Ciklična Stružnica nakup rabljenega (3.101)

Stanje: dober (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 246, stružna dolžina: 900 mm, potovalna razdalja osi X: 280 mm, pomik po osi Z: 400 mm, skupna višina: 2.700 mm, skupna dolžina: 5.000 mm, skupna širina: 2.000 mm, skupna masa: 7.000 kg, proizvajalec krmilnikov: TRAUB, model krmilnika: SYSTEM TX 8H, število mest v zalogovniku orodij: 12, TRAUB TNA 400 CNC stružnica - Obratovalna napetost: 400 V - Frekvenca: 50 Hz Kwedpox Tzx Iefx Abbet - Priključek: 36 kW - Naznačen tok: 70 A - Vključno z konjičem, vpenjalnim tulecem HAINBUCH, transporterjem za ostružke, TOOL EYE ter dodatnim vpenjalnim tulecem proizvajalca FORKHARDT, premer: 250 mm Pozor: artikel mora biti obvezno prevzet med 18. in 26.02.2026 na še dogovorjen datum. FCA D-78087 Mönchweiler – naloženo na tovornjak

Stanje: dober (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: ML0177-000528, premer struženja: 230 mm, izvrtina vretena: 76 mm, največja hitrost vretena: 5.000 obr/min, skupna višina: 2.700 mm, skupna dolžina: 11.000 mm, skupna širina: 2.400 mm, skupna masa: 10.000 kg, nos vretena: A2#6, Premer palice (maks.): 65 mm, proizvajalec krmilnikov: FANUC, model krmilnika: SERIES 31 i-Model A, največji navor vretena: 208 Nm, Število orodnih postaj v orodni glavi 1: 12, Število orodnih postaj v orodnem revolverju 2: 12, DOOSAN PUMA TT 1800 SY CNC Turning Machine Kwodpfx Abjx Tzuijbot - Operating voltage: 200/220 V - Frequency: 50/60 Hz - Connection: 75.21 kVA - Rated current: 13 KA - Total connected load: 68.4 kVA - Max. distance between spindle noses: 980 mm - Saddle swing: 230 mm - Recommended turning diameter: 210 mm - Max. turning diameter on upper turret: 230 mm - Max. turning diameter on lower turret: 230 mm - Max. workpiece length (left and right spindle): 230 mm - Bar working diameter: 65 mm - Front spindle diameter: 110 mm - Boring bar diameter: 32 mm - Travel X1: 165 mm, X2: 190 mm - Travel Z1: 700 mm, Z2: 720 mm - Travel Y-axis: 100 (+-50) mm - Travel C1 and C2 axis: 36° (0.001°) - Rapid traverse X1 and X2 axes: 20 m/min - Rapid traverse Z1 and Z2 axes: 40 m/min - Rapid traverse Y-axis: 7.5 m/min - Rapid traverse B-axis: 40 m/min - Rapid traverse C1 and C2 axis: 600 rpm - Bed guideway width Z1 axis: 414 mm, Z2 axis: 339 mm - Bed guideway width X1 and X2 axes: 240 mm - Includes main and counter spindle each with HAINBUCH chuck, as well as tool holders as shown in the photos - Includes FMB Turbo 5-55 bar feeder and LNS chip conveyor, year of manufacture: 2013 Attention: The item must be collected on a fixed date between 18.02.2026 and 26.02.2026 (exact date to be agreed upon). FCA D-78087 Mönchweiler – loaded onto truck

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 2.129 mm, premer struženja: 550 mm, moč vretenovega motorja: 26 W, hitrost vretena (min.): 30 obr/min, največja hitrost vretena: 3.000 obr/min, izvrtina vretena: 90 mm, potovalna razdalja osi X: 362 mm, pomik po osi Z: 2.155 mm, hitro pomikanje X-os: 16 m/min, hitri pomik na osi Z: 18 m/min, vrsta vhodnega toka: trifazni, skupna višina: 2.305 mm, skupna dolžina: 5.550 mm, skupna širina: 2.300 mm, skupna masa: 9.800 kg, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, Rabljen stružnica DOOSAN z 2 osmi in CNC FANUC 21i-TB Ksdpfxex Sqwws Abbewt

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 1.275 mm, premer struženja: 481 mm, moč vretenovega motorja: 26 W, hitrost vretena (min.): 20 obr/min, največja hitrost vretena: 2.800 obr/min, izvrtina vretena: 102 mm, potovalna razdalja osi X: 260 mm, pomik po osi Z: 1.350 mm, hitro pomikanje X-os: 24 m/min, hitri pomik na osi Z: 30 m/min, vrsta vhodnega toka: trifazni, skupna višina: 2.110 mm, skupna dolžina: 4.636 mm, skupna širina: 2.035 mm, nos vretena: ASA 11, skupna masa: 6.900 kg, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, RABLJEN CNC stružnica z 2 osmi "DOOSAN model PUMA GT3100L" s CNC FANUC 0i-TF, vključno s transportnim trakom za odvod ostružkov in različnimi statičnimi nosilci orodij. Kjdpjx N R E Ajfx Abbswt

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 259 h, premer struženja nad prečnim suportom: 790 mm, stružna dolžina: 2.124 mm, premer struženja: 550 mm, izvrtina vretena: 102 mm, največja hitrost vretena: 3.000 obr/min, hitrost vretena (min.): 30 obr/min, potovalna razdalja osi X: 352 mm, pomik po osi Z: 2.155 mm, moč vretenovega motorja: 35 W, hitro pomikanje X-os: 16 m/min, hitri pomik na osi Z: 20 m/min, 2-axis CNC lathe "DNS mod. PUMA 4100LA" with DN Solutions-Fanuc i-Plus iHMI CNC Kedpfx Aoqrr Nwebbjwt

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 1.496 h, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 600 mm, stružna dolžina: 510 mm, premer struženja: 300 mm, izvrtina vretena: 51 mm, največja hitrost vretena: 6.000 obr/min, potovalna razdalja osi X: 205 mm, pomik po osi Z: 560 mm, moč vretenovega motorja: 15 W, hitro pomikanje X-os: 30 m/min, hitri pomik na osi Z: 36 m/min, vrsta vhodnega toka: Klimatska naprava, skupna masa: 3.600 kg, moč: 30 kW (40,79 KM), vhodna napetost: 400 V, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, 5-axis CNC lathe "DN Solutions model LYNX 2100LMSA" equipped with sub-spindle, live tooling, and FANUC i-PLUS iHMI CNC, complete with "TOP model FUSION" bar feeder. Kwjdpfx Abetq Aylebst

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 1.275 mm, premer struženja: 481 mm, izvrtina vretena: 102 mm, največja hitrost vretena: 2.800 obr/min, hitrost vretena (min.): 20 obr/min, potovalna razdalja osi X: 260 mm, pomik po osi Z: 1.350 mm, moč vretenovega motorja: 26 W, hitro pomikanje X-os: 24 m/min, hitri pomik na osi Z: 30 m/min, skupna višina: 1.907 mm, skupna dolžina: 5.300 mm, skupna širina: 2.105 mm, vrsta vhodnega toka: trifazni, skupna masa: 6.900 kg, nos vretena: ASA 11, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, Used 2-axis CNC lathe "DN Solutions model PUMA GT3100L" equipped with DN Solutions-Fanuc i-Plus iHMI CNC, including hinged belt chip conveyor, Morari self-centering steady rest with 15-170 mm opening, automatic doors, 12-position turret, automatic power-off, and tool life management system. Kodjwuti Uepfx Abbewt

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 900 mm, stružna dolžina: 2.001 mm, premer struženja: 650 mm, izvrtina vretena: 166 mm, največja hitrost vretena: 1.500 obr/min, hitrost vretena (min.): 15 obr/min, potovalna razdalja osi X: 362 mm, pomik po osi Z: 2.155 mm, moč vretenovega motorja: 45 W, hitro pomikanje X-os: 16 m/min, hitri pomik na osi Z: 18 m/min, skupna višina: 2.170 mm, skupna dolžina: 6.750 mm, skupna širina: 2.250 mm, skupna masa: 11.750 kg, prehod palice: 165 mm, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, 2-axis CNC lathe “DOOSAN model PUMA 480L” equipped with Fanuc 21i-TB CNC control, complete with "AUTOBLOK K5Z" steady rest. Kwodpfeu Ut Eljx Abbet

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 360 mm, izvrtina vretena: 105 mm, premer struženja: 500 mm, širina na sredini: 1.500 mm, največja hitrost vrtenja: 1.600 obr/min, New conventional lathe DLZ 560x2000 with extensive accessories. Technical Main Data: Max. turning diameter over bed: mm Ø500 Max. turning diameter over cross slide: mm Ø310 Max. swing diameter in gap: mm Ø720 Bed width: mm 405 Max. workpiece length (between centers): mm 1500 Max. turnable length: mm 1350 Effective gap length: mm 230 Spindle: Spindle nose: D8 Spindle bore: mm Ø80 Spindle taper: M.T. No. 7 / Metric Ø113 1:20 Spindle speed (steps): 12 steps Spindle speed range: rpm 36–1600 For further specifications, please refer to the attachment. Main Features: - Complete price including 2-axis position display (SINO – General importer in Germany), installed, and powerful 7.5 kW drive - Heavily ribbed machine bed absorbs vibrations, even during roughing operations - Very wide guideways, induction-hardened and ground, for long service life with high accuracy. Max. workpiece weight up to 500 kg. - Electrically interlocked chuck guard - Equipped with adjustable micrometer stop and overload clutch - Hardened and ground gears with oil-circulating lubrication system for powerful and quiet spindle drive Kwjdpfx Asyak Evsbbjt - Precision main spindle bearings ensure high concentricity and accuracy - Clearly arranged and ergonomically designed controls - Single-lever feed selection for cross, longitudinal, and rapid feed (X/Z-axis) on the carriage - Precise gear stage selection for spindle speed and feed rates - Fine-graduated selection for feed rates and thread pitches - Main spindle gearbox with electromagnetic clutch - Key electrical components from top European brands, e.g. Telemechanique - Extensive standard equipment including Multifix toolholder, chuck, faceplate, 3-axis digital readout, steady rests, and much more - All machines are tested by our service technicians before delivery Further models (including ones with cycle control) available on request. Contact us now and discover the world of innovative turning technology! Our service for you: • Consultation and solution finding at your location • Organization of transport of your machine to your factory • Installation, assembly, commissioning, and handover ready for operation • Financing and review of funding opportunities through KFW, BAFA, and more.

Stanje: dober (rabljeno), VICTOR VTURN-46 CNC TEŽKI NAKLONJENI STRUŽNIK S KRMILJENJEM FANUC SERIES O-T. 4-čeljustno vpenjalo Ø505mm. Največji premer struženja Ø730mm. Standardni premer struženja Ø520mm. Razdalja med konicama 1.750mm. Pomiki osi 'X'=365mm, 'Z'=1.650mm. Hitri pomik 'X'=15m/min, 'Z'=12m/min. Hitrost vretena 1.500 obr./min (30kW motor). Revolverska glava z 10 postajami. Serijska št. MB-1193. OPIS: S hladilnim sistemom, transportnim trakom za odrezke, filtrirno napravo Filtermist F21/8, roko za nastavljanje orodja, hidravličnim 3-čeljustnim vpenjalom Ø445mm, konjičkom, 2 podpornikoma, nožnimi stikali, signalnim stolpom, veliko čeljusti, orodnimi bloki in tulec za izvrtalna orodja. Skupne mere D6.200 x Š2.500 x V2.500mm. Teža 12.800kg. Kedpfxox Naqno Abbewt

Stanje: rabljeno, Opis značilnosti Vrsta stroja: CNC stružnica (horizontalna, kompaktna, po potrebi za avtomatizirano proizvodnjo) Obdelovalne osi: X in Z os (klasična za CNC struženje) Premer vrtenja nad posteljo: približno 300–400 mm Krmilje: OKUMA – OSP 500 L-G Kwsdpfxjwm Rrdj Abbet Največja dolžina obdelovanca: približno 500 mm (odvisno od modela) Hitrost vretena: do 3500 min⁻¹ Revolver za orodja: 8- ali 12-pozicijski, ročno ali samodejno indeksiran Premer vretenaste izvrtine: približno 45–50 mm Sistem za hlajenje: integriran Vse informacije so brez garancije. Vse navedbe so neobvezujoče in služijo zgolj kot orientacija. Podrobne informacije so na voljo na zahtevo.

Stanje: rabljeno, Swing diameter: 530 mm Turning length: 500 mm Control system: OSP 700 L-G Kwsdpfx Abewugr Aebot Feature Description Machine type: CNC lathe with milling unit (C-axis + live tooling) Machining axes: X, Z, and C axes (C for rotating the workpiece) Tool turret: 8–12 stations, with driven tools Control: OSP 700 L-G Swing diameter over bed: 530 mm Swing diameter over saddle: 530 mm Swing diameter over cross slide: 340 mm Distance between centers: 500 mm Spindle speed: approx. 50 – 3500 rpm Live tools: For drilling, milling, and thread cutting on the workpiece circumference C-axis: Enables angular positioning (e.g., peripheral milling) Spindle bore: approx. 50 mm Machine weight: approx. 5,080 kg All information without guarantee. These details are for guidance only. Further information available on request.

Stanje: rabljeno, Swing diameter / mm Turning length / mm Swing diameter over cross slide / mm Technical Data – Model 230 DIMENSIONS Centre height over bed: 230 mm Distance between centers: 1000-1500 mm 2000-2500 mm 3000 mm Bed width: 360 mm Max. turning diameter: over bed: 465 mm over cross slide: 278 mm over fixed steady rest: 200 mm over travelling steady rest: 160 mm SWING OVER GAP Gap width: 300 mm Distance between faceplate edge and gap: 150 mm Max. turning diameter in gap: 690 mm SPINDLE Front bearing diameter (internal): 110 mm Rear bearing diameter (internal): 95 mm Spindle bore diameter: 77 mm Mounting type - Cam Lock: 6" Spindle taper (internal) – taper: 1 : 20 Spindle nose taper – Morse: 5 Spindle speed ranges: Low – rpm: 15÷1000 Standard – rpm: 22÷1500 Ksdpowz Rywsfx Abbewt High – rpm: 30÷2000 FEEDS (without gear change)-No.: 108 Longitudinal feed range per rev.: 0.04÷4 mm Cross feed range per rev.: 0.02÷2 mm Leadscrew diameter: 40 mm Leadscrew pitch: 12 mm THREADS (without gear change) Metric – No. 54 from: 0.5÷28 mm Module – No. 54 module: 0.25÷14 Whitworth – No. 54 tpi x 1": 56÷1 Diametral Pitch – No. 54 D.P.: 112÷2 Inch (imperial) – No. 54 from: 1/32 ÷ 13 3/4" TAILSTOCK Quill diameter: 75 mm Quill stroke: 220 mm Quill taper – Morse No.: 5 POWER Main motor – HP: 10 Pump motor – HP: 0.25 WEIGHT approx. 2920kg

Stanje: dober (rabljeno), Kód: 0242 Znamka: MVM - ITALIJA Model: T 1500 - CE standard Profesionalni stružnica za les s kopirno napravo za les, mavec, kompozitne materiale in različne druge materiale – CE standard Tehnični podatki: Enofazni motor 220 V – 2,5 kW Kjdpfx Asxykwkebbewt Kopirna naprava: Kopirna naprava je enota, nameščena na zadnji strani postelje stroja. Omogoča reprodukcijo oblik s pomočjo lesenih vzorcev ali kovinskih šablon zaradi moderne izvedbe. Je praktično in enostavno vodljivo orodje, ki omogoča veliko prihranek časa tudi pri serijski ali masovni proizvodnji. Pomik se izvaja z udobnim obračanjem kolesa, ki se nahaja na sprednji strani stroja. Razdalja med konicama: 1500 mm Višina konice: 220 mm Orodni nosilec Število obratov vretena: 4 hitrosti Stožec vretena št. 2 Kontra konica št. 3 Skupne dimenzije (dxšxv): 2350 x 650 x 1200 mm Teža: 325 kg

Stanje: novo, Leto izdelave: 2025, CONDOR VC plus The new standard in conventional precision lathes. A high-quality, powerful, and energy-efficient precision lathe designed for high productivity in production and toolmaking, as well as in training and education environments. Premium quality, energy efficiency, precision, and universal application in production, training, and continuous education. It stands out thanks to: - Future-oriented technology - Maximum accuracy - Long service life - User-friendly ergonomics - Minimal footprint - Extensive range of accessories The consistent and innovative further development of the proven Condor series offers an economical and intelligent solution for your daily operations. Technical Data: WORKING RANGE Center height: 180 mm Swing diameter over bed: 360 mm Swing diameter over cross slide: 190 mm Distance between centers: 800 mm SPINDLE Spindle nose DIN 55027 / DIN ISO 702-3: Size 6 Spindle bore: 57 mm Spindle front bearing diameter: 90 mm MAIN DRIVE Power rating 60%/100% duty cycle: – / 10.5 kW Spindle speed range: 25 – 4,000 rpm Number of speeds: stepless FEED RANGE Number of feeds: stepless Longitudinal: 0.01 – 6 mm/rev Cross: 0.003 – 2 mm/rev THREADING RANGE Kwedpfx Aoqwipnjbbot Metric threads: 0.1 – 20 mm TAILSTOCK Quill diameter: 50 mm Quill stroke: 110 mm Internal taper DIN 228: MK 3 ACCEPTANCE ACCURACY: DIN 8605 Equipped with WEILER screen display WTS 15 VC plus - Large, clear 15" touchscreen, rotatable and tiltable, resolution 1366 x 768 - Menu navigation via swipe gestures - Operating functions accessible via app manager - Operator panels freely configurable, placeable, and scalable - Drawings/sketches import from PDF files via USB interface, individually zoomable - Video-supported machine maintenance - Context-sensitive help menu (replaces WEILER VC plus screen display) The machine is located at our showroom in 71334 Waiblingen-Beinstein and is available immediately. For detailed equipment information, please contact us.

Stanje: novo, Praktikant VC plus The new standard in conventional precision lathes. High-quality, energy-efficient, precise, and universally deployable for production, training, and further education. This machine stands out with: forward-looking technology maximum precision durability operator-friendly ergonomics Kedpfx Aohw N Ntobbowt minimal footprint and a wide range of accessories. The consistent and innovative further development of the proven Praktikant series offers an economical and intelligent solution for your daily applications. Technical Data: WORK AREA Center height: 160 mm Swing diameter over bed: 320 mm Swing diameter over cross slide: 190 mm Distance between centers: 650 mm SPINDLE Spindle nose DIN 55027/DIN ISO 702-3: Size 5 Spindle bore: 43 mm Front bearing diameter: 70 mm MAIN DRIVE Drive power 60%/100% duty cycle: – / 8 kW Speed range: 25 – 5,000 rpm Number of speeds: stepless FEED RANGE Number: stepless Longitudinal: 0.01 – 6 mm/rev Cross: 0.003 – 2 mm/rev THREAD CUTTING RANGE Metric threads: 0.1 – 20 mm TAILSTOCK Quill diameter: 40 mm Quill travel: 85 mm Internal taper DIN 228: MK 3 ACCEPTANCE ACCURACY: DIN 8605 Equipped with WEILER display WTS 15 VC plus - Large, clear 15" touchscreen, rotatable and swiveling, 1366 x 768 resolution - Change control screens via swipe gestures - All functions accessible via app manager - Control panels can be configured, placed, and scaled freely - Import drawings / sketches from PDF via USB interface, individually zoomable - Video-assisted machine maintenance - Context help menu (instead of WEILER VC plus display) - Coolant system 18 liters incl. coolant pump The machine is available for immediate delivery and can be inspected in our showroom in 71334 Waiblingen-Beinstein. For details on equipment, please contact us.

Stanje: dober (rabljeno), Used lead and feed screw lathe COLCHESTER MASTER 3250 Kwsdpfx Abouqkf Njbjt Centre height: 170 mm Centre distance: 650 mm Spindle bore: 42 mm Infinitely variable speed: 15–3250 rpm 1 x SCHUNK wedge bar power chuck Ø160mm 1 x MULTIFIX toolholder size B with 4 inserts Machine lamp, chuck guard with electrical interlock Machine mounting feet 1 x live centre 1 x live centre with pressure gauge 1 x drill chuck with morse taper The machine is located with us in 71334 Waiblingen-Beinstein and is immediately available. Inspection of the machine can be arranged by appointment.

Stanje: novo, Leto izdelave: 2025, Praktikant GSD One of the best-selling and most popular conventional precision lathes stands out due to: advanced engineering highest precision durability ergonomics proven in daily practice Kwedpfx Abswhzcpebst minimal space requirements and a wide range of accessories. Proven for decades in single-part and small-batch production, across trade and industry, for training and further education, and in tool and fixture construction. Centre distance: 650 mm Centre height: 160 mm Automatic handwheel disengagement Leadscrew and feed shaft cover Main spindle brake Toolroom accuracy according to DIN 8605 Pole-changeable brake motor Headstock gearbox 16 fixed spindle speed steps Digital position readout (optional) LED machine light TECHNICAL DATA: WORKING AREA Centre height 160 mm Swing over bed 320 mm Swing over cross slide 190 mm Centre distance 650 mm SPINDLE Spindle nose DIN 55027/DIN ISO 702-3 Size 5 Spindle bore 43 mm Spindle diameter at front bearing 70 mm MAIN DRIVE Drive power 60%/100% duty cycle 2.6 / 3.1 kW Speed range 48 – 2,500 rpm Number of speeds 16 FEED RANGE Number 24 Longitudinal 0.02 – 0.63 mm/rev Cross 0.006 – 0.2 mm/rev THREAD CUTTING RANGE Metric threads 0.25 – 8* mm TAILSTOCK Quill diameter 40 mm Quill stroke 85 mm Internal taper DIN 228 MK 3 TEST ACCURACY DIN 8605 * Whitworth threads and metric thread pitches 0.45; 0.75; 4.5 and 5.5 are only possible using additional change gears. The machine is located at our showroom in 71334 Waiblingen-Beinstein and is available immediately. For details on equipment and configuration, please contact us.

Stanje: rabljeno, Leto izdelave: 2000, Použitý soustruh CONDOR AC, čiastočne repasovaný Výška hrotu: 165 mm Vzdialenosť medzi hrotmi: 750 mm Priemer vretienového otvoru: 40 mm Otáčky vretena: 22–2 800 ot./min plynule nastaviteľné - Rýchloupínací držiak Multifix, veľkosť B - Digitálny odmeriavací systém WEILER DZ-V - Priechodný doraz vretena Kwedpfx Ajx E Um Njbbst - Pevná luneta - 7 kusov Multifix držiakov - Plochý ochranný kryt proti rozstrekovaniu - Elektricky istený kryt skľučovadla - Prevodové kolesá a rôzne upínacie čeľuste Stroj je čiastočne repasovaný: - Lôžkový suport: Vodiace dráhy nanovo potiahnuté a zaškrabané, klinové lišty a upínacie lišty prispôsobené - Priečny suport na ložiskovom suportoch zmeraný a nastavený. Priečny suport s rybinovým vedením novo zaškrabaný, kliny prispôsobené a zaškrabané - Horný suport novo zaškrabaný, klinová lišta prispôsobená - Všetky odmeriavacie pravítka repasované, káble vymenené Stroj sa nachádza v našom showroome v 71334 Waiblingen-Beinstein a je ihneď k dispozícii. Ohľadom vybavenia nás prosím kontaktujte.

Stanje: rabljeno, Leto izdelave: 2003, številka stroja/vozila: 1527, rabljeni vodilno-vlečni stružnica COLCHESTER Triumph VS 2500 Višina konic: 195 mm Medosna razdalja: 650 mm Vretenska odprtina: 54 mm Neomejeno nastavljiva hitrost od 14 do 2500 obr/min Pinola konjička MK5, hladilna naprava, hitra naprava za rezanje navojev Digitalni prikaz FAGOR NUP 300 TS-RS. Kwjdsx Hrumspfx Abbet 1 x RÖHM trije-čeljustni vpenjalnik, 5-pozicijski bobenski omejevalnik, vzdolžni omejevalnik vretena, Strojna luč, 1 x PARAT 4-pozicijska revolverska glava, 4 x PARAT izmenjljivih nosilcev, soječ konjiček in hitro-vpenjalna vrtalna glava. Stroj je pri nas v 71334 Waiblingen-Beinstein in je takoj na voljo. Ogled stroja je mogoč po dogovoru.

Stanje: rabljeno, številka stroja/vozila: 11756, Used lead and feed screw lathe WEILER LZ 280 Centre height: 125 mm Centre distance: 800 mm Spindle speeds approx. 26–2000 rpm Includes: - 1 x three-jaw chuck Ø 125 mm with both internal and external jaws, brand new - Multifix size A with 2 tool holders - Emergency stop / switch unit, rear chip guard - All change gears available, driver plate Kwodpovd Dbnofx Abbet - Tray, machine lamp, new power socket - 15 collets from Ø 3.5 to 18.5 mm, collet clamping tube - Fixed centre and MK 2 sleeve for clamping tube - Bed stop, chuck guard, various turning tools and operating manual Machine is located at our premises in 71334 Waiblingen-Beinstein and is immediately available. Inspection of the machine is possible by appointment.

Stanje: rabljeno, številka stroja/vozila: 1717, used lead and feed screw lathe WEILER PRAKTIKANT Kwedjuqb Emepfx Abbst Centre height: 140 mm Centre distance: 500 mm Spindle bore: 36 mm Spindle speeds: 42–2,000 rpm Equipped with RSF 3-axis digital readout, 1 piece 3-jaw chuck Ø160 mm, Chuck guard with electrical interlock, Multifix tool post size A with 3 holders Lever-operated collet chuck system with 15 collets. The machine is located at our site in 71334 Waiblingen-Beinstein and is available immediately. Viewing by appointment is possible.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 36 mm, višina središča: 155 mm, stružna dolžina: 800 mm, največja hitrost vretena: 2.000 obr/min, hitrost vretena (min.): 25 obr/min, used centre lathe Weiler Condor, No. 7939, Centre height: 155 mm Centre distance: 800 mm Spindle speeds: 12–2800 rpm Spindle bore: 36 mm Accessories: Kwodev R Tdxepfx Abbot 1x 3-jaw chuck RÖHM, Ø 160 mm, Multifix base unit size B with 2 inserts, keyless drill chuck, live centre, and coolant system. The machine is located in our warehouse in 71334 Waiblingen-Beinstein and is available immediately.

Stanje: dober (rabljeno), Leto izdelave: 2002, stružna dolžina: 200 mm, premer struženja: 300 mm, izvrtina vretena: 40 mm, največja hitrost vretena: 4.000 obr/min, skupna masa: 6.000 kg, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, CNC stružnica Okuma LVT300M, prikazana na sliki, je naprodaj. Stroj je trenutno v proizvodnji! Pogonsko orodje, stroj z osjo C. Možen ogled med delovanjem. Glavni parametri: -Krmilje: OSP100 -Hidravlična glava -Hidravlični sani -Največji premer struženja: 300 mm -Največja dolžina: 200 mm -Premer vretena: 40 mm Kwedpfjx Uzyusx Abbot -Revolver: 12 pozicij

Stanje: rabljeno, CNC stružnica Mazak QTN100IIMY, letnik 2007, v zelo dobrem stanju Os Y Os C Konjiček Kwjdpjx Hhkksfx Abbjt