Ciklična Stružnica nakup rabljenega (3.107)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, Ciklični stružnica WEILER Tip E 50 / 1 Leto izdelave 1997 Višina konic 280 mm Razdalja med konicama 1000 mm Premer struženja nad ležiščem 570 mm Premer struženja nad suportom 340 mm Premer struženja 500 mm Vrtljaji vretena 0 - 2500 obr/min Vpenjalna glava Nkedpfx Adsydlhmjyet Na voljo takoj z univerze.

Stanje: rabljeno, CNC Cycle-Controlled Lathe HARRISON Type Alpha 400 Plus Machine No.: P30180/150 Year of manufacture: 1998 Njdpfxsh Hvk As Adyskt Centre distance: 1250 mm Swing over bed: 400 mm Centre height: 200 mm Swing over cross slide: 245 mm Max. workpiece diameter in bed gap: 585 mm Bed width: 313 mm Cross slide travel (X-axis): 250 mm Tailstock quill diameter: 73 mm Tailstock quill stroke: 140 mm Tailstock taper: MT 5 Spindle bore: 54 mm Spindle nose: Camlock D1 size 6 Spindle speed: 20-2500 rpm Spindle speed ranges: - Range 1: 15-275 rpm - Range 2: 35-795 rpm - Range 3: 110-2500 rpm Feed rate X and Z: 0.03-0.6 mm/rev Rapid traverse X-axis: max. 2000 mm/min Rapid traverse Z-axis: max. 4000 mm/min Thread cutting function: Metric / Inch / Diametral / Module Spindle drive power: 7.5 kW Electrical connection: 400 Volt, 50 Hz, 23.5 kVA - Cycle control: Harrison Alpha / GE FANUC – operating language in French (France) - Automatic 3-stage gearbox (15-275, 35-795, 110-2500 rpm) - Electronic handwheels with selectable graduation (1/10/100) - 3-jaw scroll chuck FORKARDT Ø 250 mm, type CSN, 1 set soft top jaws - Quick-change tool post MULTIFIX size B with 2 tool holders - 1 revolving centre - 1 quick-action drill chuck RÖHM, 3-16 mm - Foldable chuck guard - Hinged work area safety doors - Chip tray with coolant system under machine bed - Switch cabinet fixed to the machine - RS 232 interface Floor space (L x W x H): 2600 x 1450 x 1550 mm Weight: 1950 kg In good condition

Leto izdelave: 1996, Stanje: pripravljen za uporabo (rabljen), Na voljo je ciklično krmiljeni CNC stružni stroj Gildemeister. Razdalja med konicami: 1500 mm, maks. dolžina struženja: 1500 mm, premer struženja nad ležiščem/na sani: 500 mm/290 mm, hitrost vrtenja: 2800 vrt/min, vretenina izvrtina: 70 mm, vretenin navor: 1050 Nm, pomik X/Z: 260 mm/1600 mm, hitro pomikanje X/Z: 6 m/8 m/min, pomik: 5 m/min, sila pomika: 5 kN, hod pinole konjička: 180 mm, premer pinole konjička: 80 mm. Dimenzije stroja X/Y/Z: ca. 3200 mm/1800 mm/1900 mm, masa: ca. 3100 kg, delovnih ur: 79727 h. Dokumentacija je na voljo. Ogled na lokaciji možen. Nsdpex Uq Uhefx Adyekt

Stanje: dober (rabljeno), Leto izdelave: 2009, 1 used CNC lathe Manufacturer: DMT/Kern Model: CD 480 x 3000 Year of manufacture: 2009 Control system: Manual Plus 620 Technical specifications: Center height: 230 mm Swing diameter over bed: 475 mm Distance between centers: 3000 mm Cross slide travel: 255 mm Spindle head: DIN 55026/6 Spindle bore: 82 mm Connected load: 30 kW Turret tool holder: VDI 40 Equipped with: Nsdpfx Adou A Ducjyekt - Turret - Hinged belt conveyor - Complete documentation available! The machine is fully operational and can be inspected under power on site!

Stanje: zelo dobro (rabljeno), Swing diameter over bed: 410 mm Centre distance: 1,000 mm Spindle speeds: 4–3,000 rpm Nkjdpfok D S Rqex Adyet Control: WEILER Various accessories MARCELS MASCHINEN CH

Stanje: zelo dobro (rabljeno), Z osjo C Z pogonjenimi orodji Nkjdpsx A E H Sjfx Adyot Premer struženja nad ležiščem: 400 mm Razdalja med konicama: 1000 mm Vretenove hitrosti: 1–3.000 o/min Krmiljenje: SIEMENS 840D SL Shop Turn Različen pribor MARCELS MASCHINEN CH

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Premer struženja nad posteljo: 7100 mm Višina med konicama: 350 mm Razdalja med konicama: 3000 mm Teža obdelovanca med konicama: 2000 kg C-os: +/- 0,05° Hitrost vretena: 2-1850 min⁻¹ Nodsx A Exbopfx Adyjkt Krmiljenje: SIEMENS 840D Shop Turn Transporter za odrezke Razna dodatna oprema MARCELS MASCHINEN CH

Leto izdelave: 2001, Stanje: zelo dobro (rabljeno), Control: SIEMENS Nkedjlawakspfx Adyjt Swing diameter over bed: 350 mm Turning diameter: 180 mm Distance between centers: 500 mm Spindle speed: 4000 rpm Tailstock Multifix quick-change tool post Accessories

Stanje: dober (rabljeno), Swing diameter over bed: 270 mm Centre height: 125 mm Nedpfotwpyaex Adyekt Distance between centres: 600 mm Spindle speeds: 30–5000 rpm Control: FANUC 18i Manual Guide Various accessories MARCELS MASCHINEN CH

Stanje: zelo dobro (rabljeno), Swing diameter over bed 330 mm Centre distance 750 mm Nkjdoud Naqspfx Adyot Spindle speeds 1–4,500 rpm Control: WEILER C3 Various accessories MARCELS MASCHINEN CH

Stanje: zelo dobro (rabljeno), Swing diameter over bed 212 mm Distance between centers 750 mm Spindle speeds 10–4,000 rpm Nsdpfxoud Nb Ie Adyskt Control: HEIDENHAIN Manual Plus Various accessories MARCELS MASCHINEN CH

Stanje: zelo dobro (rabljeno), Odlično stanje, redno vzdrževano (računi na voljo), veliko dodatne opreme! Nsdpfoxw D S Aox Adyekt

Stanje: rabljeno, Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, pomik po osi Z: 1.219 mm, največja hitrost vrtenja: 2.000 obr/min, prehod prečnega vozička: 203 mm, Flat Bed Lathe Manufacturer: Haas Model: TL-2 S/N: XXXXX Year of manufacture: 08-2005 Operating hours: n/a Control: Haas CNC Technical specifications: ----- - 4-position rapid-change tool post, Parat system Nksdpfx Aowftdmodyst - Z-axis travel: 1,219 mm - X-axis travel: 203 mm - Swing over bed: 406 mm - Swing over cross slide: 282 mm - Spindle bore: 76 mm - Spindle speeds: 10 - 2,000 rpm - Coolant system - Tailstock / MT 4 - Weight: 2,100 kg Accessories: ----- - 3x Parat tool holders - 3-jaw chuck - Documentation

Leto izdelave: 1997, Stanje: zelo dobro (rabljeno), PBR T35SNC x 3000 CNC Cycle Lathe Year of manufacture: 1997 Control: Fagor Centre distance: 3000 mm Max. turning diameter: 630 mm Nksdpeil Hzzefx Adyet Centre height over bed: 300 mm Centre height over cross slide: 165 mm Spindle bore: 105 mm Speed: 2000 rpm Weight: 6200 kg Accessories included: Multifix set (without tool holders), chuck (see photos) + additional chuck. No guarantee is given for the correctness, completeness and up-to-dateness of the information provided.

Stanje: zelo dobro (rabljeno), Swing diameter over bed 320 mm Centre distance 800 mm Spindle speeds up to 4000 rpm Control: HEIDENHAIN Manual Plus M Various accessories MARCELS MASCHINEN CH Nkedpoi Ezhqjfx Adyot

Leto izdelave: 2013, Stanje: dober (rabljeno), Swing diameter over bed 380 mm Centre distance 700 mm Spindle speeds up to 2500 rpm Control: SIEMENS Optica Various accessories Nkodjhp Razjpfx Adyst MARCELS MASCHINEN CH

Stanje: zelo dobro (rabljeno), Swing diameter over bed 1000 mm Distance between centers 2000 mm Nkjdewhkdcjpfx Adyjt Center height 500 mm Swing diameter over cross slide 700 mm Spindle bore 128 mm Spindle speeds 6.4–1,600 rpm SIEMENS 810 D control system Various accessories MARCELS MASCHINEN CH

Stanje: pripravljen za uporabo (rabljen), Na voljo je ciklično krmiljeni CNC stružni stroj Microcut serije BNC. Dolžina struženja: 2000 mm, premer vpenjalne glave: 400 mm, premer struženja nad posteljo/vozičkom: 610 mm/330 mm, hitrost vrtenja: 2500 obr/min, število orodnih mest: 8. Dimenzije stroja X/Y/Z: ca. 4000 mm/2300 mm/1800 mm, teža: ca. 4500 kg. Dokumentacija je na voljo. Ogled na lokaciji je možen. Nksdpfx Aoxr Nviodyot

Leto izdelave: 1993, Stanje: pripravljen za uporabo (rabljen), Višina konice: 280 mm, razdalja med konicama: 2000 mm, premer struženja nad posteljo/na vozičku: 570 mm/365 mm, vretenina odprtina: 62 mm, število vrtljajev: 2500 obr/min, maksimalna teža obdelovanca: 1000 kg, širina postelje: 360 mm. Dimenzije stroja X/Y/Z: pribl. 4000 mm/2250 mm/2000 mm, teža: pribl. 5500 kg, krmilje: Siemens. Ogled na lokaciji je možen. Nksdpfx Aoxq Eyusdyet

Stanje: potreben popravila (rabljeno), Leto izdelave: 1997, Funkcionalnost: omejena funkcionalnost, stružna dolžina: 1.000 mm, premer struženja: 365 mm, premer struženja nad ležiščem sani: 570 mm, vrtljajska hitrost (min.): 3 obr/min, največja hitrost vrtenja: 2.500 obr/min, model krmilnika: NUM 1062, No reserve price – guaranteed sale to the highest bidder! Condition: Mechanically very good, old CRT monitor defective TECHNICAL DETAILS Turning length: 1,000 mm Spindle speed: 3 – 2,500 rpm Machining diameter: 570 mm Max. swing diameter: 570 mm Max. turning diameter: 365 mm Max. workpiece length: 1,000 mm Number of cross slides: 1 Spindle bore: 62 mm Feed Z: 0 – 10,000 mm/min Feed X: 0 – 5,000 mm/min Tool holder: Tool post Nsdpewqgqkofx Adyokt Quill taper: Morse taper 5 MACHINE DETAILS Control: NUM 1062 Connected load: 35 kVA Supply voltage: 400 V Mains frequency: 50 Hz Total height: 1,800 mm Total weight: 4,000 kg Required installation length: 3,400 mm Required installation width: 1,900 mm EQUIPMENT - 3-jaw chuck - Various soft jaws - Tailstock

Leto izdelave: 1986, Stanje: pripravljen za uporabo (rabljen), Swing diameter over bed/cross slide: 360mm/160mm, centre distance: 800mm, travel X/Z: 205mm/810mm, spindle speed: 3,150 rpm, spindle bore: 60mm, tool stations: 8, rapid traverse X/Z: 10 m/min. Machine dimensions X/Y/Z: approx. 3,300mm/1,800mm/1,800mm, weight: approx. 3,300kg, control: Traub System TX-8. An on-site inspection is possible. Nsdpfx Adewmqx Doyekt

Leto izdelave: 2008, Stanje: pripravljen za uporabo (rabljen), Swing diameter over bed: 300 mm, max. workpiece length: 500 mm/600 mm, X-axis travel: 319 mm, feed rate X/Z: 3000 mm/min / 4000 mm/min, rapid traverse X/Z: 4000 mm/min / 5000 mm/min, spindle speed: 4000 rpm. Collet chuck: 5C 173E, spindle bore: 40 mm, tool stations: 4, tailstock quill travel: 110 mm. Machine dimensions X/Y/Z: approx. 2000 mm / 1450 mm / 1500 mm, weight: approx. 1200 kg, control: Fanuc Series 0i-TC. Includes 380V transformer, Fluidtec spray system, spare collets, and Multifix toolpost set. Documentation available. Inspection on site possible. Nedsu T Rifepfx Adyskt

Leto izdelave: 1997, Stanje: pripravljen za uporabo (rabljen), Centre height: 195 mm, centre distance: 1250 mm, turning diameter over bed/chuck/in bed gap: 400 mm/245 mm/585 mm, spindle bore: 54 mm, spindle speed: 2500 rpm, power: 7.5 kW, rapid traverse cross/longitudinal: 1.5 m/3 m/min, tailstock quill: MT5. Machine dimensions X/Y/Z: approx. 2600 mm/1500 mm/1600 mm, weight: approx. 1800 kg, control: GE Fanuc. Documentation available. On-site inspection possible. Nodpfjua E Txsx Adyekt

Leto izdelave: 1995, Stanje: pripravljen za uporabo (rabljen), A cycle-controlled CNC lathe by Boehringer is available. Swing diameter over bed/cross slide: 820mm/520mm, turning length: 1000mm, spindle bore: 128mm, tailstock quill diameter: 125mm, quill stroke: 280mm, max. workpiece weight: 5000kg. Machine dimensions X/Y/Z: approx. 3700mm/2400mm/2500mm, weight: approx. 6500kg, operating hours: 39,814h. An on-site inspection is possible. Nodpfswu E Ddox Adyjkt

Stanje: pripravljen za uporabo (rabljen), Swing diameter over bed/cross slide: 530mm/280mm, centre height: 264mm, centre distance: 2000mm, bed width: 370mm, spindle speed: 2000rpm, spindle bore: 80mm, tool shank dimensions X/Y: 25mm/25mm, cross slide travel: 300mm, quill diameter: 65mm, quill stroke: 180mm, repeat accuracy: mm. The machine has an electrical issue at the tool head. Documentation available. On-site inspection is possible. Njdpfx Adjv Amrteyokt