Očesa Košaro Polica nakup rabljenega (718)

Stanje: rabljeno, Okvir: 6000x1000 mm Prečke: 4300*120 mm Če potrebujete regale ali dodatke v drugih sestavah ali izvedbah, nas prosimo kontaktirajte. Ponujamo celovit program novih in rabljenih regalov ter dodatne opreme in vam z veseljem svetujemo pri načrtovanju. Dodatna oprema, kot na primer: zaščita okvirja, kotna zaščita, zaščita pred naletom, varovanje pred potiskom, iverne plošče, mrežne rešetke, zadnje mreže, globinske letve na voljo. Dostava: Prosimo vas, da za informacijo o stroških pošiljanja navedete svojo poštno številko, kraj in želeno količino artiklov. Druge storitve: Načrtovanje, montaža/demontaža regalov, odkup/prodaja Gtedopu Amhepfx Afqot Pridržujemo si pravico do sprememb in napak pri tehničnih podatkih, informacijah in cenah ter vmesne prodaje!

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, skupna širina: 2.000 mm, skupna dolžina: 12.000 mm, skupna višina: 2.800 mm, skupna masa: 2.000 kg, BITO izvlečno regal - brez vsebine - Dimenzije na odlagalno površino: 2000 x 1300 mm - Skupaj 40 izvlečnih polic Gtsdpfx Ajx Tzkwofqjt Pozor: Artikel mora biti nujno prevzet med 18. in 26.02.2026 na še dogovorjen termin. FCA D-78087 Mönchweiler – naloženo na tovornjak

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack with roof beams: Hot-dip galvanized bolt system Scope of delivery: - 9 rack uprights, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms with 1,200 mm usable depth, with deflector - 9 roof beams, 1,500 mm cantilever, pre-drilled for on-site roof construction (*excluding timber purlins and trapezoidal sheets for the roof construction) - Including longitudinal and diagonal braces for 1,500 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and system can be extended at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction using IPE profiles - Surface of all components hot-dip galvanized Gjdpfx Afeh R Taqeqett - Load capacity per upright: 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof beams (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright fitted with 3 bolted cantilever arms, depth 1,200 mm, with deflector = 4 storage levels one above the other - Including longitudinal and diagonal braces with 1,500 mm center-to-center spacing - Rack length: 12,100 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with scheduling prior to delivery. Material is sensibly packed for easy unloading. The installation surface must be concrete, level, suitable for dowelling, and able to withstand the loads applied. The customer is responsible for checking and ensuring the ground condition, load-bearing capacity, and any official permits that may be required. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to occupational health and safety regulations, it is recommended that the rack uprights have at least 500 mm clearance above the top storage level.

Stanje: dober (rabljeno), Leto izdelave: 1997, Paletni vvozni regal, Ohra, 850 kg/paleta, 2.470 paletnih mest, tudi za CP1 industrijske palete – rabljeno -: Gtsdpfx Aex Tp Eisfqot Cena na lokaciji: 44.500 € (neto), vključno z demontažo itd.! Proizvajalec: Ohra Tip: vvozni regalni sistem Leto izdelave: 1997 Nosilnost na paleto: 850 kg Širina kanala: cca 1,48 m Globina kanala: cca 8,56 m Višina: cca 11 m in 8,10 m cca 68 regalnih polj skupaj 247 kanalov 25 polj s 3 kanali 43 polj s 4 kanali Kapaciteta na kanal: 10 euro palet ali 7 CP1 industrijskih palet Skupna kapaciteta: 2.470 euro palet Stanje: dobro Na voljo: takoj Lokacija: Porenje-Pfalška

Stanje: rabljeno, Leto izdelave: 2007, RA1784 Galler OMEGA Pallet Racking System Used 16600 x 5400 x 1350 mm Installed in a warehouse Godpfxsk Abbbe Afqjtt Rack height: 5,400 mm Rack depth: 1,350 mm Clear bay width: 3,200 mm Stored goods: Pallets with goods Storage depth: 1,350 mm Storage levels: 1. Goods stored on the floor 2nd to 5th levels: goods stored on pairs of beams Load capacity per pair of beams with a clear bay width of 3,200 mm and level height of 1,500 mm: 2,100 kg Bay load: 8.4 t with a column buckling length of 1,500 mm (minimum 4 bays) → All load capacities apply to evenly distributed loads. Finish: Frame: Sendzimir galvanized Beams: RAL 7035 light grey WITH SURFACE RUST SPOTS Setup: 1 unit single-sided racking row, installed against a hall wall 5 x 3,300 + 100 = total length 16,600 mm Comprising: 6 units Galler Omega Upright Frames, bolted 5,400 x 1,350 mm 40 units Galler Sigma Beams 3,200 mm 80 units Safety Pins Price net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, Würzburg Optional, if required: 2 used impact protection corners At the beginning/end and at drive-through points for protecting the rack uprights For individual, professional advice, simply get in touch with us. Contact us by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and contact for intralogistics

Leto izdelave: 2020, Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Sestoji iz: Pretočna košarna pomivalna stroj Mod.: PT-XL Proizvajalec: Winterhalter Dimenzije (Š/G/V): 735x750x1635 mm Godsx Hyqiopfx Afqstt pri odprtem pokrovu: 2235 mm 400 V / 10,2 kW Pomivalni stroj, doziranje sredstva za sijaj/pomivalnega sredstva: vgrajeno s sesalno sondo Vgrajen dozirnik čistilnega sredstva vklj. s sesalno sondo GASTRO pomivalna prha za posodo Dvoročni mešalnik z izlivom A300 Pripravljalna miza za Winterhalter PT-XL D/Š/V: 2000/770/900mm Pribor po sliki Odtokova miza za Winterhalter PT-XL D/Š/V: 1200/770/900mm

Stanje: rabljeno, Nosilnost: 3200 kg/polica Gtedpfx Afeg Tmvhsqet Prečke: 3600*140*50 mm Okvir: 8500*1100*100 mm Če potrebujete regale ali dodatno opremo v drugih sestavah ali izvedbah, nas prosimo kontaktirajte. Ponujamo širok program novih in rabljenih regalov ter dodatne opreme in vam z veseljem pomagamo pri načrtovanju. Dodatna oprema, kot na primer: Zaščita okvirja, zaščita vogalov, zaščita pred naletom, zaščite proti preboju, iverne plošče, rešetke, zadnje mreže, globinske prečke – na voljo. Dostava: Prosimo, povprašajte za stroške pošiljanja z navedbo vaše poštne številke, kraja ter želeno količino artiklov. Dodatne storitve: Načrtovanje, montaža/demontaža regalov, odkup/prodaja Pridržujemo si pravico do sprememb in napak v tehničnih podatkih, informacijah in cenah, kot tudi do predčasne prodaje!

Stanje: dober (rabljeno), 782 USED Miwe Ideal Deck Oven with a Baking Surface of 15 sqm. EXTERNAL OVEN DIMENSIONS (in cm): - width: 222 - length: 288 + 52 canopy - height: 270 BAKING CHAMBER DIMENSIONS (in cm): - width: 180 - length: 168 - height: 15 (2 lower retractable decks), 17 (3 upper decks) EQUIPMENT: Gjdpfetr Exmox Afqjtt - used gas or oil burner (new burner available upon request) We offer devices in various technical conditions and at different prices: 1. As removed from the bakery (untested). 2. After inspection with start-up warranty. 3. After refurbishment with a 6-12 month warranty. The machine ready for inspection is located at our warehouse (36-068 Bachórz, Poland). Available paid options: refurbishment / transport / installation / commissioning. The price given is net (VAT excluded). WE SPEAK ENGLISH, GERMAN, FRENCH, RUSSIAN, UKRAINIAN.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack with roof supports: Hot-dip galvanized bolted system Scope of delivery: 9 rack uprights, height 4,230 mm with foot section, usable depth 1,200 mm 27 cantilever arms with usable depth 1,200 mm, with deflectors 9 roof beams with 1,500 mm cantilever, pre-drilled for customer-supplied roofing (*Without timber purlins and trapezoidal sheets for roofing) Including longitudinal and diagonal bracing for 1,500 mm upright spacing Including fasteners (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and expansion possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright 2,700 kg plus roof, wind, and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof supports (maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, 1,200 mm deep, with deflectors = 4 storage levels stacked - Including longitudinal and diagonal bracing at 1,500 mm upright spacing - Rack length: 12,100 mm - Including fasteners (excluding floor anchors) - Supplied with assembly instructions and C4 load plates according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight shipping with prior delivery notification. The material is packed appropriately to enable easy unloading. The floor must be concrete, level, capable of being doweled, and able to bear the acting loads. The customer is responsible for checking and ensuring the floor condition, load capacity, and any necessary local permits. Godpfsmhhy Nsx Afqott The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to trade association guidelines, the rack uprights should protrude at least 500 mm above the top storage level.

Stanje: rabljeno, Leto izdelave: 2003, Funkcionalnost: nepreverjeno, nosilnost na konzolno roko: 1.000 kg, nosilnost na stojalo: 4.000 kg, We are offering this used G. SIMON & Co. heavy-duty cantilever racking, year of manufacture 2003. Type: Order No.: 2953 Year of manufacture: 2003 Maximum load per arm: 1,000 kg Maximum load per upright side: 4,000 kg If you have any questions or require further information, please feel free to contact us via message or phone. For sale is a heavy-duty double-sided cantilever rack by G. SIMON & Co. Lagertechnik (year 2003). This system is ideal for storing long goods such as pipes, profiles, bar stock, mouldings, panels, etc. The rack is robustly constructed and designed for high load capacities. Technical Data: Godpfsx Stcpjx Afqstt Manufacturer: G. SIMON & Co. Lagertechnik (Hamburg) Year of manufacture: 2003 Order No.: 2953 Design: double-sided Cantilever arms: approx. 8 per rack (4 per side) Load capacity: 1,000 kg per arm Max. load capacity: 4,000 kg per upright side Scope of delivery: 1x double-sided cantilever rack incl. approx. 8 cantilever arms (supply as per photos/inventory). Note: Measurements (height / arm length / bay length) on request or after re-measurement.

Stanje: zelo dobro (rabljeno), Shelf panels, shelves, shelf panel - Material: galvanized - Dimensions: 765/995/H37 mm - Quantity: 30 shelf panels available - Price: for complete lot - Transport dimensions: 1200/800/H1330 mm Gedpfjghm Svex Afqjtt - Transport weight: 224 kg

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Used pallet racking from SSI Schäfer is among the most popular solutions for efficient and safe storage. This heavy-duty racking system is ideal for warehouses, industrial, and logistics operations that require robust and durable shelving for storing Euro pallets. The proven PR600 construction provides high load capacity, maximum flexibility, and is perfectly suited for storing heavy goods. Buying used here means: tested brand quality at an especially attractive price—immediately available for new builds, conversions, or extensions of your existing racking system. Customizable: The rack frames (Type P120) can be modified to your desired height—precisely and professionally in our workshop. We supply tailor-made racking solutions for every storage requirement. PRODUCT DETAILS - Height: approx. 985 cm - Depth: approx. 105 cm - Length: approx. 3090 cm - Shelf load capacity: 3000 / 3500 kg (depending on version) - Bay width: 270 cm (3 × EPAL) - Beams: 270 cm, Type INP100 or CE110 (box section) - Beam colour: Blue - Frame type: P120, galvanized, pre-assembled - Levels: Floor + 4 - Pallet spaces: 165 incl. floor positions - Version: Used SSI Schäfer PR600 - Availability: immediately from stock, multiple sets available SCOPE OF DELIVERY: 12 × frames approx. 9.85 × 1.05 m, galvanized, pre-assembled 88 × beams approx. 270 cm (INP100 or CE110) 176 × locking pins Gtsdex Thi Tjpfx Afqot Price: €3,744.00 net €4,455.36 gross You will receive an invoice with VAT shown separately. DELIVERY, ASSEMBLY & INSPECTION: - Nationwide delivery across Germany via our partner carriers—freight costs depend on postcode. - Professional assembly and disassembly by trained teams available on request - Rack inspections in accordance with DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers also possible PLANNING & CONSULTATION: Our planning department is happy to prepare a non-binding offer individually tailored to your requirements. Whether new build, conversion, or extension—we provide expert advice on your racking configuration. SHOWROOM: Feel free to visit our showroom! On site, you can experience our pallet racking, shelving, and other solutions first hand. Many systems are set up and ready for demonstration. Our experts are available to answer your questions and provide individual advice—we look forward to your visit! Didn't find the right solution yet? Visit our website for a quick overview of many offers & variations of our products! INTERESTED OR HAVE QUESTIONS? Contact us easily by message or phone. Our phone number can be found on our company page. ☎️ We are available Monday to Friday, 08:00 – 16:00. Alternatively, you can send us a message with your name and phone number, and we will get back to you as soon as possible.

Stanje: dober (rabljeno), Nur Träger im Angebot: SSI PR350 2700*100 IPE mm, 3000 kg/Fach, 10 EUR/Stück Feralco 2740*100 mm, 2400 kg/Fach, 10 EUR/Stück Metalsystem 2700*100 mm, 2400 kg/Fach, 10 EUR/Stück Meta 2700*100 mm, 2400 kg/Fach, 10 EUR/Stück HLF 3300*140 mm, 3200 kg/Fach, 12 EUR/Stück Hilo (neuer Typ) 3100*100 mm, 2000 kg/Fach, 11 EUR/Stück Benötigen Sie Regalrahmen oder Zubehör in anderen Abmessungen oder Ausführungen? Sprechen Sie uns gerne an. Wir bieten ein umfassendes Sortiment an neuen und gebrauchten Regalsystemen und Zubehör und unterstützen Sie gerne bei der Planung. Weiteres Zubehör auf Anfrage: Rahmen-, Eck- und Anfahrschutz, Durchschubsicherungen, Spanplatten, Gitterroste, Rückwandgitter, Tiefenstege. Versand: Bitte fragen Sie unter Angabe Ihrer Postleitzahl, Ihres Standorts und der gewünschten Stückzahl die Frachtkosten an. Gjdpfx Aeq Tpk Iefqjtt Unsere weiteren Serviceleistungen: Planung, Regalaufbau und -abbau, An- und Verkauf von Regalen. Technische Änderungen, Irrtümer sowie Zwischenverkauf vorbehalten!

Stanje: dober (rabljeno), 744 USED Module Deck Oven, batch-type Matador MD 101 with a baking surface of 12 sqm. INTERNAL BAKING CHAMBER DIMENSIONS (in cm): - width: 120 - depth: 200 - height: 3 upper levels: 20, 2 lower sliding levels: 14 EXTERNAL OVEN DIMENSIONS (in cm): - width: 183 - depth: 340 - height: 235 EQUIPMENT: - gas or oil burner The unit is available for inspection at our warehouse (36-068 Bachórz, Poland). Paid options available: refurbishment / transport / installation / commissioning. The listed price is net. Gtodpfxorvxtzj Afqjt WE SPEAK ENGLISH, GERMAN, FRENCH, RUSSIAN, UKRAINIAN.

Stanje: rabljeno, Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, nosilnost na odsek shranjevanja: 3.000 kg, skupna višina: 3.900 mm, nosilnost: 9.000 kg, število vrst polic: 3, prosta razpetina: 2.700 mm, višina zlaganja: 1.300 mm, For sale is a comprehensive pallet racking system (selective racking) by STILL, system CI 70/80 (manufacturer as per nameplate: Tegometall Int. Sales GmbH). The system consists of two upright heights (incl. 3750 mm and 5250 mm) and is configured with 3 beam levels. Ideally suited for warehousing/logistics, spare parts, or production storage. Sale as a complete package or in partial quantities by arrangement. Inventory / Scope Rack height 3750 mm: - At least 40 bays - 42 uprights (frames) Rack height 5250 mm: - 7 bays - 9 uprights (frames) Beam levels: 3 ➡️ Fully equipped, this equates to at least approx. 47 bays × 3 levels = 141 pairs of cross beams (2 beams per level) = approx. 282 beams (distribution/lengths depending on inventory) Technical specifications (according to load signs) Gsdpfox Sr Uksx Afqjtt System / Series: CI 70/80 Upright depth: 1100 mm Manufacturing years (depending on bay): including 2011 / 2012 / 2014 Beam types (mixed): - ITGI 120×50×2.0 – clear bay width 2700 mm – compartment load 3000 kg / level - ITGI 80×50×2.0 – clear bay width 1800 mm – compartment load 2000 kg / level Max. usable bay load: up to 9000 kg (depending on bay/beam combination, see load signs) (Note: Various bay widths/beam types and color variants available – mixed construction years/components, but system designation CI 70/80.) Condition Used, most recently in active warehouse operation. Normal signs of wear possible. Load signs are present (see photos).

Stanje: novo, Leto izdelave: 2022, approx. 14 linear meters, H: 650 cm, compartment load: 3000 kg, pallet racking, heavy-duty racks, high-bay racks, industrial shelving, immediately available from stock Specifications: - Height: approx. 650 cm - Depth: approx. 110 cm - Length: approx. 14 linear meters - Load capacity: 3000 kg per compartment - Frames galvanized - Beams: 270 x 14 x 5 cm, T30 - Beams in orange - Brand new BLT / PR65 - Manufactured in Europe & tested according to the latest DIN EN 15512 standard - 100% quality at the best price Rack consists of: - 06 x frames approx. 650 cm x 110 cm, disassembled - 30 x beams approx. 270 x 14 x 5 cm, T30 - 60 x locking pins - Levels: floor + 3 - 60 pallet spaces including floor level -- IMMEDIATELY AVAILABLE IN MULTIPLE QUANTITIES -- Price: €2,400.00 net plus statutory VAT You will receive an invoice with VAT shown separately. Frame pre-assembly is available by us for a small surcharge of €12.50 net per piece. Gjdpsx Thigofx Afqjtt Transport: Delivery upon request by our partner forwarder, cost depends on postal code. Installation: Our trained staff are available to assist you with the professional assembly and disassembly of your warehouse equipment as required. Our recommendation: Let us know your requirements ... We are happy to support you in realizing your projects, from planning and ordering to installation.

Stanje: rabljeno, Okvir: 9000x1100x85 mm 9000x1000x100 mm Prečke: Gsdpfx Aohryh Hsfqjtt 2700*120 mm z nosilnostjo police 2400 kg Če potrebujete regale ali dodatke v drugih sestavah ali izvedbah, nas prosim kontaktirajte. Ponujamo obsežen program novih in rabljenih regalov ter dodatkov in vam z veseljem pomagamo pri načrtovanju. Na voljo tudi dodatna oprema, kot na primer: okvirna zaščita, kotna zaščita, zaščita proti trkom, protiizpadne zaščite, iverne plošče, rešetkaste police, zadnje mreže, globinske prečke in drugo. Dostava: Za izračun stroškov poštnine nas kontaktirajte z vašo poštno številko, krajem in želeno količino artiklov. Dodatne storitve: načrtovanje, montaža/demontaža regalov, odkup/prodaja Pridržujemo si pravico do sprememb in napak v tehničnih podatkih, informacijah in cenah, kot tudi do vmesne prodaje!

Stanje: novo, Leto izdelave: 2022, approx. 100.16 running meters, H: 450 cm, shelf load: 3,000 kg, pallet racking, heavy-duty racking, high-bay racking, industrial shelving, racks available immediately from stock Details: - Height: approx. 450 cm - Depth: approx. 110 cm - Length: approx. 100.16 running meters - Load capacity: 3,000 kg per shelf level - Upright frames galvanized - Beams: 270 x 14 x 5 cm, T30 - Beams in orange - New BLT / PR45 - Manufactured in Europe and tested according to the current DIN EN 15512 standard - 100% quality at the best price Rack configuration: - 37 x Upright frames approx. 450 x 110 cm, disassembled - 144 x Beams approx. 270 x 14 x 5 cm, T30 - 288 x Locking pins - Levels: floor + 2 - 324 pallet spaces including floor level — IMMEDIATELY AVAILABLE IN MULTIPLE QUANTITIES — Price: €10,900 net plus legally applicable VAT You will receive an invoice with VAT shown separately Gsdpfjx Thiajx Afqott Frame pre-assembly can be carried out by us for a small additional charge of €12.50/net per piece Transport: Delivery available on request via our partner freight forwarder – costs depend on postal code Assembly: Our qualified personnel are available to assist you with the professional installation and dismantling of your warehouse equipment Our recommendation: Let us know your requirements… We are happy to support you in realizing your projects, from planning and ordering to installation.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, The used Stow pallet racking system is a top-quality heavy-duty rack designed for industrial storage – with approx. 33.30 m running length and 7 m height. Ideal for logistics centers, warehouses, and craft businesses that require maximum storage capacity on a minimal footprint. Manufactured in Europe, this racking system stands for stability, quality, and durability. Now available directly from stock – perfect for companies with high goods turnover. Customizable dimensions: The uprights can be individually modified to your desired height – precisely and professionally in our workshop. Contact us – we offer tailor-made solutions for your storage requirements. PRODUCT DETAILS: - Height: approx. 700 cm - Depth: approx. 110 cm - Length: approx. 3330 cm - Shelf load: 3200 kg - Beams: 360 x 14.5 x 5 cm - Beam color: RAL2004 (orange powder-coated) - Uprights: 700 x 110 cm, RAL5015 (blue powder-coated), pre-assembled - Levels: floor + 3 - Pallet positions: 144 including floor level - Version: Used Stow racking system SCOPE OF DELIVERY: - 010 x uprights (approx. 700 x 110 cm), pre-assembled - 054 x beams (approx. 360 x 14.5 x 5 cm) - 108 x safety pins Price: EUR 3,452.00 net EUR 4,107.88 gross You will receive an invoice with VAT shown. Gsdpfx Aex Thhvsfqstt DELIVERY, ASSEMBLY & INSPECTION: - Delivery throughout Germany by our partner shipping companies – freight costs depend on your postal code - Professional assembly and disassembly by trained teams available as an option - Rack inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers also possible PLANNING & CONSULTATION: Our planning department will be happy to prepare a non-binding quote for you – tailored to your specific requirements. Whether you need a new build, conversion or extension – we provide expert consultation for your racking configuration. SHOWROOM: Feel free to visit us in our showroom! On site, you can get a comprehensive impression of our pallet racking, warehouse shelving, and other solutions. Many systems are assembled and ready for direct inspection. Our technical consultants are happy to answer your questions and offer individual advice – we look forward to your visit! Haven't found the right solution yet? Visit our website for a quick overview of many offers & product variations! INTERESTED OR HAVE QUESTIONS? Contact us easily by message or phone. Our phone number is available on our company page. ☎️ We are available by phone Monday to Friday, 8:00 am – 4:00 pm. Alternatively, you can send us a message with your name and number, and we will get back to you as soon as possible.

Stanje: novo, Leto izdelave: 2022, Approx. 100.16 linear metres, H: 650 cm, compartment load: 3,000 kg, pallet racking, heavy-duty racking, high-bay racking, industrial shelving, racks available immediately from stock Specifications: - Height: approx. 650 cm - Depth: approx. 110 cm - Length: approx. 100.16 linear metres - Load capacity: 3,000 kg per shelf level - Uprights galvanised - Beams: 270 x 14 x 5 cm, T30 - Beams in orange - Brand new BLT / PR65 - Manufactured in Europe and tested according to the current DIN EN 15512 standard - 100% quality at the best price Gtodpsx Thhisfx Afqjt Racking system comprises: - 37 x uprights approx. 650 x 110 cm, disassembled - 216 x beams approx. 270 x 14 x 5 cm, T30 - 432 x safety pins - Levels: floor + 3 - 432 pallet spaces incl. floor locations -- IMMEDIATELY AVAILABLE IN MULTIPLE UNITS -- Price: 16,000.00 € net plus statutory VAT An invoice with VAT shown separately will be issued Frame pre-assembly can be carried out by us for a small surcharge of €12.50 net per unit Transport: Delivery can be arranged on request by our partner forwarding agent; costs are postcode-dependent Installation: Our trained staff are available to assist you with professional installation and dismantling of your warehouse equipment where required Our recommendation: Let us know your requirements… We are happy to assist you with the realisation of your projects, from planning and ordering to installation.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, The Dexion P90 pallet racking system consists of a combination of new and used components: The upright frames are brand new, while the beams are from thoroughly inspected used stock. This system is ideal for industrial storage—with a total rack length of approx. 30.80 m and a height of 6.5 m. Whether for warehouses, logistics centers, or workshops, this heavy-duty rack ensures maximum stability and space-saving storage capacity. Immediately available from stock—perfect for businesses with high inventory turnover and specific needs. Customizable to your requirements: The uprights can be precisely adapted to your desired height—professionally adjusted in our workshop. Contact us—we offer tailored solutions for your storage requirements. PRODUCT DETAILS: - Height: approx. 650 cm - Depth: approx. 110 cm - Length: approx. 3080 cm - Shelf load: 3000 kg - Beams: 270 x 10 x 5 cm (used) - Beam colour: galvanised - Uprights: 650 x 110 cm, galvanised, pre-assembled (new) - Levels: floor + 3 - Pallet spaces: 132 including floor spaces Gtjdpfox Thg Esx Afqjt - Version: combination of new and used components DELIVERY SCOPE: - 12 x uprights (approx. 650 x 110 cm), pre-assembled (new) - 66 x beams (approx. 270 x 10 x 5 cm) (used) - 132 x safety pins Price: €3,360.00 net €3,998.40 gross You will receive an invoice with VAT shown separately. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery within Germany via our partner carrier—freight costs depend on postcode - Professional assembly and disassembly by trained teams available on request - Rack inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers also possible PLANNING & CONSULTATION: Our planning department will be happy to provide you with a non-binding, customised quote based on your requirements. Whether for new construction, modification, or expansion projects—we support you with expert advice on configuring your racking systems. SHOWROOM: Feel free to visit our showroom! See our pallet racking, warehouse shelving, and other storage solutions firsthand. Many systems are assembled and on display. Our expert advisors are available for your questions and to provide individual consultation—we look forward to your visit! Not found the right solution yet? Visit our website for a quick overview of many offers and variations of our products! INTERESTED OR HAVE QUESTIONS? Simply contact us by message or phone. You can find our phone number on our company page. ☎️ We are available by phone Monday to Friday, 8:00 a.m. to 4:00 p.m. Alternatively, send us a message with your name and phone number, and we’ll get back to you as soon as possible.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, The Dexion P90 pallet racking system consists of a combination of new and used components: The upright frames are brand new, while the beams are from thoroughly inspected used stock. This system is ideal for industrial storage—with a total rack length of approx. 30.80 m and a height of 6.5 m. Whether for warehouses, logistics centers, or workshops, this heavy-duty rack ensures maximum stability and space-saving storage capacity. Immediately available from stock—perfect for businesses with high inventory turnover and specific needs. Customizable to your requirements: The uprights can be precisely adapted to your desired height—professionally adjusted in our workshop. Contact us—we offer tailored solutions for your storage requirements. PRODUCT DETAILS: - Height: approx. 650 cm - Depth: approx. 110 cm - Length: approx. 3080 cm - Shelf load: 3000 kg - Beams: 270 x 10 x 5 cm (used) - Beam colour: galvanised - Uprights: 650 x 110 cm, galvanised, pre-assembled (new) - Levels: floor + 3 - Pallet spaces: 132 including floor spaces Gtjdpfx Afjx Thgreqot - Version: combination of new and used components DELIVERY SCOPE: - 12 x uprights (approx. 650 x 110 cm), pre-assembled (new) - 66 x beams (approx. 270 x 10 x 5 cm) (used) - 132 x safety pins Price: €3,360.00 net €3,998.40 gross You will receive an invoice with VAT shown separately. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery within Germany via our partner carrier—freight costs depend on postcode - Professional assembly and disassembly by trained teams available on request - Rack inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers also possible PLANNING & CONSULTATION: Our planning department will be happy to provide you with a non-binding, customised quote based on your requirements. Whether for new construction, modification, or expansion projects—we support you with expert advice on configuring your racking systems. SHOWROOM: Feel free to visit our showroom! See our pallet racking, warehouse shelving, and other storage solutions firsthand. Many systems are assembled and on display. Our expert advisors are available for your questions and to provide individual consultation—we look forward to your visit! Not found the right solution yet? Visit our website for a quick overview of many offers and variations of our products! INTERESTED OR HAVE QUESTIONS? Simply contact us by message or phone. You can find our phone number on our company page. ☎️ We are available by phone Monday to Friday, 8:00 a.m. to 4:00 p.m. Alternatively, send us a message with your name and phone number, and we’ll get back to you as soon as possible.

Stanje: novo, Leto izdelave: 2022, approx. 14 linear meters, H: 550 cm, Bay load: 3,000 kg, pallet racking, heavy-duty racking, high-bay racking, industrial shelving, immediate availability from stock Data: - Height: approx. 550 cm - Depth: approx. 110 cm Gtjdpfox Thgfjx Afqjt - Length: approx. 14 linear meters - Load capacity: 3,000 kg per bay - Uprights galvanized - Beams: 270 x 14 x 5 cm, T30 - Beams in orange - New product BLT / PR55 - Manufactured in Europe & tested in accordance with the latest DIN EN 15512 standard. - 100% quality at the best price. Rack consists of: - 06 x Uprights approx. 550 cm x 110 cm, disassembled - 30 x Beams approx. 270 x 14 x 5 cm, T30 - 60 x Safety pins - Levels: Floor + 3 - 60 pallet spaces incl. floor positions -- IMMEDIATELY AVAILABLE IN MULTIPLE UNITS -- Price: €2,220.00 net plus applicable VAT You will receive an invoice showing the VAT. Frame pre-assembly can be carried out by us for a small surcharge of €12.50/net per unit. Transport: Delivery can be arranged by our partner freight company upon request; costs depend on the postal code. Assembly: Our trained personnel are available to assist with professional assembly and disassembly of your equipment if required. Our recommendation: Let us know your requirements... We are happy to help you realize your projects, from planning to ordering to assembly.

Stanje: novo, Leto izdelave: 2022, Approx. 100.16 linear meters, H: 250 cm, shelf load: 3,000 kg, pallet racks, heavy-duty racks, high racks, industrial shelving, racks available immediately from stock. Specifications: - Height: approx. 250 cm - Depth: approx. 110 cm - Length: approx. 100.16 linear meters - Shelf load: 3,000 kg - Uprights galvanized - Beams 270 x 14 x 5 cm, type T30 - Beams painted orange Gtedpfx Aex Thf Uofqst - Brand new BLT / PR25 - Manufactured in Europe & tested according to current standard DIN EN 15512. - 100% quality at the best price. Rack consists of: - 37 x uprights approx. 250 cm x 110 cm, disassembled - 144 x beams approx. 270 x 14 x 5 cm, T30 - 288 x locking pins - Levels: floor + 2 - 324 pallet spaces including floor level -- IMMEDIATELY AVAILABLE IN MULTIPLE QUANTITIES -- Price: €8,690.00 net plus legally applicable VAT. You will receive an invoice with VAT shown separately. Frame pre-assembly can be carried out by us for a small additional charge of €12.50 net per unit. Transport: Delivery can be arranged via our partner forwarding company if desired; costs depend on postal code. Assembly: Our trained staff are happy to assist you with professional assembly and disassembly of your warehouse equipment as needed. Our recommendation: Let us know your requirements… We are happy to support your project from planning and ordering to final installation.

Stanje: novo, Leto izdelave: 2022, Approx. 100.16 running meters, H: 550 cm, shelf load: 3,000 kg, pallet racking, heavy-duty racking, high-bay racking, industrial shelving, racks immediately available from stock Specifications: - Height: approx. 550 cm - Depth: approx. 110 cm - Length: approx. 100.16 running meters - Load capacity: 3,000 kg per shelf compartment - Uprights galvanized - Beams 270 x 14 x 5 cm, T30 - Beams in orange - New BLT / PR55 products - Manufactured in Europe & tested according to current DIN EN 15512 standard - 100% quality at the best price Shelving includes: - 037 x uprights approx. 550 cm x 110 cm, disassembled - 216 x beams approx. 270 x 14 x 5 cm, T30 - 432 x safety pins - Levels: floor + 3 - 432 pallet spaces incl. ground level locations Gedpjx Thfujfx Afqstt -- IMMEDIATELY AVAILABLE IN MULTIPLE QUANTITIES -- Price: €14,930.00 net plus statutory VAT You will receive an invoice with VAT shown. Pre-assembly of the frames can be carried out by us for a small surcharge of €12.50/net per piece. Transport: Delivery can be arranged by our partner forwarding company upon request; costs are dependent on postcode. Assembly: Our trained personnel are available to assist you with professional assembly and disassembly of your warehouse equipment if required. Our recommendation: Let us know your requirements... We are happy to support you in realizing your projects, from planning and ordering through to installation.