clamping length of the spindle: 140 mm Max. tool diameter under the table: 300 x 80 mm Spindle base overhang from table: 50 mm Duodpfx Aed Etkhjpljt Extraction port diameter: 1 x 120 & 2 x 100 mm Electrospindle motor power: 7.50 kW Electrospindle with inverter for speeds from 900 to 12,000 rpm Swiveling control panel with "Easy Touch 7" electronic control "Flex" milling fence with automatic adjustment via electronic control Spindle forward/reverse operation Extendable table support at the front INCLUDES OPTIONS: - "Fast" table insert with automatic adjustment via 'Easy' control - "LL" version with 2 cast iron table extensions, total length 2500 mm Note on used machines: • Technical data and prior sale subject to change and errors. • Quoted prices are ex-works, loaded free on truck. • The machines have been cleaned and function tested. • All machines are sold as inspected, without any warranty claims. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid if made in writing. (We only respond to inquiries with your full address and telephone number!)

Stanje: dober (rabljeno), Naprodaj je rabljeni rezkalni stroj Panhans Tip-245 z 8 hitrostmi rezkanja. Stroj je bil strokovno pregledan in obnovljen ter je v dobrem stanju. Tehnični podatki: - dvojna nagibna enota - nagibni razpon -45° do +45° - električno nastavljiva višina in nagib - nadglavna upravljalna plošča Dsdpfoy Nncfex Aplout - 8 rezkalnih hitrosti - stikalo za smer vrtenja - moč motorja 11 kW / 15 KM - letnik 2002 Stroj se nahaja v A-5431 Kuchl in ga je mogoče kadarkoli ogledati v času naših delovnih ur. Predhodna prodaja pridržana! Sorodni pojmi: rezkalnik, rezkalni stroj, rezkanje Referenca: R-S1632

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, moč: 7,5 kW (10,20 KM), vrsta nastavitve višine: električni, Tilting Spindle Moulder HOFMANN TFS 107 Standard Equipment: - 7.5 kW motor, 400 V, 50 Hz - Table size 1,200 x 815 mm, heavily ribbed cast iron table, with table rings - Electronic soft start and brake device - Electric height and tilt adjustment for rapid and fine feed, accurate to 0.1 mm, height adjustment approx. 145 mm - Tilt adjustment +/- 45.5° - 4 spindle speeds: 3,000 / 4,500 / 6,000 / 9,000 rpm - Milling fence, type 2601 Efficient, with multiplex fence jaws - Fixed spindle, Ø 30 mm with quick-release nut "fix" - Forward/reverse rotation, machine socket, arc guard type TAPOA, Hofmann "Centrex" - Paint finish: grey white/signal blue Electrical connection: Motor power: 7.5 kW – Minimum fuse (A): slow 30 Additional equipment installed on this machine: - Table size 2,000 x 815 mm with extendable support (480 mm extension) instead of standard table - Infinitely variable spindle speed control for TFS 107 from 1,500 to 10,000 rpm incl. 7.5 kW motor (replacing standard soft start motor) - HOFMANN spindle fence type 2620 instead of standard fence 2601 Efficient. Total adjustment via handwheel with display, including switchover to tooling zero point. Digital display for individual fence jaw adjustment. Includes quick-release system for fence jaws - 2 cast iron fence jaws, 500/500 mm - Guide rails and rebate board, consisting of 5 rulers, 1 rebate board, 10 guide pads - Raised control panel - Tool compartment for TFS 107 (only possible with raised control panel) Djdeu Nz Ndopfx Apljut - Operating manual TFS 107, German

Stanje: rabljeno, Balestrini TTSA Dvojna, avtomatska čepilna stroj Dodpfx Apey Nbp Solout

Leto izdelave: 2021, stanje: novo, Funkcionalnost: popolnoma funkcionalen, Na prodaj je rabljeni lesnoobdelovalni rezkalni stroj Felder F-900 Z z mizno za čepanje in rezkanje utorov (dolžina 1300 mm). Stroj ni bil uporabljen in je v stanju novega. Tehnični podatki: - 5 rezkalnih hitrosti Dsdey Iyvnopfx Apljut - Rezkalna vretena nagibna od 90° do 45° - Rezkalni naslon za orodja do Ø 230 mm - Večkratni nastavitveni sistem - Miza za rezanje navojev in utorov 1300 mm - Električno nastavljiv po višini in nagibu pogon "PowerDrive" - Moč motorja 7,3 kW, SD zagon

Stanje: dober (rabljeno), Leto izdelave: 1982, Funkcionalnost: popolnoma funkcionalen, Dimenzije mize: 1400 x 1000 mm Miza se vrti od 0 do 360 stopinj Vreteno: ISO40 Nagibno vreteno Minimalna hitrost vrtenja vretena: 90 1/min Maksimalna hitrost vrtenja vretena: 2880 1/min Višina stroja: 3260 mm Dolžina stroja: 2650 mm Širina stroja: 2600 mm Teža stroja: 5100 kg Dodatna oprema, oprema: Dsdpfjy Iwf Hex Apljut - Vgrajena rotacijska miza - Hitri pomiki - Motorizirana nastavitev višine - Strojna svetilka Stroj je v zelo dobrem stanju.

Leto izdelave: 2005, stanje: rabljeno, Used machine Year of manufacture: 2005 Equipment and technical data: - Log House Milling Machine BL100A – Four-Head Unit - For producing chalet corner joints via milling on four sides of the log beam in a single setup, using 2 × vertical and 2 × horizontal milling spindles - Processing dimensions: 140 × 200 mm - Milling spindles: Ø 30 mm - Cutter: max. 4 × 220 × 100 mm - Motor power: 4 × 3.0 kW - Speed: 4,200 rpm - Feed: hydropneumatic, infinitely variable, with rapid traverse - Operation: two-hand control / via PLC control system - Milling depth adjustment: spindle with digital counter - Workpiece clamping: 2 × vertically pneumatic - Extraction: underfloor collection funnel Ø 160 mm - Equipment: complete with electrical system, PLC control, and pneumatics - Machine frame: prepared for end tenoning unit, drilling device, and crosscut saw - Machine guarding: closed design, hinged protective hood (gas spring) with viewing window - Control cabinet: on pedestal with 3.0 m cable conduit - Delivery condition: ready for operation, without tools - Horizontal clamps in machine table: 2 pcs - Operation: pneumatically from the front - Clamping cycle: automatic via PLC control - End tenoning unit integrated - Milling spindle: Ø 30 mm - Cutter: max. 180 × 40 mm - Motor power: 3.0 kW - Speed: 4,200 rpm - Feed: hydropneumatic, infinitely variable, with rapid traverse - Height adjustment: spindle with digital counter - Workpiece clamping: 1 × additional vertical pneumatic Dodpfx Apsyxyanolout - Equipment: integrated, with electrical system and pneumatics, without cutter - Horizontal drilling device integrated with drill guide and splinter guard - Drill diameter: max. 30 mm - Motor power: 1.1 kW - Speed: 1,500 rpm - Feed: pneumatic, infinitely variable, with rapid traverse for idle stroke - Height adjustment: spindle with digital counter - Workpiece clamping: 1 × additional vertical pneumatic - Equipment: integrated, with electrical system and pneumatics, incl. Ø 20 mm drill bit - Under-table crosscut circular saw integrated (automatic mode only) - Max. cutting dimension: 200 × 140 mm (W × H) - Saw blade diameter: 500 mm - Motor power: 4.0 kW - Cutting speed: 86 m/s - Feed: pneumatic - Workpiece clamping: pneumatic - Extraction: extraction funnel Ø 120 mm - Equipment: integrated, with electrical system and pneumatics, incl. saw blade - Prepared for automatic operation - Sliding table: mechanics, pneumatics and electrics for end tenoning unit - Interface: electrical for external Tigerstop control - Infeed table length: 9,000 mm - Outfeed table length: 4,000 mm Availability: short notice Location: Röllbach

Stanje: rabljeno, Leto izdelave: 1980, za obdelavo aluminija, plastike in jekla Območje rezkanja 100 x 250 mm Trifazni motor 1 KM 12.000 obr/min 380 V Skladišče: Nattheim Djdpfx Apjw Ulcxslout

Stanje: rabljeno, Leto izdelave: 1994, 1994 Bacci FCH8 dvovretenski rezkar s 4 glavami na vsaki strani (3 za rezkanje in 1 za brušenje) Mere: 7,20 x 2,40 x 1,90 m Približna teža: 5 ton Dsdpsx Hwmbsfx Aplout

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, Rezkar SAC 2.000 eur Set 20 catters tool 2.000 eur Dodpjx Av Aqefx Apleut

Stanje: dober (rabljeno), Kód: 0375 Znamka: GREDA Model: CFL 4 - CE standard Dsdpfxey Iwvrj Aplsut Konturirni, rezkalni in brusilni stroj za obdelavo dveh nasprotnih strani lesenega kosa, kot so stoli, naslanjači, sedežne garniture, puškini ročaji in drugo – CE standard. Tehnični podatki: - Št. rezkalnih enot: 2 - Št. rezkalnih in brusilnih enot: 2 - Št. motorjev: 4 × 7,5 Hp - Obrat v nasprotno smer: 4× - Maksimalna obdelovalna dolžina: 2500 mm - Maksimalna obdelovalna višina: 180 mm - Minimalna/maksimalna obdelovalna širina: 20/320 mm - Premer vretena rezkalne enote: 35 mm - Maksimalne dimenzije rezkalnega orodja: premer 160 mm, višina 180 mm - Premik vozička: 30 m/min - Povratek vozička: 30 m/min - Samodejno upočasnjevanje mize pri zaustavitvah - Dolžina brusnega traku: 2500 mm - Avtomatski pozicioner - Število nastavljivih pritisnih elementov: 6 - Skupna instalirana moč: 36 Hp - Komprimiran zrak: 6 bar - Skupne dimenzije (mm): 6700 × 2200 × 1800 (v) - Teža: 3600 kg

Stanje: rabljeno, Leto izdelave: 2003, Maszyna używana Rok produkcji: 2003 Wyposażenie i dane techniczne: - Automatyczna regulacja wysokości i kąta wrzeciona z impulsami dziesiętnymi - Mechaniczny wskaźnik wysokości wrzeciona i elektroniczny wskaźnik kąta nachylenia - Pokrywa odchylana z prowadnicami aluminiowymi - Regulowany otwór stołu za pomocą przesuwnego elementu blatu - System szybkiej wymiany narzędzi - Długie stoły z wysuwnym podparciem elementu obrabianego - Wymiary stołu: 2500 x 780 mm - Regulacja wrzeciona: od -45° do +45° - Średnica wrzeciona: 30 mm - Skok wrzeciona: 230 mm - Maks. otwarcie stołu: 300 mm - Silnik: 5,5 kW z automatycznym rozruchem gwiazda-trójkąt - Prawo-lewoskrętnie - Prędkości obrotowe: 3000/4500/6000/8000/10000 obr./min - Elektroniczne programowanie wysokości wrzeciona, kąta nachylenia wrzeciona oraz pozycji przykładnicy (przykładnica frezarska) - Odsysanie górne i dolne: 120 mm Wymiary: 2570 x 1450 mm Djdsw I H Rqopfx Apleut Waga: ok. 670 kg Dostępność: od zaraz Lokalizacja: Röllbach

Stanje: rabljeno, Leto izdelave: 1989, Rabljeni stroj Leto izdelave: 1989 Oprema in tehnični podatki: Velikost mize: 2000 x 880 mm (enodelna litoželezna miza) z izvlečnim okvirjem za oporo Pogon z motorjem s preklopom polov: 5/6 kW Vrtljaji vretena: 3000/4500/6000/9000 obr./min Nastavitev višine vretena rezkalnega stroja: 110 mm Duodpoy Ih Thefx Aplet Nastavitev naklona vretena rezkalnega stroja: 45° s 3-valjnim podajalnikom Holz Her Razpoložljivost: takoj Lokacija: 63934 Röllbach

Stanje: rabljeno, Leto izdelave: 1995, Used machine Year of manufacture: 1995 Equipment and Technical Data: Versatile copy router with extremely short setup times, both when switching from manual operations to automatic operations, as well as when changing between various automatic machining processes. The automatic template feed (consisting of a central copying roller and a pressure roller) was developed by SCM to automatically guide workpieces attached to a template past the milling tool. The automatic copying roller and pressure roller can be removed in seconds, making the machine available for single and custom manual production. Distance between tool axis and column: 915 mm Spindle stroke: 105 mm Table stroke: 180 mm Duodpsy Ih S Refx Aplot Maximum clearance between table and spindle: 300 mm Tool holder: MK 2 Spindle speed: 10,000/20,000 rpm Table dimensions with extensions: 1510 x 1170 mm Motor power: 4 kW Template feed motor power: 0.14 kW Template feed speed: 1.5–12 m/min Number of adjustable turret depth stops: 6 Dimensions approx.: 1690 x1100 x 1890 mm Weight: 650 kg Availability: short-term Location: 63934 Röllbach

Stanje: rabljeno, Leto izdelave: 1996, Rabljeni stroj Letnik izdelave: 1996 Oprema in tehnični podatki: - Osnovno načelo strojev Hofmann je preverjena izvedba iz litega železa - Sivo lito železo je daleč najboljše pri dušenju vibracij, tlačni trdnosti in nosilnosti - Vreteno za rezkanje 30 mm z desnim in levim tekom - Prislon za rezkanje z nastavkom prislona in centralnim nastavljanjem ter enostranskim finim nastavljanjem prislona - Ročno nastavljanje višine z digitalnim prikazom in tipko za ponastavitev - Velikost mize: 1200 x 820 mm - Višina mize: 890 mm - Moč motorja: 5,0/6,2 kW - Hitrosti vretena: 3000/4000/5000/6000/8000/10000 o/min - Nastavljanje višine: 125 mm - Priključek za odsesovanje ostružkov: 110/120 mm - Z dvovaljnim podajalnikom Her 2 za les Teža: 850 kg Razpoložljivost: po dogovoru Dodpfx Apswwxzholout Lokacija skladišča: 63934 Röllbach

Stanje: rabljeno, Leto izdelave: 2000, Rabljeni stroj Letnik izdelave 2000 T 110 je mizna rezkalka SCM, kjer sta kakovost in ugodna nabavna cena optimalno združeni. Zgradba je izjemno stabilna. Dodpfx Asy Ih Tuspleut Za udobno upravljanje so vsi upravljalni elementi nameščeni v dosegu na sprednji strani stroja. Natančna nastavitev višine orodja je zagotovljena z mehanskim prikazovalnikom. Nagib vretena od -5 do +45 stopinj. Velikost mize 1000 x 750 mm. Vpenjalna dolžina vretena 140 mm. Previs vretena nad mizo 20 mm. Hitrosti vretena 3000-4500-6000-9000-10000 obr/min. Maks. premer orodja, ki se lahko spusti pod mizo: 320 x 40 mm. Profilirno orodje maks. 250 mm. Motor 4 kW. Izvlečni priključek 120 mm. S 3-kolutnim podajalnikom. Teža 520 kg Razpoložljivost: takoj Lokacija skladišča: Röllbach

Stanje: rabljeno, Used Machine Features and Technical Data: Versatile copy router with extremely short setup times, both when switching from manual operations to automatic processes and when changing between various automatic machining operations. The automatic template feed (consisting of a central copying roller and a pressure roller) was developed by SCM to automatically guide workpieces attached to a template past the milling tool. The automatic copying roller and pressure roller can be removed within seconds, freeing up the machine for custom and manual one-off productions. Distance between tool spindle and column: 915 mm Spindle stroke: 105 mm Table stroke: 180 mm Max. clearance between table and spindle: 300 mm Tool holder: MK 2 Spindle speeds: 10,000 / 20,000 rpm Table dimensions with extensions: 1510 x 1170 mm Dusdpfjy Ih S Dsx Aplst Motor power: 4 kW Template feed motor power: 0.14 kW Template feed speed: 1.5 - 12 m/min Number of adjustable turret depth stops: 6 Approximate dimensions: 1690 x 1100 x 1890 mm Weight: 650 kg Availability: short notice Location: 63934 Röllbach

Stanje: rabljeno, Leto izdelave: 1994, Motor 6 / 7,5 kW s 4-valjnim podajalnikom, fiksne podajalne hitrosti. Razširitve hitrosti. Višina delovne mize: 920 mm. Nagib vretena: -10° do +45°. Največji izteg vretena nad mizo: 175 mm. Hitrosti vretena: 3250/6500-5000/10000 obr/min. Največji premer orodja: 250 mm. Teža: ca. 950 kg. Lokacija skladišča: Nattheim. Dodpfx Aew Enw Ijplsut

Stanje: rabljeno, Leto izdelave: 1978, Swivelling spindle: Yes, 0 - 45° Height adjustment: Handwheel Swivel adjustment: Handwheel Cutter jaw adjustment: manual Height display: - Swivel angle display: Scale Fence scale display: Scale Spindle diameter: 30 mm Speeds: 3000, 4500, 6000, 9000 rpm Motor power: 5 kW Dujdouzkxfopfx Aplst Motor brake: Yes, foot brake Extraction port: 2 x 100 mm Machine length: 1200 mm Machine depth: 1400 mm Weight: 800 kg

Stanje: rabljeno, Leto izdelave: 1999, Spindle tiltable: Yes, -5 to 45° Height adjustment: electric Tilting adjustment: electric Fence adjustment: manual Height display: scale Tilting angle display: scale Milling fence position display: scale Spindle diameter: 30 mm Speeds: 1500, 2250, 3000, 4000, 5000, 3000, 4500, 6000, 8000, 10000 rpm Motor power: 7.5 kW Motor brake: Yes, automatic Extraction connection: 2 x 120 mm Machine length: 2400 mm Machine width: 1400 mm Weight: 1100 kg Duedpeiixxcofx Aplet

Stanje: rabljeno, Leto izdelave: 1997, Vreteno z možnostjo nagiba: Da, od -5 do 45° Nastavitev višine: električna Nastavitev nagiba: električna Odpiranje mize: električno Nastavitev prislona: ročna Prikaz višine: digitalni Prikaz kota nagiba: digitalni Prikaz rezkalnega prislona: digitalni Premer vretena: 30 mm Število obratov: 3000, 4500, 6000, 9000 Priključna moč: 5 / 6 kW Motorna zavora: Da, avtomatska Priključek za odsesavanje: 2 x 120 mm Dolžina stroja: 2500 mm Dedpoy Hqd Hofx Aplout Širina stroja: 1400 mm Teža: 1100 kg