Stojala Za Palete nakup rabljenega (115.412)

Stanje: rabljeno, Od 113,30 € zdaj za 45,32 €. Zdaj s 60% popustom. Rabljeni regal za zlaganje, primeren za uporabo kot premični skladiščni regal. Hnjdpfx Ahsrfa R Ro Dsu Na voljo v različnih izvedbah, predvsem pa prilagodljiv po višini. Regal je zasnovan za vse standardne velikosti palet, zajetno ali težje paletirno blago. Višino lahko prilagodite

Stanje: dober (rabljeno), It is equipped with an upper pressure roller to compensate for staples. It can be combined with a pallet brush. Continuously adjustable test pressure. Hnsdpfx Ahod R Eqps Dou Standard tests: Base boards and base boards, longitudinally and transversely mounted deck boards. Indirect wedge testing. Optional tests: Dimensional inspection, fork arm or clearance monitoring, separate base plate testing for loaded pallets, direct wedge testing. Please contact us via the contact form or call us if you need further information.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, DYNAMIC GRAVITY FLOW RACKING SYSTEM 360 pallet positions – Gravity roller system, model STP – Capacity: 12 pallets per lane System consisting of 30 dynamic roller lanes with S3 Fifa System technology, configured with 3-rail entry and 2-rail exit for depositing and retrieving unit loads using a forklift without side-shifting. Each lane enables deep storage of 12 europallets (dimensions 800 x 1200 x 1500 mm H), forked from the 800 mm side, with a minimum weight of 200 kg and a maximum weight of 1200 kg. The total system length is 14,900 mm. Technical features of the rollers: - Rollers made of galvanized steel, length 850 mm, diameter 60 mm, pitch 104 mm - 2 entry guides to facilitate loading - 11 direct-acting brake rollers for pallet speed control Hodpfx Ahexltb As Djnu - 1 pallet stop device - 1 pallet separator unit for easier retrieval Complete with fixing brackets and assorted fasteners.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Nov Magazin za palete / Dispenzer palet Specifikacije: Nastavljiv dispenzer palet za EURO ali druge tipe palet Maksimalna kapaciteta: do 15 palet Hodpfx Asi Hnz Toh Denu Tip palete: širina od 750 do 1200 mm Možna montaža na transportni trak za palete. Glavna napetost: 240V 50Hz Kompresor zraka: 100L-200L Delovni tlak zraka: 6-8 bar Krmiljenje: Delta PLC/HMI Na zalogi: 10 kosov. PROTON EE-ELEKTRONIKA d.o.o

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Nedrseče palete za težke obremenitve. Hnodpexk Typofx Ah Dju

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, Complete wood processing line for pallet production, including stacker, cross-cut saw, chipper, edger, and dedusting system. Year of manufacture: 2021 Technical data: - Maximum log diameter: 480 mm - Minimum log diameter: 120 mm - Minimum log length: 1,500 mm - Maximum log length: 3,000 mm CAPACITY: up to 200 m³ per shift THE PROCESSING LINE CONSISTS OF THE FOLLOWING EQUIPMENT: 1. BRODPOL WOOD PROCESSING LINE, which includes: - Log infeed conveyor - Longitudinal carriage conveyor - Circular sawmill – Motors: 110 kW and 90 kW - Outfeed roller table with waste slab and side board ejection system - Driven roller table - SB 4000 reference table - WP 210 twin-shaft multi-rip saw – Motors: 110 kW and 75 kW - Outfeed table with board ejection and conveyor to stacker - Lower return conveyor for waste slabs, side conveyor to edger, and belt conveyor to chipper - Sawdust sieve 2. LIGNUMA OFZ 300 EDGER AND TRIMMER Year of manufacture: 2023 The machine consists of the following components: - Centering table - MN 315 trimmer - SC-2 separator table - OFD 500/K edger 3. JABŁOŃSKI SD-250 E BOARD STACKER WITH CROSS-CUT SAW Hedpfxjv Dm T To Ah Djnu The unit consists of the following components: - Buffer belt conveyor - Goose neck infeed conveyor - Cross-cut saw - Buffer - Stacking unit - Driven outfeed roller conveyor - Straight driven roller conveyor - Pallet lift 4. TEKNAMOTOR SKORPION 650 EB/2 CHIPPER with infeed and outfeed conveyors. 5. COMPLETE DUST EXTRACTION SYSTEM FOR ALL EQUIPMENT.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Regálový sprievodca na palety, Feralco, max. 1 200 kg/paleta, max. 640 paletových miest pre europalety a americké palety – použité: Cena zo skladu: 59 500 € (bez DPH), plus demontáž atď.! Výrobca: Feralco Typ: Dynamický / Paletový priebežný regál Rok výroby: 2019 Kapacita: približne 640 paletových miest Priestor potrebný pre zariadenie: Šírka: cca 14,22 m (šírka poľa 2,70 m) hĺbka: cca 20 m Výška rámu: cca 10,65 m Výška pri danej konfigurácii s výškou palety 2,30 m: max. 11,62 m Skladovanie: 16 paliet do hĺbky 5 polí, každé s 2 kanálmi a 4 úrovňami = 640 paletových miest Hnjdpjxdx Dyjfx Ah Dou Vhodné pre europalety a americké palety Šírka palety: 800 a 1 100 mm, s tovarom max. 1 200 mm Hĺbka palety: 1,20 m Max. výška palety: 2,30 m Max. hmotnosť palety: 1 200 kg Sklon: 4,5 % Zaťaženie/kanálová úroveň: 20 000 kg Max. zaťaženie na kanál: 80 000 kg Stav: veľmi dobrý Dostupné: ihneď, je potrebná ešte demontáž Lokalita: región Rýn-Mohan

Stanje: dober (rabljeno), Heavy-duty pallet conveyor roller track, pallet tilting roller conveyor. Pneumatic lifting feet are installed beneath the chain conveyor segment; its maximum lifting height is 55 mm. The elevated roller row transfers the pallets at a 90° angle. Hnjdpfx Ajvxtg Noh Dsu Track dimensions: Width: 3,500 mm Length: 1,900 mm Roller width: 920 mm Roller diameter: 90 mm Pitch: 200 mm Roller drive /3 motors/: SEW-Eurodrive R40 DT71048MG Power: 0.37 kW Motor speed: 1,380 rpm Output speed: 64 rpm Chain drive /1 motor/: SEW-Eurodrive SA47T DT80N4MM11 Power: 1.1 kW Motor speed: 2,900 rpm Output speed: 61 rpm

Stanje: novo, Length 3000 mm Width 1050 mm Height 2500 mm Load capacity per pallet position: t Number of pallet positions: 9 Machine weight approx.: t Space requirement approx.: 3.0 x 1.05 x 2.5 m 2x plug-in heavy-duty racks for Euro pallets Price is per unit! Hnodpfst Eaaxsx Ah Dju Can also be sold individually.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Podatki: - Dolžina: 270 cm - Višina: 10 cm - Širina: 5 cm - Regalni sistem: Dexion - Tip: P90 Hodpfxsxnxavo Ah Denu - vključno z varnostnimi zatiči - Rabljeno blago iz zaloge – dobro stanje. - Takoj dobavljivo! -- TRENUTNO NA VOLJO VEČ KOSOV -- Cena: 23,00 € neto 27,37 € bruto Prejmete račun z izkazanim DDV. Prevoz: Dostavo na željo zagotovi naš partnerski prevoznik, stroški so odvisni od poštne številke. Montaža: Naše usposobljeno osebje vam po potrebi strokovno pomaga pri montaži in demontaži vaše poslovne opreme. Naše priporočilo: Sporočite nam vaše potrebe... Z veseljem vam pomagamo pri realizaciji vaših projektov – od načrtovanja, naročila do montaže.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Prodajam kovinske stojala za steklo v zelo dobrem stanju. Skupaj imam 463 kose, vsi prikazani na fotografijah z merami. Cena v oglasu je navedena za kos – možnost dogovora. Za stojala imam tudi rezervna kolesca, približno 100 vrtljivih in 100 fiksnih, cena za kolesca po dogovoru. Prodajam tudi kovinska stojala za papirne ali folijske role, enaka – prav tako prikazana na fotografijah – imam 63 kose. Podrobnosti pošljem po elektronski pošti ali po telefonu na številko 606850045. Hnodoxiwa Djpfx Ah Deu

Stanje: novo, Leto izdelave: 2025, Production time approx. +/- 4 months. The ideal machine, for example, for shredding pallets and wood waste. * prepared for extraction, see pictures 4 and 5 without additional accessories such as -exhibited hopper or -conveyor belt cutout Commodity code: 84659600 Main motor: 55 kW; 400 V - 50 Hz - 3 phase incl. turbo coupling, Hydraulic motor: 2.2 kW, 400 V - 50 Hz - 3 phase Knives: 76 pieces, reversible multiple times Knife size: 35 x 35 x 20 mm Rotor diameter: 360 mm Control system: Siemens S7-1200 PLC Hopper opening approx. 1530 x 1235 mm Hopper volume approx. 2.5 cbm Hydraulically operated pusher Screen perforation: 10 - 30 mm Extraction nozzle Ø 200 mm Weight approx. 4,500 kg Dimensions (LxWxH) approx. 2765 x 2520 x 1730 mm Turbo coupling Standard equipment includes: - V-rotor for maximum throughput - 2nd row of knives on rotor - Control cabinet with Siemens PLC control system - Automatic star/delta start - Fast hydraulic system - Automatic shutdown when rotor is idling - Rotation speed 70-90 rpm for high throughput - Cycle control to avoid idle time - Performance-enhancing step control for hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration dampening machine feet - CE compliant The shredder is designed for shredding natural wood, chipboard and MDF, other materials upon testing and approval by the manufacturer. Hnsdpfx Ahed Hkqho Dsu Requirements for raw material: - Moisture content (atro) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Stanje: dober (rabljeno), Paletno regal, regal za težke tovore, visoko regal, sestavljiv regal, regalni stojalniki za skladišče -Proizvajalec: SSI Schäfer, paletni sestavljiv regal 6 polj / dolžina regala 17.100 mm -Širina polja: 2.700 mm -Višina regala: cca 3.500 mm -Stojala: 7 kosov 3.600/1.105/180 mm Hnsdpfx Ahsw R Raho Dju -Prečne vezi: 30 kosov 2.770/65/250 mm -Izročitev/cena: komplet -Transportne dimenzije: 3.620/1.150/V1.050 mm -Skupna teža: 726 kg

Stanje: dober (rabljeno), Technical data for the base plate: Racking system: SSI Schäfer Type: PR600 Scope of delivery includes: 01x Base plate, new Type: FT 211 for 120 mm frame profile Material color: RAL 5010 Gentian blue Material thickness: approx. 6 mm Total width: 195 mm Total depth: 105 mm Hedpfjw Dnggox Ah Donu Number of boreholes: 2 pcs Borehole diameter: 13 mm Weight: approx. 1.04 kg | ea. Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any transport or shipment of this item beyond collection is subject to additional costs, which can be requested from us separately depending on the place of delivery and scope of delivery.

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, nosilnost: 1.000 kg, skupna dolžina: 1.240 mm, skupna širina: 835 mm, Hello, I am offering for sale new half-size wire mesh containers (1/2): - Dimensions: 1240 x 835 x 500 mm - Container weight: approx. 55 kg - Load capacity: 1000 kg - The containers are brand new - Net price: PLN 99.00/unit Hedpeupudmsfx Ah Djnu - Sale exclusively with a VAT invoice

Stanje: novo, Galvanized Pallet Racks for Outdoor Use Specifications: - Height: approx. 450 cm - Depth: approx. 110 cm - Length: approx. 11.20 meters - Load Capacity: 3,000 kg per compartment - Uprights galvanized - Beams 270 x 14 x 5 cm, type T30 - Beams galvanized - New BLT / PR45 FVZ - Manufactured in Europe & tested in accordance with current DIN EN 15512 standards. - 100% quality at the best price. Rack configuration: - 05 x Uprights approx. 450 cm x 110 cm, pre-assembled - 16 x Beams approx. 270 x 14 x 5 cm, T30 - 32 x Safety pins - 32 x Safety bolts M8 x 20 incl. nut - Levels: ground + 2 - 36 pallet spaces incl. ground level -- IMMEDIATELY AVAILABLE IN MULTIPLE QUANTITIES -- Price: €2,450 net plus statutory VAT. You will receive an invoice showing the VAT separately. Transport: Delivery can be arranged through our partner forwarding agent on request, with costs depending on the postal code. Assembly: Hnodpfx Ahjxnwg Uo Dsu Our trained personnel are happy to professionally assemble or disassemble your warehouse equipment as needed. Our recommendation: Let us know your requirements... We are happy to support you in realizing your projects, from planning to ordering to installation. Customer note: When fitting the safety pins/bolts, holes that may be clogged due to galvanizing might need to be redrilled. Unfortunately, this cannot always be avoided with high-quality galvanizing. If you have any questions, please do not hesitate to contact us.

Leto izdelave: 2025, Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S25Synthesi01, Stretch Wrapper Synthesi TECHNICAL DETAILS Turntable / Base frame / Ø 2,200 mm Max. pallet dimensions: 1,550 x 1,550 mm Max. load capacity: 2,000 kg Wrapping height (including pallet): 2,200 mm FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH" Pre-stretch ratio set to 200% Film application tension electronically adjustable in the programs in various steps Turntable height: 75 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start - start/stop) Frequency-controlled carriage speed upward/downward Acoustic signal at start of wrapping and end of cycle Emergency stop button according to CE regulations Turntable always stops in the same home position Fall protection for film carriage Push button for machine power on as well as start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS VIA CONTROL PANEL All function parameters adjustable via display F00 – Display lock for program editing F02 – Infinitely variable turntable speed 5–12 rpm Carriage speed upward and downward independently adjustable F03 – Carriage speed upward from 1.3 to 5.4 m/min F04 – Carriage speed downward from 1.3 to 5.4 m/min F05 – Number of wraps at pallet foot (1–10 wraps) F06 – Number of wraps at pallet top (1–10 wraps) F09 – Delay for photocell wrapping height F13–F16 – Film application tension at foot & top wraps / ascent & descent independently adjustable F62 – Ergonomic height for film change Display of film consumption (optional) ADJUSTABLE WRAPPING PROGRAMS VIA CONTROL PANEL 6 storable wrapping programs F01-1 – Cross wrap (up/down) F01-2 – Simple wrap (only up or only down) F01-3 – Push button for manual functions F10–F11 – Wrapping cycle with defined start and stop heights F12 – Wrapping to a predefined height (deactivating the photoelectric height sensor) F22/F23 – Wrapping cycle for top sheet application F29 – Soft start cycle for application of edge protection F30–F31 – Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Wrapping cycle with manual or motorized roping (optional) Reinforcement cycle via push button Optional features: Turntable size up to Ø2,600 mm Mast height up to 3,900 mm Ramp Hodpfxov Npx Nj Ah Denu Installation frame Photoelectric sensor for dark products Film cutting device etc. Additional machines available from stock in Ludwigsburg. Pictures may include optional equipment subject to surcharge. Images similar to actual product.

Stanje: zelo dobro (rabljeno), Ostesaltningsreoler (saltreoler), Hnsdpfxoitk Dio Ah Dsu Rustfrit stål AISI 316, med automatisk lukkende sider. Mål: 1880 x 350 x 2100 mm

Stanje: dober (rabljeno), Included in the scope of delivery: 01x U-shaped collision protection corner, used Material color: orange Total height: approx. 400 mm Total width: approx. 220 mm Total depth: approx. 250 mm Number of boreholes: 03 pcs Borehole Ø: approx. 15 mm Material thickness: 6 mm Weight | per unit: 10.87 kg Note: Hodpjw Dy Ivjfx Ah Dsnu L-brackets are welded on the sides. Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for collection. Should transportation or shipping be required, this will incur additional costs, which can be provided upon request and will vary depending on the delivery location and scope of supply.

Stanje: novo, PALLET RACKING, GALVANIZED FOR OUTDOOR USE Pallet racking hot-dip galvanized for outdoor installation Specifications: - Height: approx. 450 cm - Depth: approx. 110 cm - Length: approx. 16.80 linear metres - Load capacity: 3000 kg per bay - Uprights hot-dip galvanized - Beams: 270 x 14 x 5 cm, T30 - Beams hot-dip galvanized - New BLT / PR45 HDG - Manufactured in Europe & tested in accordance with current DIN EN 15512 standard - 100% quality at the best price Rack includes: - 7 uprights, approx. 450 cm x 110 cm, pre-assembled - 24 beams, approx. 270 x 14 x 5 cm, T30 - 48 locking pins - 48 locking bolts M8 x 20 incl. nut - Levels: ground + 2 Hodpsxnwdtjfx Ah Donu - 54 pallet spaces including floor positions -- IMMEDIATELY AVAILABLE IN MULTIPLE QUANTITIES -- Price: €3,550 net plus legally applicable VAT You will receive an invoice with VAT shown separately. Transport: Delivery is available by arrangement via our partner forwarding company; costs depend on the postal code. Assembly: Our trained staff is available to assist with professional assembly and disassembly of your equipment as needed. Our recommendation: Let us know your requirements... We are happy to assist you— from planning to ordering through installation. Customer information: When installing the locking pins/bolts, it may be necessary to re-drill holes that have been clogged due to the hot-dip galvanizing process. Unfortunately, even with high-quality hot-dip galvanizing, this cannot be completely avoided. If you have any questions, please feel free to contact us.

Leto izdelave: 2025, Stanje: kot nova (razstavni stroj), številka stroja/vozila: S25Synthesi01, Stretch Wrapper Synthesi TECHNICAL DETAILS Turntable / Base Frame / Ø 1,500 mm Max. pallet size: 800 x 1,200 mm Max. load capacity: 2,000 kg Wrapping height (including pallet): 2,200 mm Turntable height: 75 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start - start/stop) Frequency-controlled carriage speed up/down Signal tone at wrapping start and at end of cycle Emergency stop switch according to CE standards Turntable always stops at the same home position Fall protection for the film carriage Push buttons for machine power-on, as well as start & stop function & reset according to CE standards, Ø 22 mm ADJUSTABLE PARAMETERS ON CONTROL PANEL All function parameters adjustable via display F00 – Display lock for program changes F02 – Steplessly adjustable turntable speed 5–12 rpm Carriage speeds for upward and downward movement can be set independently F03 – Upward carriage speed from 1.3 to 5.4 m/min F04 – Downward carriage speed from 1.3 to 5.4 m/min F05 – Number of wraps at pallet base (1–10 wraps) F06 – Number of wraps at pallet top (1–10 wraps) F09 – Delay time for photo cell wrap height F13–F16 – Film tension for base & top wraps / ascent & descent can be set independently F62 – Ergonomic height for film replacement Display of film consumption (optional) ADJUSTABLE WRAPPING PROGRAMS ON CONTROL PANEL 6 storable wrapping programs F01-1 – Cross wrapping (up/down) F01-2 – Simple wrapping (only up or down) F01-3 – Push button for manual functions F10–F11 – Wrapping cycle with defined start and stop height F12 – Wrapping to a preset height (disables height photo sensor) F22/F23 – Wrapping cycle for cover sheet film F29 – Soft-start cycle for application of edge protection F30–F31 – Wrapping cycle with reinforcement and adjustable number of wraps Soft start to minimize film tearing on sharp pallet edges Wrapping cycle with manual or motorized rope forming (optional) Reinforcement cycle via push button FILM CARRIAGE TYPE “OPRS” Motor-driven pre-stretch system 200%. Optionally with easily interchangeable gear set for 150%–200%–250% stretch Film specifications: Max. outer diameter Ø 250 mm – core Ø 76 mm – height = 500 mm Standard connection values: 230 V – 1L+N+PE – 50 Hz Hnsdpev Iqyrjfx Ah Deu Total power: 1.2 kW / 6A Optional: FILM CARRIAGE TYPE “OPRS – ONE PRE STRETCH” Pre-stretch set to 200% Turntable size up to Ø 2,600 mm Mast height up to 3,900 mm Ramp Mounting frame Photoelectric sensor for dark products Cutting device etc. Additional systems available from stock in Ludwigsburg. Images may show chargeable options.

Stanje: novo, Galvanised Pallet Racking for Outdoor Use Specifications: - Height: approx. 450 cm - Depth: approx. 110 cm - Length: approx. 100.16 linear metres Hsdpfxexnwdme Ah Denu - Load capacity: 3,000 kg per bay - Uprights hot-dip galvanised - Beams 270 x 14 x 5 cm, T30 - Beams hot-dip galvanised - Brand new BLT / PR45 HDG - Manufactured in Europe & tested to the current DIN EN 15512 standard. - 100% quality at the best price. Racking set consists of: - 37 x uprights, approx. 450 cm x 110 cm, pre-assembled. - 144 x beams, approx. 270 x 14 x 5 cm, T30. - 288 x safety pins. - 288 x safety bolts M8 x 20 incl. nuts. - Levels: floor + 2 - 324 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE IN MULTIPLE QUANTITIES -- Price: €19,900 net Plus legally applicable VAT. You will receive an invoice showing the VAT separately. Transport: Delivery is carried out upon request by our partner forwarding agent; costs depend on postcode. Assembly: Our trained personnel are at your disposal for professional assembly and disassembly of your warehouse equipment if required. Our recommendation: Let us know your requirements... We are happy to support you in the realisation of your projects, from planning to ordering and installation. Customer note: When installing the safety pins/bolts, holes that have become blocked due to galvanisation may need to be redrilled. This unfortunately cannot be completely ruled out with high-quality hot-dip galvanising. If you have any questions, please feel free to contact us.

Leto izdelave: 2025, Stanje: kot nova (razstavni stroj), številka stroja/vozila: S23Synthesi01,

Stanje: novo, Hot-dip Galvanized Pallet Racks for Outdoor Use Specifications: - Height: approx. 450 cm - Depth: approx. 110 cm - Length: approx. 19.60 running meters - Load capacity: 3,000 kg per bay - Uprights: hot-dip galvanized - Beams: 270 x 14 x 5 cm, T30 - Beams: hot-dip galvanized - New BLT / PR45 FVZ product - Manufactured in Europe & tested according to current DIN EN 15512 standard. - 100% quality at the best price. Rack includes: - 08 x Uprights, approx. 450 cm x 110 cm, pre-assembled - 28 x Beams, approx. 270 x 14 x 5 cm, T30 - 56 x Safety pins - 56 x Safety bolts M8 x 20 incl. nuts - Levels: Ground + 2 - 63 pallet spaces including ground level. -- IMMEDIATELY AVAILABLE IN MULTIPLE QUANTITIES -- Price: €4,100 net plus applicable VAT You will receive an invoice with VAT shown separately. Transport: Hsdpfxjxnwdgj Ah Denu Delivery is available upon request via our partnered freight forwarder. Costs depend on the destination postal code. Installation: Our trained staff are available, upon request, to professionally install and dismantle your warehouse equipment. Our recommendation: Let us know your requirements... We are happy to support you with your projects, from planning and ordering to installation. Customer note: During installation, holes clogged by the hot-dip galvanization may need to be re-drilled for safety pins/bolts. Unfortunately, this cannot be completely avoided with high-quality hot-dip galvanization. If you have any questions, please let us know.

Stanje: novo, Hot-dip Galvanized Pallet Racking for Outdoor Use Specifications: - Height: approx. 450 cm Hnodpfxjxnwdao Ah Deu - Depth: approx. 110 cm - Length: approx. 14 linear meters - Load capacity: 3,000 kg per bay - Frames hot-dip galvanized - Beams: 270 x 14 x 5 cm, T30 - Beams hot-dip galvanized - Brand new BLT / PR45 HDG - Manufactured in Europe & tested according to the latest DIN EN 15512 standard. - 100% quality at the best price. Rack consists of: - 6 x frames approx. 450 cm x 110 cm, pre-assembled - 20 x beams approx. 270 x 14 x 5 cm, T30 - 40 x locking pins - 40 x safety bolts M8 x 20 incl. nuts - Levels: floor + 2 - 45 pallet spaces including floor locations -- AVAILABLE IMMEDIATELY IN MULTIPLE QUANTITIES -- Price: €2,990.00 net plus statutory VAT. You will receive an invoice with VAT shown separately. Transport: Delivery is available upon request via our partner forwarding company, costs depend on postal code. Installation: Our trained staff can professionally assemble and disassemble your warehouse systems upon request. Our Recommendation: Let us know your requirements... We are happy to assist you with your projects, from planning and ordering to installation. Customer Notice: When installing the locking pins/safety bolts, holes that may be blocked by the hot-dip galvanizing may need to be re-drilled. Unfortunately, this cannot be entirely avoided with high-quality hot-dip galvanizing. If you have any questions, please do not hesitate to contact us.