Stroji za globoko vrtanje nakup rabljenega (74)

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2019, TECHNICAL DETAILS Drilling depth: 1,000 mm Solid drilling range: 30 mm Boring range (enlarging holes): 40 mm Spindle speed: 670 - 3,560 rpm Centre height above bed: 380 mm Centre height above floor: 1,400 mm Table length: 1,200 mm Table width: 1,200 mm Cross table travel: 2x400 mm Centre height above table: 250 – 600 mm Z-axis Feed rate: 0-7,000 mm/min W-axis – 400 mm Feed rate: 0-7,000 mm/min X-axis – 800 mm Ljdpow Ekfujfx Ah Doah Feed rate: 0-2,000 mm/min Y-axis – 350 mm Feed rate: 0-3,000 mm/min Rapid traverse speed: 3.5 m/min Motor rated speed: 8,000 rpm Motor rated power: 18.5 kW MACHINE DETAILS Operating voltage: 380 V Frequency: 50 Hz Connected load: 40 kW Overall length: 6,500 mm Overall width: 3,500 mm Overall height: 2,900 mm Weight: 8 t EQUIPMENT Controller: Siemens Sinumerik 840 Dsl Including coolant system, 1,700 l 20 single-lip drills, D=6 mm–20 mm/lengths 1,200–1,750 mm Operating hours: 13,000 h

Stanje: rabljeno, Stroj za globoko vrtanje TBT T10-120 Laedpfx Aoxbtzzjh Dsh

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, obratovalne ure: 20.709 h, 2 spindles Drilling data: Spindle 1 (4 kW): 5–18 mm Spindle 2 (1.2 kW): 1–4 mm Spindle speed: Spindle 1: 600–6,000 rpm Spindle 2: 2,000–24,000 rpm Drilling depth: approx. 1,200 mm (with Ø8 mm and use of 3 steadies) Rapid traverse: 15,000 mm/min Lsdoww Ihqjpfx Ah Dsah Slide stroke: 1,800 mm Machine weight: 7,500 kg

Stanje: dober (rabljeno), Deep Hole Drilling Machine MEWAG - IXION TL 500 - Drilling depth approx. 500 mm Lodpfxewm Hcle Ah Djah - Table size 800 x 450 mm - Support / drilling table rotatable and angle-adjustable 0-360 degrees - Manual drilling stroke - Drill chuck - Various deep hole drills included - Power connection cable Dimensions: LxWxH 1.6 x 0.8 x 1.6 meters / Weight 1300 kg Subject to errors and input mistakes.

Stanje: zelo dobro (rabljeno), For sale: Hegner Multicut 2S Laodpfx Ahsq R Ufxj Djh Ready for operation

Stanje: rabljeno, Leto izdelave: 1965, Core drilling diameter - max. 50 mm Drilling depth 2000 mm Swing diameter mm Drilling diameter max. 110 mm Total power requirement 30 kW Machine weight approx. 10 t Year of manufacture: 1965 Overhauled: 2000 Drilling Ø - Solid drilling approx. 2 - 50 mm - Boring out approx. 100 mm Drilling depth max. 1,600/possibly up to 2,000 mm (see stroke/installation length) Laodpfx Ahjt Hwucj Dsh Stroke of drilling carriage approx. 4,000 mm Distance between the two spindle heads 5,000 mm Center height above guideway 350/450 mm Feed rate of the drilling carriage, stepless: 20 - 200 mm/min Rapid traverse of the drilling carriage: 2,500 mm/min Workpiece speeds via belt pulley: 260 - 650/650-1625 RPM Main spindle drive 24 kW Coolant pump drives: 1 x 7.5/15 kW - 1 x 15/28 kW Total drive approx. 60 kW 380 V - 50 Hz Total length of machine/guideways 7500/5000 mm Total weight approx. 10,000 kg Accessories / Special equipment: "Machine consists of the following elements: The main spindle on the left, followed by a BOZA, table group driven by ball screw spindle, BOZA with increased center height, and at the end a spindle head of the B 16 series with drive motor approx. 7.5 kW n = 900/2400 and 2400/6000; very large and elaborate coolant system with filtration unit, extensive accessories and drilling tools up to 100 mm Ø. " Suitable for rotating workpiece/fixed drilling tool/ELB and BTA processes, as well as for stationary workpiece and rotating drilling tool. Can operate with internal oil supply (ELB) as well as external oil supply (BTA). " Complete coolant oil system with tank and filter, 2 high-pressure pumps by SIG, adjustable flow rate/min = 17/40/120 or 220/500 l/min. Capacity approx. 2,500 l. " Feed of the main carriage via ball screw spindle and steplessly controllable DC motor; currently, a cross-adjustable table approx. 500 mm, size approx. 800 x 800 mm, is mounted for clamping cubic and cylindrical workpieces. Electrical control via cam track approx. 2,500 mm and limit switches for rapid traverse, feed, and return. " 2 closed 3-point steady rests, FORKHARDT 3-jaw manual chuck approx. 315 mm Ø, " Modernized control panel with speed display, feed setting and display, kW display, feed/rapid traverse switch (forward/reverse), etc. " 2 separate control cabinets, separate BOZA, sleeves, reducers, clamping aids, etc. Condition: good - soon ready for demonstration, machine is very valuable due to accessories Delivery: ex stock - as inspected Payment: strictly net - upon receipt of invoice Further deep hole drilling machines constantly in stock - please contact us.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, globina vrtanja: 1.500 mm, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 1.200 mm, pomik po osi Z: 1.300 mm, največja hitrost vrtenja: 5.600 obr/min, TEHNIČNI PODATKI Ljdpew Izr Asfx Ah Dsah Podatki o vrtanju Vrtalna globina: 1.500 mm Podatki o ose Pomik X-os: 3.000 mm Pomik Y-os: 1.200 mm Pomik Z-os: 1.300 mm Podajalna hitrost X-os: 15 m/min Podajalna hitrost Y-os: 15 m/min Podajalna hitrost Z-os: 15 m/min Podajalna sila: 30.000 N Hitrost hitrega pomika: 15 m/min Podatki o vretenu Število vrtljajev: min. 300 1/min Število vrtljajev: maks. 5.600 1/min Podatki o mizi Vpenjalna površina: 2.000 mm x 1.250 mm Število utorov: 7 Obremenitev mize: 12.000 kg Vpenjalo za orodje: SK50 PODROBNOSTI O STROJU Krmiljenje: TNC430 Mere in teža Mere (D x Š x V): 8.400 x 8.300 x 4.500 mm Skupna teža: 30.000 kg OPREMA Brezstopenjsko nastavljivo število vrtljajev Brusilnik za svedre Opomba: Demontaža in nakladanje se lahko ponudita za 8.000 €.

Stanje: rabljeno, Stroj za globoko vrtanje TBT T10-2-500 Lodpfx Ahsxbtzuo Dsah

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 106341-11, Leto izdelave: 2005, skupna masa: 8.000 kg, skupna višina: 2.700 mm, skupna dolžina: 5.660 mm, skupna širina: 3.956 mm, The drilling method used by the deep hole drilling machine is single-lip drilling. Drilling unit information: - Number of spindles: 1 - Continuously variable spindle speed: 300 - 8000 rpm - Spindle drive power: 7.5 kW - Maximum drilling depth: 800 mm - Minimum/maximum drilling diameter: 3 - 25 mm (based on ST 60) - Maximum spiral drilling: 25 mm - Maximum tapping: M24x3 - Milling material removal rate: 150 cc/min Travel distances: - X-axis travel: 800 mm - Y-axis travel: 400 mm - Z-axis travel: 630 mm - W-axis travel: 800 mm Traverse speeds: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Coolant system information: - Deep-hole drilling oil as coolant - Tank capacity: 800 litres - 1x scraper belt swarf conveyor - 1x hydraulic power unit and pneumatic system/equipment - 1x submersible pump: Pump capacity: 200 l/min - 1x low-pressure pump: Pump capacity: 100 l/min Pump drive: 1.7 kW - 1x compact belt filter: Filtration capacity: 120 l/min For use with: steel/non-ferrous materials Lasdpfx Ahsw E H E Re Doh - 1x radial piston pump with remote adjustment: Delivery rate: 2 - 94 l/min Pump drive: 7.5 kW Spindle unit: - Cartridge-type spindle with drive housing and gear-driven spindle drive. Spindle bearings are precision angular contact ball bearings with lifetime grease lubrication. Milling and drilling spindle unit: - For conventional machining - Spindle head with HSK 50 tool holder Drill bush carrier: - Version as a 2-position turret with electric swivel mechanism - Positioning via Hirth coupling - Turret head equipped for: - Tool guides for deep hole drilling - Milling and drilling spindle unit for conventional machining Pickup tool changer: - For conventional tools and drill bushes - Disc-type magazine with 20 positions including pick-up stroke Automatic tool changer for deep hole drilling tools: - Fixed ELB column magazine for at least 5 tools, including automatic tool clamping for HSK holders Clamping table with W-axis and NC rotary table: - Length/width: 800x600 mm - Positioning accuracy: B-axis +/- 30 seconds - Load capacity (centrally): 1500 daN Workpiece clamping device: - 1x tailstock with manually operated clamping - 1x NC dividing head (A-axis) with manually operated two-jaw chuck for workpiece clamping - 1x base plate for mounting and clamping drill bushes + support prisms Electrical equipment information: - 1x CNC control Sinumerik 840D (digital complete system), including PLC S7-300 Connection data: - Operating voltage: 3-phase 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 25 kW

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2017, obratovalne ure: 428 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 428, globina vrtanja: 400 mm, največja hitrost vretena: 23.700 obr/min, premer vrtanja: 6 mm, število vreten: 1, dolžina obdelovanca (maks.): 450 mm, No reserve price – guaranteed sale to the highest bidder! The machine has only 428 operating hours! TECHNICAL DETAILS Control system: SFT TBS 200 Drilling method: single-lip deep hole drilling Number of spindles: 1 Drilling diameter in steel: 1 – 6 mm Drilling depth with retractable spindle: 120 mm Drilling depth with sealing unit only: 400 mm Sealing unit with one-piece steady rest: 350 mm Max. workpiece length: 450 mm Max. rapid feed: 4,000 mm/min Spindle drive: Power at 2,810 rpm: 2 kW Power at 7,880 rpm: 3.5 kW Power at 23,700 rpm: 1.5 kW Frequency range: 100 – 800 Hz Tailstock: Motor power: 0.75 kW Spindle speed: 500 rpm Max. clamping stroke: 60 mm Feed carriage drive: Type: ball screw 25 × 5 mm with servo motor Drill bush holder and chip removal: Drill bush holder: rigidly mounted on machine bed Components: drill bush holder and sealing unit by BOTEK Chip removal: downward into chip container MACHINE DETAILS Dimensions: 2.7 x 3.05 x 1.7 m Weight: 2.5 t Operating hours: 248 h Operating voltage: 400 V Frequency: 50 Hz Connected load: 14 kW Lajdpfxowu Eb Ae Ah Deh Coolant system: Tank capacity: approx. 500 l Filtration: integrated paper band filter Coolant pump: one-piece with frequency converter Delivery rate: approx. 5 – 12 l/min Max. coolant pressure: 160 bar EQUIPMENT - Hydraulic tailstock (can be engaged) - Manual tailstock adjustment for various workpiece lengths - Drill bush holder and sealing unit by BOTEK - Direct chip removal into collection container - Integrated coolant system with paper band filter - Complete with deep hole drilling tool and technical documentation Transport possible with standard truck

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 00-1646/1, globina vrtanja: 700 mm, teža obdelovanca (maks.): 10.000 kg, potovalna razdalja osi X: 1.670 mm, pomik osi Y: 1.040 mm, pomik po osi Z: 1.250 mm, največja hitrost vretena: 6.000 obr/min, hitro pomikanje X-os: 15 m/min, hitri pomik os Y: 15 m/min, hitri pomik na osi Z: 15 m/min, vrsta vhodnega toka: trifazni, obremenitev mize: 10.000 kg, pomik osi W: 440 mm, Oprema: transportni trak za ostružke, • Proizvajalec: Buck Maschinenbau GmbH !!! Posebna cena 95.000 !!! • Številka stroja: 00-1646/1 • Delovno območje (mm): X 1600, Y 1200, Z 1600 • W-os: 500 mm, B-os, A-os nagibna do 19° • Popolna ohišja stroja • Transporter odrezkov in visokotlačni hladilni sistem • Orodni vpenjalec SK50 • Krmiljenje Heidenhain TNC 430 Laedpfou Hzqcsx Ah Dsh • Obremenitev mize: 10 ton teže obdelovanca • Hitrost vrtenja vretena: 4.000 obratov na minuto • Hitri pomik: 20 m na minuto • Menjalec orodij za 20 orodij • Stroj je mogoče kadarkoli ogledati v delovanju po predhodnem dogovoru

Stanje: rabljeno, Leto izdelave: 1985, Core drilling diameter - max. 18 mm Drilling depth 320 mm Swing diameter mm Total power requirement 33 kW Machine weight approx. 6 t Space requirement approx. m GILDEMEISTER & KNOLL / TBT Horizontal 2-spindle deep hole drilling machine Model 2 M 01-2-320 Year of manufacture 1985 / 1999 retrofitted and modernized by TBT Drilling - solid drilling approx. 1 - 18 mm Drilling - reaming approx. 25 mm Laodot Hwvaspfx Ah Djh Drilling depth 320 mm Centre height over bed/table 150 mm Stroke of drilling slide max. approx. 500 mm Stroke of positioning slide (linear guides) 500 mm Spindle distance 125 mm Drilling feed/rapid traverse stepless approx. 35 - 1,000/7,000 mm/min Centre distance between spindles approx. 125 mm Spindle speeds FORTUNA HF spindle up to max. 24,000 rpm (800Hz) Total drive of the complete machine approx. 33 kW - 400 V - 50 Hz Weight approx. 6,000 kg Accessories / Special equipment: - Machine currently set up for high-precision drilling of injection pump components (approx. Ø 25 x 150 mm, bore approx. 5 mm) which are fed via an inclined conveyor into a dual-orientation station, positionally checked, and then automatically and in pairs clamped in the machining zone between drill bushing carrier and powered tailstock via a loading portal (with 2 x double grippers) mounted transversely to the machine. After machining, the second set of grippers transfers the workpieces to a blow-off and drill breakage inspection station. After successful inspection, the workpieces fall into transport containers. - Sequence programming and monitoring via SIEMENS OP 17 PLC control. - 2 cooled and oil mist lubricated high-frequency spindles, make FORTUNA, approx. 2/3.5 kW power - Drilling slide feed via GS motor and ball screw - Separate drilling oil unit, approx. 1,500 litres, with various pumps and a sophisticated band filter cleaning system - Separate hydraulic unit approx. 10 kW - Separate BKW cooling unit for spindle and hydraulic oil cooling - 2 separate control and switch cabinets, CE marked Condition: Good to very good - ready for demonstration soon Delivery: Ex stock - as inspected Payment: strictly net - upon receipt of invoice

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 6207 20.57, teža obdelovanca (maks.): 3.000 kg, največja hitrost vretena: 4.000 obr/min, dolžina mize: 1.675 mm, širina mize: 700 mm, hod vretena: 1.000 mm, TEHNIČNE PODROBNOSTI Hodi premikov in gibanje vretena Premik pinole z: 1.000 mm Vrtalna enota vertikalno: 800 mm Premična stojala v smeri vrtanja w: 1.100 mm Miza in osi Prečni pomik mize x: 1.000 mm Velikost mize: 1.675 x 700 mm Obremenitev mize: 3.000 kg Vreteno in obdelava Vpenjalo orodja: SK40 Hitrost vretena: 100 do 4.000 min⁻¹ Vrtalna zmogljivost jeklo: 32 mm Rezanje navojev: M24 PODROBNOSTI STROJA Lasdpfx Ahjw Elrvs Deh Priključek: 7,5 kW Dimenzije in teža Teža: 4,8 t Zunanje mere: 3.500 x 6.000 x 2.400 mm Transportne mere brez ohišja: 2.400 x 6.000 x 2.400 mm

Stanje: rabljeno, Stroj za globoko vrtanje TBT T10-2-500 Lodjxbtznopfx Ah Doah

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 106882-11, skupna dolžina: 4.400 mm, skupna širina: 1.700 mm, skupna višina: 2.700 mm, skupna masa: 7.000 kg, The drilling method of the deep hole drilling machine is the single-lip drilling process. Drilling unit information: - Drilling depth: 200 mm - Min./max. drilling diameter: 1–12 mm based on ST 60 - Number of spindles: 2 - Spindle center distance: 200 mm - Spindle drive: 2 x 2.4/4.2 kW - Spindle speed, stepless: 1,000 – 20,000 rpm - Feed rate, stepless: 10 – 25,000 mm/min - Rapid traverse: 25,000 mm/min - Slide travel (nominal): 650 mm - Slide width: 460 mm - X-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min - Y-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min Fluid information: - Coolant supply: deep-hole drilling oil - Tank capacity: 500 liters - 1x automatic filter, filter capacity: 50 l/min - 1x control filter - 2x ELB drilling oil supply - 1x flow divider - 1x air cooler with circulation pump - 1x electrostatic oil mist extraction - 1x scraper belt chip conveyor - 1x hydraulic and pneumatic power unit/system - 1x sump pump - 3x submersible pumps - 1x radial piston pump with remote adjustment: Delivery rate: 1–38 l/min Pump drive: 7.5 kW Spindle unit: - Motor spindles with frequency-controlled stepless speed adjustment - Spindle head with connection for tool holder - 2 x tool holder for setting sleeves to VDI 3208 SE10x60, screwed onto the spindle head of the motor spindle Guide bush carrier: - The guide bush carrier is referenced via the NC axis - Cast design, mounted on linear guides - Drive for W-axis using AC servo motor and ball screw with indirect, absolute position measuring system Workpiece carriage: - The workpiece carriage is designed as a cross-slide for vertical and horizontal positioning of the workpiece, for mounting fixture plates or special clamping devices - Base body in cast design with linear roller guides - Drive for X and Y axes by AC servo motors and ball screws - Direct, absolute position measuring systems. Clamping/radial slot on table plate Clamping table with NC rotary table for positioning: - With rotary and swivel axes - Hydraulic clamping on both rotary and swivel axes Technical data: - Swivel range: 270° - Rotary range: 360° Laedpswh Rp Ejfx Ah Dsh - Center height: 25 ± 0.02 - Spindle distance: 200 ± 0.005 - Indexing accuracy: rotary axis ± 15" / swivel axis ± 30" Electrical equipment information: - 1x drilling process monitoring - 1x CNC control 840D (Solution Line) Connection data: - Operating voltage: 3AC 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 25 kW Machine auxiliary equipment: - 2 x holder for spring-loaded guide bush, arranged on the guide bush carrier - For max. drilling diameter Ø 18 mm

Stanje: rabljeno, Leto izdelave: 2007, Mach. No.: 106 369-11 Ljdjwizn Ujpfx Ah Doah Drilling diameter: 3 - 65 mm Number of spindles: 1 Total power requirement: 45 kW Very good condition. Siemens control system: Siemens Sinumerik Accessories included. Weight: 45 t Suitable for deep hole drilling and milling Tools and long deep hole drilling tools can be changed fully automatically +++++ Please note that the machine is dismantled and ready for loading. For this reason, a demonstration under power or the creation of a video is not possible. In addition, our listing contains the most representative and highest quality photos possible. Unfortunately, it is not possible to send additional images. +++++

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1986, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 308-600-1716, globina vrtanja: 600 mm, hitrost vretena (min.): 1.423 obr/min, premer vrtanja: 65 mm, višina središča: 299 mm, TECHNICAL DETAILS Boring Unit Drilling System: BTA + Ejector Speed Steps: 8 or 16 with gear change Feed Range: 0 – 500 mm/min Rapid Traverse, forward/backward: 5,000 mm/min Spindle Mount: DIN 55022, Size 6 Main Drive Three-phase Motor: 37 kW, 1,500 rpm Laodowx E N Ispfx Ah Deh Frequency Control: available Spindle Speeds Range I: 16/180 – 200/230 – 290/330 – 370/430 rpm Range II: 550/620 – 740/800 – 990/1,120 – 1,280/1,450 rpm Feed Drive Servo Motor: 10 Nm, 3,000 rpm Ball Screw: MH 50 × 10 × 14 Coolant System Total Power Requirement: 73 kW Coolant Pump: MSDA 40-R38, SMDA 80-R46 Magnetic Filter Candles: MFK 400 R Liquid Cooler: DKL 7 Magnetic Tube Filter: 54 572 71 104 Immersion Pump: TB 405/390 Centrifuge: Polar U6 MACHINE DETAILS Dimensions and Weight Machine Weight: approx. 6,000 kg Paintwork Color: RAL 6011 EQUIPMENT Clamping fixture with sliding drill bushing Clamping fixture with drill bushing holder Clamping fixture with clamping table Clamping fixture with tailstock center Clamping fixture with centric clamping stock ZS2 (HICO) Force measurement device KIMISIT 0 – 30 Hydraulic power unit HS04-C807-6-0 Chip conveyor SEW RF 430T71D4 Centrifuge Hanning ZG 52x6K.137 Fans Dietz DR 80a 69 Lubrication pump Vogel DM7 Control unit for main and feed drives

Stanje: rabljeno, Leto izdelave: 1996, Core drilling diameter – max. 25 mm Drilling depth 1000 mm Swing diameter mm Total power requirement 25 kW Machine weight approx. 12.5 t Space requirements approx. m T B T CNC-controlled horizontal deep hole drilling machine Type BWP 250 Year of manufacture 1996, mechanically and electrically overhauled in 2006 _____ Working area: X-axis = Drilling carriage column approx. 2,000 mm Z-axis = Drilling carriage stroke approx. 1,200 mm Drilling depth with 2 steady rests approx. 1,000 mm Y-axis = Drilling carriage vertical stroke approx. 1,100 mm Table clamping area: 1,200 x 2,000 mm Drilling capacity - Ø solid material approx. 4 – 25 mm Tool holder HSK 50 Spindle speeds: 1,260 – 15,000 rpm Feed rates/rapid traverses for Z/X/Y axes Infinitely variable: 100 – 10,000/15,000 mm/min Feed drive power: 27 Nm / 1000 daN Spindle drive power: 7 kW Total drive approx. 30 kW – 400 V – 50 Hz Weight approx. 10,000 kg Accessories / Special features: – Ideal machine for complete machining of larger workpieces, die forms, plates, etc. using deep hole drilling Ø 25 x 1,000 deep, milling up to Ø 65, slot milling up to Ø 30, spiral drilling/boring up to Ø 30, countersinking and thread cutting up to M 24 x 3. – SIEMENS 840 D 4-axis CNC path control with process monitoring, etc. – High-frequency drilling spindle by GAMFIOR with infinitely variable spindle speeds. – Pneumatically actuated (200 mm) drill bush holder, swivels in 2 positions. – Stationary 12-position tool changer by MIKSCH, type CTM 40 with 800 mm stroke for holding twist drills, milling cutters, and tap tools; switching between ELB deep hole drills and standard tools is manual. – Table is stationary for high workpiece weights and accurate drilling. – On the table: FIBRO CNC rotary indexing table type RTN 400 = 420x420 as B axis – For mounting on the table: hydraulic FIBRO rotary indexing table, Ø 1,000 mm, indexing 3 – 144 or angle settings 2.5 – 120° – Large coolant system, approx. 11 kW pump with scraper conveyor and various filters – 2 steady rests for supporting deep hole drill shafts – Complete work area enclosure with lateral and frontal access Condition: very good – a truly rare opportunity, will soon be available for demonstration under power Delivery: ex-stock here Payment: strictly net – upon receipt of invoice We look forward to your order. For further questions, we are at your disposal. Lasdpfxet Hw Aye Ah Djh

Stanje: rabljeno, Deep Hole Drilling Machine for 10 Meter Deep Holes Kramatorsk KJ1910 Drilling depth: 10 meters Heavy-duty: 25 tons per piece Deep hole drilling machine Robust: Max. workpiece weight 25 tons Spindle motor power: 85 kW Counter-rotating motor: 90 kW Spindle bore diameter: 700 mm Max. drilling diameter: 600 mm Center height over bed: 670 mm Max. external workpiece diameter: 1300 mm Workpiece length range (one-sided machining): 1000 ... 10000 mm Workpiece diameter range: (specify additional values if necessary) Overall machine dimensions: approx. 31 x 3 x 2.3 meters Machine weight: approx. 90,000 kg Laodpfx Aehcxvxsh Deh Machine available in our warehouse (I-25064 Gussago - BS - Italy)

Stanje: rabljeno, Stroji za globoko vrtanje TBT T30-3-500 Lodpsxbtzhefx Ah Djah

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 106 155 - 11, (Please state your offer price) Sales only within Europe, including Turkey Price without packaging; Delivery condition: FCA (machine location) ===== For technical specifications, please refer to the attached handout. All warranties are excluded. We assume no liability for the accuracy of technical data and year of manufacture, for the completeness of accessories and tooling, or for compliance with all safety and environmental protection requirements stipulated in accident prevention regulations. Laodpfx Asw Agqhoh Doh No sales to private individuals.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2287, globina vrtanja: 1.200 mm, dolžina podajanja os X: 1.600 mm, dolžina pomika po osi Y: 560 mm, teža obdelovanca (maks.): 5.000 kg, TECHNICAL DETAILS CNC Control: Siemens Sinumerik 805M Drilling Range Solid drilling range (single-lip): Ø 3–30 mm Boring range (single-lip drilling): Ø 40 mm Drilling depth (Z-axis): max. 1,200 mm Travel Paths Horizontal cross travel (X-axis): max. 1,600 mm Vertical travel (Y-axis): max. 560 mm Depth travel (Z-axis): max. 1,200 mm Horizontal longitudinal travel (W-axis): max. 500 mm Lasdpfx Ahsu Td E Hs Deh Table Table width: 1,200 mm Table length: 1,200 mm Table movement (Z-axis): max. 500 mm Table load: max. 50,000 N Workpiece weight: max. 5,000 kg

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, globina vrtanja: 1.000 mm, Bosch CC100 Steuerung Ledpfou Ef A Tex Ah Djah Werkzeugaufnahme SK40 Max. Bohrtiefe 1000 mm Max. Bohrdurchmesser 4–25 mm

Stanje: rabljeno, Leto izdelave: 1990, Core drilling diameter – max. 6 mm Drilling depth 350 mm Swing diameter mm Total power requirement 15 kW Machine weight approx. 3500 kg Space requirements approx. 5000 x 1200 x 2200 mm Lsdpfxst Hw A Tj Ah Djah TECHNICAL DATA: Drilling diameter – solid drilling approx. 1 - 6 mm Drilling diameter – reaming approx. 10 mm Drilling depth 350 mm Centre height over table 170 mm Installation length between quill head and fixed drill steady 500 mm Installation length between tailstock and fixed drill steady 450 mm Quill maximum stroke approx. 450 mm Tailstock quill stroke 40 mm Tailstock traverse on table 450 mm Table size approx. 400 x 680 mm Stepless feed rate 20 - 850 mm/min (!) Rapid traverse approx. 7,000 mm/min Stepless spindle speeds 5,000 - 12,000 - 24,000 rpm (!) Working spindle drive approx. 4 kW * Total drive approx. 15 kW - 380 V - 50 Hz Weight 3,500 kg * Space required approx. 5,000 x 1,200 x 2,200 mm Accessories / Special equipment: The high-frequency drilling spindle is housed in a rectangular quill which executes the drilling feed as well as the rapid retraction. This enables significantly higher feed and rapid traverse speeds, and also makes the travel paths of the drilling tool considerably shorter. Drilling in small diameter ranges is thus far more economical. The HF spindle is a GMN spindle type TSSV 120 S, oil-cooled, controlled via REFU Hydraulic workpiece clamping tailstock, motorized drive approx. 0.8 kW, stroke approx. 40 mm, tailstock quill speed max. 360 rpm, traversable on the table approx. 450 mm in longitudinal direction. Large drilling oil system mounted to the machine with high-pressure pump approx. 100 bar and 5.5 kW output, tank capacity approx. 250 liters with recirculating pump and band filter unit (10 μm fleece), coarse chip collector Control panel with KM pressure display and effective current display, and with digital readout of spindle speed, feed rate, and coolant temperature; potentiometers for stepless spindle speed and feed value input. Drilling depth/travel/return stroke are input electronically via keypad. Plus various fault indicator lights, sequence controlled via SIEMENS S 5-100 U control system. Complete sound-insulated machine enclosure with sliding doors for quick workpiece and tool (collet chuck) change. Various small-diameter drilling tools included.

Stanje: rabljeno, Stroj za globoko vrtanje SIG BEM8/0.25 Laedpfexbtzbex Ah Dsh