Deep hole drilling machine

TBT / SFT TBMH 8-1-500 (M200-1-850)

Stanje: rabljeno, Leto izdelave: 2012, Tehnične podrobnosti: Premer kolesa - max.: 260 mm Širina kolesa: 320 mm Chjdoy Amllepfx Ag Eed Modul - max.: 5 Teža stroja cca: 21 t Potrebni prostor cca: 8,71 x 5,97 x 3,49 m Območje števila zob: 1...999 Maks. kot poševnosti: +45/-45 ° Min. korak: 0,1 mm Maks. korak: 1000 mm Os X: 345 mm Os Y: 250 mm Os Z: 320 mm Os B: 360 ° Os C: 360 °

Leto izdelave: 1999, stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Manufacturer: Arthur Klink Year of manufacture: 1999 Type: Horizontal Broaching Machine Model: RIW 10x1600x400 Weight: 2,700 kg General / Technical Data: Horizontal hydraulic internal broaching machine in nearly new condition, equipped with a tool support system, ideal for the use of flat broaching tools. Broaching stroke: 1,600 mm Pulling force: 10,000 kg (100 kN) Mounting in drawbridge: Ø 85 mm cylindrical Through-hole in clamping table: Ø 100 mm Workpiece diameter: max. 400 mm (limited by tool pan housing) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Machine footprint (W x D x H): approx. 6,400 mm x 1,450 mm x 1,600 mm (excluding work area) Power supply: 400 V, 50 Hz Connected load: 9 kW Equipment: • Machine features electric control for the broaching movement with both manual and automatic operation • Integrated coolant and cutting fluid system • Tool support system for flat broaching tools (no feed mechanism) • Broaching slide with draw head mounting is equipped with flat guides on both sides Codpfx Asr A Hcbog Eohd Accessories: • 1 universal draw head for flat shanks from 3 mm up to max. 25 mm width and a maximum pulling force of 10 kN (10,000 kg) • Complete machine documentation, as well as CE declaration of conformity Remarks: The machine is ideal for producing keyways. Thanks to the combination of the machine's stable bed and the tool support system, it is particularly well suited for easy and fast use of flat broaching tools. The machine has seen very little use and is in like-new condition. The machine is available for inspection at our warehouse and is ready for demonstration under power. Our direct contact details, as well as further information about the machine, can be found in the attached PDF document.

Leto izdelave: 2005, stanje: pripravljen za uporabo (rabljen), potovalna razdalja osi X: 285 mm, pomik po osi Z: 1.150 mm, proizvajalec krmilnikov: FANUC, model krmilnika: 21i-TB, moč vretenovega motorja: 7.500 W, največja hitrost vretena: 3.200 obr/min, število osi: 3, Ta 3-osna CNC-krožna brusilka tipa STUDER S33 je bila izdelana leta 2005 in leta 2026 popolnoma obnovljena; po obnovi je bila uporabljena 0 ur. Ima višino vretena 175 mm in razdaljo med vreteni 1000 mm. Stroj je opremljen z zmogljivo 7,5 kW vreteno in nadzorno ploščo z 10,4-palčnim barvnim zaslonom na dotik. Če iščete visokokakovostno brušenje, razmislite o CNC-stroju STUDER S33, ki ga ponujamo v prodajo. Za več podrobnosti nas kontaktirajte. - Popolnoma obnovljen leta 2026 - Delovne ure: 0 ur po obnovi - Višina osi: 175 mm - Razdalja med osmi: 1000 mm - Strojna postelja: mineralni liti granit S103 - Gibi: 285 mm (os X) x 1150 mm (os Z) - Pogon osi X: AC-servomotor in kroglični vijak, 0° kota, hitrost podajanja 0,001–5,000 mm/min - Pogon osi Z: AC-servomotor in kroglični vijak, hitrost podajanja 0,001–10,000 mm/min - Merilni sistem: Inkrementalni merilni trak za osi X in Z, ločljivost 0,0001 mm - Vretenčna glava za brušenje: Univerzalna za zunanje in notranje brušenje, Hirthovo ozobčenje 1° (-15° do +195°) - Vreteno (pozicija 2): 7,5 kW, 1.400 do 3.200 vrt/min, programirljna hitrost rezanja, maks. 50 m/s - Zaščita za zunanje brušenje: Premer diska D 500 × 63 mm F1 (80 mm F5) z avtomatsko zaščito pred dotikom - Vreteno za notranje brušenje (pozicija 3): Studerjev pasni pogon, vreteno za notranje brušenje (180°) s frekvenčnim pretvornikom - Nosilec obdelovanca: Univerzalen, na valjčnih ležajih, konični vretenčni nastavek MK5, cilindrična zunanja konica D 70 mm, luknja v vretenu D 28 mm, ročno zaklepanje vretena - Pogon delovne glave: 1,8 kW AC-servomotor, območje vrtljajev 1–1.500 vrt/min, hitrost korakov 1–50 vrt/min - Teža obdelovanca: maks. 80 kg med vreteni Csdpfx Agjzwd Hge Eshd - Podporni nastavek: Konični vretenčni nastavek MK4, 35 mm gib, premer puše 50 mm, hidravlično umikanje puše z nadzorom, ročna fina nastavitev +/- 0,04 mm - Pnevmatična dvižna naprava: Pnevmatično dviganje za enostavno premikanje vretenčne glave in podpornega nastavka - Nadzor: Fanuc 21i-TB s 10,4-palčnim barvnim zaslonom na dotik, integriran PLC, 32 KB pomnilnika za uporabnika, 400 pomnilniških mest za programe - Napajanje: 400 V ± 10 %, 50 Hz ± 1 Hz, 24 V DC nadzorna napetost Posebna oprema: - Dittel Sensitron 6 kontaktno tipalo z magnetnim senzorjem (1 kos) - Aktivni merilni senzor Movomatic C25 LP - 3 izravnalne plošče - Klimatska naprava za omarico - Ročna enota Euchner - Nagibna nastavitev za notranje brušenje - Parkirna pozicija za podporni nastavek - 3 Studerjeva vretena s pasnim pogonom za notranje brušenje (24.000 vrt/min / 40.000 vrt/min / 60.000 vrt/min) - Stopalo za nadzor osi C pri odprtih vratih - Stopalo za aktivacijo sponke (podporni nastavek) - Električni vmesnik za rotacijsko nastavitev (vreteno je opcijsko) - Movomatic – sistem za nadzor procesa ES 124 (merilna glava je opcijska) - 8 rabljenih prirob za brusne krožnike za zunanje brušenje - Različne nove konične vretenčne nastavke MK4 - Različne nastavke Dodatne funkcije: - Primerno za brušenje navojev in oblik (programsko opremo je treba zahtevati neposredno pri družbi Fritz Studer AG)

Stanje: dober (rabljeno), globina vrtanja: 1.500 mm, dolžina podajanja os X: 2.000 mm, dolžina pomika po osi Y: 1.300 mm, dolžina podajanja os Z: 1.500 mm, Manufacturer: TBT Tiefbohrtechnik Model: BW 250-S Control: SIEMENS 840D Year of manufacture: 2007 Drilling, milling, and tapping machine for heat exchanger bases and plates Swiveling A-axis: +25° to -15° Filtration and coolant system: 1,000 L Chip conveyor: 2,000 x 1,200 mm – output height Milling tool changer, tower station, 20 positions ELB drilling capacity: 3 – 35 mm Chsdpov A Uw Dofx Ag Eod Milling capacity: 250 cc/min Feed rates on all axes (X-Y-W-Z): 15,000 mm/min Approx. 15,000 spindle hours Comes with a large tooling package Specifications Metric / US Standard Max. drill diameter (steel): 40 mm Drilling depth: 1,500 mm X-axis travel: 2,000 mm Y-axis travel: 1,300 mm Z-axis travel: 1,500 mm W-axis travel: 750 mm Table load capacity: 15,000 kg Table dimensions (L x W or Ø): 1,600 x 1,200 mm Spindle taper: HSK 63 Mk Spindle power: 11 kW Spindle speed: 8,000 rpm Dimensions (approx.): Length: 7,200 mm Width: 7,800 mm Height: 4,250 mm Weight: 23,000 kg Please note: The information on this page has been provided by us and, where possible, obtained from the manufacturer to the best of our knowledge. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, they do not constitute representations or contractual terms. We recommend verifying all critical details.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 730 mm, pomik osi Y: 400 mm, pomik po osi Z: 425 mm, hitro pomikanje X-os: 60 m/min, hitri pomik os Y: 60 m/min, hitri pomik na osi Z: 60 m/min, vrtilni moment: 90 Nm, proizvajalec krmilnikov: Siemens, model krmilnika: 840D PL, skupna masa: 10.000 kg, največja hitrost vretena: 12.000 obr/min, dovod hladilne tekočine: 25 letvica, število vreten: 1, število mest v zalogovniku orodij: 20, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, We are Chiron experts. The machine is currently being partially overhauled and is in very good condition. Should you require a probe or any other additional option, we can retrofit these at extra cost. FZ15W with 4th and 5th axis Machine dimensions: approx. 4,200 mm x 2,400 mm Travel paths: -X = 730 mm -Y = 400 mm -Z = 425 mm Chjdpfx Agewpcfue Esd Control system: 840D Powerline Main spindle: -Speed: 12,000 rpm -Tool holder: SK40 -Torque: max. 90 Nm Tool changer: -Tool stations: 20 Workpiece changer: -Peiseler table with Afro controller Chip conveyor Coolant system with internal and external cooling Hydraulic clamping device Complete documentation available Geometry is in top condition: -HS runout: 0.008 mm -QC20 measurement: 12.6 μm (manufacturer tolerance 18 μm for new machines, 23 μm for used machines) The machine can be inspected under power at any time.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, - RABLJENO - 5-OSNI MOSTNI VERTIKALNI OBDELOVALNI CENTER POMIK X-OSI: 1750 mm POMIK Y-OSI: 1400 mm POMIK Z-OSI: 600 mm HITROST POMIKA X-Y-Z: 35 m/min VRETENO: 18000 vrt/min; 18,5-25 kW; HSK A63 VELIKOST MIZE: 1000 x 1200 mm MAKSIMALNA DOVOLJENA OBREMENITEV: 5000 kg MAGAZIN ORODIJ: VERIŽNI; 30 POZICIJ GLAVA: AVTOMATSKA OS A/B KRMILNA ENOTA: HEIDENHAIN iTNC 530 Cjdpfx Agswl R Dds Eehd TEŽA: 18000 kg SKUPNE DIMENZIJE: 6000 x 4000 x 3850 mm DODATNA OPREMA: TRANSPORTER ODPADKOV; PRENOSNO ROČNO KOLO; LASERSKI NASTAVLJALEC ORODIJ

Stanje: dober (rabljeno), HERMINGHAUSEN SR40 III CNC Centerless Grinding Machine Chsdpfx Ajgq Ddfsg Eed

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, A machining center is available. Travel range X/Y/Z: 550mm/400mm/425mm, A-axis: +/-100°, rapid traverse: 40m/min, spindle speed: 10,500 rpm, tool stations: 20, tool holder: SK40, table load capacity: 300kg, control system: Siemens Sinumerik. The machine screen is defective. Documentation is available. On-site inspection possible. Cjdpfx Aswxfa Heg Eehd

Stanje: rabljeno, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of Manufacture: 2007 Rolling Force: max. 24 tons Tool Diameter: max. 270 mm Roll Spindle Diameter: 69.85 mm Tool Bore Diameter: 70 mm (nominal diameter) Mounting Length, Tool Length: max. 180 mm Workpiece Diameter: max. 50 mm Hydraulic Motor Power: 3 kW Roll Drive Motor Power: approx. 5.5 kW Mains Connection: 400 Volt, 50 Hz, 10 kW - Pivoting roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gear shift - Hydraulic system integrated in machine frame - Operating manual with electrical diagram Space requirements (L x W x H): 2000 x 1450 x 190 mm Cedpfjuz If Nox Ag Ejhd Weight: approx. 3 tons Very good condition Plunge rolling: The thread rolling dies, with the same pitch as the workpiece, form the thread by pressing into the workpiece up to the nominal diameter. The thread length is at most as long as the width of the rolling dies. Through-feed rolling: Used when the thread length exceeds the width of the rolling dies. Through-feed dies have three functional zones – lead-in, calibration, and lead-out. Knurling Rolls: These rolls have no pitch and are swiveled at the pitch angle of the profile to be rolled. Pitch Rolls: Pitch rolls have a profile with a pitch, differing from knurling rolls. The sum of the pitch angle and swivel angle determines the pitch angle in the finished workpiece.

Stanje: delavnici obnovljeno (rabljeno), Steel grinding machine Manufacturer: REMA Model: DS 07/ST Version with pole-switchable motor 0.22/0.37 kW 1450/2900 rpm Year of manufacture: unknown Machine no.: 022857 Equipment: Csdpfjhvu Tmsx Ag Eohd - Reversing switch for right/left rotation - Stand version with chip tray - Wet grinding attachment - 2 support tables ATS (left), adjustable from -5° to +15°, with spring suspension - 2 angle stops - Adjustable support table ATK (right) for grinding chip breaker steps - Steel holder for ATK support table, 360° rotatable, swivelling, with height adjustment and knurled screw for adjusting chip depth - Enlarged protective cover (left) with silicon carbide cup wheel Ø 175 mm, with mounting flange - Protective cover (right) for grinding wheels Ø 125 mm, with mounting flange - Operating instructions Used as seen, without warranty