Stružnica nakup rabljenega (3.103)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 352 mm, pomik po osi Z: 250 mm, največja hitrost vrtenja: 5.000 obr/min, model krmilnika: Fanuc Series 0i Mate-TD, Oprema: transportni trak za ostružke, TEHNIČNI PODATKI Premer struženja nad nosilcem orodja: 70 mm Pomik X: 352 mm Pomik Z: 250 mm Mesta za orodja: 8 Gbjdsx E Uzmjpfx Afqeg Prehod: 42 mm Maksimalno število vrtljajev: 5.000 vrt/min PODROBNOSTI STROJA Krmiljenje: Fanuc Series 0i Mate-TD OPREMA Strojna dokumentacija Vpenjalna glava D135 mm Vpenjalni tulec 173E Lovilec delov Transporter za ostružke

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, obratovalne ure: 19.441 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 6000816, stružna dolžina: 50 mm, največja hitrost vretena: 12.000 obr/min, prehod palice: 12 mm, model krmilnika: Mitsubishi TX-8i, največja hitrost protivretena: 12.000 obr/min, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Turning length: 50 mm Main Spindle Technology: Belt-driven spindle Speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Bar capacity: 12 mm Travel in Z1: 50 mm Workpiece clamping: Collet chuck Godpex Hxv Dsfx Afqjbg Sub Spindle Technology: Belt-driven spindle Speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Travel in X3/Z4: 222/139 mm Rapid traverse in X3/Z4: 15 m/min Workpiece clamping: Collet chuck Tool Carrier I (X/Y) Technology: Turret with 6 stations (fully driven) Tool holder: Ø25 mm Driven tool speed: 8,000 rpm, 1.5 kW, 2.4 Nm Travel in X1/Y1: 35/37.5 mm Rapid traverse in X1/Y1: 15 m/min Tool Carrier II (X/Z) Technology: Turret with 6 stations (fully driven) Tool holder: Ø25 mm Driven tool speed: 8,000 rpm, 1.5 kW, 2.4 Nm Travel in X2/Z2: 35/50 mm Rapid traverse in X2/Z2: 15 m/min Front Attachment Number of stations: 4 Tool holder: Ø28 mm Station pitch: 32 mm Driven tool speed: 12,000 rpm, 4 kW, 7 Nm Number of driven stations: 4 Travel in X3/Z3: 222/139 mm Rapid traverse in X3/Z3: 15 m/min Rear Attachment Number of stations: 4 Tool holder: Ø28 mm Station pitch: 32 mm Driven tool speed: 8,000 rpm, 1.5 kW, 2.4 Nm Number of driven stations: 4 Travel in X4: 39 mm Rapid traverse in X4: 15 m/min MACHINE DETAILS Control: Mitsubishi TX-8i Dimensions & Weight Spindle center height above floor: 1,050 mm Dimensions (L x W x H): 1,450 x 1,098 x 1,700 mm Dimensions (L x W x H) with standard coolant tank: 2,355 x 1,098 x 1,700 mm Weight with control cabinet, max. configuration: 2,000 kg Weight without control cabinet, max. configuration: 1,600 kg Weight with control cabinet, min. configuration: 1,200 kg Weight without control cabinet, min. configuration: 850 kg Operating Hours Control power-on hours: 19,441 h Automatic hours 1: 7,607 h Automatic hours 2: 6,720 h Production time: 38,989 h Total counter: 50,536 h EQUIPMENT Chip conveyor Coolant pump Bar feeder FMB minimag 3200 Workpiece discharge device (tube) Mechanically prepared interface Various fixed holders Rinsing pistol

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, premer struženja: 2.000 mm, višina središča: 1.000 mm, širina na sredini: 4.000 mm, največja hitrost vretena: 224 obr/min, teža obdelovanca (maks.): 12.500 kg, TEHNIČNI PODATKI Višina konic: 1.000 mm Premer struženja nad posteljo: 2.000 mm Razdalja med konicama: 4.000 mm Premer vretena: 100 mm Hitrost vretena: 11,2 - 224 obr./min Največja teža obdelovanca: 12.500 kg PODROBNOSTI STROJA Moč: 55 kW Gbjdsx Rbh Rspfx Afqsg Dimenzije & Teža Dimenzije (D x Š x V): 5.400 x 2.600 x 2.550 mm Lastna teža: 15.000 kg OPREMA Digitalni prikaz Acu-Rite 3-A

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 4209.08, premer struženja: 670 mm, največja hitrost vretena: 2.000 obr/min, potovalna razdalja osi X: 440 mm, pomik po osi Z: 2.000 mm, model krmilnika: Heidenhain Manual Plus 4110V2, DÉTAILS TECHNIQUES Diamètre de tournage max. : 670 mm Course axe X : 440 mm Course axe Z : 2 000 mm Avance rapide axe Z : 5 m/min Avance rapide axe X : 10 m/min Passage de broche : 106 mm Plage de vitesses : 1 – 2 000 tr/min Puissance broche : 33 kW Nez de broche : DIN 55026 – A8 Porte-outils: Support rapide Multifix type C Positions du tourelle : 1 Contre-pointe : CM5 DÉTAILS MACHINE Commande : Heidenhain Manual Plus 4110V2 Dimensions & Poids Dimensions machine (L x l x H) : 1,9 m + entre-pointes x 2,1 m x 1,9 m Dimensions armoire électrique (L x l x H) : 1,2 m x 0,5 m x 1,6 m Poids : 5 100 kg ÉQUIPEMENT Interface Ethernet et USB pour connexion réseau Convoyeur à copeaux Lunette fixe et lunette à suivre Mandrin 3 mors auto-centrant (diamètre 400 mm) Mandrin 4 mors indépendant (diamètre 600 mm) Plateau (diamètre : 650 mm) Différents mors de serrage et mors rapportés Pointes fixes et tournantes Env. 30 porte-outils Multifix type C Mandrin de perçage avec cône MK5 Gjdpfxsx Ex A Uj Afqobg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, obratovalne ure: 10.810 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 1.000 mm, premer struženja: 300 mm, potovalna razdalja osi X: 235 mm, pomik osi Y: 1.144 mm, največja hitrost vrtenja: 4.500 obr/min, TEHNIČNI PODATKI Dolžina struženja: 1.000 mm Gedpfex Exqfsx Afqobg Premer struženja: 300 mm Premer vretena: 68 mm Pomik osi X: 235 mm Pomik osi Z: 1.144 mm Revolver: 12 mest – vsi gnani Hitrost vrtenja: 45 – 4.500 obr/min Nosilec orodij: VDI 40 PODROBNOSTI O STROJU Čas vklopa: 33.509 h NC delovni čas: 10.810 h Čas vrtenja vretena: 9.643 h Krmilje: OSP P300L-R Teža: 6.300 kg Potrebna postavitvena površina: 3,55 m x 2,35 m x 1,93 m OPREMA Transporter za ostružke Vpenjalna glava (premer: 250 mm) Touchsetter Konjiček

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 100277, premer struženja: 340 mm, največja hitrost vretena: 4.500 obr/min, potovalna razdalja osi X: 280 mm, pomik osi Y: 120 mm, pomik po osi Z: 500 mm, TEHNIČNI PODATKI X-os: 280 mm Y-os: 120 mm Z-os: 500 mm C-os: 360° (0,0001) Hitrost vretena: 4.500 min⁻¹ Premer vretena: 62 mm Premer vpenjalne glave: 10 palcev PODROBNOSTI O STROJU Krmilnik: OSP U 100 L Teža: 6.000 kg Godpfx Aex I Axrjfqebg OPREMA Pogonska orodja Transporter za odrezke Transformator Priročniki

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, višina središča: 155 mm, skupna dolžina: 1.632 mm, skupna širina: 770 mm, skupna višina: 540 mm, največja hitrost vretena: 2.500 obr/min, hitrost vretena (min.): 50 obr/min, širina postelje: 190 mm, skupna masa: 360 kg, premer trikrake glave: 160 mm, Podkonstrukcija ni vključena, lahko pa se doda. Gbodpex Tr Rzofx Afqeg Obseg dobave: Trivpenjalno stružniško glavo Ø 160 mm, št. 4 Zmanjševalna puša MK 5 / MK 3 Dve nepremični centri MK 3 Štirikratni jekleni nosilec 25 mm Komplet izmenjalnih zobnikov Prva napolnitev stroja s kakovostnim oljem Orodje za upravljanje

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, obratovalne ure: 7.984 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1408, stružna dolžina: 250 mm, premer struženja: 340 mm, največja hitrost vretena: 4.500 obr/min, prehod palice: 65 mm, model krmilnika: Okuma OSP7000L, No reserve price – guaranteed sale to the highest bidder! Gbjdpfx Afox Hx Dnsqog TECHNICAL DETAILS Max. turning diameter: 340 mm Max. turning length: 250 mm Main Spindle Technology: Motor spindle Speed: 4,500 rpm Power (max.): 22 kW Bar capacity: 65 mm Workpiece clamping: 3-jaw chuck, Kitagawa B-210 Tool Turret I (X/Z) Technology: 12-position turret Tool holder: VDI40 Travel in X: 260 mm Travel in Z: 640 mm Rapid traverse in X: 15 m/min Rapid traverse in Z: 20 m/min Tool Turret II (X/Z) Technology: 8-position turret Tool holder: VDI40 Travel in X: 140 mm Travel in Z: 615 mm Rapid traverse in X: 15 m/min Rapid traverse in Z: 20 m/min MACHINE DETAILS Control: Okuma OSP7000L Dimensions & Weight Dimensions (L x W x H): 3,305 x 2,100 x 1,927 mm Weight: 4,800 kg Electrical Connection Data Rated voltage: 400 V Number of phases: 3 Frequency: 50 Hz Power consumption: max. 30 kVA Total current: 43.4 A Motor current: max. 106 A Operating Hours Power-on hours: 36,348 h Cutting time: 7,984 h Spindle running time: 8,674 h EQUIPMENT Chip conveyor Coolant pump Automatic measuring arm Transformer

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1990, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 190 mm, izvrtina vretena: 56 mm, stružna dolžina: 1.000 mm, Prodajam rabljeni stružni stroj Weiler Commodor, letnik cca. 1990 Dolžina struženja: 1000 mm Gbodpfxsxzu Ipo Afqsg Premer struženja nad ležiščem: 380 mm Premer struženja nad suportom: 190 mm Premer vretena: 56 mm Hitrost vretena: 25-2000 vrt/min Konjiček: MK4 Oprema: 2-osni digitalni prikazovalnik Heidenhain Trivrata vpenjalna glava 200 mm Hitromenjalni Multifix z 1 držalom za orodje Naprava za hlajenje Vzdolžni in prečni podajalnik Strojne noge Različni vpenjalni ključi Mejni prislon ležišča Valjčni centri Popolna dokumentacija

Stanje: dober (rabljeno), In good technical condition and fully operational. Year of manufacture: 1974 with overhaul including comprehensive modernization (retrofit) of the CNC control system, featuring automatic central lubrication of the axes and hydraulic systems, water cooling, conductive rollers with brushes for a system enabling possible workpiece welding, and complete protection against flying chips. Heidenhain manual plus 4110 control system. Swing diameter over bed: 1250 mm, over support: 900 mm. Gbedpfxsx Ttlae Afqog Max. workpiece weight: 14,000 kg. Max. workpiece length: 3,000 mm. Machine weight: 16,350 kg. Machine power: 80 kW. Machine dimensions: width 3,000 mm, height 2,100 mm, length 8,000 mm. Accessories: faceplate incl. handles, steady rest, raised tool head, universal chuck. Complete technical documentation, service history, and records of revisions and maintenance included.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Swing diameter over bed 32 mm Spindle bore 32 mm Turning length 125 mm Control YASKAWA SIEMENS 840 DI V2 Spindle speeds 7,000 rpm Gbodpfxjxq Hk Uo Afqog Workpiece length – max. 150 mm Clamping diameter 32 mm Feed rate 0 – 2,000 mm/min Machine weight approx. 5.7 t Space required approx. 10.5 x 2 x 1.9 m The sliding headstock automatic lathe is in good condition, ready for immediate use, and is supplied with tool holders and spare parts. >> There are two identical STAR 32T sliding headstock automatic lathes available.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, največja hitrost vretena: 2.000 obr/min, premer struženja: 800 mm, stružna dolžina: 750 mm, model krmilnika: Fanuc Oi-Td, Oprema: transportni trak za ostružke, TEHNIČNI PODATKI Gjdpsx I Augefx Afqsbg Premer struženja: 800 mm Dolžina struženja: 750 mm Moč vretena: 30 kW Hitrost vretena: 2000 vrt/min Postaje revolverja: 12 Velikost vpenjalne glave: 21" PODROBNOSTI STROJA Krmiljenje: Fanuc Oi-Td Teža stroja: 9.800 kg OPREMA Transporter za ostružke

Stanje: rabljeno, Leto izdelave: 2007, proizvajalec krmilnikov: Siemens, model krmilnika: 840 D, Description: General: Year of manufacture: 2007 Control: Siemens 840 D Bar capacity: 65 mm Turning diameter: 250 mm Turning length: 650 mm Main spindle: Technology: Motor spindle Speed: 5,000 rpm Max. power: 35 kW Max. torque: 370 Nm C-axis: 0.001° Bar capacity: 65 mm Chuck: Hainbuch Spanntop size 65 Chuck cylinder: Hollow clamping cylinder Sub spindle: Technology: Motor spindle Speed: 5,000 rpm Power: 26 kW Torque: 290 Nm C-axis: 0.001° Chuck: Hainbuch Spanntop size 65 Chuck cylinder: Semi-hollow clamping cylinder Z-axis: 670 mm X-axis: 175 mm Turret I (X/Y/Z): Technology: Tool turret, 12 stations Tool holder: VDI 30 Driven tools: 4,000 rpm, 11 kW, 28 Nm X-axis: 300 mm Y-axis: 80 mm (+ / - 40 mm) Z-axis: 650 mm Turret II (X/Z): Technology: Tool turret, 12 stations Tool holder: VDI 30 Driven tools: 4,000 rpm, 11 kW, 28 Nm X-axis: 180 mm Z-axis: 650 mm Equipment / Accessories: Chip disposal: Chip conveyor Coolant supply: High-pressure coolant system Measuring systems: Direct in all X-axes (glass scales) Bar feeder: IRCO Breuning Parts discharge: Finished parts gripper + transfer belt Emulsion mist separator: Mechanical Setup mode: Electronic handwheel Gedpfjxtr Iwex Afqsbg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Swing diameter over bed: 32 mm Spindle bore: 32 mm Gbjdpfxovwgmye Afqog Turning length: 125 mm Control: YASKAWA SIEMENS 840 DI V2 Clamping diameter: 32 mm Spindle speeds: 7,000 rpm Workpiece length – max.: 150 mm Feed rate: 0 – 2,000 mm/min Machine weight: approx. 5.7 t Required space: approx. 10.5 x 2 x 1.9 m The sliding headstock automatic lathe is in good condition, fully operational, and will be supplied with toolholders and spare parts. >> Two identical STAR 32T sliding headstock automatic lathes are available.

Stanje: rabljeno, Leto izdelave: 2011, proizvajalec krmilnikov: Mitsubishi, model krmilnika: TX-8i, Description: Main Spindle: Technology: Belt-driven spindle Speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Godpfx Afjx E Inmsqsbg Bar capacity: 15 mm Travel in Z1: 50 mm Workpiece clamping: Collet chuck Sub Spindle: Technology: Belt-driven spindle Speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Travel in X3/Z4: 222/139 mm Rapid traverse in X3/Z4: 15 m/min Workpiece clamping: Collet chuck Tool Carrier I (X/Y): Technology: 6-station turret (driven tools) Tool holder: ø25 mm Tool drive: 8,000 rpm, 1.5 kW, 2.4 Nm Travel in X1/Y1: 35/37.5 mm Rapid traverse in X1/Y1: 15 m/min Tool Carrier II (X/Z): Technology: 6-station turret (driven tools) Tool holder: ø25 mm Tool drive: 8,000 rpm, 1.5 kW, 2.4 Nm Travel in X2/Z2: 35/50 mm Rapid traverse in X2/Z2: 15 m/min Front Attachment: Number of stations: 4 Tool holder: ø28 mm Station pitch: 32 mm Tool drive: 12,000 rpm, 4 kW, 7 Nm Number of driven stations: 4 Travel in X3/Z3: 222/139 mm Rapid traverse in X3/Z3: 15 m/min Rear Attachment: Number of stations: 4 Tool holder: ø28 mm Station pitch: 32 mm Tool drive: 8,000 rpm, 1.5 kW, 2.4 Nm Number of driven stations: 4 Travel in X4: 39 mm Rapid traverse in X4: 15 m/min Equipment/Accessories: Chip management: Chip conveyor Coolant management: Coolant pump Raw material feed: Bar loader, FMB Minimag 20/3200 Finished part discharge: Workpiece discharge unit (tube) Emulsion mist extraction: Mechanical interface prepared Tool holders: Various static and driven holders

Stanje: rabljeno, Leto izdelave: 2014, proizvajalec krmilnikov: Siemens, model krmilnika: 840 Dsl, Opis: Splošno: Leto izdelave: 2014 Krmiljenje: Siemens 840 Dsl Premer struženja: 120 mm Dolžina struženja: 380 mm Premer prehoda palice: 32 mm Glavno vreteno: Tehnologija: Jermensko vreteno Število obratov: 8.000 obratov/min Premer prehoda palice: 32 mm C-os: 0,001° Nasprotno vreteno: Tehnologija: Jermensko vreteno Število obratov: 8.000 obratov/min Premer prehoda palice: 32 mm C-os: 0,001° Nosilec orodja: Tehnologija: Revolverski nosilec orodja Število postaj: 16 Pogon orodja: 8 postaj Število obratov: 6.000 obratov/min Vpenjalni sistem za orodje: VDI 16 X-os: 400 mm Z-os: 400 mm Gsdpfjxy Ub Hox Afqjbg Avtomatizacija: Tehnologija: Industrijski robot Proizvajalec: Fanuc Tip: ARC Mate 100iC 6L Oprema / dodatki: Merilni sistemi: Neposredno v osi X/Z Merilna sonda: Marposs T18 Sistem za dovajanje hladilne tekočine: Minimalno mazanje Avtomatizacija: Robot Fanuc sistem

Stanje: rabljeno, Leto izdelave: 2021, proizvajalec krmilnikov: Siemens, model krmilnika: 828D - ShopTurn, Opis: Glavna vretena: Tehnologija: vreteno s pogonom preko remena Broj obrtaja: 3.000 o/min Snaga (maks.): 42 kW Maksimalni obrtni moment: 858 Nm Gbedpfxsxybxfs Afqog Prolaz šipke: 91 mm Stezanje obratka: trovilni stezni uložak, Samchully HS-12 Nosač alata (X/Z): Tehnologija: revolver sa 12 stanica Prihvat alata: BMT65 Pogonski alat: 5.000 o/min, 5,6 kW, 40 Nm Hod u X/Y/Z: 245/1.040 mm Brzi hod u X/Y/Z: 24/30 m/min Repasto vreteno: Tehnologija: pomično sa hidrauličnom pinolom Konus: MT5 Prečnik pinole: 110 mm Hod: 100 mm Oprema/dodatna oprema: Upravljanje strugotinom: transporter strugotina Upravljanje rashladom: IKZ pumpa sa uljnim separatorom i visokim pritiskom, 10 bara Merenje alata: automatska merni ruka, Marposs Dovod sirovine: interfejs za automatski ulagač šipki pripremljen Izlaz gotovih delova: hvatač delova sa kutijom za prikupljanje Odvodnja uljne magle: mehanički interfejs pripremljen Ručni režim: elektronski ručni točkić Dodatna oprema: pištolj za ispiranje

Stanje: rabljeno, Leto izdelave: 2023, proizvajalec krmilnikov: Siemens, model krmilnika: 828D - ShopTurn, Opis: Glavno vreteno: Tehnologija: Jermensko vreteno Število obratov: 6.000 min⁻¹ Moč (max.): 18,5 kW Premer prehoda: 52 mm Vpenjanje obdelovanca: 3-čeljustna glava, Samchully MH-206 V1 Godpfxjxybxxs Afqobg Nosilec orodja: Tehnologija: Revolverska glava z 12 postajami Vpenjanje orodja: BMT55 Pogonsko orodje: 5.000 min⁻¹ Oprema/dodatki: Upravljanje odrezkov: Transporter odrezkov Upravljanje hladilne tekočine: IKZ črpalka z oljnim skimmerjem in visokim tlakom, 10 bar Merjenje orodja: Avtomatska merilna roka Avtomatizacija: pripravljeno Odvod končnih kosov: Lovilec kosov s škatlo za zbiranje Nastavitveni način: Elektronsko ročno kolo

Stanje: rabljeno, Leto izdelave: 2015, proizvajalec krmilnikov: Fanuc, Beschreibung: Allgemein: Baujahr: 2015 Steuerung: Fanuc 32iB Werkstückdurchmesser max.: 200 mm Werkstücklänge max.: 200 mm Spindel: Technologie: Motorspindel Drehzahl: 4.500 U/min Leistung (ca.): 22 kW Drehmoment: 256 Nm C-Achse: 0,01° Spannfutter: 3-Backenfutter KNCS-N 210-52 Werkzeugträger (X/Y/Z): Technologie: Werkzeugrevolver Anzahl der Stationen: 12 Stück Werkzeugaufnahme: VDI 40 Werkzeugantrieb: 6.000 U/min, 8,5 kW, 40 Nm X-Achse: 760 mm Y-Achse: 60 (+/- 30) mm Z-Achse: 415 mm Werkstückspeicher: Technologie: Schlepprahmenband/Pick-up Werkstückmenge (max.): 20 Stück Werkstückhöhe (max.): 200 mm Gsdex Ih R Hepfx Afqjbg Werkstückgewicht (max.): 20 kg Ausstattung / Zubehör: Späneentsorgung: Späneförderer Kühlmittelversorgung: Hochdruckpumpe mit Filter Werkstückvermessung: Messtaster Werkzeughalter angetrieben: 4 Stück Werkzeughalter statisch: 8 Stück Spannfutter: 3-Backenfutter KNCS-N 210-52

Stanje: rabljeno, Description: Main Spindle: Technology: Belt-driven spindle with gearbox Speed: 1,000 rpm Power: 45 kW Torque: 4,008 Nm Bar capacity: 205 mm Workpiece clamping I: 3-jaw chuck, Autogrip AP-230 ø535 mm Workpiece clamping II: Manual 3-jaw chuck, Chandox SK20 (rear of spindle head) Tool Carrier (X/Y/Z): Technology: Turret with 12 stations Tool holder: BMT 75 Driven tool speed: 3,000 rpm, 7 kW, 83 Nm Travel X/Y/Z: 340/160/3,250 mm Rapid traverse X/Y/Z: 20/7/12 m/min Tailstock: Technology: Programmable quill drag-type tailstock Quill stroke: 150 mm Taper: MT5 Equipment/Accessories: Chip management: Chip conveyor Coolant management: High-pressure coolant pump (IKZ) Tool measurement: Measuring arm, Renishaw RP3 Oil mist extraction: Mechanical separator, make AR Filtrazioni ARNO 3VF YF Shaft machining: Manual steady rest, ø150-300 mm Godpfx Aowt Iwqofqsbg Tool holders: Various static and driven holders Setup mode: Electronic handwheel Additional features: Automatic door (pneumatic), transformer, oil skimmer Further accessories: Various jaws and EWS quick-change inserts

Stanje: rabljeno, Leto izdelave: 2013, proizvajalec krmilnikov: Siemens, model krmilnika: 840Dsl, Description: Main Spindle: Technology: Motor spindle Speed: 5,000 rpm Power (max.): 29 kW Torque (max.): 250 Nm Bar capacity: 65 mm Workpiece clamping: Collet chuck, Hainbuch Spanntop nova Kombi Axzug size 65 Counter Spindle: Technology: Motor spindle Speed: 7,000 rpm Power (max.): 22 kW Torque (max.): 130 Nm Workpiece clamping: 3-jaw chuck, SMW Autoblok KNCS-N-225-66 Part ejector: Pneumatic Travel in Z: 750 mm Tool Carrier I (X/Y/Z): Technology: 12-station turret Tool holder: VDI30 Driven tool capacity: 4,000 rpm, 6.7 kW, 25 Nm Travel in X/Y/Z: 270/100/750 mm Rapid traverse in X/Y/Z: 24/10/30 m/min Tool Carrier II (X/Z): Technology: 12-station turret Tool holder: VDI30 Driven tool capacity: 4,000 rpm, 6.7 kW, 25 Nm Travel in X/Z: 205/750 mm Rapid traverse in X/Z: 24/30 m/min Equipment/Accessories: Chip management: Chip conveyor Coolant management: High-pressure coolant pumps, 14 bar Raw material feeding: Short bar loader, EMCO LM 1200 Gbjdpew Tg Adjfx Afqsg Finished parts removal: Pneumatic workpiece pick-up unit with conveyor belt Oil mist extraction: Mechanical separator, manufacturer Absolent Tool holders: Various fixed and driven holders Additional equipment: Spindle cooling unit

Stanje: rabljeno, Description: Spindle: Technology: Motor spindle Speed: 6,000 rpm Gbedpfxov S Dnks Afqeg Power (max.): 39 kW Torque (max.): 460 Nm Clamping cylinder: Full clamping cylinder Workpiece clamping: 3-jaw chuck, SMW Autoblock, KNCS-NB-260-72 Tool Carrier I: Technology: Turret with 12 stations Tool holder: VDI 40 Tool drive: 6,000 rpm, 7.5 kW, 24 Nm Tool Carrier II: Technology: Drilling station with internal coolant supply Tool holder: Capto C8 General: Travel path in X/Z: 1,180/525 mm Rapid traverse in X/Z: 60/30 m/min Equipment/Accessories: Position measuring system: Direct in X/Z (glass scale) Chip management: Chip conveyor Coolant management: High-pressure internal coolant system (IKZ) with paper belt filter Tool breakage monitoring: ARTIS CTM Automation: Rotating workpiece magazine, L version Oil mist extraction: Interface prepared for electrostatic separator

Stanje: rabljeno, Description: General: Year of manufacture: 2008 Control: Fanuc 18i-TB Turning diameter: 130 mm Turning length: 110 mm Swing diameter: 200 mm Max. workpiece height: 110 mm Spindle: Technology: Motor spindle Speed: 7,500 rpm Power: 24 kW Torque: 158 Nm C-axis: 0.001° Gbjdpfowkcldex Afqjg Clamping cylinder: Full clamping cylinder Tool turret (X/Z): Technology: Star turret Number of stations: 12 positions Tool holder: VDI 40 Tool drive: 6,000 rpm, 40 Nm X-axis travel: 400 mm Z-axis travel: 200 mm Equipment / Accessories: Position measuring systems: Direct (glass scales) Chip disposal: Chip conveyor Coolant supply: High-pressure pump Automation: Peripheral workpiece storage Emulsion mist extraction: Mechanically pre-installed

Stanje: rabljeno, Leto izdelave: 2023, proizvajalec krmilnikov: Siemens, model krmilnika: 828D - ShopTurn, Description: Main Spindle: Technology: Belt-driven spindle Speed: 4,500 rpm Power (max.): 20 kW Torque (max.): 169 Nm Bar capacity: 67 mm Workpiece clamping: 3-jaw chuck, Samchully MH-208 BVI Gbedpfx Aoxv Nllefqsg Sub Spindle: Technology: Motor spindle Speed: 6,000 rpm Power (max.): 7.8 kW Torque (max.): 45 Nm Workpiece clamping: 3-jaw chuck, Samchully HS-06VI B-axis travel: 580 mm Rapid traverse in B: 24 m/min Turret 1 (X/Y/Z): Technology: 12-station turret Tool mounting: BMT55 Driven tool specification: 5,000 rpm, 9.3 kW, 44 Nm Travel in X/Y/Z: 235/105/580 mm Rapid traverse in X/Y/Z: 24/10/30 m/min Equipment/Accessories: Chip management: Chip conveyor Coolant management: High-pressure coolant pump with oil skimmer, 10 bar Tool measurement: Automatic measuring arm Raw material feed I: Bar feeder interface prepared Raw material feed II: Automatic work area door and robot interface prepared Finished parts removal: Parts catcher with collection box Setup mode: Electronic handwheel Additional equipment: Transformer

Stanje: rabljeno, Leto izdelave: 2007, proizvajalec krmilnikov: Siemens, model krmilnika: 840 D, Description: General: Year of manufacture: 2007 Control: Siemens 840 D Turning diameter: 100 mm Turning length: approx. 580 mm Bar capacity: 32 mm Gbsdpfxexzmp Eo Afqog Main spindle: Technology: Motor spindle Speed: 8,000 rpm Max. torque: 100 Nm Max. power: 26 kW C-axis: 0.001° Bar capacity: 32 mm Clamping cylinder: Hollow clamping cylinder Chuck: Hainbuch Spanntop Counter spindle: Technology: Motor spindle Speed: 8,000 rpm Max. torque: 100 Nm Max. power: 26 kW C-axis: 0.001° X-axis: 145 mm Z-axis: 380 mm Clamping cylinder: Semi-hollow clamping cylinder Chuck: Hainbuch Spanntop Turret I (X/Y/Z): Technology: Tool turret Number of stations: 12 positions Tool mounting: VDI 25 Tool drive: 6,000 rpm X-axis: 220 mm Y-axis: 60 (+/- 30) mm Z-axis: 320 mm Turret II (X/Z): Technology: Tool turret Number of stations: 12 positions Tool mounting: VDI 25 Tool drive: 6,000 rpm X-axis: 120 mm Z-axis: 345 mm Equipment / Accessories: Chip disposal: Chip conveyor Coolant supply: High-pressure coolant system (IKZ unit) Bar feeder: Irco Breuning Parts removal: Parts gripper + transfer belt Tailstock: 250 mm travel, quill MK 3 Chuck: 2x Hainbuch Spanntop Tool holders: Various driven and static holders