Plinskih peči predgretjem

VEI-Engineering VEI_KO_V_GB_400-350

Stanje: novo, Leto izdelave: 2024, 600 kg load capacity Height-adjustable welding positioner with 100 mm through-hole Plate diameter: 700 mm Horizontal height: min. 0.65 m, max. 1.25 m Height when tilted: min. 0.45 m, max. 0.95 m Rotation speed: 0.01 – 1.3 rpm Tilting angle up to 135° Hand and foot remote control with speed display Very robust construction Ppedpfx Acsg Tdpgozjl

Leto izdelave: 2021, Stanje: novo, Type: Gas-fired with central recuperator Max. temperature: 1,300°C Max. furnace throughput: approx. 700 kg/h Clear door opening (W x H): 600 x 400 mm Number of burners: 6 Number of control zones: 3 Heating capacity: 720 kW Total electrical connected load: approx. 15 kVA Ppodpeg E S Inofx Aczsl PLC: Siemens S7

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Inventar livarne Kompleten inventar peščene livarne v Venlo-Lomm – Nizozemska Modelna linija HWS, tip SFM2 / 30 zabojev/uro Krmiljenje S/7 Lijak rezkar Stroj za streljanje jeder Röper H6,5-H16 hidravlični – krmiljenje S/7 Mešalec jedrnega peska znamke Klein YXLON rentgenska naprava Spektralna analiza Spectro Analizator Ideco Modelni stroji Priprava peska Talilne peči Trakasti brusilnik Zabojnik za nevarno blago Sušilna peč Tračna žaga Peskalni stroj Hali žerjav 32 t / žerjavna proga: 5750 mm / letnik 2002 Podpfjvz Aprox Aczepl Prisrčno vabljeni na ogled livarne Naprave in artikli se prodajajo rabljeni Prodajalec izključuje jamstva.

Stanje: novo, Električna komorna peč, proizvajalec VEI Tip: KO_EB Podpfoipvgiex Aczopl Kroženje zraka: horizontalno usmerjanje zraka Maksimalna temperatura peči: 650°C Notranje dimenzije (Š x V x G): 800 x 800 x 1000 mm Ogrevalna moč: 51 kW Moč motorja za kroženje: 5,5 kW Priključna moč: 61 kVA

Stanje: novo, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900x900 mm Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top-tier sawing technology and maximum performance when cutting specialty steels. Ppedpfx Aefg E Hpoczsl - The electro-welded machine frame and the steel saw frame meet all cutting requirements and eliminate vibrations and noise. - The chip conveyor is hydraulically driven and the speed is adjustable. - All machine motions (saw frame, vice, feed, saw band guides) are enabled by modern linear guides with high static and dynamic load capacity, guaranteeing very low sliding friction. - Another key feature is the material positioning rollers, which are powered by a hydraulic motor. These move at a right angle to the material, allowing for optimal clamping. - Thanks to the saw band position height control, the operator can position the band close to the material’s upper edge. After cutting, the band automatically returns to the previous position; alternatively, the 'remain' option in the lower position can be selected. During the cutting cycle, the software compares cutting force with preset values and can stop the sawing system in case of irregularities. - The saw band is cleaned by two adjustable steel brushes, which are hydraulically driven. - The hydraulic unit, including filter and manometer, ensures especially smooth operation at constant pressure. - Precision ground carbide inserts clamp the saw band, complete with lateral, hardened, and adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. - The saw band is tensioned by a hydraulic cylinder, controlled by the machine software. Tension is automatically released after a preset time when the machine is idle or after a cycle is completed. - Automatic version with CNC control available for the X-TECH 900 / 1200 models with a feed length of 500 mm for high production series. - The material is supported by a table with seven rollers, powered by a hydraulic orbital motor, allowing precise material positioning even under maximum load. - All guided motions are facilitated by four ball circulation guides with high static and dynamic load capacities; significantly reduced feed friction. Hardened and ground prismatic guides. Price on request.

Stanje: dober (rabljeno), Leto izdelave: 2004, Clamping knife head type (max.) 460 mm Knife head weight (max.) 150 kg Mounting plate diameter for knife heads (Ø) 360 mm Mounting taper for knife heads nominal diameter Ø 58.227 mm Travel path - z axis 200 mm Chart recording magnification ±10 - ±500 µm Machine weight approx. 2.3 t Space requirement approx. 2 x 1.5 x 2.03 m In the manufacturing process for spiral bevel gears, the quality of the gear manufacturing tools used plays a decisive role. Especially in dry milling, high gear quality and long tool life can only be achieved through precisely adjusted knife heads. The Oerlikon Knife Head Setting and Testing Device CS 200 enables quick and easy adjustment of individual blades, checks their position, and documents the measurement results. The measurement process on the CNC-controlled testing Podpfeul Efmjx Aczopl device is semi-automated: all actions required to perform the process are shown on the display for operator guidance. The positioning of the individual knives in the knife head, as well as setting the height of the knife tips, is largely automatic thanks to a special procedure, and is simultaneously documented via a run-out diagram. A subsequent measuring process checks the radial position of both the internal and external cutting edges of all knives in the knife head. If individual inspection parameters on the knives do not meet the tolerance requirements, these can be adjusted individually. Thanks to the combination of a semi-automated adjustment process, operator-guided setup actions, and automatic measuring processes, knife heads can be set quickly, conveniently, and with high precision. Operator-guided adjustment and inspection process: - Graphical display of the knife head design as well as measurement results with tolerance verification - Instructions for the operator in plain text (no coded information) - Simple allocation of measurement results to individual knives - Documentation of setup and measurement results via printer - Adjustment and inspection process suitable for stick blade heads of types ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® - Interface for neutral data

Leto izdelave: 2006, Stanje: rabljeno, Ultrasonic and Electrolytic Cleaning, Wire Cleaning Line, Wire Cleaning System, Wire Treatment System Manufacturer: Sirio-Wire Model: M0209 Number of wires/strands: 12 (6+6) Wire diameter: 1.0 – 5.5 mm; however, even thicker wires have been processed on the system with very satisfactory cleaning results. Year of manufacture: 2006 The system was operated for only around three years before production was relocated to another site. Ppsdpfxef Nku Rs Aczol Process: Ultrasonic and electrolytic cleaning in hot bath A detailed description of the process can be found on the manufacturer’s website (siriowire) under 'Ultrasonic and Electrolytic Cleaning.' The system is in good, operational condition and is complete except for the pumps. In the photos, the operator catwalk and the collection tray that the system sits in are missing; these photos will be added shortly. The last three images show systems of this type in operation.

Stanje: rabljeno, Leto izdelave: 1998, Polnilna prostornina 620 litrov Zunanji premer posode 1695 mm Dolžina posode (raztegnjena) 3800 mm Širina delovne kadi 430 mm Število vrtljajev 900 - 1485 obr/min Obratovalna napetost 400 V Skupna priključna moč 7,5 kW Teža stroja pribl. 1600 kg Psdpfx Acjw Hnr Iozopl Potreben prostor pribl. 1,80 x 1,70 x 1,30 m - Tovarniška št.: 18585/98-03 - z brezstopenjsko nastavitvijo vrtljajev (frekvenčni pretvornik) - s pnevmatsko ločevalno loputo

Stanje: dober (rabljeno), Leto izdelave: 2011, številka stroja/vozila: MS 1153, Technical data (approximate): Podpfxsllvr Dj Aczepl - Access opening to blasting chamber: W 370 x H 170 mm - Blast nozzle - Door opening to blasting chamber - Blast media pressure vessel - Blast media recovery system - Separate control panel - Space requirement for blasting unit: 1600 x 2000 x H 1750 mm - Space requirement for blast media container: 1200 x 1200 x H 2250 mm - Cartridge filter with extraction fan MUNK - SCHMITZ - Air volume: 700 - 1500 m³/h - Extraction fan: 3 kW - Space requirement for filter unit: 1600 x 1600 x H 3250 mm - Motor-driven infeed roller conveyor: 4 m - Non-driven roller conveyor: 3 m - Roller width approx.: 800 mm - Roller conveyor height approx.: 700 mm

Stanje: rabljeno, Leto izdelave: 2016, Premer reza 430 mm Dolžina tračnega lista 6830 mm Območje reza 430 x 430 mm Krmiljenje Siemens Simatic HMI Hitrost reza 80 m/min Višina naslona za material 700 mm Prostor za namestitev cca. 5,36 x 6,83 x 2,41 m Skupna potrebna moč 25 kW Teža stroja cca. 4920 kg Oprema/Dodatki: - Brezstopenjsko nastavljiv podajalnik reza Pedpfx Acoxb Edzezspl - Moč črpalke 75 l/min - Valjčna proga - Transporter za odrezke - Tehnična dokumentacija