Ciklična stružnica

DMTG - Dalian CKE 6166 Z / 1500

Stanje: rabljeno, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 1.500 mm, pomik po osi Z: 1.500 mm, največja hitrost vretena: 6.000 obr/min, RepairFIT by Dornhöfer The Difference. Including installation & commissioning! TECHNICAL KEY DATA Year of manufacture: 2020 Travel/capacities: Longitudinal (X): 3,000 mm Vertical (Y): 1,500 mm Cross (Z): 1,500 mm Clamping surface NC rotary table: Rotary indexing table: 2,400 x 1,900 mm Max. transport load (with centrally supported load): 10,000 kg Positioning accuracy arc/sec: ± 2.5" Max. swing diameter: approx. 2,900 mm Paintwork: RAL 7024 graphite grey RAL 7038 agate grey Tool holder: DIN 69871 AD (ISO50) Big Plus Pull stud: DIN 69872 Form A Main spindle drive: Motor/brand main spindle drive Heidenhain Max. drive power: 32 kW from 376 rpm Max. torque: 1,085 Nm (constant up to 376 rpm) Speed control/gearbox: 3-stage (oil-cooled) with automatic shifting Spindle speeds 6,000 rpm: low range rpm 0-738 mid range rpm 739-1,842 high range rpm 1,843-6,000 Axis drives/axis feed rates: Fpodjygiwqjpfx Abved Axis drive motors: brand Heidenhain (digital drives) Rapid traverse max.: X, Y, and Z axis 25,000 mm/min Feed rate max.: X, Y, and Z axis 15,000 mm/min Max. average acceleration: 2 m/s² Max. feed force: X, Y, and Z axis 26,000 N Linear axis drive systems: X-axis (longitudinal): preloaded ball screw Ø 63 x 40 Z-axis (vertical): preloaded ball screw Ø 63 x 20 Y-axis (cross): preloaded ball screw Ø 50 x 20 Guide system: X-axis (longitudinal) 6 pcs. type INA RUE 55 EL Z-axis (vertical) 4 pcs. type INA RUE 65 EL Y-axis (cross): 8 pcs. type INE RUE 55 E-HL and additional damping unit Clamping table / table surface: T-slot size 10x: 22 H 12 mm Reference slot center 1x: 22 H 8 mm T-slot spacing: 150 mm (pitch spacing outer slots 1,800 mm) Weight: Weight RT3000: approx. 32,000 kg Connected load: approx. 53 KVA Heidenhain TNC 640HSCI Automatic tool changer with 80 positions Automatic oil-cooled milling head 2.5° x 1° 2 chip conveyors Coolant system with boost to 37 bar IKZ Special operating mode 4 RepairFIT is our proven offer for a profitable entry into our product lines. Machines offered in this line are sourced by us following a strict selection process and subjected to a thorough inspection (deep-dive check). After intensive cleaning, any identified obvious defects and faults are professionally rectified by our expert service team.

Stanje: dober (rabljeno), Leto izdelave: 2008, stružna dolžina: 2.000 mm, hitrost pomika os X: 3.000 m/min, hitrost podajanja os Z: 3.000 m/min, HeidenHain ND780 3-osni sistem za merjenje hitrosti vretena Variomatic razpon obratov Luneta Multifix sistem za vpenjanje orodja Dolžina struženja: 2000 mm Premer struženja nad ležiščem Ø: 830 mm Fpodpfx Aoxf Ey Robvjd Premer struženja nad suportom: 420 mm Premer struženja nad izrekom Ø: 1000 mm Dolžina izreka: 295 mm Premer vretenine: 110 mm Širina ležišča: 560 mm Pinola: Ø 105 mm Hod pinole: 225 mm Vpenjalna glava vretena: 6Mk Moč: 15 kW Obrati: 2000 obr/min Pomik X-os: 3000 mm/min Pomik Z-os: 3000 mm/min Teža obdelovanca: 2400 kg Dolžina: 3700 mm Širina: 1900 mm Višina: 1900 mm Teža: 5500 kg Prosimo, upoštevajte: Informacije na tej strani so bile sestavljene po naših najboljših močeh in, kadar je bilo mogoče, pridobljene od proizvajalca. Podatki so predstavljeni v dobri veri, vendar točnosti ni mogoče zagotoviti. Zato ne predstavljajo pravne zastopanosti ali pogodbenih pogojev. Priporočamo, da vse bistvene podatke preverite sami.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1991, potovalna razdalja osi X: 1.500 mm, pomik osi Y: 700 mm, pomik po osi Z: 550 mm, največja hitrost vretena: 2.066 obr/min, skupna masa: 4.000 kg, 3-axis Heidenhain digital readout feed drive controller Fpsdpowqcv Nsfx Abvod automatic lubrication external electrical cabinet table size: 2000 x 460 mm travels: 1500 x 700 x 550 mm weight: 4000 kg

Stanje: pripravljen za uporabo (rabljen), skupna dolžina: 900 mm, skupna širina: 400 mm, skupna višina: 1.100 mm, lastna masa: 140 kg, plinska cev: Ø50 x 3,91 mm jeklena cev: Ø60 x 3 mm Fodpfoxllirex Abvjpd nerjaveča cev: Ø60 x 2 mm bakrena/aluminijasta cev: Ø64 x 4 mm polna palica: Ø35 mm pravokotna polna palica: 60 x 10 mm ravna palica (trda): 60 x 16 mm ravna palica (lahka): 60 x 30 mm škatlasti profil: 60 x 30 x 4 mm največji radij: 200 mm hitrost krivljenja: 1,25 - 2,5 obr/min video kliknite tukaj Moč motorja: 1,5 kW

Stanje: dober (rabljeno), WEBER pipe extrusion line including: WEBER DS 8.5 Fodpfx Abjvryhyovjpd Elmepla saw Battenfeld R200/6 Battenfeld V125

Stanje: rabljeno, Pressure: 75 t Stroke: 250 mm Clearance between uprights (length/side): 800 x 215 mm Installation height: 170 - 885 mm Operating pressure: 7.5 - 8.5 bar Machine weight: approx. 0.45 t Dimensions (L x W x H): 1.2 x 0.8 x 2.1 m Hydraulic/pneumatic workshop press Fedpfx Aoupxr Usbvjpd Cylinder can be shifted laterally Pneumatic foot pedal Winch for table height adjustment 2 press blocks CE marking

Stanje: zelo dobro (rabljeno), Knuth UFM 2 univerzalna rezkalna naprava Tehnične specifikacije Potovalna razdalja X-os (ročno) 800 mm Potovalna razdalja X-os 750 mm Potovalna razdalja Y-os 300 mm Potovalna razdalja Z-os 400 mm Velikost mize 1320x320 mm T-utori 5x14x63 mm Podajalne hitrosti Podajalna razdalja Y-os (8) 20 - 360 mm/min Podajalna razdalja Z-os 600 mm/min Hitrost vretena (12) 58 - 1800 min-1 Stožec navpičnega vretena SK 40 Razdalja med konico vretena in mizo 0 - 400 mm Zasuk glave 45° Stožec vodoravnega vretena SK 50 Pogon Fedpfxsnfu Rie Abvjpd Glavna moč motorja 4 kW Moč motorja na osi Z 0,75 kW Moč napajalnega motorja 0,55 kW Moč motorja hladilne črpalke 0,09 kW Zmogljivost hladilne črpalke 25 l/min Dimenzije in teža Dimenzije 1900x1720x1750 mm Teža 2100 kg Financiranje preko naše banke je prav tako mogoče. komplett-konzept.leasingo.de Druge nove in rabljene artikle najdete v naši spletni trgovini! Mednarodni stroški poštnine na zahtevo!

Stanje: novo, The NEOMIG-i 500 G is a three-phase multiprocess welding machine with a separate wire feeder. Its advanced digital technology and duty cycle ensure excellent arc characteristics for industrial MIG/MAG applications. Integrated synergic functions facilitate setup and reduce spatter during welding. Equipped with the WF wire feeder, it offers precise welding parameter control to guarantee perfect quality. Fpjdpfsmxkdpex Abvsd MULTI-PROCESS MIG/MAG: - Steel and stainless steel wire: Ø from 0.6 to 1.6 mm - Aluminium wire: Ø from 0.8 to 1.6 mm - CuSi and CuAl wire: Ø from 0.8 to 1.6 mm - Flux-cored wire (reverse polarity): Ø from 0.9 to 2.4 mm MMA DC / Pulsed: basic, rutile, and cellulose electrodes. TIG DC Lift / Pulsed. Gouging.

Stanje: novo, TC 165 x 750V Image shows MIOTAL® TC 180 x 1000 Fpedoir Igwspfx Abvod Centre distance: 750 mm Centre height: 165 mm Swing over bed: Ø 330 mm Bed width: 190 mm Cross slide travel: 160 mm Top slide travel: 90 mm Spindle mount: DIN 55029 (Camlock) D1-4 Spindle bore: Ø 40 mm Max. chuck diameter: Ø 200 mm Spindle speed, stepless: 30 - 2,000 rpm Mechanical gearbox stages: 3 Motor power: 2.2 kW Longitudinal feed Z: (40) 0.044 - 1.96 mm/rev Cross feed X: (40) 0.022 - 0.98 mm/rev Metric threads: (32) 0.4 - 7.0 mm Inch threads: (32) 4 - 56 TPI Module threads: (32) 0.4 - 7.0 Diametral threads: (32) 7.5 - 112 Tailstock quill diameter: Ø 40 mm Tailstock quill taper: MT 3 Quill stroke: 100 mm Lateral offset: ± 10 mm Weight, approx.: 650 kg Features: - Inspection certificate to DIN standards - Precise, hardened and ground guideways - Robust headstock with oil circulation lubrication, precision spindle bearings, gears hardened and ground for long-lasting quality - Electromagnetic spindle brake (TC), frequency inverter with electric braking system (V models) - Torsion-resistant Meehanite cast iron beds, stress-relieved and extensively ribbed for maximum smoothness - Electrical equipment by SIEMENS/SCHNEIDER - Overload protection for feed gearbox - Pulse pushbutton for main spindle - CE / IEC as well as German documentation and German service Standard equipment (included accessories): - Machine stand with splash guard back panel - 3-jaw chuck - 4-way toolpost - Foot pedal with mechanical brake - Coolant system - Chuck guard and spindle guard in compliance with European CE safety standards - 1 fixed centre for main spindle - 1 fixed centre MT3 - 1 test report - Safety guards and electrical equipment according to CE - Reducing sleeve for main spindle operating tool Available options for this lathe: - 3-axis digital display - Multifix quick-change toolpost system Also available as a geared head variant.

Stanje: dober (rabljeno), Leto izdelave: 1979, Model building milling machine, universal model milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine, model making mill -Manufacturer: Zimmermann, Universal Milling Machine Type FZ 1 with extensive accessories -Rotatable cross table: 490 x 400 mm -Traverse paths: X/Y/Z 320/385/430 mm -Spindle taper: SK30 Fsdpfxjnzpx Rs Abvspd -Drive power: 1.1 kW -Speeds: 560 to 14,000 rpm, 8 steps -Accessories: included, see photos -Dimensions: 1000/680/H1970 mm -Weight: 477 kg