Stroj Za Graviranje nakup rabljenega (87.067)

Stanje: rabljeno, Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 303211, skupna masa: 52 kg, Kompletni sistem, namizna naprava na podstavku, vključuje primež, pogon vretena preko tihega enosmernega motorja. Naprava je kombinirana s strojnim ogrodjem za sprejem velikih obdelovancev, višinsko nastavljiva, nagibna. Integriran program za graviranje, monitor, tipkovnica, pisava, shranjevanje na disketo. - Leto izdelave 2001 - popolnoma funkcionalna, pod napetostjo, pripravljena za demonstracijo - z navijalno napravo UNICA - Pirografirna naprava IS 200/UNICA z vretenom in transformatorjem - Pirotransformator - Stojalo za rezkarje Dsdpfxexni Spe Ah Iecf - Delovna površina 225 x 80 mm - Z-hod 15 mm (pod vretenom 210 mm) - Motor vretena 20 W - Hitrost vretena 17.000 min⁻¹ - Dimenzije 560 x 575 x 560 mm - Teža 52 kg - Št. stroja 303211

Stanje: rabljeno, Leto izdelave: 2016, Type of Laser: PowerLine F100 Technical Data: Travel Paths of Linear Axes X/Y/Z Axis: 800 / 300 / 300 mm Max. Workpiece Weight: 30 kg Heating, Ventilation, Air Conditioning: Operating Temperature: 25°C +/- 10°C Storage Temperature: 5°C to +40°C Ambient Conditions: non-condensing, non-corrosive, frost-proof Air E-section: 160 m³/h Dcjdpfx Ajxqp Rdsh Ijf Pneumatic Supply: Medium: filtered, non-lubricated compressed air Max. Permissible Operating Pressure: 6 bar Temperature Range: -10° to +60°C Laser Safety Classification: Laser Safety Class 1 according to EN (IEC) 60825-1:2007 Laser Marking Field Size: 120 x 120 mm Operating and Storage Conditions: Load Capacity of the Floor: at least 500 kg/m² Clearance Above: 2 m for ventilation Transport Height: at least 2 m Room Height: at least 2.50 m Electricity: Input Fuse (Protection): 3 x 16 A Nominal Voltage: 400 V (+/- 10%); 3P; N; PE Nominal Frequency: 50/60 Hz; Neutral Conductor loaded Power Consumption: 4 kVA (at 50 Hz) Dimensions and Weight: Width¹): 1.50 m plus swing arm max. 0.8 m (width without monitor) Length¹): 1.80 m plus swing arm 0.5 m (length without monitor) Standing Workstation Height: 1.20 m Working Height: 0.96 m (standing workstation) Required Space and Volume²): Width: 3.00 m Length: 2.50 m Height: 2.20 m (standing workstation) Area: 7.50 m² Approximate Weight: 1500 kg ¹) Width, length, and area of the laser processing machine may vary due to adjustments of the optional swing arm ²) The required area and volume do not include any traffic routes! The operator must define traffic routes around the machine in accordance with national occupational safety regulations. Operating and Storage Conditions: - No direct sunlight - Do not place near radiators - No strong temperature fluctuations - Not in areas with extreme dust exposure - Not in areas with extreme oil, solvent, or cleaning agent vapors

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, TEHNIČNI PODATKI Tip: TSM 15-10-UG Leto izdelave: 2012 Vrsta krmiljenja: NR4000.2.1 IPC PODROBNOSTI O STROJU Naziv izdelka: CNC označevalni stroj OPREMA Navodila za uporabo priložena Dedex Iuhfspfx Ah Iscf

Stanje: dober (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S36-0330, Description For sale is a Trotec Speedy 360 CO₂ laser with 80 W laser power, previously used in professional production. This machine is suitable for engraving and cutting a wide range of materials, including wood, acrylic, plastics, paper, leather, textiles, and similar materials. The working area of 813 × 508 mm enables efficient processing of standard formats as well as serial production with multiple parts per pass. The machine is equipped with InPack-Technology™, which reliably protects guides and optics from dust and dirt. Additionally, the system features an autofocus function for quick and precise adjustment of the focus height. The laser is in well-maintained condition appropriate to its age and is fully operational. The cutting grid and working area show normal, production-related signs of use. The machine has been regularly cleaned and maintained as part of a service contract. Technical Data • Laser source: CO₂ • Laser power: 80 W • Working area: 813 × 508 mm • Focus: Autofocus • Protection system: InPack-Technology™ Scope of Delivery Trotec Speedy 360 CO₂ laser, 80 W Original price: €52,814.00 Dcedpexz Ekhsfx Ah Iof Honeycomb cutting table Inspection / Handover Inspection and powered demonstration available by appointment. Sale from current location. Shipping by arrangement.

Stanje: novo, Leto izdelave: 2024, Workpiece size: 200 x 200 x 200 mm Travel path (X): 110 mm Travel path (Y): 110 mm Laser engraving machine 20 W Anseat Enclosed system with ample interior space to engrave workpieces sized 200 x 200 x 200 mm. Technical Data: - Fiber laser power: 20 W - Wavelength: 1064 nm - Laser source: Raycus - Supported graphic formats: PLT, BMP, JPG, PNG, TIP, PCX, TGA, ICO, DXF - Pulse frequency: 20 – 100 kHz - Power consumption: < 800 W - Cooling: Air - Voltage: single-phase, 230 V +/- 10% - Engraving area: 110 x 110 mm Dcodpfswgn D Dox Ah Ief - Minimum line width: 50 μm - Smallest character: 0.3 mm - Focusing aid with 2 LED pointers

Stanje: rabljeno, Leto izdelave: 1994, x-axis travel: 0 mm y-axis travel: 0 mm z-axis travel: mm Total power requirement: kW Machine weight approx.: t Djdpet Hw Dqsfx Ah Iscf Space requirement approx.: m Marking machine with rotary table (bevel gears), 4 axes, PV 70 head with WINGRAED and WINSMAT software

Stanje: novo, Leto izdelave: 2024, številka stroja/vozila: BN120XT-HA-X,

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: JEWELliner XS30-PRO Std, vhodna napetost: 230 V, vrsta vhodnega toka: Klimatska naprava, laserska moč: 30 W, vrsta hlajenja: zrak, skupna širina: 400 mm, skupna višina: 500 mm, skupna dolžina: 600 mm, skupna masa: 55 kg, trajanje garancije: 12 meseci, vrsta nastavitve višine: električni, širina odprtine vrat: 400 mm, višina odprtine vrat: 200 mm, valovna dolžina laserja: 1.064 nm, Developed, manufactured, and tested in Germany. JEWELliner "XS-PRO" Standard model available with 30W CW includes: An electric lift door, auto-focus functionality, and a compact machine footprint, allowing the device to fit in various workspaces. - Developed and manufactured in Germany - Further models, power ratings, and options available upon request. Engraving laser – marking laser – laser with "Laser Class 1" safety enclosure. Our JEWELliner "XS-PRO" Standard model marking laser is designed for engraving and marking all metals, selected plastics, and ceramics. The machine dimensions are L60 x W40 x H50 cm, allowing for space-saving integration into production environments. Applications: Jewelry, metalworking, and advertising industries Sample materials: Steel, stainless steel, gold, silver, titanium, aluminum, brass, copper, bronze, carbon fiber, ceramic, and Makrolon (polycarbonate). Application possibilities: - Graphic engraving (logos, drawings, sketches) - Photo engraving - Barcode (linear, Data Matrix, QR code) - Serial number marking - Inside ring engraving (e.g., name, date, symbol, script) optional - Outside ring engraving (e.g., name, continuous graphic/pattern) optional - Bangle (bracelet) inside and/or outside engraving – optional - Text engraving (straight text, circular text, arc text, text symbols) - Handwriting engraving - Fingerprint engraving - Micro engraving (micro text down to min. 0.25 mm character size) - Rotary engraving (markings on round or curved surfaces) optional Compact construction, all components are integrated in the housing and adequately air-cooled! The machine is maintenance-free! Standard equipment JEWELliner "XS" PRO (BN30XS-HRA): - Fiber laser unit with beam deflection head and focusing module - Laser Class 1 safety housing with 200x140 mm protective viewing window - Automatic door opening - Emergency stop switch - 180° view of marking area within the enclosure - Z-axis with electrically operated auto-focus Djdpfsc Rmy Nox Ah Iscf - Includes BNMARK5 marking software! Made in Germany! Developed by BN Laser - Optional: rotary axis with removable jewelry chuck Technical specifications / data: Laser type: Fiber laser Output power CW: 30W Available frequency range: 22,000 - 820,000 Hz Connection: USB 2.0 Wavelength: 1064nm Lens (standard): F-Theta 163 Marking field size: 110 x 110 mm – smaller available upon request Focus depth: approx. 1.7 mm Min. character height: 0.25 mm Min. line width: 0.023 mm Cooling: Air-cooled Maintenance: Maintenance-free Power supply: AC 110V/240V – 50/60Hz, short-circuit protected Dimensions: L600 x W400 x H500 mm Weight: approx. 55 kg The marking laser is ready for operation upon delivery and can be quickly integrated into your production environment. We are happy to produce engraving samples for you as well. Images may differ from actual product.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: JEWELliner "XS" PRO Modell "Premium", vrsta vhodnega toka: Klimatska naprava, laserska moč: 30 W, skupna širina: 400 mm, skupna višina: 500 mm, skupna dolžina: 600 mm, skupna masa: 55 kg, trajanje garancije: 12 meseci, vrsta nastavitve višine: električni, širina odprtine vrat: 400 mm, višina odprtine vrat: 200 mm, valovna dolžina laserja: 1.064 nm, Developed, manufactured, and tested in Germany. JEWELliner "XS" model "Premium" available with 30W CW and camera - Electric lift door – auto-focus – compact machine size - - Developed and manufactured in Germany - Further models, power ratings, and options available on request. Engraving laser – marking laser – laser marker with "Laser Class 1" protective enclosure. Our JEWELliner "XS-PRO" model "Premium" marking laser is suitable for marking and engraving all metals, select plastics, and ceramics. The machine dimensions are L60 x W40 x H50 cm, allowing for space-saving integration into production environments. Applications: Jewelry, metal, and advertising industries. Material examples: Steel, stainless steel, gold, silver, titanium, aluminum, brass, copper, bronze, carbon, ceramics, Makrolon. Application possibilities: - Graphic engraving (logo, drawing, hand-drawing) - Photo engraving - Barcode (bar code, Data Matrix, QR code) - Serial number marking - Inner ring engraving (e.g., name, date, symbol, handwritten)—optional - Outer ring engraving (e.g., name, continuous graphic, continuous pattern)—optional - Bangle engraving inside and/or outside—optional - Text engraving (straight text, circle text, text arc, text symbols) - Handwriting engraving - Fingerprint engraving - Micro engraving (microtext down to min. 0.25 mm character height) - Rotary engraving (marking on round or curved surfaces)—optional Compact construction, all components integrated in the housing and efficiently air-cooled! The machine is maintenance-free! Standard equipment JEWELliner "XS" PRO (BN30XS-HRA): - Fiber laser unit with deflection head and focus module - Laser Class 1 safety housing with 200x140 mm viewing window - Automatic door opening - Emergency stop switch - 180° view of the marking area within the housing - Z-axis with auto-focus – motorized - Rotary axis with removable jewelry chuck - Incl. marking software (final configured) - High-resolution industrial camera USB 3.1 Technical specifications / data: Laser type: fiber laser Output power CW: 30W Available frequency range: 1.8 - 2,000kHz Connection type: USB 2.0 Wavelength: 1064nm Lens (delivered): F-Theta 163 Marking field size: 110 x 110 mm (smaller sizes available) Focusing range: approx. 1.7 mm Dodpjppxmkofx Ah Ijcf Min. character height: 0.25 mm Min. line width: 0.023 mm Cooling: air-cooled Maintenance: maintenance-free Power supply: AC 110V/240V – 50/60Hz, short-circuit proof Dimensions: L600 x W400 x H500 mm Weight: approx. 55 kg The marking laser is ready for operation immediately after delivery and can be quickly integrated into your own production process. We are also happy to produce engraving samples for you. Images and illustrations may differ.

Stanje: novo, Leto izdelave: 2024, številka stroja/vozila: BN20XS "Standard", dolžina gredi: 1.064 mm, teža obdelovanca (maks.): 5 kg, vhodna napetost: 230 V, vrsta vhodnega toka: Klimatska naprava, laserska moč: 20 W, vrsta hlajenja: zrak, skupna širina: 400 mm, skupna višina: 500 mm, skupna dolžina: 600 mm, delovno območje: 70 mm, skupna masa: 30 kg, trajanje garancije: 12 meseci, vrsta nastavitve višine: električni, maks. debelina aluminijaste pločevine: 3 mm, širina odprtine vrat: 400 mm, višina odprtine vrat: 350 mm, pomik po osi Z: 100 mm, JEWELliner "XS2" model: "Standard" with 20W CW laser power. - Developed and manufactured in Germany (proven) - Other models, laser powers, and options available on request. Engraving laser – marking laser – laser marking system with “Laser Class 1” protective housing. Our JEWELliner "XS2" marking laser is suitable for marking and engraving all metals, selected plastics, and ceramics. The compact housing size of L50 x W40 x H50 cm allows for space-saving integration into production environments. Applications: Jewelry, metal, and advertising industries Sample materials: Steel, stainless steel, gold, silver, titanium, aluminum, brass, copper, bronze, carbon, ceramics, Makrolon Application possibilities: - Graphic engraving (logos, drawings, hand sketches) - Photo engraving - Barcode (barcode, data matrix, QR code) - Serial number marking - Optional: inner ring engraving (e.g. name, date, symbol, handwriting) - Optional: outer ring engraving (e.g. name, continuous graphic, continuous pattern) - Optional: bangle engraving (inside and/or outside) - Text engraving (straight text, circular text, arched text, text symbols) - Handwriting engraving Dcedpfjppxlmjx Ah Ief - Fingerprint engraving - Micro-engraving (micro text, minimum font size 0.15 mm) - Optional: rotary engraving (marking on round or curved surfaces) Compact design—all components are installed in the housing and sufficiently air-cooled! The machine is maintenance-free! Standard equipment JEWELliner "XS2" (BN20XS2-HR): - Fibre laser unit with deflection head and focus module - Laser Class 1 protective housing with 140 x 100 mm protective viewing window - Manual door opening - Emergency stop switch - 180° field of view of the marking area inside the housing - Electrically adjustable Z-axis - Includes marking software (configurable) - Rotary axis included Technical specifications/data: Laser type: fibre laser CW output power: 20W Available frequency range: 28-64kHz Connection type: USB 2.0 Wavelength: 1064nm Standard lens: F-Theta 163 Marking field size: 70 x 70 mm (smaller sizes possible) Focal range: approx. 1.0 mm Minimum character height: 0.15 mm Minimum line width: 0.020 mm Cooling: air-cooled Maintenance: maintenance-free Power supply: AC 110V/240V – 50/60Hz, short-circuit proof Dimensions: L500 x W400 x H500 mm Weight: approx. 30kg The marking laser is ready for operation immediately after delivery and can be quickly integrated into your production process. Sample engravings can be produced on request. Images and illustrations may vary!

Stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, skupna širina: 700 mm, skupna višina: 1.100 mm, skupna dolžina: 900 mm, skupna masa: 70 kg, dolžina mize: 400 mm, širina mize: 150 mm, Brez izklicne cene – zagotovljena prodaja najvišjemu ponudniku! Stroj se prodaja na dražbi zaradi likvidacije podjetja. Oddaja ponudbe pomeni obveznost pravočasnega prevzema med 26.01.2026 in 29.01.2026! TEHNIČNI PODATKI Dimenzije mize: 400 mm x 150 mm Dsdpfx Ahsxqcarj Ijcf PODATKI O STROJU Mere (D x Š x V): 900 mm x 700 mm x 1.100 mm Teža: 70 kg

Leto izdelave: 1985, stanje: rabljeno, 1 used engraving machine Manufacturer: KUHLMANN Model: GM I-I Working area: 320 x 200 x 280 mm Template table: 500 x 400 mm Work table: 500 x 200 mm 3D form engraving device TGV disc engraving device Various templates and type sets Dodpfjk Tt Axox Ah Iecf Various engraving cutters Speed range: 4,200 – 20,000 rpm Required space: approx. 1.2 x 1 x 1.5 m Weight: approx. 250 kg

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: FI-50-RAY-OF, dolžina gredi: 200 mm, vhodna napetost: 230 V, vrsta vhodnega toka: Enosmerni tok, laserska moč: 50 W, vrsta hlajenja: zrak, delovno območje: 200 mm, skupna masa: 46 kg, trajanje garancije: 36 meseci, vhodna frekvenca: 100 Hz, Available for immediate delivery! Buy now and save! Take advantage of this opportunity and secure the 50 Watt Raycus QB. For further information or a personalised offer, we are happy to assist you. Contact us today to learn more about the benefits of this outstanding product. Dsdpfou Hrf Dex Ah Ijcf We offer you a brand-new 50 watt Raycus fiber laser with German user software and operating instructions. This unit is extremely easy to use and ready for operation immediately, even without programming knowledge. Our services: • Personal delivery and installation • Setup and instruction on site or via remote connection • Ongoing support for any questions or issues • Service and spare parts supplied directly from Germany Technical details: • Laser power: 50 Watt Raycus • Wavelength: 1064 nm • Marking field size: 200x200 mm (Options: 50, 70, 110, 150, 250, 300 mm head) • Repeatability: ± 0.003 mm • Engraving speed: ≤ 7000 mm/s • Marking software: EZCAD in German / English • Pilot laser: easy preview • Laser class: 4 • Operating temperature range: 14-30 ℃ • Focussing: manual • Max. workpiece height: approx. 350 mm • Connection: 230V • Cooling: air-cooled • Weight: approx. 50 kg • Operating costs: low • Service life: over 100,000 maintenance-free operating hours • Features: matrix bore holes for fixtures • Wide range of materials: marks various materials Included: • 200x200 mm head, other sizes available • EC Declaration of Conformity • Warranty • Service • German software • Training for machine and software • Invoice Scope of delivery: • USB cable • Power cable • Stops • USB stick with parameters • Operating manual in German • Monitor mount • Foot pedal • Safety glasses Applications: Perfectly suited for texts, logos, vector graphics, QR codes, DMC codes, 2D codes, variable data sets, and image engraving. This laser is ideal for engraving and annealing metals, as well as marking or decorating plastics and coated materials. Software: • EZCad 2.14.0 in German • Compatible files: *.DXF, *.PLT, *.AI, *.JPC, *.BMP, *.JPG, *.JPEG, *.GIF, *.TGA, *.PNG Service: Service is provided directly by us, and we maintain the largest spare parts stock here in Germany to ensure fast and efficient support. Shipping and installation: With shipping, we connect the machine via remote connection, set it up, and provide a brief introduction. Alternatively, we offer personal delivery, installation, setup, and instruction. The price is agreed upon based on your postcode. Consulting: For detailed advice, please visit our website or contact us directly by phone. We are happy to answer all your questions.

Stanje: novo, Leto izdelave: 2025, obratovalne ure: 3 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: FI-30-MAX-OF, dolžina gredi: 110 mm, vhodna napetost: 230 V, vrsta vhodnega toka: Enosmerni tok, laserska moč: 30 W, vrsta hlajenja: zrak, delovno območje: 110 mm, skupna masa: 46 kg, trajanje garancije: 36 meseci, vhodna frekvenca: 100 Hz, Immediately available! Demonstration unit! Buy now and benefit! Take advantage of this opportunity and secure the 50-watt demonstration unit—used for a maximum of 3 hours, in like-new condition! For more information or a personalized quote, we are at your service. Contact us today to learn more about the benefits of this outstanding product. We offer a 30-watt fiber laser with German user software and operating manual. This machine is very easy to use without any programming knowledge and is ready for immediate operation. ✅ Only up to 3 hours of use – excellent condition! ✅ 3 years warranty and support included! Our services: - Personal delivery and installation - On-site setup and instruction or via remote connection - Ongoing support for questions or issues - Service and spare parts supplied directly from Germany Technical details: - Laser power: 30 watts - Wavelength: 1064 nm - Marking area size: 200x200 mm (options: 50, 70, 110, 150, 250, 300 mm head) - Repetition accuracy: ± 0.003 mm - Engraving speed: ≤ 7000 mm/s - Marking software: EZCAD in German/English - Pilot laser: easy preview - Laser class: 4 - Operating temperature range: 14-30°C - Focusing: manual - Max. part height: approx. 350 mm - Connection: 230V - Cooling: air-cooled - Weight: approx. 50 kg - Operating costs: low - Service life: over 100,000 maintenance-free operating hours - Features: grid drilling for fixtures Dcodpswchywjfx Ah Ijf - Wide range of materials: suitable for marking various materials Included: - 200x200 mm head, other sizes available - CE declaration of conformity - 3 years warranty and support - German language software - Training for machine and software - Invoice Scope of delivery: - USB cable - Power cable - Stops - USB stick with parameters - Operating manual in German - Monitor holder - Foot pedal - Safety goggles Applications: Ideally suited for texts, logos, vector data, QR codes, DMC codes, 2D codes, variable data sets, and image engraving. This laser is perfect for engraving and annealing metals as well as marking or decorating plastics and coated materials. Software: - EZCad 2.14.0 in German - Compatible file types: *.DXF, *.PLT, *.AI, *.JPC, *.BMP, *.JPG, *.JPEG, *.GIF, *.TGA, *.PNG Service: Service is provided in-house, with the largest spare parts inventory available directly from Germany to ensure fast and efficient support. Shipping and installation: With shipping, we connect the machine via remote link, set it up, and provide a brief introduction. Alternatively, we will deliver personally, install, set up, and instruct you. Pricing is determined based on postal code. Consultation: For comprehensive advice, please visit our website or call us directly. We are happy to answer any questions you may have.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, laserska moč: 30 W, vrsta hlajenja: zrak, skupna širina: 60 mm, skupna višina: 1.660 mm, skupna dolžina: 80 mm, skupna masa: 80 kg, The universally applicable LAS 28 laser marking system from Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. With the integrated fiber laser, you can mark almost any material, such as steel, hard metal, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. For permanent marking, laser usage is essential in many industries. The powerful laser software enables you to easily create texts, numbers, 2D codes, QR codes, and logos with just a few clicks—no extensive programming knowledge needed. Serial and article numbers are automatically incremented by the software after initial setup. Additionally, the software can read data (such as part numbers, project names, etc.) from existing tables and transfer them automatically to predefined fields. The use of a hand scanner is also supported. Dcedpfx Asunh Hreh Ief Standard equipment includes a laptop with a mounting bracket and Windows operating system. Optionally, the LAS 28 can be fitted with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extensions for marking long parts, are also available. Made in Germany • Fiber laser 30W (optional 20 or 50 watts) • Wavelength 1064nm • Marking field size: 150x150mm (optional: 200x200mm) • Optional: rotary axis (3-jaw chuck) • Optional: digital height measuring system • Optional: extraction system (incl. activated carbon filter) • Optional: autofocus system – automatic focus distance determination • Signal lamp for operating status indication • EZCAD marking software (optional additional laser software) • Pilot laser (easy preview, contour preview) • Focus finder (easy focus adjustment) • Max. component height approx. 270mm • Electrically adjustable Z-axis (working level adjustment) • Frame made of aluminum profile • 230V power connection • Air-cooled • Laptop with Windows OS • Dimensions: 800x600x1660mm (LxWxH) • Weight: approx. 80 kg

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, 1 rabljena: Univerzalni pantografski gravirni stroj • Model: Fridrich Deckel GK 12 • Namen uporabe: Fina graviranja, kopirno rezkanje, modelarska dela • Delovno območje (obdelovanec): pribl. 200 x 350 mm • Območje kopirne predloge: pribl. 320 x 450 mm • Povečava/pomanjšava: 1:1,5 do 1:10 • Leto izdelave: neznano • Motor vretena: pribl. 250W Dcedpfx Aoxa Ap Eoh Isf • Hitrost vretena: Več stopenj, prilagodljiva • Stanje: Rabljeno, preizkušeno, popolnoma delujoče

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Micro 3D L570V, potovalna razdalja osi X: 700 mm, pomik osi Y: 600 mm, pomik po osi Z: 500 mm, hitri pomik na osi Z: 30 m/min, hitro pomikanje X-os: 30 m/min, hitri pomik os Y: 30 m/min, premer vrtljive mize: 500 mm, obremenitev mize: 300 kg, Opis Splošni podatki Micro 3D L570V je 5-osni stroj za lasersko obdelavo tekstur na kalupih. - Sposobnost za obdelavo kovinskega brušenja, 3D teksture, fine teksture, teksture usnja, mikrostrukture itd. - Natančnost laserske teksture do 0,01 mm - Poenostavite svoj proces in dosezite neskončno ponovljivost Djdjvfmbtjpfx Ah Iscf Pomiki Pomik po X osi: 700 mm Pomik po Y osi: 600 mm Pomik po Z osi: 500 mm Območje vrtenja A: +110 / -110 ° Obratljivost C: 360 ° Delovna miza: Premer mize: 500 mm Obdelovalni premer (5 osi): max. 600 mm Obdelovalna višina (5 osi): max. 350 mm Teža obdelovanca (5 osi): 300 kg Laserji Nanosekundni (opcijsko): ≥ 50W Femtosekundni (opcijsko): ≥ 20W

Stanje: delavnici obnovljeno (rabljeno), Mortising machine, oscillating chisel mortiser MAKA Type DB 5 including numerous mortising tools – see photos Workpiece stop: 2 pcs Stop rail left/right: 2150 mm Workpiece blow-out: 2x Foot switch Dcodsv Hm Nmepfx Ah Isf Pneumatic workpiece clamping, lateral: 1 pc Pneumatic workpiece clamping, from above: 2 pcs Extraction connection: D 120 mm Weight approx. 550 kg Dimensions approx. L x W x H = 1200 mm x 800 mm x 1500 mm (without stop rails) Note on used machines: • Technical specifications are subject to errors and prior sale. • Stated prices are ex location, free loading! • The machines have been cleaned and function tested. • All machines are purchased as inspected, with no claim to warranty whatsoever. Buyers are welcome to inspect the machines at our site. • Special agreements are only valid if made in writing. (Inquiries will only be answered with your address and phone number!)

Stanje: dober (rabljeno), Leto izdelave: 1969, Work Table Clamping Surface 500 x 200 mm Distance Spindle – Table 300 mm Longitudinal Manual Travel 300 mm Cross Manual Travel 160 mm Template Table Template Table Dimensions 550 x 324 mm Distance Pantograph Arm – Clamping Surface 20 mm Swiveling 360° Template Grooves 7 pcs, 45 mm apart Milling Spindle Spindle Speeds 1,900 – 15,000 rpm Cutting Speed 1 – 226 m/min Motor Speed 2,800 rpm Spindle Taper (engraving spindle) 1:5 Max. Collet Bore 6 mm Spindle Adjustment 1 mm fine, 3 mm coarse Pantograph Transmission Ratio 1 : 1 to 1 : 50 Drive Power 0.2 kW Dimensions Space Requirement (L x W x H) 1400 x 1000 x 1420 mm Dcjdpfxjidckfe Ah Iof Weight 260 kg Accessories / Special Features: • 1 set of fonts with letters and numbers • Tracing stylus

Leto izdelave: 2001, stanje: rabljeno, Tehnični podatki: x-hod: 400 mm y-hod: 300 mm z-hod: 500 mm Vpenjalna površina mize: 400 x 300 mm Obremenitev mize: 50 kg Krmiljenje – polavtomatsko: LASERSOFT 3D Moč laserja: 100 W Skupna potreba po moči: 27 kVA Teža stroja pribl.: 2,5 t Potreben prostor pribl.: 3 x 3,5 x 2,8 m Dedpfx Aeikbtnoh Iecf CNC gravirni/označevalni/konturni laserski stroj Pribl. 9.000 vklopnih ur, pribl. 5.500 delovnih ur

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Machine used in a fish processing plant, previously used for washing squid. In very good condition, like new. Dedpfx Ajv T Rlloh Iscf

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, obratovalne ure: 23.291 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.200 mm, pomik osi Y: 1.400 mm, pomik po osi Z: 750 mm, dolžina mize: 3.200 mm, širina mize: 1.400 mm, TEHNIČNI PODATKI Pomik X-os: 3.200 mm Pomik Y-os: 1.400 mm Dcedpfx Aeyvub Ush Ijf Pomik Z-os: 750 mm Velikost mize: 3.200 x 1.400 mm PODROBNOSTI STROJA Vrsta krmiljenja: CNC Krmilni sistem: Heidenhain Obratovalne ure Obratovalni čas vretena: 23.291 h Delovni čas programa: 27.807 h Čas vklopa krmiljenja: 83.301 h Čas vklopa stroja: 73.907 h

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1999, številka stroja/vozila: 810, najv. debelina pločevine: 4 mm, skupna masa: 550 kg, delovna dolžina: 200 mm, TEHNIČNI PODATKI Debelina pločevine: 4 mm Dolžina pločevine: 200 mm PODATKI O STROJU Dcedpfx Aheywg Nme Isf Skupna potrebna moč: 3 kW Dimenzije in teža Potreben prostor: pribl. 1,0 x 0,8 x 1,0 m Teža stroja: pribl. 550 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, premer kolesa: 400 mm, skupna masa: 4.000 kg, razdalja med središči: 550 mm, največja hitrost vretena: 3.000 obr/min, model krmilnika: Siemens 840 D, TEHNIČNE PODROBNOSTI Maksimalni premer kolesa: 400 mm Premer obdelovanca: 36-400 mm Razdalja med osmi: 135-290 mm Maks. hitrost vretena (brezstopenjsko nastavljiva): 3.000 min⁻¹ Razdalja med konicama: 100-550 mm PODROBNOSTI STROJA Krmiljenje: CNC Siemens 840 D Dimenzije in teža Prostorske zahteve: pribl. 2.000 x 3.055 x 2.788 mm Teža stroja: pribl. 4.000 kg OPREMA Enostranska valjna preizkušnja Dvostranska valjna preizkušnja Preizkušnja vibracij Heli preizkus pri dvostranskem stiku Uporaba do 6 preizkusnih sani Dedpfoywg Hxox Ah Iscf Najvišja natančnost preizkušanja in ponovljivost Strojna miza s pogonom obdelovanca Zasukljiva pnevmatska enota Pršenje maziva (tip: Vogel) Izvleček oljne megle (tip: Elbaron)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, premer kolesa: 275 mm, širina kolesa: 150 mm, potovalna razdalja osi X: 640 mm, pomik osi Y: 870 mm, premer obdelovanca (maks.): 275 mm, TECHNICAL DETAILS Wheel diameter: 275 mm Wheel width: 150 mm Max. module: 6 Min. module: 1.5 Workpiece diameter: 275 mm Max. gear width: 5.5 mm Spiral angle: 0 - 60° Number of teeth: 5 - 120 Min. transmission ratio: 1:1 Max. transmission ratio: 1:10 Milling Depth Axis (X Axis) Travel: -25 to 640 mm Max. travel speed: 6 m/min Workpiece Positioning Axis (Y Axis) Travel: 870 mm Max. travel speed: 4.5 m/min Axis Offset (Z Axis) Travel range: +/- 50 mm Max. travel speed: 0.657 m/min Generating Rotation Axis (A Axis) Swivel range: 315° Max. swivel speed: 40°/s Workpiece Spindle (B Axis) Max. workpiece spindle speed: 300 rpm Outer taper (1:4) acceptance diameter: 140 mm Inner taper (1:20): 99.218 mm Workpiece spindle bore: 90 mm Workpiece Swivel Axis (C Axis) Swivel range: -8.5 to 98° Max. swivel speed: 21.5°/s Tool Spindle (D Axis) Tool spindle speed: 60 to 350 rpm Tool Positioning Axis (E Axis) Swivel range: 0 to 360° Max. swivel speed: 19.5°/s Machine Distance (V Axis) Travel: 150 mm Max. travel speed: 1.6 m/min MACHINE DETAILS Cutter Drive Motor Power: 20 kW Workpiece Drive Djdpfxsywgy Sj Ah Iocf Power: 14.5 kW Total connected load: 62 kVA Dimensions & Weight Machine weight: approx. 12 t Space requirement: approx. 4,700 x 4,387 x 2,450 mm EQUIPMENT 13 cutters