Martin nakup rabljenega (88)

Stanje: rabljeno, Panel Saw Martin T 60 Heavy-Duty Precision Panel Saw Axis positioning control with 5.7" touch screen Automatic scoring unit Motor power: 5.5 kW Saw blade tilting 0 - 46° Maximum saw blade diameter: 400 mm Cutting length: 3000 mm Cutting width with parallel fence: 1250 mm Automatic width adjustment of parallel fence via NC control Parallel fence reading via touch screen Swiveling control console above the table Kjdpfx Asxx R T Nsf Noll CE-certified The machine is WORKSHOP-REFURBISHED and in EXCELLENT CONDITION Available from stock in Lieboch

Stanje: dober (rabljeno), Namizna rezkalna naprava Proizvajalec: Martin Tip: N.A. Leto izdelave: N.A. Levo-desni tek: Da Število vrtljajev: 3.000 / 4.500 / 6.000 / 9.000 obr./min Klodpsya Ddrofx Af Nol 30 mm vreteno Mehanska nožna zavora Vključuje: - Trovaljni podajalnik - Ustavljalne čeljusti Aigner

Stanje: zelo dobro (rabljeno), Leto izdelave: 1984, Martin Miniline 616 - Vakuumski podajalnik - hhs lepilni sistem Kledpex N H R Usfx Af Nsl - Maks. hitrost: 15.000 listov/uro - Maks. velikost: 600x1600 mm - Leto: 1984 - 4-barvni flexotisk s sistemom za rakle in keramičnimi valji - Samodejni slotter - Rotacijsko izsekovanje - Zlaganje in lepljenje - Števec-izmetalnik - Mosca stroj za povezovanje, leto 2006

Stanje: rabljeno, Leto izdelave: 1991, Rabljeni stroj Leto izdelave: 1991 Oprema in tehnični podatki: - Stanje: vzdrževan - Dviganje/spuščanje in nagibanje 0-45° s hidravlično nožno stopalko - S finim in hitrim pomikom, vse brez vzdrževanja - Z digitalnim prikazom na krožni žagi za širino reza - Z nastavitvijo fiksnega kota na dolžinskem omejevalniku za 75/67,5/60/45 stopinj - Višina reza: 145 mm - Širina reza: 1050 mm Kjdpfx Afex Enq Io Noll - Dolžina reza: 3300 mm - Vrtljaji: 2800-4000-5500 obr/min - Motor: 5,5 kW - S predrezovalno enoto Razpoložljivost: takoj Lokacija: Röllbach

Stanje: zelo dobro (rabljeno), KATALOŠKA ŠTEVILKA 6607 TEHNIČNI PODATKI Krožna žaga: - maks. premer žaginega lista: 350 mm - vreteno: 30 mm - blokirano vreteno - list nastavljiv naprej/nazaj, gor/dol - zaščita za list - motor: 1,1 kW - premer izsesovalnega nastavka: 80 mm Rezkalni stroj: čepilno vreteno: - premer vretena: 40 mm - delovna višina vretena: 140 mm - blokirano vreteno - maks. premer rezkalnika: 350 mm - 2 hitrosti vrtenja: 3000, 4500 obr/min - motor: 5,5 kW - zavorni sistem - stranski voziček – ročni pomik - dimenzije vozička dolž/šir: 1180x600 mm - kotno vodilo - 2x pnevmatski pritiskač Klodpfex Sq Aaex Af Nol - premer izsesovalnih priključkov: 120 mm - dimenzije dolž/šir/viš: 2600 (za pošiljanje 2000)/1600/1450 mm - teža: 735 kg – zelo dobro ohranjeno – rabljeni čepilni stroj Neto cena: 13.900 PLN Neto cena: 3.300 EUR – odvisno od tečaja 4,2 EUR (Cene se lahko spremenijo v primeru večjih nihanj)

Stanje: novo, Leto izdelave: 2024, Martin Thickness Planer T45 with XPLANE Cutterhead The T45 thickness planer offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and simple to operate, and works extremely quietly. The standard electronic control unit allows you to store up to 99 planing dimensions, making height adjustment for planing exceptionally easy—your first workpiece will already fit perfectly. Of course, the thickness table can be moved either by a simple press of a button or incrementally in 0.1 mm steps. The feed rate controls are conveniently within reach. The heavy-duty, vibration-damping composite frame combined with the precision-mounted cutterhead guarantees excellent surface results. Thanks to the sound-insulated construction, even the standard version operates quietly. • Planing width: 630 mm • Weight: approx. 1,200 – 1,400 kg • Planing height: 2.8 – 300 mm • Table length: 1,260 mm • Minimum workpiece length: 270 mm • Spindle speed: 5,000 rpm • Operation: 1-axis controller for planing dimensions, up to 99 values storable, 49 freely programmable for custom planing sequences; buttons for manual quick/fine adjustment of planing thickness with digital readout; push-buttons for cutterhead start/stop; built-in operating hours counter • Cutterhead: Solid steel Xplane cutterhead Cutterhead with 3 helical knife rows (33 curved carbide knives per row); delivery includes full set of knives and a Torx T20 wrench; spindle speed 6,000 rpm included; The emission sound pressure level LpA during machining is reduced by 10 dB(A) • Thickness Table: Electric table adjustment with fine setting, travel speed 10 mm/s, securely mounted on 4 supporting spindles, finely planed table surface • Feed: 2 speeds, 6 / 12 m/min, electrically selectable even during operation; large rubber feed rollers Ø 85 mm for compensation of varying wood thicknesses; rubber rollers are gentle on material and self-cleaning, rollers easily replaceable; segmented infeed pressure bar • Extraction: Pivotable, split extraction hood with chip extraction port Ø 160 mm, optionally connectable left/right (both sides possible in special cases); minimum extraction airflow: 27 m³/min at 20 m/s • Maintenance: Central lubrication strip for oil points; lubrication of bearings/cutterhead via grease nipples • Accessories: 1 grease gun pre-filled with long-life grease, 1 oil can, 1 open-ended wrench, 1 tool for knife changing, 1 pair of dummy knives 640 mm, 2 pairs of TERSA reversible knives 640 mm CV • Emission values: Workplace emission sound pressure level LpA according to DIN EN ISO 11202 [dB(A)] Idle sound (without extraction) P1 65 Idle sound (with extraction) P1 77 Operating sound (without extraction) P2 65 Operating sound (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle sound (without extraction) 84 Operating sound (with extraction) 90 Kledpfx Aoqlck Nof Njl Dust emission: Low-dust per DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2024, Martin Thickness Planer T 45 with Tersa Cutterhead The T45 thickness planer provides ideal conditions for modern manufacturing: It delivers cleanly planed surfaces, is quick and simple to operate, and also works extremely quietly. The standard electronic control with 99 stored planing dimensions makes height adjustment so easy that even the very first workpiece fits perfectly. Naturally, the thickness table can be moved at the push of a button or incrementally adjusted upwards in 0.1 mm steps. The feed control elements are also conveniently within reach. The heavy, vibration-damping composite base combined with the high-quality cutterhead bearings guarantees outstanding surface quality. Thanks to the sound-insulated construction, the standard version already operates with low noise emissions. • Planing width: 630 mm • Weight: approx. 1,200 - 1,400 kg • Planing height: 2.8 - 300 mm • Table length: 1,260 mm • Minimum workpiece length: 270 mm • Speed: 5,000 rpm • Controls: Single-axis control for planing dimension, up to 99 values storable, 49 of which can be used in a freely programmable planing sequence; buttons for manual rapid and fine adjustment according to digital display, pushbuttons for cutterhead start/stop, integrated operating hour counter • Cutterhead: TERSA solid steel Z4 Ø 125 mm; with lock for easy knife change • Thickness table: Electric adjustment with fine setting, travel speed 10 mm/s, four supporting spindles for tilt-free stability, precision-planed table surface • Feed: 2 speeds – 6 / 12 m/min, electrically selectable during operation; large rubber feed rollers Ø 85 mm for compensating varying timber thicknesses, gentle on material and self-cleaning, easy roller change; sectional pressure bar at infeed • Extraction: Swiveling, split hood with chip extraction port Ø 160 mm, connectable on left or right (dual-sided in special cases); minimum extraction airflow: 27 m³/min at 20 m/s Klsdpsqlckpefx Af Nsl • Maintenance system: Central lubrication rail for oil points; lubrication of bearings/cutterhead via nipple • Accessories: 1 grease gun (filled with long-life grease) 1 oil gun 1 open-ended wrench 1 tool for knife change 1 pair of dummy knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV • Emission values: Emission sound pressure level at workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (with extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Low-dust emissions according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Stanje: dober (rabljeno), Leto izdelave: 1982, Rabljeni debelinski skobeljni stroj Gebr. Martin, tip: T 42 Leto izdelave: 1982 Širina skobljanja: 630 mm Višina skobljanja: 250 mm Podajalna hitrost: 8-20 m/min Sesalni priključek: 160 mm Teža: cca 870 kg Kjdpfx Ajt U Rn Sjf Njll Gumirani vstopni in izstopni valji Dvo-nožni valj z ravnimi rezili Centralno mazanje Višina skobljanja nastavljiva z ročnim kolesom Preklopno stikalo zvezda-trikot Lokacija: na zalogi 54634 Bitburg - takoj na voljo -

Stanje: novo, Leto izdelave: 2024, Martin T 54 Surface Planer Only with a high-quality surface planer can you achieve truly perfect foundational work. The T54 was developed precisely with this objective in mind. It allows you to effortlessly dress workpieces at the highest modern standards and accurately apply angled edges. The machine comes standard with a TERSA solid steel cutterblock. The Xplane cutterblock with a shearing cut is available as an optional extra. Chamfer planing is handled with ease, as the user-friendly single-lever adjustment allows you to quickly set any angle between 90° and 45°. The robust cast iron tables of the T54 provide a stable support, even for large and heavy workpieces. Should you require even more support surface, both the infeed and outfeed tables can be extended by 380 mm each – also in cast iron, of course. Technical Data: Table width: 500 mm Table length: 2,840 mm Maximum depth of cut: 8 mm Cutterblock: 125 mm diameter, 5,000 rpm, Tersa Z4 Speed: 5,000 rpm Motor power: 5.5 kW Kodpspgkmwsfx Af Noll Fence adjustable up to 45° Auxiliary fence for small workpieces Motorized table adjustment Features: T 54 T 5462-a Suvamatic T 541-a Tersa 4-knife cutterblock Location: In stock, 54634 Bitburg - available immediately -

Stanje: novo, Leto izdelave: 2025, Surface Planer Martin T 54 Only with a high-quality surface planer can you truly achieve the perfect foundation. The T54 was developed precisely with this goal in mind. It enables you to easily plane workpieces at the most modern standards and safely fit them with accurate angled edges. The machine comes as standard with a TERSA solid steel cutter block. The Xplane cutter block with shear-cut action is available as an option. Chamfering is effortless, as the user-friendly single-handed adjustment allows any angle between 90° and 45° to be quickly set. The robust cast iron tables of the T54 provide a secure platform, even for large and heavy workpieces. If additional support surface is required, both the infeed and outfeed tables can be extended by 380 mm each—also made of cast iron, of course. Technical Data Table width: 500 mm Klodpfxopq If De Af Nel Table length: 2840 mm Maximum cutting depth: 8 mm Cutter block: diameter 125 mm, 5000 rpm, Tersa Z4 Rotation speed: 5000 rpm Motor power: 5.5 kW Fence adjustable up to 45° Auxiliary fence for small workpieces Electrically driven table adjustment Equipment: T 54 T 5462-a Suvamatic T5406/3-a solid steel Xplane cutter block with 3 spiral knife rows (each row with 26 domed carbide knives; 2 counter knives), includes full knife set and a Torx T20 T-wrench; spindle speed 6,000 rpm included. The emission sound pressure level LpA during operation is reduced by 8 dB(A). Location: ex-stock 54634 Bitburg - immediately available -

Stanje: novo, Leto izdelave: 2025, Martin Panel Saw T 66 Cutting height: 155 mm Saw blade diameter: 450 mm Tiltable: one side Drive power: 5.5 kW Kljdev Erkaopfx Af Nel Sliding table length: 3.0 m Cutting width: 1350 mm Rip fence adjusted by handwheel Standard crosscut table with length stop for angle cuts Analog length stop with continuous fence Rear table extension T66 T6615/2-a Drive power 5.5 kW T6630/3-a Sliding table length 3.0 m T 6635/3-a Cutting width 1350 mm T 6641-a Rip fence moved by handwheel T6660/1-a Standard crosscut table for angle cuts T 6670-a Analog length stop T 6680/1-a Rear table extension Location: ex-stock 54634 Bitburg - immediately available - Some of the options shown in the photos are not included in the offer.

Stanje: novo, Leto izdelave: 2025, Martin panel saw T 77 – new stock machine – Top Features – Double-sided tilting – Equipment: - T 7710/2-a PREX saw unit, double-sided tilting - T 7725/2-a Cutting height 205 mm - T 7720/2-a Infinitely variable drive power 5.5 kW - T 7730/4-a Sliding table length 3.3 m - T 7735/3-a Cutting width 1350 mm Kjdsw D T Dkspfx Af Nsll - T 7743-a Electronically controlled parallel fence, can be lowered in end position - T 7755-a 3-axis scoring unit - T 7757-a Scorer lighting Safe Light - T 777572-a RadioCompens angle cutting system with continuous fence - T 7780/1-a Rear table extension 610 x 860 mm - T 7792/2-a Sensor monitoring for side-shiftable safety guard, 2 x 45 degrees - T 7704/2-a ConnectPad 12.9" / 13" - T 7704/20-a OtterBox Defender Case - T 7706/1-a ConnectApp at Classic operation level Location: ex stock 54634 Bitburg - available immediately -

Stanje: novo, Leto izdelave: 2025, Martin Spindle Moulder T 27 Flex – double-sided tilting – Flexibility for today and tomorrow. Setting up a tilting spindle moulder is usually a big challenge. Not with the T27 Flex and its modern touchscreen control: thanks to the integrated tool compensation, you can set up even complex moulding profiles with a tilted spindle in no time at all. This is how you can efficiently utilize the large tilt range of 2 x 46° – allowing you to completely cater to your requirements. Additionally, the machine can be precisely customized to the individual needs of your operation. Kljdpfor Hr D Njx Af Nel Equipment: T 27 Flex T 2711-a Digital display of fence jaw position in the controller T 2731-a Table extension on both sides + extendable workpiece support T 2740-a Centrex guard T 2742-a Integral fence T 2743-a Auto Lock fence jaw clamping system T 2790-La Console for feed stand attachment, left side The photo shows a sample machine only / feed and support are not included Included items are detailed in the description Location: Arriving at stock 54634 Bitburg – Available in two weeks –

Stanje: novo, Leto izdelave: 2025, Martin Thickness Planer T 45 with Tersa Cutterblock Accessories: 7.5 kW The T45 thickness planer offers the ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and simple to operate, and works extremely quietly. The standard electronic control makes setting the planing height very easy thanks to 99 programmable planing dimensions, so that already the first workpiece fits perfectly. The thickness table can be moved at the push of a button or adjusted upwards in increments of 0.1 mm. The feed control switches are also conveniently located. The heavy, vibration-damping composite frame, together with the high-quality bearing of the cutterblock, ensures outstanding surface results. Thanks to the sound-dampening design, the machine already operates at low noise levels even in the standard version. • Planing width: 630 mm • Weight: approx. 1,200 – 1,400 kg • Planing height: 2.8 – 300 mm • Table length: 1,260 mm • Min. workpiece length: 270 mm • Spindle speed: 5,000 rpm • Operation: Single-axis control for planing dimensions; up to 99 values can be stored, 49 of which are available for a freely programmable sequence; push buttons for manual rapid and fine adjustment of the planing thickness through digital display, push buttons for cutterblock start/stop, integrated operating hours counter • Cutterblock: TERSA solid steel cutterblock Z4 Ø 125 mm; incl. lock for easy knife change • Thickness table: Electric thickness table adjustment with fine setting, traversing speed 10 mm/s, securely guided on 4 supporting spindles, finely planed table surface • Feed: 2 speeds 6 / 12 m/min, electrically selectable during planing, large rubber feed rollers Ø 85 mm to compensate for varying wood thicknesses, rubber rollers are gentle on material and self-cleaning, rollers can be changed easily; segmented pressure bar at the infeed • Extraction: Hinged, divided hood with chip extraction port Ø 160 mm, optionally connectable left/right (in special cases on both sides); minimum extraction air volume: 27 m³/min at 20 m/s Klodpfx Afoqlclbe Nol • Maintenance equipment: Central lubrication strip for oil lubrication points; lubrication of bearings / cutterblock via nipples • Accessories: 1 grease gun filled with long-life grease 1 oil gun 1 open-ended spanner 1 tool for knife change 1 pair dummy knives 640 mm 2 pairs TERSA reversible knives 640 mm CV • Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (w/o extraction) P1 65 Idle noise (w/ extraction) P1 77 Operating noise (w/o extraction) P2 65 Operating noise (w/ extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (w/o extraction) 84 Operating noise (w/ extraction) 90 Dust emission: Low-dust according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Stanje: rabljeno, Leto izdelave: 1994, Unladen weight: 2,400 kg Dimensions (L x W x H): 470 x 170 x 162 cm Price: On request - Year of manufacture: 1994 - Documentation available: No - CE certificate available: No - Serial number: V 218286 - Number of spindles [pcs.]: 6 - Spindle 1: - Spindle type: Horizontal spindle - Motor power [kW]: 5.5 - Spindle diameter [mm]: 125 - Cutterhead speed [rpm]: 6,000 - Spindle 2: - Spindle type: Vertical spindle - Motor power [kW]: 5.5 - Spindle diameter [mm]: 125 - Cutterhead speed [rpm]: 6,000 - Spindle 3: - Spindle type: Horizontal spindle - Motor power [kW]: 5.5 - Spindle 4: - Spindle type: Horizontal spindle - Spindle diameter [mm]: 40 - Spindle 5: - Spindle type: Vertical spindle - Motor power [kW]: 5.5 - Spindle diameter [mm]: 40 - Spindle 6: - Spindle type: Universal - Motor power [kW]: 7.5 - Spindle diameter [mm]: 40 - Min. planing width [mm]: 22 Kljdpfx Afox Adxye Njl - Max. planing width [mm]: 260 - Min. planing height [mm]: 5 - Max. planing height [mm]: 160 - Feed motor [kW]: 5.5 - Extraction nozzle diameter [mm]: 250 - Transport dimensions: 4,700 mm x 1,700 mm x 1,620 mm (l x w x h) - Transport weight [kg]: 2,400 kg - Number of transport packages [pcs.]: 1 Financial information: VAT: The stated price is net, VAT excluded VAT/margin scheme: VAT deductible for businesses Delivery and trade-in possible at any time for all items from the industrial sector Yorick Diebels

Stanje: rabljeno, Electrode holder with air connection for electrode device, electrode welding machine, gouging tool, electrode holder Kljdpfxocf Dhuo Af Njl - Suitable for: carbon arc process - Cable length: 2.5 m - Dinse connector - Air connection - Quantity: 2 cables available - Price: per piece - Weight: 4 kg

Stanje: dober (rabljeno), Leto izdelave: 1961, Težki stružnica, stružnica, stružniška postelja, stružnica z vodilom in vijačno gredjo, stružniška postelja z vodilom in vijačno gredjo - Stanje postelje stroja: zelo dobro stanje - Postelja stroja: kaljena - Proizvajalec: Martin, stružnica z vodilom in vijačno gredjo tip DLZ 502 - Dolžina struženja: 2200 mm - Premer struženja nad posteljo: 580 mm - Premer struženja nad suportom: 300 mm - Vreteninska odprtina: Ø 65 mm - Vretena hitrost: 22,4 - 1000 min⁻¹ - Klinasta vpenjalna glava: Forkardt Ø 320 mm Kodpfxowfpile Af Njll - Konica konjička: MK5 - Pogon: 7,5 kW - Oprema: 4x lunete, držalo za orodje, orodja glej slike - Dimenzije: 1260/3720/H1260 mm - Teža: 2510 kg

Stanje: dober (rabljeno), Leto izdelave: 1981, Spindle moulder, table milling machine, wood milling machine - Manufacturer: Martin, table milling machine type T 21 with table extension - Milling spindle: mount Ø 30 mm - Speeds: 3 rpm - Overall dimensions: 1620/1060/H1120 mm Ksdownbfkopfx Af Noll - Total weight: 698 kg

Leto izdelave: 1979, Stanje: dober (rabljeno), Underslung circular saw, cross-cut saw, pull saw, chop saw, panel saw, table saw, aluminium circular saw, panel sizing saw -Manufacturer: Martin, panel saw model T 70 with automatic feed -Motor power: 11 kW -Speed: 1445 rpm Klodshfufgjpfx Af Nel -Saw blade: Ø 410 x 5 mm -Max. cutting height: 140 mm at 90° / 110 mm at 45° -Mitre cut: up to 45° -Sliding table: 355 x 1500 mm -Overall dimensions: 2275/2010/H1400 mm -Weight: 1058 kg

Stanje: rabljeno, Leto izdelave: 2003, Proizvajalec: Martin Christ Gefriertrocknungsanlagen GmbH Model: EPSILON 2-6D Leto: 2003 Tip: Laboratorijski in pilotni liofilizator (freeze-dryer) Uporaba: Sušenje trdnih ali tekočih vzorcev v vialah, steklenicah, ampulah, prirobnicah, pladnjih ipd. Primeri izdelkov: - Biološki proizvodi: bakterije, virusi, tkiva, rastlinski ekstrakti - Farmacevtski proizvodi: plazma, serum, protitelesa, cepiva - Biokemijske analize - Živilski izdelki: fermente, vitamine Splošni podatki: - Predzamrzovanje, liofilizacija (sublimacija) in končno sušenje - Delovanje pod vakuumom, < -10°C - 3 + 1 police - Površina polic: 0,3 m² - Razmak med policami: 68 mm - Programska oprema: SCADA - Čistilna prirobnica Kljdpfox R Dlfex Af Njl - Sistem za ekstrakcijo vzorcev - Ročna zapirala za viale Ledni kondenzator: - Kapaciteta: 8,0 kg - Zmogljivost: 6,0 kg / 24 h - Temperatura: -75°C Dimenzije: - Širina: 800 mm - Globina: 840 mm - Višina: 1640 mm - Teža: cca 650 kg Energetski podatki: - Napajanje: trifažno, 400 V / 50 Hz - Poraba energije: maks. 5,0 kVA - Najvišja temperatura okolice: +25°C Hladilno sredstvo: - Tipi: R404A, R508, Isceon 89 - Toplotni prenosni medij: Syltherm XLT Tehnične priključitve: - Priklop tople vode: ½" cevni priklop - Izpust vode za odtajanje: ½" cevni priklop - Vakuumski izpuh: cev iz nerjavečega jekla, DN 25 - Prezračevanje: priklop DN 6 Ostalo: - Na voljo dokumentacija in kvalifikacije - Prodano skupaj z računalnikom LPC plus za analizo podatkov - Rezervni deli

Stanje: dober (rabljeno), Leto izdelave: 1987, Martin Transline 1228 Maks. dimenzija: 2800x1260 mm Klsdpox H Nbwofx Af Nel Maks. hitrost: 12.000 listov/uro Avtomatski podajalnik 2-barvni fleksotisk, leto 1987 Avtomatski slotter, leto 2000 Rotacijsko izsekovanje, leto 1987 Postaja za zgibanje Lepilni sistem hhs Taper-Rapidex Stroj za povezovanje Signode, leto 2000 Paletizator Martin, leto 2000

Stanje: rabljeno, Namizni rezkar MARTIN T21 - rabljen - fino nastavljivo rezkarsko vodilo, smer vrtenja desno/levo ----- Tehnični podatki ----- Velikost mize: 1.000 x 930 mm, Premer vretena: 30 mm, Nastavitev višine: 150 mm, Klsdew Nv Nlopfx Af Nel Hitrosti: 3.000/4.500/6.000/9.000 obr/min, Premer odsesovalnega nastavka: 120 mm, Teža: 630 kg

Stanje: rabljeno, Martin Spindle Moulder -used- Fine-adjustable milling fence, reversible rotation (clockwise/counterclockwise) ----- Technical Data ----- Table size: 1,000 x 930 mm Working table height: 860 mm Spindle diameter: 40 mm Usable spindle length: 160 mm Max. cutter diameter: 255 mm Max. retractable cutter diameter: 255 mm Height adjustment: 150 mm Speeds: 3,000/4,500/6,000/9,000 rpm Kjdpfx Afsu R Td Ns Noll Motor: 4.7/5.7 kW Extraction port Ø: 120 mm Dimensions (LxWxH): 1,000 x 930 x 1,050 mm

Stanje: rabljeno, Skobeljni stroj MARTIN T51 - rabljeno - tihi robovi miz, vodilni trak, motorna zavora ----- Tehnični podatki ----- širina skobljanja: 51 mm, dolžina mize: 2.520 mm, Kljdpfoxm R Upjx Af Nel maks. odvzem: 16 mm, premer valja: 120 mm, število nožev: 2 kosa, nastavljiv kot vodila: 0-45°, priključek za odsesavanje: 140 mm, moč motorja: 4,8 kW

Stanje: rabljeno, Leto izdelave: 1990, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: V178451, širina skobljanja: 500 mm, skupna dolžina: 2.900 mm, skupna višina: 1.200 mm, skupna širina: 1.000 mm, skupna masa: 1.000 kg, dolžina mize: 2.900 mm, odstranjevanje ostružkov pri površinskem obdelovanju (max.): 8 mm, delovna širina: 500 mm, dolžina mize rezkalnega stroja: 1.640 mm, vhodna napetost: 380 V, moč: 5,5 kW (7,48 KM), potrebna širina: 1.000 mm, zahteva za prostor dolžina: 2.900 mm, potrebna višina: 1.200 mm, vrsta nastavitve višine: hidravlični, Oprema: motorna zavora, We offer this used Otto Martin T 53 jointer planer, year of manufacture 1990. MARTIN Jointer Planer T53 Description: For sale is a MARTIN jointer planer T53. The machine is no longer needed and is therefore being sold. Technical Specifications: • Planing width: 50 cm • Infeed table: 164 cm • Outfeed table: 120 cm • Max. cutting depth: 8 mm • Operating voltage: 380V • Motor: 5.5 kW • Cutterblock for strip planer knives • Automatic motor brake • Slotted, low-noise table lips • Hydraulic table adjustment • Hollow/point joint adjustment (hohl-spitzfugeneinstellung) • Digital display for cutting depth, LED (not functional) • Digital display for hollow/point joint, LED (not functional) • Aigner tilting fence 45° with extendable rail • Footprint approx. LxWxH mm 2900 x 1000 x 1200 • Weight: 1000 kg • Year of manufacture: 1990 Klsdox R Ttfopfx Af Nsl Condition: The machine is operational and ready for use. Note: The LED displays are unfortunately non-functional. All other functions work perfectly. Inspection & Collection: Inspection possible by appointment. Collection on site. An invoice with VAT will be issued. If you have any questions or require further information, please feel free to send us a message or call us.