Vodni-/vlečni vretenasti stružnica, premer struženja nad posteljo 400–499 mm nakup rabljenega (218)

Stanje: novo, Parallel lathe with Fervi T075/400V3A digital readout. Monobloc cast iron bed. Centre height: 230 mm Max. swing over bed: 460 mm Max. swing over carriage: 270 mm Max. swing in gap: 690 mm Tool height: 25 mm Distance between centres: 1500 mm Distance between guides: 300 mm Spindle bore taper: MT7 Spindle bore: 58 mm Spindle nose: Camlock D1-8 Spindle speeds (12): 25–1700 rpm Longitudinal feeds (42): 0.031–1.7 mm/rev Cross feeds (42): 0.014–0.784 mm/rev Metric threads (41): 0.1–14 mm Inch threads (60): 2–112 TPI Tailstock quill stroke: 130 mm Tailstock taper: MT4 Motor: 400 V 50 Hz 5.5 kW Coolant pump: 400 V 50 Hz 90 W Machine dimensions: 2750 x 1080 x 1370 mm Net weight: 2020 kg Total dimensions: 2870 x 1180 x 1570 mm Gross weight: 2200 kg Included accessories: 3-jaw self-centering chuck Ø250 mm / D1-8 4-jaw self-centering chuck Ø300 mm / D1-8 Faceplate Ø350 mm Fixed stead rest Travelling (follow) steady rest Reducing sleeve MT 7/4 Fixed tailstock centre MT 4 Rotating tailstock centre MT 4 Threading dial indicator Quick-change tool post guard Spindle guard Gtslevbqv Hshccqmot Rear splash guard Type B quick-change tool post LED light Coolant system Electromechanical foot brake Carriage gears in oil bath Rapid-lock tailstock carriage

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Centre height: 210 mm Swing over bed: 420 mm Swing in bed gap: 580 mm Swing over cross slide: 250 mm Distance between centres: 1000 mm Spindle nose: D1-6 Spindle speed: 45 – 1800 rpm (16 steps) Spindle bore: 52 mm Longitudinal feed: 0.05 – 1.7 mm/rev (17 steps) Cross feed: 0.025 – 0.85 mm/rev (17 steps) Metric threads: 0.2 – 14 mm (39 steps) Whitworth threads: 2 – 72 TPI; (45 degrees) Module threads: 0.3 – 3.5 MP, (18 steps) Tailstock quill diameter: D50 mm Tailstock quill stroke: 120 mm Tailstock taper: MK4 Power: 3.3 kW/400 V Machine weight: 1270 kg Dimensions (L x W x H): 1940 x 850 x 1320 mm Gtelox Rt Euehccqmst Equipment: - 3-axis digital readout system - Fixed steady rest - Travelling steady rest - 3-jaw chuck fitted, D200 mm - 4-jaw chuck D250 mm - Drill chuck safety guard with safety switch - Rear splash guard - Tailstock - Coolant system - Chip tray - Toolpost guard - Longitudinal stop - Halogen work lamp - Emergency stop button - CE marking - Machine documentation The machine is a brand-new exhibition model and has 0 operating hours. It comes with a 12-month spare parts warranty.

Stanje: rabljeno, Vodoravni in prečni stružnica TONGIL-SAEILO tip TIPL-4SP Stroj. št. 00570319 Leto izdelave 1985 Razdalja med konicami: 1000 mm Premer struženja nad posteljo: 400 mm Premer struženja nad suportom: 210 mm Višina konice nad posteljo: 200 mm Višina konice nad suportom: 105 mm Vrtina vretena: 58 mm Število obratov vretena: 55 - 1600 min⁻¹, 16 stopenj Pomik: vzdolžni in prečni Notranji konus konjička: MK 4 Prirobnica za vpenjalno glavo: Camlock, velikost konusa 6 Moč motorja: 4 / 6 kW Priključna napetost: 380 V, 50 Hz - Hitrost vretena preko 2 vrtilnih hitrosti motorja in 8 stopenj menjalnika - 3-čeljustna planska vpenjalna glava RÖHM Ø 200 mm s stopničastimi čeljustmi - Hitroizmenljivi nosilec orodij Multifix vel. B z 2 izmenljivima kasetama - Mehanska zavora vretena preko stopalke Gtelhccqex Urbvemjt - Naprava za hlajenje - Nujna ustavitev - Delovna svetilka Potrebni prostor D x Š x V: 2250 x 1050 x 1220 mm Teža: 1500 kg

Stanje: zelo dobro (rabljeno), Prodajam na slikah viden stružnico za obdelavo kovin angleškega podjetja Harrison, model M300. Stroj je v zelo dobrem stanju. Ima novo 160 mm vpenjalno glavo znamke Fuerda. Nameščene so optične letve znamke Sino. Pri preizkusih struženja na 20 cm je bila razlika v premeru 0,04 mm. Cena ni predmet pogajanj. Gelhox Ur Amsccqmstt

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Dražba: Zaprtje obrata Roschmann, Gersthofen (Augsburg) Gtelhox N Nk Deccqmot Ponudite zdaj – prodaja najboljšemu ponudniku. Lot 2910016: Lot vsebuje 1 rabljeni mizni stružnici v zelo dobrem stanju. Minimalni znaki uporabe, dobro vzdrževana. Lastnosti: Model: OPTIMUM TH 3309, največje število vrtljajev: 2000 obr/min, sposobnost rezanja navojev, ročno prestavljanje prestav, vgrajena spodnja omara s predali. Elektrika: 400 V, 50 Hz, 1,5 kW. Teža: 430 kg.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Razdalja med konicama: 1500 mm Višina konic: 220 mm Gtelox S Hynehccqmjt Vretenina odprtina: 52 mm Pinola konjička: MK 4 18 hitrosti vrtenja: 25 - 2000 obr/min Motor s preklopnimi poli: 2,9 / 5,9 kW z vmesnim mostom

Stanje: rabljeno, Leto izdelave: 1990, Skladiščna omara opremljena s 43 držali Višina 2.200 mm Širina 1.200 mm Teža stroja ca. 300 kg +++++ Prosimo upoštevajte, da je stroj razstavljen in pripravljen za nakladanje. Zaradi tega predstavitev pod napetostjo ali snemanje videoposnetka ni mogoče. Gtoljhc Rf Tshccqmet Naš oglas že vsebuje najbolj informativne fotografije najvišje možne kakovosti. Pošiljanje dodatnih slik žal ni mogoče. +++++

Stanje: rabljeno, Tehnične podrobnosti: Gslhccowa I Shjqmstt Premer struženja nad posteljo: 560 mm Premer struženja nad suportom: 280 mm Dolžina struženja: 2000 mm Višina konic: 280 mm Razdalja med konicami: 1600 mm Izvrtina glavnega vretena: 65 mm Območje vrtljajev: 9...1800 / 24 stopenj min⁻¹ Vzdolžni pomik: 0,025-0,09 mm/obrat Prečni pomik: 0,012-0,045 mm/obrat Pomik pinole konjička: 225 mm Priključek konjička: MK5 Skupna priključna moč: 18 kW Teža stroja pribl.: 3,8 t Mere stroja (DxŠxV): 3,7 x 1,6 x 2,05 m Trivpenjalni vpenjalni tulec D=320 mm Zgornji suport vrtljiv ±45°

Stanje: dober (rabljeno), Leto izdelave: 1975, Ponudba 24204 Tehnični podatki: - Največji premer struženja nad ležiščem: 420 mm - Razdalja med konicami: 1000 mm - Vretenina odprtina: mm (ni navedeno) - Konus vpetja pinole konjička: MK 4 - Pomik pinole konjička: 200 mm - Hitrost vrtenja vretena: 40 – 2000 obr/min - Pomiki vzdolžni in prečni - Metrični navojni koraki - Palčni navojni koraki - Modulni navojni koraki - Pogon: 400 V - Vključno z: 3-čeljustni vpenjalni tulec, SWS jekleni nosilec s 3 vložki - Potreben prostor pribl. Š 2800 x V 1250 x G 950 mm - Teža pribl. 2200 kg Gtolhccqox Tqg Ijmjt

Stanje: dober (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Premer vrtenja nad posteljo stroja: 505 mm Premer vrtenja nad prečnim suportom: 270 mm Premer vrtenja v izrezu: 700 mm Razdalja med konicama: 1000 mm Širina postelje: 340 mm Vreteninska odprtina: D77 mm Pogonska moč: 7,5 kW Število vrtljajev: 12,5 - 2000 min⁻¹ Tuljava konjička: MK5 Teža: 2300 kg Dimenzije D x Š x V = 2600 x 1100 x 1525 mm Oprema: - 3-osni digitalni prikaz - Multifix držalo za orodje z vložki - Strojna svetilka Gelhccsxtwvmoqmstt - Luneta - 3-čeljustna vpenjalna glava - Čelna plošča - Zaščita vpenjalne glave - Hladilni sistem - Številna dodatna oprema

Stanje: novo, TC 205 x 1000 Centre height: 205 mm Swing diameter over bed: 410 mm Distance between centres: 1000 mm Bed width: 260 mm Spindle nose: DIN 55029 (Camlock) 9, size 6 Cross slide travel: 220 mm Top slide travel: 125 mm Spindle bore: 52.5 mm Spindle speeds: 20 - 3000 rpm Speed control: Infinitely variable Mechanical speed ranges: 2 Motor power: 3.75 kW Coolant pump: 0.13 kW Longitudinal feeds Z: 0.05 - 1.7 mm/rev Cross feeds X: 0.025 - 0.85 mm/rev Whitworth threads: (45) 2 - 72 TPI Metric threads: (39) 0.2 - 14.0 mm Diametral pitch threads: (21) 8 - 44 DP Module threads: (18) 0.3 - 3.5 MP Tailstock quill diameter: 52 mm Tailstock taper: MT 4 Tailstock quill stroke: 150 mm Dimensions: 2270 x 1120 x 1900 mm Weight, approx.: 1500 kg Features: - Machine tool accuracy according to DIN 8605 - Infinitely variable speed control (2 mechanical speed ranges) - Precision-balanced main spindle - Rigid machine bed with hardened and ground guideways - Monolithic cast-iron base - Adjustable precision taper roller bearings in the main spindle - Easy-to-operate feed gearbox with a wide feed range running in an enclosed oil bath - Low-maintenance central lubrication - Removable gap bridge Scope of delivery: - 3-axis digital readout (resolution 0.005 mm) - 3-jaw chuck - Quick-change tool post with four tool holders - High splash guard with integrated LED trough light - Pull-out chip tray at the front Gtelhcjir If Docqmet - Overload clutch - Fixed steady rest with ball bearing inserts - Travelling steady rest - Micrometer bed stop - Machine pads (1 set of 6 pieces) - Two emergency stop buttons - Foot pedal with dual brake system (mechanical and electrical) - Chuck guard, tool post guard and leadscrew cover with limit switch protection in accordance with European CE safety standards - Coolant system - 2 fixed centres - Reducing sleeve for main spindle - Operating tools - Operating tools in toolbox - Operating manual with spare parts list

Stanje: rabljeno, Leto izdelave: 1998, Premer struženja nad ležiščem: 400 mm Premer struženja nad suportom: 260 mm Dolžina struženja: 1000 mm Višina konic: 200 mm Razdalja med konicama: 1000 mm Gslhcjxp Rzbocqmstt Vpenjalna odprtina vretena: 50,8 mm Hitrosti vretena: 20–3150 min⁻¹ Pomiki vzdolžni sani: 0,01–3,24 mm/obrat Pomiki prečni sani: 0,005–1,62 mm/obrat Teža stroja cca: 1,8 t Prostorske zahteve cca: 2,85 x 1,4 x 1,9 m Obratovalna napetost: 400 V Priključna moč: 7,7 kVA Z vpenjalno glavo, Multifix in digitalnim prikazom.

Stanje: rabljeno, Leto izdelave: 1982, Centre height approx. 150 mm Centre distance 1300 mm Four-jaw chuck included Gelhccsp Icp Ujqmett Diameter approx. 250 mm Digital readout 1x Make: Heidenhain and Werkzeug-Sc Serial number: 63-06

Stanje: rabljeno, Leto izdelave: 1999, Technical Details: Gtolju Ixzbshccqmet Swing diameter over bed: 460 mm Swing diameter over carriage: 388 mm Turning length: 1016 mm Centre distance: 1016 mm Centre height (measured in bed): 230 mm Swing diameter in gap: 640 mm Spindle bore: 52 mm Spindle speed range: 30 - 2000 / 12 steps rpm Feeds – longitudinal: 0.032 - 0.898 mm/rev Feeds – cross: 0.016 - 0.449 mm/rev Tailstock quill taper: MK 4 Tailstock quill travel: 120 mm Total power requirement: 3.75 kW Machine weight approx.: 1.6 t Machine dimensions approx. LxWxH: 2.1 x 1.1 x 1.5 m Switchable gear transmission 3-axis digital readout system Quantum Compound slide adjustment +/-90° Quick-change tool post Multifix 3-jaw chuck, Ø 200 mm Live centre in tailstock Thread cutting: inch threads, metric threads, trapezoidal threads, module threads Accessories: Change gears, machine feet, 1x fixed centre

Stanje: dober (rabljeno), 1 x stružnica z vodilno in pogonsko vreteno Matra MDR 210 Lep stroj iz majhne orodjarne. Golhcsx Rum Tjcqmett Dodatni podatki in slike bodo sledili. Stroj si je možno ogledati pod napetostjo od 13.01.

Stanje: rabljeno, Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Stružnica Pinacho Tip SC 250 Leto 2017 Z digitalnim prikazom Med konicama 1500 mm Popolna Gtolhccjx Ux Dweqmet

Stanje: rabljeno, Premer vrtenja nad posteljo 280 mm Gelsx Ni Dkohccqmstt Premer vrtenja nad podporo 160 mm Dolžina struženja 500 mm Višina konic 140 mm Razdalja med konicama 500 mm Vrtina vretena 36 mm Hitrosti vretena 15 - 3550 min⁻¹ Vretenasti glava DIN 55022 Gr. 5 Pomiki vzdolžno 0,008 - 0,560 mm/obrat Pomiki prečno 0,004 - 0,280 mm/obrat Navoj - mm rastra 0,2 - 12 mm Premer vodilnega vretena 24 mm Nagib vodilnega vretena 6 mm Vpenjalni stožec konjička MK 3 Hod pinole konjička 90 mm Lateralni pomik konjička iz sredine 15 mm Skupna priključna moč 2,2 kW Teža stroja ca. 0,6 t - Stroj iz učne delavnice - Oprema: digitalni prikaz na 3 oseh, 3-čeljustna vpenjalna glava RÖHM 160 mmø, MULTIFIX glava Gr. A, sredinska konica M-št. 4684

Stanje: novo, Condition: New Delivery time: approx. 4 months from order Country of origin: Bulgaria Price: €36,070 Leasing rate: €688.94 Swing over bed: 400 mm Distance between centers: 1000 mm Center height: 200 mm Spindle bore: 52 mm Swing over cross slide: 235 mm Bed width: 320 mm Spindle mount / DIN 55027: No. 6 Spindle taper: 6 M Number of spindle speeds: 12 Spindle speed: 50–2,240 rpm Number of feeds: 80 Longitudinal feed: 0.015–0.6 mm/rev Cross feed: 0.0075–0.3 mm/rev Number of threads: 40 Metric thread range: 0.25–7.5 mm Imperial thread range: 120–4 TPI Module thread range: 0.0625–1.875 DP thread range: 480–16 Cross slide travel: 235 mm Top slide travel: 110 mm Tailstock quill diameter: 50 mm Tailstock taper: MT 4 Tailstock quill travel: 100 mm Motor power: 4 kW Length: 2750 mm Width: 1100 mm Height: 1600 mm Weight: 1540 kg Drive via gear transmission 3-axis digital readout Fagor 40i Multisuisse quick-change tool post incl. 4 holders (3x rectangular, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 200 mm Spindle nose No. 6 as per DIN 55027 Rapid traverse (4 positions) Fixed center Coolant system 1 pcs. flange plate for chuck Ø 200 mm 1 adapter sleeve Rear chip splash guard along the entire length Lead screw and feed rod cover Chuck guard Tool post guard Gtslhsxzuu Aoccqmjt Leveling bolts and plates Tailstock with quick-clamping Low-voltage machine lamp Operating manual Equipment in accordance with "CE" FURTHER TURNING LENGTHS: Turning length 750 mm €35,360.00

Stanje: dober (rabljeno), Leto izdelave: 1974, Razdalja med konicami 1500 mm Maks. premer vrtenja 550 mm Serijska številka 20-08 Dokumentacija da Digitalno da Prehod 88 mm Gelhccoxzu Ddeqmstt Multifix da Lovilne posode

Stanje: rabljeno, Leto izdelave: 2014, Technical Details: Swing diameter over bed: 356 mm Swing diameter over cross slide: 220 mm Turning length: 1000 mm Centre height: 180 mm Distance between centres: 1000 mm Spindle bore: 38 mm Speed range: 45 - 1800 rpm Longitudinal feeds: 0.043 - 0.653 mm/rev, 42 steps Tailstock quill taper: MT3 Tailstock quill travel: 95 mm Total power requirement: 4 kW Machine weight approx.: 0.85 t Gelew D Dcqohccqmett Machine dimensions approx. (LxWxH): 1.92 x 0.8 x 1.49 m (including display unit) Various accessories

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Schaublin 135 High-Precision Lathe with 3-axis K&C DRO (NEW) and Tool Cabinet in Excellent Condition! Gtolhjx I Nkueccqmet Technical Data: >> Machine No.: 252409 >> Centre Height: 135 mm >> Centre Distance: 630 mm >> Swing Over Bed: 315 mm >> Spindle Nose: Camlock D1-4 >> Spindle Bore: 40 mm >> Longitudinal and Cross Feeds: 0.025–0.35 mm/rev >> Metric Thread Pitches: 0.25–14 mm >> Tailstock Morse Taper: MK3 >> Spindle Speeds: 55–3000 rpm, stepless >> Total Power Requirement: 4.45 kW >> Weight: approx. 1,200 kg Accessories: >> New 3-axis DRO by K&C, 12-month manufacturer warranty, operating manual included Functions: mm/inch switch, coordinate selection ABS/INC, value halving, reference point, tool memory (200 tools), taper calculation, radius/diameter switch, quick zeroing, counting direction reversal >> Tool cabinet including: - Several 3-jaw chucks with multiple sets of jaws - Multifix A with holders - Internal and external collets with quick-change system - Change gears - 4-jaw chuck - Face plate - Fixed and travelling steadies - Coolant system - Centre points - Operator’s manual - Turning tools and much more About the machine: Offered here is a Schaublin 135 high-precision lathe. The machine is in excellent condition, comes from a university, and has had minimal use. Equipped with a new K&C 3-axis DRO and a large range of accessories. Take advantage of the opportunity to inspect the machine under power on site and see the condition for yourself.

Stanje: novo, The Turnado 230/2000 is a state-of-the-art conventional lathe that forms part of the universal lathe product line. With this machine, KNUTH has developed a precise and powerful tool that impresses with its robust construction and long service life. Equipped with a high-performance motor and a wide range of useful accessories, this machine meets various production demands. Its stable design and heavy, one-piece cast bed ensure high stability during machining, while the user-friendly control panel on the headstock and the 3-axis position display provide easy operation and great accuracy. Additionally, the adjustable longitudinal stops allow for automated feed disengagement, significantly simplifying repeat operations. The Turnado 230/2000 is perfectly suited for long workpieces, thanks to standard accessories that include both a traveling and a fixed steady rest. If you are ready to acquire this robust universal lathe, order now or request a quote. Gtoljp Ebgrshccqmot

Stanje: rabljeno, Premer struženja nad posteljo: 460 mm Premer struženja nad prečnim suportom: 256 mm Dolžina struženja: 1250 mm Razdalja med konicama: 1250 mm Višina konice: 230 mm Premer vretena: 55 mm Hitrosti vretena: 35 - 1800 min⁻¹ Gslhccqjxwp Ebomott Teža stroja: ca. 2,7 t Dimenzije stroja D x Š x V: 2,75 x 1,20 x 1,42 m Oprema: Tročeljustna glava Ø250 mm, MULTIFIX glava s 3 vložki, fiksna luneta

Stanje: rabljeno, Leto izdelave: 2020, Condition: used Year of manufacture: 2020 Stock number: 1658 Delivery time: immediate, subject to prior sale Country of origin: Bulgaria Price: €26,500 In stock: 1 unit Special price: €22,600 Swing over bed: 400 mm Centre distance: 1,000 mm Centre height: 200 mm Spindle bore: 52 mm Swing over cross slide: 235 mm Bed width: 320 mm Spindle mount / DIN55027: Size 6 Spindle taper: 6 Morse Number of spindle speeds: 12 Gtolewirdtjhccqmjt Spindle speed range: 50-2,240 rpm Number of feeds: 80 Longitudinal feed: 0.015 – 0.6 mm/rev Cross feed: 0.0075 – 0.3 mm/rev Number of threads: 40 Metric thread range: 0.25 – 7.5 mm Inch thread range: 120 – 4 TPI Module thread range: 0.0625 – 1.875 Cross slide travel: 235 mm Top slide travel: 110 mm Tailstock quill diameter: 50 mm Tailstock taper: 4 Morse Tailstock quill travel: 100 mm Motor power: 4 kW Length: 2,750 mm Width: 1,100 mm Height: 1,600 mm Weight: 1,540 kg This machine is currently in use in our workshop for repair work and has therefore seen very little use so far (original price €36,070.00). Drive via geared transmission 3-axis digital readout Fagor 40i Multifix quick-change tool post type B with 4 holders (3 rectangular, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 200 mm Spindle nose No. 6 DIN 55027 Rapid traverses (4) Fixed centre Coolant system 1 piece flange plate for lathe chuck Ø 200 mm 1 adapter sleeve Rear chip splash guard over full length Leadscrew and feed shaft cover Chuck guard Tool holder guard Levelling bolts and pads Tailstock with quick clamp Low-voltage machine lamp Operating instructions and machine labels in GERMAN CE conform equipment

Stanje: rabljeno, Leto izdelave: 2015, Technical details: Swing diameter over bed: 420 mm Swing diameter over support: 255 mm Turning length: 1000 mm Swing diameter in gap: 580 mm Centre height: 205 mm Spindle bore: 52 mm Speed range: 30 - 550 / 550 - 3000 rpm (frequency controlled) / 2-step gearbox Feed rate (longitudinal): 0.05 - 1.7 mm/rev Feed rate (cross): 0.025 - 0.85 mm/rev Tailstock quill taper: MT 4 Tailstock quill travel: 120 mm Total power requirement: 5.5 kW Machine weight approx.: 1.5 t Dimensions (LxWxH) approx.: 2.1 x 1.1 x 1.5 m Thread cutting possible, e.g. metric and inch threads Stepless speed control 3-axis position display Sino SPSG-3V Gtslhccevaxi Eeqmst 3-jaw chuck NOLEX Ø 200 mm Multifix quick-change tool post size B Chuck guard (monitored) Chip guard Machine lighting Coolant system Accessories: 2x Multifix quick-change tool holders (1x fitted)