Kruh Polica Vozička nakup rabljenega (1.611)

Stanje: rabljeno, Okvir 7000*1100 mm Prečke 3600*120 mm Nosilnost 2T/polica Potrebujete police ali dodatke v drugih sestavah ali izvedbah? Kontaktirajte nas. Nudimo obsežen program novih in rabljenih polic ter dodatkov in vam z veseljem pomagamo pri načrtovanju. Dodatna oprema, na primer: Zaščita okvirjev, vogalov in naletov, zaščite proti potiskanju, iverne plošče, mrežaste rešetke, zadnje mreže, prečne letve – na voljo. Dostava: Prosimo, povprašajte za stroške dostave, navedite poštno številko, kraj in želeno količino artiklov. Dodatne storitve: Načrtovanje, montaža/demontaža polic, odkup/prodaja Pridržujemo si pravico do sprememb in napak v tehničnih podatkih, informacijah in cenah ter vmesne prodaje! Hnjdsx U Agpspfx Af Tsg

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, skupna širina: 2.000 mm, skupna dolžina: 12.000 mm, skupna višina: 2.800 mm, skupna masa: 2.000 kg, BITO izvlečno regal - brez vsebine - Dimenzije na odlagalno površino: 2000 x 1300 mm - Skupaj 40 izvlečnih polic Pozor: Artikel mora biti nujno prevzet med 18. in 26.02.2026 na še dogovorjen termin. FCA D-78087 Mönchweiler – naloženo na tovornjak Hnedpfsx Tzkwsx Af Tog

Stanje: rabljeno, • FTG mali regalni skladiščni sistem za steklo • 6 predalov, vsak s podporo 280 mm • Dolžina = 3350 mm • Širina = 2350 mm Hnedexx S Axepfx Af Tog • Višina = 2050 mm • Cena na zahtevo

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack with roof beams: Hot-dip galvanized bolt system Scope of delivery: - 9 rack uprights, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms with 1,200 mm usable depth, with deflector - 9 roof beams, 1,500 mm cantilever, pre-drilled for on-site roof construction (*excluding timber purlins and trapezoidal sheets for the roof construction) - Including longitudinal and diagonal braces for 1,500 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and system can be extended at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction using IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright: 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof beams (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright fitted with 3 bolted cantilever arms, depth 1,200 mm, with deflector = 4 storage levels one above the other - Including longitudinal and diagonal braces with 1,500 mm center-to-center spacing - Rack length: 12,100 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times Hjdpsh R Taqsfx Af Tong - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with scheduling prior to delivery. Material is sensibly packed for easy unloading. The installation surface must be concrete, level, suitable for dowelling, and able to withstand the loads applied. The customer is responsible for checking and ensuring the ground condition, load-bearing capacity, and any official permits that may be required. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to occupational health and safety regulations, it is recommended that the rack uprights have at least 500 mm clearance above the top storage level.

Stanje: dober (rabljeno), Leto izdelave: 1997, Paletni vvozni regal, Ohra, 850 kg/paleta, 2.470 paletnih mest, tudi za CP1 industrijske palete – rabljeno -: Cena na lokaciji: 44.500 € (neto), vključno z demontažo itd.! Proizvajalec: Ohra Tip: vvozni regalni sistem Leto izdelave: 1997 Nosilnost na paleto: 850 kg Širina kanala: cca 1,48 m Globina kanala: cca 8,56 m Višina: cca 11 m in 8,10 m Hodjx Tp Eiopfx Af Tong cca 68 regalnih polj skupaj 247 kanalov 25 polj s 3 kanali 43 polj s 4 kanali Kapaciteta na kanal: 10 euro palet ali 7 CP1 industrijskih palet Skupna kapaciteta: 2.470 euro palet Stanje: dobro Na voljo: takoj Lokacija: Porenje-Pfalška

Stanje: rabljeno, Leto izdelave: 2007, RA1784 Galler OMEGA Pallet Racking System Used 16600 x 5400 x 1350 mm Installed in a warehouse Rack height: 5,400 mm Rack depth: 1,350 mm Clear bay width: 3,200 mm Stored goods: Pallets with goods Storage depth: 1,350 mm Storage levels: 1. Goods stored on the floor 2nd to 5th levels: goods stored on pairs of beams Load capacity per pair of beams with a clear bay width of 3,200 mm and level height of 1,500 mm: 2,100 kg Bay load: 8.4 t with a column buckling length of 1,500 mm (minimum 4 bays) → All load capacities apply to evenly distributed loads. Finish: Frame: Sendzimir galvanized Beams: RAL 7035 light grey WITH SURFACE RUST SPOTS Setup: 1 unit single-sided racking row, installed against a hall wall 5 x 3,300 + 100 = total length 16,600 mm Comprising: 6 units Galler Omega Upright Frames, bolted 5,400 x 1,350 mm 40 units Galler Sigma Beams 3,200 mm 80 units Safety Pins Price net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, Würzburg Optional, if required: 2 used impact protection corners At the beginning/end and at drive-through points for protecting the rack uprights For individual, professional advice, simply get in touch with us. Contact us by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Hedpfek Abbbjx Af Tsng Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and contact for intralogistics

Stanje: rabljeno, Tip: za Manorga sestavljive regale Velikost: Za regale z globino 57,5 cm Višina: 14,5 cm Površina: Pocinkano Cena: 1,5 EUR/kos Delilec regala ali organizator regala je praktičen dodatek za shranjevanje, s katerim lahko police razdelite na manjše predelke ali območja. Ti elementi so namenjeni predvsem ustvarjanju reda in preglednosti za različne predmete – kot so knjige, dokumenti, posoda, oblačila ali pisarniški material. Dostava: Za ceno prevoza prosimo povprašajte ob navedbi vaše poštne številke, kraja in želene količine artiklov. Dodatne storitve: Načrtovanje, montaža/demontaža regalov, odkup/prodaja Pridržujemo si pravico do sprememb in napak v tehničnih podatkih, informacijah in cenah ter do vmesne prodaje! Hjdpex Uy E Aefx Af Tong

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 230 V, trajanje garancije: 3 meseci, Certificirano po DGUV do: 11/2026, vrsta vhodnega toka: Klimatska naprava, skupna dolžina: 440 mm, skupna širina: 800 mm, skupna višina: 470 mm, vhodna frekvenca: 50 Hz, leto zadnje generalne obnove: 2025, širina transportnega traku: 160 mm, potrebna višina: 470 mm, zahteva za prostor dolžina: 440 mm, potrebna širina: 800 mm, Naprava za rezanje pekovskih izdelkov Hnsdpetpl Ukjfx Af Teg TOP Schneid - Leo z nastavljivim dovodnim lijakom Namizna naprava iz nerjavečega jekla Zmogljivost do pribl. 2000 žemljic Nastavljiva višina reza Za vzdolžno rezanje pekovskih izdelkov Največje dimenzije izdelka: 160 x 80 mm (Š x V) Samo pri nas preizkušeno po DGUV V3 Priključek 230V, pripravljeno za uporabo Mere pribl.: 800 x 440 x 470mm (Š x G x V) Rabljeni stroj, obnovljen in preverjen pri SAB Z garancijo in servisom rezervnih delov Opcijsko: Leasing in najem Vozni pult za LEO Vzdrževalna pogodba Dostava Uvajanje in zagon Veliko drugih pekarskih strojev na zalogi

Stanje: novo, Leto izdelave: 2025, 576 NEW Bread Production Line OPTIMA by Bakeres. Operated by 1 or a maximum of 2 people. The entire line occupies only 6 m². This line combines simplicity and efficiency at a very attractive price. TECHNICAL DATA: - Working capacity: 600–2400 pcs/h, - Maximum capacity: 3000 pcs/h. Hodpfx Afsi Hlyqe Tjng - Weight range: 250–2000 g. More information available at: bakeres pl

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack with roof supports: Hot-dip galvanized bolted system Scope of delivery: 9 rack uprights, height 4,230 mm with foot section, usable depth 1,200 mm 27 cantilever arms with usable depth 1,200 mm, with deflectors Hnedpemhhy Nofx Af Tjg 9 roof beams with 1,500 mm cantilever, pre-drilled for customer-supplied roofing (*Without timber purlins and trapezoidal sheets for roofing) Including longitudinal and diagonal bracing for 1,500 mm upright spacing Including fasteners (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and expansion possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright 2,700 kg plus roof, wind, and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof supports (maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, 1,200 mm deep, with deflectors = 4 storage levels stacked - Including longitudinal and diagonal bracing at 1,500 mm upright spacing - Rack length: 12,100 mm - Including fasteners (excluding floor anchors) - Supplied with assembly instructions and C4 load plates according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight shipping with prior delivery notification. The material is packed appropriately to enable easy unloading. The floor must be concrete, level, capable of being doweled, and able to bear the acting loads. The customer is responsible for checking and ensuring the floor condition, load capacity, and any necessary local permits. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to trade association guidelines, the rack uprights should protrude at least 500 mm above the top storage level.

Stanje: rabljeno, Leto izdelave: 2003, Funkcionalnost: nepreverjeno, nosilnost na konzolno roko: 1.000 kg, nosilnost na stojalo: 4.000 kg, We are offering this used G. SIMON & Co. heavy-duty cantilever racking, year of manufacture 2003. Type: Order No.: 2953 Year of manufacture: 2003 Maximum load per arm: 1,000 kg Maximum load per upright side: 4,000 kg Hnsdpfxsx Stcpe Af Tjg If you have any questions or require further information, please feel free to contact us via message or phone. For sale is a heavy-duty double-sided cantilever rack by G. SIMON & Co. Lagertechnik (year 2003). This system is ideal for storing long goods such as pipes, profiles, bar stock, mouldings, panels, etc. The rack is robustly constructed and designed for high load capacities. Technical Data: Manufacturer: G. SIMON & Co. Lagertechnik (Hamburg) Year of manufacture: 2003 Order No.: 2953 Design: double-sided Cantilever arms: approx. 8 per rack (4 per side) Load capacity: 1,000 kg per arm Max. load capacity: 4,000 kg per upright side Scope of delivery: 1x double-sided cantilever rack incl. approx. 8 cantilever arms (supply as per photos/inventory). Note: Measurements (height / arm length / bay length) on request or after re-measurement.

Stanje: zelo dobro (rabljeno), Shelf panels, shelves, shelf panel - Material: galvanized Hsdeghm Svepfx Af Tong - Dimensions: 765/995/H37 mm - Quantity: 30 shelf panels available - Price: for complete lot - Transport dimensions: 1200/800/H1330 mm - Transport weight: 224 kg

Stanje: dober (rabljeno), Rahmen: 2750*1100 mm Traversen: 1800*80 mm 2800 kg/polica 3600*145 mm 3000 kg/polica 2700*100/120 mm 2400-3000 kg/polica Ako su vam potrebni regali ili dodatna oprema u drugim konfiguracijama ili verzijama, slobodno nas kontaktirajte. Nudimo širok program novih i polovnih regala kao i dodatne opreme, a rado ćemo Vas podržati i prilikom planiranja. Dalja dodatna oprema kao što su: zaštita za ramove, uglove i pristup, elementi protiv prolaska, iverica, rešetkaste police, mreža za zadnju stranu, poprečne grede – dostupni su po zahtevu. Dostava: Molimo vas da pošaljete upit za troškove transporta, uz navođenje poštanskog broja, mesta i željene količine artikala. Hnedpfed Duc Tjx Af Teg Druge usluge: Planiranje, montaža/demontaža regala, otkup/prodaja Izmena i greške u tehničkim podacima, informacijama i cenama, kao i prethodna prodaja – zadržavamo pravo!

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2013, obratovalne ure: 5.528 h, nosilnost: 2.500 kg, dvižna višina: 122 mm, težišče tovora: 600 mm, vrsta goriva: električni, tip droga: simpleks, gradbena višina: 1.300 mm, napetost baterije: 24 V, dolžina vilic: 1.150 mm, lastna masa: 575 kg, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONALS IN OPERATION. Our forklifts are refurbished to FEM-4.004 standards and the latest safety requirements – ensuring maximum quality and safety for your operations. From the chassis to the battery, including drive, brakes, steering, and electrics – every vehicle is thoroughly inspected and overhauled. ✔ Made in Germany – with responsibility and precision ✔ Rigorous technical inspection ✔ 400+ vehicles available ✔ Worldwide shipping & customs handling ✔ Service & spare parts at fair prices ✔ Personal support – even after your purchase Test on site now and get expert advice – we will find the ideal solution for you. Industrial Truck Data: - Manufacturer: Jungheinrich - Model: Low-level pallet truck ERE 225 FP - Drive type: Electric - Load capacity: 2,500 kg - Year of manufacture: 2013 - Operating hours: 5,528 - Lift height: 122 mm - Mast type: None - Free lift: No - Initial lift: Yes - Overall width: 800 mm - Overall height: 1,300 mm Hnsdpex H T Uuofx Af Tog - Fork length: 1,150 mm - Unladen weight: 575 kg - Load centre: 600 mm - Tyres: Polyurethane - Model type: ERE 225 FP - Battery type: PzS - Voltage: 24 V - Battery weight: 398 kg - Charger: Not included

Stanje: zelo dobro (rabljeno), Leto izdelave: 2024, 259 RABLJENA linija za arapski hleb. TEHNIČKI PODACI: - kapacitet 3.500-9.000 kom/h, - prečnik 15-38 cm, - maksimalno 3 reda, Hsdpfxsx Tiqfj Af Teng - radna širina 100 cm, - godina proizvodnje: 2024. OPREMA: - delilica testa - pred-fermentor - valjanje - završni fermentor - tunelska peć + 2 gorionika - rashladna transportna traka 80 m - staker / uređaji za slaganje i brojanje. VAŽNO: Dodatno, linija može biti opremljena mašinom za pakovanje: Hartmann. Navedena cena je bez PDV-a. PRIČAMO ENGLESKI, NEMAČKI, FRANCUSKI, RUSKI, UKRAJINSKI. U našoj ponudi možete pronaći pekarske peći, peći za kolica, etažne peći, konditorske peći, prodajne peći, pekarske mašine, linije za hleb, linije za zemičke, linije za peciva, linije za kroasane, mašine za bagete, mikser-mašine, mešače, valjaonice, mašine za kroasane. Pogledajte sve naše oglase.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Used pallet racking from SSI Schäfer is among the most popular solutions for efficient and safe storage. This heavy-duty racking system is ideal for warehouses, industrial, and logistics operations that require robust and durable shelving for storing Euro pallets. The proven PR600 construction provides high load capacity, maximum flexibility, and is perfectly suited for storing heavy goods. Buying used here means: tested brand quality at an especially attractive price—immediately available for new builds, conversions, or extensions of your existing racking system. Customizable: The rack frames (Type P120) can be modified to your desired height—precisely and professionally in our workshop. We supply tailor-made racking solutions for every storage requirement. PRODUCT DETAILS - Height: approx. 985 cm Hnodpfxox Thi Tj Af Tjg - Depth: approx. 105 cm - Length: approx. 3090 cm - Shelf load capacity: 3000 / 3500 kg (depending on version) - Bay width: 270 cm (3 × EPAL) - Beams: 270 cm, Type INP100 or CE110 (box section) - Beam colour: Blue - Frame type: P120, galvanized, pre-assembled - Levels: Floor + 4 - Pallet spaces: 165 incl. floor positions - Version: Used SSI Schäfer PR600 - Availability: immediately from stock, multiple sets available SCOPE OF DELIVERY: 12 × frames approx. 9.85 × 1.05 m, galvanized, pre-assembled 88 × beams approx. 270 cm (INP100 or CE110) 176 × locking pins Price: €3,744.00 net €4,455.36 gross You will receive an invoice with VAT shown separately. DELIVERY, ASSEMBLY & INSPECTION: - Nationwide delivery across Germany via our partner carriers—freight costs depend on postcode. - Professional assembly and disassembly by trained teams available on request - Rack inspections in accordance with DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers also possible PLANNING & CONSULTATION: Our planning department is happy to prepare a non-binding offer individually tailored to your requirements. Whether new build, conversion, or extension—we provide expert advice on your racking configuration. SHOWROOM: Feel free to visit our showroom! On site, you can experience our pallet racking, shelving, and other solutions first hand. Many systems are set up and ready for demonstration. Our experts are available to answer your questions and provide individual advice—we look forward to your visit! Didn't find the right solution yet? Visit our website for a quick overview of many offers & variations of our products! INTERESTED OR HAVE QUESTIONS? Contact us easily by message or phone. Our phone number can be found on our company page. ☎️ We are available Monday to Friday, 08:00 – 16:00. Alternatively, you can send us a message with your name and phone number, and we will get back to you as soon as possible.

Stanje: rabljeno, Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, nosilnost na odsek shranjevanja: 3.000 kg, skupna višina: 3.900 mm, nosilnost: 9.000 kg, število vrst polic: 3, prosta razpetina: 2.700 mm, višina zlaganja: 1.300 mm, For sale is a comprehensive pallet racking system (selective racking) by STILL, system CI 70/80 (manufacturer as per nameplate: Tegometall Int. Sales GmbH). The system consists of two upright heights (incl. 3750 mm and 5250 mm) and is configured with 3 beam levels. Ideally suited for warehousing/logistics, spare parts, or production storage. Sale as a complete package or in partial quantities by arrangement. Inventory / Scope Rack height 3750 mm: - At least 40 bays - 42 uprights (frames) Rack height 5250 mm: - 7 bays - 9 uprights (frames) Beam levels: 3 ➡️ Fully equipped, this equates to at least approx. 47 bays × 3 levels = 141 pairs of cross beams (2 beams per level) = approx. 282 beams (distribution/lengths depending on inventory) Technical specifications (according to load signs) System / Series: CI 70/80 Upright depth: 1100 mm Manufacturing years (depending on bay): including 2011 / 2012 / 2014 Beam types (mixed): - ITGI 120×50×2.0 – clear bay width 2700 mm – compartment load 3000 kg / level - ITGI 80×50×2.0 – clear bay width 1800 mm – compartment load 2000 kg / level Hnjdpfjx Sr Ukox Af Tsg Max. usable bay load: up to 9000 kg (depending on bay/beam combination, see load signs) (Note: Various bay widths/beam types and color variants available – mixed construction years/components, but system designation CI 70/80.) Condition Used, most recently in active warehouse operation. Normal signs of wear possible. Load signs are present (see photos).

Stanje: rabljeno, Okvir: 6000x1000 mm Prečke: 4300*120 mm Če potrebujete regale ali dodatke v drugih sestavah ali izvedbah, nas prosimo kontaktirajte. Ponujamo celovit program novih in rabljenih regalov ter dodatne opreme in vam z veseljem svetujemo pri načrtovanju. Dodatna oprema, kot na primer: zaščita okvirja, kotna zaščita, zaščita pred naletom, varovanje pred potiskom, iverne plošče, mrežne rešetke, zadnje mreže, globinske letve na voljo. Dostava: Prosimo vas, da za informacijo o stroških pošiljanja navedete svojo poštno številko, kraj in želeno količino artiklov. Druge storitve: Načrtovanje, montaža/demontaža regalov, odkup/prodaja Hsdepu Amhopfx Af Teng Pridržujemo si pravico do sprememb in napak pri tehničnih podatkih, informacijah in cenah ter vmesne prodaje!

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2019, obratovalne ure: 2.238 h, nosilnost: 2.000 kg, dvižna višina: 122 mm, težišče tovora: 575 mm, vrsta goriva: električni, tip droga: simpleks, gradbena višina: 1.300 mm, napetost baterije: 24 V, dolžina vilic: 1.150 mm, lastna masa: 422 kg, FRIEDMANN FORKLIFTS – PROFESSIONALLY REFURBISHED BY EXPERTS. FOR PROFESSIONALS IN ACTION Our forklifts are technically overhauled according to FEM-4.004 and the latest safety standards – for maximum quality and your safety. From the chassis to the battery, including drive, brakes, steering, and electrics – every vehicle is thoroughly inspected and reconditioned. ✔ Made in Germany – with responsibility and precision ✔ Rigorous technical inspection ✔ 400+ vehicles available ✔ Worldwide shipping & customs clearance ✔ Service & spare parts at fair prices ✔ Personal support – even after purchase Test on site and receive expert advice – we will find the right solution for you. Industrial Truck Details: Manufacturer: Jungheinrich Model: Low-Level Order Picker ERE 120 Drive type: Electric Load capacity: 2,000 kg Year of manufacture: 2019 Operating hours: 2,238 Lift height: 122 mm Mast type: Without Free lift: No Initial lift: Yes Overall width: 750 mm Overall height: 1,300 mm Fork length: 1,150 mm Unladen weight: 422 kg Load centre: 575 mm Tyres: Polyurethane Model type: ERE 120 Battery type: PzS Voltage: 24 V Battery weight: 189 kg Charger: Not included Hnsdjx H T R Nepfx Af Teg

Stanje: novo, Leto izdelave: 2025, 574 NEW production line for Arabic bread, pita. BPlus and Bakeres solutions are suitable both for small artisan bakeries with a capacity of 500-800 pcs/h as well as for large industrial bakeries with a capacity of up to 12,000 pcs/h. Our lines enable the production of flatbread in various shapes and with diameters from 130 to 400 mm. We provide full technical and technological support for the implementation of the production line and the development of your own unique technology and recipe. The lines can be single, double, or triple lane, with a weight range of 40-200 g. Each project is customized; therefore, we invite you to contact us. Currently, we have several lines implemented across Europe. Hodpfx Asi Hlp Dof Teng For more information visit: bakeres pl

Stanje: rabljeno, Nosilnost: 3200 kg/polica Prečke: 3600*140*50 mm Okvir: 8500*1100*100 mm Če potrebujete regale ali dodatno opremo v drugih sestavah ali izvedbah, nas prosimo kontaktirajte. Ponujamo širok program novih in rabljenih regalov ter dodatne opreme in vam z veseljem pomagamo pri načrtovanju. Dodatna oprema, kot na primer: Zaščita okvirja, zaščita vogalov, zaščita pred naletom, zaščite proti preboju, iverne plošče, rešetke, zadnje mreže, globinske prečke – na voljo. Dostava: Prosimo, povprašajte za stroške pošiljanja z navedbo vaše poštne številke, kraja ter želeno količino artiklov. Hodpfx Afjg Tmvho Tsng Dodatne storitve: Načrtovanje, montaža/demontaža regalov, odkup/prodaja Pridržujemo si pravico do sprememb in napak v tehničnih podatkih, informacijah in cenah, kot tudi do predčasne prodaje!

Stanje: dober (rabljeno), 782 USED Miwe Ideal Deck Oven with a Baking Surface of 15 sqm. EXTERNAL OVEN DIMENSIONS (in cm): - width: 222 - length: 288 + 52 canopy Hnsdpfx Afstr Exmj Tog - height: 270 BAKING CHAMBER DIMENSIONS (in cm): - width: 180 - length: 168 - height: 15 (2 lower retractable decks), 17 (3 upper decks) EQUIPMENT: - used gas or oil burner (new burner available upon request) We offer devices in various technical conditions and at different prices: 1. As removed from the bakery (untested). 2. After inspection with start-up warranty. 3. After refurbishment with a 6-12 month warranty. The machine ready for inspection is located at our warehouse (36-068 Bachórz, Poland). Available paid options: refurbishment / transport / installation / commissioning. The price given is net (VAT excluded). WE SPEAK ENGLISH, GERMAN, FRENCH, RUSSIAN, UKRAINIAN.

Stanje: dober (rabljeno), Nur Träger im Angebot: SSI PR350 2700*100 IPE mm, 3000 kg/Fach, 10 EUR/Stück Feralco 2740*100 mm, 2400 kg/Fach, 10 EUR/Stück Metalsystem 2700*100 mm, 2400 kg/Fach, 10 EUR/Stück Meta 2700*100 mm, 2400 kg/Fach, 10 EUR/Stück HLF 3300*140 mm, 3200 kg/Fach, 12 EUR/Stück Hilo (neuer Typ) 3100*100 mm, 2000 kg/Fach, 11 EUR/Stück Benötigen Sie Regalrahmen oder Zubehör in anderen Abmessungen oder Ausführungen? Sprechen Sie uns gerne an. Wir bieten ein umfassendes Sortiment an neuen und gebrauchten Regalsystemen und Zubehör und unterstützen Sie gerne bei der Planung. Weiteres Zubehör auf Anfrage: Rahmen-, Eck- und Anfahrschutz, Durchschubsicherungen, Spanplatten, Gitterroste, Rückwandgitter, Tiefenstege. Hnodpfx Ajq Tpk Iof Tsg Versand: Bitte fragen Sie unter Angabe Ihrer Postleitzahl, Ihres Standorts und der gewünschten Stückzahl die Frachtkosten an. Unsere weiteren Serviceleistungen: Planung, Regalaufbau und -abbau, An- und Verkauf von Regalen. Technische Änderungen, Irrtümer sowie Zwischenverkauf vorbehalten!

Stanje: dober (rabljeno), 744 USED Module Deck Oven, batch-type Matador MD 101 with a baking surface of 12 sqm. INTERNAL BAKING CHAMBER DIMENSIONS (in cm): - width: 120 - depth: 200 - height: 3 upper levels: 20, 2 lower sliding levels: 14 EXTERNAL OVEN DIMENSIONS (in cm): - width: 183 - depth: 340 - height: 235 EQUIPMENT: - gas or oil burner Hsdpforvxtzsx Af Tsng The unit is available for inspection at our warehouse (36-068 Bachórz, Poland). Paid options available: refurbishment / transport / installation / commissioning. The listed price is net. WE SPEAK ENGLISH, GERMAN, FRENCH, RUSSIAN, UKRAINIAN.

Stanje: rabljeno, Okvir: 9000x1100x85 mm 9000x1000x100 mm Prečke: 2700*120 mm z nosilnostjo police 2400 kg Če potrebujete regale ali dodatke v drugih sestavah ali izvedbah, nas prosim kontaktirajte. Ponujamo obsežen program novih in rabljenih regalov ter dodatkov in vam z veseljem pomagamo pri načrtovanju. Na voljo tudi dodatna oprema, kot na primer: okvirna zaščita, kotna zaščita, zaščita proti trkom, protiizpadne zaščite, iverne plošče, rešetkaste police, zadnje mreže, globinske prečke in drugo. Dostava: Za izračun stroškov poštnine nas kontaktirajte z vašo poštno številko, krajem in želeno količino artiklov. Hodpfx Afjhryh Ho Tong Dodatne storitve: načrtovanje, montaža/demontaža regalov, odkup/prodaja Pridržujemo si pravico do sprememb in napak v tehničnih podatkih, informacijah in cenah, kot tudi do vmesne prodaje!