Stroji za globoko vrtanje nakup rabljenega (84)

Stanje: rabljeno, Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 106546-11, skupna višina: 3.550 mm, skupna dolžina: 7.185 mm, skupna širina: 4.720 mm, skupna masa: 8.000 kg, The drilling method of the deep hole drilling machine is single-lip (gun drilling). Drilling Unit Information: - Number of spindles: 1 - Spindle speed, steplessly adjustable: 500 - 8,000 rpm - Spindle drive power: 11 kW at 60% duty cycle - Maximum drilling depth: 1,000 mm (in one pass, without retraction) - Drilling diameter: 3 - 35 mm (based on ST 60) - Drilling diameter with indexable inserts: 40 mm - Maximum thread tapping: M27 - Milling material removal rate: 250 ccm/min Travel Axes: - X-axis travel: 1,050 mm - Y-axis travel: 600 mm - Z-axis travel: 800 mm - W-axis travel: 1,250 mm (with 2 steady rests) Traverse Speeds: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 1,200 liters - 1x hinge belt chip conveyor Dsdpfx Afoxdm Awsqocr - 1x screw conveyor system - 1x hydraulic unit and pneumatic unit/equipment - 1x central lubrication - 1x submersible pump: Pump delivery rate: 200 l/min - 1x low-pressure pump: Pump delivery rate: 100 l/min Pump drive: 2.2 kW - 1x compact belt filter: Filtration rate: 175 l/min For machining steel/non-ferrous materials - 1x radial piston pump with remote adjustment: Delivery rate: 2 - 120 l/min Pump drive: 11 kW - 1x air cooler (heat exchanger) 22.5 kW - 1x oil mist extraction system, Extraction capacity: 1,250 m³/h Milling and Drilling Spindle Unit: - For conventional machining - Spindle head with SK 40 tool holder Tool Change Magazine consists of: - Tool magazine with intermediate gripper - SK 40 tool holders - Max. permitted tool diameter: 80 mm - Max. permitted tool length: 250 mm - Tool storage positions: 80 - 2x swivelling tool steadies for guiding and supporting long drilling tools, with automatic return to home position. Clamping table with B axis and NC rotary table: - Length/width: 800x600 mm - B axis: 360° - Positioning accuracy B axis: +/- 30" - Table travel: 800 mm - Payload (centrical): 1,500 daN Electrical Equipment: - 1x CNC control, Heidenhain iTNC 530 - 1x drilling process monitoring - 1x RENISHAW probe Connection Data: - Operating voltage: 3AC 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 26 kW

Stanje: rabljeno, Leto izdelave: 1965, Core drilling diameter - max. 50 mm Drilling depth 2000 mm Swing diameter mm Drilling diameter max. 110 mm Total power requirement 30 kW Machine weight approx. 10 t Year of manufacture: 1965 Dsdpjt Hwucsfx Afqocr Overhauled: 2000 Drilling Ø - Solid drilling approx. 2 - 50 mm - Boring out approx. 100 mm Drilling depth max. 1,600/possibly up to 2,000 mm (see stroke/installation length) Stroke of drilling carriage approx. 4,000 mm Distance between the two spindle heads 5,000 mm Center height above guideway 350/450 mm Feed rate of the drilling carriage, stepless: 20 - 200 mm/min Rapid traverse of the drilling carriage: 2,500 mm/min Workpiece speeds via belt pulley: 260 - 650/650-1625 RPM Main spindle drive 24 kW Coolant pump drives: 1 x 7.5/15 kW - 1 x 15/28 kW Total drive approx. 60 kW 380 V - 50 Hz Total length of machine/guideways 7500/5000 mm Total weight approx. 10,000 kg Accessories / Special equipment: "Machine consists of the following elements: The main spindle on the left, followed by a BOZA, table group driven by ball screw spindle, BOZA with increased center height, and at the end a spindle head of the B 16 series with drive motor approx. 7.5 kW n = 900/2400 and 2400/6000; very large and elaborate coolant system with filtration unit, extensive accessories and drilling tools up to 100 mm Ø. " Suitable for rotating workpiece/fixed drilling tool/ELB and BTA processes, as well as for stationary workpiece and rotating drilling tool. Can operate with internal oil supply (ELB) as well as external oil supply (BTA). " Complete coolant oil system with tank and filter, 2 high-pressure pumps by SIG, adjustable flow rate/min = 17/40/120 or 220/500 l/min. Capacity approx. 2,500 l. " Feed of the main carriage via ball screw spindle and steplessly controllable DC motor; currently, a cross-adjustable table approx. 500 mm, size approx. 800 x 800 mm, is mounted for clamping cubic and cylindrical workpieces. Electrical control via cam track approx. 2,500 mm and limit switches for rapid traverse, feed, and return. " 2 closed 3-point steady rests, FORKHARDT 3-jaw manual chuck approx. 315 mm Ø, " Modernized control panel with speed display, feed setting and display, kW display, feed/rapid traverse switch (forward/reverse), etc. " 2 separate control cabinets, separate BOZA, sleeves, reducers, clamping aids, etc. Condition: good - soon ready for demonstration, machine is very valuable due to accessories Delivery: ex stock - as inspected Payment: strictly net - upon receipt of invoice Further deep hole drilling machines constantly in stock - please contact us.

Stanje: potreben popravila (rabljeno), Leto izdelave: 1996, For sale: IXION Cycle Deep Hole Drilling Machine TL 601 Unfortunately, the machine is currently experiencing electrical issues. The machine constants need to be reloaded by a technician, and the backup battery requires replacement. A new LCD display (LED) was recently installed. Machine No.: 950192 Year of manufacture: 1996 Manufacturer: Maschinenfabrik IXION Otto Hafner -Travels + Quill TL 601 (Z) 600 mm + Drilling unit vertical (Y) 300 mm + Table cross travel (Table surface 1200 mm x 600 mm) (X) 700 mm + In drilling direction (W) 1000 mm -Clamping table + Table surface (standard) 1200 mm x 600 mm + Table load capacity (T1200) 1000 kg -Tool holder + Taper SK 40 (to DIN standard) + Drawbar 69871 (per DIN 69872) -AC main spindle drive 3.0 kW + At 100% duty cycle, S1 5.5 kW + At 50% duty cycle, S6 7.5 kW + Spindle speed (directly programmable) 100–4000 rpm Performance: + Drilling capacity in steel 2312 D 32 mm + Tapping M24 -Weight / Dimensions Weight: 2500 kg Length approx.: 4230 mm Width approx.: 1885 mm Height approx.: 1870 mm Dedpfx Aoh Dpv Rsfqscr All prices plus VAT. We can deliver and commission the machine. All prices plus VAT. Machinery Purchase & Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours?

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2017, obratovalne ure: 428 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 428, globina vrtanja: 400 mm, največja hitrost vretena: 23.700 obr/min, premer vrtanja: 6 mm, število vreten: 1, dolžina obdelovanca (maks.): 450 mm, No reserve price – guaranteed sale to the highest bidder! The machine has only 428 operating hours! TECHNICAL DETAILS Control system: SFT TBS 200 Drilling method: single-lip deep hole drilling Number of spindles: 1 Drilling diameter in steel: 1 – 6 mm Drilling depth with retractable spindle: 120 mm Drilling depth with sealing unit only: 400 mm Sealing unit with one-piece steady rest: 350 mm Max. workpiece length: 450 mm Max. rapid feed: 4,000 mm/min Spindle drive: Dcjdpfswu Eb Ajx Afqjr Power at 2,810 rpm: 2 kW Power at 7,880 rpm: 3.5 kW Power at 23,700 rpm: 1.5 kW Frequency range: 100 – 800 Hz Tailstock: Motor power: 0.75 kW Spindle speed: 500 rpm Max. clamping stroke: 60 mm Feed carriage drive: Type: ball screw 25 × 5 mm with servo motor Drill bush holder and chip removal: Drill bush holder: rigidly mounted on machine bed Components: drill bush holder and sealing unit by BOTEK Chip removal: downward into chip container MACHINE DETAILS Dimensions: 2.7 x 3.05 x 1.7 m Weight: 2.5 t Operating hours: 248 h Operating voltage: 400 V Frequency: 50 Hz Connected load: 14 kW Coolant system: Tank capacity: approx. 500 l Filtration: integrated paper band filter Coolant pump: one-piece with frequency converter Delivery rate: approx. 5 – 12 l/min Max. coolant pressure: 160 bar EQUIPMENT - Hydraulic tailstock (can be engaged) - Manual tailstock adjustment for various workpiece lengths - Drill bush holder and sealing unit by BOTEK - Direct chip removal into collection container - Integrated coolant system with paper band filter - Complete with deep hole drilling tool and technical documentation Transport possible with standard truck

Stanje: rabljeno, Stroj za globoko vrtanje TBT T10-120 Dcsdpfx Afjxbtzzoqsr

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, globina vrtanja: 1.500 mm, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 1.200 mm, pomik po osi Z: 1.300 mm, največja hitrost vrtenja: 5.600 obr/min, TEHNIČNI PODATKI Podatki o vrtanju Vrtalna globina: 1.500 mm Podatki o ose Pomik X-os: 3.000 mm Pomik Y-os: 1.200 mm Pomik Z-os: 1.300 mm Podajalna hitrost X-os: 15 m/min Podajalna hitrost Y-os: 15 m/min Podajalna hitrost Z-os: 15 m/min Podajalna sila: 30.000 N Hitrost hitrega pomika: 15 m/min Dcedpfow Izr Ajx Afqer Podatki o vretenu Število vrtljajev: min. 300 1/min Število vrtljajev: maks. 5.600 1/min Podatki o mizi Vpenjalna površina: 2.000 mm x 1.250 mm Število utorov: 7 Obremenitev mize: 12.000 kg Vpenjalo za orodje: SK50 PODROBNOSTI O STROJU Krmiljenje: TNC430 Mere in teža Mere (D x Š x V): 8.400 x 8.300 x 4.500 mm Skupna teža: 30.000 kg OPREMA Brezstopenjsko nastavljivo število vrtljajev Brusilnik za svedre Opomba: Demontaža in nakladanje se lahko ponudita za 8.000 €.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 106341-11, Leto izdelave: 2005, skupna masa: 8.000 kg, skupna višina: 2.700 mm, skupna dolžina: 5.660 mm, skupna širina: 3.956 mm, The drilling method used by the deep hole drilling machine is single-lip drilling. Drilling unit information: - Number of spindles: 1 - Continuously variable spindle speed: 300 - 8000 rpm - Spindle drive power: 7.5 kW - Maximum drilling depth: 800 mm - Minimum/maximum drilling diameter: 3 - 25 mm (based on ST 60) - Maximum spiral drilling: 25 mm - Maximum tapping: M24x3 - Milling material removal rate: 150 cc/min Travel distances: - X-axis travel: 800 mm - Y-axis travel: 400 mm - Z-axis travel: 630 mm - W-axis travel: 800 mm Traverse speeds: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Coolant system information: - Deep-hole drilling oil as coolant - Tank capacity: 800 litres - 1x scraper belt swarf conveyor - 1x hydraulic power unit and pneumatic system/equipment - 1x submersible pump: Pump capacity: 200 l/min - 1x low-pressure pump: Pump capacity: 100 l/min Pump drive: 1.7 kW - 1x compact belt filter: Filtration capacity: 120 l/min For use with: steel/non-ferrous materials - 1x radial piston pump with remote adjustment: Delivery rate: 2 - 94 l/min Pump drive: 7.5 kW Spindle unit: - Cartridge-type spindle with drive housing and gear-driven spindle drive. Spindle bearings are precision angular contact ball bearings with lifetime grease lubrication. Djdpfxew E H E Re Afqscr Milling and drilling spindle unit: - For conventional machining - Spindle head with HSK 50 tool holder Drill bush carrier: - Version as a 2-position turret with electric swivel mechanism - Positioning via Hirth coupling - Turret head equipped for: - Tool guides for deep hole drilling - Milling and drilling spindle unit for conventional machining Pickup tool changer: - For conventional tools and drill bushes - Disc-type magazine with 20 positions including pick-up stroke Automatic tool changer for deep hole drilling tools: - Fixed ELB column magazine for at least 5 tools, including automatic tool clamping for HSK holders Clamping table with W-axis and NC rotary table: - Length/width: 800x600 mm - Positioning accuracy: B-axis +/- 30 seconds - Load capacity (centrally): 1500 daN Workpiece clamping device: - 1x tailstock with manually operated clamping - 1x NC dividing head (A-axis) with manually operated two-jaw chuck for workpiece clamping - 1x base plate for mounting and clamping drill bushes + support prisms Electrical equipment information: - 1x CNC control Sinumerik 840D (digital complete system), including PLC S7-300 Connection data: - Operating voltage: 3-phase 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 25 kW

Stanje: rabljeno, Leto izdelave: 1985, Core drilling diameter - max. 18 mm Drilling depth 320 mm Swing diameter mm Total power requirement 33 kW Machine weight approx. 6 t Space requirement approx. m GILDEMEISTER & KNOLL / TBT Horizontal 2-spindle deep hole drilling machine Model 2 M 01-2-320 Year of manufacture 1985 / 1999 retrofitted and modernized by TBT Drilling - solid drilling approx. 1 - 18 mm Drilling - reaming approx. 25 mm Drilling depth 320 mm Centre height over bed/table 150 mm Stroke of drilling slide max. approx. 500 mm Stroke of positioning slide (linear guides) 500 mm Spindle distance 125 mm Drilling feed/rapid traverse stepless approx. 35 - 1,000/7,000 mm/min Centre distance between spindles approx. 125 mm Spindle speeds FORTUNA HF spindle up to max. 24,000 rpm (800Hz) Total drive of the complete machine approx. 33 kW - 400 V - 50 Hz Weight approx. 6,000 kg Accessories / Special equipment: - Machine currently set up for high-precision drilling of injection pump components (approx. Ø 25 x 150 mm, bore approx. 5 mm) which are fed via an inclined conveyor into a dual-orientation station, positionally checked, and then automatically and in pairs clamped in the machining zone between drill bushing carrier and powered tailstock via a loading portal (with 2 x double grippers) mounted transversely to the machine. After machining, the second set of grippers transfers the workpieces to a blow-off and drill breakage inspection station. After successful inspection, the workpieces fall into transport containers. - Sequence programming and monitoring via SIEMENS OP 17 PLC control. - 2 cooled and oil mist lubricated high-frequency spindles, make FORTUNA, approx. 2/3.5 kW power - Drilling slide feed via GS motor and ball screw - Separate drilling oil unit, approx. 1,500 litres, with various pumps and a sophisticated band filter cleaning system Dcodpfot Hwvasx Afqor - Separate hydraulic unit approx. 10 kW - Separate BKW cooling unit for spindle and hydraulic oil cooling - 2 separate control and switch cabinets, CE marked Condition: Good to very good - ready for demonstration soon Delivery: Ex stock - as inspected Payment: strictly net - upon receipt of invoice

Stanje: zelo dobro (rabljeno), Technical Data: - Min. drilling diameter: 16 mm - Max. drilling diameter: 35 mm - Reaming diameter: 65 mm - Max. drilling depth: 1,400 mm using ELB/BTA process - Machine footprint approx. 6,100 x 3,100 mm - Max. machine height: 2,400 mm - 2 separate drilling units mounted on the base machine bed, spindle distance 600 mm - Flat guideways - Feed drive via ball screw spindle and feed gearbox - Rapid traverse speed: 4,000 mm/min - Max. feed rate: 230 mm/min - Drive power (2 drilling spindles): 11 kW each - Stepless spindle speed up to max. 6,000 rpm - Hydraulically clamping tailstock with counter-rotation - Tailstock manually adjustable on base plate with longitudinal T-slots - Enclosure with sliding doors - 1 steady rest each - 1 rotatable clamping bell mount (base mount) each - 2 pre-centring units each Dcsdpfx Aowq I Iqefqer - Drilling depth control via cam and limit switch - CNC control SFT and FU, power supply 380 V / rated current 80 Amp. - Each unit has its own control system and dedicated feed motor With this machine, you are essentially getting two single-spindle machines, as each spindle is operated separately with its own control system and feed motor. We see ourselves as a competent partner in the field of deep hole drilling. We are also happy to receive inquiries for subcontracted deep hole drilling operations. Please feel free to contact us for any questions.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 106 155 - 11, (Please state your offer price) Djdpsw Agqhsfx Afqscr Sales only within Europe, including Turkey Price without packaging; Delivery condition: FCA (machine location) ===== For technical specifications, please refer to the attached handout. All warranties are excluded. We assume no liability for the accuracy of technical data and year of manufacture, for the completeness of accessories and tooling, or for compliance with all safety and environmental protection requirements stipulated in accident prevention regulations. No sales to private individuals.

Stanje: rabljeno, Stroj za globoko vrtanje TBT T10-2-500 Dcedpfx Afoxbtzusqjr

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, globina vrtanja: 750 mm, največja hitrost vretena: 6.720 obr/min, premer vrtanja: 20 mm, pomik vretena: 1.450 mm, razdalja med središči: 120 mm, TECHNICAL DETAILS Number of spindles: 4 Spindle spacing: 120 mm Spindle drive: 4 × 4 kW Spindle speed: 672 – 6,720 rpm Spindle stroke: 1,450 mm Drilling diameter: 4 – 20 mm Drilling depth: 750 mm EQUIPMENT - Chip conveyor - Air cooler Dcsdpfx Afowm Ebyjqor - Filtration unit - Circulating conveyor with workpiece carriers

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 106882-11, skupna dolžina: 4.400 mm, skupna širina: 1.700 mm, skupna višina: 2.700 mm, skupna masa: 7.000 kg, The drilling method of the deep hole drilling machine is the single-lip drilling process. Drilling unit information: - Drilling depth: 200 mm - Min./max. drilling diameter: 1–12 mm based on ST 60 - Number of spindles: 2 - Spindle center distance: 200 mm - Spindle drive: 2 x 2.4/4.2 kW - Spindle speed, stepless: 1,000 – 20,000 rpm - Feed rate, stepless: 10 – 25,000 mm/min - Rapid traverse: 25,000 mm/min - Slide travel (nominal): 650 mm - Slide width: 460 mm - X-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min - Y-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min Fluid information: - Coolant supply: deep-hole drilling oil - Tank capacity: 500 liters - 1x automatic filter, filter capacity: 50 l/min - 1x control filter - 2x ELB drilling oil supply - 1x flow divider Dsdpfswh Rp Esx Afqecr - 1x air cooler with circulation pump - 1x electrostatic oil mist extraction - 1x scraper belt chip conveyor - 1x hydraulic and pneumatic power unit/system - 1x sump pump - 3x submersible pumps - 1x radial piston pump with remote adjustment: Delivery rate: 1–38 l/min Pump drive: 7.5 kW Spindle unit: - Motor spindles with frequency-controlled stepless speed adjustment - Spindle head with connection for tool holder - 2 x tool holder for setting sleeves to VDI 3208 SE10x60, screwed onto the spindle head of the motor spindle Guide bush carrier: - The guide bush carrier is referenced via the NC axis - Cast design, mounted on linear guides - Drive for W-axis using AC servo motor and ball screw with indirect, absolute position measuring system Workpiece carriage: - The workpiece carriage is designed as a cross-slide for vertical and horizontal positioning of the workpiece, for mounting fixture plates or special clamping devices - Base body in cast design with linear roller guides - Drive for X and Y axes by AC servo motors and ball screws - Direct, absolute position measuring systems. Clamping/radial slot on table plate Clamping table with NC rotary table for positioning: - With rotary and swivel axes - Hydraulic clamping on both rotary and swivel axes Technical data: - Swivel range: 270° - Rotary range: 360° - Center height: 25 ± 0.02 - Spindle distance: 200 ± 0.005 - Indexing accuracy: rotary axis ± 15" / swivel axis ± 30" Electrical equipment information: - 1x drilling process monitoring - 1x CNC control 840D (Solution Line) Connection data: - Operating voltage: 3AC 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 25 kW Machine auxiliary equipment: - 2 x holder for spring-loaded guide bush, arranged on the guide bush carrier - For max. drilling diameter Ø 18 mm

Stanje: rabljeno, Leto izdelave: 1996, Core drilling diameter – max. 25 mm Drilling depth 1000 mm Swing diameter mm Total power requirement 25 kW Machine weight approx. 12.5 t Space requirements approx. m T B T CNC-controlled horizontal deep hole drilling machine Type BWP 250 Year of manufacture 1996, mechanically and electrically overhauled in 2006 _____ Working area: X-axis = Drilling carriage column approx. 2,000 mm Z-axis = Drilling carriage stroke approx. 1,200 mm Drilling depth with 2 steady rests approx. 1,000 mm Y-axis = Drilling carriage vertical stroke approx. 1,100 mm Table clamping area: 1,200 x 2,000 mm Drilling capacity - Ø solid material approx. 4 – 25 mm Tool holder HSK 50 Spindle speeds: 1,260 – 15,000 rpm Feed rates/rapid traverses for Z/X/Y axes Infinitely variable: 100 – 10,000/15,000 mm/min Feed drive power: 27 Nm / 1000 daN Spindle drive power: 7 kW Total drive approx. 30 kW – 400 V – 50 Hz Weight approx. 10,000 kg Accessories / Special features: – Ideal machine for complete machining of larger workpieces, die forms, plates, etc. using deep hole drilling Ø 25 x 1,000 deep, milling up to Ø 65, slot milling up to Ø 30, spiral drilling/boring up to Ø 30, countersinking and thread cutting up to M 24 x 3. – SIEMENS 840 D 4-axis CNC path control with process monitoring, etc. – High-frequency drilling spindle by GAMFIOR with infinitely variable spindle speeds. – Pneumatically actuated (200 mm) drill bush holder, swivels in 2 positions. Dcedpfjt Hw Aysx Afqor – Stationary 12-position tool changer by MIKSCH, type CTM 40 with 800 mm stroke for holding twist drills, milling cutters, and tap tools; switching between ELB deep hole drills and standard tools is manual. – Table is stationary for high workpiece weights and accurate drilling. – On the table: FIBRO CNC rotary indexing table type RTN 400 = 420x420 as B axis – For mounting on the table: hydraulic FIBRO rotary indexing table, Ø 1,000 mm, indexing 3 – 144 or angle settings 2.5 – 120° – Large coolant system, approx. 11 kW pump with scraper conveyor and various filters – 2 steady rests for supporting deep hole drill shafts – Complete work area enclosure with lateral and frontal access Condition: very good – a truly rare opportunity, will soon be available for demonstration under power Delivery: ex-stock here Payment: strictly net – upon receipt of invoice We look forward to your order. For further questions, we are at your disposal.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 6207 20.57, teža obdelovanca (maks.): 3.000 kg, največja hitrost vretena: 4.000 obr/min, dolžina mize: 1.675 mm, širina mize: 700 mm, hod vretena: 1.000 mm, TEHNIČNE PODROBNOSTI Hodi premikov in gibanje vretena Premik pinole z: 1.000 mm Vrtalna enota vertikalno: 800 mm Premična stojala v smeri vrtanja w: 1.100 mm Miza in osi Prečni pomik mize x: 1.000 mm Velikost mize: 1.675 x 700 mm Obremenitev mize: 3.000 kg Vreteno in obdelava Vpenjalo orodja: SK40 Hitrost vretena: 100 do 4.000 min⁻¹ Vrtalna zmogljivost jeklo: 32 mm Rezanje navojev: M24 PODROBNOSTI STROJA Priključek: 7,5 kW Dedpfsw Elrvjx Afqocr Dimenzije in teža Teža: 4,8 t Zunanje mere: 3.500 x 6.000 x 2.400 mm Transportne mere brez ohišja: 2.400 x 6.000 x 2.400 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 286, teža obdelovanca (maks.): 2.000 kg, največja hitrost vretena: 3.000 obr/min, hod drsnega ležišča rezkalnega stroja X-os: 650 mm, pomik drsali frezalnika os Y: 300 mm, pomik rezkalne sani Z-os: 600 mm, Kot zasuka osi A (min.): −20 °, zasukni kot osi A (maks.): 20 °, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates the buyer to collect the machine no later than 31.03.2025! Dcjdpfx Aev Iay Usfqer TECHNICAL DETAILS X-axis (transverse): 650 mm Y-axis (vertical): 300 mm Z-axis (drilling axis): 600 mm A-axis (swivel range of drilling axis): ± 20° W-axis (table adjustment): 650 mm Control: Siemens Simatic OP17 Drilling Capacity Maximum drilling depth: 900 mm Drilling diameter with twist drill: 16 mm Drilling diameter with single-lip drill: 4 – 20 mm Thread cutting: M 16 Drill Spindle Spindle taper: MK 2 Spindle speed: 0 – 3,000 rpm Spindle drive (60% duty cycle): 6.0 kW Spindle drive (100% duty cycle): 4.1 kW Workpiece Table Dimensions: 1,100 x 650 mm Swivel range: ± 360 degrees Load capacity: 2,000 kg MACHINE DETAILS Length: 2,620 mm Height: 1,637 mm Table height: 950 mm Width: 1,485 mm Weight: 1,600 kg X-axis (transverse): Ball screw with servo motor Y-axis (vertical): Ball screw with servo motor Z-axis (drilling axis): Rack-and-pinion drive with servo motor W-axis (table adjustment): Ball screw with geared motor

Stanje: rabljeno, Stroj za globoko vrtanje TBT T10-2-500 Dcjdpfx Asxbtznofqor

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1986, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 308-600-1716, globina vrtanja: 600 mm, hitrost vretena (min.): 1.423 obr/min, premer vrtanja: 65 mm, višina središča: 299 mm, TECHNICAL DETAILS Boring Unit Drilling System: BTA + Ejector Speed Steps: 8 or 16 with gear change Feed Range: 0 – 500 mm/min Rapid Traverse, forward/backward: 5,000 mm/min Dcodpfx Afewx E N Ijqor Spindle Mount: DIN 55022, Size 6 Main Drive Three-phase Motor: 37 kW, 1,500 rpm Frequency Control: available Spindle Speeds Range I: 16/180 – 200/230 – 290/330 – 370/430 rpm Range II: 550/620 – 740/800 – 990/1,120 – 1,280/1,450 rpm Feed Drive Servo Motor: 10 Nm, 3,000 rpm Ball Screw: MH 50 × 10 × 14 Coolant System Total Power Requirement: 73 kW Coolant Pump: MSDA 40-R38, SMDA 80-R46 Magnetic Filter Candles: MFK 400 R Liquid Cooler: DKL 7 Magnetic Tube Filter: 54 572 71 104 Immersion Pump: TB 405/390 Centrifuge: Polar U6 MACHINE DETAILS Dimensions and Weight Machine Weight: approx. 6,000 kg Paintwork Color: RAL 6011 EQUIPMENT Clamping fixture with sliding drill bushing Clamping fixture with drill bushing holder Clamping fixture with clamping table Clamping fixture with tailstock center Clamping fixture with centric clamping stock ZS2 (HICO) Force measurement device KIMISIT 0 – 30 Hydraulic power unit HS04-C807-6-0 Chip conveyor SEW RF 430T71D4 Centrifuge Hanning ZG 52x6K.137 Fans Dietz DR 80a 69 Lubrication pump Vogel DM7 Control unit for main and feed drives

Stanje: rabljeno, Leto izdelave: 1993, Sinumerik 805 Control Spindle Speed: 45 – 6000 rpm Full Bore Diameter: / 0 Machine Weight: approx. 20 t Machine Type: Deep Hole Drilling Machine Model / Type: TB 2 15 30001KT Year of Manufacture: 1993 Manufacturer: Loch Machine Serial Number: 221-3000-2093 Machine Weight: approx. 20,000 kg Machine Footprint: Width = approx. 3,800 mm Djdpfx Afovvx Hijqocr Length = approx. 13,500 mm Height = approx. 3,100 mm Drilling Length: approx. 3,500 mm Drilling Capacity: 45 mm (drilling) / 80 mm (counterboring) Spindle Speed Range: 45 – 6,000 rpm Control: Siemens Sinumerik 805 Hamül – Coordinate Table Type: KT 8.5 – 10.10 Clamping Surface: approx. 1,100 mm x 980 mm Travel Y-Axis: approx. 800 mm Travel X-Axis: approx. 500 mm 7 Clamping T-slots: 18 mm Special Equipment: 1 piece Fibroplan NC Rotary Table Type: NC 1.05 Permissible Transport Load (horizontal): 2,500 kg With Forkardt F 630 Manual Chuck The NC rotary table can be adjusted longitudinally and transversely to the fixture table manually and is hydraulically clamped. 1 piece Chip Centrifuge Type: VZ5A by CEPA Drum Capacity: 80 liters Max. Load Weight: 100 kg Drum Diameter: 600 mm Speed: 1,000 rpm 1 piece Auxiliary Pump for Large Drill Diameters 1 piece Bosch Radial Piston Pump No. Suitable for lip drills (internal cooling, chips are conveyed outward) Suitable for BTA drills with screw-on heads (internal cooling, chips are conveyed inward)

Stanje: rabljeno, Leto izdelave: 1990, Core drilling diameter – max. 6 mm Drilling depth 350 mm Swing diameter mm Total power requirement 15 kW Machine weight approx. 3500 kg Space requirements approx. 5000 x 1200 x 2200 mm Dodpet Hw A Tefx Afqocr TECHNICAL DATA: Drilling diameter – solid drilling approx. 1 - 6 mm Drilling diameter – reaming approx. 10 mm Drilling depth 350 mm Centre height over table 170 mm Installation length between quill head and fixed drill steady 500 mm Installation length between tailstock and fixed drill steady 450 mm Quill maximum stroke approx. 450 mm Tailstock quill stroke 40 mm Tailstock traverse on table 450 mm Table size approx. 400 x 680 mm Stepless feed rate 20 - 850 mm/min (!) Rapid traverse approx. 7,000 mm/min Stepless spindle speeds 5,000 - 12,000 - 24,000 rpm (!) Working spindle drive approx. 4 kW * Total drive approx. 15 kW - 380 V - 50 Hz Weight 3,500 kg * Space required approx. 5,000 x 1,200 x 2,200 mm Accessories / Special equipment: The high-frequency drilling spindle is housed in a rectangular quill which executes the drilling feed as well as the rapid retraction. This enables significantly higher feed and rapid traverse speeds, and also makes the travel paths of the drilling tool considerably shorter. Drilling in small diameter ranges is thus far more economical. The HF spindle is a GMN spindle type TSSV 120 S, oil-cooled, controlled via REFU Hydraulic workpiece clamping tailstock, motorized drive approx. 0.8 kW, stroke approx. 40 mm, tailstock quill speed max. 360 rpm, traversable on the table approx. 450 mm in longitudinal direction. Large drilling oil system mounted to the machine with high-pressure pump approx. 100 bar and 5.5 kW output, tank capacity approx. 250 liters with recirculating pump and band filter unit (10 μm fleece), coarse chip collector Control panel with KM pressure display and effective current display, and with digital readout of spindle speed, feed rate, and coolant temperature; potentiometers for stepless spindle speed and feed value input. Drilling depth/travel/return stroke are input electronically via keypad. Plus various fault indicator lights, sequence controlled via SIEMENS S 5-100 U control system. Complete sound-insulated machine enclosure with sliding doors for quick workpiece and tool (collet chuck) change. Various small-diameter drilling tools included.

Stanje: dober (rabljeno), Leto izdelave: 2006, dolžina podajanja os X: 1.650 mm, dolžina pomika po osi Y: 1.000 mm, Deep hole drilling machine Imsa - MF 1200 BBL MACH-ID 9176 Manufacturer: Imsa Model: MF 1200 BBL Control: SELCA S4045 Year of manufacture: 2006 Djdpswyup Tjfx Afqjcr Max. drilling diameter in steel: 5 - 40 mm X-axis travel: 1650 mm Y-axis travel: 1000 mm W-axis travel: 500 mm Table dimensions / L x W or Ø: 1200 x 1500 mm Spindle taper: SK40Mk Spindle speed: 4200 rpm Length: 6500 mm Width: 3800 mm Height: 3400 mm Weight: 6500 kg

Stanje: dober (rabljeno), Leto izdelave: 2008, CNC Deep Hole Drilling Center Machine Type: Degen UTB800/G Control: Heidenhain TNC310 Year of Manufacture: 2008 TECHNICAL SPECIFICATIONS: Travel Paths: X-axis: 630 mm Y-axis: 400 mm Z-axis: 800 mm W-axis: 600 mm Feed Rate: 6,000 mm/min Swivel Range: Z: +/- 10° Table Size: 1,100 x 650 mm Max. Table Load: 2,000 kg Tool Holder: HSK 63 Max. Spindle Speed: 4,000 rpm Drive Power: 7.5 / 5.5 kW Drilling Diameter: 4-25 mm Equipment / Accessories: Electronic Handwheel Djdpfswxaf Rjx Afqjcr High-pressure Pumps Internal Coolant Supply (IKZ): 0-90 bar Coolant Tank: 600 l Paper Belt Filter

Stanje: rabljeno, Stroji za globoko vrtanje TBT T30-3-500 Dcodpoxbtzhefx Afqor

Stanje: dober (rabljeno), globina vrtanja: 1.500 mm, dolžina podajanja os X: 2.000 mm, dolžina pomika po osi Y: 1.300 mm, dolžina podajanja os Z: 1.500 mm, Manufacturer: TBT Tiefbohrtechnik Model: BW 250-S Control: SIEMENS 840D Year of manufacture: 2007 Drilling, milling, and tapping machine for heat exchanger bases and plates Swiveling A-axis: +25° to -15° Filtration and coolant system: 1,000 L Chip conveyor: 2,000 x 1,200 mm – output height Milling tool changer, tower station, 20 positions ELB drilling capacity: 3 – 35 mm Milling capacity: 250 cc/min Feed rates on all axes (X-Y-W-Z): 15,000 mm/min Approx. 15,000 spindle hours Comes with a large tooling package Specifications Metric / US Standard Max. drill diameter (steel): 40 mm Drilling depth: 1,500 mm X-axis travel: 2,000 mm Y-axis travel: 1,300 mm Z-axis travel: 1,500 mm W-axis travel: 750 mm Dedpov A Uw Dofx Afqocr Table load capacity: 15,000 kg Table dimensions (L x W or Ø): 1,600 x 1,200 mm Spindle taper: HSK 63 Mk Spindle power: 11 kW Spindle speed: 8,000 rpm Dimensions (approx.): Length: 7,200 mm Width: 7,800 mm Height: 4,250 mm Weight: 23,000 kg Please note: The information on this page has been provided by us and, where possible, obtained from the manufacturer to the best of our knowledge. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, they do not constitute representations or contractual terms. We recommend verifying all critical details.

Stanje: rabljeno, Stroj za globoko vrtanje SIG BEM8/0.25 Dodpfxoxbtzbs Afqscr