Stroji za globoko vrtanje nakup rabljenega (64)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 106882-11, skupna dolžina: 4.400 mm, skupna širina: 1.700 mm, skupna višina: 2.700 mm, skupna masa: 7.000 kg, The drilling method of the deep hole drilling machine is the single-lip drilling process. Drilling unit information: - Drilling depth: 200 mm - Min./max. drilling diameter: 1–12 mm based on ST 60 - Number of spindles: 2 - Spindle center distance: 200 mm - Spindle drive: 2 x 2.4/4.2 kW - Spindle speed, stepless: 1,000 – 20,000 rpm - Feed rate, stepless: 10 – 25,000 mm/min - Rapid traverse: 25,000 mm/min - Slide travel (nominal): 650 mm - Slide width: 460 mm - X-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min - Y-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min Fluid information: - Coolant supply: deep-hole drilling oil - Tank capacity: 500 liters - 1x automatic filter, filter capacity: 50 l/min - 1x control filter - 2x ELB drilling oil supply - 1x flow divider - 1x air cooler with circulation pump - 1x electrostatic oil mist extraction - 1x scraper belt chip conveyor - 1x hydraulic and pneumatic power unit/system - 1x sump pump - 3x submersible pumps - 1x radial piston pump with remote adjustment: Delivery rate: 1–38 l/min Pump drive: 7.5 kW Spindle unit: - Motor spindles with frequency-controlled stepless speed adjustment - Spindle head with connection for tool holder - 2 x tool holder for setting sleeves to VDI 3208 SE10x60, screwed onto the spindle head of the motor spindle Guide bush carrier: Gjdewh Rp Eepfx Adkobr - The guide bush carrier is referenced via the NC axis - Cast design, mounted on linear guides - Drive for W-axis using AC servo motor and ball screw with indirect, absolute position measuring system Workpiece carriage: - The workpiece carriage is designed as a cross-slide for vertical and horizontal positioning of the workpiece, for mounting fixture plates or special clamping devices - Base body in cast design with linear roller guides - Drive for X and Y axes by AC servo motors and ball screws - Direct, absolute position measuring systems. Clamping/radial slot on table plate Clamping table with NC rotary table for positioning: - With rotary and swivel axes - Hydraulic clamping on both rotary and swivel axes Technical data: - Swivel range: 270° - Rotary range: 360° - Center height: 25 ± 0.02 - Spindle distance: 200 ± 0.005 - Indexing accuracy: rotary axis ± 15" / swivel axis ± 30" Electrical equipment information: - 1x drilling process monitoring - 1x CNC control 840D (Solution Line) Connection data: - Operating voltage: 3AC 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 25 kW Machine auxiliary equipment: - 2 x holder for spring-loaded guide bush, arranged on the guide bush carrier - For max. drilling diameter Ø 18 mm

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 106341-11, Leto izdelave: 2005, skupna masa: 8.000 kg, skupna višina: 2.700 mm, skupna dolžina: 5.660 mm, skupna širina: 3.956 mm, The drilling method used by the deep hole drilling machine is single-lip drilling. Drilling unit information: - Number of spindles: 1 - Continuously variable spindle speed: 300 - 8000 rpm - Spindle drive power: 7.5 kW - Maximum drilling depth: 800 mm - Minimum/maximum drilling diameter: 3 - 25 mm (based on ST 60) - Maximum spiral drilling: 25 mm - Maximum tapping: M24x3 - Milling material removal rate: 150 cc/min Travel distances: - X-axis travel: 800 mm - Y-axis travel: 400 mm - Z-axis travel: 630 mm - W-axis travel: 800 mm Traverse speeds: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Coolant system information: - Deep-hole drilling oil as coolant - Tank capacity: 800 litres - 1x scraper belt swarf conveyor - 1x hydraulic power unit and pneumatic system/equipment - 1x submersible pump: Pump capacity: 200 l/min - 1x low-pressure pump: Pump capacity: 100 l/min Pump drive: 1.7 kW - 1x compact belt filter: Filtration capacity: 120 l/min For use with: steel/non-ferrous materials Gbjdpfx Adjw E H E Rekor - 1x radial piston pump with remote adjustment: Delivery rate: 2 - 94 l/min Pump drive: 7.5 kW Spindle unit: - Cartridge-type spindle with drive housing and gear-driven spindle drive. Spindle bearings are precision angular contact ball bearings with lifetime grease lubrication. Milling and drilling spindle unit: - For conventional machining - Spindle head with HSK 50 tool holder Drill bush carrier: - Version as a 2-position turret with electric swivel mechanism - Positioning via Hirth coupling - Turret head equipped for: - Tool guides for deep hole drilling - Milling and drilling spindle unit for conventional machining Pickup tool changer: - For conventional tools and drill bushes - Disc-type magazine with 20 positions including pick-up stroke Automatic tool changer for deep hole drilling tools: - Fixed ELB column magazine for at least 5 tools, including automatic tool clamping for HSK holders Clamping table with W-axis and NC rotary table: - Length/width: 800x600 mm - Positioning accuracy: B-axis +/- 30 seconds - Load capacity (centrally): 1500 daN Workpiece clamping device: - 1x tailstock with manually operated clamping - 1x NC dividing head (A-axis) with manually operated two-jaw chuck for workpiece clamping - 1x base plate for mounting and clamping drill bushes + support prisms Electrical equipment information: - 1x CNC control Sinumerik 840D (digital complete system), including PLC S7-300 Connection data: - Operating voltage: 3-phase 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 25 kW

Stanje: dober (rabljeno), Orodja, svedri bodo prispeli brez omare za orodje. Gjdpfxezd D N Is Adksbr Voziček za orodje z držali za orodje bo priložen.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: M01.16.21.51.02, potovalna razdalja osi X: 1.600 mm, pomik osi Y: 1.200 mm, pomik po osi Z: 500 mm, največja hitrost vretena: 10.000 obr/min, Brez najnižje cene – zagotovljen prodaja po najvišji ponudbi! TEHNIČNE PODROBNOSTI Pot osi X: 1.600 mm Gbsdeznkpvspfx Adksr Pot osi Y: 1.200 mm Pot osi Z: 500 mm Pot osi W: 1.200 mm Pot osi B: 360° Število vrtljajev vretena: 10.000 vrt/min Moč motorja vretena: 30 kW Pogon za pomik: brezkrtačni servo motorji izmeničnega toka Hitrost pomika: 0–20.000 mm/min Hitri pomik osi X: 20.000 mm/min Hitri pomik osi Y in Z: 20.000 mm/min Ročni način: 20.000 mm/min Način za nastavitev: 0–2.000 mm/min Velikost mize: 1.500 × 1.500 mm T-žlebovi: 5 × DIN 650-22 H12 Razdalja med T-žlebovi: 150 mm PODROBNOSTI O STROJU Napetost orodja: hidravlična Električna priključitev: 400 V Frekvenca: 50 Hz Delovni tlak stisnjenega zraka: 6 bar Nazivni pretok: 7.000 vrt/min

Stanje: zelo dobro (rabljeno), Drilling depth: 500 mm Spindle speed: 1 O F F E R We can offer you, subject to prior sale and errors excepted, the following from our stock, without obligation: DEGEN Universal Deep Hole Drilling Machine Model: UTB 500-2 Year of manufacture: - _____ Drilling depth: 650 mm Drilling diameter with twist drill: 16 mm Drilling diameter with single-lip drill: 25 mm Spindle taper: SK40 Infinitely variable feed: 0–120 mm Rapid traverse: rpm Drilling unit vertically adjustable: 250 mm Table dimensions: 570 x 1000 mm 4 T-slots, 14 mm T-slot spacing: 90 mm Table load capacity: 1000 kg Transverse table travel: 460 mm Table swivels: 360° Weight approx.: 1,600 kg Accessories / Special Equipment: • Compact design on a robust base • Deep hole drilling up to 500 mm length possible—ideal for extended drilling in metal Gedpfjxx A D Tox Adksbr • The machine is equipped with a coolant system • Optionally with cross-slide feed unit • Features an RSF Elektronik digital display, type Z 502, for X and Y axes, with 0.01 mm resolution • A solid solution for workshops requiring deep, straight bore holes—not intended for very large diameters or complex machining tasks • The Degen UTB 500 has been extensively modernised—with Lenze feed drive, overhauled Y-axis, new glass scale encoder, newly mounted spindle, and new gas pressure spring—offering reliable precision and high performance Condition: good to very good – ready for demonstration under power A video of the machine is available here (please click on the link): UTB 500/4 Delivery: ex stock—as inspected Payment: strictly net—on receipt of invoice We look forward to your order. We also have further tool grinding machines in stock—please enquire!

Stanje: rabljeno, Leto izdelave: 1965, Core drilling diameter - max. 50 mm Drilling depth 2000 mm Swing diameter mm Drilling diameter max. 110 mm Total power requirement 30 kW Machine weight approx. 10 t Year of manufacture: 1965 Overhauled: 2000 Drilling Ø - Solid drilling approx. 2 - 50 mm - Boring out approx. 100 mm Drilling depth max. 1,600/possibly up to 2,000 mm (see stroke/installation length) Stroke of drilling carriage approx. 4,000 mm Distance between the two spindle heads 5,000 mm Center height above guideway 350/450 mm Feed rate of the drilling carriage, stepless: 20 - 200 mm/min Rapid traverse of the drilling carriage: 2,500 mm/min Workpiece speeds via belt pulley: 260 - 650/650-1625 RPM Main spindle drive 24 kW Coolant pump drives: 1 x 7.5/15 kW - 1 x 15/28 kW Total drive approx. 60 kW 380 V - 50 Hz Total length of machine/guideways 7500/5000 mm Total weight approx. 10,000 kg Accessories / Special equipment: Godpfet Hwucox Adkobr "Machine consists of the following elements: The main spindle on the left, followed by a BOZA, table group driven by ball screw spindle, BOZA with increased center height, and at the end a spindle head of the B 16 series with drive motor approx. 7.5 kW n = 900/2400 and 2400/6000; very large and elaborate coolant system with filtration unit, extensive accessories and drilling tools up to 100 mm Ø. " Suitable for rotating workpiece/fixed drilling tool/ELB and BTA processes, as well as for stationary workpiece and rotating drilling tool. Can operate with internal oil supply (ELB) as well as external oil supply (BTA). " Complete coolant oil system with tank and filter, 2 high-pressure pumps by SIG, adjustable flow rate/min = 17/40/120 or 220/500 l/min. Capacity approx. 2,500 l. " Feed of the main carriage via ball screw spindle and steplessly controllable DC motor; currently, a cross-adjustable table approx. 500 mm, size approx. 800 x 800 mm, is mounted for clamping cubic and cylindrical workpieces. Electrical control via cam track approx. 2,500 mm and limit switches for rapid traverse, feed, and return. " 2 closed 3-point steady rests, FORKHARDT 3-jaw manual chuck approx. 315 mm Ø, " Modernized control panel with speed display, feed setting and display, kW display, feed/rapid traverse switch (forward/reverse), etc. " 2 separate control cabinets, separate BOZA, sleeves, reducers, clamping aids, etc. Condition: good - soon ready for demonstration, machine is very valuable due to accessories Delivery: ex stock - as inspected Payment: strictly net - upon receipt of invoice Further deep hole drilling machines constantly in stock - please contact us.

Stanje: rabljeno, Leto izdelave: 1985, Core drilling diameter - max. 18 mm Drilling depth 320 mm Swing diameter mm Total power requirement 33 kW Machine weight approx. 6 t Space requirement approx. m GILDEMEISTER & KNOLL / TBT Horizontal 2-spindle deep hole drilling machine Model 2 M 01-2-320 Year of manufacture 1985 / 1999 retrofitted and modernized by TBT Drilling - solid drilling approx. 1 - 18 mm Drilling - reaming approx. 25 mm Drilling depth 320 mm Centre height over bed/table 150 mm Stroke of drilling slide max. approx. 500 mm Stroke of positioning slide (linear guides) 500 mm Spindle distance 125 mm Drilling feed/rapid traverse stepless approx. 35 - 1,000/7,000 mm/min Centre distance between spindles approx. 125 mm Spindle speeds FORTUNA HF spindle up to max. 24,000 rpm (800Hz) Total drive of the complete machine approx. 33 kW - 400 V - 50 Hz Weight approx. 6,000 kg Accessories / Special equipment: - Machine currently set up for high-precision drilling of injection pump components (approx. Ø 25 x 150 mm, bore approx. 5 mm) which are fed via an inclined conveyor into a dual-orientation station, positionally checked, and then automatically and in pairs clamped in the machining zone between drill bushing carrier and powered tailstock via a loading portal (with 2 x double grippers) mounted transversely to the machine. After machining, the second set of grippers transfers the workpieces to a blow-off and drill breakage inspection station. After successful inspection, the workpieces fall into transport containers. - Sequence programming and monitoring via SIEMENS OP 17 PLC control. - 2 cooled and oil mist lubricated high-frequency spindles, make FORTUNA, approx. 2/3.5 kW power - Drilling slide feed via GS motor and ball screw - Separate drilling oil unit, approx. 1,500 litres, with various pumps and a sophisticated band filter cleaning system - Separate hydraulic unit approx. 10 kW - Separate BKW cooling unit for spindle and hydraulic oil cooling - 2 separate control and switch cabinets, CE marked Condition: Good to very good - ready for demonstration soon Delivery: Ex stock - as inspected Godpot Hwvajfx Adkjbr Payment: strictly net - upon receipt of invoice

Stanje: rabljeno, Leto izdelave: 1996, Core drilling diameter – max. 25 mm Drilling depth 1000 mm Swing diameter mm Total power requirement 25 kW Machine weight approx. 12.5 t Space requirements approx. m T B T CNC-controlled horizontal deep hole drilling machine Type BWP 250 Year of manufacture 1996, mechanically and electrically overhauled in 2006 _____ Working area: X-axis = Drilling carriage column approx. 2,000 mm Z-axis = Drilling carriage stroke approx. 1,200 mm Drilling depth with 2 steady rests approx. 1,000 mm Y-axis = Drilling carriage vertical stroke approx. 1,100 mm Table clamping area: 1,200 x 2,000 mm Drilling capacity - Ø solid material approx. 4 – 25 mm Tool holder HSK 50 Spindle speeds: 1,260 – 15,000 rpm Feed rates/rapid traverses for Z/X/Y axes Infinitely variable: 100 – 10,000/15,000 mm/min Feed drive power: 27 Nm / 1000 daN Spindle drive power: 7 kW Total drive approx. 30 kW – 400 V – 50 Hz Weight approx. 10,000 kg Accessories / Special features: – Ideal machine for complete machining of larger workpieces, die forms, plates, etc. using deep hole drilling Ø 25 x 1,000 deep, milling up to Ø 65, slot milling up to Ø 30, spiral drilling/boring up to Ø 30, countersinking and thread cutting up to M 24 x 3. – SIEMENS 840 D 4-axis CNC path control with process monitoring, etc. – High-frequency drilling spindle by GAMFIOR with infinitely variable spindle speeds. – Pneumatically actuated (200 mm) drill bush holder, swivels in 2 positions. – Stationary 12-position tool changer by MIKSCH, type CTM 40 with 800 mm stroke for holding twist drills, milling cutters, and tap tools; switching between ELB deep hole drills and standard tools is manual. – Table is stationary for high workpiece weights and accurate drilling. – On the table: FIBRO CNC rotary indexing table type RTN 400 = 420x420 as B axis – For mounting on the table: hydraulic FIBRO rotary indexing table, Ø 1,000 mm, indexing 3 – 144 or angle settings 2.5 – 120° – Large coolant system, approx. 11 kW pump with scraper conveyor and various filters Gbjdpfx Aet Hw Ayjdkor – 2 steady rests for supporting deep hole drill shafts – Complete work area enclosure with lateral and frontal access Condition: very good – a truly rare opportunity, will soon be available for demonstration under power Delivery: ex-stock here Payment: strictly net – upon receipt of invoice We look forward to your order. For further questions, we are at your disposal.

Stanje: dober (rabljeno), Leto izdelave: 2013, obratovalne ure: 44.789 h, številka stroja/vozila: 68023, globina vrtanja: 2.000 mm, dolžina podajanja os X: 1.250 mm, dolžina pomika po osi Y: 1.250 mm, Serijska številka: 68023, delovno območje X/Y/Z 1.250 x 1.250 mm, os W (horizontalna enota za vrtanje in frezanja) 2.000 mm, os A (enota za vrtanje in frezanja, ki se lahko nagiba) -25° - +15°, os B (rotacijska miza) 360°, nosilnost mize 15.000 kg, z referenčno ploščo, proizvajalec Pfleghar, 6 delov, skupne mere 1.800 x 1.800 x 40 mm, mreža 50 M16 Ø 24, sestavljeno iz 3 x tip TF-600 x 800 x 40 in 3 x tip TF 1.000 x 600 x 40, maks. globina vrtanja 1.800 mm, premer vrtanja 5-50 mm, teža stroja 48.000 kg, nameščen v jami, vpenjalni sistem za orodje SK50, sistem za hitro menjavo orodja, menjalna revija, 24 mest, nadzor, proizvajalec Heidenhain, nadzorna plošča BS 73.247, delovanje stroja 44.789. Gbjdpfx Adozld Ugjker Cena je navedena kot neto cena ob dobavi iz tovarne. Demontaža, dvig in natovarjanje so opravljeni na stroške in odgovornost kupca.

Stanje: dober (rabljeno), Leto izdelave: 2006, dolžina podajanja os X: 1.650 mm, dolžina pomika po osi Y: 1.000 mm, Deep hole drilling machine Imsa - MF 1200 BBL Godpfx Aowyup Tjdkobr MACH-ID 9176 Manufacturer: Imsa Model: MF 1200 BBL Control: SELCA S4045 Year of manufacture: 2006 Max. drilling diameter in steel: 5 - 40 mm X-axis travel: 1650 mm Y-axis travel: 1000 mm W-axis travel: 500 mm Table dimensions / L x W or Ø: 1200 x 1500 mm Spindle taper: SK40Mk Spindle speed: 4200 rpm Length: 6500 mm Width: 3800 mm Height: 3400 mm Weight: 6500 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, globina vrtanja: 1.250 mm, dolžina podajanja os X: 1.700 mm, dolžina pomika po osi Y: 800 mm, dolžina podajanja os Z: 600 mm, teža obdelovanca (maks.): 6.000 kg, potovalna razdalja osi X: 1.700 mm, pomik osi Y: 800 mm, pomik po osi Z: 600 mm, največja hitrost vretena: 4.200 obr/min, zmogljivost vrtanja: 30 mm, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, - Krmilnik HEIDENHAIN TNC 620 Gbjdpfxezixyro Adker - Elektronski ročni kolesnik - Dimenzije mize 1000 x 1000 mm - Ročni sistem menjave mize s PREDNIČNO TOČKO - Rotacija mize os B 360.000 pozicij/obrat - Nagib mize os A +/- 22,5° - Globokovrtalno vreteno 11 kW / 6000 RPM - Rezkalno vreteno ISO 40 / 13 kW / 6000 RPM - Magazin orodij ISO 40, 24 mest - Dimni izsesovalec AR FILTRAZIONI - CE oznaka

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, teža obdelovanca (maks.): 7.000 kg, potovalna razdalja osi X: 2.000 mm, pomik osi Y: 800 mm, pomik po osi Z: 2.000 mm, hitrost vretena (min.): 6.000 obr/min, premer vrtanja: 32 mm, MENJALNIK ORODIJ ZA 24 ORODIJA Gbjdpfxjzi Eqdo Adksr DELOVNA PLOŠČA 1000 X 1500 MM CNC SISTEM MITSUBISHI 530

Stanje: dober (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, globina vrtanja: 1.150 mm, skupna masa: 12.000 kg, premer vrtanja: 32 mm, Heidenhain iTNC530 CNC control 12-position tool changer Technical data: Travels: X-axis longitudinal (table): 1800 mm Z-axis cross (column): 1700 mm W-axis cross (drilling unit): 1150 mm Y-axis vertical (drilling unit): 1200 mm B-axis (rotary table): 360° A-axis (drilling unit): -25° to +15° Deep drilling area (ELB): Diameter range: 6–32 mm Gbsdpfx Adswcldajker Max. drilling depth: 1150 mm Drive power: 40 kW Machine weight approx.: 12,000 kg Technical data, accessories, and machine description are non-binding. For further technical details, please refer to the photos.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1976, Funkcionalnost: popolnoma funkcionalen, globina vrtanja: 1.500 mm, dolžina podajanja os X: 2.030 mm, dolžina pomika po osi Y: 1.800 mm, dolžina podajanja os Z: 1.700 mm, dolžina mize: 2.200 mm, širina mize: 1.800 mm, obremenitev mize: 12.000 kg, Stroj za globoko vrtanje Ixion (globina vrtanja 1500 mm, X 2030 mm, Y 1800 mm, Z 1700 mm) Osnovni stroj je PEGARD vrtalna obdelovalna enota AF 13 (letnik 1976, teža stroja cca 32 t) 1996 je bil izveden retrofit in predelava v stroj za globoko vrtanje TLB (predelavo je izvedlo podjetje ROTTLER Maschinenbau GmbH - Mudersbach) Leta 2024 je bila opravljena generalna prenova (zamenjana vretena ležajev, demontaža in čiščenje nosilca vodil za vrtalno pušo/hlajenje, popravilo hidravlike za vpenjanje orodja, čiščenje in pregled hladilnega ter hidravličnega agregata itd.) Delovni hodi: - X-os (vzdolžno) 2030 mm - Y-os (vrtalna enota, vertikalno) 1800 mm - Z-os 1700 mm - Globina vrtanja v enem prehodu 1500 mm - B-os (vrtljiva miza) 0–360° Vrtalna enota: - Glavno vreteno ISO40 - Hitrost vrtenja vretena 60–6000 min⁻¹ - Pogonska moč pri 100% ED 7,5 kW NC-rotacijska miza (B-os) - Površina mize 2200x1800 mm - Krožna os 0–360° - Maks. obremenitev mize 12.000 kg - Natančnost pozicioniranja +/- 15 sec Sistem za hlajenje/odvod odrezkov - Velikost rezervoarja ca. 1000 l - Tlak hladilne tekočine maks. 80 bar - Pretok maks. 46 l/min Gjdpfx Ajy Rhzwedkebr - Papirni tračni filter - Strgalo/odvodnik odrezkov CNC krmilje - Mitsubishi M325 s 14" barvnim zaslonom - Integriran nadzor zloma orodja prek nadzora navora glavnega vretena - Vizualizacija procesnih veličin navora v realnem času - Programi za globoko vrtanje - Prenosni elektronski ročni kolesni upravljalnik

Stanje: novo, This is a new machine manufactured in Romania by the company Emsil. Customer-specific requirements can be accommodated, depending on technical feasibility, and are reviewed in advance by the manufacturer's engineering department. Gjdpfx Adou Id H Aokobr About the spindles: The Narwhal is equipped with a boring spindle made from hardened, tempered, and alloyed steel. It features preloaded angular contact precision ball bearings. Additionally, the machine is fitted with a milling and boring bar capable of handling exceptional performance and torque. The bar is constructed from nitrided, alloyed steel and also utilizes preloaded angular contact precision ball bearings. Its movement occurs on bronze guide bushings. Both unit clamping mechanisms, responsible for securing and releasing the ISO 50 tool holder taper, operate fully automatically. Rotary Table: Table rotation is achieved via a twin pinion gearbox, a centrally supported shaft, and a hydrostatic sliding block for the central bearing, all engineered to guarantee maximum precision even with heavy, unbalanced loads. A recirculating ball system is used for the X axes. Both axes feature a direct measuring system. CNC Axis Control: All nine axes of the machine are permanently monitored. The monitoring system includes a 15'' TFT screen, operator panel, remote diagnostics which alerts the user in case of any errors, user memory, network connectivity, remote process control, integrated PLC, and more. The machine is compatible with various control systems such as Heidenhain, Fanuc, Siemens, etc. You select the sizes for the machining X/Y and Z axes: from 1200–3500 / 1000–3500 / 400–1500 mm as required! Best regards.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1985, Nazivna globina vrtanja 750 mm Polno vrtanje v jeklo pribl. 30 mm Največja hitrost vretena 5700 min-1 Gbjdsy N Ecpspfx Adkjr Vpenjalna miza 1280 x 420 mm Prečni pomični stroj Rezervoar za hladilno tekočino Razni dodatki (svedra, puše)

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2019, DÉTAILS TECHNIQUES Profondeur de perçage : 1 400 mm Plage de perçage plein : 40 mm Vitesse de broche : 670 - 3 560 tr/min Hauteur de pointe au-dessus du banc : 380 mm Hauteur de pointe au-dessus du sol : 1 400 mm Longueur de la table : 1 200 mm Largeur de la table : 1 200 mm Course du plateau transversal : 2x400 mm Hauteur de pointe au-dessus de la table : 250 – 600 mm AXE Z Vitesse d’avance : 0-7 000 mm/min AXE W – 400 mm Vitesse d’avance : 0-7 000 mm/min AXE X – 800 mm Vitesse d’avance : 0-2 000 mm/min AXE Y – 350 mm Vitesse d’avance : 0-3 000 mm/min Vitesse de déplacement rapide : 3,5 m/min Vitesse nominale du moteur : 8 000 tr/min Puissance nominale du moteur : 18,5 kW Gbjdpfx Ajw Ekfujdksr DÉTAILS MACHINE Tension d’utilisation : 380 V Fréquence : 50 Hz Puissance connectée : 40 kW Longueur totale : 6 500 mm Largeur totale : 3 500 mm Hauteur totale : 2 900 mm Poids : 8 t ÉQUIPEMENT Commande Siemens Sinumerik 840 Dsl Système d’arrosage inclus, 1 700 l 20 forets à une lèvre de D=6mm–20mm / longueurs de 1 200–1 750mm

Stanje: zelo dobro (rabljeno), Drilling capacity: 16 mm Morse taper 2 (MT2) spindle Maximum drilling depth: 485 mm Table size: 590 x 350 mm, 360° rotatable Various accessories Godpfx Asq Dlznjdkjbr Marcels Maschinen AG

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1970, - Drilling diameter: 5–30 mm Gjdpfoxzz Hjx Adkebr - Drilling depth: 750 mm - Filter - Pump

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, Vrsta stroja Globinska vrtalna naprava Proizvajalec TBT TIEFBOHRTECHNIK Tip ML 250-2-850 Leto izdelave 2014 Stanje Rabljeno Način upravljanja CNC Krmilnik SIEMENS Lokacija skladišča Tovarna Krmilnik SIEMENS Premer vrtanja Gbedoza Arnepfx Adksr Ø 3 - 25 (18) mm Št. vrtljajev 1000 - 6100 obr/min Hod vrtalnega vozička 850 mm Globina vrtanja 550 mm Razdalja med vreteni 240 mm Mere D x Š x V ca. 6 x 5 x 2,3 m Teža za transport ca. 6000 kg Transportna mera ca. 10 nakladalnih metrov

Stanje: dober (rabljeno), Leto izdelave: 1997, TBT ML 200-2-850 Deep Hole Drilling Machine TECHNICAL DATA Type: M200-2-850 Number of spindles: 2 Drilling slide stroke: 850 mm Drilling method: Single-lip drilling Drilling depth with: Plunge spindle: 120 mm Sealing housing: 400 mm Sealing housing with steady rest: 350 mm Spindle drive Power: 2 / 3.5 / 1.5 kW Gbsdsvca Rcspfx Adkor Voltage: 140 / 350 / 350 V Speed: 14 / 11 / 6 / A Feed – self-driven Feed rate: 20 – 500 mm/min Rapid traverse NC operation: 12 m/min Feed force: 1.5 kN Motor torque: 2.2 Nm at 3000 rpm Tailstock Motor power: 0.75 kW at 1000 rpm Spindle speed: 500 rpm Max. stroke: 200 mm Main dimensions L x W x H: 4600 x 2500 x 2100 mm Transport weight: 3200 kg Control system: Sinumerik 805 M No guarantee is provided regarding the accuracy, completeness, or currency of the information given.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, • Maximum possible drilling depth: 1200 mm • Maximum hole diameter: 32 mm • Minimum drilling diameter: 6 mm • Longitudinal travel (X-axis) table: 1800 mm • Cross travel (Z-axis) column: 1700 mm • Cross travel (W-axis) drilling head: 1150 mm • Vertical travel (Y-axis) drilling head: 1200 mm • Clamping surface NC table: 1500 x 1000 mm • Maximum table load: 10 t • Rotary axis (B-axis) rotary table: 360° • Rotary axis (A-axis) drilling head: -25°/+15° • Feed rate: 1–15 m/min (Y-axis: 1–10 m/min) • Rapid traverse speed in all axes: 15 m/min (Y-axis: 10 m/min) • Maximum spindle speed: 6000 rpm • Minimum spindle speed: 60 rpm • Tool holder: SK 40 • Tool clamping: OTT • Rated power main spindle (100% duty cycle, S1/40% duty cycle, S6): 9/13 kW • Coolant tank capacity: 1000 l • Maximum coolant pressure: 100 bar • Low-pressure external and high-pressure internal coolant supply • Power supply: 3x 400 V; 50 Hz • Footprint (L x W x H): 6550 x 5350 x 4130 mm • Machine weight: 12000 kg Equipment of the deep hole drilling machine • CNC control: HEIDENHAIN iTNC 530 • Interpolated rotary table with minimal backlash, dimensions 1500 x 1000 mm Gbjdpfx Aexyf E Nodkjr • Swivelling drilling head +15°/-25° • Shank drilling head • Handwheel HR520 • Fixed supports (2 pieces) • Tool magazine: - ELB tools: 12 pieces (max. diameter: 32 mm / max. length: 1550 mm) - Standard tools: 12 pieces (max. diameter: 140 mm / max. length: 400 mm) • Direct measurement and positioning control system in X, Y, and Z axes • Collision monitoring system for supports and drill sleeves • Oil cooler • Coolant flow control system • Adjustable coolant nozzles • Cooling unit for electrical cabinet • Enclosed top cover (roof) • Drip tray for machine and tank system (tray height 30 mm) • Extraction unit • Infrared probe • Drilling depth extension 1200 mm (retrofit) • Chip conveyor

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, globina vrtanja: 600 mm, največja hitrost vrtenja: 6.000 obr/min, višina središča: 250 mm, model krmilnika: SIEMENS Sinumerik 840 D, premer obdelovanca (maks.): 25 mm, Aucun prix de réserve - vente garantie au plus offrant ! La machine a été entièrement remise à neuf ! DÉTAILS TECHNIQUES Profondeur de travail : 600 mm Diamètre de travail : 4 – 25 mm Nombre de broches : 2 Hauteur de pointe : 250 mm Entraxe : 203,2 mm Plage de vitesse : 1 000 – 6 000 tr/min Avance : 0 – 300 mm/min Avance rapide : 6 000 mm/min DÉTAILS DE LA MACHINE Commande : SIEMENS Sinumerik 840 D (modernisé) Système de perçage : perçage à canon à une lèvre Entraînement principal : 2 x 5,5 kW ÉQUIPEMENT - Fonctions individuelles pour la mise en place de la machine - Semi-automatique avec chargement manuel - Chariot porte-broche renforcé - Surveillance de la machine avec affichage de la vitesse de broche Gbjdpfx Aoxpvbtedker - Plateau de table en fonte spéciale - Dispositif de protection avec porte coulissante - Banc de machine avec guidages linéaires trempés et rectifiés - Alimentation interne en liquide de refroidissement par la broche - Équipement électrique conforme à la norme IEC - Armoire électrique séparée avec dispositifs de sécurité - Pupitre de commande dans la zone de travail

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, globina vrtanja: 1.000 mm, dolžina podajanja os X: 1.650 mm, dolžina pomika po osi Y: 1.000 mm, pomik po osi Z: 360 mm, največja hitrost vretena: 4.200 obr/min, premer vrtanja: 40 mm, hitro pomikanje X-os: 10 m/min, hitri pomik os Y: 10 m/min, hitri pomik na osi Z: 10 m/min, moč vretenovega motorja: 10.000 W, dolžina mize: 700 mm, širina mize: 1.400 mm, obremenitev mize: 4.000 kg, dolžina pomika os W: 500 mm, Selca S4040D CNC Control Drilling depth, transverse V-axis travel: 1,000 mm Column, longitudinal X-axis travel: 1,650 mm Drilling slide, vertical Y-axis travel: 1,000 mm Drilling slide, workpiece support W-axis travel: 500 mm Drilling slide, vertical 'swivel' max – A-axis degrees: +20° / -20° Rapid traverse, adjustable speed max: 10,000 mm/min Drilling diameter (solid material) min/max: 5 - 40 mm Drilling spindle, rotation, adjustable speed: 1 - 4,200 rpm Drilling spindle motor power: 10 kW Fixed clamping table, dimensions: 700 x 1,400 mm Gsdjxpwf Tepfx Adkebr Clamping slots, standard type: 18 mm Hydraulic pump motor power: 7.5 kW Gun drill shank; shank for drills > 6: 10 x 40 mm Gun drill shank; shank for drills < 6: 25 x 70 mm Rotary & "BARRASENO" CLAMPING TABLE, B AXIS Dimensions: 800 x 1000 mm Clamping slots, standard type: 18 mm Maximum axial load (rotary): 4,000 kg Continuous radial resolution B-axis: 360,000 div/rev Maximum vertical resolution of "BARRASENO" – B1 axis: +20° / -20° Small milling/threading head etc. Maximum horizontal Z-axis stroke (830): 360 mm Spindle rotation, adjustable speed max: 2,200 rpm Threading spindle motor power: 10 kW ISO40 tool changer with 10 rotary-translating stations USED MACHINE

Stanje: zelo dobro (rabljeno), GLOBOKOVRTALNI STROJ IMSA MODEL MF 1000 BB HODI: VZDOLŽNA OS 1250 mm PREČNA OS (FREZALNA PINOLA) 380 mm PREČNI HOD GLAVE 500 mm VERTIKALNI HOD 1000 mm DIMENZIJA VRTLJIVE MIZE 1000x800 mm Gbsdpfsytff Dex Adker SKUPNA TEŽA STROJA 20.000 kg