Vodni-/vlečni vretenasti stružnica, premer struženja nad posteljo 400–499 mm nakup rabljenega (222)
Razvrsti rezultate
- Najnižja cena Najvišja cena
- Najnovejši oglasi Najstarejši oglasi
- Najkrajša razdalja Največja razdalja
- Najnovejše leto izdelave Najstarejše leto izdelave
- Zadnja posodobitev Najstarejša posodobitev
- Proizvajalci od A do Ž Proizvajalec od Z do A
- Pomembnost
- Najnižja cena
- Cena
- Najvišja cena
- Cena
- Najnovejši oglasi
- Datum objave
- Najstarejši oglasi
- Datum objave
- Najkrajša razdalja
- Razdalja
- Največja razdalja
- Razdalja
- Najnovejše leto izdelave
- Leto izdelave
- Najstarejše leto izdelave
- Leto izdelave
- Zadnja posodobitev
- Nazadnje posodobljeno
- Najstarejša posodobitev
- Nazadnje posodobljeno
- Proizvajalci od A do Ž
- Proizvajalec
- Proizvajalec od Z do A
- Proizvajalec
- Oznaka od A do Ž
- Oznaka
- Oznaka od Z do A
- Oznaka
- Model od A do Ž
- Model
- Model od Z do A
- Model
- Najnižja referenca
- referenca
- Najvišja referenca
- referenca
- Najkrajši obratovalni čas
- Obratovalni čas
- Najdaljši čas obratovanja
- Obratovalni čas
- Pomembnost
- Pomembnost
Stroji za obdelavo kovin in orodjarne strojne opreme Stružnice Vodni-/vlečni vretenasti stružnica, premer struženja nad posteljo 400–499 mm
Mali oglas
Hilden
815 km
Visokozmogljive stružnice
MEXPOLSchwerdrehmaschine TUS 1000 stufenlosen
Klic
Stanje: novo, Leto izdelave: 2026, premer struženja nad prečnim suportom: 690 mm, izvrtina vretena: 155 mm, premer struženja: 1.090 mm, premer struženja nad ležiščem sani: 1.000 mm, višina središča: 500 mm, širina na sredini: 700 mm, stružna dolžina: 6.000 mm, širina postelje: 700 mm, največja hitrost vrtenja: 1.000 obr/min, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Heavy-duty lathe with stepless speed control in 4 ranges.
Digital position display / Digital measuring system with control of constant cutting speed
Rjdpfxjugwrgo Abhsn
• High main drive motor power 30 kW as standard (applicable in the range of 5 - 1000 rpm)
• Rigid main spindle with 132 mm bore
• Bed width 700 mm
• Prism guideway, rigid cross slide
Accuracy according to DIN 8607
• Rigid main spindle:
TUS 800 /100/1250 with 155 mm spindle bore, mounted in precision bearings
Manufactured by: FAG or SKF
Spindle mount according to DIN 55027/15
• Hardened guideways 48 +/-2 HRC
• Interlocked chuck guard (max. TUS 800 = 760 mm, TUS 1000 = 960 mm, TUS 1250 = 960 mm)
Rear full-length chip and splash guard wall
• Moving front chip guard
• Tip control for main spindle
• Closed, rigid feed box with sliding gear blocks on multi-spline shafts
• Central lubrication for bed slide and compound slide
• Central lubrication for headstock and feed box
• Feeds, metric and imperial threads without gear change
• Rapid traverse longitudinal, transverse, and on the top slide
• Safety shut-off for the handwheel on the bed slide or the hand crank on the compound slide during rapid traverse
• Feed direction reversal on the bed slide and additionally on the headstock
• Quick-change tool holder model D1
Scale ring on the bed slide and tailstock handwheel
• Grading on the tailstock quill
2-stage tailstock quill/ with 1:1 and 1:4 gearing
• Electrically adjustable tailstock
Support for leadscrew and feed shaft from 2000 mm SW
• CE and declaration of conformity
Mali oglas
Wishaw
1.698 km
Center stružnica
TOS TrenčínSN 40 B
Klic
Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 220 mm, izvrtina vretena: 50 mm, premer struženja: 400 mm, premer struženja nad ležiščem sani: 400 mm, premer struženja nad zgornjim sanežem: 220 mm, višina središča: 200 mm, stružna dolžina: 1.000 mm, Stružnica z odmikom v ležišču TOS SN 40B
Model: SN 40B
Premer nad ležiščem: 400 mm
Premer nad vozičkom: 220 mm
Premer v izrezu: 600 mm
Rodpfxoxxyy Se Abhsn
Razdalja med konicama: 1000 mm
Hitrosti vretena: 22 – 2000 min⁻¹
Premer vretena: 50,8 mm
Motor: 5,5 kW
Stroj je opremljen z:
3-čeljustna glava
4-čeljustna glava
Hitroizmenljiv nosilec orodja
Fiksna luneta
Mali oglas
Root
516 km
Center stružnica
COLCHESTERCombi 2000
Klic
Stanje: dober (rabljeno), Leto izdelave: 1999, Deli, ki so prikazane na fotografijah z roko, niso vključene.
Redpfxew Uiguj Abhsn
Tehnični podatki so prikazani na sliki.
Mali oglas
Thurmaston
1.368 km
Center stružnica
XYZSLX 425
Klic
Stanje: dober (rabljeno), Leto izdelave: 2013, Razdalja med konicama 1250 mm, premer obdelave nad ležiščem 470 mm, premer obdelave nad prečnim suportom 257 mm, hitrost vretena 2500 o/min, premer vretena 80 mm, krmiljenje Prototrak SLX, hitromenjalni nosilec orodja, ročni trivrati vpenjalni tulec, hlajenje, varnostni zaščitni pokrovi z blokado.
Redpfx Asx Dk Svsbhjn
Dražba
Dražba končana
Baden-Württemberg
517 km
Center stružnica
TA SHINGCROWN-2
Stanje: nepreverjeno (rabljeno), Leto izdelave: 1980, Funkcionalnost: nepreverjeno, številka stroja/vozila: C20018, izvrtina vretena: 53 mm, premer struženja: 460 mm, premer struženja nad ležiščem sani: 240 mm, stružna dolžina: 1.000 mm, največja hitrost vretena: 2.000 obr/min, Brez minimalne cene – zagotovljena prodaja najvišjemu ponudniku!
Redpfx Aow Ngqyjbhon
TEHNIČNI PODATKI
Vrtina vretena: 53 mm
Obratovalni premer: 460 mm
Premer nad sanmi: 240 mm
Dolžina struženja: 1.000 mm
Hitrost vrtenja: 32 – 2.000 o/min
PODROBNOSTI STROJA
Skupna dolžina: 2.200 mm
Skupna širina: 1.000 mm
Skupna višina: 1.300 mm
OPREMA
- Konjiček
- Štirivalentna vpenjalna glava, premer: 200 mm
Odkrijte več rabljenih strojev
Mali oglas
Böblingen
533 km
Center stružnica
OptimumOPTIturn TZ 4 (3432242)
Klic
Stanje: novo, Optimum OPTIturn TZ 4 Precision Lead Screw and Feedscrew Lathe
Precision lead screw and feedscrew lathes with digital position indicator DPA 32 and quick-change tool post.
DESCRIPTION:
- Hardened and ground Z-axis guideways
- Motor protection switch
- Control cabinet with 24 V DC power supply
- Partial enclosure with integrated, large-dimension chip guard
- Chip guard featuring built-in position indicator, coolant hose, and additional control panel
- Dual-channel safety electronics
- Cross and compound slide spindles are hardened and ground, adjustable via split nut
- Leadscrew and feedscrew cover
- Fine-stepped feed and thread cutting range
- Energy chain for gentle cable and hose routing
- Machine comes pre-installed with standard gears for metric thread pitches and module threads. Change gears for imperial and D.P. threads optionally available
- Switches with lifecycle calculation tested according to EN ISO 13849
- Decoupled handwheels tested according to EN 23125
- Safety handwheels with disengagement function on X and Z axes
- Pull-out chip tray to the front
- Coolant system included
- Quick-change tool post SWH 5-B
- Tool holder 25 x 120 Type D for square tools up to 20 mm
- LED machine lamp for complete illumination of the working area
Technical Specifications:
Dimensions and Weight
- Length (product) approx. 1960 mm
- Width/Depth (product) approx. 1060 mm
- Height (product) approx. 1690 mm
- Weight (net) approx. 1250 kg
Working Areas
- Center height: 200 mm
- Distance between centers: 800 mm
- Swing over bed: 400 mm
- Swing over cross slide: 245 mm
- Bed width: 260 mm
Speed Range
- Number of speed steps: 16
- Speed range: 45 – 1800 rpm
Electrical Data
- Drive motor power: 3 / 4.5 kW
- Connected voltage: 400 V
- Mains frequency: 50 Hz
- Total connected load: 6 kW
Coolant System
- Coolant system power
- Coolant pump: 0.125 kW
Spindle
- Spindle mount DIN ISO 702-1 No. 5 Form A2
- Spindle bore/bar capacity diameter: 52 mm
- Chuck passage diameter: 52 mm
- Spindle taper: MT 6
Tailstock
- Tailstock taper: MT 3
- Tailstock quill travel: 110 mm
- Tailstock quill diameter: 50 mm
Thread Cutting
Redpfx Ajhbdz Sebhon
- Metric pitch: 0.2 – 14 mm/rev
- Number of metric pitches: 26
- Imperial pitch: 80 – 1 TPI
- Number of imperial pitches: 42
- Diametral pitch: 3 – 200 DP
- Number of diametral pitches: 33
- Module thread pitch: 0.1 – 7 mm/rev
- Number of module thread pitches: 44
Travel
- Cross slide travel: 112 mm
- Compound slide travel: 212 mm
- Saddle travel: 800 mm
Feeds
- Longitudinal feed range: 0.0263 – 1.8416 mm/rev
- Number of longitudinal feeds: 48
- Facing feed range: 0.0133 – 0.9321 mm/rev
- Number of facing feeds: 48
Scope of Delivery
- Fixed steady rest, Ø 10 - 130 mm
- Travelling steady rest, Ø 10 - 100 mm
- Reducing sleeves MT3 and MT6
- Fixed center MT3
- Quick-change tool post 5-B
- Tool holder 25 x 120 Type D for square tools
- Set of change gears for metric threads
- Initial machine fill with quality oil
- Operating tools
- Integrated coolant system
Mali oglas
Böblingen
533 km
Univerzalna stružnica
ELMAGPREMIUM CU 325 RD - Vario
Klic
Stanje: novo, ELMAG Universal Lathe PREMIUM CU 325 RD - Vario
Centres distance 1000 mm
incl. RÖHM chuck
Performance Data and Mounts:
- Swing diameter: 325–1,320 mm, without gap 440–1,500 mm
- Turning capacity over carriage: Ø 190–940 x 6,000 mm
- Drive motor: 2,200–22,000 W, 400 V, high torque
- Chuck mount: DIN 55027
- Tailstock taper: MK 3 – MK 6
Standard Equipment:
- RÖHM 3-jaw chuck Ø 160 mm
- 5-piece quick-change tool post set
- Halogen machine lamp
- Emergency stop button / no-voltage release
- Chuck guard with safety switch
- Carriage with splash guard
- Machine base / chip tray / splash guard
- Tool kit / operating manual / CE
PREMIUM CU Series Standards:
- Heavy cast iron machine bed with excellent vibration damping
- Removable gap bridge
- Prism guides
- Hardened and precision-ground spindle, high concentricity, adjustable precision bearings
- Low-vibration spindle and feed gearboxes with oil bath
- Hardened and precision-ground chrome-nickel steel gears
- Reversible feed mechanism
- Covered, trapezoidal-thread leadscrew, hardened and precision-ground
Redpjt Hg Sksfx Abhon
- Carriage with locknut
- Precision adjustable carriage guides
- Heavy-duty tailstock with taper offset adjustment
- Lathe accuracy according to DIN
Optional Accessories:
- SINO 3-axis digital position display
- 7-piece indexable turning tool set 16 x 16 mm
- 7-piece indexable insert set, 16 x 16 mm
- 6-piece parting tool set with inserts
- 8 machine feet Ø 160 mm
On request:
- Travelling steady rest
- Fixed steady rest
- Fixed steady rest with roller bearing guide
- Faceplate
- 4-jaw independent chuck
ADVANTAGES
Spindle and feed gearbox with quick-select elements
Feed reverse
Sliding safety cover
Gear selector
Halogen lamp
Coolant pump
Emergency stop button
Rapid traverse motor for longitudinal carriage
TECHNICAL DATA
Centre distance 1000 mm
Centre height 165 mm
Swing over bed 325 mm
Swing over carriage 190 mm
Swing without gap 440 mm
Bed width 200 mm
Cross slide travel 150 mm
Top slide travel 95 mm
Maximum turning tool cross-section 16x16 mm
Chuck mount (DIN 55027) No. 5
Spindle nose (spindle taper) MK 4 mm
Spindle bore 32 mm
Speed range 1, stepless 85–405 rpm
Speed range 2, stepless 470–2200 rpm
Longitudinal feeds (48) 0.006–1.77 mm/rev
Cross feeds (48) 0.003–0.885 mm/rev
Metric thread pitches (48) 0.1–28 mm
Metric module threads (19) 0.1–1.75 mm
Inch threads, TPI (53) 75–2.5 TPI
Inch module threads, TPI (19) 70–4 TPI
Tailstock taper MK 3
Tailstock diameter 40 mm
Tailstock travel 100 mm
Motor power 2200 W
Mains connection 400/50 V/Hz
Overall length 2150 mm
Overall height 1300 mm
Weight 770 kg
Mali oglas
Böblingen
533 km
Univerzalna stružnica
ELMAGPREMIUM CU 630 RD - Vario
Klic
Stanje: novo, ELMAG Universal Lathe PREMIUM CU 630 RD - Vario
Centre Distance 1000 mm
Including RÖHM Chuck
Performance Data and Mountings:
- Swing Diameter 325-1,320 mm, without gap 440-1,500 mm
- Turning capacity over cross slide Ø 190-940 x 6,000 mm
- Main drive motor: 2,200-22,000 W, 400 V, high torque
- Chuck mount: DIN 55027
- Tailstock quill taper: MT 3 - MT 6
Standard Equipment:
- RÖHM 3-jaw chuck
- 5-piece quick-change toolholder set
- Halogen machine lamp
- Emergency stop button / no-voltage release
- Chuck guard with safety switch
- Tool slide with splash guard
- Machine base / chip tray / splash guard
- Tool kit / operating instructions / CE
PREMIUM CU Series Standards:
- Heavy-duty cast iron machine bed with excellent vibration damping
- Removable gap bridge
- Prism guideways
- Hardened and precision-ground spindle, high concentricity, adjustable precision bearings
- Smooth running headstock and feed gearbox, oil-bath lubricated
- Gears made of chrome-nickel steel, hardened and precision-ground
- Feed reverse switch
- Covered Acme thread leadscrew, hardened and precision-ground
- Tool slide with locking nut
- Precision, adjustable carriage guides
- Massive tailstock with Morse taper offset
- Lathe accuracy according to DIN standards
Optional Accessories:
- SINO 3-axis digital readout
- Indexable turning tool set 25 x 25 mm, 7-piece
- Indexable insert set, 7-piece, 25 x 25 mm
- Grooving tool set incl. inserts, 6-piece
- Machine mounts Ø 160 mm, set of 6
On Request:
- Travelling steady
- Fixed steady
- Fixed steady with ball bearing guide
- Faceplate
- 4-jaw independent chuck
ADVANTAGES
Headstock and feed gearbox with quick-shift elements
Feed reversal
Sliding safety cover
Gear selector
Halogen lamp
Coolant pump
Emergency stop button
Rapid traverse motor for longitudinal slide
TECHNICAL DATA
Centre distance 2,000 mm
Centre height 315 mm
Swing over bed 630 mm
Swing over cross slide 430 mm
Swing without gap 830 mm
Bed width 400 mm
Cross slide travel 315 mm
Top slide travel 130 mm
Max. tool section 32x32 mm
Chuck mount (DIN 55027) No. 11
Spindle nose (main spindle) 120 mm
Spindle bore 103 mm
Speed range 1, stepless 16 - 63 rpm
Speed range 2, stepless 63 - 250 rpm
Speed range 3, stepless 315 - 1250 rpm
Longitudinal feeds (120) 0.04 - 12 mm/rev
Cross feeds (120) 0.02 - 6 mm/rev
Metric thread pitches (64) 0.5 - 120 mm
Metric module threads (64) 0.125 - 30 mm
Inch threads, TPI (64) 60 - 1/4 TPI
Rjdpfxot Hhbyj Abhen
Inch module threads, TPI (64) 240 - 1 TPI
Tailstock quill taper MT 5
Tailstock quill diameter 90 mm
Tailstock quill travel 230 mm
Motor power 11,000 W
Power supply 400/50 V/Hz
Length (total) 3,600 mm
Height (total) 1,400 mm
Weight 3,310 kg
Mali oglas
Böblingen
533 km
Univerzalna stružnica
ELMAGPREMIUM CU 400 RD - Vario
Klic
Stanje: novo, ELMAG Universal Lathe PREMIUM CU 400 RD - Vario
Center Distance 1000 mm
incl. RÖHM Chuck
Performance Data and Mounts:
- Turning Ø 325–1,320 mm, without gap 440–1,500 mm
- Swing over cross slide Ø 190–940 × 6,000 mm
- Drive Motor: 2,200–22,000 W, 400 V, high torque
- Chuck Mount: DIN 55027
- Tailstock Taper: MT 3 – MT 6
Standard Equipment:
- RÖHM 3-jaw chuck
- 5-piece quick-change tool post set
- Halogen machine lamp
- Emergency stop button / no-voltage release
- Chuck guard with safety switch
- Carriage with splash guard
- Base frame / chip tray / splash guard
- Tool set / operating manual / CE conformity
PREMIUM CU Series Standards:
- Heavy-duty cast iron machine bed, excellent vibration damping
- Removable gap bridge
- Prism guideways
- Spindle hardened and precision ground, high concentric accuracy, adjustable precision bearings
- Smooth running spindle and feed gearbox in oil bath
- Gears made from hardened and ground chromium-nickel steel
- Feed reverse switch
- Covered, trapezoidal-threaded lead screw, hardened and ground
- Carriage with locking nut
- Precision-adjustable slideways
- Solid tailstock with offset turning capability
- Lathe accuracy in accordance with DIN standards
Special Accessories:
- SINO digital position display for 3 axes
- 7-piece indexable turning tool set 25 × 25 mm
- 7-piece indexable insert set 25 × 25 mm
- 6-piece parting tool set incl. inserts
- Machine feet Ø 160 mm, pack of 8
Upon request:
- Travelling steady
- Fixed steady
- Fixed steady with ball bearing guide
- Faceplate
- 4-jaw independent chuck
ADVANTAGES
- Quick-shift elements on spindle and feed gearbox
- Feed reversal
- Removable safety guard
- Gear selector
- Halogen lamp
- Coolant pump
- Emergency stop
- Rapid traverse motor for longitudinal slide
TECHNICAL DATA
Center distance 1000 mm
Center height 200 mm
Swing over bed 400 mm
Swing over cross slide 235 mm
Swing without gap 550 mm
Bed width 320 mm
Cross-slide travel 235 mm
Top-slide travel 110 mm
Max. tool cross-section 25×25 mm
Chuck mount DIN 55027 No. 6
Spindle mount (main spindle) MT 6 mm
Rsdpfxet Hhbto Abhjn
Spindle bore 52 mm
Speed range 1, stepless 18–98 rpm
Speed range 2, stepless 48–265 rpm
Speed range 3, stepless 3: 144–790 / 4: 385–2120 rpm
Longitudinal feeds (80) 0.015–0.6 mm/rev
Cross feeds (80) 0.0075–0.3 mm/rev
Metric thread pitches (40) 0.25–7.5 mm
Metric module threads (40) 0.0625–1.875 mm
Inch threads, TPI (40) 120–4 TPI
Inch module threads, TPI (40) 480–16 TPI
Tailstock taper MT 4
Tailstock barrel diameter 50 mm
Tailstock travel 100 mm
Motor power 7,500 W
Power supply 400/50 V/Hz
Total length 2,350 mm
Total height 1,330 mm
Weight 1,590 kg
Mali oglas
Böblingen
533 km
Center stružnica
ELMAGINDIVIDUAL 1000/200 - Vario
Klic
Stanje: novo, ELMAG Universal Lathe INDIVIDUAL 1000/200 - Vario
Including RÖHM chuck
Including 3-axis digital position display
Including quick-change toolholder 'Set', Multifix system
Ready for operation: includes oil filling, de-preserved (degreased), completely assembled, and test run performed
Individual 1000/200
The Individual is a compact lead screw and feed shaft lathe for discerning users, ideally suited for training and maintenance applications. With infinitely variable speed control and a digital speed display, the machine always allows precise adjustment of cutting speed to the material.
With precision bearings and a weight of 850 kg, this especially smooth-running machine is designed for demanding continuous operation. It enables machining of parts up to Ø 200 x 1,000 mm over the cross slide. The INDIVIDUAL 1000/200 features a powerful 2,400 watt motor, stepless speed control from 45 to 2,500 rpm, and 48 longitudinal and cross feeds.
ADVANTAGES
Coolant tank and pump integrated into machine base
Infinitely variable speed adjustment including digital display
LED lighting
Automatic central lubrication
Digital 3-axis position display with color screen
Electromagnetic motor brake
Large protective cover for a clean working environment
TECHNICAL DATA
Centre distance 1000 mm
Centre height 200 mm
Swing over bed 400 mm
Swing over cross slide 260 mm
Swing without gap 560 mm
Gap length 235 mm
Cross slide travel 175 mm
Top slide travel 95 mm
Max. tool section 25x25 mm
Chuck mount D1 - 5
Spindle taper (main spindle) MK 5 mm
Spindle bore 51 mm
Speed range 45 - 2500 rpm
Rjdst Ef Hqjpfx Abhon
Speed steps stepless
Longitudinal feeds 0.043 - 0.653 mm/rev
Cross feeds 0.027 - 0.413 mm/rev
Metric threads 0.4 - 7 mm
Inch threads, TPI 4 - 56 TPI
Inch module threads, TPI 4 - 56 TPI
Leadscrew pitch 4 mm
Leadscrew diameter 22 mm
Tailstock taper MK 3
Tailstock diameter 50 mm
Tailstock travel 120 mm
Motor power 2400 W
Coolant pump 40 W
Electrical connection 400/50 V/Hz
Overall length 2114 mm
Overall width 998 mm
Overall height 1700 mm
Weight 850 kg
Mali oglas
Erith
1.235 km
CNC stružnica
Used HAASST10 CNC Lathe
Klic
Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 3108833, SPECIFIKACIJA STROJA
Premer nad prednjim vozičkom: 641 mm
Premer nad prečnim sani: 413 mm
Največji premer struženja: 356 mm
Največja dolžina struženja: 356 mm
Vpenjalni nos vretena: A2-5
Premer vretenaste izvrtine: 58,7 mm
Kapaciteta palic: 44 mm
Maksimalno število vrtljajev vretena: 6.000 vrt/min
Moč motorja vretena: 11,2 kW
Število orodnih postaj revolverja: 12
Rsdpfx Abox Ig Aujhon
Hitri pomik os Z/X: 30,5 m/min
Približna teža: 2.500 kg
STROJ JE OPREMLJEN Z
CNC krmilnim sistemom Haas
Trivpenjalni vpenjalni tulec premera 165 mm
Vpenjalna glava za vpenjalne tule
Palčni podajalnik Hydrafeed MSV 65
Lovilec obdelovancev
Hidravlični konjiček
Transportni trak za odrezke
Različni nosilci orodij
Varnostna ograja z blokado
Avtomatski mazalni sistem
Hladilni sistem
Mali oglas
Dinkelsbühl
476 km
Center stružnica
OptimumTH 4610D
Klic
Stanje: novo, Leto izdelave: 2025, premer struženja nad prečnim suportom: 270 mm, izvrtina vretena: 58 mm, premer struženja: 460 mm, višina središča: 230 mm, širina na sredini: 1.060 mm, poteza s peresom: 130 mm, premer tulec: 60 mm, skupna dolžina: 2.280 mm, skupna širina: 1.150 mm, skupna višina: 1.650 mm, Premer struženja v izrezu: 690 mm, največja hitrost vrtenja: 2.000 obr/min, vrtljajska hitrost (min.): 25 obr/min, skupna masa: 1.910 kg, nosilec puše: MK 4, maksimalni metrični navoj (korak): 14 mm, premer puše konjička: 60 mm, Optimum lead and feed screw lathe TH 4610D with DPA 31 Plus digital position display and quick-change tool post
Hardened and ground Z-axis guideways
Guaranteed spindle nose runout accuracy ≤ 0.015 mm
Shafts, gears, and main spindle running in oil bath
Leadscrew cover
Precisely machined carriage
All guides adjustable via gib strips
Mechanical longitudinal feed cut-off for the carriage with four adjustable eccentrics
Forward/reverse operation on the carriage switchable via control shaft
Central lubrication in the carriage
Compound slide adjustment range ±90°
Gear wheels smooth-running, hardened and ground, mounted in two adjustable precision tapered roller bearings
Switch with lifecycle calculation, tested according to EN ISO 13849
Large chip guard with integrated LED machine lamp
Handwheels with adjustable fine graduation 0.04 / 0.02 mm
Safety handwheels with disengagement function according to EN23125 on X and Z axes
Rapid-change feed gearbox of closed design, gears and shafts hardened and ground, running in oil bath in precision bearings
Thread dial scale adjustable
Tailstock adjustable for taper turning ±10 mm
Tailstock quill and handwheel with adjustable fine graduation 0.025 mm
Fast, simple, and tool-free tailstock adjustment via clamping lever
Cable routing via drag chain
Heavily ribbed, prism bed, induction-hardened and precision ground, made from grey cast iron
Coolant system with separate coolant tank featuring level indicator and oil separator; easy and complete draining and cleaning as per DIN
Emergency stop function with foot operation
Scope of delivery:
Fixed steady rest, bore Ø 25 - Ø 178 mm
Travelling steady rest, bore Ø 19 - Ø 114 mm
LED machine lamp
Adapter MK6-MK4
Dead centre MK4
Dead, but temperature resistant, centre MK4
Quick-change tool post SWH 5-B
Tool holder 25 x 120 Type D for 20 mm square turning tools
Rodpfx Abswaaf Hohen
Thread dial indicator
Change gear set
Gears for metric thread dial indicator
First machine fill with quality oil
Operating tools
Options on request, we are happy to advise:
- 3-jaw or 4-jaw chuck
- Tool holder / Turning tools
- Mounting elements
- Commissioning
Do you need a different machine? Please contact us!
Mali oglas
Bühl
587 km
Sredinski stružnica in stružnica za vreteno
MEUSERM 0 L
Klic
Stanje: rabljeno, Swing diameter over bed: 410 mm
Swing diameter over cross slide: 240 mm
Turning length: 1000 mm
Centre height: 205 mm
Centre distance: 1000 mm
Spindle bore: 47 mm
Rjdpevcrmcefx Abhen
Spindle speeds: 28 - 1250 rpm
Feeds - longitudinal: 0.03 - 8.8 mm/rev
Feeds - cross: 0.006 - 1.84 mm/rev
Threads - metric pitch: 0.25 - 76 mm
Threads - imperial: 1/2 - 152 TPI
Threads - module: 0.25 - 22 mm
Bed width: 320 mm
Tailstock quill diameter: 55 mm
Tailstock taper: MT 4
Cross slide travel: 290 mm
Top slide travel: 120 mm
Total power requirement: 5.5 kW
Machine weight approx.: 1.3 t
Machine dimensions (L x W x H): 2.32 x 1.15 x 1.22 m
Accessories: RÖHM 3-jaw chuck 160 mmø, MULTIFIX toolpost with 2 tool holders, stationary steady rest, centre, coolant system
Mali oglas
Denekamp
903 km
Sredinska stružnica
Weisser HeilbronnJunior
Klic
Stanje: dober (rabljeno), Leto izdelave: 1982, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 3251, premer struženja nad prečnim suportom: 230 mm, izvrtina vretena: 45 mm, premer struženja: 440 mm, višina središča: 220 mm, stružna dolžina: 1.200 mm, skupna dolžina: 2.600 mm, skupna širina: 1.100 mm, skupna višina: 1.700 mm, največja hitrost vretena: 2.000 obr/min, hitrost vretena (min.): 26 obr/min, največji premer metrickega navoja: 112 mm, koraki metričnega navoja: 40, skupna masa: 2.000 kg, premer trikrake glave: 200 mm, Ta stružnica je opremljena z digitalnim odčitavanjem na dveh oseh, centralnim mazalnim sistemom za suport, popolno hladilno napravo, zaščito čeljustne plošče in izpolnjuje minimalne varnostne zahteve.
Rodoxxx Arepfx Abhjn
Mali oglas
Bühl
587 km
Sredinski stružnica in stružnica za vreteno
WEIPERTWG 425
Klic
Stanje: rabljeno, Swing diameter over bed: 480 mm
Swing diameter over cross-slide: 300 mm
Turning length: 1500 mm
Center height: 240 mm
Center distance: 1500 mm
Spindle bore: 42 mm
Spindle speeds: 14 – 1400 rpm
Total power requirement: kW
Machine weight approx. 2.4 t
Machine dimensions (L x W x H): 3.00 x 1.05 x 1.40 m
Accessories: 3-jaw chuck 250 mmø, MULTIFIX toolpost, live center
Rsdpjtqqx Asfx Abhsn
Mali oglas
Bühl
587 km
Sredinski stružnica in stružnica za vreteno
Böhringer44 DK
Klic
Stanje: rabljeno, Leto izdelave: 1973, Swing diameter over bed 490 mm
Swing diameter over cross slide 280 mm
Turning length 2000 mm
Centre height 245 mm
Rodjtqqvvjpfx Abhen
Centre distance 2000 mm
Spindle bore 62 mm
Total power requirement 7.5 kW
Machine weight approx. 3.5 t
Machine dimensions (L x W x H) 3.78 x 1.17 x 1.42 m
Accessories: 3-jaw chuck 240 mmø, faceplate 400 mmø, MULTIFIX tool post,
fixed steady rest, coolant system
Mali oglas
Ensisheim
612 km
Vzporedna stružnica
WEILERPRIMUS
Klic
Stanje: zelo dobro (rabljeno), Parallel-Drehmaschine WEILER Typ PRIMUS
Spitzenweite: 400 mm
Max. Umlaufdurchmesser über Bett: 250 mm
Max. Umlaufdurchmesser über Support: 130 mm
Spindeldurchlass: 24 mm
Multifix-Schnellwechselrevolver Typ A
3-Backenfutter Ø 155 mm
Gewindeschneiden: Metrisch + Whitworth
Reitstockkegel: MK2
Digitalanzeige: HEIDENHAIN ND522
Automatische Vorschübe: 2 Achsen
Neuer Schaltschrank
Lieferumfang: 1 4-Backenfutter Ø 155 mm, 4 Werkzeughalter, 1 Bohrfutter
Spannung: 380 V
Abmessungen (L x B x H): 1300 x 900 x 1900 mm
Gewicht: ca. 500 kg
Rsdpfexnp I Dex Abhon
Maschine in SEHR GUTEM ZUSTAND
Mali oglas
Wiesbaden
667 km
Center stružnica
MEUSERM 0 L
Klic
Stanje: dober (rabljeno), Centre height: 205 mm
Centre distance: 1500 mm
Swing diameter over bed: 410 mm
Spindle bore: 47 mm
Spindle mount: Size 6
Tailstock taper: MT 4
Spindle speeds: 28 - 1250 rpm
Feeds (longitudinal/cross): 0.03-1.3 / 0.008-0.33 mm/rev
Thread pitches: 0.25 - 76 mm
Electrical connection: 380 V, 3 kW
Rsdpfx Ajv Du Ixsbhon
Space requirement: 2800 x 1100 x 1600 mm
Weight: 1330 kg
Mali oglas
Sonneberg
547 km
Stružnica Poljska TUE40
Klic
Stanje: dober (rabljeno), Leto izdelave: 1970, Make: Metalexport Poland
Year of manufacture: 1970
Type / Model: TUE 40
Machine number: 8604
Control: conventional
Rjdpjv N Tu Iofx Abhsn
Distance between centers: 1,500 mm
Spindle bore: 38 mm
Center height: 210 mm
Swing diameter over bed: 420 mm
over cross slide: 240 mm
in the gap: 600 mm
Speed range: 22.4 to 1,000 rpm
Feed:
Connection: kW
Accessories/Equipment: Fixed and travelling steady rest, 4-way tool post; 200 mm 3-jaw chuck; coolant system
Condition: good
Weight: approx. 2.5 t
Dimensions: 2,800 x 800 x 1,200 mm
Mali oglas
Weiterstadt
632 km
Center stružnica
TakisavaTAL 510
Klic
Stanje: pripravljen za uporabo (rabljen), Lathe, make Takisava, type TAL 510, equipped with chuck, quick-change tool post, and live center.
Rsdpfx Absvyuuqehjn
Mali oglas
Haiger
715 km
Vertikalna tračna žaga
WeipertKB 45
Klic
Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2008, SPECIFICATION KB-45
Redpfxeu Rdr Rj Abhon
Cutting capacity: 455 mm
Maximum working height: 255 mm
Table: 600 x 500 mm
Tilt: 4-way up to 15°
Saw blade length: 3490 mm
Saw blade width: 3–16 mm
Saw blade speed: 25–115 m/min
Butt welder capacity: 3–16 mm
Motor size: 1 HP
Weight: 285 kg
Height: 2020 mm
Width: 1100 mm
Depth: 660 mm
STANDARD FEATURES
Overload switch
Single-phase/three-phase power supply
Integrated saw blade and wheel cleaning brush
Saw blade welding device, blade shear and grinding machine
Grooved table
Low-voltage halogen lamp
Mitre guard for angled cuts
Quick-release rip fence for straight cuts
Znak zaupanja
Prodajalci, certificirani pri Machineseeker

Mali oglas
Haiger
715 km
Tračna žaga
WeipertG 5025
Klic
Stanje: novo, Leto izdelave: 2025, Weipert G 5025 Bandsaw
Blade size:
2715 x 27 x 0.9 mm
Blade tensioning:
mechanical (manual)
Cutting speed:
36, 72 m/min
Arm descent adjustment:
stepless – via hydraulic cylinder
Vice height:
765 mm
Minimum material length in vice:
100 mm
Power supply:
3-phase 400V
Rjdpfx Abewuvaiehjn
Total connected load:
S1 100%: 1.5 kW; S6 40%: 2.1 kW
Coolant pump motor power:
0.025 kW
Weight:
370 kg
Mali oglas
Witten
812 km
Sredinski stružnica in stružnica za vreteno
JESSEYKNIGHT 1550
Klic
Stanje: novo, Leto izdelave: 2025, Swing diameter over bed 400 mm
Swing diameter over cross-slide 246 mm
Turning length 1250 mm
Centre height 195 mm
Spindle bore 54 mm
Drive power 7.5 kW
- New machine -
- Handwheel on the left of the cross-slide
Rsdpowp Tbgefx Abhon
with 3-axis digital readout FAGOR INNOVA 30iT
and micrometer for bed
* For more information about the precise standard configuration and available options, please visit our website or contact us directly *
Mali oglas
Calbe (Saale)
683 km
Center stružnica
TOS TrenčínSUI 40
Klic
Stanje: dober (rabljeno), Well-maintained TOS TRENCIN SUI40-50 lathe
Centre distance: 1,500 mm
Swing over bed: 500 mm
Swing over cross slide: 320 mm
Roderwd Hzjpfx Abhon
Spindle speed: 14 to 2,240 rpm
The machine is operational and in good condition.
Mali oglas
Calbe (Saale)
683 km
Center stružnica
OptimumD320x920
Klic
Stanje: dober (rabljeno), Leto izdelave: 2007, Description
Leadscrew and feed shaft lathe OPTIMUM D320 x 920 SG
Centre height: 160 mm
Centre distance: 920 mm
Spindle speed: 65 – 1800 rpm, 18 steps
Swing over support: 178 mm
Swing over bed gap removed: 430 mm
Turning length in bed gap: 115 mm
Spindle taper: MT 5
Spindle mount: Camlock ASA D1-4
Spindle bore: 38 mm
Redpfxew A Rcze Abhen
Top slide travel: 85 mm
Cross slide travel: 165 mm
Tailstock taper: MT 3
Tailstock quill stroke: 110 mm
Longitudinal feed (32): 0
Olajšamo vam iskanje
Nove ponudbe prejmete takoj in brezplačno po e-pošti.
Iskalno nalogo lahko kadar koli preprosto končate.
Rabljeni vodni-/vlečni vretenasti stružnica, premer struženja nad posteljo 400–499 mm (222)
Zdaj preiščite celoten Machineseeker z več kot 200.000 rabljenimi stroji.Brskajte po najbolj priljubljenih poimenovanjih strojev:
- Cam Stružnica
- Da Stroj
- German
- Id 5005
- Mech Ploščo Strižne
- Multi Vretena Samodejno Stružnica
- Multi Vretena Stružnica
- Orodja Za Struženje
- Smetišče Tovornjak Z Nakladač




































































































































