Konzolni regali nakup rabljenega (95)

Stanje: rabljeno, Dolžina ~ 77 tekočih metrov Globina 600 / 800 / 1200 mm Višina ~2000 - 4000 mm Stebri, količina ~ 56 kosov Postavka vijačenih konzolnih regalov Fischer in drugih. Pgedpfxjy Ez Dns Agxek Gre za celotno opremo obratovanja malega skobelnika. Prosto stoječe in stensko montirane. Eno- in dvostransko. Popolnoma prilagodljivo.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 2,600 mm with base, 1,000 mm - 12 cantilever arms, 1,000 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity signage C4 according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site pick-up possible Pgodpfxod Tbbde Agxok Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight forwarding with advance notice prior to delivery. Material is packed sensibly to enable easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for anchors, and capable of bearing the imposed loads. The client is responsible for checking and ensuring the ground condition and load-bearing capacity, as well as obtaining any necessary permits if required by authorities. The rack uprights must be anchored to the floor by the client; anchoring to the wall is not necessary and not recommended. According to professional association guidelines, it is recommended that the rack uprights have a minimum overhang of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: 4 rack uprights, height 3,000 mm, with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm bay spacing Fastening materials (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts available for reorder and extensions can be supplied at any time) - (Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg Psdpfxomhhx Ie Agxsgk - Includes longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fixing materials (without floor anchors) - With assembly instructions and C4 load labels as per DIN standard - Professional telephone advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight service with pre-delivery notification. Material is packaged for easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, suitable for dowels, and able to accommodate the applied loads. Floor quality, load-bearing capacity, and any required official permits are to be checked and ensured by the customer. The rack uprights must be anchored to the floor by the customer; anchoring to the wall is neither required nor recommended. According to the German employers’ liability insurance association, it is recommended that the rack uprights have a minimum 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base section 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard type - Including longitudinal and diagonal braces for 1,300 mm spacing Pgedpfxemhhyaj Agxjk - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolt-on cantilever arms as standard (=4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable transport with prior notice before delivery. The material is efficiently packed to facilitate easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow load. The foundation must be made of concrete, level, suitable for dowelling, and able to bear the applied loads. The suitability and load-bearing capacity of the floor, as well as any required official approvals, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to a wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the upright has at least a 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking used: Hot-dip galvanized bolt system Scope of delivery: - 4 double-sided racking uprights, height 4,160 mm with base 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm axis distance - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Height-adjustable cantilever arms in 100 mm increments - 6 bolt-on cantilever arms and 2 base parts per upright, standard depth 1,200 mm = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm uprights distance Pgsdpfxoh Ek Das Agxsk - Rack length 4,000 mm - Including mounting material (without floor anchors) - Supplied with installation instructions and load capacity plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight with advance delivery notification. The material is sensibly packed to allow for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow load. The subsoil must be concrete, level and suitable for anchor fixing and must be able to absorb the acting loads. The floor structure and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the professional association, it is recommended that the uprights have at least 500 mm overhang on the top storage level above the upright top end.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized version Scope of supply: - 4 rack uprights, height 4,160 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and expandability at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized finish - Rack height: 4,160 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standards Pgodpjd Tqalsfx Agxek - Expert telephone advice - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The floor must be concrete, level, and suitable for anchoring, and must be able to bear the applied loads. The floor condition and load-bearing capacity, as well as any necessary regulatory permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to health and safety regulations, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolt-together system in hot-dip galvanised version Scope of delivery: - 4 racking uprights, height 3,500 mm with base section 1,200 mm - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm centre distance - Incl. fixing material (excluding floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts can be reordered and extensions are possible at any time) - (Large quantities available: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE sections (bolt-together system) - Surface hot-dip galvanised - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - Collection on site possible Pgsdpfx Ajfdkb Uogxek Our cantilever racking is exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load capacities are reduced according to wind and snow loads. The ground must be concrete, level, suitable for dowel fixing and able to bear the acting loads. The condition and bearing capacity of the floor and any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; anchoring to a wall is neither required nor recommended. According to trade association regulations, it is recommended that the racking uprights have at least 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever racking system, powder-coated (RAL 7016 Anthracite): Scope of delivery: - 4 uprights, height 4,200 mm with base part, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm - Longitudinal and diagonal bracing for 1,300 mm upright spacing (system length 4,000 mm) - Fastening materials (bolts, nuts, and washers) - (*No paint damage!) - (*No damaged components!) - (*Spare parts can be reordered; extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface coated in RAL 5010 (Gentian Blue) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Base section and cantilever arms with usable depth of 1,200 mm - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolted cantilever arms as standard (= 4 storage levels) - Load capacity per arm: 730 kg - Includes longitudinal and diagonal braces for 1,300 mm upright spacing - System length: 4,000 mm - Fastening materials included (floor anchors not included) - Supplied with assembly instructions and C4 load plates according to DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance delivery notice. The material is sensibly packed for easy unloading. Delivery is possible approximately 1–2 weeks after order receipt. Please note: For outdoor installation, the load capacities are reduced due to wind and snow loads. Pgjdpfsmidyfsx Agxjk The substrate must be concrete, level, and suitable for anchoring, and must be able to take the imposed loads. Customers are responsible for verifying soil condition, load-bearing capacity, and obtaining any necessary official permits. Uprights must be anchored to the floor by the customer; wall mounting is neither necessary nor recommended. According to trade association guidelines, uprights should project at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking, used: Hot-dip galvanized bolt-together system Scope of delivery: - 4 double-sided racking uprights, height 3,500 mm, each with 1,200 mm base parts - 24 cantilever arms, depth 1,200 mm, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing Pedpfjmkixwjx Agxsgk - Incl. mounting hardware (floor anchors not included) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available anytime) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components with hot-dip galvanized finish - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright has 6 bolted cantilever arms and 2 base sections, depth 1,200 mm, standard = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (floor anchors not included) - Supplied with assembly instructions and C4 rated load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection available Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notice before delivery. The material is packed for easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The base must be concrete, flat, and suitable for anchoring as well as capable of supporting the applied loads. It is the customer's responsibility to check and ensure the suitability and load-bearing capacity of the substrate and obtain any necessary permits. Racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to German safety guidelines, it is recommended that the uprights have a minimum overhang of 500 mm above the highest storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Used cantilever racking: bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm upright spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Pgodsfdkbhspfx Agxok Detailed Description: - Robust steel construction from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Local pickup possible Our cantilever racking systems are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The materials are packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The foundation must be level, concrete, and suitable for doweling, and must be capable of bearing the applied loads. The customer is responsible for verifying and ensuring the suitability and load capacity of the flooring, and for obtaining any necessary permits from authorities. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to German Trade Association guidelines, it is recommended that rack uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Rack Used: Bolt System, Hot-Dip Galvanized Version Scope of delivery: Pgedpfx Aemhhf Ssgxsk - 4 upright frames, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm bay length (1,300 mm spacing) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes mounting material (without floor anchors) - Assembly instructions and C4 load capacity labels according to DIN standard included - Expert telephone advice - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior delivery notification. Materials are sensibly packaged to ensure easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, and suitable for dowelling, as well as able to bear the applicable loads. Floor conditions and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site. Anchoring to the wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Screw system in hot-dip galvanized design: Pickup price: Robust steel construction made of IPE sections Rack height: 3,500 mm Load capacity per upright: 2,100 kg Base section: 1,200 mm usable depth Pjdpfemhhl Hsx Agxogk Cantilever arms height-adjustable in 100 mm increments Each upright equipped with 3 bolted cantilever arms, usable depth 1,200 mm, standard (equals 4 levels) Load capacity per cantilever arm: 700 kg Including longitudinal and diagonal bracing Mounting hardware included (ground anchors not included) Supplied with assembly instructions and C4 load capacity labels according to DIN standards

Stanje: novo, Leto izdelave: 2024, nosilnost na konzolno roko: 500 kg, višina police: 3.200 mm, skupna dolžina: 2.100 mm, skupna višina: 3.200 mm, razmak osovin: 1.000 mm, nosilnost na stojalo: 2.500 kg, Cantilever Rack in Hot-Dip Galvanized Design: Scope of delivery: - 3 uprights, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) - 12 cantilever arms with 1.8 m usable depth (for chipboard panels approx. 2.1 m deep) - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Mounting material (bolts, nuts and washers) Net price: €2,490.00 plus VAT Detailed Description: - Robust steel construction made of IPE profiles (bolted system) - Rack height: 3,200 mm - Load capacity per upright: 2,500 kg - Base section and cantilever arms with 1,800 mm usable depth (for 2,100 mm chipboard depth) - Cantilever arms height adjustable in 100 mm increments - 4 bolted cantilever arms per upright as standard (= 5 storage levels) - Load capacity per cantilever arm: 500 kg - Including longitudinal and diagonal bracing for 1,000 mm upright spacing - Rack length = 2,100 mm - Includes mounting material (excluding floor anchors) Pgjdpfxeqt Dmyo Agxsk - Supplied with assembly instructions and load signs C4 according to DIN standard - Made in Germany - Short delivery times Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. Material is sensibly packed for easy unloading. Delivery for stock items can be made approximately 1 week after receipt of order. When installed outdoors, the load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, suitable for dowelling, and capable of supporting the applied loads. The customer is responsible for checking and ensuring soil condition, bearing capacity, and any necessary official permits. Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to occupational safety regulations, it is recommended that the uprights provide at least 500 mm projection above the top storage level.

Stanje: dober (rabljeno), Cantilever racking OHRA 3 m high Over 100 m in stock, see photos. Height: 3 m Arms: 100 cm Load capacity per arm: 800 kg 4.5 running meters, 4 uprights with arms Negotiable price: €2,360.-- net Pgodpfx Agjcd Dwyoxok Offer includes: 4 uprights with base, 3 m high 4 adjustable arms per upright, 100 cm each, load capacity 800 kg/arm Diagonal bracing, stiffeners, and spacers included. Frame spacing: 150 cm Load capacity per upright per side: 3,200 kg Other heights available: 2.5 m, 4 m, or 6 m Other configurations available on request: Over 3,000 running meters of pallet racks from various manufacturers in stock at all times. Transport and assembly available on request. (Technical modifications, errors in data, specifications and prices, and prior sale excepted! See our Terms and Conditions; all prices ex VAT ex works.) Purchase / Sale We are constantly looking for and offering numerous items from various sectors Broom-clean business clearances Company liquidations Fast - flexible - efficient! We also clear out and/or dispose for insolvency administrators. Send us some keywords and we will get back to you promptly. To visit our page, please click on our logo!

Stanje: rabljeno, Različni konzolni regali 6x regal: Mere: 6.125 x 2.400 x 3.000 mm Pgodpfjyrq Nlex Agxsk Teža pribl.: 8.000 kg 3x regal: Mere: 5.650 x 2.400 x 3.000 mm Teža pribl.: 7.380 kg Na voljo so statični izračuni !! Slika 1 prikazuje regal v sestavljenem stanju !!

Stanje: rabljeno, Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Modell 5003, nosilnost na konzolno roko: 1.500 kg, višina police: 3.585 mm, skupna dolžina: 6.200 mm, skupna širina: 1.520 mm, skupna višina: 3.985 mm, število vrst polic: 8, Konzolni regal, izvlečni, proizvajalec Lützenkirchen Psdpfxoyzn S Rj Agxjgk

Stanje: novo, Cantilever Racking New, H: 400 cm, Base + 3 Storage Levels with Roof & Rear Wall Delivery: Free delivery within Germany (except islands) Specifications: - Height: approx. 400 cm - Depth: approx. 147 cm - Length: approx. 1,420 cm - Cantilever Arms: approx. 125 cm - Axle spacing: 290 cm (can be customised on request) - New units – made in Germany - Delivery time: approx. 6 weeks after clarification of commercial details - Load capacity: 1,000 kg per arm - Load capacity: 4,000 kg per upright - Uprights hot-dip galvanised - Cantilever arms hot-dip galvanised - Arms bolted - Arms adjustable in 200 mm increments - Levels: base + 3 storage levels (4 storage levels total) Scope of delivery: - 06 x uprights, incl. base, approx. 400 cm, made from IPE270 - 18 x cantilever arms, approx. 125 cm, made from IPE120 - 06 x roof beams, approx. 150 cm, made from IPE120, with 5° roof pitch - Incl. roof and rear wall material - Incl. all required fastening elements and bolts Why choose BLT cantilever racking? Podsy Hiu Rspfx Agxsgk - Certified German manufacturer, DIN EN 1090 – Made in Germany - All specified load capacities for uprights and arms are statically proven at 100% load - All racks supplied hot-dip galvanised. Can be used indoors or outdoors and do not corrode like painted systems. Uniform appearance for many years - We use only legally prescribed hot-dip galvanised bolt sets according to DIN EN 15048-1 - Long-term availability of spare parts - Upright base and rear are welded together for extra safety and faster installation—no need to bolt base to rear - Bracings made from angle steel, eliminating adjustment with turnbuckles and reducing assembly time - No elongated hole system—no weakening of upright profile Price: €12,250.00 net plus statutory VAT You will receive an invoice with VAT shown Assembly: Our trained personnel will gladly assist with professional assembly and dismantling of your workshop equipment if required Our recommendation: Let us know your requirements... We are happy to support you from planning and ordering to installation of your project

Stanje: novo, Leto izdelave: 2022, Cantilever Racking NEW STOCK Specifications: - Height: approx. 350 cm - Depth: approx. 137 cm - Length: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle spacing: 131 cm - NEW STOCK, available immediately from stock. - 500 kg load capacity per arm - 2250 kg load capacity per upright - Uprights hot-dip galvanized. - Cantilever arms hot-dip galvanized. Pgjdpfx Asy Hiu Djgxjk - Arms are bolt-on. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels total) Rack consists of: - 04 x uprights, incl. base approx. 350 cm, made of IPE160. - 12 x cantilever arms approx. 120 cm, made of IPE80. - Incl. all necessary connecting elements and bolts. Why choose BLT Cantilever Racking? - Certified German manufacturer according to DIN EN 1090 – Made in Germany - All specified load capacities for both uprights and arms are statically verifiable at 100% load. - All racking systems supplied in hot-dip galvanized finish. Can be installed indoors or outdoors, and do not rust like painted systems. Consistent appearance for many years. - We use legally required hot-dip galvanized fastener assemblies according to DIN EN 15048-1 - Long-term availability of spare parts - Upright foot and upright back are welded together, offering enhanced safety and quick installation, as feet do not need to be bolted separately. - Bracing made of angle steel, eliminating the need for tension rod adjustments. This significantly reduces assembly time. - No slotted hole system, so the upright profile remains uncompromised. Price: €2,356.00 net + statutory VAT. You will receive an invoice with VAT shown separately. Transport: Delivery can be arranged by our partner freight forwarder upon request. Freight cost depends on postal code. Assembly: Our trained staff are available to assist with professional assembly and disassembly of your storage systems if required. Our recommendation: Let us know your requirements... We are happy to support you in realizing your projects, from planning and ordering to assembly.

Stanje: novo, Cantilever Rack Double-Sided New Pgjdpfxoy Hiuks Agxsk Specifications: - Height: approx. 400 cm - Width: approx. 256 cm - Length: approx. 18.45 linear meters - Cantilever arms: approx. 120 cm - Column spacing: approx. 131 cm - Brand new ex works - Double-sided - 500 kg load capacity per arm - 2250 kg load capacity per upright - Uprights hot-dip galvanized - Arms hot-dip galvanized - Arms are bolted - Arms adjustable in 200 mm increments - Levels: Base + 4 storage levels (5 storage levels in total) - Delivery time approx. 4 weeks The rack consists of: - 15 x uprights, double-sided, incl. base, approx. 400 cm, made of IPE160 - 120 x cantilever arms, approx. 120 cm, made of IPE 80, without end stops - Includes all necessary connectors and bolts Why choose BLT Cantilever Racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load capacities for the rack uprights and arms are structurally verified at 100% load - All rack systems are supplied in hot-dip galvanized finish, suitable for indoor and outdoor use, and do not rust like painted systems. Consistent appearance for many years. - We use legally required hot-dip galvanized bolt sets according to DIN EN 15048-1 - Extended re-order guarantee - Upright base and upright back are welded together for additional safety and shorter assembly times, as the bases do not need to be bolted separately to the upright back - Bracing made from angle steel, eliminating the need for tension rods. This reduces installation time. - No slotted hole system, which means the upright profile is not weakened. Price: €12,450.00 net plus applicable VAT You will receive an invoice showing VAT separately. Transport: Delivery can be arranged via our partner freight forwarder on request; costs are postcode-dependent. Assembly: Our trained personnel are available to provide professional assembly and disassembly of your equipment if desired. Our recommendation: Let us know your requirements... We are happy to assist you with the realization of your projects, from planning to ordering and assembly.

Stanje: novo, Cantilever Racking Custom-Made to Your Specifications! Ideal for storing your long goods. Easy access to your products thanks to the single- and double-sided configurations. This expandable system allows you to add elements as your requirements grow. Perfect for remnants or long materials in metalworking and woodworking operations. Why choose BLT Cantilever Racks? • Certified German manufacturer according to DIN EN 1090 – Made in Germany • All specified load capacities of rack frames and cantilever arms are statically verifiable at 100% load! • All racking systems are supplied with a hot-dip galvanized finish. Therefore, they can be installed both indoors and outdoors and will not rust like painted systems. Consistent appearance for many years. • We use legally required hot-dip galvanized bolt sets as per DIN EN 15048-1 • We use the legally required capacity labels C4 according to DIN EN 15635 / BGR 234 Pedpsy Hiudefx Agxegk • Long-term availability of spare parts • Upright base and upright back are welded together, providing extra safety and fast assembly since the bases do not need to be bolted to the upright backs. • Bracing made from angle steel, so no adjustment via turnbuckles is necessary. This reduces assembly time. • No slotted hole system, therefore, no weakening of the upright profile. Transport: Delivery is carried out on request by our partner shipping company, with costs depending on the postal code. Assembly: Our skilled staff are happy to assist you with professional assembly and disassembly of your equipment as needed. Our recommendation: Tell us your requirements... we are happy to support you in implementing your projects – from planning and ordering through to assembly. Interested or have questions? Simply contact us by message or phone call. You can find our phone number on our company page. ☎️ We are available by phone Monday to Friday, 8:00 AM to 3:00 PM. Alternatively, leave us a message with your name and number, and we will get back to you as soon as possible.

Stanje: novo, Leto izdelave: 2020, Cantilever Racking NEW STOCK Specifications: - Height: approx. 300 cm - Depth: approx. 137 cm - Length: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle spacing: 131 cm - NEW STOCK available immediately from stock. - 750 kg load capacity per arm - 2250 kg load capacity per upright - Uprights are hot-dip galvanized. - Cantilever arms are hot-dip galvanized. - Arms are bolted on. - Arms adjustable in 100 mm increments. - Levels: Base + 3 storage levels (4 storage levels total) Rack consists of: - 04 x uprights, approx. 300 cm incl. base, made from IPE160 - 12 x cantilever arms, approx. 120 cm, made from IPE100 - incl. all necessary connecting elements and bolts Podpfx Aoy Hit Togxegk Why BLT Cantilever Racks? - Certified German manufacturer DIN EN 1090 – Made in Germany - All stated load capacities for uprights and cantilever arms are statically verifiable at 100% load - All racking systems are supplied in hot-dip galvanized finish. Suitable for indoor and outdoor use, and unlike painted systems, they do not rust. Consistent appearance for many years. - We use legally mandated hot-dip galvanized bolt assemblies according to DIN EN 15048-1 - Long-term availability of spare parts - Upright base and upright back are welded together, providing additional security and reducing assembly time, as feet do not need to be bolted to the upright back - Bracing made from angle steel – no tension rods necessary, which shortens assembly times - No slotted hole system – this means no weakening of the upright profile Price: €2,404.00 net + legally applicable VAT You will receive an invoice with VAT shown separately. Accessories such as floor anchors, impact protection, etc., can also be purchased from us. Transport: Delivery can be arranged via our partner freight forwarder; costs depend on postal code. Assembly: Our trained personnel are available to assist with professional assembly and dismantling of your facility, if required. Our recommendation: Let us know your requirements... We are happy to help realize your projects from planning to ordering to installation.

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, nosilnost na konzolno roko: 140 kg, višina police: 2.500 mm, skupna dolžina: 3.150 mm, skupna višina: 2.500 mm, razmak osovin: 1.030 mm, nosilnost na stojalo: 1.120 kg, Approx. 3.15 linear meters cantilever racking with shelf panels, 60 cm deep, height: 250 cm, 140 kg/arm, META Multistrong Specifications: - Height: approx. 250 cm - Depth: approx. 81 cm - Length: approx. 315 cm - Cantilever arms: approx. 60 cm - Axial dimension: 103 cm - NEW, available immediately from stock. - 140 kg load capacity per arm - 1120 kg load capacity per upright - Uprights in RAL5010 (gentian blue) - Cantilever arms in RAL5010 (gentian blue) Pgjdpfjy Hitmex Agxjk - Arms are hooked in and secured with locking pins - Arm height adjustable in 70 mm increments - Levels: base + 4 storage levels (total of 5 storage levels) The rack consists of: - 4 x uprights, including base, approx. 250 cm, made from IPE120 - 16 x cantilever arms, approx. 60 cm, rectangular profile 40 x 30 mm - 12 x META shelf panels, approx. 100 x 60 cm - Includes all necessary connecting elements and bolts -- Immediately available -- Price: €1,765.00 net €2,100.35 gross You will receive an invoice showing VAT separately. Accessories such as floor anchors, impact protection, etc. can also be purchased from us. Transport: Delivery is provided upon request by our partner freight company; shipping costs depend on your postcode. Assembly: Our trained staff are happy to assist you with the professional assembly and dismantling of your warehouse equipment. Our recommendation: Let us know your requirements... We are happy to help you realize your projects—from planning and ordering to assembly.

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, nosilnost na konzolno roko: 140 kg, višina police: 2.500 mm, skupna dolžina: 3.150 mm, skupna širina: 810 mm, skupna višina: 2.500 mm, razmak osovin: 1.030 mm, nosilnost na stojalo: 560 kg, approx. 3.15 m cantilever racking, height: 250 cm, 140 kg/arm META Multistrong Specifications: - Height: approx. 250 cm - Depth: approx. 81 cm - Length: approx. 315 cm - Cantilever arms: approx. 60 cm - Axle spacing: 103 cm - NEW STOCK immediately available from warehouse. - 140 kg load capacity per arm - 1120 kg load capacity per upright - Uprights in RAL5010 (gentian blue). - Cantilever arms in RAL5010 (gentian blue). - Arms are hooked in and secured with locking pins. - Arms adjustable in 70 mm increments. - Levels: base + 4 storage levels (5 storage levels in total) Racking consists of: - 04 x uprights incl. base, approx. 250 cm, made of IPE120 profile - 16 x cantilever arms, approx. 60 cm, made of rectangular 40 x 30 mm profile - Includes all necessary connecting elements and bolts Pjdpfxoy Hitgs Agxegk -- Immediately Available -- Price: €1,525.00 net €1,814.75 gross You will receive an invoice with VAT shown separately. Accessories such as floor anchors, collision guards, etc. can also be purchased from us. Transport: Delivery can be arranged upon request via our partner freight forwarder. Shipping costs dependent on postal code. Installation: Our trained staff are available to assist you with the professional assembly and disassembly of your facility as required. Our recommendation: Let us know your requirements... We are happy to assist you with your projects from planning through to ordering and installation.

Stanje: novo, Leto izdelave: 2020, Cantilever Racking NEW STOCK Specifications: - Height: approx. 416 cm - Depth: approx. 137 cm - Length: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle spacing: 131 cm - NEW STOCK, immediately available from stock. - 500 kg load capacity per arm - 2250 kg load capacity per upright - Uprights hot-dip galvanized - Cantilever arms hot-dip galvanized - Arms are bolted - Arms height-adjustable in 100 mm increments - Levels: Base + 3 storage levels (4 storage levels in total) Racking consists of: - 04 x uprights incl. base, approx. 416 cm made from IPE160 - 12 x cantilever arms, approx. 120 cm made from IPE 80 - Including all necessary connecting elements and bolts Why BLT Cantilever Racking? - Certified German manufacturer – DIN EN 1090 – Made in Germany - All stated load capacities for frames and arms are statically verified at 100% load. - All racking systems are delivered hot-dip galvanized. Suitable for indoor and outdoor use, and won’t rust like painted racks. Consistent appearance for many years. Pedpfsy Hitaox Agxsgk - We use legally required hot-dip galvanized bolt sets according to DIN EN 15048-1 - Long-term availability guarantee for spare parts - Base and spine of upright are welded together, ensuring maximum safety and reduced assembly time, as there’s no need to bolt the base to the upright separately - Bracing made from angle steel means there’s no adjustment required via turnbuckles, further shortening assembly times - No slotted hole system, ensuring no weakening of the upright profile Price: EUR 2,578.00 net + VAT as required by law. You will receive an invoice with VAT shown separately. Accessories such as floor anchors, impact protection, etc., are also available from us. Transport: Delivery can be arranged by our partner forwarding company on request, with shipping costs depending on postal code. Installation: Our trained staff are available to assist you with professional assembly and disassembly of your warehouse equipment as needed. Our recommendation: Let us know your requirements… We are pleased to help you realize your projects, from planning and ordering to installation.

Stanje: novo, Leto izdelave: 2022, Cantilever Racking NEW Specifications: - Height: approx. 300 cm - Depth: approx. 137 cm - Length: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle distance: 131 cm - NEW, immediately available from stock. - 500 kg load capacity per arm - 2250 kg load capacity per upright - Uprights hot-dip galvanized. - Cantilever arms hot-dip galvanized. - Arms bolted. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels total) Racking consists of: - 4 x uprights, incl. base, approx. 300 cm, made of IPE160 - 12 x cantilever arms, approx. 120 cm, made of IPE80 - Incl. all necessary connecting elements and bolts. Why choose BLT cantilever racking? - Certified German manufacturer DIN EN 1090 – Made in Germany - All stated load capacities for uprights and cantilever arms are statically verified at 100% capacity. - All racking is supplied in hot-dip galvanized finish. Suitable for both indoor and outdoor use, does not rust like painted racks. Maintains consistent appearance for many years. - We use legally required hot-dip galvanized bolt sets in accordance with DIN EN 15048-1 - Long-term aftermarket guarantee - Upright foot and upright back are welded together, providing extra safety and reducing assembly time as the feet do not need to be bolted separately to the upright backs. - Bracing made from angle steel eliminates the need for adjustable turnbuckles, thus shortening assembly time. - No slotted hole system, meaning no weakening of the upright profile. Psdpfx Agoy Hir Njxjgk Price: €2,265.00 net + applicable statutory VAT You will receive an invoice with VAT shown separately. Transport: Delivery by our partner freight forwarder on request, costs depend on postal code. Assembly: Our trained staff are happy to assist with the professional assembly and disassembly of your equipment as needed. Our recommendation: Let us know your requirements... We are happy to assist you in realizing your projects, from planning and ordering to assembly.