Stružnica-konvencionalno-elektronska

BERNARDO SOLID 460-1000 DIGI PRO

Stanje: dober (rabljeno), Višina konic: 195 mm Razdalja med konicama: 1250 mm Maks. premer obdelave nad posteljo/vozičkom: 400/265 mm Vreteno/vrtina vretena: Camlock D1-6"/54 mm Stožec konjička: MK 5 Obrati vretena v 3 skupinah, brezstopenjsko nastavljivi: 0 - 2500 o/min Vzdolžni pomiki: 0,018 - 1,2 mm Prečni pomiki: 1/2 vzdolžnih pomikov 51 metričnih navojev: 0,2 - 14 mm 56 colskih navojev: 2 - 56 navojev/" 20 modulnih navojev: 0,2 - 3,5 modul 20 diametral pitch navojev: 8 - 56 DP Električni priklop: 400 V, 7,5 kW Teža: 1500 kg Dimenzije: 2500 x 1300 x 1300 mm Ihsdpfoxlg Dwex Af Tjt

Stanje: rabljeno, Leto izdelave: 1979, Technical details: Swing diameter over bed: 540 mm Turning length: 630 mm Distance between centers: 900 mm Center height over bed: 270 mm Center height over rear slide: 138 mm Swing diameter over rear slide: 250 mm Longitudinal travel: 700 mm Cross travel: 80 / 75 mm Spindle speeds: 1.8 - 450 rpm (8x stepless) Clamping diameter: 26 mm Feed range x-axis: 12 steps / 0.063 - 0.63 mm/rev Feed range y-axis: 36 steps / 0.070 - 1.11 mm/rev Tailstock quill: MT5 Tailstock quill travel: 250 mm Total power requirement: 7.0 kW Machine weight approx.: 3.76 t Dimensions (LxWxH) approx.: 3.2 x 1.2 x 1.8 m Application: Primarily for back turning and relief grinding of cutting tools (especially hobbing cutters, with or without thread pitch). Back turning and relief grinding possible from the front, the rear, and along the machine axis. Main drive via 8-step manual gearbox. Feed gearbox designed as a 12-step manual gearbox. Swivel range of the rear slide = 360°; Swivel range of the cross slide = 360°. Ihjdpjvbhv Rsfx Af Tst Chuck is a taper disk Ø 200mm with MT5. Equipment: Mandrel Ø 49.5 x 400mm ARBAH-L 3+1 measuring system FRENIC 5000G11 frequency inverter 3-jaw chuck Ø 250 mm in good condition.

Stanje: zelo dobro (rabljeno), Indexing Head Walter Type UPA 125 N (28487) Ijdjtrnndjpfx Af Tsht Direct and indirect dividing Centre height 125 mm Usable in both horizontal and vertical position Spindle taper MK 4 KKG 3 Travel spindle SPH 125 mm Mounting MK 2 Total transport weight 62 kg Indexing head 48 kg

Stanje: rabljeno, Leto izdelave: 1974, Technical Details: Swing diameter over bed: 500 mm Ihjdeu Ix Dcopfx Af Tet Swing diameter over cross slide: 300 mm Turning length: 2,100 mm Distance between centers: 2,000 mm Spindle bore: approx. Ø 60 mm Speed range: 35.5 - 1,800 / 18 steps rpm Rapid traverse X-axis: Slide 4.2 m/min Tailstock quill taper: MT 5 Tailstock quill travel: 180 mm Control voltage: 220 V Approx. machine weight: 3.25 t Approx. machine dimensions LxWxH: 3.5 x 1.2 x 1.6 m Thread cutting possible, e.g. metric threads, module threads, and inch threads Cross slide rapid traverse Chuck guard 2x chip pans Accessories: (see comparable on photo) 2x steady rests (1x closed and 1x open) Face plate 3-jaw chuck Jaw sets Flange Centers various gears

Stanje: novo, TC 205 x 1000 CVS Exhibition machine, color blue Technical Data: Swing over bed: 410 mm Centre height: 205 mm Swing over cross slide: 234 mm Swing in gap: 610 mm Bed width: 280 mm Between centers: 1000 mm Number of spindle speeds: 8 Speed range: 80 - 2000 rpm Spindle bore: 58 mm Spindle nose: D1-6 Camlock Spindle taper: MT 6 Tailstock quill travel: 130 mm Tailstock taper: MT 4 Max. tool size: 22 mm Cross slide travel: 225 mm Top slide travel: 130 mm Thread cutting imperial: 2 - 72 T.P.I Thread cutting metric: 0.2 - 14 mm Thread D.P.: 4 - 44 D.P. Thread module: 0.3 - 7 MOD Longitudinal feed: (24) 0.035 - 0.5 mm/rev metric (24) 0.0014 - 0.020 inch Cross feed: (24) 0.017 - 0.250 mm/rev metric (24) 0.0007 - 0.0100 inch Main motor power: 3.75 kW Coolant pump: 0.10 kW Weight, approx.: 1650 kg Equipment: - CSS for constant cutting speed - Flange - Fixed steady rest - Splashguard rear panel - 4-way tool post - Foot brake - Emergency stop switch - Coolant system - Chip tray - Fixed centre - Change gear set - Reducing bush for main spindle Ijdpfovzmtzox Af Tjht - Machine pads - Service tools - Operating manual

Stanje: novo, ELMAG INDUSTRIE 1000/230 HD Universal Gap Bed Lathe with Leadscrew and Feed Shaft 88173 Includes RÖHM chuck Includes 3-axis digital position display Includes quick-change tool post set, Multifix system Ready to operate: includes oil filling, cleaned of preservative (degreased), fully assembled, and tested Heavy-duty gap bed lathes, 5,500 watts: The quality of the INDUSTRIE 230 HD models is apparent from the moment you switch them on: barely audible drive noise. No vibrations even with heavy cutting depths. Indeed, the 230 HD models—at 2,635, 2,835, and 3,055 kg—are the heaviest in their class and, with their extremely robust construction, e.g. induction-hardened bed ways, are perfectly suited for heavy-duty and continuous operation. The 230 HD offers an extra-large spindle bore at 80 mm for working with bar stock up to 2 1/2" (76.1 mm) in diameter. A swing over cross slide of Ø 290 x 1,000, 1,500, or 2,000 mm and a maximum swing diameter of 460 or 700 mm meet virtually all demands in mechanical engineering, steel fabrication, plant construction, and toolmaking. Also features 12 spindle speeds, 170 longitudinal and cross feeds, and 150 leadscrew thread pitches for both metric and imperial threads. Standard equipment: - Digital position display included - RÖHM three-jaw chuck Ø 250 mm - Four-jaw independent chuck Ø 315 mm - Face plate Ø 350 mm - 2 fixed centering points - Live center MT 5 - Travelling steady - Fixed steady - 5-piece quick-change toolpost set, type MB - Thread dial indicator - Halogen machine lamp - Emergency stop button / no-voltage release - Chuck guard with safety interlock - Machine base / chip tray / splash guard - Tool kit / operation manual / CE Optional accessories: - Indexable insert turning tool set 25 x 25 mm, 7-piece - Indexable insert set, 7-piece for 25 x 25 mm turning tool set - 'Camlock' turning tool set 25 x 25 mm, 7-piece - Parting tool holder 25 x 25 mm, length 150 mm - Blade for parting tool holder 25 x 25 mm ADVANTAGES: - CE-compliant machines with highest level of safety and machine accuracy to DIN standards - Powerful and robust – suitable for commercial and industrial use - Integrated coolant tank and pump in machine base TECHNICAL DATA: Distance between centers 1000 mm Center height 230 mm Max swing over bed 460 mm Max swing over cross slide 290 mm Max swing without bridge 700 mm Bed width 340 mm Bridge length 200 mm Travel of cross slide 280 mm Travel of top slide 100 mm Max turning tool section 25x25 mm Chuck mount D1 - 8 Spindle fitting (turning spindle) MT 7 Spindle bore 80 mm Spindle speed range 25 - 1800 rpm Number of speed steps 12 Longitudinal feeds (170) 0.04 - 2.46 mm/rev Cross feeds (170) 0.02 - 1.23 mm/rev Iedpfx Afotw Dxks Toht Metric thread pitches (24) 0.5 - 20 mm Metric module pitches (20) 0.25 - 10 mm Imperial threads, TPI (61) 1-5/8 - 72 TPI Imperial module threads, TPI (45) 3-1/4 - 96 TPI Lead screw pitch 6 mm Lead screw diameter 40 mm Tailstock taper MT 5 Tailstock diameter 75 mm Tailstock stroke 130 mm Main motor power 5500 W Coolant pump 40 W Power supply 400/50 V/Hz Total length 2310 mm Total height 1255 mm Weight 2635 kg

Leto izdelave: 2010, Stanje: pripravljen za uporabo (rabljen), Swing diameter over bed/cross slide/saddle offset: 460mm/258mm/785mm, center distance: 1016mm, bed width: 300mm, spindle bore: 58mm, spindle speed: 2000rpm, leadscrew/quill diameter: 35mm/65mm, quill stroke: 127mm. Machine dimensions X/Y/Z: approx. 1900mm/850mm/1200mm, weight: approx. 1650kg. Documentation available. On-site inspection possible. Expected to be available from the end of May 2025. Isdpfswal H Aox Af Tjht

Stanje: dober (rabljeno), Leto izdelave: 2010, Conventional lathe, center height 254 mm, center distance 1000 mm, spindle bore Ø 80 mm, 12 speeds 30 - 2200 rpm, motor 5.5 kW, Camlock 6'', dimensions 230x115x165 cm, weight approx. 1750 kg; Equipment: 2-axis digital readout, coolant system, 3-jaw chuck Ø 250 mm, rotating live center, MULTIFIX C quick-change tool post with various holders, fixed and travelling steady rest, Ihsdetv Iy Espfx Af Tjt

Stanje: zelo dobro (rabljeno), Jaw width: 160 mm Jaw height: 50 mm Clamping width: 310 mm Iodped Hyfwofx Af Toht Overall height: 170 mm

Leto izdelave: 1987, Stanje: pripravljen za uporabo (rabljen), Na voljo je klasični stružni stroj Nardini z vodilnim in vlečnim vretenom. Obhodni premer nad posteljo/vozičkom: 440mm/260mm, dolžina struženja: 1380mm, konična cilindričnost na 100mm: 0,3mm, okroglost: 0,03mm, krožni tek: 0,03mm, pravokotnost na 100mm: 0,05mm. Ogled na lokaciji je možen. Ijdpfsxq Eyzox Af Tjht