Stroji za raziganje pločevine nakup rabljenega (97)

Stanje: novo, Condition: new Delivery time: approx. 12 weeks from order Country of origin: Italy Price: €153,200 Leasing rate: €2,895.48 Working width: 1350 mm Sheet thickness range – mild steel: 0.4 – 120 mm Abrasive belt dimensions: 1370 x 2200 mm Extraction capacity: 6000 m³/h Connection for extraction: Diameter 150 mm Compressed air connection: 6 bar Length: 4200 mm Width: 2300 mm Height: 2350 mm Weight: 4200 kg WITH 2 WORKING UNITS: 1 X ABRASIVE BELT AND 1 X BRUSH UNIT ABOVE * The machine is built from welded and normalized steel to ensure a stable and rigid structure. * Worktable with motorized height adjustment enabled by synchronized movement of 4 screws. * Independent motors with emergency brakes integrated within the machine frame. * Dust extraction hoods within the machine. The control panel includes: * Automatic star-delta starter for main motors * Digital display for material thickness with decimal accuracy * Thickness adjustment with control (+/- 0.1) * Alarm control center for immediate visualization of emergencies and/or faults. FEED UNIT * Table constructed of a solid metal structure with a ground and wear-resistant gliding surface. * Modified structures for vacuum systems available on request * Table lifts and lowers from 780 mm to a maximum height of 950 mm above floor level. Table height adjustment motor output: 0.25 kW. * Maximum permissible load on the table: 140 kg. * Variable feed speed via inverter from 0.4 to 4.5 m/min, optional: 0.2 to 2.0 m/min or 0.6 to 6.0 m/min. * Conveyor belt made of special natural rubber, oil- and heat-resistant, with automatic centering system. * Side guides preventing the conveyor from lifting. * Rubberized pressure rollers, oil- and heat-resistant, fitted before and after each working unit. * Automatic centering device for the conveyor belt * Automatically servo-cooled motor * Speed motor displayed on the main touchscreen 1ST DEBURRING UNIT WITH ABRASIVE BELT * Rectified and balanced contact roller, 180 mm diameter. Coated with oil- and heat-resistant nitrile rubber. Standard roller hardness 55° Shore. Mounted on an eccentric shaft, allowing control of working position and compensation for abrasive belt wear, up to 8 mm. This system is controlled by a pneumatic cylinder which enables the group to be engaged automatically and, in the event of an emergency and/or machine stop, allows immediate withdrawal of the belt from the working area. Abrasive belts and/or Scotch-Brite can be mounted. * Pneumatic ON/OFF switch. Gbodpfx Agjynmw Rjyji * Roller adjustment up/down ("grain" stroke 10 mm) * Variable speed motor 11 kW with automatic braking in case of emergency. * Rotational speed in feed direction: 4 – 18 m/s. * Adjustable width and duration of oscillation. * Pneumatic abrasive belt tensioning system. LED indicator for wear control. * Abrasive belt centering system with electronic photo cell indicator; amplitude and intensity of oscillation adjustable. 2ND ROTARY BRUSHING UNIT * Consisting of 8 deburring brushes, 4 rotating clockwise and 4 counterclockwise. * Each brush has a diameter of 350 mm and...

Stanje: novo, Condition: New Delivery time: approx. 12 - 14 weeks from order Country of origin: Italy Price: €74,000 Leasing rate: €1,398.60 Working width: 1,350 mm Sheet thickness range (mild steel): 0.5 - 170 mm Abrasive belt dimensions: 1,370 x 2,200 mm Extraction capacity: 4,000 m³/h Extraction connection: diameter 200 mm Compressed air connection: 6 bar Noise level: 78 (+/-2) dB Length: 1,750 mm Width: 2,100 mm Height: 2,180 mm Weight: 2,000 kg EQUIPPED WITH 2 WORKING STATIONS: 1 x ABRASIVE BELT AND 1 x TOP BRUSH UNIT Machine made of stress-relieved steel welded construction for stable and rigid structure. Worktable with motorized height adjustment via 4 synchronized spindles. Independent drive motors for each working station. Extraction hoods inside the machine, one per station. Touch screen for * Automatic star-delta switching of main motors * Analog ammeter for each station * Digital sheet thickness display with decimal point tolerance * Material thickness setting (+/- 0.1 mm) * Machine status monitoring with alarm messages FEED SYSTEM Robust steel structure, wear-resistant surface. Vacuum conveyor belt available on request. Variable feed speed via frequency inverter, 0.6 to 6.5 m/min. Rubber conveyor belt, oil and temperature resistant. Automatic conveyor belt centering. Side guides to prevent the belt from lifting. Rubber pressure rollers before and after each station, oil and temperature resistant. Idler rollers at the front and rear of the table. 1st WORKING STATION – R Balanced contact roller, anti-oil and anti-heat nitrile rubber coating. Adjustable via eccentric shaft for working position and compensation of abrasive belt wear. Pneumatic cylinders for automatic engagement in working position and lifting during emergency stop. Abrasive belts and/or Scotch-Brite can be used. Motorized adjustment and electronic control of contact roller height. Variable-speed motor with automatic emergency brake. Pneumatic belt tensioning system. Abrasive belt centering system with electronic photo cell. Oscillation adjustment for width and timing. Contact roller adjustment precision: ±0.02 mm Contact roller adjustment speed: 10 m/min Contact roller diameter: 180 mm Rubber roller hardness: 55 Shore Contact roller stroke (grit adjustment) up/down: 8 mm Abrasive belt speed: 3 – 18 m/s Motor power: 11 kW 2nd WORKING STATION – X 2 rows of vertical brushes, 10 rotating clockwise and 10 counterclockwise Oscillating cross movement of the whole group Quick-change system for brushes Brush diameter: 115 mm Number of brushes: 20 pcs Oscillation stroke: 15 mm Rotational motor power: 5.5 kW Rotational speed: 300 – 1000 rpm Oscillation motor power: 0.37 kW Abrasive brush speed: 10.0 m/s OPTIONS AND ACCESSORIES B Group – External horizontal drum brush Ø 150 mm Gjdpfxsynmwks Agysbi over Scotch-Brite brush: €5,580.00 over wire brush 0.3 mm: €5,900.00 R Group – ABRASIVE BELT Motor 15 kW: €1,060.00 OPTIONS: Return to Sender system (workpiece is discharged to the front): €1,290.00 Conveyor belt with vacuum system, 300 mm wide, 4.0 kW: €4,780.00 2 additional PVC-coated rollers at infeed and outfeed sides: €2,040.00 Tampico brush system for component cleaning, 0.55 kW, Ø 150 mm: €4,5...

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, obratovalne ure: 80 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2623-43, delovna širina: 1.100 mm, najv. debelina jeklene pločevine: 100 mm, Stroj za obdelavo robov Timesavers 32 WRBW - Demo stroj, letnik 2025 Gbodpfx Aeytr Hnogyei - Vakuumska miza za obdelavo mešanih materialov - Avtomatsko čiščenje mize - Agregat za odstranjevanje srha - Agregat za zaoblovanje robov - Agregat za ustvarjanje končne obdelave - Lahko se ponudi kot celoten sistem z odsesavanjem - Namestitev in usposabljanje izvede lasten servisni kader

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, Splošni podatki Mere širina 1400 mm Gbodpfsx D Sbxox Agyei Mere globina 3100 mm Mere višina 1800 mm Teža stroja 2300 kg Glavni pogon Območje vrtljajev vretena 1415 min⁻¹ Največja debelina pločevine 20 mm Stroj za odstranjevanje robov LISSMAC SBM-M 1500 B2 je bil izdelan leta 2014. Namenjen je učinkovitemu odstranjevanju robov ter zagotavlja dosledno kakovost in zanesljivo delovanje. Izkoristite priložnost za nakup stroja LISSMAC SBM-M 1500 B2. Za več informacij nas kontaktirajte. Vrste uporabe Druga oprema za obdelavo pločevine

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, delovna širina: 1.300 mm, skupna višina: 2.240 mm, skupna masa: 2.300 kg, največja dolžina izdelka: 2.070 mm, Ta Fladder 300 Gyro je bila izdelana leta 2000. Ima delovno širino 1300 mm, šest glav s krtačo in brusno enoto, ki je rotacijska in nihajna. Opremljena je z dvema vakuumskima puhaloma in vakuumskim transportnim trakom, kar zagotavlja učinkovito ravnanje z materiali. Moč motorja je 7,5 kW, hitrost podajanja pa je brezstopenjsko nastavljiva od 2 do 8 m/min. Za dodatne informacije o tem stroju nas kontaktirajte. • Število glav s krtačo: 6 • Brusna enota: rotacijska in nihajna • Vakuumsko puhalo: 2 • Moč motorja: 7,5 kW • Transportni trak: vakuumski trak Gbsdpfxex D E Hzs Agyei • Hitrost podajanja: 2–8 m/min (brezstopenjsko nastavljiva)

Stanje: novo, Leto izdelave: 2026, Max. Durchlassbreite: 1350 mm Bearbeitbare Blechstärke: 0,5 - 80 mm Vorschub stufenlos: 0,5 - 6 m / min Länge: mm Breite: mm Höhe: mm Gewicht Maschine : kg Standardausstattung 3-Stationen-Anlage: 1. Station: Hammerstation zur Schlackeentfernung 2. Station: Schleifband Gsdex S Dxbjpfx Agyebi 3. Station: Bürstelemente zum Kantenverrunden Vier-Säulen-Synchronhub, rollende Bürstenposition unabhängig vom Hub Hub-Servosteuerungsgenauigkeit 0,01 chine NC PLC Touchscreen-Einstellung der chine mit Nassstaubsauger Zusatzausstattung Optionaler Zuführmodus: 1. Zuführung mit starkem Permanentmagnet-Adsorptionstransport (geeignet für Werkstücke aus Karton. Werkstückgröße ≥ 30 mm × 30 mm) 2. Zuführung mit Vakuum-Unterdruck-Adsorptionstransport (geeignet für Edelstahlplatten, Kupferplatten, Aluminiumplatten usw.), die nicht magnetisch adsorbiert werden. Werkstückgröße ≥ 50 mm × 50 mm)

Stanje: novo, Leto izdelave: 2026, Maximum working width: 1330 mm Processable sheet thickness: 0.5 - 80 mm Infinitely variable feed rate: 0.5 - 6 m / min Abrasive belt dimensions: 1910 x 1350 mm Brush element dimensions: 300 x 400 mm Abrasive belt speed: 18 m / s Number of planetary heads with brushes: 8 pcs. Material thickness adjustment precision: 0.01 mm Length: 4200 mm Width: 2300 mm Height: 2400 mm Machine weight: 6500 kg Total connected load: 68 kW Standard equipment Machine configuration: 2- or 3-station version possible: 1st station: abrasive belt 2nd station: brush elements Optional 3rd station: abrasive belt or polishing station Main components: PLC: Siemens Gjdpfxex S Dwqs Agyebi Touchscreen: Siemens Low-voltage devices: Schneider Frequency inverter: Schneider Extraction fan: Elektror, Germany Total connected power: Abrasive belt motor: 15 kW Brush motor: 11 kW Infeed belt motor: 4 kW Vacuum extraction motor: 15 kW Frequency inverter for rotating brushes: 15 kW Machine with wet vacuum unit Optional equipment Optional feed modes: 1. Feed with strong permanent magnet adsorption conveyor (suitable for cardboard workpieces. Minimum workpiece size ≥ 30 mm × 30 mm) 2. Feed with vacuum suction adsorption conveyor (suitable for stainless steel, copper, aluminum sheets, etc. that cannot be magnetically adsorbed. Minimum workpiece size ≥ 50 mm × 50 mm)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, delovna širina: 2.000 mm, maks. debelina aluminijaste pločevine: 20 mm, Salvagnini B3 Gedpfx Aoup T Ttsgysbi Maximální délka ohybu: 2000 mm Maximální lisovací síla závisí na délce ohybu a použitých nástrojích, dle výpočtové tabulky pro ohraňovací lis.

Stanje: novo, DM100 ZC – performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser cutting, shearing, or punching of metal workpieces ranging in size from 50 x 50 mm up to 1100 x 100 mm. The first station processes the products using a contact roller (approx. 55° Shore hardness) with an abrasive belt, effectively removing heavy burrs in the initial step. The second station features two counter-rotating cross belts with abrasive blocks, which round off the edges of the entire product, both internally and externally, in a second step. A major advantage is the deburring of products with surface protection film, as only the edges are processed without damaging the film. Technical specifications – DM1100 ZC: Working capacity (Ø mm): 1100x100 Number of belt stations (Z): 1 Number of cross belt stations: 1 Abrasive belt dimensions (mm): 1100x2200 Abrasive belt speed (m/s): 10 Cross belt speed (m/s): 8 Feed speed (m/s): 0.9–13 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW): (2x) 3 Gbodpsd Hintsfx Agysi Feed motor (kW): 0.37 Total power (kW): 26.22 Power consumption (A): 55 Extraction connection per head (Ø mm): (2x) 150 Dimensions (mm): 2230x2300x2250 Weight (kg): 3300

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, used Timesavers deburring machine 42-series-1350-WRB Technical Data: Year of manufacture: 2015 Condition: overhauled (2026) The machine is powered up and can be inspected by appointment! Max. working width: 1350 mm Abrasive belt dimensions (W x L): 1380 x 1900 mm Antistatic device Maximum weight: 100 kg Electrical connections: 400 V Frequency: 50 Hz 1st Unit: Contact roller ø 180 mm Contact roller, 55° Shore NI, grooved Pneumatic oscillation Fine adjustment via lifting and lowering of the contact roller Dial gauge Main motor: 15 kW Processing speed: 11 m/s, in feed direction 2nd Unit: Rotary brush unit 8 brushes, ø 350 mm Motorised height adjustment with toggle switch Drive motors: 5 x 1.5 kW Rotary unit speed, frequency-controlled Processing speed: 6–17 m/s 3rd Unit: Panel edge cleaning brush Feed: Fixed vacuum table Feed belt: flat, perforated, oil- and heat-resistant, flame-retardant Feed motor: 2.6 kW, frequency-controlled, 0.6–8 m/min Toggle switch for feed belt forward/reverse Motorised table height adjustment: 0.18 kW, 0–100 mm, digital display Pressure rollers: Spring-loaded pressure rollers, ø 50 mm, front with limit switch Vacuum pump: 15 kW Machine built to CE guidelines Main switch, hour meter Sound pressure level: ± 80 dB Godjyk U Szopfx Agysbi Machine weight: 6,200 kg On request, we can also offer extraction and/or installation!

Stanje: rabljeno, Leto izdelave: 2005, skupna dolžina: 3.940 mm, skupna širina: 1.980 mm, skupna višina: 2.010 mm, Hmotnost brez tovora: 7.000 kg Cena: na zahtevo Delovna širina: 950 mm Delovna višina: 0,5–120 mm - Leto izdelave: 2005 - Dokumentacija na voljo: ne - CE-oznaka: da - CE-certifikat: ne - Serijska številka: - Krmiljenje: CNC - Število postaj [kos]: 3 - Tip postaje 1: brusilni trak - Tip postaje 2: rotacijska ščetka - Tip postaje 3: rotacijska ščetka - Moč [kW]: 39 - Min. debelina pločevine [mm]: 0,5 - Max. debelina pločevine [mm]: 120 - Max. delovna širina [mm]: 950 - Transportne mere: 3.940 mm x 1.980 mm x 2.010 mm (d x š x v) Gbodpoxwnbujfx Agyei - Transportna teža [kg]: 7.000 kg - Transportni paketi [kos]: 4 Finančne informacije DDV: Naveden cena je brez DDV DDV/uvozna obdavčitev: DDV je odbitna za podjetja Dostava in odkup sta možna kadar koli za vse iz industrijskega področja Lukas van Rossum

Stanje: novo, Condition: New Delivery time: approx. 12 weeks from order Country of origin: Italy Price: €57,900 Leasing rate: €1,094.31 Bestseller 1 Working width: 650 mm Sheet thickness range – mild steel: 0.5 – 170 mm Abrasive belt dimensions: 670 x 2200 mm Extraction capacity: 4,000 m³/h Dust extraction port: 120 mm diameter Compressed air connection: 6 bar Noise level: 78 (+/-2) dB Motor power: 22 kW Length: 2,600 mm Width: 1,350 mm Height: 2,100 mm Weight: 1,125 kg WITH 2 WORKING UNITS: 1 X ABRASIVE BELT AND 1 X BRUSH UNIT, TOP SIDE The machine features a stress-relieved, welded steel frame for a stable and rigid structure. Motorized height adjustment of the work table via 4 synchronized spindles. Independent drive motors for each working unit. Extraction hoods inside the machine, one per station. Touch screen for: * Automatic star-delta switching of main motors * Analog ammeter for each unit * Digital sheet thickness display with decimal point accuracy * Material thickness setting (+/- 0.1 mm) * Machine status monitoring with alarm notifications FEED SYSTEM Robust steel construction with wear-resistant surface. Vacuum conveyor belt available on request. Variable feed speed via frequency inverter: 0.6 to 6.5 m/min. Rubber conveyor belt, oil- and heat-resistant. Automatic conveyor belt centering. Side guides to prevent belt lift-off. Rubber pressure rollers before and after each station, oil- and heat-resistant. Idler rollers at front and rear tables. INCLUDES OPTIONAL TAMPICO BRUSH FOR CONVEYOR BELT CLEANING 1st WORKING UNIT – R Balanced contact roller with oil- and heat-resistant nitrile rubber coating. Adjustable via eccentric shaft for working position and compensation for abrasive belt wear. Pneumatic cylinders for automatic positioning as well as lift-off in case of emergency stop. Can be equipped with abrasive belts and/or Scotch Brite. Motorized adjustment and electronic control of contact roller height. Motor with variable speed and automatic emergency brake. Pneumatic abrasive belt tensioning. Abrasive belt centering system with electronic photo sensor. Oscillation adjustment for width and timing. Contact roller adjustment accuracy: +/-0.02 mm Contact roller adjustment speed: 10 m/s Contact roller diameter: 125 mm Rubber roller hardness: 55 Shore Contact roller adjustment stroke (grit compensation, up/down): 8 mm Abrasive belt speed: 3–18 m/s Motor power: 7.5 kW 2nd WORKING UNIT – X 2 rows of vertical brushes, 4 rotate clockwise and 4 counterclockwise. Oscillating traverse movement of the entire unit. Quick-change brush holders. Brush diameter: 115 mm Number of brushes: 8 pcs. Oscillation stroke: 15 mm Rotation motor power: 2.2 kW Rotation speed: 1,000 rpm Oscillation motor power: 0.37 kW Abrasive brush speed: 10.0 m/s Optional equipment: B Unit – external horizontal drum brush Ø 150 mm * with Scotch Brite brush: €5,150.00 * with 0.3 mm wire brush: €6,060.00 R UNIT – ABRASIVE BELT Motor 11 kW: €740.00 X UNIT – CUP BRUSHES Motor with variable speed 5.5 kW 350/1100 Included Godpfowiqukjx Agysbi OPTIONS: Return to Sender system (workpiece is returned to operator): €1,770.00 Conveyor belt with vacuum system – 3.0 kW: €5,150.00

Stanje: novo, Timesavers serija 12-300-WRBW Gbsdpeymlguofx Agysi Vakuumska miza Postaja 1: Predhodno brušenje, odstranjevanje ostankov in brizg Postaja 2: Zaobljanje robov z rotacijsko razigljevalno krtačo Postaja 3: Površinska obdelava s Scotch trakom

Stanje: zelo dobro (rabljeno), Serija 12-225-WRD Gbjdpfx Aeymlfdogyei 1. postaja: brusilni trak za odstranjevanje robov in laserskih sledi 2. postaja: disk za lahko zaobljanje robov Prehodna širina: 225 mm vključno s TEKA odsesovanjem

Stanje: novo, Leto izdelave: 2025, Working width 1500 mm Workpiece thickness – max. 0.5 – 50 mm Dimensions 3300 x 1500 x 1800 mm Feed rate stepless 0–4 m/min Total connected load 20.4 kW Machine weight approx. 2800 kg The SBM-L G1S2 grinding and deburring machines are designed for double-sided deburring and edge rounding of workpieces in a single pass. Godpfsx H Tvfox Agysbi LISSMAC machines are used for deburring sheet metal and processing sheet metal parts, laser-cut parts, and stamped parts. The L series is equipped with three processing units each on both the top and bottom sides. Workpieces made of stainless steel, steel, aluminium, or non-ferrous metals can be processed on the top, bottom, or both sides as required. Double-sided sheet metal processing and edge rounding in just one operation enable time savings of up to 60%. Seamless integration with automation solutions or incorporation into production lines is also possible. The machine design ensures ergonomic operation and a pleasant working environment—free from dirt, dust, and noise. Comprising: - SBM-L 1500 G1S2 evo grinding machine - 4x SBM 1500 sanding belts with rib P60 Co - 2x SBM-L 1500 sanding belt L=4123 W=70 P80 Co - SBM-M/L 1500 sound insulation - LIServ 4.0 package evo - Camera set MP - DDE 3002 dry extraction unit - DDE 3002 standard piping The machine is available ex-stock Niederlangen for immediate delivery.

Stanje: rabljeno, Leto izdelave: 2020, obratovalne ure: 4.725 h, Funkcionalnost: popolnoma funkcionalen, delovna širina: 1.600 mm, najv. debelina pločevine: 100 mm, Serija 32 RB je rotacijski krtačni stroj za odstranjevanje robov, zaobljevanje robov, končno brušenje in odstranjevanje laserskega oksidnega sloja na različnih materialih. Ta model 42 serije 1600 WRb je opremljen s 300-mm magnetno stezo, vključno z Nattae-izvlekom od Ulmatec z ATEX-certifikatom. Stroj je bil generalno obnovljen in opremljen z novo transportno preprogo. Gbjdpeyudbmsfx Agyoi

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Serija 10, znana tudi kot Manual Grinder, je vsestranski vstopni model podjetja Timesavers in cenovno ugodna alternativa ročnemu odstranjevanju iglic, zaobljenju robov, odstranjevanju žlindre in oksidne plasti ter končnemu brušenju kovin. Gbodpfx Agsyucq Tsyji

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, najv. debelina pločevine: 150 mm, skupna dolžina: 2.150 mm, skupna širina: 2.205 mm, skupna višina: 2.320 mm, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, moč: 16 kW (21,75 KM), vhodni tok: 32 A, This F1200 has only been used as a showroom model and is therefore as good as new. This machine can be viewed in our showroom in Bergeijk. Gbjdpfxsyt Npys Agyei Discover the advanced F1200 finishing machine, equipped with an intuitive HMI touchscreen for effortless operation. This display allows operators to easily switch between various finishing programs, ensuring high repeatability of product quality while minimizing operator errors. Depending on the materials to be processed, you can choose a system with either vacuum or magnetic support. At the infeed side, burrs and irregularities are removed by a grinding unit, resulting in a smooth, burr-free surface. This is followed by four oscillating combination brushes that apply light pressure. The brushes ensure uniform rounding of all edges and holes, on and within the surface-ground product, leading to the most optimal finish. Additionally, the F1200 is also available in an XL version, which adds a fourth station. This station includes a second grinding aggregate, making it possible to apply a line finish with a finer abrasive belt or to finish with a Scotch-Brite belt. The F1200 offers options for automatic brush calibration, guaranteeing constant consistency and precision, as well as full ERP control and seamless integration into automated production environments. In summary, it is a finishing machine that is fully prepared for the future!

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, najv. debelina pločevine: 110 mm, skupna dolžina: 4.370 mm, skupna širina: 2.205 mm, skupna višina: 2.320 mm, skupna masa: 6.150 kg, vhodna napetost: 400 V, višina obdelovanca (maks.): 110 mm, vhodna frekvenca: 50 Hz, moč: 30 kW (40,79 KM), širina obdelovanca (maks.): 1.200 mm, vhodni tok: 59 A, This SER1200 Multibrush VAC is currently available in our showroom and has only been used for several demonstrations. You can still view this machine at our showroom in Bergeijk. Discover the innovatively developed SER1200 Multibrush finishing machine, designed with 4 processing stations and 17 controllable motors. The entire finishing machine is operated via the HMI touchscreen, which is highly intuitive and ensures effortless operation. The touchscreen allows for easy selection of various finishing programs, resulting in high repeatability of product quality and preventing setup errors by the operator. Thanks to the automatic height adjustment at the processing stations, consistency and precision are always guaranteed. At the first station, burrs and irregularities are removed using a grinding unit, resulting in a flat, burr-free surface. After grinding, four oscillating combination brushes apply light pressure to the product, rounding all edges and holes both around and in the surface of the product. For the final process, the Multibrush round brushes ensure flawless post-processing. The six brushes provide a non-directional finish and round the edges with a radius of 2+ mm, giving the product a high-quality and durable appearance. The SER1200 Multibrush finishing machine is also available in an XL version, which adds a fifth station to the machine. This fifth station features a second grinding unit, allowing you to apply a line finish to your product using a finer grinding belt or scotch-brite belt. The SER finishing machine uses a unique brush combination, with Q-Fin being the only supplier on the market offering this solution, which we call: "The Ultimate Qombination." This allows a radius of 2+ mm to be achieved in a single pass. The SER1200 enables full ERP control and seamless integration into automated production processes — in short, a finishing machine ready for the future! Gjdpfoyt Nm Esx Agysbi

Stanje: dober (rabljeno), Leto izdelave: 2016, This F200XL-VAC is used but has been inspected and is in excellent condition. The F200 XL is a 3-station machine, equipped as standard with the brush height tracking system designed by Q-Fin. Combined with its straightforward push-button control system, this ensures that setting up and operating the F200 is intuitive, resulting in the most user-friendly machine available on the market. The machine comes as standard with infinitely variable speed adjustment for both the conveyor and the brush(es) and/or grinding head(s), making all possible operations and finishes achievable. You determine the desired finish yourself. Gsdoyt Nhvjpfx Agyobi The F200 XL can be equipped with either a vacuum system (for non-ferrous metals, e.g., stainless steel and aluminium) or a magnetic system (for ferrous metals). These systems ensure effective fixation of the products to be processed on the conveyor table, allowing even smaller workpieces (from 10x10 mm) to be processed safely, trouble-free, and quickly. At Q-Fin, we are convinced: a narrower machine is ideal for small workpieces, while a wider machine suits larger parts. In many cases, the throughput speed of this machine is up to 5 times higher than comparable machines. You can view this machine in our showroom in Bergeijk.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, delovna širina: 200 mm, najv. debelina pločevine: 100 mm, skupna dolžina: 1.850 mm, skupna širina: 670 mm, skupna višina: 2.145 mm, skupna masa: 1.090 kg, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, moč: 8 kW (10,88 KM), širina obdelovanca (maks.): 1.200 mm, vhodni tok: 16 A, This machine has only served as a showroom model and is therefore as good as new. You are always welcome to visit our showroom in Bergeijk to take a look. 2023 Deburring and finishing machine F200 XL with vacuum support. Suitable for deburring, edge rounding, and/or grinding steel sheet parts up to 200 mm wide. Discover the advanced F200 XL finishing machine. All products ranging from the size of a euro coin up to 200 mm wide can be processed on this compact powerhouse. On the infeed side, burrs and irregularities are removed using a grinding unit, resulting in a smooth and burr-free surface. This is followed by two oscillating combination brushes that apply light pressure. The brushes ensure uniform edge rounding of all edges and holes, all around and within the flat-ground product, leading to the most optimal finish. The F200 XL offers functionalities such as automatic brush calibration to guarantee consistent results and precision, as well as full ERP control and seamless integration into automated production environments. In short, it is a finishing machine fully prepared for the future! We can now offer you this F200 XL - VAC showroom machine, year of construction 2023, optionally in combination with a WES3000 wet extraction unit and associated piping. Only available until sold. Gbjdpfx Aoyt I U Usgyji Machine is supplied with 1-year warranty, excluding wear parts. Delivery ex works Bergeijk. If desired, we can also offer the machine including transport, installation, and training of your operators on site. The machine can be viewed in the showroom in the Netherlands. Contact us and we will send you an attractive quotation.

Stanje: novo, DM1100 2C – Edge Rounding Machine for Laser-cut, Plasma-cut, and Punched Parts NEW DESIGN – UNDER POWER FOR DEMONSTRATION – IMMEDIATELY AVAILABLE FROM STOCK The DM1100 2C rounds the upper and lower edges of metal parts from a minimum size of 150 mm up to a length of 1100 mm IN A SINGLE PASS. The first station processes the parts from below using two counter-rotating cross belts, while the second station processes the parts from above, also using two counter-rotating cross belts. The cross belts enable rounding of both the inner and outer edges of the workpieces. Sharp edges on steel, stainless steel, and aluminum parts produced by laser cutting, punching, or shearing are removed. Simultaneous processing of both sides of laser-cut or punched metal parts saves time and reduces production costs. Another advantage of the DM1100 2C is its ability to process small parts from 50 mm. By folding up a table, the rotation direction of the upper conveyor belt changes automatically, bridging the gap of the first processing station, so that parts go directly to the second station. This means that small products from 50 mm up to 150 mm can be processed on one side only. A further benefit is that the machine can edge round parts with protective film without damaging the film. Easy and tool-free cross belt change. Program for automatic positioning of the upper and lower belts ensures good accessibility and shorter changeover times. Simple to operate via integrated touchscreen. This machine is also available with a return conveyor system. Gedpfx Agod Ev Upsysbi Technical Data: Working capacity (Ø mm): 1100 x 50 Number of cross-belt stations: 2 Cross-belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Cross-belt motor (kW): (4x) 3 Feed motor (kW): (3x) 0.18 Total power (kW): 13.1 Power consumption (A): 30 Extraction connection per head (Ø mm): 150 Dimensions (mm): 2560 x 1980 x 2150 Weight (kg): 2210

Stanje: novo, DESCRIPTION DM100 Z2C - Performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser, shear, or punch separation of metal parts, from sizes of 50 x 50 mm up to 1100 x 100 mm. Gjdpfxjd Ixade Agyebi The first station processes the products with a contact roller (approx. 55° Shore) using an abrasive belt, removing heavy burrs in the initial step. The second station processes the products with two pairs of counter-rotating cross belts—from above and below. The cross belts round both the inner and outer edges of the parts to be processed. A major advantage is the deburring of products with protective surface film, as only the edges are processed without damaging the film. Technical Data – DM1100 Z2C: Working capacity (Ø mm): 1100 x 100 Number of belt stations (Z): 1 Number of cross-belt stations: 2 Abrasive belt dimensions (mm): 1100 x 2200 Abrasive belt speed (m/s): 8–22 Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW) (2x): 3 Feed motor (kW) (3x): 0.18 Total power (kW): 33 Power consumption (A): 62 Extraction connection per head (Ø mm): 150 + 185 Dimensions (mm): 3600 x 2330 x 2350 Weight (kg): 5000

Stanje: novo, Leto izdelave: 2026, Max. pass-through width: 1350 mm Processable sheet thickness: 0.5 - 80 mm Infinitely variable feed rate: 0.5 - 6 m/min Abrasive belt dimensions: 1910 x 1350 mm Brush element dimensions: 300 x 400 mm Abrasive belt speed: 12 m/s Number of planetary brush heads: 8 pcs Brush element speed: 8-26 m/s Brush element rotation speed: 1-15 rpm Material thickness setting precision: 0.01 mm Length: 3800 mm Width: 2300 mm Height: 2400 mm Machine weight: 5500 kg Total connected load: 49.5 kW Standard equipment Machine configuration: 1st station: abrasive belt; 2nd station: brush elements Main components: PLC: Siemens Touchscreen: Siemens Low-voltage devices: Schneider Frequency inverters: Schneider Exhaust fan: Elektror, Germany Power specifications: Abrasive belt motor: 15 kW Brush motor: 11 kW Infeed conveyor motor: 4 kW Vacuum extraction motor: 15 kW Frequency inverter for rotary brushes: 15 kW Gbedpfxeygx A Ns Agysi Optional equipment Optional feed mode: 1. Feed with strong permanent magnet adsorption conveyor (suitable for steel workpieces, workpiece size ≥ 30 mm × 30 mm). 2. Feed with vacuum suction conveyor (suitable for stainless steel sheets, copper sheets, aluminum sheets, etc., which cannot be transported magnetically. Workpiece size ≥ 50 mm × 50 mm).

Stanje: novo, Leto izdelave: 2026, Max. working width: 1330 mm Processable sheet thickness: 0.5 - 80 mm Godpfx Agoygx A Aoysbi Infinitely variable feed rate: 0.5 - 6 m/min Abrasive belt dimensions: 1910 x 1350 mm Brush element dimensions: 300 x 400 mm Abrasive belt speed: 18 m/s Number of planetary heads with brushes: 8 pcs. Thickness adjustment accuracy: 0.01 mm Length: 4200 mm Width: 2300 mm Height: 2400 mm Machine weight: 6500 kg Total connected load: 89 kW Standard equipment Machine configuration: 1st station: abrasive belt / 2nd station: brush elements / 3rd station: oscillating roller for surface finishing Main components: PLC: Siemens Touchscreen: Siemens Low-voltage devices: Schneider Frequency converter: Schneider Extraction fan: Elektror, Germany Total connected load: 89 kW Machine with wet dust removal unit Optional equipment Optional feeding modes: 1. Conveyor with strong permanent-magnet adsorption transport (suitable for steel workpieces. Workpiece size ≥ 30 mm × 30 mm) 2. Conveyor with vacuum underpressure adsorption transport (suitable for stainless steel sheets, copper sheets, aluminium sheets, etc. that are not magnetically adsorbed. Workpiece size ≥ 50 mm × 50 mm)