Stojalo Za Vrtanje nakup rabljenega (108.832)

Stanje: dober (rabljeno), Leto izdelave: 1983, številka stroja/vozila: 7346, Offer 24016 Technical Data: - Drilling capacity: 22 mm - Drill spindle taper: MT 2 - Drill spindle stroke: 100 mm - 4 spindle speeds: 355 – 710 – 1400 – 2800 rpm - Throat depth: 210 mm - Machine table: 480 x 420 mm - Min./max. distance spindle/table: approx. 190 / 340 mm - Drive: 400 V / 1.1 kW - Required space: approx. W 450 x H 1200 x D 700 mm Dodpfx Afsrwmbgslskg - Weight: approx. 170 kg

Stanje: dober (rabljeno), Leto izdelave: 1980, številka stroja/vozila: 334, Offer 19194 Technical Specifications: - Drilling capacity: 22 mm - Spindle taper: MT 2 - Spindle stroke: 100 mm - 4 spindle speeds: 355 / 710 / 1400 / 2800 rpm - Clockwise and counterclockwise rotation - Throat depth: 210 mm - Machine table: 480 x 420 mm - Distance from machined base plate to spindle: 190 / 340 mm - Drive: 400 V / 0.8 / 1.0 kW Dodperwl Nnefx Aflokg - Space requirement (W x H x D): 450 x 1200 x 700 mm - Weight approx.: 170 kg

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Drilling capacity in St 60: 40 mm Thread cutting in St 60: M 24 Thread cutting in GG 20: M 30 Short spindle: MK 3 Drilling stroke: 120 mm Throat depth: 293 mm Column diameter: 115 mm Machine table – usable surface: 514 x 360 mm T-slots number – width – spacing: 2 x 14 x 224 mm Distance spindle to machine table min./max.: 117/701 mm Feed: 0.10 + 0.20 mm/rev Spindle speeds: 160–2,250 rpm Total power requirement: 1.45/1.9 kW Machine height: 1,840 mm Machine weight approx.: 285 kg Standard equipment: - Mushroom push button (latching) for emergency stop - Directional switch for clockwise/counterclockwise rotation Djdpfx Aoifkpweflekg - Motor protection switch - Infinitely variable speed control - Digital speed display - Feed overload protection - Protection class IP 54 - Plug connector (pre-assembled, cable length 2 m) - Spindle guard with electrical interlock

Stanje: kot nova (razstavni stroj), pneumatic single-head boring machine with 21 spindles MAGGI Model: Boring System 21 STANDARD EQUIPMENT: - Aluminium fence with 2 stops (each 1,500 mm, right and left) - No. 5 quick-change chucks - No. 2 patented safety pneumatic hold-down cylinders - Connector for suction/extraction unit compliant with EU standards KEY FEATURES: - Worktable made of cast iron - Boring head made of aluminium - Patented spiral system for fine adjustment of drilling depth - Pneumatic lowering of the boring head, lockable in any position between 0° - 90° - Extendable cast iron side stops with millimetre adjustment, readable on a scale with magnifier - Drill height adjustment via digital counter with decimal display - Fixed stops, 37 mm, for cup hinges - Machine constructed according to CE standards TECHNICAL DATA: - Boring spindles (left red/right black): 21 pcs. (10/11) - Distance between boring spindles: 32 mm - Working width: 640 mm - Max. drilling depth: 65 mm Dksdpfx Aed Supgefleg - Number of pneumatic hold-down cylinders: 2 pcs. - Max. workpiece size: 900 x 3000 x 60 mm - Max. workpiece height: 65 mm - Number of motors: 1 pc. - Motor power: 1.5 kW, 400 V, 50 Hz - Motor speed: 2800 rpm - Working pressure: 6-8 bar - Standard air consumption per cycle: 10 l/cycle - Extraction port diameter: 80 mm - Worktable height: 860 mm Overall dimensions (approx.) L x W x H: 1030 x 1030 x 1285 mm Weight (approx.): 260 kg

Stanje: dober (rabljeno), Leto izdelave: 1987, številka stroja/vozila: 140379007,

Stanje: dober (rabljeno), Data: - Manufacturer: Besana - Model: Besana 70/2TC Dodpsi D Ed Nefx Aflokg - From ongoing production - Max. outreach to the rear: 1200 mm - Max. drilling diameter: 300 mm - Table dimensions: 1200 x 1200 mm - Machine dimensions: D 2400 x W 1200 x H 1800 mm - Equipped with water pump and recirculating cooling system - Lower drill operates automatically with compressed air, upper drill is manually operated - Weight: 1200 kg Price on request

Stanje: rabljeno, Rabljeni stroj Oprema in tehnični podatki: - dvostranski vrstni vrtalni stroj - 2 vrtalna motorja po 1,8 kW, z oljnim zavornim cilindrom - hod maks. 130 mm - s pnevmatskim preklopnim ventilom - 21 vreten, razmak vreten 32 mm - maksimalna razdalja vrtanja 640 mm (s premikanjem obdelovanca maks. 2656 mm) - portalni prehod 850 mm Dodpfjwlwpgex Aflskg - poraba zraka pri 5 bar cca 11 l na takt - sesalni nastavek 160 mm Mere: pribl. 3100 x 1100 x 1800 mm Teža: pribl. 350 kg Razpoložljivost: kratkoročno Lokacija skladišča: 63934 Röllbach

Stanje: novo, ALZMETALL column drilling machine, drilling capacity in steel: 30mm Short taper spindle MK3, spindle stroke: 140mm, throat depth: 293mm, column diameter: 115mm, usable machine table surface: 514x360mm, with T-slots 2 x 14mm x 224mm, spindle-to-table distance min./max.: 132/724mm, machine table height adjustment via hand crank, manual feed, machine height without options: 1790mm, net weight: 260kg. - Infinitely variable speed 100-1800 rpm Standard features: mushroom pushbutton (latching) for EMERGENCY STOP, reversing switch for clockwise/anticlockwise operation, motor protection switch, stepless speed adjustment, digital speed display, protection class IP54, spindle guard with electrical interlock, finish: DD textured paint signal white RAL 9003, PANTONE 7545c, black Dodpoid I Ixofx Aflskg Including the following options: LED machine lamp, Pos. 12. Delivery time: from stock Waiblingen Beinstein

Stanje: novo, 4 lepilne palice, 1 pritisna prečka, hidravlična, z mehansko enoto okvirnega stiskalnika. Zunanje mere D x V 3000 x 2000 mm, približno 200 kg. Dksdpfx Afjvrv H Sslsg

Stanje: rabljeno, številka stroja/vozila: 006601, Pozicija 1: Nakladalec PRIESS-BMA DLS-CNC Djdpfx Aewuclrsflokg Pozicija 2: CNC stroj za vrtanje in vstavljanje moznika PRIESS-BMA DLS-CNC

Stanje: zelo dobro (rabljeno), Celoten Red Baron s 3 vrtalnimi glavami Dkedpfx Asxl Ecljfleg

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 4.440 mm, skupna širina: 1.487 mm, skupna višina: 2.793 mm, vhodna napetost: 400 V, skupna masa: 1.900 kg, vhodni tok: 16 A, Oprema: dokumentacija / priročnik, EXPOGLASS® PRIAM je sodoben vertikalni stroj za vrtanje stekla, opremljen z elektronskim pomikom, samodejnim merjenjem dolžine svedra in debeline stekla. Stroj zagotavlja visoko natančnost, gladko delovanje in čiste robove tudi pri velikih premerih vrtanja. Poljski izdelek – trdna, enostavna in zanesljiva konstrukcija, zasnovana za intenzivno vsakodnevno uporabo v steklarskih delavnicah. Tehnične specifikacije Dolžina – 4440 mm Višina – 2793 mm Širina – 1487 mm Teža – 1900 kg Upravljanje – 7” HMI-zaslon in analogni gumbi Pomik vretena – samodejen Nadzor pomika – elektronski Dkjdpoh Ek H Sjfx Aflog Nadzor nalagalne letve – elektronski Hitrost vrtenja vretena – od 700 do 2800 vrt/min Merjenje položaja konice svedra – samodejno Način menjave svedrov – s spuščanjem mize in blokado vretena Nastavitev globine vrtanja – elektronska (izračunana s krmilnikom) Vodoravno pozicioniranje – dvoredni sistem ročnih omejevalnikov Število ročnih omejevalnikov – 6 kosov Pritisk materiala – pnevmatski Funkcija posnemanja robov lukenj – nameščena, elektronsko nadzorovana Prostori v omarici za svedre – 70 svedrov Merjenje premera svedra – 5 mm (+/–) Natančnost merjenja debeline stekla – 0,2 mm Garancija – 12 mesecev Servis po garanciji – DA, proti plačilu

Stanje: zelo dobro (rabljeno), Leto izdelave: 1988, x = 560 · y = 500 · z = 450 · 5000 vrt/min Dodsx Rdidopfx Aflskg · tog kotniški stroj · kabina proti pršenju ----- Stroj je bil obnovljen in ga je mogoče šteti za kot novega. Vsi obrabni deli so bili zamenjani. Kotna miza je bila ponovno obdelana, stroj pa delno prebarvan. Vodila so bila na novo postružena.

Stanje: dober (rabljeno), Leto izdelave: 1981, Ref. No.: 10447 Manufacturer: SKODA Model: WD 200 Year of manufacture: 1981 Retrofit: 2010 Control type: CNC CNC control: SIEMENS SINUMERIK 840D Warehouse location: Halberstadt Country of origin: Germany X-axis travel: 9000 mm Y-axis travel: 4000 mm Z-axis travel: 1450 mm W-axis: 2000 mm Bed width: 2000 mm Bed height: 550 mm Spindle diameter: 200 mm Quill travel: 1600 mm Rotary table (L x W): 4000 x 4000 mm Table load capacity: 80,000 kg Clamping area: 3000 x 3000 mm Spindle speed: 257 – 2570 rpm Spindle taper: 120 Automatic feeds: 342 mm/rev Stepless spindle speeds: 1.5 – 630 rpm Max. torque at boring spindle: 20,000 Nm Rapid traverse: 16,000 m/min Spindle motor power: 9.8 – 35.5 kW Total power requirement: 75 kW Drilling depth: 2000 mm Vertical movement of spindle head on column: 3150 mm Cross movement of column on bed: 4000 mm Lowest position of spindle axis above bed: 1100 mm Spindle speed during quill feed forward: 1.6 – 300 max. rpm Stepless drilling feeds (spindle, quill): 1.6 – 1600 mm/min Stepless milling feeds (spindle head vertical, column horizontal): 1.6 – 1600 mm/min Machine length: 11,350 mm Machine width: 5,450 mm Machine height: 7,350 mm Machine weight approx.: 65 t Dksdpfsx Sw Ezsx Aflsg Additional information: Thread cutting: 22 metric threads, pitch range 0.5 – 12 mm 32 Whitworth threads, pitch range 28 – 1 (TPI) Accessories: - Tool console - 1 set of operating tools - Discharge and clamping wedges for spindle - Grease gun - 1 set of spare parts for electrical equipment - Base plate for clamping - Steady rest with electrical equipment The machine can be inspected under power by appointment.

Stanje: novo, Standardno opremljena sa 2 ekscentrična stega i motor zaštitnim prekidačem. Uključuje fiksiranje dužine i dubine bušenja. Graničnik za serijski rad može se koristiti obostrano. Jedinica za bušenje sa mogućnošću zakretanja na obe strane. Westcott držač burgije mm sa zaštitnim poklopcem. Lako podesiva visina jedinice za bušenje pomoću ručnog točka. Unakrsni suport može se lako podešavati jednom rukom. Sa uređajem za tiplovanje i graničnikom za sečenje pod uglom, proizvodnja EU! Tehnički podaci: Razmak rupa za bušenje: 16, 22, 25 i 32 mm Veličina stola: 600 x 320 mm Dkedpfx Afox H Ucmoljg Dubina bušenja: 205 mm Dužina bušenja: 250 mm Podešavanje visine: 165 mm Zakretanje jedinice za bušenje: 45° na obe strane Broj obrtaja motora: 2840 o/min Izlazna snaga motora: 3 kW S6 (2,2 kW S1) Težina: 180 kg

Stanje: rabljeno, številka stroja/vozila: 005910, Delovno območje X-os: 2500 mm Delovno območje Y-os: 1300 mm Moč glavnega vretena: 6 kW Število krmiljenih osi: 3 osi Dodpfowuckhex Afljkg Število vrtalnih vretenc: 84

Stanje: rabljeno, Leto izdelave: 1971, Technical Details: Max. face turning diameter: approx. Ø 900 mm Dedpfou Idtpex Aflekg Spindle speed: 12.5 - 2000 / 24 steps rpm Faceplate speed: 8 - 190 / 12 steps rpm Feed rates (faceplate): 0.03 - 3 mm/step Rapid traverse (all axes): 2000 / 4000 mm/min Tool holder (work spindle): ISO 50 / SK50 Clamping area (table): 700 x 800 mm Table rotation: 360° Cross traverse of drilling table: 800 mm Max. table load: 1500 kg Total power requirement: approx. 11.0 kW Machine weight: approx. 7800 kg Dimensions (L x W x H): approx. 3.0 x 2.0 x 2.6 m Control cabinet dimensions: 1800 x 400 x 1950 mm Faceplate Ø: 420 mm Faceplate slide travel: 180 mm Max. face turning diameter: approx. 900 mm Longitudinal travel of column: 700 mm Vertical travel of spindle headstock: 700 mm Feed drive of column, spindle headstock and clamping table: - In spindle operation: 0.20 - 10 mm/rev, 34 steps - In faceplate operation: 0.16 - 16 mm/rev, with steps Equipment: Optical precision measuring system/Heidenhain linear scale for X/Y/Z/C-table axes Hydraulics Machine feet/base plates Operator panel with pendant arm

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 4.440 mm, skupna širina: 1.487 mm, skupna višina: 2.793 mm, vhodna napetost: 400 V, skupna masa: 1.900 kg, vhodni tok: 16 A, Model Priam je dvovretenski (dvostranski), vertikalni vrtalni stroj za steklo, ki je naprava, zasnovana za stranke, ki iščejo funkcionalen, enostaven za uporabo in trpežen stroj. Expoglass Priam - funkcionalnost na najvišji ravni: - Samodejno merjenje debeline stekla ⦁ 2 vreteni (spredaj in zadaj) - omogočata vrtanje stekla v enem prehodu - brez obračanja ⦁ Elektronsko krmiljena nakladalna palica - za nastavitev dimenzije spodnjega roba stekla od odprtine samo vnesite želeno dimenzijo na zaslon na dotik - stroj se bo postavil v ustrezen položaj Mode Način hitre menjave svedra - po pritisku gumba za zamenjavo svedra se obe vreteni samodejno zakleneta (ni jih mogoče obračati), navpična miza, ki je med obema svedroma, zdrsne navzdol - s tem se odpre velik prostor med njima. To pomeni, da je svedre praviloma mogoče odviti brez uporabe enega samega ključa (v najslabšem primeru le enega) in na voljo vam je veliko prostora za udobno izvajanje te operacije. ⦁ Samodejno merjenje dolžine in položaja svedra - po zaključku menjave svedra poteka samodejna kalibracija - izmeri se njihova dolžina, zahvaljujoč kateri stroj ve, na kakšni razdalji se nahaja vrtalna ploskev vsakega svedra od stekla - zelo pomembno v majhnih obratih, kjer ni narejenih serij, vendar je večina lukenj opravljeno individualno ⦁ Samodejni izračun globine vreten - po samodejni kalibraciji vreten mora zaposleni na zaslonu na dotik nastaviti le debelino izvrtanega stekla in stroj bo samodejno izbral idealne vrednosti vodnjakov, naloga operaterja pa bo, da klikne gumb - »vrtanje«, ki bo potekal popolnoma samodejno ⦁ Elektronsko krmiljeno vretensko podajanje - omogoča znatno povečanje zmogljivosti stroja, poleg tega, da omogoča delovanje večine zgoraj navedenih funkcij, pa tudi omogoča, da se vrednosti podajanja popolnoma prilagodijo vsaki situaciji in hkrati spremenijo z nekaj kliki na zaslonu. To na primer ponazarja ⦁ Samodejna nastavitev vrtenja na sveder - vse, kar morate storiti, je vnesti premer svedra na zaslon na dotik in stroj bo samodejno izbral določeno hitrost vrtenja Dkedpfx Afsd S Uhqsljg Illing Vrtanje v zaprti komori

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.200 mm, pomik osi Y: 2.000 mm, pomik po osi Z: 700 mm, največja hitrost vretena: 1.500 obr/min, hitrost vretena (min.): 5 obr/min, dolžina podajanja os X: 1.200 mm, dolžina pomika po osi Y: 2.000 mm, dolžina podajanja os Z: 700 mm, hitrost pomika os X: 1.000 m/min, hitrost podajanja osi Y: 1.000 m/min, hitrost podajanja os Z: 1.000 m/min, skupna širina: 4.000 mm, San Rocco horizontal boring mill, fully overhauled, from a high-quality aerospace manufacturing operation. CNC control system: Siemens SINUMERIK 840D with SIMODRIVE 611 drive system. The machine is equipped with modern digital drives and is suitable for high-precision multi-axis machining in continuous operation. The machine was overhauled in 2024 and received brand new telescopic covers on all axes, as well as numerous additional minor but essential refurbishments to the hydraulics, CNC control, hoses, and all types of seals. The machine is comprehensively equipped with coolant system, etc. Travel distances: X-axis (longitudinal): 1,200 mm Y-axis (cross): 2,000 mm Z-axis (vertical / spindle axis): 700 mm Spindle data: Boring spindle diameter: 100 mm Tool holder: ISO 50 Milling spindle diameter: 185 mm Spindle axial stroke: 700 mm Feeds and rapid traverses: Automatic feed, spindle and vertical axis: 2 × 1,000 mm/min Dkjdpfxjx Rhlce Aflsg Rapid traverse, spindle and vertical axis: 5,500 mm/min Clearances: Min. spindle height above table: 0 mm Max. spindle height above table: 1,500 mm Maximal distance spindle nose to table center: 1,850 mm Spindle speeds: Torque range: 5 to 14 rpm Continuous power range: 15 to 1,450 rpm Number of gear stages: 4 Speed ranges: 6–51 / 49–160 / 140–460 / 440–1,450 rpm Table data: Rotary table size: 1,100 × 1,300 mm Longitudinal travel: 1,200 mm Cross travel: 2,000 mm Table feeds: Automatic feeds X and Y: 1,000 mm/min each Rapid traverse X and Y: 5,500 mm/min each Table rotation: Continuous rotation: 30 to 100 degrees per minute Rapid rotation: 5,000 degrees per minute Drive system: Siemens SIMODRIVE 611 E R module 36/47 kW LT modules 108 A and 2 × 25 A Lifting & transport data: Group 1: Steel bar, diameter 70 mm, length 1,600 mm Steel bar, diameter 70 mm, length 2,400 mm Four spacer rings for lifting slings Four steel cables, diameter 22 mm Weight approx. 12,500 kg Group 2: Two steel cables, minimum diameter 18 mm Weight approx. 3,500 kg Group 3: Manual lifting Weight approx. 1,300 kg Condition: The machine is in very good technical condition and can be inspected and tested under power by appointment.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2008, WFL Millturn M120X/3000 WORKING AREA Distance between centers = 3000 mm Swing diameter over bed = 1220 mm Swing diameter over top slide = 1140 mm Longitudinal travel (Z) = 3330 mm Cross travel (X) = 920 mm Distance spindle nose to tailstock tip = 3812 mm TURNING SPINDLE Spindle head DIN 55026, form A15 Spindle bore 165 mm MAIN DRIVE AC drive with 2-speed gearbox Drive power 100% duty cycle: 60 kW Max. spindle speed: 1600 rpm Max. spindle torque (100% duty cycle): 4472 Nm C-AXIS. SERVO-CONTROLLED MAIN SPINDLE Djdjl Smhlspfx Aflskg Smallest programmable increment: 0.001° Max. rotational speed: 20 rpm Max. spindle torque (100% duty cycle): 3000 Nm Holding torque of disc brake: 6000 Nm FEED DRIVE Cross slide, turning-milling unit: AC servo drive Feed force longitudinal (Z): 30.0 kN Feed force cross (X): 31.5 kN Feed force Y-axis (55 kW): 25.0 kN Rapid traverse speed: longitudinal (Z): 15.0 m/min cross (X): 15.0 m/min Y-axis: 12.5 m/min Rapid traverse swivel B-axis: 90°/s BALL SCREW LONGITUDINAL (Z-axis): ø x pitch mm: 63x20 CROSS (X-axis): ø x pitch mm: 63x10 TAILSTOCK Quill diameter: 180 mm Quill stroke: 200 mm Quill force (adjustable): 5400-40000 N Quill with integrated bearing: MK 6 TOOL CARRIER (Single tool carrier, turning-milling unit) AC drive, drive power 100% duty cycle: 55 kW Max. spindle speed: 3200 rpm Max. spindle torque (100% duty cycle): 730 Nm Travel perpendicular to X/Z-plane (Y-axis, 55 kW): 650 mm (-300/+350) Swivel range of milling spindle (B-axis): -110°/+90° Spindle interface for tools as per DIN 69893 HSK-A100 Milling spindle diameter in front bearing: 130 mm TEMPERATURE STABILIZATION By regulated cooling circuit with compressor cooling unit EXTERNAL TOOL MAGAZINE: Number Storage stations (coded): HSK100 size, 90 pcs Max. tool length: 500 (800) mm Max. tool weight: (Center of gravity distance for 25 kg, max. support surface 250 mm) DIMENSIONS Length (max., with chip conveyor and tool magazine): 13 m Height: 4.1 m

Leto izdelave: 2007, Stanje: pripravljen za uporabo (rabljen), Glavni pogon Število osi: 5 Gibanje Gibanje po osi X: 3500 mm Gibanje po osi Z: 1500 mm Gibanje po osi Y: 1200 mm Ta petosna TOS Varnsdorf WHN130 je bila izdelana leta 2007. Opremljena je s horizontalnim vrtalno-rezalnim strojem z dimenzijo mize 1800 × 1800 mm in premerom vretena 130 mm. Stroj ima vrtljivo mizo in ga upravlja sistem NCT-104. Razmislite o nakupu tega vrtalnega stroja TOS Varnsdorf WHN130. Kontaktirajte nas za več informacij. Djdpfox Imtasx Aflskg Vrste uporabe Druga obdelovalna orodja

Stanje: rabljeno, številka stroja/vozila: 005449, Pozicija 2: CNC vrtalni stroj MORBIDELLI-FLEXA 912+FLEXA 902 Pozicija 3: Horizontalna pretočna vrtalna in moznikaška naprava MORBIDELLI-FLEXA 912+FLEXA 902 Dkodpfx Afswucl Eeleg

Stanje: novo, Leto izdelave: 2026, Description Double Grinding Machine TS 200 SD P with EXTRACTION UNIT, machine stand, emergency stop push button, and brake smooth-running, maintenance-free motor side-closed protective covers sturdy, adjustable workpiece supports high safety comfort with adjustable spark deflectors suitable for grinding, deburring, and sharpening tools of all kinds, metal profiles, etc. motor protection switch and undervoltage release dual-sided spark/eye protection connecting cable with 16 A CEE plug 1 coarse and 1 fine grinding wheel included 12 months warranty for single-shift operation - Extraction nozzle Ø (mm): 42 - Grinding wheel (mm): 200 x 32 x 32 - Machine dimensions without packaging (mm): 250 x 470 x 230 - Speed (rpm): 2550 - Motor three-phase 400 V (kW): Operating mode S2-30 min (short-time operation) - Weight (kg): 60 DELIVERY: FREE TO YOUR DOOR (within Germany) NOT THE RIGHT MACHINE? WE ARE OFFICIAL FLOTT PARTNERS AND CAN OFFER YOU ANY PRODUCTS FROM THE COMPLETE FLOTT RANGE! Djdpfx Afor Eqzfelskg ASK US FOR AN OFFER!

Leto izdelave: 2007, Stanje: generalkompletno obnovljen (rabljeno), CNC TURNING-MILLING-DRILLING CENTER M35 MILLTURN WITH TAILSTOCK AND SINUMERIK 840D PL CONTROL WORKING RANGE Max. turning diameter: mm 420 Longitudinal travel upper slide (Z): mm 2150 Cross travel upper slide (X): mm 550 Distance spindle nose to tailstock center: mm 2300 Turning length (depending on clamping device) approx.: mm 2090 TURNING SPINDLE Spindle head DIN 55026 form A: size 8 Spindle diameter in front bearing: mm 160 Spindle bore: mm 77 MAIN DRIVE Built-in motor Drive power 100% (40%) duty cycle: kW 29 (33) Max. spindle speed: min⁻¹ 4000 Max. spindle torque 100% (40%) duty cycle: Nm 550 (630) Dodpfx Aom H Tutjfljkg TAILSTOCK MECHATRONICS Adjustment via NC servo drive (Z) Rapid traverse speed: m/min 10 Max. contact force: daN 1200 Tailstock with integrated center: Morse taper 5 TOOL CARRIER (single tool turret, turning-drilling-milling unit) AC drive Drive power 100% (40%) duty cycle: kW 15 (20) Max. speed: min⁻¹ 9000 Max. torque at the spindle 100% (40%) duty cycle: Nm 125 (165) Max. swivel moment of the B-axis: Nm 900 Travel perpendicular to X/Z plane (Y-axis): mm 250 [-100/+150] Swivel angle of the milling spindle (B-axis): ° +/-110

Stanje: rabljeno, številka stroja/vozila: 006500, Pozicija 1: Vertikalno skladišče PRIESS-BMA DLS-CNC Pozicija 2: CNC vrtalni stroj PRIESS-BMA DLS-CNC Pozicija 3: CNC vrtalni in mozničevalni stroj PRIESS-BMA DLS-CNC Pozicija 4: CNC vrtalni in mozničevalni stroj PRIESS-BMA DLS-CNC Dedpjwucmvefx Aflskg Pozicija 5: Krtačni stroj PRIESS-BMA DLS-CNC Pozicija 6: Transferni sistem PRIESS-BMA DLS-CNC