Tračna žaga - vodoravna

BERG & SCHMID GBS 185 Eco AutoCut

Stanje: rabljeno, Technical Details: Swing diameter over bed: 350 mm Swing diameter over cross slide: 200 mm Turning length: 560 mm Centre height: 170 mm Spindle bore: Ø 32 mm Spindle speed range: 36...1,800 / 8 steps rpm Feed range x-axis (longitudinal): 0.02..0.8 m/min Bledovadd Ispfx Afnjd Feed range y-axis (facing): 0.01..0.4 m/min Tailstock quill taper: MT 4 Tailstock quill travel: 140 mm Total power requirement: 5.5 kW Machine weight approx.: 2.0 t Machine dimensions (LxWxH) approx.: 2.1 x 1.1 x 1.4 m Precision Lathe by Mikromat - Travel of carriage: longitudinal = 580 mm; cross slide = 170 mm; top slide = 130 mm - Workpiece holding via 3-jaw chuck Niles Ø 160 mm, speed 2,800 rpm - Quick-change tool post: Multifix Equipment: Coolant pump 4 machine feet Copying attachment

Stanje: novo, Leto izdelave: 2026, Combined Saw-Spindle Moulder minimax st 3c F 16 Tilting saw blade, tilting spindle moulder, and format sliding table made from anodized aluminium Robust steel and cast iron construction Large support surface and precision-cast table High-precision format sliding table made of anodized aluminium (travel distance 2250 mm) Large crosscut frame (900 x 600 mm) with aluminium telescopic fence extendable up to 2660 mm with professional flip stops Max. saw blade diameter 315 mm with scoring unit, tiltable from 90° - 45° Saw rip fence with fine adjustment Sturdy saw unit and large double trunnion spindle moulder unit ensures maximum stability, precision, smooth operation, and long service life Solid and precise machine table made from stress-free cast iron Three manually adjustable spindle speeds from 3500 - 10000 rpm With forward and reverse spindle rotation Standard arc milling guard Safety reversing aluminium fence jaws Two motors with high power reserves Two removable handwheels for convenient and quick operation Dimensions and Weights Weight approx. 470 kg Dust Extraction Connection Dust extraction port diameter 2 x 120 mm Saw blade guard dust extraction port diameter 60 mm Electrical Data Drive motor power 2 x 5.0 kW Connection voltage 400 V Mains frequency 50 Hz Spindle Moulder Spindle tilt 0 – -45 ° Usable spindle length 100 mm Spindle speeds 3500/7000/10000 rpm Max. cutter diameter not retractable 210 mm retractable 180 mm tenoning 275 mm Circular Saw Unit Crosscut length 1600 mm Cut width with rip fence 900 mm Max. crosscut width left of saw blade 2660 mm Saw blade tilt 90–45 ° Max. cutting height 90° 90 mm Max. cutting height 45° 63 mm Max. saw blade projection 90° 100 mm Max. saw blade projection 45° 78 mm Main saw blade diameter 315 mm Main saw blade diameter explanation independent of scoring unit Main saw blade speed 4000 rpm Sliding Table and Table Table length 1112 mm Table width 430 mm Scope of Delivery: Arc milling guard Bedpehp Rdlefx Afnjld Anodized aluminium format sliding table Aluminium fence jaws Flip stops Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: generalkompletno obnovljen (rabljeno), Druck: 150 t Hubweg: 140 mm Bodpfx Afegd H Tpenjld Tischgröße: 510 x 530 mm

Stanje: novo, Bernardo Horizontal Bandsaw HBS 275 - 400 V Technical Specifications Cutting capacity round 90°: 225 mm Cutting capacity square 90°: 200 x 200 mm Cutting capacity flat 90°: 245 x 150 mm Cutting capacity round 45°: 160 mm Cutting capacity square 45°: 160 x 160 mm Cutting capacity round 60°: 100 mm Cutting capacity square 60°: 100 x 100 mm Working height: 910 mm Saw blade dimensions: 2480 x 27 x 0.9 mm Cutting speeds 400 V: 45 / 90 m/min Coolant pump S1 100%: 100 W Blodpfod Du T Isx Afnjd Motor output S1 100%: 1.1 kW Motor input S6 40%: 1.5 kW Voltage: 400 V Machine dimensions (L x W x H): 1430 x 720 x 1700 mm Weight approx.: 190 kg Scope of delivery • Saw blade • Workpiece stop • Base frame • Band tension pressure gauge • Quick-action vice • Coolant system • Hydraulic lowering cylinder • Motor protection switch • Automatic shut-off

Stanje: zelo dobro (rabljeno), Ansemi parallel lathe, model Mono FAP 325 ES, center distance 1500 mm, center height 325 mm, spindle bore 65 mm, motor power 18 kW, overall dimensions (mm): 3300x1200x1700 h, weight 3260 kg Bljdpowcd Hmjfx Afnod

Stanje: rabljeno, Mounting: MK 4 Bedpfx Afeb N Ezrsnjld

Leto izdelave: 2012, Stanje: zelo dobro (rabljeno), številka stroja/vozila: MBHF-KBK1, DEMAG KBK overhead crane system, crane runway dimensions approx. 12m x 3.5m Other dimensions available upon request! Load capacity / lifting capacity: 125 kg (0.125 t) Technical specifications of the system: Crane runway made of Demag KBK1 rails System will be delivered complete: KBK rails, rail connectors, trolleys, end plates, cable festoon system, power supply, brackets/suspenders, etc. Incl. 1 bridge with 125 kg Demag DC-COM chain hoist Bodpfx Afopiarnonsld Crane is dismantled and available immediately Very good used condition, see pictures Item location: 75053 Gondelsheim Shipping by freight forwarder or collection by appointment only Demag KBK1, KBK2, and KBK3 rails are in stock! Other KBK systems with load capacities from 125 kg to 1600 kg are also available. Please enquire about your crane runway with required cantilever load and dimensions.

Stanje: novo, Cutting capacity at 90 degrees, round: 240 mm Cutting capacity at 90 degrees, square: 240 mm Cutting capacity at 90 degrees, rectangular: 165 x 310 mm Saw band length: 2725 x 27 x 0.9 mm Table height: 890 mm Band speed: 35 / 70 m/min Total power requirement: 1.1 kW Machine weight approx. 0.35 t Dimensions (LxWxH): 1.7 x 0.75 x 1.8 m Blodpfjhpktvex Afnsd The Z252/DG is equipped with the following features: - Hydraulic cylinder - Emulsion pump - Eccentric clamp - Base frame - Saw band - 400V plug -16A- The machine is delivered fully assembled and ready for immediate operation.

Stanje: novo, Distance between spindle and table: 470 mm Total power requirement: 2.2 kW Approx. weight: 1,200 kg Dimensions (LxWxH): Length 2,400 mm, Width/Depth 2,160 mm, Height 2,300 mm Spindle speed: 60–4,200 rpm - Heavy-duty design made from high-quality Meehanite cast iron - High rotational accuracy thanks to tapered roller bearings, measured at less than 0.01 mm in the quill - Stepless speed control - Forward/reverse operation for thread cutting - X and Z axes with adjustable 55° dovetail guideways - Y-axis with flat guideway - Drilling-milling head tiltable ±45° - Coolant system - Forward and reverse operation - Automatic quill feed, 3-step (0.04 – 0.15 mm/rev) - Motorized feed in X, Y, and Z axes - Precision microfeed - Milling spindle with precision bearings - Mechanical spindle brake - Drilling depth scale and stop - Cross table with T-slots and coolant groove - Centralized lubrication - Height-adjustable safety shield with microswitch for optimal operator protection from flying chips and parts - Robust and large cross table, precision-machined surface with T-slots MF 4-B: - Cross table load capacity: 300 kg - Large travel distance: X / Y / Z axis 740 mm / 330 mm / 320 mm Dimensions and weights Length: 2,400 mm Width/Depth: 2,160 mm Height: 2,300 mm Weight: 1,200 kg Drilling and milling capacity Max. face mill diameter: 76 mm Max. shank cutter diameter: 25 mm Drilling capacity in steel (S235JR): 24 mm Continuous drilling capacity in steel (S235JR): 20 mm Electrical connection Total connected load: 3 kW Supply voltage: 400 V Phase(s): 3 Ph Current type: AC Mains frequency: 50 Hz Horizontal table Length: 254 mm Width: 1,370 mm Max. vertical spindle-table distance: 405 mm T-slot size: 16 mm Number of T-slots: 3 T-slot spacing: 63 mm Max. load capacity: 300 kg Horizontal spindle Overhang: 0–420 mm Coolant system Coolant pump drive power: 90 W Motor(s) Vertical spindle normal operating power: 2.2 kW Standards and approvals Standard: DIN EN 55011 EMC class: C2 Travel X-axis manual: 820 mm Bljdsd H Hhzepfx Afnjd Y-axis manual: 410 mm Z-axis manual: 400 mm X-axis automatic: 740 mm Y-axis automatic: 330 mm Z-axis automatic: 320 mm Vertical spindle Overhang: 0–420 mm Spindle mount: ISO 40 DIN 2080 Speed range: 60–4,200 rpm Number of speed ranges: 2 Speed regulation control: mechanically stepless Swivel range milling head X-Y plane: 90° Swivel range milling head Z-X plane: 45° Quill diameter: 86 mm Quill stroke: 127 mm Quill feed: 0.04/0.08/0.15 mm/rev Milling head travel Z-axis: 470 mm VPE: 1

Stanje: novo, Delivery pressure: 11 bar Suction capacity: 480 cm³ Volumetric flow rate: 360 (unit missing – please specify, e.g., l/min) Bjdpsvkizgsfx Afnjld Tank capacity: 270 l / bar Number of cylinders: 1 pc. Motor: 400 Volt / 3.0 kW Speed: 892 rpm Machine weight: approx. 200 kg Dimensions (L x W x H): 1.6 x 0.7 x 1.2 m