Zasukalni vretenasti rezkalni stroj nakup rabljenega (60)

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, vrsta nastavitve višine: električni, moč: 7,5 kW (10,20 KM), Tilting Spindle Moulder HOFMANN TFS 107 Standard Equipment: - 7.5 kW motor, 400 V, 50 Hz Hedpeu Nz Ndofx Ah Donu - Table size 1,200 x 815 mm, heavily ribbed cast iron table, with table rings - Electronic soft start and brake device - Electric height and tilt adjustment for rapid and fine feed, accurate to 0.1 mm, height adjustment approx. 145 mm - Tilt adjustment +/- 45.5° - 4 spindle speeds: 3,000 / 4,500 / 6,000 / 9,000 rpm - Milling fence, type 2601 Efficient, with multiplex fence jaws - Fixed spindle, Ø 30 mm with quick-release nut "fix" - Forward/reverse rotation, machine socket, arc guard type TAPOA, Hofmann "Centrex" - Paint finish: grey white/signal blue Electrical connection: Motor power: 7.5 kW – Minimum fuse (A): slow 30 Additional equipment installed on this machine: - Table size 2,000 x 815 mm with extendable support (480 mm extension) instead of standard table - Infinitely variable spindle speed control for TFS 107 from 1,500 to 10,000 rpm incl. 7.5 kW motor (replacing standard soft start motor) - HOFMANN spindle fence type 2620 instead of standard fence 2601 Efficient. Total adjustment via handwheel with display, including switchover to tooling zero point. Digital display for individual fence jaw adjustment. Includes quick-release system for fence jaws - 2 cast iron fence jaws, 500/500 mm - Guide rails and rebate board, consisting of 5 rulers, 1 rebate board, 10 guide pads - Raised control panel - Tool compartment for TFS 107 (only possible with raised control panel) - Operating manual TFS 107, German

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, moč: 7,35 kW (9,99 KM), premer vretena: 30 mm, vrtilni razpon: 46 °, vhodna napetost: 400 V, vrtljajska hitrost (min.): 1.000 obr/min, največja hitrost vrtenja: 18.000 obr/min, vhodna frekvenca: 50 Hz, The new profil 92 M e-motion spindle moulder is the Format4 premium model designed for maximum operating comfort and guarantees absolute efficiency with minimal setup times during milling operations. The advanced electrospindle features an HSK 63F interface for a pneumatic tool quick-change system. The swiveling range of ±46° allows for unlimited processing versatility. With the self-explanatory e-motion control via the 15" touchscreen operating panel, spindle speed, spindle height and angle, as well as fence adjustment and even the table opening, can be set intuitively and precisely. Memory slots for tools, spindles, and milling programs ensure perfect repeat accuracy and the shortest setup times. Controlled, eccentric supporting rings provide maximum table support area and significantly reduce adjustment effort, particularly during spindle swiveling. The newly developed, heavy-duty precision milling fence features two controlled axes for precise depth adjustment of the entire fence and an additional, independent depth positioning of the right (infeed) jaw. For comfortable access during curved milling operations, the fence can be completely swung away from the working area. Optionally, the Format4 profil 92 M e-motion can also be equipped with an electrically height-adjustable feed unit. Hnodpfjwztr Nex Ah Dsu Further technical data: Tool diameter: max. 250 mm Usable spindle height: 140 mm Height adjustment: electric Optional equipment: 12 Potential-free contact 106 HSK 63F milling spindle Ø 30 mm, 140 mm 118 650 mm "Integral" safety rulers 119 Table opening 255 mm with controlled eccentric supporting rings 183 Table extension on both sides 670 mm with 2200 mm pull-out frame 213 Electrically height-adjustable feeder support incl. horizontal tube 220 Parts list holder with A9 clipboard Benefits: - Highly efficient electrospindle with stepless speed control and HSK 63F interface - Positioning control for milling height and angle +/–46º - Positioning control for milling fence with offset - Smartouch with intuitive e-motion control system - Table opening with controlled eccentric supporting rings (option) - Electric height adjustment for feeder unit on overhead column (option) Additional information: - The electrospindle is equipped with an HSK F63 quick-change system - Clamping range: 2–25 mm for OZ25 collets - "Integral" safety rulers: 650 mm - Table extension on both sides 670 mm with 2200 mm pull-out frame - Table opening 255 mm with controlled eccentric supporting rings

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, CASADEI F 25 LL FK - Spindle Moulder with Tilting Spindle and Table Extensions With Aigner integral fence and 3-roll power feeder - Machine in like-new condition - Spindle moulder with tilting spindle from -45° to +45° Solid steel and grey cast iron construction Hodpfx Ahexac Eye Donu Dynamically balanced spindle assembly, anchored to the worktable Especially robust design Smooth operation due to precision assemblies and high dead weight Standard with reversible spindle rotation (right/left) and electronic lock when changing direction 5 speeds from 3000 - 10,000 rpm Speed can be changed easily and conveniently from the machine side Standard with MK 4 interchangeable spindle system Large worktable made of cast iron for lasting precision Easy operation thanks to controls and speed display on the front of the machine Spindle fence with fine adjustment and aluminium fence cheeks as standard Powerful industrial motor Equipment details: Spindle fence Spindle fence with hand crank/handwheel adjustment from the front With digital display Interchangeable spindle MK 4 interchangeable spindle standard on all CASADEI F 23 and F 25 models Sliding table option Optional sliding table for small tenoning jobs and slotting operations Scope of delivery: Manually tilting spindle from +45° to -45° Speed display via LED on the front Aluminium fence cheeks Curved moulding guard Reversible spindle rotation MK 4 interchangeable spindle Spindle fence with hand crank/handwheel adjustment from the front with digital display Table extensions left and right (2500 mm length) Extending workpiece support (2500 mm length) Model CASADEI F 25 LL FK Article No. 5220728 Technical data Worktable dimensions: 2500 x 810 mm Spindle tilting range: +45° to -45° Usable spindle length at diameter 30-35 mm: 140 mm Usable spindle length at diameter 40-50 mm: 180 mm Spindle stroke: 90 mm Max. tool diameter (profiling): 250 mm Max. tenoning tool diameter: 350 mm Max. form cutter diameter: 160 mm Max. lowerable tool diameter: 320 x 60 mm Speeds, 5-stage: 3000/4500/6000/8000/10000 rpm Motor power: 400 V / 50 Hz / S6-40% 7 kW Weight: 480 kg Extraction port diameter (fence): 1 x 120 mm Extraction port diameter (under table): 2 x 80 mm Location: Ex stock 54634 Bitburg - Available immediately -

Stanje: zelo dobro (rabljeno), Spodnji vretenasti rezkalni stroj Panhans 240A Premer vretena: 30 mm Dolžina vretena: 130 mm Spremenljiva hitrost vretena: 3000/4500/6000/9000 obr/min Elektronsko nastavljanje višine vretena Elektronsko nastavljanje omejevalnikov Elektronsko nastavljanje kota Štirivaljni potisni sistem SCM Hodpfx Ahsxg Iz He Denu

Stanje: dober (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 80-12/020-01, dolžina vretena za rezkanje: 30 mm, dolžina mize: 3.000 mm, širina mize: 380 mm, Oprema: motorna zavora, Tipi: KF 700 S Pro, Št. stroja: 8012/020-01. Leto izdelave: 2001, Napajanje: 3/400V/50Hz/10,1 A, Motor: 5,5 kW, Vreteno: 30 mm, Predhodna enota z dovodom polja, Miza: 3000x380 mm Hjdpfsxmhkhsx Ah Dsnu

Stanje: dober (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 80-03/224-02, moč: 4 kW (5,44 KM), vrtilni razpon: 45 °, Nagibna vretenasta rezkalnica, proizvajalec Felder, tip F 700 Z, letnik 2002, motor 4 kW, nagib do 45 stopinj. Vključno s podajalno napravo s 3 valji proizvajalca Haffner in pomično mizo. Hodpfx Ajxl E R Ash Denu

Stanje: dober (rabljeno), Leto izdelave: 1989, Funkcionalnost: popolnoma funkcionalen, vrsta nastavitve višine: mehanski, dolžina mize: 2.350 mm, največja hitrost vretena: 9.000 obr/min, skupna masa: 850 kg, potrebna širina: 1.200 mm, zahteva za prostor dolžina: 2.400 mm, potrebna višina: 1.620 mm, vhodna napetost: 380 V, največja hitrost vrtenja: 9.000 obr/min, vhodna frekvenca: 50 Hz, Oprema: motorna zavora, Namizni rezkar s nagibnim vretenom -5/+45 stopinj Vodilo rezkarja z digitalno nastavitvijo Obrati: 3000/4500/6000/9000 Hodpfx Ahsxl Sd Ne Denu 4-kolesni podajalnik

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1992,

Stanje: novo, Leto izdelave: 2025, Martin Swivel Spindle Moulder T 27 Flex – dual-sided swivel – Flexibility for today and tomorrow. Setting up a swivel spindle moulder is usually a major challenge. Not so with the T27 Flex, thanks to its modern touchscreen control: with integrated tool compensation, even complex milling patterns with a tilted spindle can be set up in no time. This allows the large swivel range of 2 x 46° to be utilized efficiently, enabling you to fully pursue your individual requirements. In addition, the machine can be tailored very precisely to the specific needs of your workshop. Hneder Hr D Nepfx Ah Dsu Features: - T 27 Flex - T 2711-a Digital display for fence jaw position via control system - T 2731-a Table extension on both sides + pull-out workpiece support - T 2740-a Centrex safety guard - T 2742-a Integral fence including filler bar - T 2790-La Console for power feed stand, left-side mounting Photo for illustrative purposes only / Power feed not included Location: Coming to stock at 54634 Bitburg - Available in two weeks -

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, For sale: Felder spindle moulder F-700 Z with 4 spindle speeds. This machine has been used as a display model in our showroom, making it as good as new and sold with full warranty / guarantee. Technical data: - 4 spindle speeds - Spindle can be tilted from 90° to 45° - Fence for tooling up to Ø 230 mm - Multi-adjustment system - Tenoning and slotting table - Motor power: 5.5 kW / 7.5 HP with star-delta start - Year of manufacture: 2023 / like new Hnodswp Ri Uopfx Ah Dju The machine is located at A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Information Tel.: 03137-3109 Related terms: spindle moulder, milling machine, moulders Reference: R-D1618

Stanje: zelo dobro (rabljeno), KATALOGŠKA ŠTEVILKA 6856 TEHNIČNI PODATKI - premer vretena: 30 mm - delovna višina vretena: 110 mm - blokada vretena - električno nastavljivo gor/dol + kot 0,18 kW - originalno vodilo s popolno nastavitvijo - 5 hitrosti vrtenja + desni/levi tek: 2900, 4400, 6000, 8000, 10000 obr/min - mere mize: 1200x900 mm - litoželezna miza - z električno zavoro - motor cca 7,5 kW - premer odsesovalnega nastavka: 150 mm - mere dolžina/širina/višina: 1750x1200x1750 mm - teža: 990 kg PREDNOSTI – izdelano v Nemčiji – nagibno vreteno – zavora – rabljeni rezkalni stroj, v zelo dobrem stanju Neto cena: 13.900 PLN Hodpfx Aoi Apg Hoh Denu Neto cena: 3.270 EUR Neto cena izračunana po tečaju 4,25 PLN/EUR (ob večjih tečajnih nihanjih se cena lahko spremeni)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1983, Funkcionalnost: popolnoma funkcionalen, Rezkar deluje brezhibno in je takoj pripravljen za uporabo! Hodpfxow R N E Ns Ah Dsnu

Stanje: rabljeno, Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, dolžina mize: 1.200 mm, širina mize: 800 mm, je popolnoma funkcionalen Hnodpfx Aeulkm Ash Dou

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1993, Kölle F45 nagibna vretenasta rezkalnica Nagib do 45° Velikost mize 1200 x 1000 Podaljšek mize desno in levo, vključno z izvlečno okvirno oporo Moč motorja Tek v desno-levo Preklopne hitrosti: 3000/6000, 4000/8000, 5000/10000 Aigner integralni prislon Električni nagib vretena z digitalnim prikazovalnikom Električna nastavitev višine vretena z digitalnim prikazovalnikom Rezkalni trn 30 mm Podajalna naprava Maggi s 3 valji Leto izdelave 1993 Hnedpfxsw Ulilj Ah Dou Žal je bil stroj na novo prebarvan s strani trgovca

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, The robust and stable construction of the spindle moulder ensures high-quality operation. The package includes an interchangeable spindle with ER collets for shank cutters. The retractable 30 mm spindle operates at four speeds. The thick cast iron table provides optimal and precise working conditions. There is a workpiece hold-down mechanism mounted on the top guard. The machine features a sturdy and massive base that dampens vibrations. Machine Description - Heavy and stable spindle moulder with interchangeable spindle and collet chuck! - Milling table made from precision-ground cast iron, ensuring optimal workpiece glide - Included: workpiece clamp, tilting fence adjustable 60° left/right, workpiece stop - REINFORCED balanced spindle enables perfect milling during operation. - Standard with height adjustment and scale! Hnodpfx Ajvugf Doh Dsu - Interchangeable spindle with ER collet chuck, angular stop, clamp, and tool holder - Spindle speed: 1,400 / 4,000 / 6,000 / 9,000 rpm - Machine equipped with anti-slip feet (vibration-free operation) - Designed for edge working of straight components as well as for the production of decorative mouldings, grooves, tongues, tenons, and dovetails - Machine meets all safety regulations and conforms to all OHS, technical documentation, and CE requirements Technical Specifications Motor power S1: 2.2 kW Voltage: 400 V Table dimensions: 620 x 510 mm Table height: 860 mm Extraction port: 100 mm Spindle stroke: 100 mm Max. clamping height: 105 mm Table opening: 160 mm Max. tool diameter under table: 150 mm Spindle speed: 1,400 / 4,000 / 6,000 / 9,000 rpm Spindle diameter: 30 mm Gross weight: 126 kg Overall dimensions: 640 x 660 x 1250 mm

Stanje: skoraj kot novo (rabljeno), For sale is a used Felder spindle moulder F-900 Z featuring a tenoning and slotting table with a length of 1300 mm. The machine has only been used as a display model in our showroom and is therefore in like-new condition. Technical specifications: - 5 spindle speeds - Spindle tiltable from 90° to 45° - Cutter fence for tooling up to Ø 230 mm - Multi-adjustment system - Tenoning and slotting table 1300 mm - Electrically height-adjustable and tiltable "PowerDrive" - Motor power: 7.3 kW / 9.9 HP SD-Start - Year of manufacture: 2022 Hnodpfsw Hfd Ijx Ah Dsu The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Info Tel. 06244-20299. Related keywords: spindle moulder, milling machine, milling Reference: R-A0117

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2010, Motor 7,35 kW 5 hitrosti 3500-10000 min–1 Nagib vretena rezkalnika 0-45° Hnedpfxjxbq Ule Ah Dju Dolžina pomične mize 1300 mm električna nastavitev višine in nagiba električno nastavljiv rezkalni omejevalnik Popolnoma zložljiv rezkalni omejevalnik maks. premer orodja 250 mm Aluminijaste čeljusti 550 mm Centrex zaščita za rezkanje Teža pribl. 650 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Swivel spindle moulder Utis CSN Digital & stand for feed unit, feed unit by Maggi, Italy Hnsdpowudlyefx Ah Dju Year of manufacture: 2007

Stanje: novo, Leto izdelave: 2023, Robust steel grey cast iron construction Milling spindle can be tilted backwards from 0° to -45° Forward and reverse rotation of the milling spindle Large-sized milling unit made of grey cast iron, mounted directly to the table Solid and precise cast iron table Standard swing-type milling guard Aluminium sliding table with ball contact system Torsion-resistant, highly precise, smooth-running, and reliable in daily operation 10-year SCM warranty against wear on the guideways Milling spindle supported at the top with precision ball bearings for minimal bearing load and maximum service life Precise milling fence with rapid adjustment and fine adjustment with scale at the fence jaw Integrated extraction port Large milling table opening enables use of larger tooling Hsdjiknp Rspfx Ah Djnu Weight approx. 290 kg Extraction connection diameter 2 x 120 mm Work table L x W = 1000 x 435 mm Table height 900 mm Sliding table length 1000 mm Sliding table width 270 mm Drive motor power 5.0 kW, 400 V, 50 Hz Milling spindle tilt 0° to -45° Usable spindle length 100 mm Maximum table overhang 130 mm Spindle speeds 3500/7000/10000 rpm Spindle diameter 30 mm Maximum retractable tool diameter 180 mm

Stanje: dober (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, Machine assembled and operational Hsdpfou Tq Sysx Ah Denu

Stanje: rabljeno, SCM glodalica Hnodpfx Aheuzivpe Dju

Stanje: rabljeno, Leto izdelave: 1998, številka stroja/vozila: AB/118120, TILTING SPINDLE MOULDER SCM MOD. T110I - CE - USED - Voltage: 400/50 - Serial No.: AB/118120 - Year: 1998 Hsdpewrfhkjfx Ah Denu

Stanje: dober (rabljeno), sander composed of: first unit – electronic cross-belt second unit – electronic pad-belt third unit – electronic super-finishing pad-belt machine equipped with inverter for belt drives and vacuum hold-down for small parts Hnjdpfx Aot N Tfcjh Deu machine designed for line integration

Stanje: novo, Tilting Spindle Moulder Simple and practical operations thanks to the ergonomic arrangement of the controls on the front of the machine. Digital display for the height and swivel position of the spindle. Spindle speed display. Right/left rotation of the spindle. 8 speeds. Hedpfxocuwpto Ah Dsnu Spindle diameter: 30 mm. Spindle clamping length: 125 mm. Max. tool diameter under table: 240 x 80 mm. Extraction port diameter: 2 x 120 mm. INCLUDES OPTIONS: 57.02.63 “LL” version for profiling work with 2 table extensions. 57.03.30 Motorized height and angle adjustment of the working unit with digital displays. 57.01.56 Three-phase motor 7.0 kW 50Hz with star-delta switching. 57.00.76 Fence adjustment with handwheel: - Fence with stepless adjustment via conveniently accessible handwheels on the front: – Adjustment of the entire fence in relation to the tool. – Adjustment of the front ruler to change chip removal. – Mechanical digital displays. – Wooden pressure faces and connecting rails. Dimensions (L x W x H): 2500 x 855 x 900 mm Weight: approx. 550 kg Note on used machines: • Technical data subject to errors and prior sale reserved. • Stated prices are ex location and ex loading! • The machines have been cleaned and tested for function. • All machines are sold as seen, without any warranty claims. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (Inquiries will only be answered if you provide your address and telephone number!)

Stanje: novo, Work table dimensions: 2500 x 780 mm Milling spindle diameter: 30 mm Swivel range of the milling spindle: +/- 45.50° Clamping length of the spindle: 140 mm Max. tool diameter under the table: 300 x 80 mm Spindle base overhang from table: 50 mm Extraction port diameter: 1 x 120 & 2 x 100 mm Electrospindle motor power: 7.50 kW Electrospindle with inverter for speeds from 900 to 12,000 rpm Swiveling control panel with "Easy Touch 7" electronic control "Flex" milling fence with automatic adjustment via electronic control Spindle forward/reverse operation Extendable table support at the front INCLUDES OPTIONS: - "Fast" table insert with automatic adjustment via 'Easy' control - "LL" version with 2 cast iron table extensions, total length 2500 mm Note on used machines: • Technical data and prior sale subject to change and errors. • Quoted prices are ex-works, loaded free on truck. • The machines have been cleaned and function tested. Hnjdpjd Etkhofx Ah Dsu • All machines are sold as inspected, without any warranty claims. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid if made in writing. (We only respond to inquiries with your full address and telephone number!)