Berg & Schmid Krožne Žage nakup rabljenega (112)

Stanje: novo, Saw blade diameter: 370 mm Cutting capacity at 90 degrees (round): 120 mm Cutting capacity at 90 degrees (square): 100 mm Cutting capacity at 90 degrees (rectangular): 180x100 mm Working height: 925 mm Saw blade speeds: 15 - 70 rpm Total power requirement: 1.8/2.2 kW Machine weight: approx. 0.71 t Space requirement: approx. 1.9 x 1.45 x 2.1 m SPECIAL OFFER PRICE!!! High-Performance Vertical Circular Saw, Hydropneumatic Fully Automatic (20192) · Mitre cutting left 60° / right 45° · Hydro-pneumatic control of the saw unit · Electro-pneumatic automatic material feed unit · Smooth-running, high-performance worm drive with large gear ratio, integrated into a robust cast housing for optimal cutting results · Vise with double clamping arm for low-burr cuts, additionally with quick lateral positioning for mitre adjustment · Precision prismatic guide for the gearbox head, laterally adjustable · Particularly stable base frame with integrated automatic coolant system · Large chip drawer · Chip removal brush in the saw blade guard MPS control system: · Storage of cut start/end positions · Display of current consumption, piece count, cutting time... · Adjustable water cooling · Cutting pressure regulator Gedpfx Aod Iin Hjdxjtt IMPORTANT: Price does NOT include saw blade! (Saw blade price €204)

Stanje: novo, Saw blade diameter: 370 mm Cutting range at 90°: round 120 mm Cutting range at 90°: square 100 mm Cutting range at 90°: rectangle 180x100 mm Working height: 925 mm Saw blade speed: 17 – 70 rpm Total power requirement: 3.0 kW Machine weight approx.: t Space requirements approx.: 1.9 x 1.45 x 2.1 m SPECIAL OFFER PRICE!!! High-performance vertical circular saw, hydropneumatic fully automatic (20195) · Mitre cutting: left 60° & right 45° · Hydro-pneumatic control of the saw unit · Electro-pneumatic material feed unit · Smooth-running, powerful worm gear drive with large gear ratio, integrated in a robust cast housing for optimal cutting results · Vise with double clamping arm for burr-free cuts, additionally with lateral quick-shift for mitre changes Gtjdpfx Aded Iin Esxot · Precision prismatic guideway for gearbox head, laterally adjustable · Particularly robust base frame with built-in cooling system · Large chip drawer · Chip removal brush integrated in the saw blade cover CNC Control: · With control panel for more than 90 different sawing programs with 99 sub-programs for length, quantity, and angle · Automatic feed unit 2,000 mm via ball screw, incremental feed with automatic length compensation. Adjustable for cut lengths from 25 to 9,999 mm. · Fully hydraulic control of saw frame and clamping fixtures · Preselection of 3 different material feed rates · Visualization of the complete work process with simple data input ATTENTION: Price does not include saw blade! (Saw blade price: €204)

Stanje: novo, Cutting diameter: 255 mm Saw band length: 2765 x 0.9 x 27 mm Cut width: 300 x 180 mm Speeds: 35 + 70 rpm Total power requirement: 1.8 kW Machine weight: approx. 450 kg Space requirement: approx. 1.7 x 1.23 x 1.75 m SPECIAL OFFER!!! Double-mitre metal band saw, frequency inverter, hydraulic semi-automatic GBS 250 Super HA-I Easy • Mitre cuts: left 60° + right 45° • Material height sensor (automatic cut start detection) • Frame and gearbox made from a single casting: extremely quiet and low-vibration operation • Hydraulically operated vice, laterally adjustable • Guided, high-quality industrial bearings • Heavy-duty vice and machine cast frame • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring via ammeter Gtodpfefn Andjx Adxjt • Adjustable cutting pressure feed regulator • Support roller on infeed side • Ball-bearing rotary table Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid descent to material start or, for serial cutting, start cutting immediately 4. Stop saw band 5. Raise frame slightly above the material 6. Open vice

Stanje: novo, Cutting capacity at 90°: round 255 mm Cutting capacity at 90°: square 240 mm Cutting capacity at 90°: rectangular 300 x 180 mm Saw blade length: 2,765 x 27 x 0.9 mm Table height: 950 mm Band speed: 18 - 110 m/min Total power requirement: 1.5 kW Machine weight approx. 0.42 t Space requirement approx. 1.23 x 1.7 x 1.75 m SPECIAL PRICE!!! Double mitre metal band saw, frequency inverter, hydraulic semi-automatic GBS 250 Super HA-I Easy • Mitre cuts left 60° / right 45° • Material height sensor (automatic cut start detection) • One-piece cast frame and gearbox, extremely quiet and low-vibration operation • Hydraulically movable vice • Guided, high-quality industrial bearings Gtsdpfefgyh Usx Adxjt • Heavy-duty vice & machine casting • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring via ammeter • Adjustable feed pressure regulator • Infeed support roller • Ball-bearing turntable Semi-automatic operation: 1. Clamp material 2. Saw starts 3. Rapid downfeed to material or, for series cutting, direct cutting 4. Saw blade stops 5. Raise frame just above the material 6. Open vice

Stanje: novo, Cutting capacity at 90°: round 305 mm Cutting capacity at 90°: square 260 mm Gtsdpfxofgyiae Adxst Cutting capacity at 90°: rectangle 350 x 200 mm Saw band length 3375 x 27 x 0.9 mm Band speed 18 – 100 m/min Table height 940 mm Total connected load 1.5 kW Machine weight approx. 0.65 t Space requirement approx. 1.5 x 1.75 x 1.9 m SPECIAL OFFER PRICE!!! Double miter metal band saw, hydraulic semi-automatic GBS 305 HA-I Easy - Miter cuts up to 60° left and 45° right - Material height sensor - Ball-bearing turntable - Hydraulic vice, laterally adjustable - Heavy-duty, large material support - Automatic coolant system

Stanje: novo, Cutting capacity at 90° (round): 350 mm Cutting capacity at 90° (square): 330 mm Cutting capacity at 90° (rectangle): 450 x 320 mm Saw band length: 4250 x 34 x 1.1 mm Band speed: 40 + 80 m/min Table height: 845 mm Saw blade width: 34 mm Total power requirement: 2.2 kW Machine weight: approx. 0.985 t Space requirements: approx. 1.4 x 2.0 x 2.2 m Double mitre band saw, hydraulic semi-automatic, DGS 350/450 HA-I • Mitre cuts left & right up to 60° without machine conversion • 34 mm saw blade width • Large, ball-bearing supported, rotary worktable • Saw blade guides adjustable over extra-wide linear rails • Heavy-duty, robust gearbox • Large-area clamping plates • Infeed and outfeed roller • Removable chip tray (for cleaning) • Free-standing, safe, ergonomic control panel • Storage space for blades and consumables • Cutting pressure control and feed rate regulator • Fully hydraulic vice • Quick clamping (front loading) • Material height sensor (automatic cut start detection) Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid descent to start of material or direct cutting for series cuts 4. Switch off saw band Gsdpfx Adsfgyicsxjtt 5. Raise frame just above the material 6. Open vice Optimal, material-independent cutting results through fine adjustment of the saw frame via: * Pressure control valve (cutting force) * Feed rate control valve (cutting speed) * Clearly arranged selector switch with pictograms for intuitive operation

Stanje: novo, Cutting capacity at 90°: round 350 mm Cutting capacity at 90°: square 330 mm Cutting capacity at 90°: rectangle 500 x 310 mm Band speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 4250 x 34 x 1.1 mm Total power requirement: 2.2 kW Machine weight approx. 1.2 t Space requirements approx. 1.4 x 2.4 x 1.935 m SPECIAL OFFER PRICE!!! 2-Column Double Mitre Bandsaw K-tech DG 50/33 HA-I • 2-column mitre saw • Robust yet easy to operate • Material height sensor (automatic cut start detection) Gtjdpfx Adsfg E Hljxot • Smooth running thanks to angled cut, feed regulator and cutting pressure regulator • Heavy-duty material infeed roller • Removable chip tray (for cleaning) • Energy-efficient and low vibration thanks to angled cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 – 100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vices • LEDs for monitoring all safety functions • Large-dimension drive wheels (520 mm) dia. • Intuitive mitre angle adjustment up to 60° Semi-automatic operation: 1. Clamp material 2. Saw starts 3. Rapid downfeed to start of material or immediate cutting for serial cuts 4. Saw band off 5. Raise frame just above material 6. Open vice

Stanje: novo, Cutting capacity at 90°: round 305 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: rectangle 350 x 200 mm Saw blade length: 3375 x 27 x 0.9 mm Blade speed: 37 + 74 m/min Table height: 940 mm Total power requirement: 1.5/1.8 kW Machine weight approx. 0.65 t Space requirement approx. 1.5 x 1.75 x 1.9 m SPECIAL PRICE!!! Double miter metal band saw, hydraulic semi-automatic GBS 305 HA-I Easy - Miter cuts up to 60° left and 45° right - Material height sensor - Ball-bearing rotary table - Hydraulically operated, laterally adjustable vice - Heavy-duty, large material support Gtodped Iipxjfx Adxot - Automatic coolant system

Stanje: novo, Cutting range at 90 degrees: round 250 mm Cutting range at 90 degrees: square 210 mm Cutting range at 90 degrees: rectangle 290 x 210 mm Saw band length: 2,965 x 27 x 0.9 mm Table height: 940 mm Band speed: 35 + 70 m/min Total power requirement: 1.1 / 1.3 kW Machine weight approx. 0.35 t Space requirement approx. 1.3 x 0.8 x 1.5 m SPECIAL PROMOTIONAL PRICE!!! Double mitre metal bandsaw featuring: - Band speed 35 + 70 m/min - Mitre cuts up to 60° left and 45° right - Ball-bearing turntable for rapid mitre adjustment - Movable quick-action vice Godpfed Iip Nex Adxett - Quick-release lever - Automatic coolant system

Stanje: novo, Cutting capacity at 90° (round): 250 mm Cutting capacity at 90° (square): 210 mm Cutting capacity at 90° (rectangular): 290 x 210 mm Saw blade length: 2,965 x 27 x 0.9 mm Table height: 940 mm Gtjdpfxefgyh So Adxet Blade speed: 25 - 90 m/min Total power requirement: 1.1/1.3 kW Machine weight: approx. 0.35 t Space requirement: approx. 1.3 x 0.8 x 1.5 m SPECIAL PRICE!!! Double miter metal band saw Hydraulic semi-automatic with: - Hydraulic vice - Material height sensor - Cut monitoring via ammeter - Cutting pressure and feed rate regulator - Blade speed 25 - 90 m/min - Miter cuts up to 60° left and 45° right - Patented, ball-bearing rotary table for easy miter adjustment - Movable quick-release vice - Quick-release lever - Automatic cooling system

Stanje: novo, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900x900 mm Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Gedpofg E Hpefx Adxstt Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top-tier sawing technology and maximum performance when cutting specialty steels. - The electro-welded machine frame and the steel saw frame meet all cutting requirements and eliminate vibrations and noise. - The chip conveyor is hydraulically driven and the speed is adjustable. - All machine motions (saw frame, vice, feed, saw band guides) are enabled by modern linear guides with high static and dynamic load capacity, guaranteeing very low sliding friction. - Another key feature is the material positioning rollers, which are powered by a hydraulic motor. These move at a right angle to the material, allowing for optimal clamping. - Thanks to the saw band position height control, the operator can position the band close to the material’s upper edge. After cutting, the band automatically returns to the previous position; alternatively, the 'remain' option in the lower position can be selected. During the cutting cycle, the software compares cutting force with preset values and can stop the sawing system in case of irregularities. - The saw band is cleaned by two adjustable steel brushes, which are hydraulically driven. - The hydraulic unit, including filter and manometer, ensures especially smooth operation at constant pressure. - Precision ground carbide inserts clamp the saw band, complete with lateral, hardened, and adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. - The saw band is tensioned by a hydraulic cylinder, controlled by the machine software. Tension is automatically released after a preset time when the machine is idle or after a cycle is completed. - Automatic version with CNC control available for the X-TECH 900 / 1200 models with a feed length of 500 mm for high production series. - The material is supported by a table with seven rollers, powered by a hydraulic orbital motor, allowing precise material positioning even under maximum load. - All guided motions are facilitated by four ball circulation guides with high static and dynamic load capacities; significantly reduced feed friction. Hardened and ground prismatic guides. Price on request.

Stanje: novo, Cutting capacity at 90°: round 310 mm Cutting capacity at 90°: square 280 mm Cutting capacity at 90°: rectangle 400 x 250 mm Saw blade length: 4020 x 34 x 1.1 mm Blade speed: 37 + 74 m/min Table height: 940 mm Total power requirement: 1.8/2.2 kW Machine weight: approx. 0.68 t Space requirement: approx. 1.5 x 1.78 x 1.3 m SPECIAL OFFER PRICE!!! Gtsdpfod Iiptox Adxet Double miter bandsaw, hydraulic semi-automatic, GBS 310/400 HA-I Easy • Miter cut left 60° / right 45° • Heavy-duty industrial hydraulics, 18 bar • Optimal access to the workpiece • Ammeter for monitoring: - Cutting force optimization - Blade life - Cut accuracy • Hydraulic vice: automatic clamping and release • Swarf removal brush • Material turntable with ball bearings • Quick-release vice, movable • Height sensor for material (automatic cut start detection) Semi-automatic operation: 1. Clamp material 2. Start saw 3. Fast lowering to material, or for serial cuts, start cutting immediately 4. Saw blade stops 5. Raise saw frame slightly above material 6. Release vice

Stanje: novo, Cutting capacity at 90°: round 250 mm Cutting capacity at 90°: square 210 mm Cutting capacity at 90°: rectangular 290 x 210 mm Saw band length: 2,965 x 27 x 0.9 mm Table height: 940 mm Band speed: 35 / 70 m/min Total power requirement: 1.1/1.3 kW Machine weight approx. 0.35 t Required space approx. 1.3 x 0.8 x 1.5 m SPECIAL OFFER PRICE!!! Gtedpfx Adod Iip Rsxot Double mitre metal bandsaw, hydraulic semi-automatic, equipped with: - Hydraulic vice - Material height sensor - Cut monitoring via ammeter - Adjustable cutting pressure feed regulator - Band speed 34 / 74 m/min - Mitre cuts up to 60° left and 45° right - Patented ball-bearing turntable for easy mitre adjustment - Rapid-action vice, movable - Quick-release lever - Automatic coolant system Shipping cost share: 120 EUR

Stanje: novo, Cutting capacity at 90 degrees: round 305 mm Cutting capacity at 90 degrees: square 260 mm Cutting capacity at 90 degrees: rectangle 350 x 200 mm Saw blade length: 3375 x 27 x 0.9 mm Gjdpfx Adjfd Abajxjtt Blade speed: 37 + 74 m/min Table height: 940 mm Total power requirement: 1.5/1.8 kW Machine weight: approx. 0.61 t Required space: approx. 1.5 x 1.75 x 1.9 m Double miter metal band saw with AutoCut function - Miter cuts up to 60° left and 45° right - Ball-bearing rotary table - Vise laterally adjustable - Solid, large material support - Automatic cooling Illustration shows semi-automatic version.

Stanje: novo, Cutting capacity at 90° (round): 250 mm Cutting capacity at 90° (square): 210 mm Cutting capacity at 90° (rectangular): 290 x 210 mm Saw blade length: 2,965 x 27 x 0.9 mm Table height: 940 mm Blade speed: 25 – 90 m/min Total power requirement: 1.1 / 1.3 kW Machine weight: approx. 0.35 t Required space: approx. 1.3 x 0.8 x 1.5 m Gtjdpfxsfgyh Rj Adxst SPECIAL PROMOTIONAL PRICE!!! (20347) Double miter metal band saw featuring: - Blade speed: 25 – 90 m/min - Miter cuts up to 60° left and 45° right - Ball-bearing turntable for quick miter adjustment - Sliding quick-release vise - Quick-clamping lever - Automatic coolant system

Stanje: novo, Cutting diameter: 220 mm Gtodpfed Iip Tox Adxjt Saw band length: 2455 mm Table height: 850 mm Cutting width: 230 mm Cutting speed: 25 - 80 m/min Saw band dimensions: 2455 x 27 x 0.9 mm Cutting capacity at 60° round: 90 mm Cutting capacity at 60° square: 90 mm Cutting capacity at 60° flat: 90 x 100 mm Cutting capacity at 45° round: 150 mm Cutting capacity at 45° square: 150 mm Cutting capacity at 45° rectangular: 150 x 210 mm Cutting capacity at 90° round: 220 mm Cutting capacity at 90° square: 210 mm Cutting capacity at 90° rectangular: 230 x 185 mm Total power requirement: 1.2 kW Machine weight: approx. 0.24 t Space requirement: approx. 1.2 x 0.6 x 1.7 m SPECIAL OFFER PRICE!!! -Mitre cuts up to 60° to the left -Cutting speed 25 - 80 m/min -Vice with quick-release mechanism -Carbide saw band guide -Band tension control -Electric coolant system Auto-Cut System = 3-stage system: -Automatic saw frame descent via hydraulic cylinder -Infinitely variable feed rate -With limit switch -Rapid descent of the saw frame from home position to workpiece, then switches to normal feed rate -Manual operation

Stanje: novo, Cutting diameter: 220 mm Saw band length: 2455 mm Table height: 850 mm Cutting width: 230 mm Cutting speed: 35 + 70 m/min Saw band dimensions: 2455 x 27 x 0.9 mm Gsdod Iip Uspfx Adxstt Cutting capacity at 60° round: 90 mm Cutting capacity at 60° square: 90 mm Cutting capacity at 60° flat: 90 x 100 mm Cutting capacity at 45° round: 150 mm Cutting capacity at 45° square: 150 mm Cutting capacity at 45° rectangular: 150 x 210 mm Cutting capacity at 90° round: 220 mm Cutting capacity at 90° square: 210 mm Cutting capacity at 90° rectangular: 230 x 185 mm Total power requirement: 1.2 kW Machine weight approx. 0.24 t Space requirement approx. 1.2 x 0.6 x 1.7 m SPECIAL PRICE!!! -Mitre cuts up to 60° left -Cutting speed 35 / 70 m / min -Vice with quick-release device -Carbide saw band guides -Band tension control -Electric cooling system Auto-Cut System = 3-stage system -Automatic saw frame lowering via hydraulic cylinder -Infinitely variable feed adjustment -With limit switch -Rapid lowering of the saw frame from resting position to the workpiece, then switch to normal feed rate -Manual operation Freight charge: EUR 85,-

Stanje: novo, Leto izdelave: 2024, Razpon rezanja okroglega jekla pri 45°: 108 mm, Obseg rezanja okroglega jekla pri 90°: 108 mm, največja višina reza: 150 mm, BERG+SCHMID Double Mitre Band Saw GBS 218 Eco AutoCut Cutting Speed: 25-80 m/min Gtedpfx Aet I R Edjdxjt • Mitre cuts left up to 60° • For cutting steel, stainless steel, and aluminum profiles • Quick-action vice with rapid clamping device a. • Integrated blade tension control b. • Carbide blade guide c. • Electric coolant system • Machine base (supplied disassembled) The AutoCut system consists of: • Hydraulic cylinder, feed control, spring package, end switch, enabling three operating modes: 1. Automatic lowering of the saw frame via hydraulic cylinder with steplessly adjustable feed control valve and limit switch at the end of the cut 2. Rapid descent of the saw frame from rest position to the workpiece, then switches to normal feed rate 3. Manual operation – hydraulic cylinder functions as a brake cylinder Saw blade dimensions: 2455x27x0.9mm Additional accessories such as saw blades, roller conveyors, length stops, minimum quantity lubrication, etc. available on request! Delivery time: ex stock Waiblingen Beinstein

Stanje: rabljeno, Leto izdelave: 2003, Max. saw blade diameter: 300 mm Gtedoud Tq Tjpfx Adxjt 2-speed adjustment Incl. roller conveyor Max. cutting height: 120 mm Weight: 450 kg

Stanje: rabljeno, Technical Details: Saw blade diameter: 350 mm Cutting capacity at 90 degrees, round: 110 mm Cutting capacity at 90 degrees, square: 85 x 85 mm Cutting capacity at 90 degrees, flat: 180 x 85 mm Cutting capacity at 45 degrees, round: left/right: 105 / 110 mm Cutting capacity at 45 degrees, square: left/right: 85 x 85 / 85 x 85 mm Cutting capacity at 45 degrees, flat: left/right: 130 x 85 / 130 x 85 mm Saw blade bore: 40 mm Speed range – stepless: 9 / 18 / 36 / 74 / 4-step rpm Rotary table: Ø 400 mm/min Table swiveling +/-: 60° right and 45° left Compressed air connection: 7 bar Total power requirement: approx. 2.2 kW Machine weight approx.: 430 kg Machine dimensions: W: 0.7 x D: 1.01 x H: 2.1 m The circular saw is an electro-hydro-pneumatic semi-automatic circular saw, which allows mitre cuts up to 45° to the left and 60° to the right on profiles and solid materials. Vertical circular saw Gtedpfx Aeu Nilyedxot Robust, heavy cast construction Max. vice opening: 180 mm Cut counter Vertical travel of saw head: 200 mm Vice opening width max.: 180 mm (jaw size W: 220 x H: 70 mm) Operation via control panel

Leto izdelave: 2019, Stanje: pripravljen za uporabo (rabljen), Dodatna oprema Začetni komplet 1, ki vsebuje 2 krožni žagi in 10 litrov koncentrata hladilne tekočine. Izravnalni element (1 komplet = 4 kosi) z navojno palico M 12x100. Podajalna stran – levo. Podajalni valjčni transporter URB 290, dolžina 3000 mm. Podajalni adapter za URB 290/400. Gtjdpsx Nr Sqsfx Adxst Odvodni valjčni transporter URB 290, dolžina 2000 mm. Odvodni adapter za URB 290/400. Priključni kos za stroj, namestitev na desni strani. LM 55 M/man. dolžinski omejevalnik, merilna dolžina 2000 mm. Ta BERG & SCHMID VKS 370 VA je bil izdelan leta 2019. Gre za popolnoma avtomatsko hidropnevmatsko vertikalno krožno žago s CNC frekvenčno pretvorbo. Stroj vključuje valjčni transporter na podajalni (3 m) in odvodni strani (2 m), kar omogoča boljšo manipulacijo z materialom. Priložen je Začetni komplet 1 s krožnimi žagami in koncentratom hladilne tekočine. Izkoristite priložnost za nakup te BERG & SCHMID VKS 370 VA krožne žage za kovine. Za več informacij nas kontaktirajte. Možnosti uporabe Žaganje

Stanje: novo, Cutting diameter 240 mm Saw blade length 2730 mm Cutting width 270 mm Cutting speed 37 + 74 m/min Saw blade dimensions 2730 x 27 x 0.90 mm Cutting capacity at 90° round 240 mm Cutting capacity at 90° square 230 mm Cutting capacity at 90° rectangle 270 x 230 mm Cutting capacity at 45° round 210 mm Cutting capacity at 45° square 200 mm Cutting capacity at 45° rectangle 200 x 210 mm Cutting capacity at 60° round 130 mm Cutting capacity at 60° square 130 mm Cutting capacity at 60° flat 130 x 160 mm Total power requirement 1.2 kW Machine weight approx. 0.3 t Space requirement approx. 1.6 x 1 x 1.7 m Gtodpohhzl Hefx Adxjt High-quality metal bandsaw with 2 blade speeds, miter cuts up to 60°, coolant automatic system and AutoCut feed system – suitable for cutting solid materials and profiles. Features: * High-quality, robust metal bandsaw for precision cuts * Suitable for cutting solid materials and profiles made of steel, stainless steel, and aluminum * Miter cuts up to 60 degrees to the left * Saw blade speed adjustable in 2 stages * Frame and gearbox in one cast piece for extremely quiet and low-vibration operation * Easy, user-friendly miter adjustment with scale * Quick-action vise with quick-release lever for simple handling * Length stop * Carbide saw blade guides * Electrical monitoring of blade tension, blade breakage, and blade cover. Machine operates only if all safety devices are in place. * Ergonomic industrial handle * Electrical coolant automatic system * AutoCut system with hydraulic cylinder, adjustable feed control, spring pack, and limit switch * Large machine bed * Machine base made of sheet steel construction with front door AutoCut System: * Automatic saw frame lowering via hydraulic cylinder with infinitely adjustable feed and automatic shutdown at end of cut. * Rapid approach lowering of the saw frame from rest position to workpiece, then switch to normal feed rate (e.g., for scribing). * Manual operation: Hydraulic cylinder acts as a brake cylinder (e.g., for notching). Thanks to the brake cylinder, the saw can be positioned at any point during the return stroke.

Stanje: novo, Leto izdelave: 2024, premer žaginega lista: 315 mm, največja višina reza: 150 mm, Razpon rezanja okroglega jekla pri 45°: 108 mm, Obseg rezanja okroglega jekla pri 90°: 108 mm, vrtljajska hitrost (min.): 17 obr/min, največja hitrost vrtenja: 33 obr/min, BERG+SCHMID Vertical Circular Saw Model VKS 315 Speed: 17 + 33 rpm • Mitre cuts: left 60° + right 45° • Vise with double clamping arm (4-way locked) for burr-free cuts and lateral quick adjustment • Saw table with large rotary plate and particularly stable vise for optimal material clamping • Robust prism guide for the saw head (adjustable dovetail guide) • Automatic coolant system • Machine base with chip drawer Gjdpfxerrvn Aj Adxstt • Metal lever for high clamping force • Counterholder with spring package included Saw blade dimensions: 315x40mm Additional accessories such as saw blades, roller conveyors, length stops, minimum quantity lubrication, etc. available on request! Delivery time: from stock Waiblingen Beinstein

Stanje: novo, Cutting diameter: 280 mm Saw band length: 3370 mm Cutting width: 350 mm Saw blade dimensions: 3370 x 27 x 0.9 mm Cutting capacity at 90° round: 280 mm Cutting capacity at 90° square: 250 mm Cutting capacity at 90° rectangular: 350 x 200 mm Cutting capacity at 45° round: 240 mm Cutting capacity at 45° square: 220 mm Cutting capacity at 45° rectangular: 230 x 220 mm Cutting capacity at 60° round: 170 mm Cutting capacity at 60° square: 150 mm Cutting capacity at 60° flat: 170 x 100 mm Gtjdpfoivuqtox Adxet Saw band speed: 37 + 74 m/min Total power requirement: 1.8 kW Machine weight approx.: 0.6 t Space requirement approx.: 1.5 x 1.7 x 2.0 m

Stanje: novo, Leto izdelave: 2023, Razpon rezanja okroglega jekla pri 45°: 108 mm, Obseg rezanja okroglega jekla pri 90°: 108 mm, največja višina reza: 150 mm, BERG+SCHMID Double Mitre Bandsaw GBS 250 Super AutoCut Cutting speed: 18–110 rpm • Mitre cuts: 60° left / 45° right • Quick-release vice, adjustable • Heavy-duty vice and cast iron machine base • Ball-bearing turntable • Hydraulic brake cylinder • Large, heavy-duty material support • Automatic coolant system • Worm gear drive running in an oil bath • Fully enclosed saw frame • Adjustable ball bearings • Tool compartment – base with door • Cut monitoring via ammeter • Variable cutting pressure feed regulator • Support roller (infeed side) • Machine base (supplied dismantled) GBS 250 Super AutoCut 3-Step System: I. Automatic lowering of the saw frame via hydraulic cylinder, stepless feed adjustment, with end switch at end of cut II. Rapid lowering mode for the saw frame up to the workpiece, then automatic switch to normal cutting feed (e.g., for marking) III. Hydraulic cylinder functions as brake cylinder: a) Manual mode (e.g., for notching) or b) Lowering while stationary Saw blade dimensions: 2765x27x0.9 mm Gjdpfxjr Ik Sqs Adxett Additional accessories such as saw blades, roller conveyors, measuring stops, minimum quantity lubrication systems, etc., available on request! Delivery time: ex stock Waiblingen Beinstein