Stojnice Na nakup rabljenega (26.632)

Stanje: dober (rabljeno), For sale: CRATHERN, PERONDI IA630, NA 900. Cgsdpoud Axgefx Ahxot

Stanje: zelo dobro (rabljeno), Catalogue number 7275 TECHNICAL DATA - Maximum planing width: 610 mm - Maximum planing height: 200 mm From above: - Feed roller, toothed - Anti-kickback fingers - 2 pressure rollers - Feed roller, toothed - Pressure roller - 610 mm planing head, 4-knife, 7.5 kW - Pressure rollers - Feed roller, smooth From below: - Guide bar - Adjustable infeed table with split smooth sliding roller - 610 mm planing head, 4-knife, 5.5 kW - 2 smooth, powered feed rollers - Side pressure From the rear: - Side spindles + 2 pressure rollers: 1) Right vertical spindle, 5.5 kW 2) Left vertical spindle, 5 kW - Maximum planing height on side spindles: 200 mm Cgodsytdkxspfx Ahxst - Spindle diameter: 35 mm - Spindles adjustable up/down, left/right 3) Additional horizontal spindle 160 mm, adjustable up/down + left/right + angle, approx. 4 kW - Possibility to plane with additional spindle from above/below/side - Spindle diameter: 35 mm - Adjustable rollers in lower table - 2 feed speeds - Feed motor: 2.2 kW - Extraction nozzle diameter: 120 mm - Dimensions (L/W/H): 2550 x 1700 x 1350 mm - Weight: approx. 3000 kg ADVANTAGES - Wide planer for wet and dry timber - Ideal for processing beams, flooring, etc. - 2 horizontal planing heads + 2 vertical spindles + 1 horizontal spindle - Cutterheads included - German-made, brand KUPFERMUHLE - Used planer in very good condition Original photos Net price: 58,900 PLN Net price: 14,020 EUR (depending on 4.2 EUR rate) (Prices may vary depending on exchange rate fluctuations)

Stanje: zelo dobro (rabljeno), CATALOG NUMBER 7503 Codpfxeyz Sfbe Ahxsgt TECHNICAL DATA: - Max planing width: 610 mm - Max planing height (double-sided): 200 mm - Max planing height (four-sided): 100 mm Top section: - 2 rubber feed rollers - 2 toothed feed rollers - 1 metal feed roller - Toothed infeed roller - Pawls - Pressure element - 2 toothed feed shafts - Pressure element - 610 mm, 4-knife planing shaft, 7.5 kW - Pressure element - Smooth metal feed roller - Pressure element - Profiling spindle, 7.5 kW - Pressure element - Rubber feed roller Bottom section: - Planing shaft, 35 mm diameter, shaft length 130 mm, 2.2 kW - 2 guide rails - Infeed table - Smooth feed shaft - 610 mm, 4-knife planing shaft (currently 2 knives installed), 7.5 kW - 2 smooth feed shafts - Split metal sliding roller - Side pressure element Rear section: - Side spindles + 2 pressure elements 1) Right vertical spindle 95 mm, 4 kW 2) Left vertical spindle 95 mm, 4 kW - Spindle diameter: 35 mm - Spindles adjustable up/down and left/right - Adjustable rollers in lower table - Electric thickness adjustment - 6 feed speeds: 7/9/11.5/14/18/23 m/min - Feed motor: 3.1 kW - Extraction connection diameters: 3×120 mm, 3×160 mm - Dimensions (L/W/H): 3150 x 1900 x 1600 mm - Weight: approx. 3500 kg ADVANTAGES: - The best wide planer for both wet and dry wood - Perfect for processing beams, floorboards, etc. - Additional profiling shaft and pre-cutter - 4 horizontal planing shafts + 2 vertical spindles - Manufactured by the German brand KUPFERMUHLE - Used planer, condition: very good Net price: 66,900 PLN Net price: 15,930 EUR (depending on exchange rate 4.2 EUR) (Prices may vary with significant currency fluctuations)

Stanje: zelo dobro (rabljeno), Catalogue number: 7640 FEATURES – The best wide planer for both wet and dry wood – Ideal for processing logs, flooring boards, etc. – 2 planing shafts + 3 spindles – Manufactured by German brand KUPFERMUHLE – Used planer in very good condition TECHNICAL DATA - Max planing width: 610 mm - Max planing height: 200 mm - Top section: Cedpfx Ahsyaq Taexsgt - Geared infeed roller - Kickback fingers - Pressure beam - 2 geared feed rollers - Pressure beam - Planing shaft: 610 mm, 6 knives, 15 kW - Pressure beams - Outfeed smooth feed roller - Bottom section: - Side pressure at infeed - Guide rail - Infeed table - Geared feed roller - Planing shaft: 610 mm, 6 knives, 7.5 kW - 2 smooth feed rollers - Side pressure at outfeed - Rear section: - 2 side spindles + pressure systems: 1) Right vertical spindle 200 mm, 15 kW 2) Left vertical spindle 200 mm, 15 kW (electronically adjustable left/right) - Spindle diameter: 40 mm - Spindles adjustable alternately - Spindles adjustable up/down, left/right 3) Additional lower horizontal spindle 160 mm, adjustable up/down + left/right, 5.5 kW - Spindle diameter: 35 mm - Outfeed: 2 upper metal idler rollers, 2 lower rubber-driven rollers - Adjustable rollers in lower table - Electric adjustment of planing height - 6 feed speeds: 12.8 / 16.3 / 20 / 25.6 / 32.6 / 40 m/min - Feed motor: 8 kW - Extraction port diameters: 2×120 mm, 2×160 mm - Dimensions (LxWxH): 2980 x 1980 x 1800 mm - Weight: approx. 3500 kg Net price: 66,900 PLN Net price: 15,920 EUR (subject to 4.2 EUR rate) (Prices may change with significant exchange rate fluctuations)

Stanje: rabljeno, Offer consisting of: Creasing machine Codpfx Ahsu Srw Rjxsgt Upon request, we can arrange the following for you: Packaging, loading, transport (by ship or airplane), including customs clearance.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, obratovalne ure: 400 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2003031, vrsta vhodnega toka: Klimatska naprava, skupna dolžina: 1.670 mm, skupna višina: 1.550 mm, skupna širina: 1.070 mm, vhodna napetost: 220 V, skupna masa: 450 kg, širina folije: 370 mm, Stroj za pakiranje s prekrivno folijo (pillow pack) – Model KFD323 (2020) Cgjdpfx Ahey Edgloxst Visokokakovosten stroj za pakiranje s prekrivno folijo v dobrem stanju, popolnoma delujoč in pripravljen za takojšnjo uporabo v proizvodnji. Ključne specifikacije: Model: KFD323 Leto izdelave: 2020 Napajanje: 220 VAC Hitrost pakiranja: 15–30 vrečk na minuto (odvisno od izdelka in folije) Razpon širine folije: 80–370 mm Lastnosti in prednosti: Primeren za širok nabor izdelkov, vključno s prehrambnimi izdelki, pekovskimi izdelki in splošnim blagom Zanesljivo in enakomerno tesnjenje Nastavljive nastavitve hitrosti in širine folije za različne potrebe pakiranja Kompaktna in učinkovita zasnova za enostavno vključitev v obstoječe proizvodne linije Stroj je bil redno vzdrževan in je idealen za podjetja, ki iščejo stroškovno učinkovito rešitev pakiranja brez kompromisov pri zmogljivosti. 📩 Video posnetki, dodatne fotografije in ogled stroja so na voljo na zahtevo.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2020, obratovalne ure: 1.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 01254653, Linija za proizvodnjo lesenih delov za leseno-jeklene varovalne ograje TERTU. - utorni stroj T18 - utorni stroj za stebre - čelilna žaga - finalizacijski stroj (krajšanje, vrtanje) - podajalne mize - vrtalna miza - 4x rezervna glava - komplet rezervnih nožev in svedrov Preprosti, zelo kakovostni in masivni stroji. Cjdpfou A Hv Njx Ahxjgt Popolnoma kompletni, pripravljeni za obratovanje.

Stanje: zelo dobro (rabljeno), Profesionalni diskasti rezkar Ø100 mm x 6 mm z izmenljivimi rezilnimi ploščicami, nameščen na držalu SK40 – Izdelano v Nemčiji. Idealno za hitro in natančno utorno rezkanje, rezanje ter bočno obdelavo jekla, litega železa, aluminija in drugih konstrukcijskih materialov. Rezkar je opremljen z večrezilnimi ploščicami – zagotavlja visoko učinkovitost rezkanja in dolgo življenjsko dobo orodja. Celota v dobrem delovnem stanju, pripravljena za takojšnje delo v CNC centru. • Premer rezkarja: Ø100 mm • Širina reza: 6 mm • Izmenljive rezalne ploščice • Priprava: konus SK40 • Stanje: rabljeno – 100% delujoče • Proizvodnja: Izdelano v Nemčiji Cgedpfxjxllclj Ahxot

Stanje: rabljeno, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, Popolna odsesovalna naprava za proizvodno linijo za razrez hlodovine LSH 350/4500. V obratovanju od 01/2023. Naprava nima proizvajalca, sestavljena je iz posameznih komponent. Nameščena na podlagi izračuna, dokumentacija na voljo. Csdpjxa Excofx Ahxsgt

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, nosilnost: 350 kg, skupna višina: 820 mm, skupna širina: 1.185 mm, skupna dolžina: 2.345 mm, skupna masa: 68 kg, Pozdravljeni Prodajam palete za osebne pnevmatike - Zelo dobro stanje - Dimenzije: 2345x1185x820 mm - Teža: 68 kg - Nosilnost: 350 kg - Na voljo: 850 kosov - Cena: 119 EUR/neto/kos. Cgodpfxovx Dx Ao Ahxet

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 8 kW (10,88 KM), vrsta prenosa: samodejen, lastna masa: 1.800 kg, največja dovoljena obremenitev: 2.000 kg, stanje verige: 100 odstotek, Leto izdelave: 2025, obratovalne ure: 1 h, številka stroja/vozila: 20251219, Gosenični žerjav je nov in neuporabljen! Cgedpfsy Em Hzjx Ahxjt TEHNIČNI PODATKI Maksimalna nosilnost: 2.000 kg Dvižna zmogljivost: 2.000 kg/m PODROBNOSTI O STROJU Proizvajalec motorja: Honda Moč: 8 kW Tip menjalnika: Avtomatski Vrsta goriva: Bencin Lastna teža: 1.800 kg Delovne ure: 1 h Stanje gosenic: 100 % OPREMA Vlečna kljuka Gumijaste gosenice Kompaktna zasnova za maksimalno prilagodljivost

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, dolžina rezanja (maks.): 760 mm, Obseg rezanja okroglega jekla pri 90°: 400 mm, dolžina tračnega lista: 5.920 mm, delovna višina: 720 mm, Brez minimalne cene – zagotovljena prodaja najvišjemu ponudniku! TEHNIČNE PODROBNOSTI Dimenzija žaginega traku: 5.920 x 41 x 1,3 mm Hitrost rezanja: brezstopenjsko nastavljiva (1:7) Delovno območje (okroglo): maks. 400 mm Delovno območje (kvadrat): 400 x 370 mm Dolžina reza (enojni hod): 10 - 760 mm Dolžina reza (večkratni hod): maks. 9.999,9 mm Delovna višina: 720 mm Sila vpenjanja: 3.600 N Min. dolžina dobrega kosa: 10 mm (35 mm vertikalno) Cgsdey Ex E Nspfx Ahxst Opomba: Razstavljanje in nakladanje lahko prodajalec ponudi za doplačilo. Valjčna proga ni vključena v ponudbo.

Stanje: rabljeno, Toplozračni generator K25 na drva Cgsdey Ncarjpfx Ahxot Kal./h 250.000

Stanje: rabljeno, Leto izdelave: 2017, obratovalne ure: 30.000 h, številka stroja/vozila: LC566, Used CFT can filling line for soft drinks – 12,000 cans per hour Introduction and production capacity The used CFT can filling line for soft drinks – 12,000 cans per hour offers a complete solution for filling carbonated beverages into aluminum cans. CFT manufactured this line in 2017 and designed it for two slim formats commonly used in the soft drinks industry. Specifically, the system handles up to 12,000 cans per hour, thus meeting the production needs of medium-sized businesses. From 30.06.2025, the owner will make the line available for sale. Therefore, this offer represents a valuable opportunity for companies looking to expand their production capacity. Depalletizing and initial inspection First, the CFT depalletizer automatically separates the empty cans and introduces them into the production flow. Next, a HEUFT inspection unit checks each can for visible defects and dimensional deviations. As a result, the system ensures that only clean, undamaged cans proceed to rinsing. Furthermore, this early inspection step reduces the risk of plant downtime further along the process. Cgjdpfxey I R Eao Ahxst Can transport and rinsing Afterwards, CFT cable conveyors transport the accepted cans to a twin-channel rinser. The CFT rinser cleans the inside of each can using pressurized water jets or a sterile air blast. Consequently, the machine meets hygiene requirements as per food and beverage regulations. In addition, the twin-channel design enhances throughput and reduces contamination risks. Notably, this section plays a key role in maintaining microbiological safety. Filling Following rinsing, a CFT monoblock performs the filling and seaming operations with 12 filling valves and 4 seaming heads. The machine efficiently processes cans of 150 ml and 330 ml. It also precisely controls pressure and temperature to prevent CO₂ loss during the filling of carbonated soft drinks. Moreover, this phase supports both performance and product integrity, thus ensuring consistent quality at high speeds. Inspection of filled cans and rejection After filling, another HEUFT unit inspects the filled cans to check fill level, seam integrity, and absence of leaks. If non-conforming cans are detected, an automated HEUFT reject module removes them from the conveyor. This protects the quality of downstream processes. Additionally, this step prevents unnecessary packaging of defective units. Overall, the system minimizes waste and downtime. Conveying and packaging Subsequently, CFT conveyors transport the approved cans to an SMI shrink wrapper. The packer forms bundles in multiple formats: 4×3 (12 cans), 6×4 (24 cans), and 2×2×3 (12 cans). This offers flexible configuration to support different packaging and distribution strategies. Alongside improved logistics, this packaging variety enables quick product changeovers. Accordingly, the line adapts well to diverse market demands. Mixing, carbonating, and labelling Before filling, a CFT mixer/carbonator prepares the product by adjusting the syrup-to-water ratio and saturating the liquid with CO₂...

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, Barbaric Pillar Slewing Crane with Vacuum Lifter Cgodevy Trnopfx Ahxet - Jib length: 6 m - Overall height: 4.3 m - Load capacity: 250 kg - Comfort control: all functions on the handle, lift/lower, tilt, suction/release - Tiltable by 90° - Lifting speed steplessly adjustable from 0–10 m/min - Chain length: 3.5 m - 230V, 3x1.5 mm² - Operating pressure: 6 bar, filtered, dry compressed air required - Safety system - Reinforced crossbeam: Reinforced version for slightly permeable and mildly textured panels Further details upon request. Showroom machine, viewing available by appointment.

Stanje: rabljeno, Leto izdelave: 2017, številka stroja/vozila: LC623, Rabljena termoformirajoča polnilno-pakirna linija za vodne lončke – 11.500 BPHTehnične specifikacije in zmogljivostTa rabljena linija za polnjenje je popolna rešitev za oblikovanje, polnjenje in pakiranje lončkov, zasnovana za proizvodnjo pijač, zlasti vode. Glavni element linije je TR-ALP 10 stroj za oblikovanje-polnjenje-zapiranje lončkov (form-fill-seal), ki termoformira, polni, zatesni in reže PET lončke z visoko učinkovitostjo. S formatom 5x2 (10 ležišč na cikel) in delovno kapaciteto 17–20 ciklov/min sistem dosega do 12.000 lončkov/uro, kar je idealno za rabljene industrijske pakirne linije, ki potrebujejo zanesljiv izhod. Vgrajena oprema za konec linije vključuje robotski pakirni stroj (robot cartoner), avtomatsko postavljalnico kartonov (case erector), zapiralnik kartonov (case sealer) ter transportne trakove za nemoteno nadaljevanje procesa.Proizvodna hitrost: do 12.000 lončkov/uro (običajno 10.200–12.000 lončkov/uro)Cikli: 17–20/minLežišča: 5x2 (10 lončkov/cikel)Velikost odprtine: 71 x 71 mmPodprti formati lončkov: 100 ml in 200 mlOsnovni material: PET folija, 500–700 mikronovMateriali pokrovčkov: aluminij 40 µm ali 12 µm / APET + 12 µm / HSL zatesnljivo in odlepljivoDotikalni deli izdelka: nerjaveče jeklo AISI 316Največja širina folije: 390 mm (spodnja), 375 mm (zgornja)Premer navitja: spodaj 800 mm, zgoraj 300 mmTeža glavnega stroja: približno 2.500 kgZapiralnik: GEM F470Postavljalnik kartonov: F2000Napredni sistemi avtomatizacije in krmiljenjaLinija ima zanesljivo avtomatizacijo za konsistentno oblikovanje lončkov, natančno doziranje in varno zapiranje. TR-ALP 10 uporablja časovno nadzorovan gravimetrični dozirni sistem z 10 ventili za enakomerno polnjenje. Električna arhitektura je industrijskega razreda z ustreznimi zaščitami in varnostnimi vezji.Napajanje: 3 x 380 V ACVgrajena moč: 25 kWTok: 40 AFrekvenca: 50 HzKrmilna napetost: 24 V DCDozirni sistem: časovno krmiljen gravimetrični, 10 ventilovTemperatura polnjenja: 15–25 °CVarnostna oprema: vgrajena stikala za izklop in varnost (industrijske komponente)Integracija v proizvodne linijeLinija je zasnovana za enostavno integracijo termoformiranja in pakiranja z avtomatskim manipuliranjem kartonov na koncu linije. Robotski pakirni stroj omogoča pakiranje lončkov v več formatih, s programi za pakiranje 100 ml in 200 ml. Avtomatsko postavljanje in zapiranje kartonov ter trije transportni trakovi omogočajo enovrstno ali modularno postavitev po željah uporabnika.Konec linije: robotski pakirni stroj, postavljalnik F2000, zapiralnik GEM F470, transportni trakoviPakirna konfiguracija: 30 lončkov/karton (200 ml: 2 sloja 15x2; 100 ml: 3 sloji)Formatna prilagodljivost: komplet orodij 100 ml in 200 mlPosode: PET lončki; sekundarno pakiranje v kartoneStanje stroja & vzdrževanje na zahtevo. Cgjdpfx Ahey Icp Dexet

Stanje: rabljeno, Leto izdelave: 2006, obratovalne ure: 68.702 h, številka stroja/vozila: LC624, Gebrauchte KRONES Wasser-Abfüllanlage – 32.000 Flaschen pro Stunde Technische Spezifikationen & Leistungsdaten Diese komplette, gebrauchte Abfülllinie wurde für die hocheffiziente Verarbeitung von PET-Flaschen und die Getränkeproduktion entwickelt. Hergestellt von Krones im Jahr 2006, bietet sie zuverlässige Leistung für industrielle Verpackungslösungen im großtechnischen Maßstab. Die Linie umfasst Blasformen, Füllen, Etikettieren, Codieren, Schrumpfverpacken, Tragegriffapplikation, Palettieren und Paletten-Etikettierung – eine robuste End-to-End-Produktionslösung, ideal für den Gebrauchtmaschinenmarkt mit Bedarf an hoher Verfügbarkeit und gleichbleibender Produktqualität. Produktionskapazität: bis zu 32.000 Flaschen pro Stunde Flaschenformate: kompatibel mit 0,5 L und 1,5 L PET-Flaschen Behälter: Ausgelegt für PET-Flaschenverarbeitung Hersteller (Hauptkomponenten): Krones Baujahr (Kernlinie): 2006 Bisherige Betriebsstunden: 68.702 Steuerung: Siemens SPS Füllkontrolle: Elektronisch geregelt mit Durchflussschaltern (volumetrisch) Wesentliche Maschinen und Module: - Krones Contiform S20 Streckblasmaschine (2006) - Krones Volumetric Füller (2006) - Krones Verschließer (2006) - Krones Checkmat Flascheninspektor (2006) - Krones SynCo Flaschenförderer (2006) Cgedsy Icpqjpfx Ahxot - Krones Etima Etikettiermaschine (2006) - Markem Smart Lase C350 Lasercodierer (2015) - Ocme Vega N70/2 Schrumpfpacker - Comag/Decimo HM 100/2 Tragegriffapplikator (2006) - Ocme Pegasus M400 Palettierer (2006) - Bema Silkworn Turbo Palettenwickler (2006) - Eidos 7P6ERLP Palettenetikettierer (2020) - M. Tanner AG/Prologic Preform-Zuführbehälter (2018) - M. Tanner AG Preform-Ausrichter (2006) - Gassner Verschluss-Zuführbehälter (2006) - Cryotech International Stickstoff-Dosierer - Europool Packförderer Erweiterte Automatisierungs- & Steuerungssysteme Die Linie ist mit einer Siemens SPS-basierten Automatisierung ausgestattet, die eine koordinierte Steuerung der Blasform-, Füll-, Etikettier- und End-of-Line-Prozesse gewährleistet. Der Füller arbeitet mit elektronisch geregelten Durchflussschaltern für exakte, volumetrische Abfüllung und gleichmäßige Füllstände bei hoher Geschwindigkeit. Zentralisierte Steuerung, synchronisierte Fördertechnik und integrierte Inspektionssysteme steigern die Produktivität und minimieren Umrüstzeiten sowie Stillstand. - Siemens SPS-Architektur über die gesamte Linie - Volumetrische Füllung mit elektronischer Durchflussregelung - Integrierte Inspektion via Krones Checkmat - Koordinierte Förderlogik über Krones SynCo - Lasercodierung durch Markem Smart Lase C350 Produktionslinien-Integrationsfähigkeit Diese Produktionslinie bietet eine nahtlose Integration von der Preformzuführung bis zur Palettenetikettierung. Die Krones SynCo- und Europool-Fördertechnik ermöglichen reibungslose Übergänge zwischen den Modulen, während Schrumpfpacker, Tragegriffapplikator, Palettierer, Stretchwickler und Palettenetikettierer einen vollautomatischen Verpackungs- und Logistikfluss sicherstellen. Inlinelösung vom Streckblasformer bis zum Palettenetikettierer Formatkompatibilität: 0,5 L und 1,5 L PET-Formate

Stanje: rabljeno, Leto izdelave: 1999, številka stroja/vozila: M271, Used FIMER 20/20/3/3 Monoblock Filler – up to 4,500 bph This monoblock efficiently processes still liquids such as water and wine. Notably, FIMER manufactured this machine in 1999, resulting in an output of up to 4,500 bottles per hour (BPH) for filling 0.75-liter glass containers. Additionally, this unit is currently in storage and immediately ready for operation. Monoblock Design and Operation The machine operates with a clockwise rotation, allowing smooth and continuous transfer of containers through each processing station. As a result, this rotary design precisely synchronizes rinsing, filling, and capping cycles to maximize productivity and minimize downtime during bottling. This ensures an efficient workflow throughout the entire process. Cgedpfx Aevgvd Hehxjt Technical Data and Electrical Specifications The unit connects to a 380 V power supply and operates at 6.5 kW with a frequency of 50 Hz. These specifications are compliant with most industrial power systems and provide sufficient capacity for all filling phases. Rinser Station Equipped with 20 grippers in the rinsing station, the machine handles each bottle with a single rinse to prepare it for filling. This feature enables the monoblock to quickly and effectively rinse the containers, remove residues, and ready them for the next phase. Filling Station – FIMER 20/20/3/3 up to 4,500 bph In the filling section, the machine utilizes 20 fixed valves operating with a gravity or light vacuum system, ensuring uniform fill levels for every bottle. This design offers both speed and precision, achieving a consistent output of up to 4,500 BPH. This filling method is particularly suitable for still products such as water and wine, preserving their properties and preventing turbulence. Capping Station The capping station is fitted with three heads for aluminum screw caps and three heads for straight cork closures. As a result, the machine can accommodate various closure types, including 31×18 mm closures. This versatility ensures a tight, protective seal for containers after filling. Safety Features of the Used FIMER 20/20/3/3 Monoblock Filler – up to 4,500 bph Lastly, the monoblock includes advanced safety systems to protect both operators and bottles during operation. These safety features further enhance reliability and ensure consistent, trouble-free machine performance.

Stanje: rabljeno, Leto izdelave: 1994, 1994 Bacci FCH8 dvovretenski rezkar s 4 glavami na vsaki strani (3 za rezkanje in 1 za brušenje) Codpox Hwmbsfx Ahxogt Mere: 7,20 x 2,40 x 1,90 m Približna teža: 5 ton

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 796.299 km, Leto izdelave: 1999, MAN 33464, 6x4, zračno vzmetenje, ojačani nosilci okvirja, tehnična dovoljena skupna teža 33 t. S pretečeno tehnično, madžarski papirji, začas izpisano. Uporabno stanje glede na starost. Platforma: 620 x 250 (izdelal Schwarzmüller v Nemčiji), s pritrdili za tovor, ojačana zadnja stena (nosilec tovora). Dvigalo: Palfinger 66000 E (1999) s 6 hidravličnimi segmenti, 2,5 t vitlo, dodatna oprema. Krmilni blok na dvigalu je bil obnovljen, radijsko daljinsko upravljanje dvigala je novo: oddajnik, sprejemnik, dalinski upravljalnik, kabli, celoten komplet. 4,3 m /13,5 t; 9,0 m /6,1 t; 16,0 m / 3,2 t. Cgsdey Ivhaopfx Ahxet

Stanje: novo, Leto izdelave: 2025, Furnace output: 510 kW Effective output: 407 kW New equipment, original packaging: Yes Flue outlet diameter: 250 mm Hot air distribution ducts: 4 x 350 mm Combustion chamber length: 1900 mm Combustion chamber width: 900 mm Combustion chamber height: 900 mm Air delivery: 26,000 m³/h Power consumption: 4,500 W Designed for room volume: 8,000 m³ Heatable area: 1,800 m² Furnace height without hot air ducts: 3,000 mm Furnace width: 1,220 mm Furnace length without flue gas fan: 2,700 mm Weight: 1,575 kg Cgsdpfx Ask Utrwjhxet

Stanje: novo, Leto izdelave: 2025, Furnace output: 350 kW Working output: 279 kW Flue outlet diameter: 200 mm Cjdpfx Ahek Utrtjxsgt Warm air distribution ducts: 3 x 300 mm Furnace length: 1,200 mm Furnace width: 740 mm Furnace height: 1,040 mm Air delivery: 17,800 m³/h Warm air blower power consumption: 3 kW Flue gas fan power consumption: 600 W Designed for room volume: 5,000 m³ Area to be heated: 1,000 m² Oven height without warm air ducts: 2,500 mm Oven width: 1,100 mm Oven length without flue gas fan: 1,900 mm Weight: 850 kg

Stanje: novo, Leto izdelave: 2024, Combustion chamber output: 175 kW Working output: 140 kW Flue outlet diameter: 200 mm Warm air distribution ducts: 3 x 250 mm Combustion chamber length: 950 mm Cedpfx Ajk Utrpjhxegt Combustion chamber width: 600 mm Combustion chamber height: 860 mm Air delivery: 8,900 m³/h Power consumption: 3,500 W Designed for room volume: 3,000 m³ Heatable area: 500/600 m² Oven height without air distribution ducts: 2,200 mm Oven width: 930 mm Oven length without flue gas fan: 1,700 mm Weight: 615 kg

Stanje: novo, Leto izdelave: 2025, Furnace output: 125 kW Operating output: 99 kW Flue outlet diameter: 180 mm Warm air distribution ducts: 2 x 250 mm Combustion chamber length: 750 mm Combustion chamber width: 560 mm Combustion chamber height: 700 mm Air delivery: 6,300 m³/h Cjdpfjk Utrhjx Ahxegt Power consumption: 1,500 W Designed for room volume: 1,500 m³ Area to be heated: 300/350 m² Stove height without warm air ducts: 1,980 mm Stove width: 800 mm Stove length without flue gas fan: 1,280 mm Weight: 415 kg

Stanje: novo, Leto izdelave: 2025, Fire chamber output: 34 kW Working output: 29 kW New device: yes, originally packed Warm air blower, flue gas blower, and control unit with digital display: included Warm air ducting pipes: 2 x 180 mm with freely rotatable plug-in 90° bends Flue outlet diameter: 160 mm Fire chamber length: 500 mm Fire chamber width: 400 mm Fire chamber height: 590 mm Air delivery rate: 2200 m³/h Power consumption: 400 W Designed for room volume: 500 m³ Heatable area: 100/150 m² Stove height without warm air ducting pipes: 1560 mm Stove width: 550 mm Stove length without flue gas blower: 920 mm Codjk Utraspfx Ahxsgt Weight: 190 kg