Scm Ti nakup rabljenega (576)

Stanje: novo, Tilting Spindle Moulder Simple and practical operations thanks to the ergonomic arrangement of the controls on the front of the machine. Digital display for the height and swivel position of the spindle. Spindle speed display. Right/left rotation of the spindle. Isdpfscuwptjx Ah Aeik 8 speeds. Spindle diameter: 30 mm. Spindle clamping length: 125 mm. Max. tool diameter under table: 240 x 80 mm. Extraction port diameter: 2 x 120 mm. INCLUDES OPTIONS: 57.02.63 “LL” version for profiling work with 2 table extensions. 57.03.30 Motorized height and angle adjustment of the working unit with digital displays. 57.01.56 Three-phase motor 7.0 kW 50Hz with star-delta switching. 57.00.76 Fence adjustment with handwheel: - Fence with stepless adjustment via conveniently accessible handwheels on the front: – Adjustment of the entire fence in relation to the tool. – Adjustment of the front ruler to change chip removal. – Mechanical digital displays. – Wooden pressure faces and connecting rails. Dimensions (L x W x H): 2500 x 855 x 900 mm Weight: approx. 550 kg Note on used machines: • Technical data subject to errors and prior sale reserved. • Stated prices are ex location and ex loading! • The machines have been cleaned and tested for function. • All machines are sold as seen, without any warranty claims. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (Inquiries will only be answered if you provide your address and telephone number!)

Stanje: skoraj kot novo (rabljeno), SCM spindle moulder sliding table integrated into the worktop, 120 cm Iiodpfx Ahewt A Iqs Aek height and tilt adjustment electrically controlled spindle diameter 30 mm motor 7 kW 4 spindle speeds very good condition

Stanje: novo, Leto izdelave: 2022, Swiveling spindle 0° - 45° Height and swivel adjustment via handwheel Iiedoipv A Topfx Ah Ajk Dial gauges integrated into handwheel Motor power 7.0 kW 4 spindle speeds 30 mm milling spindle Aluminum fence jaws Milling fence with crank adjustment Long cast iron tables Safety guards

Stanje: novo, Work table dimensions: 2500 x 780 mm Milling spindle diameter: 30 mm Swivel range of the milling spindle: +/- 45.50° Clamping length of the spindle: 140 mm Max. tool diameter under the table: 300 x 80 mm Spindle base overhang from table: 50 mm Extraction port diameter: 1 x 120 & 2 x 100 mm Electrospindle motor power: 7.50 kW Electrospindle with inverter for speeds from 900 to 12,000 rpm Swiveling control panel with "Easy Touch 7" electronic control Iiodpfsd Etkhex Ah Aek "Flex" milling fence with automatic adjustment via electronic control Spindle forward/reverse operation Extendable table support at the front INCLUDES OPTIONS: - "Fast" table insert with automatic adjustment via 'Easy' control - "LL" version with 2 cast iron table extensions, total length 2500 mm Note on used machines: • Technical data and prior sale subject to change and errors. • Quoted prices are ex-works, loaded free on truck. • The machines have been cleaned and function tested. • All machines are sold as inspected, without any warranty claims. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid if made in writing. (We only respond to inquiries with your full address and telephone number!)

Stanje: zelo dobro (rabljeno), premer trna: 30 mm, Oprema: motorna zavora, SCM spindle moulder, model T130, with four-roller power feed unit, table size 1200x730 mm, maximum speed 10,000 rpm, spindle diameter 30 mm. Motor: 5.5 kW. For an additional charge, a spindle with 40 mm diameter can also be supplied. Isdpfxjt Rfn Eo Ah Aeik

Stanje: kot nova (razstavni stroj), pneumatic single-head boring machine with 21 spindles MAGGI Model: Boring System 21 STANDARD EQUIPMENT: - Aluminium fence with 2 stops (each 1,500 mm, right and left) - No. 5 quick-change chucks - No. 2 patented safety pneumatic hold-down cylinders - Connector for suction/extraction unit compliant with EU standards KEY FEATURES: - Worktable made of cast iron - Boring head made of aluminium - Patented spiral system for fine adjustment of drilling depth - Pneumatic lowering of the boring head, lockable in any position between 0° - 90° - Extendable cast iron side stops with millimetre adjustment, readable on a scale with magnifier - Drill height adjustment via digital counter with decimal display - Fixed stops, 37 mm, for cup hinges - Machine constructed according to CE standards TECHNICAL DATA: - Boring spindles (left red/right black): 21 pcs. (10/11) - Distance between boring spindles: 32 mm - Working width: 640 mm - Max. drilling depth: 65 mm - Number of pneumatic hold-down cylinders: 2 pcs. - Max. workpiece size: 900 x 3000 x 60 mm - Max. workpiece height: 65 mm - Number of motors: 1 pc. - Motor power: 1.5 kW, 400 V, 50 Hz - Motor speed: 2800 rpm - Working pressure: 6-8 bar Isdpsd Supgjfx Ah Aeik - Standard air consumption per cycle: 10 l/cycle - Extraction port diameter: 80 mm - Worktable height: 860 mm Overall dimensions (approx.) L x W x H: 1030 x 1030 x 1285 mm Weight (approx.): 260 kg

Stanje: dober (rabljeno), Kód: 0465 Značka: IDM - SCM GROUP Model: IDIMATIC 49-20 Automatická olepovačka hran pro nanášení hran na dřevo, PVC, dýhu, melamin, ABS pro výrobu nábytku, vybavení interiérů, kuchyní, koupelen, dveří, panelů a další aplikace. Iijdpfxovhc E Hs Ah Ask Technické údaje: Min./max. lepicí výška: 10/50 mm Min./max. tloušťka hrany: 0,4/20 mm Minimální šířka panelu: 60 mm Minimální délka panelu: 140 mm Nastavitelná posuvná rychlost: 12/18 m/min Elektrický zdvih přítlačné lišty Teleskopická opora pro velkoformátové panely Odlučněná kabina Složení stroje: Jednotka proti přilnutí: nanáší protilepicí kapalinu na horní a spodní plochy panelu Lepicí jednotka s předtavicí jednotkou Přítlačné válečky Čelní ořezová jednotka pro svislý ořez přebývající hrany vpředu a vzadu — 2 motory 0,5 kW, 12 000 ot/min, průměr nástroje 110 mm Horní a dolní frézovací jednotka s překládanými motory pro frézování horní a spodní přečnívající hrany — 2 motory 0,5 kW, 12 000 ot/min Horní a dolní zaoblovací jednotka pro finální horní a spodní ořez přebývající hrany — 2 motory 0,5 kW, 12 000 ot/min Manuální revolverové zařízení — automatická pozice nástrojové hlavy a čelních kopírovacích válečků podle zvolené tloušťky hrany Frézovací jednotka vytváří průchozí i slepé otvory na ohraněné hraně a na horní a spodní části panelu, časově řízená Čisticí jednotka na kartáčování a leštění nalepené hrany — 2 motory 0,18 kW, 1 400 ot/min, svisle polohovatelné v rozsahu 0° až 30° Stlačený vzduch: 7–8 bar Celkové rozměry: 5 600 × 1 000 × 1 500 mm (v) Hmotnost: 2 500 kg

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED SIZING AND EDGE BANDING MACHINES – First (1st) machine in a production line Edge Material (roll) Thickness (min/max) mm: 0.3 / 3 Panel Thickness (min/max) mm: 10 / 60 Working Width (min/max) mm: 230 / 1600 (approx.) Control / Software: WinEdge Feed Speed (adjustable) m/min: 10 - 30 (approx.) Protective and soundproof enclosures SIZING UNIT (per side): No. 2 Hogging units (2 x 5.8 kW approx.) Iiedpfel Hydmsx Ah Ajk No. 2 Jointing units aft (2 x 4 kW approx.) EDGE BANDING SECTION (per side): Gluing unit (Hot Melt glue + pre-melter) Pressing zone (CNC-controlled) Edge magazine for rolls (slot number): 6 Pre-milling unit 08.055 (2 x 1 kW approx.) Milling unit (2 x 0.5 kW approx., 0°-30°) No. 5 Universal milling units for grooving/rabbeting and profiling (5 x 4 kW approx.) Profile scraping unit Flat scraping unit Spraying unit (for polishing liquid) Buffing unit + hot air blower – edge finisher

Stanje: rabljeno, številka stroja/vozila: 007966, Pozicija 1: Nakladalec SCM-EVOLUTION C Iedpfxswu Agpe Ah Aoik Pozicija 2: Dvostranski lepilni stroj za robove SCM-EVOLUTION C Pozicija 3: Razkladalec SCM-EVOLUTION C

Stanje: rabljeno, Leto izdelave: 2011, Obdelovalna velikost v X-smeri: 2770 mm Iijdpfxevvi Hte Ah Aek Obdelovalna velikost v Y-smeri: 1220 mm Obdelovalna debelina (Z-mera): 80 mm Zasnova stroja: portalni stroj Moč glavnega vretena: 11,0 kW Hitrost glavnega vretena: 1500 - 24.000 obr/min Vektorsko vodeno vreteno: Da Vpenjalni sistem: HSK 63 F Hlajenje vretena: zračno hlajenje Število osi: 3 Menjalec orodij: Da, kos Število mest za menjavo orodij: 10 kos Pisalniška tipkovnica: Da Miška: Da Programski sistem: Xilog Plus DXF vmesnik: Da Možna spletna povezava: Da CD-ROM pogon: Da Izvedba mize: rešetkasta miza Ustavljalni sistem: ustavljalni valj Število vakuumskih črpalk: 1 Moč vakuumske črpalke: 250 m³/h Zavarovanje: varnostne pohodljive preproge Lokacija skladišča: Sonnefeld

Stanje: zelo dobro (rabljeno), CNC window machining center. Iiedpowmxkhefx Ah Aek

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Compact wide belt sander with combination sanding unit Special features: - Activation and deactivation of the sanding pad from the control panel - Activation and deactivation of the roller from the control panel - Electronic control Fox 500 KTR - Table extension with 2 rollers for infeed and outfeed - Automatic table positioning with push-button control Isdpfegf Sw Nex Ah Asik Article number: 5222100A2 Also suitable for smaller workshops for occasional use Combination sanding unit with sanding pad for fine sanding Standard equipment includes grooved steel roller Ø 120 mm for calibration Precision adjustment of working height Clearly arranged control panel at the front Robust, pipe-reinforced monoblock steel frame, robot-welded, with working units mounted high for maximum rigidity Motorized height adjustment of the working table with digital display Electronically controlled sanding belt oscillation Feed conveyor with gear motor and two speeds Natural rubber feed belt with negative profile Flexible steel pressure bar in front of the first unit Rubber pressure rollers before and after each working unit Pneumatic belt tensioning for each unit with decimal correction for grit/thickness Universally usable for solid wood and veneer thanks to combination unit Entry-level model for small businesses Working width: 950 mm Equipment details Combination unit for calibration and sanding Grooved steel roller Ø 120 mm with fine height adjustment Hard sanding pad with graphite backing Universal model for calibration and sanding work on solid wood, particleboard, and veneer Technical data Product length approx. 1388 mm | Product height approx. 1668 mm Product width/depth approx. 1545 mm Extraction connection Extraction nozzle diameter: 140 mm Electrical data Connection voltage: 400V | Current type: AC Phase(s): 3Ph | Mains frequency: 50Hz Feed motor power: 0.33 / 0.55 kW | Height adjustment motor: 0.25 kW Drive motor power: 7.5 kW Sanding unit Sanding belt length: 1525 mm | Max. sanding width: 950 mm Sanding belt width: 970 mm Feed unit Feed speed: 4.5 / 9 m/min Workpiece Minimum workpiece height: 4 mm | Maximum workpiece height: 170 mm

Stanje: dober (rabljeno), Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, širina skobljanja: 520 mm, število rezil rezkalnika: 4, vrsta nastavitve višine: električni, Oprema: motorna zavora, Description SCM FS 520 – Surface Planer & Thicknesser Combination Machine | Year of Manufacture: 1995 | Good Condition For sale is a robust and precise combination machine from SCM: SCM FS 520, year 1995, ideal for professional workshops and ambitious joiners/cabinetmakers. The machine has been regularly serviced and is in good technical condition. Technical Data & Equipment: + Manufacturer / Model: SCM FS 520 + Machine type: Combined Surface Planer & Thicknesser + Year of manufacture: 1995 + Motor power: 5.5 kW (three-phase current) + Cutter block: Centrofix system (quick knife change, precise cut) + Number of knives: 4 Centrofix knives + Planing width: 520 mm + Thicknesser width: 520 mm + Max. planing depth: approx. 5 mm + Thicknessing height: 3 – 250 mm + Feed speed: 6–12 m/min (two-stage) + Planer table length: approx. 2200 mm (infeed and outfeed table) + Pneumatic table opening: Yes – facilitates switching between surface planing and thicknessing + Electric height adjustment of thicknesser table with digital display + Weight: approx. 1000 kg + Extraction port: 120 mm + Voltage: 400 V Condition & Maintenance: + Machine from a well-maintained workshop + Centrofix knives in good condition + Tables are flat, bearings run smoothly Isdpfx Ahox Aibas Asik + Ready for immediate use + No known repairs required You will receive an invoice with VAT shown separately. Shipping via freight forwarder possible by arrangement. Price: +Negotiable €7,650 net ex-works Haldensleben.

Stanje: zelo dobro (rabljeno), Double-sided single machine (or 1st and/or 2nd machine in a machine line) Edge thickness in rolls (min/max): 0.4 / 3 mm Panel thickness (min/max): 14 / 60 mm Working width (min/max): approx. 260 / 3200 mm Control / Software: MAESTRO PRO EDGE Feed speed (adjustable): 10–40 m/min Safety and noise protection cabin + cam spacing (mm): 400 Iiedpfx Aswhi Sljh Ajk Panel processing (for each side): - Protection cutter (pre-milling) AS (1 x 4 kW) - Chipper unit DTR (2 x 8 kW) - Spray unit (for liquid anti-adhesive) AAR EDGE BANDING SECTION (for each side): - Radiator to heat workpiece edges - Gluing station (hot melt + pre-melter) - Pressure zone (CNC controlled) - Motorised edge magazine for rolls (2 positions) - End trimming unit YU/SP-750 (30 m/min) - Pre-milling unit RSP - Multi-profile milling unit (CNC controlled) RI/S 2P - Copy shaping unit (profile tracing) C1+C2 (4 x 0.35 kW) ED-SYSTEM and Fast-Release - Profile scraping unit RAS/S - Flat scraper unit RCA/2C - Spray unit (for polishing liquid) - Buffing unit SPE - Universal milling unit for grooving/rabbetting and profiling U (1 left + 1 right) 2 x 5.5 kW

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: AE00000087, Znamka in model: SCM ACTION P Leto izdelave: 2018 Stanje: Malo rabljen, odlično ohranjen Lokacija: Hrvaška Ključne tehnične specifikacije: Iijdpfexr T N Tsx Ah Ask - Tip: Avtomatska stiskalnica za omare z "glavničnim" pritiskalnim sistemom - Vertikalno in horizontalno avtomatsko vpenjanje - Brezkrtačni motorji: 2 kW (vertikalno), 1,5 kW (horizontalno) - Hitrost pozicioniranja: do 160 mm/s - Največja pritisna sila: 1400 kg (vertikalno), 1600 kg (horizontalno) - Delovno območje: do 2500 mm dolžine, 1300 mm višine, 800 mm globine - Instalirana moč: 4 kW / 15 A - Teža: pribl. 1800 kg - Dimenzije stroja: 4200 × 1200 × 2250 mm - Varnost: Varnostne fotocelice na obeh straneh Funkcionalnost: - Ročno natovarjanje in raztovarjanje - Idealno za hitro sestavo omar v kuhinjah, kopalnicah in pisarnah Cena: €16.500 + DDV Opombe: - Stroj je v odličnem obratovalnem stanju in je bil malo rabljen - Odličen za proizvajalce, ki želijo optimizirati sestavo omar - Na voljo takoj Za več informacij, slike ali ogled – kontaktirajte nas.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, ACTION M okvirna preša Preša za bilo koju vrstu prozorskog sustava: prozore, rolete s letvicama, kapke i vrata od punog drva. Maks. radne dimenzije D x V 3500x2500 mm Minimalne radne dimenzije D x V 250x375 mm Maks. vertikalni/horizontalni potisak 7,4/2 tone Radna visina 480/1050 mm Snaga hidraulične pumpe 2,1 kW KOMPOZICIJA STROJA: ACTION M ACTION M OKVIRNA PREŠA kom 1 109831 Normativni CE prema SM 1 R00494 action m 35-25 1 Iodpfx Ahjwh T Dlo Ajik 930731 Volt 400 EU 1 931201 Frekvencija 50 Hz 1 530074 Radne površine greda obložene PVC-om 1 530075 Međuručna poprečna greda s klipom i kontra-granicom 1 530076 Hidraulički sustav za rad pod niskim tlakom 1 530077 Oprema za trapezoidne proizvode s oscilirajućom glavom za prilagodbu različitim kutovima prozorskog sustava 1

Stanje: rabljeno, Leto izdelave: 1992, Stroj je v rabljenem, vendar dobrem stanju. Stroj deluje brezhibno. Agregat je treba natančno nastaviti. Ijdpfoxxn Tmjx Ah Aeik Za vprašanja ali zanimanje nas prosim kontaktirajte!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.200 mm, pomik osi Y: 1.550 mm, Rabljena SCM Pratix S 15 - Leto: 2012 - Na voljo januarja 2026 - 3 osi - Vrtalna glava - Video posnetki na voljo Iiedjxl D Slopfx Ah Ajk

Stanje: zelo dobro (rabljeno), SCM Praktika in excellent condition Ijdpfjt Hkq Rsx Ah Aeik

Stanje: zelo dobro (rabljeno), SCM Multiflex angular processing centre for single-sided cross and longitudinal machining of window and door corners Tenoning spindle, length 320 mm, max. working range 320 mm Roller feed system Profiling spindle, length 320 mm, max. working range Isdpfx Aowmcnwoh Asik

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, I am selling the window construction angle line SCM Multiflex. - Milling heads: VIVALDI EU68mm - Cutting and tenoning spindle on the right / tenoning side Iedpfx Ahohw Dfye Ajik - 2 pcs. profile milling spindles + glazing bead crosscut saw on the left / profiling side - Available immediately.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, working area: 2700x1250mm Z-axis travel: 160mm rotary C axis electrospindle power: 8.5kW electrospindle speed: 24,000 rpm convenience tool magazine for 8 tools main tool magazine for 10 tools Iedpfxowp R Eij Ah Ajik sawing aggregate on X and Y axes vertical drills on X axis – 8 units vertical drills on Y axis – 5 units horizontal drills on X axis – 4 units horizontal drills on Y axis – 4 units HSK 63 tool holders central lubrication pump vacuum raster table edge milling unit on X axis year of manufacture: 2011

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, Manufacturer: SCM Model: PRATIX 22 Year of manufacture: 2017 Working area X: 3086 mm Working area Y: 2155 mm Working area Z: 150 mm Number of milling spindles: 1 Main motor: 9.5 kW Max. spindle speed: 24,000 rpm Fixed clamping points for aggregates Tool holder: HSK-F63 Tool magazine capacity: 19 positions Gantry construction Machine with moving gantry Grid table Vacuum pump Two vacuum pumps with a capacity of 250 m³/h each Drilling unit Iodpfxew Ahr Te Ah Asik

Leto izdelave: 2022, Stanje: skoraj kot novo (rabljeno), številka stroja/vozila: S3980***, Technical data 30-20 35-25 Iiedpfx Ajwrbiwsh Ajk Max working dimensions L x H mm 3000x2000 3500x2500 Min working dimensions L x H mm 250x350 250x375 Max vertical/horizontal thrust ton 7.4/2 7.4/2 Working height mm 480/1050 480/1050 Hydraulic pump power kW 2.1 2.1

Stanje: zelo dobro (rabljeno), two bottom drilling heads one side drilling head beams with 21 spindles each spindle spacing 32 mm motors 3x1.1 kW 2 pneumatic clamps Isdpfsw Ad Tgsx Ah Aeik adjustable head spacing left/right spindles