Stroj za vrtanje globokih lukenj

TBT HS 1-350

Core drilling diameter – max. 6 mm
Drilling depth 350 mm
Swing diameter mm
Total power requirement 15 kW
Machine weight approx. 3500 kg
Space requirements approx. 5000 x 1200 x 2200 mm

TECHNICAL DATA:

Drilling diameter – solid drilling approx. 1 - 6 mm
Drilling diameter – reaming approx. 10 mm
Drilling depth 350 mm
Centre height over table 170 mm
Installation length between quill head and fixed drill steady 500 mm
Installation length between tailstock and fixed drill steady 450 mm
Quill maximum stroke approx. 450 mm
Tailstock quill stroke 40 mm
Tailstock traverse on table 450 mm
Table size approx. 400 x 680 mm

Stepless feed rate 20 - 850 mm/min (!)
Rapid traverse approx. 7,000 mm/min

Stepless spindle speeds 5,000 - 12,000 - 24,000 rpm (!)

Working spindle drive approx. 4 kW * Total drive approx. 15 kW - 380 V - 50 Hz
Weight 3,500 kg * Space required approx. 5,000 x 1,200 x 2,200 mm

Accessories / Special equipment:

The high-frequency drilling spindle is housed in a rectangular quill which executes the drilling feed as well as the rapid retraction. This enables significantly higher feed and rapid traverse speeds, and also makes the travel paths of the drilling tool considerably shorter. Drilling in small diameter ranges is thus far more economical.

The HF spindle is a GMN spindle type TSSV 120 S, oil-cooled, controlled via REFU
Hydraulic workpiece clamping tailstock, motorized drive approx. 0.8 kW, stroke approx. 40 mm, tailstock quill speed max. 360 rpm, traversable on the table approx. 450 mm in longitudinal direction.

Large drilling oil system mounted to the machine with high-pressure pump approx. 100 bar and 5.5 kW output, tank capacity approx. 250 liters with recirculating pump and band filter unit (10 μm fleece), coarse chip collector

Control panel with KM pressure display and effective current display, and with digital readout of spindle speed, feed rate, and coolant temperature; potentiometers for stepless spindle speed and feed value input. Drilling depth/travel/return stroke are input electronically via keypad.

Nsdpot Hw A Tsfx Abaeli
Plus various fault indicator lights, sequence controlled via SIEMENS S 5-100 U control system.

Complete sound-insulated machine enclosure with sliding doors for quick workpiece and tool (collet chuck) change.

Various small-diameter drilling tools included.

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.