Stroj za odstranjevanje napak iz pločevine

Timesavers 41 Serie 900 WRB

Stanje: kot nova (razstavni stroj), obratovalne ure: 170 h,

Leto izdelave: 2002, stanje: rabljeno, Diameter 180 mm Workpiece length 0 mm Workpiece width 1350 mm Total power requirement 65 kW Machine weight approx. 7,500 kg Required floor space approx. m T I M E S A V E R S (Netherlands) Wide Belt Deburring and Finishing Machine Model 41 Series 1350 WRDOW-N Year of manufacture 2002 Serial No. 2313-03 _____ Sanding width approx. 1,350 mm Max. workpiece height approx. 1 – 50 mm Feed speed variable approx. 1 – 10 m/min Comprising the following units: 1.) Vacuum table with flat workpiece feed belt, 780 mm vacuum track in the center of the belt. Belt feed motor approx. 3 kW, frequency controlled for continuously variable feed rate 1 – 10 m/min. Selector switch for forward and reverse belt run, digital display for belt speed and continuous table height adjustment. Suitable for wet processing. 2.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 15/19 kW, belt speed approx. 11-22 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 3.) Vertical sanding/deburring disc (disc brush system) approx. Ø 1200 mm, consisting of self-adhesive nonwoven abrasive in various grades available, specially for deburring and cleaning surfaces as well as for radii rounding on workpieces. Also suitable for workpieces with varying heights. Drive approx. 7.5 kW, disc oscillates motor-driven (2.2 kW) across the entire belt width. 4.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 18.5 kW, belt speed approx. 11 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 5.) Wet processing version = complete coolant system consisting of belt filter unit with pump installed in machine base, rotary union on top of the deburring disc spindle, return of coolant via the vacuum table, and water mist separator above the machine, with blower approx. 5.3 kW. Side doors in V2A stainless steel sheet, oil skimmer, etc. 6.) Side-mounted control panel with clear controls and digital position and speed display. Joystick for feed belt and table adjustment, 3 x ammeters, etc. as well as front and rear workpiece pressure rollers, emergency stop Total drive power approx. 65 kW - 400 V – 50Hz Weight approx. 7,500 kg Required room height approx. 3.50 m Condition: good – available for demonstration under power Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice Hsdpfx Aot Hw Shoafjnp

Stanje: dober (rabljeno), Centre bore: 2-50 mm Hedjrivluopfx Aafenp Workpiece diameter: 8-125 mm Workpiece length: 50-1000 mm Grinding wheel speed: 13,000-45,000 rpm Various accessories MARCELS MASCHINEN AG

Stanje: rabljeno, Leto izdelave: 2004, Premer brušenja 250 mm Dolžina brušenja 650 mm Hnjdpfxoywntys Aafep Višina konic 125 mm Stroj se prodaja s servisom in novo geometrijo Delovnih ur do sedaj 12.260 Konjiček z fino nastavitvijo Brušilni vretenjak z možnostjo nagiba, 5° Hirt zobniški prenos Filter s papirnatim trakom Merilna naprava Marposs Naprava za notranje brušenje

Stanje: rabljeno, Leto izdelave: 2007, Suitable for the automatic machining of PCD-tipped cutters, shank tools, and disc-shaped tools such as saws, cutters, etc. using the wire electrical discharge machining (EDM) process. Equipment: - Full enclosure - Cooling unit for dielectric fluid - Automatic fire extinguishing system - N181 extraction unit - Measuring probe - Machine lamp - Automatic central lubrication - ISO50 workpiece holder - Measuring arbor Maximum cutter outside diameter: 250 mm Maximum cutting length: 260 mm Shank tool diameter: 10 - 250 mm Hnjdpfjwtmg Dex Aafep Maximum outside diameter of disc-shaped tools: 250 mm Maximum tool weight: 20 kg Travel X-axis: 275 mm Travel Y-axis: 300 mm Travel W-axis: 200 mm A-axis taper: ISO 50 E-axis swivel range: 180° Machine dimensions (L x W x H): 2535 x 2200 x 2220 mm Weight approx.: 4500 kg Connected load: 4.5 kW (400 V / 50 Hz) Colour: grey RAL 7045/7047

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1114.3705-24, Used CNC Lathe Manufacturer: Boehringer Model: VDF 250Cm Year of manufacture: 1997 VDF Boehringer 250C The machine features the following equipment: - 1000 mm turning length - Without tailstock - Driven tools - Special swivel chuck - Siemens 840C control The Boehringer VDF 250 Cm is a CNC lathe designed for chuck workpieces. It is distinguished by its robust construction and high-precision machining capabilities. Technical Data (Model Year 1997) Working Area: - Swing diameter over bed: 550 mm - Swing diameter over cross slide: 480 mm - X-axis travel: 405 mm - Z-axis travel: 1,099 mm - Maximum turning length: 1,000 mm (No) Tailstock: Tool Turret: - Number of stations: 12 - Tool holder: VDI 50 DIN 69880 - Driven tools: YES Spindle: - Spindle nose size: 8 DIN 55026 - Spindle bore: 103 mm - Max. chuck diameter: 315 mm - Max. drive power (50% duty cycle): 53 kW - Max. torque: 780 Nm - Speed range: 30–3,000 rpm Feeds: - Automatic feed rates: 1–10,000 mm/min - Rapid traverse speed: 10 m/min (X and Z axes) - Max. feed force: 15 kN Dimensions and Weight: - Machine dimensions (L × W × H): approx. 5,400 × 3,200 × 2,400 mm - Machine weight: approx. 11,000 kg Equipment: - Swiveling control panel - Hydraulic system by HYDROKRAFT - Coolant system with 600 l tank, max. pump pressure 5.5 bar, flow rate 60 l/min, pump power 1.1 kW - Chip conveyor with 325 l tank capacity, right-side discharge - 3-jaw power chuck - Oil mist extraction - Electrical cabinet with cooling unit and temperature controller by RITTAL Hjdpfxowlap Ao Aafjnp Control: SIEMENS SINUMERIK 840 C Variants and Differences There are various versions of the VDF 250 series, such as the VDF 250 CU, which may be equipped with different controls (e.g., PHILIPS B2T) and technical specifications. Some models feature driven tools and a tailstock, while others are pure chuck machines designed without a tailstock. Conclusion The Boehringer VDF 250 Cm is a versatile CNC lathe known for its stability and precision. Its robust design and comprehensive features make it ideal for machining chuck parts in various production environments.

Stanje: dober (rabljeno), Flat-die thread rolling machine, thread rolling machine, segmented thread rolling machine, cold forming machine, knurling machine, thread rolling machine - Manufacturer: EWM, flat-die thread rolling and knurling machine - Type: unfortunately without type designation - Drive: 4.6/5.8 kW, 1435/2890 rpm - Belt drive: adjustable in 3 steps - Knurling die: RAA 1.0 - Central lubrication Hnjdpoi Eg Nkofx Aafjp - Dimensions: 1680/920/H1440 mm - Weight: 1308 kg

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 5 - Distance between centers: 400 mm - Usable diameter: 180 mm LINEAR AXES - Travel X1 and X2 x Z: 220 mm - Travel Z: 850 mm - Resolution X x Z: 0.0001 mm TURRET: - Number of fixed positions: 12 - Tool holder: VDI30 GRINDING WHEEL HEADSTOCK - External grinding right: * Grinding wheel dimensions (Ø x width x bore): 400 x 50 x 127 mm * Drive power: 6.8 kW WORKPIECE SPINDLE STOCK - Max. spindle speed: 7,500 rpm - Synchronous speed: 1 - 5,000 rpm - Taper type: MT4 - Drive power: 10.5 kW - C-axis: 0.001° SYNCHRONIZED COUNTER SPINDLE STOCK - Max. spindle speed: 7,500 rpm - Synchronous speed: 1 - 5,000 rpm - C-axis: 0.001° - Internal taper: MT4 - Micrometric adjustment: +/- 40 micron - Drive power: 10.5 kW POWER SUPPLY - Capacity: 45 KVA DIMENSIONS - Space requirement: 2,800 x 3,960 mm - Machine weight: 7,600 kg OPERATING HOURS - Power-on hours: 57,000 h ACCESSORIES - CN FANUC 310i-modelA - StuderWIN software - RS232 / USB interface - Remote electronic handwheel - Turret head with automatic length calibration Renishaw LP2 - Marposs diameter probe (multi-range) + Z4-axis for positioning - Semi-automatic balancing of the grinding wheel MPM.3 BMT100 M.24 - Coolant tank 480 L * with paper filter * with magnetic filter - Chip conveyor - Mist extraction - Cooling unit for grinding wheel motor Hnjdovxw A Uepfx Aafop - Electronic contact detection Dittel AE6000 - Stationary dressing device on the workpiece spindle stock - Control cabinet air conditioning - Balancing shaft - Interface for automatic loading system

Stanje: dober (rabljeno), Leto izdelave: 1984,

Stanje: rabljeno, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of Manufacture: 2007 Rolling Force: max. 24 tons Tool Diameter: max. 270 mm Roll Spindle Diameter: 69.85 mm Tool Bore Diameter: 70 mm (nominal diameter) Mounting Length, Tool Length: max. 180 mm Workpiece Diameter: max. 50 mm Hydraulic Motor Power: 3 kW Roll Drive Motor Power: approx. 5.5 kW Mains Connection: 400 Volt, 50 Hz, 10 kW - Pivoting roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gear shift - Hydraulic system integrated in machine frame - Operating manual with electrical diagram Space requirements (L x W x H): 2000 x 1450 x 190 mm Weight: approx. 3 tons Very good condition Plunge rolling: The thread rolling dies, with the same pitch as the workpiece, form the thread by pressing into the workpiece up to the nominal diameter. The thread length is at most as long as the width of the rolling dies. Through-feed rolling: Used when the thread length exceeds the width of the rolling dies. Through-feed dies have three functional zones – lead-in, calibration, and lead-out. Hedpsuz If Njfx Aafonp Knurling Rolls: These rolls have no pitch and are swiveled at the pitch angle of the profile to be rolled. Pitch Rolls: Pitch rolls have a profile with a pitch, differing from knurling rolls. The sum of the pitch angle and swivel angle determines the pitch angle in the finished workpiece.