Stanje: dober (rabljeno), Rahmen: 2750*1100 mm 8400*1100*100 mm 5900*1100*100 mm Traversen: 1800*80 mm 2800 kg/Fach 3600*130 mm 2400 kg/Fach 2700*100 mm 2400 kg/Fach Benötigen Sie Regale oder Zubehör in anderen Zusammenstellungen oder Ausführungen, sprechen Sie uns bitte an. Folhod Duc Teccqmepg Wir bieten ein umfassendes Programm an neuen und gebrauchten Regalen sowie Zubehör und unterstützen Sie gerne bei Ihrer Planung. Weiteres Zubehör wie zum Beispiel: Rahmen,- Eck,- und Anfahrschutz, Durchschubsicherungen, Spanplatten, Gitterroste, Rückwandgitter, Tiefenstege lieferbar. Versand: Bitte fragen Sie unter Angabe Ihrer PLZ und Ortsangabe, sowie der gewünschten Artikelmenge die Frachtkosten an. Weitere Serviceangebote: Planung, Regalmontage/demontage, Ankauf/Verkauf Aenderungen und Irrtuemer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten!

Stanje: dober (rabljeno), Okvir: 7800*1100*100 mm Prečke: 3600*130 mm 3600*150 mm Če potrebujete regale ali dodatno opremo v drugih konfiguracijah ali izvedbah, nas prosimo kontaktirajte. Ponujamo celovit program novih in rabljenih regalov ter dodatne opreme in vam z veseljem pomagamo pri načrtovanju. Na voljo je tudi dodatna oprema, kot na primer: zaščite okvirjev, vogalnika in naletne zaščite, zaščita proti potiskanju, iverne plošče, rešetkaste police, zadnje mreže, prečne nosilce. Dostava: Za stroške dostave nas povprašajte z navedbo vaše poštne številke, kraja in želene količine artiklov. Dodatne storitve: Fjlhcet N Itbecqmepg Načrtovanje, montaža/demontaža regalov, odkup/prodaja Pridržujemo si pravico do sprememb in napak v tehničnih podatkih, informacijah in cenah ter vmesne prodaje!

Stanje: rabljeno, Nosilnost: 3200 kg/polica Prečke: 3600*140*50 mm 2700*125*50 mm Nosilnost na paleto: 800 kg Okviri: 8500*1100*100 mm 7900*1100*120 mm Če potrebujete regale ali dodatke v drugih konfiguracijah ali izvedbah, nas prosim kontaktirajte. Ponujamo širok program novih in rabljenih regalov ter dodatne opreme ter vam z veseljem pomagamo pri načrtovanju. Dodatna oprema na voljo: Zaščita okvirjev, kotna in naletna zaščita, proti-potisna varovala, iverne plošče, mrežaste police, zadnje mreže, globinske prečke. Dostava: Za izračun stroškov pošiljke nam, prosim, sporočite vašo poštno številko, lokacijo ter želeno količino artiklov. Dodatne storitve: Načrtovanje, montaža/demontaža regalov, odkup/prodaja Fjlog Tmvhshccqmjpg Pridržujemo si pravico do sprememb in napak v tehničnih podatkih, informacijah in cenah ter vmesne prodaje!

Stanje: dober (rabljeno), V prodaji samo prečke: Meta 2700*100 mm 2400 kg/polica 10 EUR/kos HLF 3300*140 mm 3200 kg/polica 12 EUR/kos Hilo (novi tip) 3100*100 mm 2000 kg/polica 11 EUR/kos Dexion P90 3600*100 mm 1400 kg/polica Dexion P90 Silverline 2700*125 mm 2400 kg/polica Če potrebujete regale ali dodatke v drugih sestavah ali izvedbah, nas prosim kontaktirajte. Nudimo celovit program novih in rabljenih regalov ter dodatkov, z veseljem pa vam pomagamo tudi pri načrtovanju. Dodatna oprema na voljo, kot na primer: Okviri, kotni zaščitni profili, zaščita proti naletu, zaščitne rešetke, iverne plošče, mrežaste police, zadnje mreže, prečne povezave. Dostava: Za informativni izračun stroškov dostave navedite vašo poštno številko, kraj ter želeno količino artiklov. Dodatne storitve: Načrtovanje, montaža/demontaža regalov, odkup/prodaja Pridržujemo si pravico do sprememb in napak v tehničnih podatkih, podatkih, cenah ter vmesne prodaje! Fpelhccqoq Tpk Iomeg

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: EAN0729389556525, skupna dolžina: 137.000 mm, višina police: 5.000 mm, število vrst polic: 10, prosta razpetina: 3.300 mm, višina okvirja: 5.000 mm, širina okvirja: 1.100 mm, obremenitev na par nosilcev (maks.): 3.250 kg, dolžina police: 137.000 mm, dolžina opore: 3.300 mm, 2 enojne vrste paletnih regalov + 4 dvojne vrste paletnih regalov vsak 13,7 m dolg, 5 m visok, 1,1 m globok, vsaka 4 polja, širina polja 3,3 m, vsaka 3 nivoji prečk, nosilnost na prostor 3250 kg. - 50 okvirjev (RM5011 - RAL5019) vključno s talnimi ploščami, podložnim materialom in vijaki - 40 distančnikov/povezovalnikov za dvojne vrste (ZAbh20) - 200 talnih sider (ZZBA1210) - 240 posameznih prečk (T33135 - RAL2008) - 10 zaščit proti trku/odbojem (ZRS40901) - 10 tabel z nosilnostjo (BSMcP) Fjlhcoyzl T Eecqmspg Okvirji so privijačeni, ne predmontirani Prevoz/dostava: - največ 20 delovnih dni po prejemu plačila - dostava brezplačno na gradbišče/mesto montaže - razklad s tovornjaka izvede kupec z lastno dvižno napravo - dostava po celotnem delu Zvezne republike Nemčije, razen otokov! - Dostave v države EU po individualnem dogovoru.

Stanje: novo, Leto izdelave: 2026, številka stroja/vozila: EAN0729389556525, dolžina opore: 3.600 mm, dolžina police: 11.200 mm, višina okvirja: 4.500 mm, obremenitev na par nosilcev (maks.): 3.000 kg, širina okvirja: 1.100 mm, število vrst polic: 1, 1 vrstna paletnih regalov (M45113615-3) Dolžina 11,2 m, višina 4,5 m, globina 1,1 m, 3 polja, širina 3,6 m, Vsako polje ima 3 nivoje prečk, nosilnost polja 3000 kg. Fjlhccqev Urchsmspg - 4 okvirji (RM4511 – RAL5019) - 8 talnih plošč, podložni material, pritrditveni material - 16 talnih sider (ZZBA1210) - 18 posameznih prečk (T3615 – RAL2008) - 1 oznaka nosilnosti (BSMcP) Okvirji so vijačeni, niso predmontirani Prevoz / dostava: - največ 20 delovnih dni po prejemu plačila - dostava do gradbišča / mesta montaže - razklad s tovornjaka opravi kupec z lastno dvižno opremo - dobava po celotni Nemčiji, razen otokov; dobava v države EU po individualnem dogovoru.

Stanje: dober (rabljeno), dolžina opore: 2.700 mm, obremenitev na par nosilcev (maks.): 3.000 kg, Sporočite nam, koliko posameznih kosov potrebujete: Fslhcoy Rglzscqmjpg - Stebri - Prečke - Vstavna rešetka

Stanje: rabljeno, Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, nosilnost na odsek shranjevanja: 1.500 kg, skupna dolžina: 2.700 mm, skupna višina: 100 mm, skupna širina: 50 mm, Paletni regal / regal za težke tovore / prečka L=270 od HLF Heiss Fpelhccqsy H Ew Ismeg Prodajajo se samo prečke Rabljeno blago, ODLIČNO stanje, glej slike Dobavitelj: HLF Heiss Količina: 200 kosov Dolžina prečke: 270 cm Višina prečke: 10 cm / širina: 5 cm Nosilnost na polico: 1.500 kg Barva: oranžna Vključeno z varovali za obešanje Letnik izdelave: 2017 Blago na zalogi v Wilfersdorfu pri Mistelbachu/Spodnja Avstrija. Prevoz možen po dogovoru. Ogled možen kadarkoli po predhodnem dogovoru.

Stanje: skoraj kot novo (rabljeno), Navpično regal za palice za težke obremenitve, dolžina 5 m / z nastavljivimi vmesnimi pregradami. Fslhcsy I S S Ujcqmspg

Stanje: rabljeno, Nedcon paletový regal pribl. 3,1 tm, rabljen 🧰 Lastnosti izdelka • Proizvajalec: Nedcon • Barva: modra Fpelhccqjy D Nybemeg • Stanje: rabljen, glej slike • Okvirji: 2 kosa predmontirana 500 x 105 cm • Širina okvirja: 10 cm • Prečke: 8 kosov s svetlo širino 290 cm • Varovanje: 16 kosov pocinkanih varnostnih zatičev • Pritrditev: 8 kosov Hilti betonskih sider • Nosilnost: 2.000 kg na nivo • Poljska nosilnost: 12.000 kg • Vložene police vključene! 💰 Cena: 440 € neto brez DDV. • Količinski popust: po dogovoru • Stroški pošiljanja: po vsej Evropi po dogovoru • Dobavni rok: takoj dobavljivo • Ogled in prevzem: možno kadarkoli po dogovoru Stalno na zalogi več kot 5.000 tm paletnih regalov različnih proizvajalcev. (Pridržujemo si pravico do sprememb in napak v tehničnih podatkih, informacijah in cenah ter do vmesne prodaje! Glejte naše Splošne pogoje, vse cene brez DDV iz skladišča.)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, LISTA Heavy-Duty Pull-Out Rack M210 Manufacturer: LISTA Rack type: M 210 Year of manufacture: 2016 Design: Heavy-duty pull-out rack / industrial shelving For sale is a used LISTA heavy-duty pull-out rack suitable for industrial storage, tool, and material storage. This racking system is ideal for toolmaking, mechanical engineering, maintenance, mold making, production, and industrial warehousing. Technical Data: Maximum load capacity per shelving bay according to the nameplate: 9,000 kg Load capacity per pull-out frame, depending on shelf depth (according to nameplate): 860 mm: up to 1,000 kg 1060 mm: up to 900 kg 1260 mm: up to 800 kg The stated load capacities apply only when the load is evenly distributed. According to the manufacturer, only one pull-out frame may be extended per shelving bay at a time. Features: - Sturdy LISTA steel construction - Multiple heavy-duty pull-out frames - Wooden/inset panels - Industrial-grade design - Height-adjustable perforated supports - Lateral bracing / reinforcements - Extendable storage levels - LISTA brand quality Dimensions & Weight: Fpelhccqjy Rk Utomsg External dimensions per shelving bay (approx.): Width: 1,500 – 2,000 mm Depth: 1,000 – 1,300 mm Height: approx. 2,000 – 2,500 mm Estimated net weight per bay: Approx. 800 – 1,500 kg Actual dimensions and weights may vary depending on configuration and equipment. Condition: Used equipment with age- and use-related marks. Scratches, dirt, and signs of wear present. See pictures for visual condition. Scope of delivery: LISTA heavy-duty pull-out rack M210 including existing pull-out frames and panels Scope of delivery as shown Notes: Inspection possible by appointment.

Stanje: dober (rabljeno), Leto izdelave: 2016, 134 kosov, bočna zaščita / zaščita okvirja / zaščita pred trkom / vodilna ograja za paletne regale, enojne in dvojne vrste, Nedcon - rabljeno - : Cena iz skladišča: 95 € / kos (neto), demontirano, zapakirano in naloženo! Proizvajalec: Nedcon Tip: Set bočne zaščite sigma 135de Letnik: 2016 / 2019 Tip 1 (za enojne vrste): Felhccsy Aixuoqmepg 6 kosov na voljo Bočna zaščita sigma 135° L=1100mm Set bočne zaščite sigma 135deg L=1100 Dolžina: 120cm Višina: 40cm Globina: cca 22cm Teža: cca 31kg Nova cena cca 205 € (neto) / kos Tip 2 (za dvojne vrste): 124 kosov na voljo Bočna zaščita sigma 135° L=2400mm Set bočne zaščite sigma 135deg L=2400 Dolžina: 243cm Višina: 40cm Globina: cca 22cm Teža: cca 41kg Nova cena cca 227 € (neto) / kos Stanje: dobro – zelo dobro Na voljo: takoj Lokacija: Augsburg

Stanje: rabljeno, Dolžina ~ 77 tekočih metrov Globina 600 / 800 / 1200 mm Višina ~2000 - 4000 mm Stebri, količina ~ 56 kosov Felhoy Ez Dnjccqmspg Postavka vijačenih konzolnih regalov Fischer in drugih. Gre za celotno opremo obratovanja malega skobelnika. Prosto stoječe in stensko montirane. Eno- in dvostransko. Popolnoma prilagodljivo.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack with roof beams: Hot-dip galvanized bolt system Fpoljh R Taqjhccqmeg Scope of delivery: - 9 rack uprights, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms with 1,200 mm usable depth, with deflector - 9 roof beams, 1,500 mm cantilever, pre-drilled for on-site roof construction (*excluding timber purlins and trapezoidal sheets for the roof construction) - Including longitudinal and diagonal braces for 1,500 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and system can be extended at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction using IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright: 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof beams (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright fitted with 3 bolted cantilever arms, depth 1,200 mm, with deflector = 4 storage levels one above the other - Including longitudinal and diagonal braces with 1,500 mm center-to-center spacing - Rack length: 12,100 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with scheduling prior to delivery. Material is sensibly packed for easy unloading. The installation surface must be concrete, level, suitable for dowelling, and able to withstand the loads applied. The customer is responsible for checking and ensuring the ground condition, load-bearing capacity, and any official permits that may be required. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to occupational health and safety regulations, it is recommended that the rack uprights have at least 500 mm clearance above the top storage level.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with 1,200 mm usable depth base section 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright centre distance (4,000 mm rack length) Fastening material (bolts, nuts, and washers) - (*Delivery or pickup in approx. 1 - 2 weeks) - (*No paint damage!) - (*No damaged components!) - (*Spare parts available for reordering and extension anytime) - (*Offer available in larger quantities: Approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface painted in RAL 7016 (Anthracite) - Rack height 4,200 mm - Load capacity per upright 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - Supplied with assembly instructions and load plaques C4 according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. Fpslhccqomhhypomeg We offer reliable shipping with advance delivery notification. The materials are carefully packed for easy unloading. Delivery is possible approx. 1 - 2 weeks after order receipt. For outdoor installation, load capacities are reduced according to wind and snow load. The subfloor must be concrete, flat, suitable for doweling, and able to bear the imposed loads. Floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to German trade association recommendations, the rack uprights should have at least a 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolted system, hot-dip galvanized design Scope of delivery: - 4 upright frames, height 3,500 mm, with foot sections, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard version - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Mounting hardware (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extension is possible at any time) - (*Bulk availability: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright: 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Arms height-adjustable in 100 mm increments - Each upright comes with 3 bolt-on cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Including mounting hardware (without ground anchors) - With assembly instructions and C4 load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notification before delivery. Material is sensibly packed to enable easy unloading. If installed outdoors, the load capacities reduce according to wind and snow loads. The foundation must be concrete, level, and suitable for dowelling, and able to bear the imposed loads. The customer is responsible for checking and ensuring the floor properties, load-bearing capacity, and for any permits required by authorities. Fpjlhcjmhh Dhscqmjg Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association recommendations, the uprights should have at least 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Racking Used: Bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base 1,000 mm usable depth Fpolhccqjmhh Dzsmog - 12 cantilever arms with 1,000 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height: 2,600 mm - Load capacity per upright: 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and C4 load capacity plates according to DIN standards - Technical telephone support - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable shipping with advance notification before delivery. The material is packed in a way that allows for easy unloading. When installing outdoors, loading capacities are reduced due to wind and snow loads. The base must be concrete, level, and suitable for dowels, and capable of bearing the imposed loads. The floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall fixing is neither necessary nor recommended. According to professional association guidelines, it is recommended that rack uprights have an overhang of at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 2,600 mm with base, 1,000 mm - 12 cantilever arms, 1,000 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. fastening material (without floor anchors) Fpjlhcced Tbbdeqmsg - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity signage C4 according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site pick-up possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight forwarding with advance notice prior to delivery. Material is packed sensibly to enable easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for anchors, and capable of bearing the imposed loads. The client is responsible for checking and ensuring the ground condition and load-bearing capacity, as well as obtaining any necessary permits if required by authorities. The rack uprights must be anchored to the floor by the client; anchoring to the wall is not necessary and not recommended. According to professional association guidelines, it is recommended that the rack uprights have a minimum overhang of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base foot, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Mounting hardware (bolts, nuts and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts reordering and extension possible at any time - Offer available in larger quantities: approx. 90 uprights in stock Detailed description: - Robust steel construction made of IPE sections (bolted system) - Hot-dip galvanized finish - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base foot and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including mounting hardware (without floor anchors) - With assembly instructions and load plates C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Material is packed efficiently for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The subsoil must be concrete, level and suitable for dowelling, and must be able to bear the loads applied. Floor condition, load-bearing capacity and any necessary official approvals must be checked and ensured by the customer. Felefdkb Tshccqmepg Rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to accident prevention regulations, it is recommended that rack uprights feature at least 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: 4 rack uprights, height 3,000 mm, with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm bay spacing Fastening materials (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts available for reorder and extensions can be supplied at any time) - (Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments Fslhomhhx Ieccqmepg - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fixing materials (without floor anchors) - With assembly instructions and C4 load labels as per DIN standard - Professional telephone advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight service with pre-delivery notification. Material is packaged for easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, suitable for dowels, and able to accommodate the applied loads. Floor quality, load-bearing capacity, and any required official permits are to be checked and ensured by the customer. The rack uprights must be anchored to the floor by the customer; anchoring to the wall is neither required nor recommended. According to the German employers’ liability insurance association, it is recommended that the rack uprights have a minimum 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base section 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard type - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening material (bolts, nuts, and washers) Foljmhhyaohccqmepg - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolt-on cantilever arms as standard (=4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable transport with prior notice before delivery. The material is efficiently packed to facilitate easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow load. The foundation must be made of concrete, level, suitable for dowelling, and able to bear the applied loads. The suitability and load-bearing capacity of the floor, as well as any required official approvals, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to a wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the upright has at least a 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking used: Hot-dip galvanized bolt system Fslhccjh Ek Daoqmspg Scope of delivery: - 4 double-sided racking uprights, height 4,160 mm with base 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm axis distance - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Height-adjustable cantilever arms in 100 mm increments - 6 bolt-on cantilever arms and 2 base parts per upright, standard depth 1,200 mm = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm uprights distance - Rack length 4,000 mm - Including mounting material (without floor anchors) - Supplied with installation instructions and load capacity plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight with advance delivery notification. The material is sensibly packed to allow for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow load. The subsoil must be concrete, level and suitable for anchor fixing and must be able to absorb the acting loads. The floor structure and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the professional association, it is recommended that the uprights have at least 500 mm overhang on the top storage level above the upright top end.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, each with base section 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Fastening materials (bolts, nuts, and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts available and extensions possible at any time - Bulk offer available: approx. 40 uprights in stock Detailed description: - Sturdy steel construction made from IPE sections (bolted system) - Surface hot-dip galvanized - Rack height: 3,000 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms both 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm Fpolhcsmhh Anjcqmjg - Includes fastening materials (excluding floor anchors) - With assembly instructions and load capacity labels C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance delivery notification. Materials are packed efficiently for easy unloading. For outdoor installation, load capacities are reduced to account for wind and snow loads. The subfloor must be concrete, level, suitable for bolt anchors, and able to bear the applied loads. Floor condition, load capacity, and any required official permits must be checked and ensured by the customer. Racking uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to trade association guidelines, it is recommended that uprights project at least 500 mm above the uppermost storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized version Scope of supply: - 4 rack uprights, height 4,160 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and expandability at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized finish - Rack height: 4,160 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standards - Expert telephone advice - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is packaged for easy unloading. Fpelsd Tqalehccqmjg When installed outdoors, load capacities are reduced due to wind and snow loads. The floor must be concrete, level, and suitable for anchoring, and must be able to bear the applied loads. The floor condition and load-bearing capacity, as well as any necessary regulatory permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to health and safety regulations, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolt-together system in hot-dip galvanised version Scope of delivery: - 4 racking uprights, height 3,500 mm with base section 1,200 mm - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm centre distance Fpslhccsfdkb Ueqmog - Incl. fixing material (excluding floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts can be reordered and extensions are possible at any time) - (Large quantities available: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE sections (bolt-together system) - Surface hot-dip galvanised - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - Collection on site possible Our cantilever racking is exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load capacities are reduced according to wind and snow loads. The ground must be concrete, level, suitable for dowel fixing and able to bear the acting loads. The condition and bearing capacity of the floor and any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; anchoring to a wall is neither required nor recommended. According to trade association regulations, it is recommended that the racking uprights have at least 500 mm projection above the top storage level.