Stroj Za Graviranje nakup rabljenega (118.026)

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2018, številka stroja/vozila: 144669, skupna masa: 400 kg, skupna dolžina: 1.000 mm, skupna širina: 700 mm, skupna višina: 1.000 mm, GRAVOTECH LASER WORKSTATION 2 - Obratovalna napetost: 100 - 240 V - Priključna moč: 800 W - Frekvenca: 50/60 Hz Knjdpfxexw Sk Tj Afxsd Pozor: izdelek mora biti obvezno prevzet med 19. in 23.01.2026 na še dogovorjen datum. FCA D-76571 Gaggenau - nakladanje na tovornjak

Stanje: rabljeno, Leto izdelave: 2016, Type of Laser: PowerLine F100 Technical Data: Travel Paths of Linear Axes X/Y/Z Axis: 800 / 300 / 300 mm Max. Workpiece Weight: 30 kg Heating, Ventilation, Air Conditioning: Operating Temperature: 25°C +/- 10°C Storage Temperature: 5°C to +40°C Ambient Conditions: non-condensing, non-corrosive, frost-proof Air E-section: 160 m³/h Pneumatic Supply: Medium: filtered, non-lubricated compressed air Max. Permissible Operating Pressure: 6 bar Temperature Range: -10° to +60°C Laser Safety Classification: Laser Safety Class 1 according to EN (IEC) 60825-1:2007 Laser Marking Field Size: 120 x 120 mm Operating and Storage Conditions: Load Capacity of the Floor: at least 500 kg/m² Clearance Above: 2 m for ventilation Transport Height: at least 2 m Room Height: at least 2.50 m Electricity: Input Fuse (Protection): 3 x 16 A Nominal Voltage: 400 V (+/- 10%); 3P; N; PE Nominal Frequency: 50/60 Hz; Neutral Conductor loaded Power Consumption: 4 kVA (at 50 Hz) Dimensions and Weight: Width¹): 1.50 m plus swing arm max. 0.8 m (width without monitor) Length¹): 1.80 m plus swing arm 0.5 m (length without monitor) Standing Workstation Height: 1.20 m Working Height: 0.96 m (standing workstation) Required Space and Volume²): Width: 3.00 m Length: 2.50 m Height: 2.20 m (standing workstation) Area: 7.50 m² Approximate Weight: 1500 kg Knedpfexqp Rdex Afxjd ¹) Width, length, and area of the laser processing machine may vary due to adjustments of the optional swing arm ²) The required area and volume do not include any traffic routes! The operator must define traffic routes around the machine in accordance with national occupational safety regulations. Operating and Storage Conditions: - No direct sunlight - Do not place near radiators - No strong temperature fluctuations - Not in areas with extreme dust exposure - Not in areas with extreme oil, solvent, or cleaning agent vapors

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Well-maintained machine with accessories as shown in the pictures. Knodexfhxpjpfx Afxjd

Stanje: zelo dobro (rabljeno), For sale: a classic, proven Gravograph IM3 mechanical engraver – ideal for nameplates, labels, industrial markings, or jewelry. • Model: Gravograph IM3 • Manufactured by: GRAVOGRAPH GMBH, Umkirch (Germany) • Motor in working order, clean guides • Set includes a complete assortment of fonts and symbols • Stable cast construction • Precise pantograph control • Durable worktable with linear guidance Kodpfoun U Ucjx Afxend Used condition, technically operational. Suitable for workshops as well as decorative and promotional purposes.

Stanje: rabljeno, Engraving machine with computer system Sign Pro 98 Kedoxr Aqmepfx Afxond

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Laser marking system Kodpjq Abnnsfx Afxond Manuf. Baublys Model BL 150 S/NC 500 Year 2001 Technical Data Manufacturer: Baublys Model: BL 150 S/NC 500 Year of manufacture: 2001 Laser: 150 Watt Laser type: Q-switched pulsed solid-state laser Laser medium: Nd:YAG Wavelength: 1064 nm Beam diameter: approx. 1.2 – 1.3 mm after output coupling mirror at TEM00 Beam divergence: 5 mrad TEM00 Pulse duration (time): CW / 90 ns Max. output power: 65 W multimode 16 W single mode Pulse energy: 16 mJ at 3 kHz Beam deflection system: Galvanometer system Line width in mixed mode: approx. 0.12 mm Deflection speed: 3 m/s; corresponding to 200 characters/s at 1.5 mm height and single-line font Dimensions: approx. Weight: approx. Power supply Voltage: 400 V, 3-phase 50 Hz, clockwise rotating field Connection: 5-pin CEE plug 16 A 6h Max. power consumption: 8.5 kW, max. 16 A per phase Fusing: 3 x 16 A slow-blow Water connection Cooling water flow rate: 7.5 l/min at 20°C supply temperature Discharge connection: G 3/4" male thread Heat dissipation: approx. 6.5 kW Max. inlet water temp.: 20°C Water consumption: depending on inlet temperature Outlet temperature:

Stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, skupna širina: 700 mm, skupna višina: 1.100 mm, skupna dolžina: 900 mm, skupna masa: 70 kg, dolžina mize: 400 mm, širina mize: 150 mm, Brez izklicne cene – zagotovljena prodaja najvišjemu ponudniku! Stroj se prodaja na dražbi zaradi likvidacije podjetja. Oddaja ponudbe pomeni obveznost pravočasnega prevzema med 26.01.2026 in 29.01.2026! TEHNIČNI PODATKI Dimenzije mize: 400 mm x 150 mm PODATKI O STROJU Mere (D x Š x V): 900 mm x 700 mm x 1.100 mm Teža: 70 kg Ksdpfsxqcarex Afxond

Stanje: potreben popravila (rabljeno), Leto izdelave: 2019, IMPACT EU + PN12 STD CORD DOT PEEN MARKER - IMPACT P 1 pneumatic marking system IMPACT P (78701) Marking area: 120x100 mm; Knjdowpu Sgjpfx Afxod Manually adjustable Z-axis (max height 300 mm) Robust metal housing with precise guides Intuitive operation via color touchscreen Powerful integrated software T08, including: - Automatic date and time stamping - Counter - Duplicate detection - Mark preview - Database connectivity (CSV, Excel, Access) Marks text, numbers, logos, 2D codes (DataMatrix, etc.) Character height from 1 mm to 100 mm Interfaces: Ethernet TCP/IP, RS232, USB, FTP, specific input/output ports Supplied with the following standard equipment: Standard marking tool PN12-60° Maintenance unit, stainless steel table, touchscreen with integrated T08 software Technical manual for commissioning on DVD Dimensions: 431 x 270 x 704 mm (L x W x H) - Weight: 26 kg

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, laserska moč: 30 W, vrsta hlajenja: zrak, skupna širina: 60 mm, skupna višina: 1.660 mm, skupna dolžina: 80 mm, skupna masa: 80 kg, The universally applicable LAS 28 laser marking system from Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. With the integrated fiber laser, you can mark almost any material, such as steel, hard metal, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. For permanent marking, laser usage is essential in many industries. The powerful laser software enables you to easily create texts, numbers, 2D codes, QR codes, and logos with just a few clicks—no extensive programming knowledge needed. Serial and article numbers are automatically incremented by the software after initial setup. Additionally, the software can read data (such as part numbers, project names, etc.) from existing tables and transfer them automatically to predefined fields. The use of a hand scanner is also supported. Standard equipment includes a laptop with a mounting bracket and Windows operating system. Optionally, the LAS 28 can be fitted with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extensions for marking long parts, are also available. Made in Germany • Fiber laser 30W (optional 20 or 50 watts) • Wavelength 1064nm • Marking field size: 150x150mm (optional: 200x200mm) • Optional: rotary axis (3-jaw chuck) • Optional: digital height measuring system • Optional: extraction system (incl. activated carbon filter) • Optional: autofocus system – automatic focus distance determination • Signal lamp for operating status indication • EZCAD marking software (optional additional laser software) • Pilot laser (easy preview, contour preview) • Focus finder (easy focus adjustment) • Max. component height approx. 270mm • Electrically adjustable Z-axis (working level adjustment) Knedeunh Hrepfx Afxsd • Frame made of aluminum profile • 230V power connection • Air-cooled • Laptop with Windows OS • Dimensions: 800x600x1660mm (LxWxH) • Weight: approx. 80 kg

Stanje: novo, Leto izdelave: 2024, številka stroja/vozila: BN20XS "Standard", dolžina gredi: 1.064 mm, teža obdelovanca (maks.): 5 kg, vhodna napetost: 230 V, vrsta vhodnega toka: Klimatska naprava, laserska moč: 20 W, vrsta hlajenja: zrak, skupna širina: 400 mm, skupna višina: 500 mm, skupna dolžina: 600 mm, delovno območje: 70 mm, skupna masa: 30 kg, trajanje garancije: 12 meseci, vrsta nastavitve višine: električni, maks. debelina aluminijaste pločevine: 3 mm, širina odprtine vrat: 400 mm, višina odprtine vrat: 350 mm, pomik po osi Z: 100 mm, JEWELliner "XS2" model: "Standard" with 20W CW laser power. - Developed and manufactured in Germany (proven) - Other models, laser powers, and options available on request. Engraving laser – marking laser – laser marking system with “Laser Class 1” protective housing. Our JEWELliner "XS2" marking laser is suitable for marking and engraving all metals, selected plastics, and ceramics. The compact housing size of L50 x W40 x H50 cm allows for space-saving integration into production environments. Applications: Jewelry, metal, and advertising industries Sample materials: Steel, stainless steel, gold, silver, titanium, aluminum, brass, copper, bronze, carbon, ceramics, Makrolon Application possibilities: - Graphic engraving (logos, drawings, hand sketches) - Photo engraving - Barcode (barcode, data matrix, QR code) - Serial number marking - Optional: inner ring engraving (e.g. name, date, symbol, handwriting) - Optional: outer ring engraving (e.g. name, continuous graphic, continuous pattern) - Optional: bangle engraving (inside and/or outside) - Text engraving (straight text, circular text, arched text, text symbols) - Handwriting engraving - Fingerprint engraving - Micro-engraving (micro text, minimum font size 0.15 mm) - Optional: rotary engraving (marking on round or curved surfaces) Compact design—all components are installed in the housing and sufficiently air-cooled! The machine is maintenance-free! Standard equipment JEWELliner "XS2" (BN20XS2-HR): - Fibre laser unit with deflection head and focus module Knodpjppxlmofx Afxed - Laser Class 1 protective housing with 140 x 100 mm protective viewing window - Manual door opening - Emergency stop switch - 180° field of view of the marking area inside the housing - Electrically adjustable Z-axis - Includes marking software (configurable) - Rotary axis included Technical specifications/data: Laser type: fibre laser CW output power: 20W Available frequency range: 28-64kHz Connection type: USB 2.0 Wavelength: 1064nm Standard lens: F-Theta 163 Marking field size: 70 x 70 mm (smaller sizes possible) Focal range: approx. 1.0 mm Minimum character height: 0.15 mm Minimum line width: 0.020 mm Cooling: air-cooled Maintenance: maintenance-free Power supply: AC 110V/240V – 50/60Hz, short-circuit proof Dimensions: L500 x W400 x H500 mm Weight: approx. 30kg The marking laser is ready for operation immediately after delivery and can be quickly integrated into your production process. Sample engravings can be produced on request. Images and illustrations may vary!

Stanje: rabljeno, Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 303211, skupna masa: 52 kg, Kompletni sistem, namizna naprava na podstavku, vključuje primež, pogon vretena preko tihega enosmernega motorja. Naprava je kombinirana s strojnim ogrodjem za sprejem velikih obdelovancev, višinsko nastavljiva, nagibna. Integriran program za graviranje, monitor, tipkovnica, pisava, shranjevanje na disketo. - Leto izdelave 2001 - popolnoma funkcionalna, pod napetostjo, pripravljena za demonstracijo - z navijalno napravo UNICA - Pirografirna naprava IS 200/UNICA z vretenom in transformatorjem - Pirotransformator - Stojalo za rezkarje - Delovna površina 225 x 80 mm - Z-hod 15 mm (pod vretenom 210 mm) - Motor vretena 20 W Knodpfsxni Spox Afxod - Hitrost vretena 17.000 min⁻¹ - Dimenzije 560 x 575 x 560 mm - Teža 52 kg - Št. stroja 303211

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, laserska moč: 20 W, 19" Built-in System – Model 2025 – the marking champion among laser engravers! Laser Class 4 Metals – plastics and much more! • EZCAD 3 (genuine 64-bit card) with up to 4 axes • Intel i5 or AMD Ryzen with 32GB RAM and ultra-fast M.2 SSD, integrated in the 19" rack-mount enclosure • 23" TFT monitor for fatigue-free working • Windows 11 Professional 64-bit pre-installed • Professional JPT MOPA fiber laser source with 20W power and up to 600 kHz (optional: variable pulse width and up to 200W power for color-annealing marking and cleaning) • "DigiScan Eco 10" scanning unit for high detail and precision • Scanning area approx. 100 x 100 mm (optional: 150/200/300 mm) • 19" aluminum rack enclosure Knjdpjuxnwmefx Afxsd • 2 m fiber cable incl. laser head mount for easy installation • Professional German-language marking software • Barcode and QR code support • Serial number functionality • Batch scanning from Excel file, network, or database! • Laser parameter finder using matrix across 2 parameters (e.g. frequency to speed, frequency to power) • TCP/IP connectivity. Various commands can now be transmitted to the software via TCP protocol. This allows for the seamless integration of external components like camera position detection. • Industry 4.0: System status can be processed at any time via TCP/IP protocol • Optocoupler-isolated inputs and outputs for automation (24V PNP logic) • New look & feel. A fresh design for even clearer and more comfortable operation • 3D preview for rotary axis processing • Up to 50% performance boost through 64-bit technology • Improved stability thanks to the latest drivers • Optional control of up to 4 axes WITHOUT switching, via PLUGINs • DEEP engraving function (slicer software for Z-axis control) • New, optimized hatching algorithms for highly efficient marking • New galvo generation (Eco, Hi-Speed & 3D) with dual laser pointer for visual focus check • Connection option for external fume extraction • Start button and EMERGENCY STOP on the housing, as well as external ports for X, Y, Z, and A axes • Operating manual and control software in German Optional extras include: => Enclosure for Laser Class 1, available as table or stand model with castors and space for extraction system => IPG or SPI fiber laser sources in various power ratings => LED status bar (green/yellow/red) => Scanlab equipment => Suitable extraction systems => Automation for part loading, conveyor belts, and much more! => 3D marking and ENGRAVING function => Automatic focus adjustment via specialized laser sensor => Rotary unit in various versions => Motorized X and Y axes => Interlock system for marking WITHOUT protective housing, using only PPE (personal protective equipment) for bulky parts Includes training at our training center in Schweinfurt! Our engraving lasers are manufactured in our Schweinfurt facility! Therefore, bespoke solutions are always possible! => Made in Schweinfurt! Images may show optional equipment! We are your partner for laser engraving machines and laser markers. Whether manual or automated laser marking systems, we are happy to provide you with a quote.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, UV laser engraving machine with 15 watt laser power Laser source with 355nm wavelength / 15 watts Demo unit, minimal operating hours (approx. 15 hrs) - incl. Windows 10 Pro 64-bit PC system - incl. 22" monitor - fully installed and calibrated - engraving software in German - 3D software (MM3D) - very easy to operate - switch on and start immediately - UV laser source with 15 watts for high-contrast, fast marking with extremely high resolution - engraves practically all metals (stainless steel, brass, aluminium, etc.) - engraves practically all plastics (including PVC, silicone, etc.) - engraves real glass (including crystal glass) - glass cutting possible - heavy-duty industrial quality - complete system / ready for immediate use Kodpfx Ajflrnaofxsnd - working area approx. 500 x 600 x 600 mm (WxDxH) - mounting surface with threaded holes in a 50mm grid - LED workspace lighting - 50mm tube connection for fume extraction - engraving area approx. 150x150 / 200x200 / 300x300 (switchable) - 3D scanner for marking irregularly shaped surfaces - incl. foot switch to start engraving process Sale exclusively to commercial customers. Delivery / consultation / sales only in Germany / Austria / Switzerland Leasing or hire-purchase available via our financing partner. Machine dimensions approx.: Width: 800mm Height: 1800mm Depth: 1000mm Weight: approx. 150kg

Stanje: potreben popravila (rabljeno), Leto izdelave: 2019, IMPACT EU + PN12 STD CORD DOT PEEN MARKER - IMPACT P 1 pneumatic marking system IMPACT P (78701) Marking area: 120x100 mm; Manually adjustable Z-axis (max height 300 mm) Robust metal housing with precise guides Intuitive operation via color touchscreen Powerful integrated T08 software (including Automatic date and time stamping, counter, duplicate checking, marking preview, database connection (CSV, Excel, Access) Marks text, numbers, logos, 2D codes (DataMatrix, etc.) Character height: 1 mm to 100 mm Interfaces: Ethernet TCP/IP, RS232, USB, FTP, Ksdpewpu Eysfx Afxend specific inputs/outputs Supplied with the following basic equipment: Standard marking tool PN12-60°, Maintenance unit, stainless steel table, touchscreen with integrated software T08, Technical manual for commissioning on DVD Dimensions: 431 x 270 x 704 mm (L x W x H) - Weight: 26 kg

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, laserska moč: 30 W, vrsta nastavitve višine: električni, valovna dolžina laserja: 1.064 nm, The LAS 22 is a compact desktop unit with a small working area, ideal for marking small components. Thanks to its compact design, the system is extremely user-friendly and can be used virtually anywhere. Kjdpouy H Nqsfx Afxond The universally applicable LAS 22 laser marking system from Systemtechnik Hölzer GmbH is suitable for a very wide range of marking applications. With the integrated fiber laser, you can mark almost any material, such as steel, carbide, aluminum, and plastics. Depending on requirements, the system can be equipped with a 20 or 30-watt fiber laser. In many industries, laser marking is essential for permanent markings. The powerful laser software allows you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks, without requiring extensive programming knowledge. The software can automatically increment serial and article numbers after initial configuration. Moreover, the software can read data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer it to predefined fields. Using a hand scanner is also possible. Standard equipment includes a laptop with Windows operating system and laser software. Optionally, the LAS 22 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - Fiber laser 30 watt (optional: 20 watt) - Laser class 1 - Wavelength: 1064 nm - Marking field size: 110 x 110 mm - Marking software EZCAD in German / English - Pilot laser (easy preview, contour preview) - Focus finder (simple focusing) - Max. workpiece height approx. 95 mm - Grid holes for fixtures - Clamping area: 310 x 190 mm - Electrically adjustable Z-axis - Electric door with pinch protection stop - Optional: extraction system (incl. activated carbon filter) - Welded steel sheet construction - Connection: 230 V - Air-cooled - Laptop with Windows OS (German or English) - Dimensions (LxWxH): 600 x 400 x 690 mm - Weight: approx. 45 kg

Stanje: novo, Leto izdelave: 2024, številka stroja/vozila: BN120XT-HA-X,

Stanje: Okvarjen nosilec rezervnih delov (rabljen), Okvarjen gravirni stroj Deckel Knodpfxjw H Rdtj Afxod

Stanje: rabljeno, Leto izdelave: 1994, x-axis travel: 0 mm y-axis travel: 0 mm Kedpfxjt Hw Dqs Afxend z-axis travel: mm Total power requirement: kW Machine weight approx.: t Space requirement approx.: m Marking machine with rotary table (bevel gears), 4 axes, PV 70 head with WINGRAED and WINSMAT software

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, 1 rabljena: Univerzalni pantografski gravirni stroj • Model: Fridrich Deckel GK 12 Ksdpfx Afexa Ap Esxond • Namen uporabe: Fina graviranja, kopirno rezkanje, modelarska dela • Delovno območje (obdelovanec): pribl. 200 x 350 mm • Območje kopirne predloge: pribl. 320 x 450 mm • Povečava/pomanjšava: 1:1,5 do 1:10 • Leto izdelave: neznano • Motor vretena: pribl. 250W • Hitrost vretena: Več stopenj, prilagodljiva • Stanje: Rabljeno, preizkušeno, popolnoma delujoče

Stanje: potreben popravila (rabljeno), Leto izdelave: 2019, IMPACT EU + PN12 STD CORD Kedpfxjwpu R No Afxsnd DOT PEEN MARKER – IMPACT P 1 pneumatic marking system IMPACT P (78701) Marking area: 120x100 mm; Manually adjustable Z-axis (maximum height: 300 mm) Sturdy metal housing with precise guides User-friendly operation via color touchscreen High-performance integrated software T08 (including automatic date and time stamping, counter, duplicate check, marking preview, database connectivity (CSV, Excel, Access)) Marks texts, numbers, logos, 2D codes (DataMatrix, etc.) Character height from 1 mm to 100 mm Interfaces: Ethernet TCP/IP, RS232, USB, FTP, specific inputs/outputs Supplied with the following basic equipment: Standard marking tool PN12-60°, maintenance unit, stainless steel table, touchscreen with integrated T08 software, technical manual for commissioning on DVD Dimensions: 431 x 270 x 704 mm (L x W x H) – Weight: 26 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Rabljeni BRM laserski/gravirni stroj. - Letnik 2017 - Takoj na voljo Kedpfx Ajw N E Drsfxjnd - V dobrem stanju - 100W laser

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: JEWELliner "XS" PRO Modell "Premium", vrsta vhodnega toka: Klimatska naprava, laserska moč: 30 W, skupna širina: 400 mm, skupna višina: 500 mm, skupna dolžina: 600 mm, skupna masa: 55 kg, trajanje garancije: 12 meseci, vrsta nastavitve višine: električni, širina odprtine vrat: 400 mm, višina odprtine vrat: 200 mm, valovna dolžina laserja: 1.064 nm, Developed, manufactured, and tested in Germany. JEWELliner "XS" model "Premium" available with 30W CW and camera - Electric lift door – auto-focus – compact machine size - - Developed and manufactured in Germany - Further models, power ratings, and options available on request. Engraving laser – marking laser – laser marker with "Laser Class 1" protective enclosure. Our JEWELliner "XS-PRO" model "Premium" marking laser is suitable for marking and engraving all metals, select plastics, and ceramics. The machine dimensions are L60 x W40 x H50 cm, allowing for space-saving integration into production environments. Applications: Jewelry, metal, and advertising industries. Material examples: Steel, stainless steel, gold, silver, titanium, aluminum, brass, copper, bronze, carbon, ceramics, Makrolon. Application possibilities: - Graphic engraving (logo, drawing, hand-drawing) - Photo engraving - Barcode (bar code, Data Matrix, QR code) - Serial number marking - Inner ring engraving (e.g., name, date, symbol, handwritten)—optional - Outer ring engraving (e.g., name, continuous graphic, continuous pattern)—optional - Bangle engraving inside and/or outside—optional - Text engraving (straight text, circle text, text arc, text symbols) - Handwriting engraving - Fingerprint engraving - Micro engraving (microtext down to min. 0.25 mm character height) - Rotary engraving (marking on round or curved surfaces)—optional Compact construction, all components integrated in the housing and efficiently air-cooled! The machine is maintenance-free! Standard equipment JEWELliner "XS" PRO (BN30XS-HRA): - Fiber laser unit with deflection head and focus module - Laser Class 1 safety housing with 200x140 mm viewing window - Automatic door opening - Emergency stop switch - 180° view of the marking area within the housing - Z-axis with auto-focus – motorized - Rotary axis with removable jewelry chuck - Incl. marking software (final configured) - High-resolution industrial camera USB 3.1 Technical specifications / data: Laser type: fiber laser Output power CW: 30W Available frequency range: 1.8 - 2,000kHz Connection type: USB 2.0 Wavelength: 1064nm Lens (delivered): F-Theta 163 Marking field size: 110 x 110 mm (smaller sizes available) Focusing range: approx. 1.7 mm Min. character height: 0.25 mm Min. line width: 0.023 mm Cooling: air-cooled Maintenance: maintenance-free Power supply: AC 110V/240V – 50/60Hz, short-circuit proof Dimensions: L600 x W400 x H500 mm Weight: approx. 55 kg The marking laser is ready for operation immediately after delivery and can be quickly integrated into your own production process. We are also happy to produce engraving samples for you. Kjdpfxoppxmks Afxend Images and illustrations may differ.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Fiber Laser Marking and Engraving Machine Galvo fiber laser marking and engraving machine for metals and plastics. Working area: 150 x 150 mm Knsdpfx Afouxc Nwsxed Power: 30 W Galvanometric head Electric Z-axis, 250 mm Maximum speed: 7,000 mm/s Minimum line thickness: 0.02 mm Software included Supported formats: BMP, JPG, JPEG, GIF, TGA, PNG, TIF, AI, DXF, DST, PLT Machine dimensions: 800 x 800 mm Machine weight: 150 kg Standard accessories included: Software, USB cable, European power cable, external laser start foot pedal, installed optics, red laser pointer for positioning, anti-radiation protective cover, eye protection Optional accessory: 110x110 mm focal lens CE certifications Processable materials: Metals (steel, iron, aluminum, brass, silver, gold, etc. + anodized, painted, chromed) Plastics and polymers (ABS, PP, PE, PC, PET, PES, PEEK, etc. + painted)

Stanje: dober (rabljeno), Leto izdelave: 1980, Gravirni in kopirni rezkalni stroj Proizvajalec: DECKEL Tip: GK 21 Leto: ca. 1980 Knsdpfx Ajvk D A Eefxjd Maks. premer rezkarja: 10 mm Hitrost vretena: 475 - 20.000 obr/min Pomiki: 160 mm Y, 300 mm Z, 365 mm Miza: 200 mm X 360 mm Strojni omarici z veliko dodatne opreme in tehnično dokumentacijo priloženi. Teža: 620 kg.

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: JEWELliner XS30-PRO Std, vhodna napetost: 230 V, vrsta vhodnega toka: Klimatska naprava, laserska moč: 30 W, vrsta hlajenja: zrak, skupna širina: 400 mm, skupna višina: 500 mm, skupna dolžina: 600 mm, skupna masa: 55 kg, trajanje garancije: 12 meseci, vrsta nastavitve višine: električni, širina odprtine vrat: 400 mm, višina odprtine vrat: 200 mm, valovna dolžina laserja: 1.064 nm, Developed, manufactured, and tested in Germany. JEWELliner "XS-PRO" Standard model available with 30W CW includes: An electric lift door, auto-focus functionality, and a compact machine footprint, allowing the device to fit in various workspaces. - Developed and manufactured in Germany - Further models, power ratings, and options available upon request. Engraving laser – marking laser – laser with "Laser Class 1" safety enclosure. Our JEWELliner "XS-PRO" Standard model marking laser is designed for engraving and marking all metals, selected plastics, and ceramics. The machine dimensions are L60 x W40 x H50 cm, allowing for space-saving integration into production environments. Applications: Jewelry, metalworking, and advertising industries Sample materials: Steel, stainless steel, gold, silver, titanium, aluminum, brass, copper, bronze, carbon fiber, ceramic, and Makrolon (polycarbonate). Application possibilities: - Graphic engraving (logos, drawings, sketches) - Photo engraving - Barcode (linear, Data Matrix, QR code) - Serial number marking - Inside ring engraving (e.g., name, date, symbol, script) optional - Outside ring engraving (e.g., name, continuous graphic/pattern) optional - Bangle (bracelet) inside and/or outside engraving – optional - Text engraving (straight text, circular text, arc text, text symbols) - Handwriting engraving - Fingerprint engraving - Micro engraving (micro text down to min. 0.25 mm character size) - Rotary engraving (markings on round or curved surfaces) optional Compact construction, all components are integrated in the housing and adequately air-cooled! The machine is maintenance-free! Standard equipment JEWELliner "XS" PRO (BN30XS-HRA): - Fiber laser unit with beam deflection head and focusing module - Laser Class 1 safety housing with 200x140 mm protective viewing window - Automatic door opening - Emergency stop switch - 180° view of marking area within the enclosure - Z-axis with electrically operated auto-focus - Includes BNMARK5 marking software! Made in Germany! Developed by BN Laser - Optional: rotary axis with removable jewelry chuck Technical specifications / data: Laser type: Fiber laser Output power CW: 30W Available frequency range: 22,000 - 820,000 Hz Connection: USB 2.0 Wavelength: 1064nm Lens (standard): F-Theta 163 Marking field size: 110 x 110 mm – smaller available upon request Focus depth: approx. 1.7 mm Min. character height: 0.25 mm Min. line width: 0.023 mm Cooling: Air-cooled Maintenance: Maintenance-free Power supply: AC 110V/240V – 50/60Hz, short-circuit protected Dimensions: L600 x W400 x H500 mm Weight: approx. 55 kg The marking laser is ready for operation upon delivery and can be quickly integrated into your production environment. We are happy to produce engraving samples for you as well. Images may differ from actual product. Knsdpfec Rmy Nsx Afxsd