CNC center za struženje in rezkanje

Gildemeister CTX 510 CTX 510

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, 600 kg load capacity height-adjustable welding positioner with through bore 100 - 200 mm Table diameter 700 mm Fedpfxed Anz Rj Acdjgf Horizontal height min. 0.65 m, max. 1.25 m Tilted height min. 0.45 m, max. 0.95 m Speed from 0.01 – 1.1 rpm Tilting angle up to 135° Hand and foot remote control with speed display Very robust construction

Stanje: rabljeno, Leto izdelave: 1980, številka stroja/vozila: A-07/471A, Sheet width - max.: 130 mm Straightening roller diameter: 40 mm Number of straightening rollers: 5 Feed rollers: 2+2 Sheet thickness - min.: 0.4 mm Sheet thickness - max.: 3.5 mm Weight: 0.4 t Space requirement approx.: 0.6x0.65x1.15 m Strip straightening machine with integrated infinitely variable VARI drive, forward and reverse operation, mode selector switch for manual and automatic operation, entry roller basket, position display of the straightening rollers via analog display, adjustment of straightening roller positions via handwheels, automatic loop control, very good condition Fgsdpfecxxx Rox Acdof

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, obratovalne ure: 40.255 h, Funkcionalnost: popolnoma funkcionalen, For sale is a DMG DECKEL MAHO DMF 220 linear, a 5-axis universal machining center in travelling column design. The machine was built in 2008 and underwent a complete retrofit in 2022, featuring an upgrade to Siemens Sinumerik 840D Solution Line. Equipped with: - 5-axis simultaneous operation license - Siemens Sinamics drive technology - Siemens OP15 Black Operator Panel - MCP control panel and electronic handwheel Technical Specifications: Manufacturer: DMG DECKEL MAHO Model: DMF 220 linear Type: 5-axis universal machining center / travelling column machining center Year of manufacture: 2008 Control: Siemens Sinumerik 840D Solution Line Retrofit / Modernization: Siemens CNC & drive retrofit 2022 5-axis simultaneous operation: license available Serial number: 15115223244 Machine number: 2499093 Travel X: 2,200 mm Travel Y: 560 mm Travel Z: 720 mm Tool holder: SK 40 Table load capacity: 2,500 kg Main spindle speed range: 20 - 14,000 rpm Connected load: 80 kVA Max. rated current: 115 A Protection: 125 A Fsdpeyuzg Hofx Acdjgf Mains voltage: 400 V Frequency: 50 Hz Control voltage AC: 230 V Control voltage DC: 24 V Power-on hours: approx. 40,255 h Spindle / operating hours: approx. 13,082 h CNC / Drive technology: X axis: Siemens Sinamics 160 A, 2x SMC20 encoder module Y axis: Siemens Sinamics 50 A, 2x SMC20 encoder module Z axis: Siemens Sinamics 80 A, 2x SMC20 encoder module B axis: Siemens Sinamics 25 A, 2x SMC20 encoder module A axis: Siemens Sinamics 25 A, 2x SMC20 encoder module Spindle axis: Siemens Sinamics 26 kW, 2x SMC20 encoder module Operator panel: Siemens OP15 Black Operator Panel MCP keypad: Siemens Electronic handwheel: Siemens Magazine technology: Magazine A: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Magazine B: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Magazine C: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Software / Licenses: - 5-axis simultaneous operation license - Axis licenses - Operator software license Equipment: - Integrated rotary table / swiveling bridge structure - Paper tape filter system - Coolant / filter unit - Electrical cabinet - Full enclosure - Work area lighting - Siemens operator console Condition: - Machine is in well-maintained condition - Upgraded Siemens control and drive technology - 5-axis simultaneous operation available

Stanje: rabljeno, Leto izdelave: 1997, The press brake was manufactured in 1997 in England at the EDWARDS PEARSON factory. The bending press is in good condition and is being sold complete with tooling. It has always been serviced and maintained on schedule. The machine is connected and can be demonstrated or inspected on site. Specification: Model: EDWARDS PEARSON 100/3100 PR6 Year: 1997 Working length: 3,100 mm Bending force: 100 t Stroke: 172 mm Distance between table and frame: 450 mm Fodperfx Utsfx Acdsgf Working speed: 100 mm/s Return speed: 110 mm/s Axes: auto X1, X2, Y1, Y2, Z1, Z2, R Tooling: Included Weight: 7 t Other: Newly replaced display, connected keyboard for easier operation. If you have any further questions, we will be happy to assist you.

Stanje: rabljeno, barva: rumena, prva registracija: 01/1995, * Manufacturer: HYSTER * Model: H2.50XM * Serial No.: D177B22181S Fjdpfsi Tfapex Acdogf * Attachment: S/S 2.00-1.50 1067 mm * Year of manufacture: 1995 * Drive: Diesel * Operating hours: 18,151.8 h * Unladen weight: 4,265 kg * Back tilt: 6 degrees * Tyre size: 7.0 x 12 (front), 6.0 x 9 (rear) * Tyre pressure: 0 (front / rear) * Track width: 1,125 mm * Rated capacity with upright mast and specified attachment * Lift height: 5,550 mm * Load capacity: - 2,040 kg at 500 mm load center - 1,860 kg at 600 mm load center - 1,710 kg at 700 mm load center * Subject to change, prior sale, and errors excepted.

Leto izdelave: 2019, obratovalne ure: 4.525 h, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 12, STROJ ZA LUŠČENJE IN RAVNANJE PALIC V KOMPLETU Oprema je v brezhibnem delovnem stanju in jo je mogoče preizkusiti pod napajanjem. Popolnoma prenovljena leta 2019 (popolnoma nova mehanika in elektronika). Delovno območje: Ø 20 – Ø 80 mm Dolžina palic: 2,5 – 6,0 m Obdelovalna toleranca: ISO h9 (možna tudi h8) Globina luščenja: do 3,5 mm, odvisno od vrste jekla Vrste jekla: ogljikovo jeklo, ležajno jeklo, vzmetno jeklo ipd. Hitrost podajanja: digitalno nastavljiva 0,5 – 12 m/min Število vrtljajev glave za luščenje: do 1700 min⁻¹ Rezila: dva kompleta po 4 nože z avtomatskim digitalnim pozicioniranjem (trikotni in dolgi noži) Avtomatska nalagalna miza s števcem palic Podajni valj z motoriziranim nastavljanjem višine Vhodni tlačni valji – 4 vertikalni valji z invertnim DC motorjem Stroj za luščenje sestoji iz: - Sprednji vodilni sistem - Glava za luščenje s 4 noži - Zadnji vodilni sistem Voziček za izvlek palic Glavni motor in prenos Izhodni stiskalni valji – dvojni Odlagača miza z motoriziranim nastavljanjem višine Zbiralnik s števcem in avtomatskim prevzemom končanih palic Hidravlična enota – povsem nova Električna omarica – nova, z dvema moduloma. Fgodpfxjwqb Scs Acdef

Stanje: dober (rabljeno), GENERAL CHARACTERISTICS Maximum grinding diameter: 120 mm Grinding wheel width: 250 mm Minimum grinding diameter: 1 mm Regulating wheel diameter: 304 mm Grinding wheel diameter: 508 mm DIMENSIONS AND WEIGHT Height: 1,700 mm Width: 1,500 mm Length: 2,750 mm Weight: 4,000 kg Fgsdpfxerpnf Ae Acdof ELECTRICAL SPECIFICATIONS Grinding head motor power: 15 kW Regulating wheel head motor power: 1.8 kW Hydraulic motor power: 1.1 kW Total installed power: 20 kW Voltage: 220/380 V

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Premer vpenjalne glave: 210 mm Maks. premer nihanja nad posteljo: 500 mm Premer vrtenja nad suportom: 290 mm Premer struženja: 200 mm Razdalja med konicama: 700 mm Dolžina struženja: 500 mm Pomik - y: 80 (+/-40) mm Pomik - x: 190 mm Pomik - z: 525 mm Premer ležaja vretena: 100 mm Prehod palice: 65 mm Vrtina vretena: 73 mm Vrtljaji vretena: 6000 min⁻¹ Fgedpezhpamsfx Acdsf Revolverska glava (št. pozicij): 12 Pogon orodja: 4,18 kW Vrtljaji orodja: 5000 min⁻¹ Sistem vpenjanja orodja: VDI 30 Krmiljenje: Siemens 840D Skupna priključna moč: 20 kW Teža stroja: pribl. 4,3 t Dimenzije: pribl. DŠV 2,2 x 4,5 x 1,82 m Zelo dobro vzdrževan stroj iz učne delavnice, ki je bila razpuščena. Obratovalne ure: 14.944 h. Ure vretena: 2.233 h. vključno z zadnjim merilnim protokolom (na voljo na zahtevo) vključno z Y-osjo vključno s C-osjo vključno s cca. 10 držali za orodja (od tega 2 pogonska EWS aksialna in radialna) vključno s 3-čeljustnim vpenjalom SMW vključno s konico konjička vključno z merilno roko vključno s transporterjem za odrezke vključno z roko za izmet delov s transportnim trakom vključno s hladilnim sistemom vključno z dokumentacijo

Stanje: zelo dobro (rabljeno), Popolno skladišče z motorji Skupaj 4 vrste (2 enojni regali in 1 dvojni regal, skladno s priloženimi fotografijami) AC in DC motorji Fedeyz R Egjpfx Acdogf Predvsem motorji 500V Prenovljeni in novi motorji Naprodaj kot ena celota

Stanje: rabljeno, MAZAK QT 20 Model: OT-20-N-K Turret: 8 positions Motor: 18.5 kW Year: 1988 Fjdowulzvjpfx Acdjgf Weight: 11,700 lbs Chuck: diameter 250 mm Renewed operational panel