Vodni-/vlečni vretenasti stružnica, premer struženja nad posteljo 400–499 mm nakup rabljenega (214)

Stanje: dober (rabljeno), Well-maintained TOS TRENCIN SUI40-50 lathe Centre distance: 1,500 mm Swing over bed: 500 mm Swing over cross slide: 320 mm Spindle speed: 14 to 2,240 rpm The machine is operational and in good condition. Ljdpjrwd Hzsfx Ah Dohn

Stanje: dober (rabljeno), premer struženja nad prečnim suportom: 267 mm, premer struženja: 432 mm, širina na sredini: 1.500 mm, 3-jaw chuck diameter 250 mm Steel tool post Lodpfx Aetq Exrsh Djhn Steady rest Tailstock Coolant system Technical data: Center distance: 1500 mm Turning diameter over bed: 432 mm Turning diameter over cross slide: 267 mm Turning diameter in the gap: 710 mm Spindle bore: 76 mm Spindle speed range: 20–1600 rpm Drive power: 9.3 kW Machine weight approx.: 2310 kg Technical data, accessories, and description of the machine are non-binding.

Stanje: dober (rabljeno), Leto izdelave: 1997, Rabljeni stružnica TOS Lhjdpfjxphxqsx Ah Djn Tip: SN 40 C 1000 Premer obdelave: 400 mm Dolžina obdelave: 1000 mm 2-osno digitalno odčitavanje 3-čeljustna glava

Stanje: novo, TC 205 x 1000 CVS Exhibition machine, color blue Technical Data: Swing over bed: 410 mm Centre height: 205 mm Swing over cross slide: 234 mm Swing in gap: 610 mm Bed width: 280 mm Between centers: 1000 mm Number of spindle speeds: 8 Speed range: 80 - 2000 rpm Spindle bore: 58 mm Spindle nose: D1-6 Camlock Spindle taper: MT 6 Tailstock quill travel: 130 mm Tailstock taper: MT 4 Max. tool size: 22 mm Lsdpfx Ahsvzmtze Dehn Cross slide travel: 225 mm Top slide travel: 130 mm Thread cutting imperial: 2 - 72 T.P.I Thread cutting metric: 0.2 - 14 mm Thread D.P.: 4 - 44 D.P. Thread module: 0.3 - 7 MOD Longitudinal feed: (24) 0.035 - 0.5 mm/rev metric (24) 0.0014 - 0.020 inch Cross feed: (24) 0.017 - 0.250 mm/rev metric (24) 0.0007 - 0.0100 inch Main motor power: 3.75 kW Coolant pump: 0.10 kW Weight, approx.: 1650 kg Equipment: - CSS for constant cutting speed - Flange - Fixed steady rest - Splashguard rear panel - 4-way tool post - Foot brake - Emergency stop switch - Coolant system - Chip tray - Fixed centre - Change gear set - Reducing bush for main spindle - Machine pads - Service tools - Operating manual

Stanje: pripravljen za uporabo (rabljen), Stružnica, stružnica CA6140, rabljeni stroj Skupne dimenzije: 2700 × 1140 × 1750 mm Nazivna moč: 7,5 kW Obrat nad posteljo: 400 mm Obrat nad vozičkom: 210 mm Razdalja med konicama: 1000 mm Hitrost vretena: 16–1400 min⁻¹ (24 stopenj) Širina postelje: 400 mm Lhjdpfoxacx Hex Ah Djn Velikost držala orodja: 25 × 25 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1977, Takoj na voljo iz stečaja: Stružnica L & Z Stanko Tip 16 K 20 Leto izdelave 1977 Prenova in digitalni prikaz leta 2012 Višina konic 200 mm Premer nad posteljo 400 mm Premer nad suportom 220 mm Vretensko izvrtino 55 mm Vrtljaji vretena 12,5 – 1600 min⁻¹ Pogon 7,5 kW Vpenjalna glava Repni zalomet Hladilna naprava Multifix držalo za orodje z vložki Digitalni prikaz Luneta Lhedpfxjxqbhne Ah Dsn Teža 2700 kg Cena: 2.500 € + DDV, iz skladišča

Stanje: dober (rabljeno), Leto izdelave: 2007, Description Leadscrew and feed shaft lathe OPTIMUM D320 x 920 SG Centre height: 160 mm Centre distance: 920 mm Spindle speed: 65 – 1800 rpm, 18 steps Swing over support: 178 mm Swing over bed gap removed: 430 mm Turning length in bed gap: 115 mm Spindle taper: MT 5 Spindle mount: Camlock ASA D1-4 Ljdpfjw A Rczjx Ah Dehn Spindle bore: 38 mm Top slide travel: 85 mm Cross slide travel: 165 mm Tailstock taper: MT 3 Tailstock quill stroke: 110 mm Longitudinal feed (32): 0

Stanje: zelo dobro (rabljeno), Konvencionalni stružnica Inv. št.: 3506 Ayel-Tech Tip BT 400 * Dolžina struženja: 1000 mm * Premer struženja: 400 mm * Vretenina izvrtina: 52 mm !!! * Hitrost vretena: 70 - 2000 obr./min * 3-osni digitalni prikaz SINO * Nožna zavora * Hladilna naprava * Strojna svetilka * Zaščitni pokrov * Fiksna luneta * Sledi luneta * Trizelčne glave * Štirizelčne glave * Nujna ustavitev Lodpfjxp Idgsx Ah Djhn * Menjalna kolesa * Zadnja stena za ostružke * Dokumentacija * 400V

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, premer struženja nad prečnim suportom: 420 mm, izvrtina vretena: 106 mm, premer struženja nad ležiščem sani: 650 mm, premer struženja nad zgornjim sanežem: 420 mm, stružna dolžina: 2.000 mm, hitrost pomika os X: 5 m/min, hitrost podajanja os Z: 10 m/min, skupna dolžina: 1.900 mm, skupna širina: 2.100 mm, skupna višina: 1.900 mm, največja hitrost vretena: 2.000 obr/min, hitrost vretena (min.): 1 obr/min, skupna masa: 5.100 kg, premer trikrake glave: 650 mm, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, DMT stružnica KERN CD650 je primerna za precizna dela in težko obdelavo. Idealna za izdelavo posameznih kosov in maloserijsko proizvodnjo. Dodatne informacije: Teža: 5.100 kg Mere: Stroj: 1,9 m + končna dolžina x 2,1 m x 1,9 m (D x Š x V) Električna omara: 1,2 x 0,5 x 1,6 m (D x Š x V) Oprema in opcije: C-os s cikli vrtanja, rezkanja in graviranja ter možnostjo prostega ICP vnosa Ethernet in USB priključek za povezavo v mrežo Transportni trak za odrezke Originalna dokumentacija Lhjdpjw A Iu Iofx Ah Don Fiksna in gibljiva luneta Samo-centrirna 3-čeljustna vpenjalna glava Ø400 mm Bdoc Rx Trsw A Iu Iofvsg Neodvisna 4-čeljustna vpenjalna glava Ø600 mm Vpenjalna/prijemalna plošča Ø650 mm Razne notranje/zunanje čeljusti Fiksne in gibljive konice Približno 30 večnamenskih držal tipa C Vrtalna glava z MK5 vpetjem

Stanje: novo, TC 180 x 1000 V Centre distance: 1000 mm Centre height: 178 mm Swing over bed: Ø 356 mm Bed width: 190 mm Cross slide travel: 160 mm Top slide travel: 90 mm Spindle mount: DIN 55029 (Camlock) D1-4 Spindle bore: Ø 40 mm Max. chuck diameter: Ø 200 mm Spindle speed, stepless: 30 – 2,500 rpm Mechanical speed ranges: 3 Motor power: 2.2 kW Longitudinal feed Z: (40) 0.044 – 1.96 mm/rev Cross feed X: (40) 0.022 – 0.98 mm/rev Metric threads: (32) 0.4 – 7.0 mm Inch threads: (32) 4 – 56 TPI Module threads: (32) 0.4 – 7.0 Diametral pitch threads: (32) 7.5 – 112 Tailstock quill diameter: Ø 40 mm Tailstock quill taper: MT 3 Quill stroke: 100 mm Lateral adjustment: ± 10 mm Weight, approx.: 750 kg Dimensions, approx.: 1,880 x 880 x 1,390 mm Features: - Acceptance test certificate according to DIN Lhjdpfxeir Imye Ah Den - Precision, hardened and ground guideways - Robust headstock with oil circulation lubrication, precision spindle bearings, gears hardened and ground for long-lasting quality - Electromagnetic spindle brake (TC), frequency inverter with electric brake (V models) - Torsion-resistant machine bed made of Meehanite quality cast iron, stress-relieved and heavily ribbed for maximum running smoothness - Electrical equipment from SIEMENS/SCHNEIDER - Feed gearbox overload protection - Pulse button for main spindle - CE / IEC-compliant, with German documentation and German service Standard equipment (basic accessories): - Machine stand with rear splash guard - 3-jaw chuck - 4-position toolholder - Foot pedal with mechanical brake - Coolant system - Chuck guard and spindle cover compliant with European CE safety standards - 1 fixed centre for main spindle - 1 fixed centre MT3 - 1 test certificate - Safety devices and electrical equipment compliant with CE - Reducing sleeve for main spindle - Operating tools Available options for this lathe: - 3-axis digital readout - Multifix quick-change toolpost system Also available with gearbox variants

Stanje: novo, Bernardo Universal Lathe Solid 460 x 2000 Pro Vario Technical Specifications Centre distance: 2000 mm Centre height: 230 mm Swing over bed: 460 mm Swing over gap: 690 mm Swing over cross slide: 274 mm Bed width: 300 mm Spindle bore: 80 mm Spindle mount: DIN 55029, D1-8 Speed range: 25 – 250 / 250 – 1700 rpm Longitudinal feeds (42): 0.055 – 3.065 mm/rev Cross feeds (42): 0.025 – 1.386 mm/rev Metric threads (41): 0.1 – 14 mm Inch threads (60): 2 – 112 TPI Quill diameter: 60 mm Quill travel: 130 mm Quill taper: MT 4 Motor power: 5.5 kW (7.5 HP) Machine dimensions (W x D x H): 3250 x 1080 x 1370 mm Weight approx.: 2030 kg Features • Modern main spindle bearing with precision angular contact ball bearings • Standard Delta frequency inverter for high torque at low speeds and nearly constant speed under load • Stepless speed control; the set speed is shown on a digital display • Hardened and ground gears and shafts, also in the feed gearbox • Standard with rapid traverse (longitudinal and cross) to reduce non-productive times • Central, user-friendly control for feeds and threads, with leadscrew and feed shaft • Gears are oversized, hardened, and precision ground • Speed and feed adjustment is simple, smooth, and precise • The machine bed is cast in one piece, extremely torsion-resistant and low in vibration, meeting key requirements for accurate turning Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck PS3-250 mm / D8 Lhedpoxl Tcmjfx Ah Djn • Fixed steady rest – through-hole diameter max. 150 mm • Travelling steady rest – through-hole diameter max. 110 mm • Initial fill with Shell Tellus 46 • Face plate 450 mm • Quick-change toolpost with 4 holders • Safety guard for quick-change toolpost • Foot pedal with brake function (CE compliant) • Coolant system • Frequency inverter • Slip clutch • Rapid traverse (longitudinal and cross) • Change gears • Reducing sleeve • 2 centre points • Thread dial • LED machine lamp • Chip guard (rear wall) • Operating tools

Stanje: rabljeno, Leto izdelave: 1975, skupna dolžina: 4.400 mm, skupna širina: 1.450 mm, skupna višina: 1.700 mm, Poids à vide : 4 000 kg Lhodpfx Asxixh Noh Don - Commande : Conventionnelle - Hauteur de pointe [mm] : 230 - Diamètre tournant au-dessus du banc [mm] : 460 - Distance entre pointes [mm] : 2000 - Passage de broche [mm] : 70 - Vitesse de broche min. [tr/min] : 7,1 - Vitesse de broche max. [tr/min] : 1 400 - Options : Mandrin trois mors, porte-outil à changement rapide, lunette à suivre, lunette fixe - Année de fabrication : 1975 - Documentation disponible : Oui - Numéro de série : 1677 - Dimensions de transport : 4 400 mm x 1 450 mm x 1 700 mm (L x l x h) - Poids transport [kg] : 4 000 kg - Colis de transport [pcs.] : 4 Informations financières TVA : Le prix indiqué s'entend hors TVA TVA/régime de la marge : TVA récupérable pour les professionnels Livraison et reprise possibles à tout moment pour tout équipement industriel Bram van Summeren

Stanje: novo, Leto izdelave: 2025, Swing diameter over bed 400 mm Swing diameter over cross-slide 246 mm Turning length 1250 mm Centre height 195 mm Spindle bore 54 mm Drive power 7.5 kW Lhjdpfx Ahswp Tbgo Don - New machine - - Handwheel on the left of the cross-slide with 3-axis digital readout FAGOR INNOVA 30iT and micrometer for bed * For more information about the precise standard configuration and available options, please visit our website or contact us directly *

Stanje: novo, The Turnado 230/2000 is a state-of-the-art conventional lathe that forms part of the universal lathe product line. With this machine, KNUTH has developed a precise and powerful tool that impresses with its robust construction and long service life. Equipped with a high-performance motor and a wide range of useful accessories, this machine meets various production demands. Its stable design and heavy, one-piece cast bed ensure high stability during machining, while the user-friendly control panel on the headstock and the 3-axis position display provide easy operation and great accuracy. Additionally, the adjustable longitudinal stops allow for automated feed disengagement, significantly simplifying repeat operations. The Turnado 230/2000 is perfectly suited for long workpieces, thanks to standard accessories that include both a traveling and a fixed steady rest. If you are ready to acquire this robust universal lathe, order now or request a quote. Ljdsp Ebgropfx Ah Dohn

Stanje: zelo dobro (rabljeno), Leto izdelave: 1972, Natančni stružni stroj, stružnica, stružniška klop, stružnica z vodilnim in vijačnim vretenom -Proizvajalec: VDF Heidenreich & Harbeck, stružnica z vodilnim in vijačnim vretenom, tip 24R0 -Strojna postelja: kaljena -Stružna dolžina: 1230 mm -Premer struženja nad posteljo: 500 mm -Premer struženja nad izrezom: 355 mm -Premer struženja nad suportom: 290 mm -Vrtina vretena: Ø 56 mm Lhedpfx Aew Sxgxoh Den -Število vrtljajev vretena: 19 - 2000 obr/min -Klinasta glava: Forkardt Ø 250 mm -Konus konjička: MK4 -Pogon: 5,5 kW -Dodatki: 1x podporni nosilec, 7x Multifix nosilcev orodij, glej fotografije -Dimenzije: 1180/3050/V1345 mm -Teža: 1907 kg

Stanje: novo, TC 205 x 1000 Lhjdpfxoir If De Ah Den Centre height: 205 mm Swing diameter over bed: 410 mm Distance between centres: 1000 mm Bed width: 260 mm Spindle nose: DIN 55029 (Camlock) 9, size 6 Cross slide travel: 220 mm Top slide travel: 125 mm Spindle bore: 52.5 mm Spindle speeds: 20 - 3000 rpm Speed control: Infinitely variable Mechanical speed ranges: 2 Motor power: 3.75 kW Coolant pump: 0.13 kW Longitudinal feeds Z: 0.05 - 1.7 mm/rev Cross feeds X: 0.025 - 0.85 mm/rev Whitworth threads: (45) 2 - 72 TPI Metric threads: (39) 0.2 - 14.0 mm Diametral pitch threads: (21) 8 - 44 DP Module threads: (18) 0.3 - 3.5 MP Tailstock quill diameter: 52 mm Tailstock taper: MT 4 Tailstock quill stroke: 150 mm Dimensions: 2270 x 1120 x 1900 mm Weight, approx.: 1500 kg Features: - Machine tool accuracy according to DIN 8605 - Infinitely variable speed control (2 mechanical speed ranges) - Precision-balanced main spindle - Rigid machine bed with hardened and ground guideways - Monolithic cast-iron base - Adjustable precision taper roller bearings in the main spindle - Easy-to-operate feed gearbox with a wide feed range running in an enclosed oil bath - Low-maintenance central lubrication - Removable gap bridge Scope of delivery: - 3-axis digital readout (resolution 0.005 mm) - 3-jaw chuck - Quick-change tool post with four tool holders - High splash guard with integrated LED trough light - Pull-out chip tray at the front - Overload clutch - Fixed steady rest with ball bearing inserts - Travelling steady rest - Micrometer bed stop - Machine pads (1 set of 6 pieces) - Two emergency stop buttons - Foot pedal with dual brake system (mechanical and electrical) - Chuck guard, tool post guard and leadscrew cover with limit switch protection in accordance with European CE safety standards - Coolant system - 2 fixed centres - Reducing sleeve for main spindle - Operating tools - Operating tools in toolbox - Operating manual with spare parts list

Stanje: novo, Bernardo Universal Lathe Solid 460 x 1000 Pro Vario Technical Specifications Centre distance: 1000 mm Centre height: 230 mm Swing over bed: 460 mm Swing over gap: 690 mm Swing over cross slide: 270 mm Bed width: 300 mm Spindle bore: 80 mm Spindle mount: DIN 55029, D1-8 Lhedpoxl Tcajfx Ah Den Spindle speed range: 25 – 250 / 250 – 1700 rpm Longitudinal feed range (42): 0.055 – 3.065 mm/rev Cross feed range (42): 0.025 – 1.386 mm/rev Metric threads (41): 0.1 – 14 mm Imperial threads (60): 2 – 112 TPI Tailstock quill diameter: 60 mm Tailstock quill travel: 130 mm Tailstock taper: MT 4 Motor power: 5.5 kW (7.5 HP) Machine dimensions (L x W x H): 2300 x 1080 x 1600 mm Weight approx.: 1730 kg Features • Modern main spindle bearing with precision angular contact ball bearings • Standard with Delta frequency inverter for high torque at low speeds and nearly constant speed under load • Infinitely variable speed control, set speed readable on digital display • Hardened and ground gears and shafts, including in the feed gearbox • Rapid traverse (longitudinal and cross) as standard to reduce idle times • Central, ergonomic controls for feeds and threading, with lead screw and feed shaft • Gears are large, hardened, and ground to precision • Speed and feed adjustment is simple, smooth, and precise • The machine bed is cast in one piece, extremely torsion-resistant and low-vibration, providing the basis for precise turning operations Scope of delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck PS3-250 mm / D8 • Fixed steady rest – max. passage diameter 150 mm • Travelling steady rest – max. passage diameter 110 mm • First fill with Shell Tellus 46 • Faceplate 450 mm • Quick-change tool post with 4 holders • Safety guard for quick-change tool post • Foot pedal with brake function according to CE • Coolant system • Frequency inverter • Safety slip clutch • Rapid traverse (longitudinal and cross) • Change gears • Reducing sleeve • 2 centre points • Thread dial indicator • LED machine light • Chip guard at rear • Operating tools

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Tehnični podatki: Višina konice: 500 mm Premer struženja: 1090 mm Premer struženja nad saneh: 690 mm Razdalja med konicama: 1500 mm Obrati: 6 – 1250 obr/min Premer vretena: 155 mm Digitalni prikaz položaja: SONY Širina postelje: 700 mm Orodje – vpenjalni stožec: MK 6 Moč motorja: 30 kW Oznaka CE Dimenzije (D x Š x V): pribl. 3500 x 1750 x 1900 mm Teža: pribl. 7,5 t Oprema: Ledpfsxlgmfox Ah Dshn Centralno mazanje Naprava za hlajenje Zadnji ščit pred brizganjem 3-čeljustni vpenjalni tulec 500 mm 4-čeljustni vpenjalni tulec 800 mm Prodajalec ne odgovarja za tipkarske ali prenosne napake. Stroj je glede na starost v ustreznem stanju glede izgleda, tehnike in obrabe; rabljeni stroji se prodajajo brez kakršnegakoli jamstva.

Stanje: novo, Bernardo Universal Lathe Smart 410 x 1500 Pro Vario Technical Specifications Centre Distance: 1500 mm Centre Height: 210 mm Swing over Bed: 420 mm Swing over Gap: 580 mm Swing over Cross Slide: 255 mm Bed Width: 250 mm Spindle Bore: 52 mm Spindle Mount: DIN 55029, D1 – 6 Speed Range, 2 Stages: 30 – 550 / 550 – 3000 rpm Longitudinal Feed Range (17): 0.05 – 1.7 mm/rev Cross Feed Range (17): 0.025 – 0.85 mm/rev Metric Threads (42): 0.2 – 14 mm Imperial Threads (45): 2 – 72 TPI Quill Diameter: 50 mm Quill Travel: 140 mm Quill Taper: MK 4 Motor Power: 5.5 kW (7.5 HP) Machine Dimensions (W x D x H): 2590 x 1050 x 1600 mm Weight approx.: 1325 kg Features • Supplied as standard with Delta frequency inverter for high torque at low speeds and nearly constant speed under load Lhjdpfx Aexl Ta Sjh Dsn • Infinitely variable speed control; the set speed is displayed digitally • Prism bed made of cast iron, inductively hardened and precision ground • Central, user-friendly feed and threading controls with lead and feed shaft • Modern headstock bearings with high-precision angular contact ball bearings • Equipped as standard with frequency inverter and 3-axis digital readout • Hardened and ground gears and shafts, including the feed gearbox • Simple, smooth, and precise speed and feed adjustment • Traversable tailstock for taper turning, handwheel with adjustable fine scale (0.02 mm) • Removable gap enables machining of large-diameter workpieces Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw steel chuck PO3-200 mm / D6 • Faceplate 350 mm • Fixed steady rest – max. Ø 135 mm • Travelling steady rest – max. Ø 65 mm • Foot pedal with brake function according to CE • Four-way tool post • Safety device for four-way tool post • Micrometer longitudinal stop • Turret stop with fine adjustment • Frequency inverter • Initial fill with Shell Tellus 46 • Coolant system • Slip clutch • Threading dial • LED machine lamp • Change gears • Reducing sleeve • 2 centres • Chip guard • Operating tools

Stanje: novo, Bernardo Universal Lathe Smart 410 x 1000 Pro Vario Technical Specifications Centre Distance: 1000 mm Centre Height: 210 mm Swing Over Bed: 420 mm Swing Over Gap: 580 mm Swing Over Cross Slide: 255 mm Bed Width: 250 mm Spindle Bore: 52 mm Spindle Mount: DIN 55029, D1 – 6 Speed Range, 2 Steps: 30 – 550 / 550 – 3000 rpm Longitudinal Feeds (17): 0.05 – 1.7 mm/rev Cross Feeds (17): 0.025 – 0.85 mm/rev Metric Threads (42): 0.2 – 14 mm Imperial Threads (45): 2 – 72 TPI Quill Diameter: 50 mm Quill Travel: 140 mm Lsdpfx Aoxl Tareh Dohn Quill Taper: MT 4 Motor Power: 5.5 kW (7.5 HP) Machine Dimensions (W x D x H): 2090 x 1050 x 1600 mm Approx. Weight: 1145 kg Features • Supplied as standard with Delta frequency inverter for high torque at low speeds and nearly constant speed under load • Infinitely variable speed control; set speed is shown on digital display • Prism bed made of cast iron, inductively hardened and precision ground • Central, user-friendly controls for feeds and threading via leadscrew and feed shaft • Modern main spindle bearing with precision angular contact bearings • Standard equipment includes frequency inverter and 3-axis digital readout • Hardened and ground gears and shafts, also in the feed gearbox • Speed and feed selection are simply designed, smooth, and precise to operate • Sliding tailstock for taper turning, handwheel with adjustable fine scale (0.02 mm) • Removable bridge allows machining of workpieces with large diameters Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw steel chuck PO3-200 mm / D6 • Face plate 350 mm • Fixed steady rest – max. passage diameter 135 mm • Travelling steady rest – max. passage diameter 65 mm • Foot pedal with CE brake function • Four-way tool post • Safety guard for four-way tool post • Micrometer longitudinal stop • Turret stop with fine adjustment • Frequency inverter • Initial filling with Shell Tellus 46 • Coolant system • Slip clutch • Thread dial indicator • LED machine lamp • Change gears • Reducing sleeve • 2 centre points • Chip guard • Operating tools

Stanje: novo, Bernardo Universal Lathe Solid 460 x 2000 Pro Technical Specifications • Distance between centers: 2000 mm • Center height: 230 mm • Swing over bed: 460 mm • Swing over gap: 690 mm • Swing over cross slide: 270 mm • Bed width: 300 mm • Spindle bore: 80 mm • Spindle mount: DIN 55029, D1-8 • Speed range (12 steps): 25 – 1700 rpm • Longitudinal feed range (42 steps): 0.055 – 3.065 mm/rev • Cross feed range (42 steps): 0.025 – 1.386 mm/rev • Metric threads (41): 0.1 – 14 mm • Inch threads (60): 2 – 112 TPI • Quill diameter: 60 mm • Quill travel: 130 mm • Quill taper: MT 4 • Motor power: 5.5 kW (7.5 HP) • Machine dimensions (W x D x H): 3250 x 1080 x 1600 mm • Weight: approx. 1995 kg Features • Modern main spindle bearing with precision angular contact ball bearings • Hardened and ground gears and shafts, including in the feed gearbox • Central, user-friendly control for feeds and threads via leadscrew and feedscrew Lhedpfexl Dzasx Ah Djn • Large-sized, hardened, precision-ground gears • Simple, smooth and precise speed and feed adjustment • Rapid traverse in longitudinal and cross axes as standard for reduced non-productive times • One-piece cast machine bed, extremely rigid and low in vibration, ensuring high precision turning Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck PS3-250 mm / D8 • Faceplate 450 mm • Coolant system • Initial fill with Shell Tellus 46 • Fixed steady rest – max. workpiece diameter 150 mm • Follow rest – max. workpiece diameter 110 mm • Quick-change tool post with 4 holders • Safety device for quick-change tool post • Motor with magnetic brake according to CE standards • Foot pedal with brake function according to CE • Slip clutch • Rapid traverse for longitudinal and cross travel • Change gears • 2 dead centers • Reducing sleeve • Thread chasing dial • LED machine lamp • Chip guard (rear) • Operating tools

Stanje: novo, Bernardo Universal Lathe Solid 460 x 1500 Pro Technical Specifications Centre Distance: 1500 mm Centre Height: 230 mm Swing Over Bed: 460 mm Swing Over Gap: 690 mm Swing Over Cross Slide: 270 mm Bed Width: 300 mm Spindle Bore: 80 mm Spindle Mount: DIN 55029, D1-8 Spindle Speed Range (12 steps): 25 – 1700 rpm Longitudinal Feed Range (42 steps): 0.055 – 3.065 mm/rev Cross Feed Range (42 steps): 0.025 – 1.386 mm/rev Metric Threads (41): 0.1 – 14 mm Imperial Threads (60): 2 – 112 TPI Quill Diameter: 60 mm Quill Travel: 130 mm Quill Taper: MT 4 Motor Power: 5.5 kW (7.5 HP) Machine Dimensions (W x D x H): 2750 x 1080 x 1600 mm Weight: approx. 1845 kg Features - Modern headstock bearing with precision angular contact ball bearings - Hardened and ground gears and shafts, including in the feed gearbox Ljdpfx Ahoxl Dyvs Dohn - Central, easy-to-use control for feed and threads with leadscrew and feed rod - Large-dimension, hardened and precision-ground gears - Simple, smooth, and precise adjustment of speeds and feeds - Standard rapid traverse (longitudinal and cross) to minimize non-cutting time - Machine bed cast in one piece, extremely torsion-resistant and vibration-damping, providing essential stability for precise turning Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck PS3-250 mm / D8 • Face plate 450 mm • Coolant system • Initial filling with Shell Tellus 46 • Fixed steady rest – max. bore diameter 150 mm • Travelling steady rest – max. bore diameter 110 mm • Quick-change tool post with 4 holders • Safety guard for quick-change tool post • Motor with electromagnetic brake to CE standard • Foot pedal with brake function to CE • Overload clutch • Rapid traverse, longitudinal and cross • Change gears • 2 centre points • Reducing sleeve • Thread dial indicator • LED machine lamp • Chip guard rear panel • Operating tools

Stanje: novo, Bernardo Universal Lathe Smart 410 x 1000 Pro Technical Specifications Centre Distance: 1000 mm Centre Height: 210 mm Swing Over Bed: 420 mm Swing Over Gap: 580 mm Swing Over Cross Slide: 255 mm Bed Width: 250 mm Spindle Bore: 52 mm Spindle Mount: DIN 55029, D1 – 6 Speed Range (16): 45 – 1800 rpm Longitudinal Feed Range (17): 0.05 – 1.7 mm/rev Cross Feed Range (17): 0.025 – 0.85 mm/rev Metric Threads (42): 0.2 – 14 mm Inch Threads (45): 2 – 72 TPI Quill Diameter: 50 mm Quill Travel: 140 mm Quill Taper: MT 4 Motor Power: 3.0 / 4.5 kW Machine Dimensions (W x D x H): 2070 x 900 x 1600 mm Weight (approx.): 1220 kg Features • Prism bed made from grey cast iron, induction-hardened and precision ground • Electromechanical foot brake for reduced secondary times • Central, user-friendly control for feeds and threads with leadscrew and feed rod Lhedsxl Dx Eopfx Ah Don • Modern main spindle bearing arrangement with precision angular contact ball bearings • Oversized, hardened and precision-ground gears • Hardened and ground gears and shafts, also in the feed gearbox • Simple, smooth, and precise speed and feed adjustments • Adjustable, sliding tailstock for taper turning with handwheel featuring fine graduations (0.02 mm) • Removable gap bridge for machining large-diameter workpieces Scope of Delivery • Prism bed made from grey cast iron, induction-hardened and precision ground • Electromechanical foot brake for reduced secondary times • Central, user-friendly control for feeds and threads with leadscrew and feed rod • Modern main spindle bearing arrangement with precision angular contact ball bearings • Oversized, hardened and precision-ground gears • Hardened and ground gears and shafts, also in the feed gearbox • Simple, smooth, and precise speed and feed adjustments • Adjustable, sliding tailstock for taper turning with handwheel featuring fine graduations (0.02 mm) • Removable gap bridge for machining large-diameter workpieces

Stanje: novo, Bernardo Universal Lathe Smart 410 x 1500 Pro Lodpfx Ahsxl Dwuo Djhn Technical Specifications Centre distance: 1500 mm Centre height: 210 mm Swing over bed: 420 mm Swing over gap: 580 mm Swing over cross slide: 255 mm Bed width: 250 mm Spindle bore: 52 mm Spindle mount: DIN 55029, D1-6 Speed range (16 steps): 45 – 1800 rpm Longitudinal feed range (17 steps): 0.05 – 1.7 mm/rev Cross feed range (17 steps): 0.025 – 0.85 mm/rev Metric threads (42): 0.2 – 14 mm Imperial threads (45): 2 – 72 TPI Quill diameter: 50 mm Quill travel: 140 mm Quill taper: MT 4 Motor power: 3.0 / 4.5 kW Machine dimensions (L x W x H): 2570 x 900 x 1600 mm Weight approx.: 1400 kg Product Features • Prism bed made of cast iron, induction hardened and precision ground • Electromechanical foot brake to minimise auxiliary times • Central, user-friendly control for feeds and threads using feed and leadscrew • Modern precision headstock bearing with angular contact ball bearings • Large, hardened, precision-ground gears • Hardened and ground gears and shafts, also in the feed gearbox • Easy and precise adjustment of speeds and feeds • Adjustable tailstock for taper turning, handwheel with fine scale (0.02 mm) • Removable bridge allows machining of large-diameter workpieces Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck DK11-200 mm / D6 • Faceplate 350 mm • Fixed steady rest – max. pass-through diameter 135 mm • Travelling steady rest – max. pass-through diameter 65 mm • Coolant system • Four-way toolpost • Safety guard at toolpost • Micrometric longitudinal stop • Slip clutch • Turret stop with fine adjustment • Thread dial indicator • Motor with electromagnetic brake, CE compliant • Foot pedal with brake function, CE compliant • Initial fill with Shell Tellus 46 • LED machine lamp • Change gears • Reducing sleeve • 2 centre points • Chip guard • Service tools

Stanje: novo, Bernardo Universal Lathe Solid 460 x 1000 Pro Centre Distance: 1000 mm Centre Height: 230 mm Swing Over Bed: 460 mm Swing Over Gap: 690 mm Swing Over Cross Slide: 270 mm Bed Width: 300 mm Spindle Bore: 80 mm Spindle Mount: DIN 55029, D1-8 Speed Range: (12) 25 – 1700 rpm Longitudinal Feed Range: (42) 0.055 – 3.065 mm/rev Cross Feed Range: (42) 0.025 – 1.386 mm/rev Metric Threads: (41) 0.1 – 14 mm Imperial Threads: (60) 2 – 112 TPI Quill Diameter: 60 mm Quill Travel: 130 mm Quill Taper: MT 4 Motor Power: 5.5 kW (7.5 HP) Machine Dimensions (W x D x H): 2300 x 1080 x 1600 mm Weight approx.: 1675 kg Features: • Modern main spindle bearing with precision angular contact ball bearings • Hardened and ground gears and shafts, including feed gearbox • Central, user-friendly control for feeds and threads via leadscrew and feed rod • Large-dimensioned, hardened and precision-ground gears • Simple, smooth, and precise adjustment of speeds and feeds • Rapid traverse (longitudinal and cross) standard to minimize idle times • One-piece, ribbed bed casting highly torsion-resistant and low-vibration for high-precision turning operations Scope of Delivery: • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck PS3-250 mm / D8 • Face plate 450 mm • Coolant system • Initial filling with Shell Tellus 46 • Fixed steady rest – max. passage Ø 150 mm • Follow (travelling) steady rest – max. passage Ø 110 mm • Quick-change tool post with 4 holders • Safety guard for quick-change tool post • Motor with magnetic brake, CE compliant • Foot pedal with brake function, CE compliant • Safety slip clutch • Rapid traverse longitudinal and cross • Change gears • 2 centre points • Reducing sleeve Ljdpfsqwkd Usx Ah Djhn • Thread dial indicator • LED machine lamp • Chip guard • Operating tools