Martin nakup rabljenega (81)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Sliding table length: 3700 mm Cutting width at rip fence: 850 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 120 mm Scoring unit: no Saw blade height adjustment: electric / position control Saw blade tilt adjustment: electric / position control Rip fence adjustment: manual Saw blade diameter: 400 mm Speeds: 4000 / 4800 / 6000 rpm Motor power: 7.5 kW, 400 V, 50 Hz Extraction connection: 80 and 120 mm INCLUDES: Laser cut-line indicator Fsdpexzfqbsfx Abtjgc MITREX double mitre fence Machine dimensions approx. L x W x H = 3850 x 1650 x 1850 mm Weight approx. 1200 kg Note for used machines: • Errors in technical details and prior sale excepted. • Stated prices are ex location – loaded free of charge! • The machines have been cleaned and function-tested. • All machines are sold as seen with no warranty or guarantee of any kind. Buyers are welcome to inspect machines on site. • Special agreements are only valid in written form. (We will only respond to inquiries that include your address & phone number!)

Stanje: rabljeno, Leto izdelave: 2006, Motorizirani paralelni prislon, vzdolžni prislon z zaslonom, enostranski motoriziran nagib, drsni voziček 3000 mm, 5,5 kW predrezilo. Lokacija zaloge: dobavitelj Fedpfxjzawiue Abtjgc

Stanje: rabljeno, Leto izdelave: 1951, številka stroja/vozila: 6886, Swing diameter over bed: 500 mm Swing diameter over cross slide: 300 mm Swing diameter in gap: 760 mm Turning length: 1100 mm Centre height: 250 mm Feed rates - cross: 0.023 - 0.32 mm/rev Feed rates - longitudinal: 0.07 - 1.0 mm/rev Leadscrew pitch: 4 / 12 settings Spindle bore: 65 mm Spindle speed: 13 - 600 rpm Thread cutting - metric pitch: 0.5 - 84 mm Thread cutting - imperial: 0.375 - 14 TPI Tailstock quill travel: 200 mm Fsdpfx Aecxxq Ujbtsgc Total power requirement: 3 kW Machine weight approx.: 2.7 t Space requirements approx.: 2.8 x 1.2 x 1.25 m with longitudinal and cross feed, 3-jaw chuck Ø 380 mm; swing diameter over bed without bridge 760 mm;

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, številka stroja/vozila: V 453572, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 1.770 h, moč: 6 kW (8,16 KM), vhodna napetost: 400 V, vhodni tok: 19 A, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: Klimatska naprava, premer vretena: 30 mm, vrtilni razpon: 90 °, nastavitev vzdolžnega vodila: poganjan z motorjem, vrsta aktuacije: električni, največja hitrost vrtenja: 9.000 obr/min, vrtljajska hitrost (min.): 3.000 obr/min, širina mize: 900 mm, dolžina mize: 2.405 mm, skupna dolžina: 3.000 mm, skupna širina: 1.260 mm, skupna višina: 1.800 mm, skupna masa: 1.300 kg, leto zadnje generalne obnove: 2026, Oprema: CE označba, Martin T26 DuoControl Spindle Moulder 5/6 kW (6.8/8.2 HP) - 400 V, 50 Hz with neutral conductor, CE-compliant configuration with 2-axis control for spindle height and fence positioning, electromechanical tilt adjustment with digital display, including swiveling control panel with CPS Gamma V safety system *with 40 mm / 160 mm long milling arbor // Table size: 2405 mm x 900 mm // Table height: 900 mm // Table openings: electrical adjustment 70 mm - 220 mm // Weight: 1300 kg // Spindle speeds: 3000 / 4500 / 6000 / 9000 rpm with quick-action belt tensioning system // Displays: electric speed display digital (LED) display for spindle height (absolute and relative), as well as tilt angle automatic correction value display for milling depth dual hour meter for total and batch operating hours // Milling spindle: electrically tiltable +/- 45.50° via button, electric height adjustment with rapid and fine feed, steep taper SK 40, Dornfix quick change system including torque wrench maintenance-free electric braking Electro-pneumatic locking via selector switch // Spindle travel: 150 mm at 5/6 kW and 7.5 kW, 125 mm Fsdpozamwuefx Abtogc // Milling fence: Aigner integral fence Milling jaws made of hard-coat aluminum, with mountings for profile board or guide rail Handwheel adjustment with mechanical digital counters Infeed jaw adjustable separately Max. tool diameter: 250 mm // Extraction system: Extraction port 120 mm diameter at the fence Extraction port 120 mm diameter under table // Maintenance equipment: Central lubrication via pump Spindle lubrication via grease quantity controller 1 x open-end wrench 1 x torque wrench for Dornfix system 1 x oil gun 1 x grease gun filled with long-life grease 1 x ball bearing for guide ring 62 mm 1 x FRS95 arc guard for work on the guide ring, with extraction port and feed strip // Electrical equipment: Lockable main switch, automatic star-delta starter, wear-free electric brake Contact for extraction system control, undervoltage release, CEE torque socket for feed unit (5-pin socket) Selector button for direction of rotation, motor protection switch, and winding protection BG inspection certificate no. 991002 GS-certified for wood dust no. 991001 EC type-tested no. 991003 Additionally: 1 x electrically adjustable table opening 1 x support for swiveling feeder mount with motorized height adjustment with control panel 1 x extension for pull-out table width

Stanje: rabljeno, Dolžina vozička: 2500 mm Širina reza na vzdolžnem prislonu: 1000 mm Širina reza na prečnem prislonu: 2800 mm Globina reza: 120 mm Predrezilo: ne Višinsko nastavljanje žaginega lista: ročno kolo Nagibno nastavljanje žaginega lista: ročno kolo Nastavljanje vzdolžnega prislona: ročno Prikaz kota žaginega lista: skala Prikaz višine reza: - Prikaz vzdolžnega prislona: skala Fjdjy S Rq Djpfx Abtjgc Prikaz prečne letve: skala Premer žaginega lista: max 400 mm Št. obratov: 2800 / 4000 / 5500 Moč motorja: 5,5 kW Priključek za odsesavanje: 120 mm Dolžina stroja: 3000 mm Širina stroja: 1800 mm Teža: pribl. 1300 kg

Stanje: novo, Leto izdelave: 2024, Martin Thickness Planer T45 with XPLANE Cutterhead The T45 thickness planer offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and simple to operate, and works extremely quietly. The standard electronic control unit allows you to store up to 99 planing dimensions, making height adjustment for planing exceptionally easy—your first workpiece will already fit perfectly. Of course, the thickness table can be moved either by a simple press of a button or incrementally in 0.1 mm steps. The feed rate controls are conveniently within reach. The heavy-duty, vibration-damping composite frame combined with the precision-mounted cutterhead guarantees excellent surface results. Thanks to the sound-insulated construction, even the standard version operates quietly. • Planing width: 630 mm • Weight: approx. 1,200 – 1,400 kg • Planing height: 2.8 – 300 mm • Table length: 1,260 mm • Minimum workpiece length: 270 mm • Spindle speed: 5,000 rpm • Operation: 1-axis controller for planing dimensions, up to 99 values storable, 49 freely programmable for custom planing sequences; buttons for manual quick/fine adjustment of planing thickness with digital readout; push-buttons for cutterhead start/stop; built-in operating hours counter • Cutterhead: Solid steel Xplane cutterhead Cutterhead with 3 helical knife rows (33 curved carbide knives per row); delivery includes full set of knives and a Torx T20 wrench; spindle speed 6,000 rpm included; The emission sound pressure level LpA during machining is reduced by 10 dB(A) • Thickness Table: Electric table adjustment with fine setting, travel speed 10 mm/s, securely mounted on 4 supporting spindles, finely planed table surface • Feed: 2 speeds, 6 / 12 m/min, electrically selectable even during operation; large rubber feed rollers Ø 85 mm for compensation of varying wood thicknesses; rubber rollers are gentle on material and self-cleaning, rollers easily replaceable; segmented infeed pressure bar • Extraction: Pivotable, split extraction hood with chip extraction port Ø 160 mm, optionally connectable left/right (both sides possible in special cases); minimum extraction airflow: 27 m³/min at 20 m/s • Maintenance: Central lubrication strip for oil points; lubrication of bearings/cutterhead via grease nipples • Accessories: 1 grease gun pre-filled with long-life grease, 1 oil can, 1 open-ended wrench, 1 tool for knife changing, 1 pair of dummy knives 640 mm, 2 pairs of TERSA reversible knives 640 mm CV • Emission values: Workplace emission sound pressure level LpA according to DIN EN ISO 11202 [dB(A)] Idle sound (without extraction) P1 65 Idle sound (with extraction) P1 77 Operating sound (without extraction) P2 65 Operating sound (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle sound (without extraction) 84 Operating sound (with extraction) 90 Dust emission: Low-dust per DGUV 209-044 / BGI 739-1 Fgsdpfxsqlck Nj Abtsc Location: ex stock 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2024, Martin Thickness Planer T 45 with Tersa Cutterhead The T45 thickness planer provides ideal conditions for modern manufacturing: It delivers cleanly planed surfaces, is quick and simple to operate, and also works extremely quietly. The standard electronic control with 99 stored planing dimensions makes height adjustment so easy that even the very first workpiece fits perfectly. Naturally, the thickness table can be moved at the push of a button or incrementally adjusted upwards in 0.1 mm steps. The feed control elements are also conveniently within reach. The heavy, vibration-damping composite base combined with the high-quality cutterhead bearings guarantees outstanding surface quality. Thanks to the sound-insulated construction, the standard version already operates with low noise emissions. • Planing width: 630 mm • Weight: approx. 1,200 - 1,400 kg • Planing height: 2.8 - 300 mm • Table length: 1,260 mm • Minimum workpiece length: 270 mm Fedpfx Abeqlckpjtsgc • Speed: 5,000 rpm • Controls: Single-axis control for planing dimension, up to 99 values storable, 49 of which can be used in a freely programmable planing sequence; buttons for manual rapid and fine adjustment according to digital display, pushbuttons for cutterhead start/stop, integrated operating hour counter • Cutterhead: TERSA solid steel Z4 Ø 125 mm; with lock for easy knife change • Thickness table: Electric adjustment with fine setting, travel speed 10 mm/s, four supporting spindles for tilt-free stability, precision-planed table surface • Feed: 2 speeds – 6 / 12 m/min, electrically selectable during operation; large rubber feed rollers Ø 85 mm for compensating varying timber thicknesses, gentle on material and self-cleaning, easy roller change; sectional pressure bar at infeed • Extraction: Swiveling, split hood with chip extraction port Ø 160 mm, connectable on left or right (dual-sided in special cases); minimum extraction airflow: 27 m³/min at 20 m/s • Maintenance system: Central lubrication rail for oil points; lubrication of bearings/cutterhead via nipple • Accessories: 1 grease gun (filled with long-life grease) 1 oil gun 1 open-ended wrench 1 tool for knife change 1 pair of dummy knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV • Emission values: Emission sound pressure level at workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (with extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Low-dust emissions according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Stanje: novo, Leto izdelave: 2025, Martin Panel Saw T 66 Cutting height: 155 mm Saw blade diameter: 450 mm Tiltable: one side Drive power: 5.5 kW Sliding table length: 3.0 m Cutting width: 1350 mm Rip fence adjusted by handwheel Standard crosscut table with length stop for angle cuts Analog length stop with continuous fence Rear table extension T66 T6615/2-a Drive power 5.5 kW T6630/3-a Sliding table length 3.0 m T 6635/3-a Cutting width 1350 mm Fodpfx Abov Erkastsgc T 6641-a Rip fence moved by handwheel T6660/1-a Standard crosscut table for angle cuts T 6670-a Analog length stop T 6680/1-a Rear table extension Location: ex-stock 54634 Bitburg - immediately available - Some of the options shown in the photos are not included in the offer.

Stanje: novo, Leto izdelave: 2024, Martin T 54 Surface Planer Only with a high-quality surface planer can you achieve truly perfect foundational work. The T54 was developed precisely with this objective in mind. It allows you to effortlessly dress workpieces at the highest modern standards and accurately apply angled edges. The machine comes standard with a TERSA solid steel cutterblock. The Xplane cutterblock with a shearing cut is available as an optional extra. Chamfer planing is handled with ease, as the user-friendly single-lever adjustment allows you to quickly set any angle between 90° and 45°. The robust cast iron tables of the T54 provide a stable support, even for large and heavy workpieces. Should you require even more support surface, both the infeed and outfeed tables can be extended by 380 mm each – also in cast iron, of course. Technical Data: Fsdpfx Abspgkmwjtogc Table width: 500 mm Table length: 2,840 mm Maximum depth of cut: 8 mm Cutterblock: 125 mm diameter, 5,000 rpm, Tersa Z4 Speed: 5,000 rpm Motor power: 5.5 kW Fence adjustable up to 45° Auxiliary fence for small workpieces Motorized table adjustment Features: T 54 T 5462-a Suvamatic T 541-a Tersa 4-knife cutterblock Location: In stock, 54634 Bitburg - available immediately -

Stanje: novo, Leto izdelave: 2025, Surface Planer Martin T 54 Only with a high-quality surface planer can you truly achieve the perfect foundation. The T54 was developed precisely with this goal in mind. It enables you to easily plane workpieces at the most modern standards and safely fit them with accurate angled edges. The machine comes as standard with a TERSA solid steel cutter block. The Xplane cutter block with shear-cut action is available as an option. Chamfering is effortless, as the user-friendly single-handed adjustment allows any angle between 90° and 45° to be quickly set. The robust cast iron tables of the T54 provide a secure platform, even for large and heavy workpieces. If additional support surface is required, both the infeed and outfeed tables can be extended by 380 mm each—also made of cast iron, of course. Technical Data Fgodpfxspq If Ds Abtec Table width: 500 mm Table length: 2840 mm Maximum cutting depth: 8 mm Cutter block: diameter 125 mm, 5000 rpm, Tersa Z4 Rotation speed: 5000 rpm Motor power: 5.5 kW Fence adjustable up to 45° Auxiliary fence for small workpieces Electrically driven table adjustment Equipment: T 54 T 5462-a Suvamatic T5406/3-a solid steel Xplane cutter block with 3 spiral knife rows (each row with 26 domed carbide knives; 2 counter knives), includes full knife set and a Torx T20 T-wrench; spindle speed 6,000 rpm included. The emission sound pressure level LpA during operation is reduced by 8 dB(A). Location: ex-stock 54634 Bitburg - immediately available -

Stanje: dober (rabljeno), Leto izdelave: 1982, Rabljeni debelinski skobeljni stroj Gebr. Martin, tip: T 42 Leto izdelave: 1982 Širina skobljanja: 630 mm Višina skobljanja: 250 mm Podajalna hitrost: 8-20 m/min Sesalni priključek: 160 mm Teža: cca 870 kg Gumirani vstopni in izstopni valji Fsdpfxet U Rn So Abtogc Dvo-nožni valj z ravnimi rezili Centralno mazanje Višina skobljanja nastavljiva z ročnim kolesom Preklopno stikalo zvezda-trikot Lokacija: na zalogi 54634 Bitburg - takoj na voljo -

Stanje: novo, Leto izdelave: 2025, Martin panel saw T 77 – new stock machine – Fedpfxjw D T Dks Abtegc Top Features – Double-sided tilting – Equipment: - T 7710/2-a PREX saw unit, double-sided tilting - T 7725/2-a Cutting height 205 mm - T 7720/2-a Infinitely variable drive power 5.5 kW - T 7730/4-a Sliding table length 3.3 m - T 7735/3-a Cutting width 1350 mm - T 7743-a Electronically controlled parallel fence, can be lowered in end position - T 7755-a 3-axis scoring unit - T 7757-a Scorer lighting Safe Light - T 777572-a RadioCompens angle cutting system with continuous fence - T 7780/1-a Rear table extension 610 x 860 mm - T 7792/2-a Sensor monitoring for side-shiftable safety guard, 2 x 45 degrees - T 7704/2-a ConnectPad 12.9" / 13" - T 7704/20-a OtterBox Defender Case - T 7706/1-a ConnectApp at Classic operation level Location: ex stock 54634 Bitburg - available immediately -

Stanje: novo, Leto izdelave: 2025, Martin Thickness Planer T 45 with Tersa Cutterblock Accessories: 7.5 kW The T45 thickness planer offers the ideal conditions for modern production: Fgsdpfx Aboqlclbotjc It delivers cleanly planed surfaces, is quick and simple to operate, and works extremely quietly. The standard electronic control makes setting the planing height very easy thanks to 99 programmable planing dimensions, so that already the first workpiece fits perfectly. The thickness table can be moved at the push of a button or adjusted upwards in increments of 0.1 mm. The feed control switches are also conveniently located. The heavy, vibration-damping composite frame, together with the high-quality bearing of the cutterblock, ensures outstanding surface results. Thanks to the sound-dampening design, the machine already operates at low noise levels even in the standard version. • Planing width: 630 mm • Weight: approx. 1,200 – 1,400 kg • Planing height: 2.8 – 300 mm • Table length: 1,260 mm • Min. workpiece length: 270 mm • Spindle speed: 5,000 rpm • Operation: Single-axis control for planing dimensions; up to 99 values can be stored, 49 of which are available for a freely programmable sequence; push buttons for manual rapid and fine adjustment of the planing thickness through digital display, push buttons for cutterblock start/stop, integrated operating hours counter • Cutterblock: TERSA solid steel cutterblock Z4 Ø 125 mm; incl. lock for easy knife change • Thickness table: Electric thickness table adjustment with fine setting, traversing speed 10 mm/s, securely guided on 4 supporting spindles, finely planed table surface • Feed: 2 speeds 6 / 12 m/min, electrically selectable during planing, large rubber feed rollers Ø 85 mm to compensate for varying wood thicknesses, rubber rollers are gentle on material and self-cleaning, rollers can be changed easily; segmented pressure bar at the infeed • Extraction: Hinged, divided hood with chip extraction port Ø 160 mm, optionally connectable left/right (in special cases on both sides); minimum extraction air volume: 27 m³/min at 20 m/s • Maintenance equipment: Central lubrication strip for oil lubrication points; lubrication of bearings / cutterblock via nipples • Accessories: 1 grease gun filled with long-life grease 1 oil gun 1 open-ended spanner 1 tool for knife change 1 pair dummy knives 640 mm 2 pairs TERSA reversible knives 640 mm CV • Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (w/o extraction) P1 65 Idle noise (w/ extraction) P1 77 Operating noise (w/o extraction) P2 65 Operating noise (w/ extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (w/o extraction) 84 Operating noise (w/ extraction) 90 Dust emission: Low-dust according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Stanje: novo, Leto izdelave: 2025, Martin Spindle Moulder T 27 Flex – double-sided tilting – Flexibility for today and tomorrow. Setting up a tilting spindle moulder is usually a big challenge. Not with the T27 Flex and its modern touchscreen control: thanks to the integrated tool compensation, you can set up even complex moulding profiles with a tilted spindle in no time at all. This is how you can efficiently utilize the large tilt range of 2 x 46° – allowing you to completely cater to your requirements. Additionally, the machine can be precisely customized to the individual needs of your operation. Equipment: T 27 Flex T 2711-a Digital display of fence jaw position in the controller T 2731-a Table extension on both sides + extendable workpiece support T 2740-a Centrex guard T 2742-a Integral fence T 2743-a Auto Lock fence jaw clamping system T 2790-La Console for feed stand attachment, left side The photo shows a sample machine only / feed and support are not included Included items are detailed in the description Fjdpfer Hr D Njx Abtogc Location: Arriving at stock 54634 Bitburg – Available in two weeks –

Stanje: rabljeno, Leto izdelave: 1991, Upravljalna plošča v višini oči Aigner z integralnim prislonom, vključno s podajalcem s pomično sani (brez prislonskega ravnila). Frezerski prislon z digitalnim prikazom in mehanizmom za odklon. Lokacija skladišča: Nattheim. Fgedpfx Ajyi A Tdjbtoc

Stanje: rabljeno, Leto izdelave: 1982, Vključno s povsem novim stikalom zvezda-trikot (Stern-Dreieck-Schalter) rabljeno v dobrem stanju očiščeno preverjeno delovanje prenovljeno Fgjdpfxszbc D Hs Abtec Izdelovalec: Martin Tip: T23 Leto izdelave: 1982 Št. stroja: 82468 Motor, ojačana moč kW: 4,7 / 5,7 nagibno od do: 0 - 45 ° motorna / mehanska zavora: nožna zavora Motor, 2 hitrosti / preklopno število polov: da Število obratov/min: 3 / 4,5 / 6 / 9000 Možen obrat desno-levo: da Velikost mize d x š mm: 1100 x 950 Premer vretena za rezkanje mm: 30 Rezkalni naslon z natančno nastavitvijo: da Vtičnica za podajalni aparat: da Priključek za izpuh mm: 100 / 120 Potrebni prostor pribl. d x š x v mm: 1100 x 950 x 1100 Teža pribl. kg: 1000 Lokacija skladišča: 97447 Gerolzhofen, prosto naloženo, nezapakiran Predaja v obstoječem stanju kot ogledano brez garancije ali jamstva

Stanje: rabljeno, Leto izdelave: 1975, Technical Details: Swing diameter over bed: 400 mm Swing diameter over carriage: 220 mm Turning length: 1100 mm Centre height: 180 mm Spindle bore: Ø 45 mm Speed range: 31.5 - 1,400 rpm / 12 steps Feed range x-axis: longitudinal: 0.08 - 1.10 m/min Feed range y-axis: cross: 0.028 - 0.40 m/min Tailstock quill taper: MT4 Tailstock quill travel: 200 mm Total power requirement: 4.0 kW Machine weight approx.: 1.7 t Machine dimensions (LxWxH) approx.: 2.5 x 1.1 x 1.4 m Equipment: - Three-jaw chuck Ø 250 mm manufacturer Forkardt with exchangeable jaws - Multifix tool post - Coolant system with pump - Chuck guard - Chip tray - Splash guard Fodpfou Ix E Hox Abtogc Accessories: - Chuck key - Tool holder - 2 gears

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Robust tilting spindle moulder T 26, tiltable from -45 to +45 degrees Pole-changing drive motor 5 / 6 kW with automatic motor brake Forward/reverse operation Tilting angle electrically adjustable from -45 to +45 degrees Height adjustment max. 150 mm, electrically adjustable When adjusting the height, the correction factor for the tilt angle is shown in the top display and can then be set at the stop, allowing for settings based on drawings Four speeds: 3000, 4500, 6000 and 9,000 rpm Spindle diameter 30 mm, quick-change spindle with torque wrench Comfort fence T226 with digital displays for total adjustment and individual infeed jaw, as well as input for cutter diameter—in this case, the cutting depth is calculated automatically Fence with lifting device, swivels out of the way (for curve milling operations) Fedpfx Abezbm Tfetegc Table extensions left and right with pull-out workpiece support Support can be extended by 700 mm Table length approx. 2400 mm Fold-away fence for slot milling Workpiece pressure device Aigner Centrex Original Martin cast jaws left 500 mm, right 500 mm with two insert rulers 3-roller power feed HolzHer ET117, with 8 speeds, forward/reverse, new rollers Feeder socket can be switched from the control panel Comfort stand with electrically height-adjustable feeder support, which can be swung away for machine setup and then simply locked back in place. Extraction port 2 x 120 mm Compressed air connection 6 bar Emergency stop switch Some parts of the machine have been newly repainted (special colour RAL1015) V-belt replaced Operating manual CE mark Dimensions approx. 3000 x 1500 x 1830 mm (LxWxH). Weight approx. 1800 kg. The machine can be demonstrated on site by prior appointment. We only offer machines that are ready for demonstration in our warehouse; see “more offers from this supplier.”

Stanje: rabljeno, Leto izdelave: 1996, skupna dolžina: 3.900 mm, skupna širina: 2.100 mm, skupna višina: 1.520 mm, Weight: 1,500 kg - Year of manufacture: 1996 - Documentation available: No - CE marking present: Yes - CE certificate available: No - Serial number: V233567 - Roller table length [mm]: 3200 - Table width [mm]: 1300 - Min. saw blade diameter [mm]: 200 - Max. saw blade diameter [mm]: 450 Fgsdpfsxdlx Rex Abtsc - Saw blade bore diameter [mm]: 30 - Dust extraction nozzle diameter [mm]: 120 - Controlled axes: Tilting - Manually adjustable axes: Cutting height - Options: Scoring unit - └ Scoring blade diameter [mm]: 120 - └ Scoring blade bore diameter [mm]: 22 - Spindle speed: - └ Min. spindle speed [rpm]: 2800 - └ Max. spindle speed [rpm]: 5500 - └ Spindle speed adjustment: Stepped - Voltage [V]: 400 - Power consumption [A]: 13 - Fuse [A]: 16 - Transport dimensions: 3900mm x 2100mm x 1520mm (L x W x H) - Transport weight [kg]: 1500 kg - Number of transport packages: 1 Financial information VAT: The stated price is exclusive of VAT VAT/margin scheme: VAT deductible for businesses Delivery and trade-in possible at any time for all types of industrial equipment Yorick Diebels

Stanje: rabljeno, Martin Spindle Moulder -used- Fine-adjustable milling fence, reversible rotation (clockwise/counterclockwise) ----- Technical Data ----- Table size: 1,000 x 930 mm Working table height: 860 mm Spindle diameter: 40 mm Usable spindle length: 160 mm Max. cutter diameter: 255 mm Max. retractable cutter diameter: 255 mm Height adjustment: 150 mm Speeds: 3,000/4,500/6,000/9,000 rpm Motor: 4.7/5.7 kW Fjdpfx Aju R Td Nsbtogc Extraction port Ø: 120 mm Dimensions (LxWxH): 1,000 x 930 x 1,050 mm

Stanje: rabljeno, Skobeljni stroj MARTIN T51 - rabljeno - tihi robovi miz, vodilni trak, motorna zavora ----- Tehnični podatki ----- širina skobljanja: 51 mm, dolžina mize: 2.520 mm, maks. odvzem: 16 mm, Fgjdpfx Abjxm R Upetsc premer valja: 120 mm, število nožev: 2 kosa, nastavljiv kot vodila: 0-45°, priključek za odsesavanje: 140 mm, moč motorja: 4,8 kW

Stanje: rabljeno, Leto izdelave: 2002, Žagin list nagiben za 46° Dolžina vozička ~ 3.200 mm Fgsdpfoy Spv Ejx Abtjc Širina reza ~ 1.100 mm Največja višina reza 170 mm Največji premer žaginega lista 500 mm Moč motorja 5,5 kW Zarezni agregat 0,75 kW Formatna krožna žaga Martin tip T 73 Classic za natančno razrezovanje masivnega lesa, ploščnih materialov in prevlečenih materialov z nagibnim žaginim listom in zarezovalnikom. Stroj omogoča natančne vzdolžne, prečne in poševne reze ter je zasnovan za vsakodnevno uporabo v profesionalni obdelavi lesa. Vključno z obsežno zalogo žaginih listov.

Stanje: rabljeno, Leto izdelave: 1978, Swivelling spindle: Yes, 0 - 45° Height adjustment: Handwheel Swivel adjustment: Handwheel Cutter jaw adjustment: manual Height display: - Swivel angle display: Scale Fence scale display: Scale Spindle diameter: 30 mm Speeds: 3000, 4500, 6000, 9000 rpm Fjdpfsuzkxfox Abtsgc Motor power: 5 kW Motor brake: Yes, foot brake Extraction port: 2 x 100 mm Machine length: 1200 mm Machine depth: 1400 mm Weight: 800 kg

Stanje: rabljeno, Leto izdelave: 1981, Delovna širina: 510 mm Skobeljni valj: segmentno rezilo Število nožev: 2 Dolžina poravnalne mize: 2600 mm Nastavitev poravnalne mize: hidravlično / nožni pedal Nastavitev konkavno-konveksnega spoja: da Prikaz odstranitve ostružkov: skala Prikaz konkavno-konveksnega spoja: skala Kot paralelnega prislona nastavljiv: da Fsdpfey Hqdgex Abtegc Moč motorja: 5,5 kW Zavoro motorja: da, avtomatska Dolžina stroja: 2600 mm Širina stroja: 1000 mm Teža: 1050 kg

Stanje: rabljeno, Leto izdelave: 1997, Vreteno z možnostjo nagiba: Da, od -5 do 45° Nastavitev višine: električna Nastavitev nagiba: električna Odpiranje mize: električno Nastavitev prislona: ročna Prikaz višine: digitalni Prikaz kota nagiba: digitalni Prikaz rezkalnega prislona: digitalni Premer vretena: 30 mm Število obratov: 3000, 4500, 6000, 9000 Priključna moč: 5 / 6 kW Motorna zavora: Da, avtomatska Priključek za odsesavanje: 2 x 120 mm Dolžina stroja: 2500 mm Širina stroja: 1400 mm Teža: 1100 kg Fedpfx Absy Hqd Hstogc