Polnilne naprave nakup rabljenega (143)

Stanje: rabljeno, System for filling yogurt and curd into round plastic buckets of various sizes and for labeling these with self-adhesive wrap-around labels. The system consists of a separate filling/sealing block and a labeling unit. Filler/Sealer: The plastic buckets are taken from the stack in the bucket magazine and placed onto the conveyor belt. The buckets are sterilized with a hydrogen peroxide and steam heater before filling, and the lids are sterilized before sealing. A calibratable weighing cell doses the product into the buckets until a predetermined weight is reached. The sealer applies lids from the lid magazine onto the buckets and presses them on firmly. Labeler: Inline labeling machine for self-adhesive wrap-around labels. Suitable for various bucket sizes from 1 to 5 kg capacity. Additional info: Gravimetric dosing; Labeling of self-adhesive wrap-around labels Filler/Sealer output approx.: 450 units/h (based on 6-liter buckets), depending on container size and product viscosity Labeler output approx.: 1,080 units/h Gelhcsy Nnb Uocqlebl Formats: Round plastic buckets from 1 to 10 liters Equipment: Bucket filling and sealing machine; Bucket labeling machine

Stanje: rabljeno, Keg-reinigung-, -Abfüll- und -Palettieranlage, ki je sestavljena iz naslednjih komponent: - Zunanji pralec kegov proizvajalca Schöttinger & Schäfer, letnik 1987, model: AW 2RB - Polnilna linija za kege proizvajalca Leifeld & Lemke, letnik 1988, sestavljena iz: 1 linije za predčiščenje, KVR 1, kapaciteta: 140 keg/h 2 liniji za glavno čiščenje in polnjenje, KRF1 in KRF2, kapaciteta: 120 keg/h - CIP-sistem s 5 rezervoarji, letnik 1988 - Raz- in paletiranje proizvajalca RST, letnik 1999, s skladiščem za palete in paletirnim robotom (KUKA KR 125/1) Dopolnilna informacija: Naprava za čiščenje in polnjenje kegov s paletiranjem; letnica 1987–1999 Kapaciteta pribl.: 120 keg/h Upravljanje/krmiljenje: Simatic S7-300 Oprema: Zunanji pralec; linije za predčiščenje, glavno čiščenje in polnjenje; CIP-sistem; paletiranje s skladiščem za palete in robotom. Gslhey Nm Uasccqljbl

Stanje: rabljeno, Leto izdelave: 2011, Enostranski stroj za čiščenje steklenic. Stroj (dodatno): Stroj za pranje steklenic Zmogljivost: 3000 steklenic/uro Dolžina: 4,43 m Širina: 2,60 m Višina: 2,52 m Osnovna konstrukcija: Enostranski stroj Oprema: Usmerjevalna miza; Dovod steklenic; Tlačni filter; Bočno kontrolno okno; Izmenjevalnik toplote; Prelivna črpalka; Črpalka za lug; Vodne črpalke; Prikazovalniki temperature; Krmilna omara z upravljalno ploščo Golhcsy Nm Sxjcqlebl

Stanje: rabljeno, Leto izdelave: 2019, Polavtomatska KEG naprava z dvema postajama. Stroj (dodatno): naprava za čiščenje in polnjenje KEG Moč: 6 kW Tok: maks. 15,0 A Napetost: 400V AC Formati: 10 L, 15 L, 20 L, 30 L, 50 L KEG-i z ravnim priključkom Smer delovanja: z leve proti desni Upravljanje / nadzor: krmilna omara z zaslonom na dotik, Simatic S7-300 Material: nerjavno jeklo Postavitev: prostostoječa Gjlew Uvdyehccqlebl Oprema: 2 postaji, CIP z 2 rezervoarjema, vhodni in izhodni valjčni transporti za KEG, krmilna omara z zaslonom na dotik

Stanje: rabljeno, Leto izdelave: 2001, Kombinierter Entschrauber und Entkorker. Ausgestattet mit 2 Entschraubungs- und einer Entkorkungshaube. Die Maschine wird mit 2 zeitgleich verbauten Hauben betrieben, was 4 Entschraubungs-/Entkorkungsköpfen entspricht. Geschwindigkeit der Kastenbahn: 0,6 m/s Gelhoxbqg Uoccqlsbl Maschine (Zusatz): Entkorker Leistung: 11 kW Pneum, Betriebsdruck: 10 bar Strom: 25 A Spannung: 230/400V, Steuerspannung 24 V Frequenz: 50 Hz Länge: 2900 mm Breite: 1260 mm Höhe: 2000 mm Formate: 0,5 l NRW, 0,5 l Euro, 0,33l Steinie, Schraubverschluss und Kronkorken Bedienung / Steuerung: Simatic S7 Ausstattung: 2 Hauben mit jeweils 2 Köpfen für Schraubverschluss, eine Haube mit 2 Köpfen Kronkorken, Kastentransportband, Kastensperre mit Initiator, Endschalter, Korkenerkennung, Hydraulik, Lichtschranken, Hydraulikventil, Türschalter, Druckluftanschluss, Schaltschrank

Stanje: rabljeno, Leto izdelave: 2017, Filling line for 0.33 L disposable Euro bottles Description: The bottles are manually placed onto a bottle infeed table. From there, they are conveyed by belt to the labelling machine, where a wrap-around self-adhesive label is applied. The bottles then proceed to the combined rinser/filler/capper and the downstream bottle accumulation table, from which the bottles are manually packed into crates or other packaging units. Machine (additional information): Glass bottle filling Nominal output approx.: 3,750 bottles/h Gbjlhowgi Dxeccqlol Formats: 0.33 L Euro bottles and 0.33 L Vichy disposable bottles Running direction: left -> right Operation / Control: Filler: Siemens ET 200 SP, touch panel Layout / Position: free-standing Equipment: Bottle infeed table, labelling machine by Intrex (Model: Intrex Set with wrap-around adhesive labelling), bottle rinser/filler by Leibinger GmbH (Rinser model: 12 BG, Filler model: Multima L (=long tube filler), Control: Siemens S7, year of manufacture: 2019), bottle accumulation table, bottle conveyors

Stanje: rabljeno, Leto izdelave: 2000, Stroj (dodatno): z 24 zapiralnimi glavami Zmogljivost polnilne linije: 5000 steklenic/uro Oprema: elektro omara z upravljalnim panelom, 24 zapiralnih glav Gelhccexbpl Njqlobl

Stanje: rabljeno, Leto izdelave: 2001, PET bottling line by KHS Gbslhcjvu Tufjcqlsl Machine (additional): with de- and palletizing Output at 1 litre: 24,000 bottles/h Formats: 0.5 L and 1 L PET bottles Equipment: depalletizer, air conveyor, rinser, filler incl. height control, mixer, packer, crate washer, palletizer

Stanje: rabljeno, Single-use PET bottling line, comprising the following components: - Crate ejectors (crate emptiers, Gera GmbH, 20 ejector units in a 4x5 arrangement) for 0.5-liter bottles - Crate ejector for 1.0-liter bottles (Gera, 2003) - Crate washer with cleaning nozzles - Stretch blow molding machine (SIG, Blomax 18 model, year 2003, with 18 cavities) - Air conveyor for PET bottles (Convair, 2001) - Extraction system (2003) - Air conveyor (KHS Innoline, 2003) - Premix system (Procomac Starmix CM, 2001, 250 hl/h) with water deaeration, mixer, and carbonation, with a total of 4 tanks - Velcorin dosing system (dmt, Burdomat II G) - Cap applicator and cap conveyor system (Procomac, 2005) - PET bottle rinser, filler, and capper (Procomac, 2001) - Labeling machine (P.E. Futura, 2001) for hotmelt wrap-around labels, in block with laser date marking (Videojet, 2017, with extraction) and label box (2005) - Labeling machine (KHS Roland, 2009) - Best-before date detection unit (2011) - Air knife drying system for bottles (2017) - CIP system (Procomac, 2001) with 3 tanks of 20 hl each - Free, powered conveyors for bottles and crates Machine (Additional info): Single-use bottling Capacity: 16,000 bph Gslhccqoyr N Utjlebl Packing patterns: 0.5-liter single-use PET bottles, 20-bottle crates Equipment: bottle ejector, crate washer, 2 x stretch blow molding machines, premixer, Velcorin dosing, cap handling and conveying, rinser/filler/capper, labeling machine, date marking, packer, best-before date detector, bottle air knife, bottle air conveyor, extraction system, CIP system, free crate and bottle conveying.

Stanje: rabljeno, Leto izdelave: 1997, KEG-naprava Stroj (dodatno): Stroj za notranje izpiranje in polnjenje Moč: 8 kW Napetost: 400 V Gbelhccexbqh Seqlsl Frekvenca: 50 Hz Dolžina: 1400 mm Širina: 1100 mm Višina: 2300 mm Formati: KEG sodi 10–50 l s ploščatim priključkom Upravljanje / Krmiljenje: Upravljalna konzola OP7, Siemens Simatic S5 - 95U Material: nerjaveče jeklo Postavitev / Položaj: prostostoječe Osnovna konstrukcija: konstrukcija iz kvadratnih cevi na kupolastih nogah Oprema: 1 rezervoar za čistilo, električno ogrevan; 1 kombinirana čistilna in polnilna postaja s ploščatim priključkom; 1 črpalka iz nerjavečega jekla; 1 nerjaveča omara za upravljanje Teža: 250 kg

Stanje: rabljeno, Leto izdelave: 1994, kombinirani polnilnik steklenic z etiketirnim strojem "Krones Bloc" Stroj (dodatno): blokiran polnilni in etiketirni stroj Kapaciteta: 7000 steklenic/uro Moč: 38,1 KVA Tok: 55 A Napetost: 230/400 V Frekvenca: 50 Hz Formati: 0,5 l NRW (čelo/prsni/dorzalni), 0,33 l Steinie (čelo/dorzalni), 0,33 l Longneck (čelo/prsni/dorzalni) Smer delovanja: desno -> levo Upravljanje: Siemens S 5 Pozicija: samostoječa Gbelexb Ahwohccqlsl Oprema: zapiralec za kronske zamaške, etiketirni stroj Universella Periferija: inšpekcijska naprava miho

Stanje: rabljeno, Leto izdelave: 2007, Stroj (dodatek): Zapiralec za steklenice z žico Zmogljivost: 18.000 steklenic/uro Gslhccqoxbpdxelobl Oprema: nastavitev višine, nadzorni sistem za pritisk zapiranja, mehansko/pnevmatsko preverjanje napetosti žice, visokotlačna vbrizgalna naprava, izpiranje in spiranje.

Stanje: rabljeno, Leto izdelave: 1991, Machine (additional details): 50,000 bph, crown cork Rated output: 50,000 bottles/hour Formats: 0.33 l longneck, 0.5 l NRW bottles; crown cork Running direction: right to left Operation / Control: Siemens S5 Base design: level-controlled filler with return air tube Gslhevcqr Roccqlebl Equipment: 120 filling stations, 24 capping stations, double pre-evacuation, high-pressure injection

Stanje: rabljeno, Glass bottle filling line for hot filling of smoothies. Consisting of the following components: - Unpacking table Gslhjwgc R Ejccqlsbl - Bottle rinser - Vacuum filler (with 24 filling valves, Nagema, 1984, type "VW 24/1") - Flash pasteurizer - Pressure tank - Capper (Marchesini, type "ML667") - Cap sorter - Tunnel cooler - Blower - Cap inspection (BBull CIS) - Labeller (Anker, 1999, type "Roland 10/4") - Packing table - Conveyors - Control panel - Cooling tower - Steam boiler Machine (additional): Hot filling, with pasteurization Capacity: 5,000 bottles/h Formats: 0.25-litre bottles, twist-off caps Equipment: Unpacking table, rinser, vacuum filler, flash pasteurizer, pressure tank, capper, cap sorter, tunnel cooler, cap blower, cap inspection, labeller, packing table, conveyors, control panel, cooling tower, steam boiler.

Stanje: rabljeno, Leto izdelave: 2019, semi-automatic KEG system Machine (additional specification): Semi-automatic keg filling unit Capacity approx.: 50 KEGs/hour Power consumption: 2.5 kW/h Voltage: 230 V Frequency: 50 - 60 Hz Heating/Cooling: Steam 1.5 - 2 bar, < 125°C Water: 2 - 3 bar, 80°C Compressed air: 5 - 6 bar Length: 860 mm Golhcowgddyscqljbl Width: 760 mm Height: 2530 mm Formats: Combo fitting Ø 75 mm, World KEG fitting Operation / Control: Control cabinet, Siemens 1200, touch panel Material: Stainless steel Design / Position: Free-standing Equipment: 1 filling station with vertically adjustable protective housing, gravity roller conveyors at infeed and outfeed, control cabinet with operator panel, changeover panel for CIP or product inlet Weight: 130 kg

Stanje: rabljeno, Leto izdelave: 2011, Glasflaschen-Abfüllung für 0,33 l Longneck, 0,5 l Euro, Kronkorken, und 0,5 l, 0,75 l Bügelverschlussflaschen bestehend aus: -Waschmaschine Hersteller: Kitzinger Baujahr: 2011 Leistung 1500 - 3000 Fl./h -Flaschenfüller und Kronkorken-Verschliesser mit Langrohr-Füllventilen Hersteller: Markl Baujahr: 2011 -Bügelverschliesser Hersteller: Rico -Etikettiermaschiene Hersteller: Krones / KOSME Baujahr: 2011 -Laserdrucker für Datierung Hersteller: Domino -Flaschensammeltisch Maschine (Zusatz): Abfüllanlage (Langrohr Füller, diverse Flaschenformate, diverse Verschließer) Leistung: 3000 Flaschen/h Formate: 0,33 l Longneck, 0,5 l Euro, Kronkorken, und 0,5 l, 0,75 l Bügelverschlussflaschen Ausstattung: Kitzinger Waschmaschine Leistung 1500 - 3000 Fl./h; Markl Flaschenfüller und Kronkorken-Verschliesser rmit Langrohr-Füllventilen und Bügelverschliesser; Krones/KOSME Etikettiermaschine Domino Laserdrucker für Datierung; Flaschensammeltisch Gelhcsxbnylecqlsbl

Stanje: rabljeno, Bottle filling line with a capacity of 30,000 bottles per hour. Suitable for 0.33l Vichy, 0.33l Euro, 0.35l Frucade, and 0.5l NRW single-use and returnable bottles. The plant is comprised of the following machines/components: - Depalletizing and palletizing system Manufacturer: Radenska & Steinle - Unpacker Manufacturer: SZA Federspiel - New glass depalletizer Manufacturer: Steinle Fördertechnik - Uncorker Manufacturer: Rink - Bottle washer Manufacturer: Krones - Crate washer - Bottle inspector Manufacturer: Krones - Beer warmer Manufacturer: Fischer - Bottle filler Manufacturer: Krones - Crown cap hopper with magnetic conveyor Manufacturer: Gassner - Bottle fill level inspector Manufacturer: Metec - Labeller Manufacturer: Krones/Renner - Label inspection system Manufacturer: Miho Gbolsvu Tt Iohccqljl - Packer Manufacturer: SZA Federspiel - Full crate inspector Manufacturer: Metec - Bottle carrier erecting unit Machine details (additional): Includes depalletizer and palletizer, years of construction 1993 - 2009 Features: Depalletizing and palletizing system, unloader, new glass depalletizer, uncorker, bottle washer, crate washer, bottle inspector, beer warmer, bottle filler, crown cap feeding system, fill level inspection, labeller, label inspection, packer, full crate inspection, bottle carrier erecting unit.

Stanje: rabljeno, Leto izdelave: 2021, Gravimetrično polnilo steklenic s kratko cevjo s 16 polnilnimi ventili in zapiralnikom za kronske zamaške. Upravljanje preko PLC Eaton. Stroj (dodatek): gravimetrično polnjenje in zapiranje s kronskimi zamaški Moč: 4,5 kW Napetost: 380 V Frekvenca: 50 Hz Stisnjen zrak: 14,4 Nm³/h, 5 - 6 bar, priključek 8 mm Gelexbpchshccqlebl Dolžina: 2,30 m Širina: 1,42 m Višina: 2,50 m Formati: Longneck 0,33 l, Vichy 0,33 l, Steinie 0,33 l, Belge 0,75 l - kronski zamašek 26 mm Upravljanje: PLC Eaton Opremljenost: 16 polnilnih ventilov, 1 zapiralna postaja, priključek za pivovod DN32 Teža: 1800 kg

Stanje: rabljeno, Leto izdelave: 1996, Bottle filling line with a capacity of 30,000 bottles per hour. The line is suitable for 0.33L Vichy, 0.33L Ale, and 0.5L NRW one-way and returnable bottles. The system consists of the following machines/components: - Depalletizer Manufacturer: Kettner - New Glass Sweeper Manufacturer: Kettner - Empty Container Inspection Manufacturer: Heuft - Decorker/Unscrewer Manufacturer: Rink - Unpacker Manufacturer: Kettner - Bottle Washer Manufacturer: KHS - Crate Washer Model: KWZ-20 - No. 115 - Empty Bottle Inspector Manufacturer: Heuft - Bottle Filler Manufacturer: KHS - 2 Closure Feeders Manufacturer: Gassner - Bottle Fill Level Inspection Manufacturer: Heuft - Labeller Manufacturer: Krones - Label Inspection Manufacturer: Heuft - Packer Manufacturer: Kettner - Palletizer Manufacturer: Kettner Gbolhccjvu Tthjqlsl - Pallet Strapper Manufacturer: Born - Pallet Stretch Wrapper Manufacturer: Robopac - Pallet Labelling Manufacturer: Weber Marking Systems Machine (specification): Returnable Glass Bottle Filling Line Capacity: 30,000 bottles/hour Formats: 0.33 L Vichy, 0.33 L Ale, and 0.5 L NRW Equipment: Depalletizer; New Glass Sweeper; Empty Container Inspection; Decorker/Unscrewer; Unpacker; Bottle Washer; Crate Washer; Empty Bottle Inspector; Bottle Filler; 2 Closure Feeders; Bottle Fill Level Inspection; Labeller; Label Inspection; Packer; Palletizer; Pallet Strapper; Pallet Stretch Wrapper; Pallet Labelling

Stanje: rabljeno, Bottle filling line for approx. 5,000 bph Machine (details): Returnable glass bottle filling, year of manufacture: 199... Capacity: 5,000 bottles/hour Formats: Euro bottle 0.5 L, Longneck 0.33 L, Swing-top 0.5 L Equipment: Depacker (JOHA Diamant M1), bottle washer (Klinger, 2,000 bph), empty bottle inspector (Heuft Reflexx InLine IR, 2,000 bph), bottle filler and capper (Hormes), swing-top capper (AMS, 1997, 15 heads, 6,000 bph), labelling machine (Gernep, 2,000 bph), packer (JOHA Diamant M1), crate washer, caustic sedimentation tank Gbelsvcqd Tjhccqlsl

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, Na voljo je stroj za polnjenje in zapiranje velikih pločevink JBT FoodTech iz živilske industrije. Teža pločevinke: 750g/1000g, vsebina: sladkano kondenzirano mleko, največja zmogljivost: 600 pločevink/min, polnilne glave: 22, zapiralne glave: 5, izvedba: monoblok, upravljanje: Siemens. Dokumentacija je na voljo. Možen ogled na lokaciji. Goloy N Uv Sjhccqljbl

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1987, Na voljo je popolnoma avtomatski stroj Ferrum za polnjenje in zapiranje pločevink. Teža pločevinke: 397g, vsebina: slajeno kondenzirano mleko, število zapiralnih glav: 6, zmogljivost: ca. 250 pločevink/min, dimenzije stroja (D/Š/V): ca. 2300mm/1550mm/2300mm, teža: ca. 3500kg. Posoda za polnjenje je bila večkrat popravljena. Dokumentacija na voljo. Možen ogled na lokaciji. Predvidoma na voljo od septembra 2026. Gslhoy N Uvxsccqlobl

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, Na voljo je modularni sistem za polnjenje in zapiranje vedra Wittmann Robot Systeme. Sestavni deli: dovod skladov vedra, pretvornik skladov vedra, ločevanje vedra, grablje in polnjenje, ustavljalec, dovod pokrovov, zapiranje, kontrola pokrovov in obračanje za nadaljnje transportne procese. Število formatov: 6, razporeditev formatov okrogli/pravokotni, premer okroglih vedra: 226 mm, višina okroglih vedra: 194 mm, najmanjše dimenzije pravokotnega vedra X/Y/Z: 195 mm/299 mm/170 mm, največje dimenzije pravokotnega vedra X/Y/Z: 302 mm/415 mm/220 mm, prostornina vedra: 5l/6l/10l/11l/16l. Vključuje pripadajoče transportne enote in motorje. Dokumentacija na voljo. Ogled na lokaciji je možen. Gbolhoy N Ddljccqlol

Stanje: novo, Leto izdelave: 2026, EK01 BAGGING MACHINE: Semi-automatic multi-product bagging machine EK01 equipped with a large loading hopper and an adjustable precision scale for setting the desired weight. Gelhccjd Nrh Asqlebl Automatic weighing system with internal conveyor belt. Hopper with medium-wide mouth for easy filling of bulk material. EK01 bagging machine with hopper specifications: - Bagging capacity: 1.5–2 tons/hour - Productivity: up to 2.5 bags per minute (depending on product, bag size, and operator skill) - Hopper capacity: 1.6 m³ - Overall dimensions: W 130 cm x L 250 cm x H 225 cm * (option for lower hopper height available during construction) - Support base on four legs, 100 cm x 100 cm - Total weight: approximately 350 kg - Precision weighing: +/- 100 grams - Programmable scale for desired weight - Option to prepare bags from 1 to 50 kg (according to your requirements) - Adjustable discharge conveyor speed via potentiometer, with final filling phase at reduced speed for increased weighing accuracy - CE declaration of conformity

Stanje: novo, Leto izdelave: 2026, Semi-automatic multi-product bagging station with precision weighing scale. The operator positions the empty bag under the bag holder, and the packaging machine fills it quickly and with maximum precision thanks to the automatic weighing system. The product is withdrawn from the hopper via a conveyor belt driven by a reduction gearbox. Wide-mouth container for easy filling with a mechanical shovel or other system. Side and rear forklift couplings facilitate transport. Gelhccqsd Nqvnoljbl Specification of the ARK01 bagging machine with hopper: - Packaging capacity: 3-4 tons/hour - Hopper capacity: 2 m³ (heaped) - Overall dimensions: L 210 cm x W 260 cm x H 225 cm - Total weight: approx. 400 kg - Accuracy with a tolerance of +/- 100 grams - Capability to prepare bags from 1 to 50 kg* - Wiring for power supply - Manual tilting gate to regulate discharge volume - Vertical inclination scale to adjust the height according to the bags used - Control panel - 400V three-phase power supply - Operating manual - Made in Europe