Navodila Za Uporabo nakup rabljenega (109.161)

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2002, obratovalne ure: 6.889 h, nosilnost: 4.000 kg, dvižna višina: 4.500 mm, vrsta goriva: dizel, tip droga: simpleks, gradbena višina: 3.060 mm, vrsta pogona: Diesel, Večstranski viličar ISO razred: ISO razred 3 = 2.500 - 4.999 kg Dodpfx Afox Nz T Dslskg Tip droga: Standardni Stanje: Pripravljen za uporabo in popolnoma funkcionalen Tehnično stanje: dobro Bočni pomik, nastavljiv razmak vilic, Gretje, polna kabina,

Stanje: dober (rabljeno), Plastične zaboje, večkrat uporabni zabojniki Transportni zaboj, skladiščni zabojnik, komisionirna škatla Barva: modra z nazobčanim pokrovom Mere: pribl. D 600 x Š 400 x V 353 mm 161225ä Dedpepvi Ufsfx Afljkg Na voljo približno 1.000 kosov!

Stanje: novo, dolžina tovornega prostora: 4.100 mm, širina tovornega prostora: 2.050 mm, višina nakladalnega prostora: 500 mm, prostornina tovornega prostora: 4 m³, Leto izdelave: 2025, Nosilnost: 10.000 kg Dkedpfx Afsx I Ddcjlsg

Stanje: rabljeno, Leto izdelave: 2007, Used machine Year of manufacture: 2007 Condition: completely overhauled and refurbished Features and technical data: - Cutting area: 4,200 x 2,100 x 50 mm - CE mark - Full rear enclosure - Scoring unit - Complete with extraction hood and saw blade - Control panel mounted on the saw carriage Dkjdpjwt E Uysfx Afleg - Reinforced 4 kW motor - Equipped with strip cutting device - Flip stops and aluminum center support - Retractable slat support for horizontal cuts Dimensions: approx. 5,250 x 2,700 x 1,350 mm Weight: approx. 750 kg Availability: available at short notice Location: Hesse

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: e.a.100, Polnilni in varilni stroj za enodozna pakiranja s patentiranim sistemom odpiranja. Teža 2874 kg. Napetost 380 V. Tlak 7 bar. Stroj so odklopili in zavarovali strokovnjaki podjetja V-shapes. Dksdpfexr Ai Aex Aflsg

Stanje: rabljeno, Linija za punjenje staklenih boca za pivo i bezalkoholna pića sa kapacitetom od 9000 flaša na sat. Uključuje: - Inspektor praznih flaša: Inex Tip Optiscan 4s - Mašina za punjenje i zatvaranje boca: Krones Tip 28/7, godina proizvodnje 1975, sa 28 ventila za punjenje i 7 stanica za zatvaranje - Zatvarač: Adelski, sa 4 stanice za zatvaranje - Mašina za etiketiranje: Pirzer, godina proizvodnje 1979, za trbušne i vratne etikete, sa 8 stanica za apliciranje etiketa - Transport boca Dodatne informacije o mašini: godine proizvodnje: 1975 - 1979 Kapacitet: 9000 boca/h Formati: 0,5 l euro boca; krunski zatvarač; navojni zatvarač; sanduk za piće 20x0,5 l Oprema: inspektor praznih boca; mašina za punjenje i zatvaranje boca (28 ventila za punjenje i 7 zatvaranja); zatvarač; etiketirka; transport boca. Dkjdow Tmt Aepfx Aflsg

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2019, obratovalne ure: 3.925 h, nosilnost: 8.000 kg, dvižna višina: 4.500 mm, vrsta goriva: električni, tip droga: simpleks, gradbena višina: 3.550 mm, vrsta pogona: Elektro, Večsmerni viličar Tip droga: standard Stanje: pripravljen za uporabo in popolnoma funkcionalen Tehnično stanje: dobro Napetost baterije: 80V Leto izdelave baterije: 2023 Nastavljive vilice, Dksdpsx Ef N Esfx Aflsg Ogrevanje, popolna kabina,

Stanje: pripravljen za uporabo (rabljen), veliko komponent je bilo obnovljenih in prenovljenih Dkedpfx Ajxxb Ukeflsg

Stanje: rabljeno, Hydraulic punch, punching frame for use with JOKA HP-S type punching units Hydraulic hole punch, hydraulic press for punch brackets Year of manufacture: approx. 1995 Press force: 5 tons Throat depth: 155 mm Stroke: approx. 20 mm Punch unit width: max. 54 mm Punch unit installation height: max. 220 mm Die holder: Ø 48 mm Motor power: 1.5 kW Power supply: 230 Volt, 50 Hz - suitable for universal use of JOKA SW 20 or SWD 20 punching units - Throat depth of the punching units can be increased, units can be pushed through to the rear - Stroke release via electric two-hand operation - Hydraulic unit: HAWE, Type HCW 4 / 2.5-B 1/400-1 Dedpfx Afoltrmujlskg - Mounted on mobile frame Space required (L x W x H): 1100 x 800 x 1450 mm Weight: approx. 200 kg Good condition

Stanje: novo, - Zunanje dimenzije (DxŠxV): 644x930x863 mm - Območje uporabe: -18 ÷ -22°C - Temperatura izparevanja: -30°C Ibedcvyexvr Upoqi Asd - Temperatura kondenzacije: +40°C - Temperatura hladilnice: -20°C - Temperatura okolice: 32°C - Odmrzovanje: vroči plin - Napajanje: 230 V / 1+N faza / 50 Hz - Največji izkoristek toka: 13,2 A - Največja absorbirana moč: 2,8 kW - Nazivna absorbirana moč: 110 W - Hladilno sredstvo: R452A - Moč: 1.318 W - Nazivna moč: 1,9 KM - Tip kompresorja: E - Razmik reber: 2,5 mm - Ventilatorji: 1 x ø300 mm - Pretok zraka: 1.000 m³/h - Dolet zraka: 6 m - Masa: 89 kg - Prostornina: 0,80 m³ - Hermetični kompresor Djdpfx Aexvr Upsflokg - Kondenzator hlajen z zrakom - Ohišje iz pocinkane pločevine - Samodejno ponastavljalo visokotlačno in nizkotlačno stikalo - Aksialni ventilator - Solenoidni ventil za odmrzovanje z vročim plinom - Lovilnik kondenzata - Grelec za odvod kondenzata (samo BT modeli) - Senzor temperature okolice - Senzor za konec odmrzovanja - Senzor za kontrolo kondenzacije - Napajalni kabel za grelec vrat - Kabel za priklop mikro stikala - Digitalni zaslon z indikacijo temperature - Prikaz obratovalnega stanja: - Hlajenje/odmrzovanje - Ventilatorji izparilnika - Aktivni alarm - Programske tipke - Ročni gumb za odmrzovanje - Zvočni alarm - Alarm za nizko in visoko temperaturo - Alarm za visoko temperaturo kondenzatorja (onesnažen kondenzator) - Alarm za nizko temperaturo kondenzatorja - Alarm odprtih vrat - Alarm za visok in nizek tlak - Alarm pri prekoračitvi časa konca odmrzovanja - Alarm za napako senzorja temperature - Alarm za napako senzorja kontrole kondenzacije - Temperatura izparevanja pri -10°C za pozitivne temperature (TN) - Temperatura kondenzacije pri +40°C za TN - Temperatura izparevanja pri -30°C za nizkotemperaturno področje (BT) - Temperatura kondenzacije pri +40°C za BT Oglas je bil preveden samodejno. Možne so napake v prevodu.

Stanje: rabljeno, Leto izdelave: 2007, Overview The offered filling line for returnable glass bottles comprises a selection of high-quality machines, carefully chosen by BEVMAQ. Most of the machines were previously used in German breweries. The machines are in good condition, having been regularly serviced and maintained. With the exception of a few, most machines were dismantled by a German partner company and are now stored in a warehouse. The line layout can be customized to meet the client's requirements and factory layout, as the conveyors are either new or refurbished. Dkjdexf D Dbspfx Afleg Technical Data - Capacity: 40,000 bph (0.5 l bottles) - Suitable for: Carbonated water and soft drinks, beer/beer mix - Recently serviced, regularly maintained - Processed formats: 330 ml, 500 ml - Year of Manufacture: 2007 to 2016 Line Details - Crate Depalletizer | Krones | Pressant Duplex | 2011 Includes safety fences, conveyor belts, discharge table - Packer/Unpacker | Krones | Linapac II | 2012 Machine can operate as either packer or unpacker - Bottle Washer | Krones | Lavatec | 2013 - Crate Washer | Klotzki | 2011 - Empty Bottle Inspector | Miho | David 2 | 2016 - Counterpressure Filler + Capper | KHS | Innofill DRS | 2013 - Fill Level Inspector | KHS | 2013 Includes bottle rejection system and transport conveyor - Tunnel Pasteurizer | Krones | Linaflex | 2013 - Cold Glue Labeller | Krones | Topmodul | 2015 Includes module prepared for working with seal labels With servo-controlled bottle orientation - Packer | Krones | Smartpack | 2011 - Palletizer | Transpak | NEW - Pallet Strapping Machine | Born | – | NEW - Mixer | Famix | 30,000 – 2K | 2008 - Flash Pasteurizer | GEA | 25,000 | 2007 All pallet, crate, or bottle conveyors are custom-adapted to the line design and are built to KHS/Krones standards. Required format parts for bottle, label, crate, and closure handling can be supplied as well.

Stanje: rabljeno, Linija za polnjenje steklenic za cca 5.000 steklenic/uro Dkedpfx Afew S Tqfjlog Stroj (dodatno): letniki 1990–2016 Zmogljivost: 5.000 steklenic/uro Formati: Euro steklenica 0,5 l, longneck 0,33 l, steklenica s kovinsko zaponko 0,5 l Oprema: inšpektor praznih steklenic (Heuft Reflexx InLine IR, 2016, 8.000 steklenic/uro), polnilni in zapiralni stroj za steklenice (Hormes), zapiralec zaponk (AMS, 1997, 15 zapiralnih glav, 6.000 steklenic/uro), etiketirka (Gernep, 2014, 9.000 steklenic/uro), transportna linija za steklenice

Leto izdelave: 2025, Stanje: novo, Izkoristite naše hidravlične module z integriranim zalogovnikom – popolna rešitev za sodobne sistem hladne vode. Centralni zalogovnik omogoča stabilno delovanje sistema, zmanjšanje tlačnih nihanj in izboljšano razpoložljivost vaše naprave. Primer izvedbe: Djdpehtfhasfx Aflokg Hidravlični modul s 5000-litrskim zalogovnikom Integrirana dvojna črpalka za redundantno delovanje ali povečano kapaciteto pretoka Hidravlično ločevanje med primarnim in sekundarnim krogom Natančen nadzor tlaka in temperature za optimizacijo skupne učinkovitosti Prostorsko varčna zasnova ohišja za enostavno integracijo v obstoječi proces. Z veseljem vam pripravimo individualno ponudbo z dimenzioniranjem in dobavnim rokom.

Stanje: pripravljen za uporabo (rabljen), "Ostelagringsreoler" eller "ostemodningsreoler". Disse betegnelser refererer til specialreoler, der bruges til at lagre ost, mens den modnes eller lagres under kontrollerede forhold. Reolerne er fremstillet af et særligt hårdt fødevaregodkendt materiale. Mål: 1900 x 900 x 1700 mm Kan stables. Djdpotmthnsfx Afljkg

Stanje: novo, Features > 5-axis simultaneous CNC machine > Base frame made from polymer concrete > Wet and dry machining > Workpiece zero-point clamping system > Servo drives with absolute encoders Dodpfx Ajhqhkieflokg > Integrated control with touchscreen Options > Machine base frame > Various zero-point clamping devices: T-slot plate, 4-jaw chuck, precision vise, and blank holder > Automated loading system > 3D measuring probe > Why buy? Easy financing available. Contact us! The iMG 1010 is a compact solution for machining workpieces up to 100x100x100 mm. With its polymer concrete base frame, it enables precise machining of a wide range of materials such as titanium, steel, CoCr, ceramics, sapphire, zirconium, or aluminum. Notably, the Y-axis arrangement ensures high stability and outstanding vibration damping due to its installation position. Nearly all positions on the workpiece can be reached without reclamping. The variety of workpiece clamping devices and holders, in combination with the zero-point clamping system, make this machine a versatile machining center. Its design allows for both wet and dry machining without the need for time-consuming conversions. The CNC machine can be expanded with an optional automated loading and unloading system, which can access the machining area from the right, left, or above. This enables automated workpiece changes. The zero-point clamping system serves as an interface and ensures the precise and repeatable positioning of the workpiece. With software interfaces, the system can be integrated into networked, automated production processes. The maintenance-friendly design and durable direct-drive spindles reduce service costs and downtime, offering a reliable machining platform. The construction was designed to ensure that all elements are easily accessible yet well protected from external influences, guaranteeing a long service life. The advanced system offers numerous possibilities for expansion.

Stanje: rabljeno, Frame punch - swing frame punch - flatbed die cutter - platen punch - eccentric press Punch + feeder for use with band knife die cutting tools Flatbed die cutter HELMERDING Type PSH 25 Order No. EP 97784 Machine No. 6073 Year of manufacture 1998 Pressing force 25 tons Clearance between tie rods 700 mm Table area = installation space 800 x 670 mm Table area = installation frame width 510 x depth 440 mm, plate thickness 20 mm Ram area 800 x 670 mm Drop-through hole in the table 490 x 420 mm Ram stroke 45 mm Ram adjustment range 10 mm Installation height = tool height 100 mm Strokes per minute up to 250 strokes/min Motor power 15 kW Power supply 400 Volt, 50 Hz - controlled drive for infinitely variable stroke rate - pneumatic clutch-brake combination - ram counterbalance cylinder - automatic central lubrication system VOGEL - heavy-duty base plate with 4 vibration dampers beneath the machine Required space L x W x H approx. 3000 x 2000 x 3000 mm Weight 4.5 tons Good condition Dodpfx Afjdzqmzelekg Previously, the machine was used for punching cardboard blanks. Ideal for punching non-woven fabrics or similar materials for respiratory masks.

Stanje: skoraj kot novo (rabljeno), water-cooled spot welding unit, mobile Rated power at 50% duty cycle: 100 kVA Secondary short-circuit current: 9.5 kA Secondary open-circuit voltage: 14-18 V with secondary cable for spot welding gun and counter electrode, 3000 mm long Synchronous welding controller with pulse mode T-1050 / 8 Djdpfehlhh Asx Aflekg Main switch Weight: 300 kg

Stanje: rabljeno, Leto izdelave: 2017, Filling line for 0.33 L disposable Euro bottles Description: The bottles are manually placed onto a bottle infeed table. From there, they are conveyed by belt to the labelling machine, where a wrap-around self-adhesive label is applied. The bottles then proceed to the combined rinser/filler/capper and the downstream bottle accumulation table, from which the bottles are manually packed into crates or other packaging units. Machine (additional information): Glass bottle filling Djdpfjwgi Dxox Afljkg Nominal output approx.: 3,750 bottles/h Formats: 0.33 L Euro bottles and 0.33 L Vichy disposable bottles Running direction: left -> right Operation / Control: Filler: Siemens ET 200 SP, touch panel Layout / Position: free-standing Equipment: Bottle infeed table, labelling machine by Intrex (Model: Intrex Set with wrap-around adhesive labelling), bottle rinser/filler by Leibinger GmbH (Rinser model: 12 BG, Filler model: Multima L (=long tube filler), Control: Siemens S7, year of manufacture: 2019), bottle accumulation table, bottle conveyors

Stanje: novo, Leto izdelave: 2025, Model: CT Delovno območje: 3048 mm × 1524 mm Izhodna moč laserja: 6000 W / 3000 W / 2000 W / 1500 W Natančnost pozicioniranja: ±0,05 mm Natančnost ponovnega pozicioniranja: ±0,03 mm Največja hitrost povezave: 100 m/min Največje pospeševanje: 1G 1. Dvojne hitro izmenljive mize Hitro menjavanje dveh miz občutno poveča učinkovitost. Pogon z verigo nudi večjo togost in višjo natančnost, kar skrajšuje čas podajanja materiala. 2. Varjena postelja z utorom in čepom Uporaba tradicionalne kitajske konstrukcije utor-čep zagotavlja večjo nosilnost. Fiksiranje z varom in konstrukcijska nosilnost zagotavljata dolgo in stabilno delovanje. Varjena struktura izboljšuje absorpcijo vibracij, zmanjšuje odstopanja zaradi tresljajev in omogoča bolj natančno rezanje. 3. Dvojne električne kartuše z avtomatskim centriranjem Dve električni kartuši z avtomatsko centrirno funkcijo sta enostavni za upravljanje in zahtevata minimalno vzdrževanje. Popolnoma nov motor omogoča natančen nadzor. Modularni sestavni deli kartuš so lastne razvojne zasnove in jih je mogoče hitro zamenjati. Dkedpog I H Iyefx Aflog 4. Avtomatska funkcija ostrenja laserske glave Z ločenim nastavljanjem gorišča za prebijanje in rezanje je rezanje bolj natančno. Primerna za več goriščnih razdalj; položaj fokusa se samodejno prilagaja glede na debelino posameznih pločevin.

Stanje: rabljeno, Leto izdelave: 2002, Overview This complete PET bottling line was manufactured between 1999 and 2007 by Krones (Germany) and other European suppliers. It is currently still in operation and is used for filling carbonated water and soft drinks into 1.5-liter PET bottles. The line offers a production capacity of up to 16,000 bottles per hour. It has been regularly maintained and is in good condition. Availability: End of August 2025. Technical Data Output: up to 16,000 bottles per hour (based on 1.5L PET bottles) Formats: 1.5L PET bottles (short-neck and cap) Bottle material: PET Filler type: Isobaric filler Year of construction: between 1999 and 2007 (various machines) Closure type: Short-neck Label type: OPP (Contiroll) Dkjdpfx Afowzvl Sslog Scope of Supply 1 x Blowing machine CONTIFORM S16 | Krones | 2002 | incl. preform hopper & cooler Air conveyors from blowing machine to labeller & filler 1 x Labeller CONTIROLL | Krones | 2000 1 x Tribloc 77/88/11 MECAFILL isobaric filler | Krones | 2002 | incl. metal detector 1 x Mixer for carbonated water and soft drinks | approx. 2000 1 x Inkjet printer HITACHI RXS Conveyors between filler and shrink tunnel 1 x Shrink tunnel VARIOPAC | Krones | 2007 | 45 packs/min 1 x Handle applicator TWIN PACK MDE INOX | 2003 | single lane, 45 packs/min Package transport to palletizer 1 x Palletizer KETTNER KR51112 Pressant Universal | 1999 Pallet magazine with lift and transport 1 x Pallet stretch wrapper ROBOPAC GENESIS | 2002

Stanje: rabljeno, Leto izdelave: 2000, Overview This complete PET bottling line was manufactured between 2000 and 2012 by renowned European manufacturers. The line is suitable for both still and carbonated soft drinks and includes a stretch blow molding machine with compressed air generator, rinser/filler/capper, labeller, packer, palletizer, wrapper, conveyor belts, inspection systems, mixing and CIP unit. The line achieves an output of up to 8,000 bottles/h at 1.5 l and is immediately available. All machines are well maintained and equipped with original components and corresponding peripherals. Technical Data - Capacity: 8,000 bottles/h (1.5 l) - Formats: 0.5 l and 1.5 l bottles - Filling products: water and carbonated soft drinks - Closure system: plastic screw caps, sport caps - Packaging: Shrink wrapping; 3x2 formation for 0.5 l and 1.5 l PET bottles - Pallet types: Euro (1,200 x 800 mm), Düsseldorf (600 x 800 mm) Scope of delivery - Stretch blow molding machine: SIPA, year 2002 - Compressed air generator: Kaeser, year 2002 - Rinser/Filler/Capper: Procomac, year 2000 - Number of spraying nozzles: 24 - Number of filling valves: 24 - Number of capping heads: 6 - Labeller: Futura, year 2000 - For wrap-around labelling using hotmelt glue - Inspection system: Logics & Controls, year 2000 - For fill level, cap, and label inspection - Shrink wrapping machine: Krones TFS Variopack, year 2001 - Handle applicator: Twinpack, year 2001 - Tray labeller: Logopack, year 2001 - Pallet wrapper: Born, year 2001 - Palletizing system: Levanti / Profipack - CIP system: Corosys, year 2012 - CO2 degassing unit: Corosys, year 2012 Dkedpewq Sfgsfx Aflsg

Stanje: rabljeno, Leto izdelave: 2020, Overview This complete bottling line was most recently used for filling spirits and includes a rinser-filler combination with a T-cork capper, conveyors, a carton erector, and a carton sealer. The system achieves a maximum output of 2,000 bottles per hour, depending on bottle volume and product. As production volumes increased, the seller has installed a new plant with higher capacity. To present the system in good condition, it has been installed in the warehouse by the seller. Technical Details Output: 2,000 bottles/hour Various bottle shapes are possible, as height and width are adjustable Bottle volumes from 0.5L to 3.0L are possible Last used for: spirits, but can also be used for other liquids Scope of supply Project AE PRORINS2000 linear rinser with a speed of up to 2,000 bph (2020) Project AE PROFILL2000 linear filler with 10 electronically controlled filling valves (2021) Borelli T-cork capper Conveyors Lantech C-300 carton erector (2021) Lantech CS-300 carton sealer (2021) Dkodpjwqpkasfx Afleg

Stanje: rabljeno, Leto izdelave: 2016, Overview  This complete glass bottle filling line is part of a brewery and is used for filling beer into 330 ml glass bottles with crown caps. The line comprises an automatic depalletizer for new bottles, a self-adhesive labeller, a filling triblock, and a carton packer. The entire system was installed in 2017 by Italian manufacturer Framax. The plant is still operational and can be inspected in person. All equipment remains installed and can be viewed during production. Technical details  Production capacity: 2,400 bph (at 0.33l) Last used formats: 0.33l Bottle diameter: 60mm, height adjustable 26mm crown cap Packaging: 6x4 carton Delivery scope Automatic bottle depalletizer | Framax | DEPAL SS-3000 | 2017 Automatic removal of layer pads Photoelectric sensors Self-adhesive labeller | Framax | RLA-H06-S3-L3-D480 | 2016 Three stations for three labels (front, back, neck) Date/batch code printer Counterpressure filler | Framax | Modulblock RFCI-16/16/1-DPS/C | 2016 Rated output: 3,000 bph 16 rinsing positions 16 filling positions Single-head capping unit for crown caps with cap feed system Double CO2 air evacuation Water spray system before capping to reduce residual oxygen Automatic carton packer | Framax | CP-0700-1T | 2017  Carton erector and packer With carton sealing machine Accessories such as conveyors, cooling, pumps Dkjdpfott Um Rex Afleg

Stanje: rabljeno, Leto izdelave: 2000, Overview This complete PET filling line was manufactured between 2000 and 2012 by a group of renowned European manufacturers, including SIG Corpoplast, KHS, Sacmi, Kisters, Paxona, and others. The line is suitable for still and carbonated soft drinks and includes a blow molder, filler, labeller, packaging machine, as well as various conveying and inspection systems. The plant achieves an output of up to 36,000 bottles/h for 1.5 L and is immediately available. All machines are well maintained and come with original components and corresponding peripheral equipment. Technical Data - Capacity: 36,000 bottles/h at 1.5L water; 35,000 bottles/h at 1.5L soft drinks (sweetened); 32,000 bottles/h at 1.5L light soft drinks - Formats: 0.5L and 1.5L bottles - Closure: PCO 28-1881 - Filling products: water and carbonated soft drinks (7.5g CO₂) - Closure system: Screw caps, feeding via chute and tipper (Zalkin + NSM) - Packaging: Shrink film, 3x2 bottles (dual lane) - Pallet types: Euro (1,200 x 800 mm), Düsseldorf (600 x 800 mm) - Electrical data: 400 V / 50 Hz - Controls: ABB, Siemens - Operating direction: standard Scope of Supply - Stretch blow molder: SIG Corpoplast Blomax 24, year 2008; 24 stations; heater with 20 boxes, ABB control incl. preform tipper MD3, preform hopper SBT, elevator HFT, conveyor RGTD, chute ASTK - Air conveyor: NTS Mistral, year 2000, pneumatically adjustable rails, basket cable duct - Filler: KHS Innofill EV-VF, year 2000; 176 electronic filling valves, valve cluster (APV), air conveyor, infeed screw, starwheel holder, screw capper (Zalkin, 22 heads), cap feed system (NSM), foam cleaning (ECOLAB, 2001), dosing units (2011) - Mixer/deaeration: KHS Innopro DX65 Contimix 65/5-T20, year 2000; 65,000 l/h, 5 components, Brix meter (Anton Paar), Hilge pumps - Labeller: Sacmi Opera 300 RF 26T/R S1E1, year 2012; 26 plates, hotmelt, wrap-around, roll feed, parallel feed, safety lift version Dkedpfx Afjwh U Avjleg - Inspection & coding: Fill level and closure inspection: KHS Innocheck CUB Vision Circle, year 2013; bottle laser coding: Videojet with enclosure; pack inspection: KHS Innocheck CUB, year 2015 - Packaging machine: Kisters SP060V, year 2000; shrink wrapper 3x2 (dual lane), 60 cycles/min, manual lane width adjustment, film only - Conveyors & pack labelling: Bottle conveyor: KHS Innoline BTR, year 2000, plastic chain, dry lubrication; pack conveyor: Paxona + Schaefer, year 2009; pack labeller: Contact 100, self-adhesive label from roll

Stanje: rabljeno, Leto izdelave: 2011, Overview  This complete filling line was designed for NRW and Euro bottles, crates, and pallets and offers a capacity of up to 7,500 bottles per hour. The machines are from various years of manufacture between 1992 and 2022, with low operating hours. The line will remain in operation until the end of May and can be inspected in person. Technical Specifications  Capacity: Up to 7,500 bottles/hour Processed bottle sizes: 0.33L & 0.5L (NRW, Euro, Ale) Processed crate formats: NRW and Euro crates Scope of Delivery  Depalletizer & Palletizer | Flema | Star C-LC | 1996 (500 crates/h) Crate Unpacker | RICO | UNO 1-Head 124 | 2010 (350 crates/h) Bottle Unscrewer/Uncorker | ADELSKI | PPE 2005 | 1995 (2,000–12,500 bph, 8,500 operating hours) Bottle Washer | PAC | CB 14-0.5l-R-7 LII Compact | 1998 (7,500 bph, 14,175 operating hours) Bottle Inspector | SYSCONA | LC 10 FD | 2007 (Lye control & metal detection) Filler | ICS | multiFILL-VST (EP) 960-24-240-6KK-6SV-125.6 | 2011 (6,000 bph, 7,200 operating hours) Labeller | ANKER | Roland 8/3 | 1998 (7,000 bph, 14,500 operating hours) Inkjet Printer | Keyence | MK-G1000 | 2022 (currently configured for date marking on the ANKER Roland 8/3 labeller) Crate Packer | RICO | UNO 1-Head L-Machine | 2012 (300 crates/h) Premixer | Jakü | PM-E-30-2k | 1992 (35 hl/h, degassing & carbonation) Crate Washer | RICO | 2500 1-Bath | 2012 (600 crates/h) CIP Tank | - | - | 2012 (2 x 6 hl, steam-heated) Dsdpfov Icubjx Afljkg