Stroj za vrtanje globokih lukenj

TBT ML 200-2-850

Stanje: dober (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, Machine repainted in white in 2014 (per SIEMENS ENERGY specification) Technical Data Working Area - Max. swing diameter over bed: 570 mm - Max. swing diameter over cross slide: 365 mm - Max. turning length: 1500 mm - Centre height over flat bed: 280 mm - Max. workpiece weight: 400 / 1000 kg - Max. clamping length: 1300 mm Spindle - Spindle head as per DIN 55027, size 8, internal taper 70 - Spindle bore: Ø 62 mm - Spindle diameter in front bearing: 100 mm - Spindle length (depth): 200 mm - Max. chuck diameter: Ø 315 mm - Speed range: 3–2500 rpm - Max. faceplate diameter: Ø 560 mm Kodpfox Ahx Dsx Aqgjlw - Max. faceplate speed: 700 rpm - Max. torque: 1800 Nm Cross Slide – Travel - Longitudinal travel (Z-axis): 1160 mm - Cross travel (X-axis): 345 mm - Tool system Parat-3 - Tool size DIN 770 (h x b): 32 × 25 mm Tailstock - Manual tailstock adjustment - Quill taper: MK5 - Quill diameter: 80 mm - Quill stroke: 190 mm Accessories / Special Equipment - Control: SINUMERIK 810 D - 32-bit processor, digital control - ManualTurn with cycle support - 10.4’’ colour LCD monitor - Operating manual 094.0003.1330-00 - 3-jaw chuck Ø 315 mm - Faceplate Ø 350 mm (up to Ø 560 with thin plates) - Radius turning - Turret: Parat size 3, 4-position, 4 × 90° manual indexing - Chip conveyor Bürener Maschinenfabrik - Particularly suitable for: see manufacturing range Cycle lathe DUS560TI (APL 11301) Includes one combined 4-jaw Wescott chuck with fitted jaw set A tool holder (Tripan) is installed – without tools or tool holders One fixed steady rest Chip conveyor with coolant tank and integrated pump The machine is in operation. Currently, no significant defects or limitations in use are known. Operating manual is available. An internal assessment inspection report from 2017 and the machine data sheet are attached.

Stanje: novo, Leto izdelave: 2025, obratovalne ure: 1 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 4.000 mm, pomik osi Y: 1.000 mm, pomik po osi Z: 1.000 mm, proizvajalec krmilnikov: STYLE CNC Machines, število mest v zalogovniku orodij: 24, proizvajalec motorjev: FANUC, Dostava po dogovoru Ref: 24F048 Leto izdelave: 2025 Stanje: Razstavni eksponat Specifikacije: - X-os: 4000 mm Kodpfxsw Ty S Se Aqgelw - Y-os: 1000 mm - Z-os: 1000 mm - Glavni motor 26 kW (S6) - 8000 vrt/min - BT-40 - Avtomatski menjalec orodij (24 pozicij) - Oddaljeni servis (IXON) + mrežna povezava - Močnejša črpalka za hladilno tekočino z brizgalno pištolo - Nadgrajeno na najnovejšo razpoložljivo programsko opremo STYLE

Stanje: dober (rabljeno), Centre bore: 2-50 mm Workpiece diameter: 8-125 mm Workpiece length: 50-1000 mm Grinding wheel speed: 13,000-45,000 rpm Various accessories Ksdpfx Ajrivlujqgolw MARCELS MASCHINEN AG

Stanje: rabljeno, Leto izdelave: 2026, obratovalne ure: 15 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 204065, skupna širina: 2.900 mm, skupna višina: 3.300 mm, Rabljeni stroj CNC-rezalnik/plotter, rezalna površina v X in Y osi: 2.500 x 2.100 mm Multifunkcijski CAM sistem za razrez v CNC-nožni tehnologiji za 2D razrez usnja, blaga, tehničnih tekstilij, pene in drugih ploščatih, pol-fleksibilnih ali togih, nemetalnih materialov. Oprema rabljenega stroja: • 1 rezalni most in 1 multifunkcijska orodna glava Stroj se prodaja z gnanim krožnim nožem, električno oscilirajočim nožem in rezkalnikom (vključno z odsesovalno enoto) • Multifunkcijska orodna glava za namestitev do 3 izmenljivih orodij • Zmogljiv vakuumski ventilator za fiksiranje materiala • Standardno opremljen s sivo transportno mizo (conveyor). Možna menjava v zeleno-modri conveyor, ki nudi visok kontrast za temne materiale. Dodatna orodja (na zahtevo): • EOT električni oscilirajoči nož • POT pnevmatski oscilirajoči nož • PRT gnani krožni nož • UCT univerzalni nož (vlečni nož) • KCT polrezi orodje (Kiss-Cut-Tool) • CTT orodje za utore • V-Cut kotni rezalnik • Prepoznavanje tiskarskih oznak • Kamera za registracijo • Orodje za štancanje zarez ali lukenj • Rezkalnik z odsesovalno enoto Enostavna uporaba • Lahko izmenljiva rezalna orodja »PLUG & CUT« • Intuitiven uporabniški vmesnik • Preprosta menjava rezil • Aktivacija vakuumskih con s klikom Hitro povračilo investicije • Nizki stroški ob visoki dodani vrednosti • Optimalna izraba materiala z nest expert programski moduli (ni vključeno v opremo) • Visoka hitrost • Stalna natančnost Podatki: • Kratki časi rezanja zaradi visoke pozicijske hitrosti do 90 m/min • Ponovljivost +/- 0,25 mm • Reže enojne ali večplastne sloje • Primeren tako za ploščaste kot za rolo materiale (možna nadgradnja z ustreznim odvijalcem) • Hitro povračilo investicije (Primer fotografije izdelka) Stroj je CE-certificiran. Klsdpfx Aqeif Ek Rsgsw

Stanje: dober (rabljeno), Leto izdelave: 2016, Größe des Tisches: 3000 x 1700 mm Verfahrwege (X/Y/Z): 3200 x 2100 x 920 mm Kedpfewu Dlasx Aqgslw Tischbelastung: 11.000 kg Abstand Spindelnase – Tisch: 164 – 1084 mm Spindelaufnahme: DIN 50 Spindeldrehzahl: 6.000 min⁻¹ (U/min) Werkzeugwechsler: 40 Stationen (ATC) Steuerung: Hurco Winmax 5 Späneförderer

Leto izdelave: 1996, stanje: pripravljen za uporabo (rabljen), Turning length: 450 mm, spindle bore: 65 mm, spindle speed: 4,000 rpm, main spindle/sub-spindle power: 18.5 kW/11 kW, tool stations: 10, driven tools: 10, hydraulic capacity: 150 l, hydraulic pressure: 60 bar, connected load: 39 kW. Rapid traverse X1/X2: 15 m/min, feed force: 5,000 N, feed travel: 140 mm. Rapid traverse Z1/Z2: 30 m/min, feed force: 8,000 N, feed travel: 450 mm. Rapid traverse Y1: 6 m/min, feed force: 8,000 N, feed travel: +/-35 mm. Machine dimensions X/Y/Z: approx. 4,150 mm/2,000 mm/1,800 mm, weight: approx. 4,750 kg, control: Traub System TX 8F, operating hours: 78,825 h. Documentation available. On-site inspection possible. Klodev Scrhjpfx Aqgsw

Stanje: dober (rabljeno), Leto izdelave: 1998, Max. pitch circle diameter external gearing: 300 mm Max. pitch circle diameter internal gearing: 300 mm Kledpjvu E Nuefx Aqgew Max. outside diameter of workpiece (fixture): 450 mm Module - max.: 6 Max. gear width: 100 mm Max. helix angle (with tool Ø 125 mm): +/- 45° Stroke rate - infinitely variable: 130 - 1300 strokes/min Workpiece weight: 1000 kg Minimum distance table surface - tool spindle: -55 / +300 mm Maximum distance table surface - tool spindle: 200 mm Maximal distance table surface - tool spindle: 350 mm Manual column lateral displacement: +/- 25 mm Manual swivel angle of the tool spindle: +/- 0.5° Max. tool speed: 15 rpm Max. workpiece speed: 27 rpm Max. tool diameter: 7 in Voltage: 400 V Frequency: 50 Hz Max. mains current: 70 A Total power requirement: 48 kW Machine weight approx.: 11 t Space requirements approx.: 4.27 x 3.11 x 2.87 m Main spindle taper: SK 45 Table bore: 40 mm Control: Siemens Sinumerik 840 C Gear shaping machine: Gleason PFAUTER Mod. PSA 300 CNC modular gear cutting machine with shaping cutter for the machining of external and internal cylindrical gears, with straight or helical involute gearing as well as any other profile achievable via generating or form shaping processes. The machining cycle is controlled by a CNC unit, equipped with dedicated gear cutting software. Application scope --> The PSA 300 is designed for manufacturing: - Gears with straight external toothing - Gears with straight internal toothing - Gears with external helical gearing - Gears with internal helical gearing

Stanje: rabljeno, Leto izdelave: 1992, hitrost vretena (min.): 7.500 obr/min, največja hitrost vretena: 24.000 obr/min, 4 motor-driven grinding spindles (liquid-cooled, with purge air / oil mist lubrication) including the REFU HF frequency converter, e.g., suitable for powering the spindles of a Voumard 400 CNC T4. Grinding spindle GMN TSSV 170-7500 7,500 rpm, 350V, 19.3A, 7.5kW, 250 Hz Grinding spindle Voumard BM15-170 15,000 rpm, 350V, 35A, 18kW, 250 Hz Grinding spindle Voumard BM18-15032 18,000 rpm, 350V, 28.5A, 12kW, 600 Hz Grinding spindle Voumard BM24-150 Klsdpfx Aqjl Tn Afsgow 24,000 rpm, 350V, 27A, 12kW, 800 Hz REFU HF Frequency Converter 316/25 High-frequency converter (inverter, frequency converter) Frequency converter, frequency inverter for powering motor spindles GMN tool spindle, motorized grinding spindle The spindles are fully functional but are sold without warranty – year of manufacture approx. 1992. A batch of various grinding spindle shafts / arbors for grinding wheels is available for these spindles and can be purchased separately. Price / details on request. All technical data subject to errors and misprints. We sell exclusively to countries of the European Community.

Stanje: rabljeno, Leto izdelave: 1980, številka stroja/vozila: A-07/471A, Sheet width - max.: 130 mm Straightening roller diameter: 40 mm Number of straightening rollers: 5 Feed rollers: 2+2 Sheet thickness - min.: 0.4 mm Sheet thickness - max.: 3.5 mm Weight: 0.4 t Space requirement approx.: 0.6x0.65x1.15 m Ksdpfscxxx Rox Aqgolw Strip straightening machine with integrated infinitely variable VARI drive, forward and reverse operation, mode selector switch for manual and automatic operation, entry roller basket, position display of the straightening rollers via analog display, adjustment of straightening roller positions via handwheels, automatic loop control, very good condition

Leto izdelave: 1993, stanje: dober (rabljeno), številka stroja/vozila: 03.2370, Manufacturer: Arthur Klink Model: RISZ 10 x 1000 x 400 Year of manufacture: 1993 Weight: 6,500 kg (total) Machine No.: 03.2370 General / Technical Data: Used vertical hydraulic internal broaching machine with automatic workpiece feed for 2 workpieces, in good condition Pulling force: 10,000 kg Broaching length: 1000 mm Broaching stations: 3 units Distance between broaching stations: 125 mm Draw head holder diameter: 3 x Ø 80 mm Clear width between cylinders: max. 435 mm Ksdocc D Ddopfx Aqgelw Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 10.9 m/min Return speed: hydraulically infinitely variable from 5 up to max. 27.5 m/min Machine dimensions (W x D x H): approx. 5500 x 2800 x 4900 mm Power supply / connected load: 380 Volt, 50 Hz / 38 kW Accessories / Special Equipment: The machine is equipped with a workpiece table and a traverse support for 3 broaching stations. Furthermore, the machine features an automatic workpiece feeding system for 2 workpieces. Clamping of the shank and end-piece holders is hydraulic. The machine includes a coolant system with an integrated magnetic chip conveyor, enabling operation without the need for a special foundation (pit). Remarks: The machine is designed for use in large-scale series production. It is in very good condition and still has its original paint. The machine can be inspected under power in our warehouse.