Očesa Košaro Polica nakup rabljenega (681)

Stanje: zelo dobro (rabljeno), Rabljene regalne police, vtični regali Stojala tip S3 Višina: cca 446 cm (možno tudi skrajšati) Globina: 50 cm Dolge prečke tip S1 Fjdexxdkujpfx Afloft Dolžina: 150 cm Dvonadstropne police 90 cm + 60 cm Cena velja za 11 stojal in 100 polic, skupaj 15 m regala Na voljo večkrat Možna dostava

Stanje: dober (rabljeno), Included in this package: 11 x upright frames, each 700 cm x 110 cm (grey) 60 x beams, each 3600 mm (grey) 120 x safety pins This results in a racking row with 10 bays, each with 3 storage levels, providing a total of 160 pallet spaces (800 kg per pallet). Fedpfx Ajrhkvnofloft Manufacturer: Bito Type: P4 Condition: used, good condition Height: 700 cm Length: approx. 1 x 37.10 m Rack depth: 110 cm Bracing: bolted Beam length: 3.60 m Compartment load: 3200 kg Bay load: 9600 kg Pallet spaces: 96 Accessories such as - Floor anchors - Connectors - Load warning signs - Impact protection barriers - Guard rails - Wire mesh decks - Rear mesh grid - Depth bars - Safety barriers and much more... Simply contact us with your inquiry!

Stanje: novo, Leto izdelave: 2025, Pallet racking 2 – 7m high, beams available in lengths 1.80m / 2.70m / 3.60m, 1,000 kg per pallet – new product. Prices ex works / per unit (net)! Sales / transport from Serbia only make sense for full or near-full truckload orders. Delivery time on request. CE certification available Frame depth: 1.10m Frame bracing: bolted Location: Serbia Frames: Fjdpfxeu Spu Te Aflsft NO DESCRIPTION SIZE (mm) THICKNESS (mm) WEIGHT (kg) PRICE (EUR/unit) 1 Vertical frame 2000*1100 2.00 30.00 €46.50 2 Vertical frame 2500*1100 2.00 37.50 €58.00 3 Vertical frame 3000*1100 2.00 45.00 €70.30 4 Vertical frame 3500*1100 2.00 52.50 €82.70 5 Vertical frame 4000*1100 2.00 60.00 €93.00 6 Vertical frame 4500*1100 2.00 67.50 €105.40 7 Vertical frame 5000*1100 2.00 75.00 €117.75 8 Vertical frame 5500*1100 2.00 82.50 €128.20 9 Vertical frame 6000*1100 2.00 90.00 €140.50 10 Vertical frame 6500*1100 2.00 97.50 €152.90 11 Vertical frame 7000*1100 2.00 105.00 €164.30 Beams: NO DESCRIPTION SIZE (mm) THICKNESS (mm) WEIGHT (kg) PRICE (EUR/unit) 1 Beam 150*50*3600 2.50 29.60 €46.00 2 Beam 120*40*2700 2.00 15.50 €24.40 3 Beam 120*40*1850 2.00 11.10 €17.90

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 14.000 km, moč: 102,97 kW (140,00 KM), vrsta goriva: dizel, vrsta prenosa: mehanski, emisijski razred: Euro 6, število sedežev: 2, Leto izdelave: 2020, Oprema: ABS, airbag, centralno zaklepanje, elektronski program stabilnosti (ESP), garancija za rabljena vozila, klimatska naprava, nadzor oprijema, računalnik na krovu, sistem za imobilizacijo, IVECO DAILY 35 S14 2.3 140 KM Ffedoxv Dbuopfx Aflet Leto 2020 Prevoženih km: 14.000 EURO 6 D-TEMP Nadgradnja s košaro Model: 141 TLE France Elevatour Delovna višina: 12,20 m + operater Delovne ure: 91 Vozilo v stanju kot novo Dodatki: tempomat, vzvratna kamera, klimatska naprava, priključna gred Garancija: 24 mesecev Vozilo bo registrirano z italijanskimi tablicami (postopek v teku)

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, število predalov: 12, trajanje garancije: 12 meseci, skupna višina: 2.280 mm, skupna širina: 2.740 mm, skupna dolžina: 7.399 mm, dolžina vilic: 140 mm, We offer a storage rack for storing quartz sintered slabs with dimensions of 330 cm x 170 cm. Our company designs and manufactures storage racks for various types of sheet material. Technical specifications of the S140-12 sintered chipboard storage rack: Fsdpfevf Im Rox Afljft - Number of drawers: 12 - Maximum panel size: 1800 x 3450 mm - Load capacity per drawer: 1,500 kg - Loading bay width: 140 mm - Total rack width: 2,740 mm - Orientation (tilting side of drawers): universal (depending on installation) - Number of positioner rollers per drawer: 8, ball bearing mounted - Structure: modular (combinable) - Material of front drawer wheel: polyamide (floor-friendly) We export our products to more than 30 countries worldwide. Please visit

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 400.000 mm, skupna širina: 1.200 mm, skupna višina: 2.050 mm, število vrst polic: 400, dolžina police: 1.200 mm, Spoštovani partnerji! Na prodaj je skupaj 400 metrov policnih nosilcev, višine 185-205 cm in širine 85-120 cm, z mrežno zadnjo steno, 370 kosov nosilnih palic, 383 kosov nosilnih nog, 1909 kovinskih polic velikosti 40*85-120 cm, 3412 kosov nosilnih elementov za police, 21.252 tržnih kavljev dolžine 30+40 cm, 8.371 plastičnih razdelilnikov za police, 1.000 lepilnih policnih vodil za razdelilnike, 385 cenovnih letvic, na policah še dodatnih 500-600 kosov, Fjdpfxsxn Tpxo Afloft 3 pravokotni stojala za očala, 1 premično stojalo za cvetje s 13 plastičnimi vazami. 4.000 kosov plastičnih obešalnikov s sponko ali kavljem. Skupna cena: 9.500.000 Ft + DDV Prevzem po dogovoru. Sándor Péter

Stanje: novo, Leto izdelave: 2025, Oven operated with natural gas for powder coating applications. The oven is designed for the polymerization of powder coatings. It is equipped with the latest heat exchanger, made entirely of stainless steel (AISI 1.4301), offering exceptionally high efficiency. Working dimensions (mm): 1500 (W) x 9000 (L) x 2200 (H) Technical specifications: - Power supply: 400V 50Hz - 2 x Riello 90 kW burners - Operating temperature: 210°C - Maximum temperature: 230°C - Premium thermal insulation: 150 mm Ffodpfx Aefktipoflet - Baffle plate in the center of the oven for a possible 50/50 sectioning Equipment: - Overhead transport system - Hot air circulation (ensures uniform temperature throughout the oven and accelerates heating of the parts) - Safe opening and closing locks - Timer module - Thermoregulator (controls and maintains internal temperature at set level) - Rails for easy transport of the oven BUMEX SP. Z O.O. – Your reliable choice. - High-quality machines available on the market - Professional consultation and support - Warranty - Warranty and post-warranty service - Complete technical documentation - 100% customer satisfaction - All BUMEX SP. Z O.O. machines are CE-certified We offer our own transport – prices are quoted individually per offer. We provide invoices with VAT indicated. Short delivery times! Machines can be ordered in various custom configurations and dimensions. Please feel free to contact us.

Stanje: novo, Leto izdelave: 2024, New item, price plus VAT. 5 uprights, each 3.00m x 1.10m, PLFB 16 solid, pre-assembled 16 beams, each 2.70m PNB 0413 32 locking pins Results in a racking row with 4 bays and 2 levels + floor storage space = 27 pallet spaces Manufacturer: Stow Type: Pallet racking Condition: NEW Height: 3.00 m Length: approx. 11.30 m Rack depth: 1.10 m Bracing: bolted Beam length: 2.70 m Load per level: 3,000 kg Load per bay: 6,000 kg Pallet spaces: 27 Certification: Up to seismic zone 1 Immediately available ex stock! Shipping available upon providing delivery address Also available in large quantities at project prices! Stock item Frames from 2000-12000mm Beams 190cm - 270cm - 360cm Load per level up to 4000kg Accessories such as: Ffsdpfjq I R T Rox Aflot Floor anchoring Connectors Load rating signs Impact protectors Guide rails Wire mesh decking Rear mesh panels Depth bars Safety barriers And much more... Just ask us for a quote!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, nosilnost na odsek shranjevanja: 600 kg, Prodam rešetke WEMA v idealnem stanju Ffjdpfxjxmkzpe Aflst - 1800 kosov - teža: 20 kg - dimenzije: 99,5 cm / 88,3 cm - oko: 35/35 mm

Stanje: rabljeno, Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, Offering here a large quantity of warehouse shelving from business liquidation. Fsdpfx Aswh Rxyjflsft The shelves have been regularly inspected and are in very good condition. Loading of the shelves onto transport can be provided free of charge on site.

Leto izdelave: 2019, Stanje: novo, Stroj je zasnovan za izdelavo varjenih panelnih mrež, širine 2150 mm in dolžine 6000 mm, z razmakom med vzdolžnimi žicami 150 mm, z razmakom med prečnimi žicami od 25 do 300 mm in premerom žice od 4 do 8 mm. Osnovni deli stroja: 1. Odvitje za vzdolžno žico. 2. Ravnalo žic. 3. Enota za vlečenje vzdolžnih žic z zanko. 4. Varilna enota. 5. Škarje. 6. Obratnik s skladiščnikom panelov. 7. Energetska elektro omara. 8. Krmilna omara. Stroj je nov! Ffedpfx Afed N Hvqelst

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, FRUIT SHELF VEGETABLE SHELF SALES SHELF EXCELLENT CONDITION used & good Our offer is aimed at dealers, commercial traders, and public institutions. Item No.: VKRegal Manufacturer: unknown Used item in good condition Dimensions: 245 x 100 x 150 cm (W x D x H) Price stated for one fruit shelf double unit, each 2.45 m length, for collection from warehouse 47441 Moers. Price is for one double shelf unit with neutral advertising panel—as shown in the original photo. Ffjdper Dtg Tofx Afljt Inspection is expressly offered. More equipment in stock see photos or request by phone General Terms: We offer items here from various acquisitions, which we describe as accurately as possible and present with informative photos. No further details about the item can be provided. We offer the possibility to view the item by appointment on Tuesdays and Thursdays between 9 am and 4 pm. The item can be taken immediately if required. We can only respond to inquiries about this item if you provide us with a phone number due to time constraints. Unless explicitly described otherwise, this offer concerns USED GOODS. Items have been visually inspected and are technically fine as far as can be assessed. All prices given are net prices. All offers ex-stock 47441 Moers. If you require shipping, please contact us to discuss packaging and shipping costs. All dimensions are approximate.

Stanje: novo, - the classic fruit press for fruit processing Ffjdpfjb Ncwnox Afljt Nominal capacity up to 180 kg/h Motor power 1.1 (1.5) kW (HP) Electrical connection 400V 50Hz (3-phase) Electrical protection 16 A Length 1078 mm Width 800 mm Height 1700 mm Filling height 1142 mm Weight 185 kg Juice pan made of polystyrene, basket in 1.4301 / AISI 304 Pressing force 16.1 t Pressing pressure 320 bar Juice yield up to 65 % Juice outlet connection ø30mm Juice outlet height 480 mm Pulp discharge height 642 mm Scope of delivery: 1 press bag 60 l, 3 filter cloths ø38cm, 3 pressing inserts made of acacia wood ø38cm

Stanje: dober (rabljeno), 781 USED Winkler Columbus Deck Oven with a baking surface of 10 sqm. EXTERNAL OVEN DIMENSIONS (in cm): - Width: 152 - Length: 281 + 14 (hood) - Height: 236 BAKING CHAMBER DIMENSIONS (in cm): - Width: 120 - Length: 160 - Height: 15 (4 lower decks), 17 (top deck) EQUIPMENT: - Used gas or oil burner (new burner also available) We offer equipment in various technical conditions and at different prices: 1. Directly from the bakery. 2. After inspection, with start-up warranty. 3. Refurbished, with 6-12 month warranty. Fodpfx Ajtr E Auefleft The machine is available for viewing at our warehouse (36-068 Bachórz, Poland). Paid options available: refurbishment / transport / installation / commissioning. The listed price is net. WE SPEAK ENGLISH, GERMAN, FRENCH, RUSSIAN, UKRAINIAN.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack used: bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable, extensions possible anytime) - (*Offer also available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Fodpomhh Dtofx Afleft Goods are packed for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The floor must be concrete, level, suitable for anchors, and able to withstand the applied loads. The customer is responsible for checking and ensuring the floor condition, load-bearing capacity, and any required official approvals. The rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to occupational health and safety regulations, it is recommended that racks have at least a 500 mm overhang above the top storage level relative to the top edge of the upright.

Stanje: skoraj kot novo (rabljeno), 7500 shelf inserts for Schäfer EF 6420 crate Used, in very good condition, see photos Length: 52.5 cm Width: 35.5 cm Height: 2.5 cm Negotiable price: €0.50 net per piece, ex stock, for orders of 100 units or more Larger quantities available on request! Goods are in stock. Transport and installation available on request. Fjdpsr Ey Dysfx Afleft Inspection possible at any time by appointment. Further information available upon request. We constantly have over 5,000 running metres of pallet racking from various manufacturers in stock. (Specifications, information, and prices are subject to change and error, as well as prior sale! Please refer to our Terms and Conditions. All prices exclude VAT, ex stock.)

Leto izdelave: 1990, Stanje: zelo dobro (rabljeno), Tehnični podatki: – Leto – 1990/2012 – Model – 8/SR12 – Hitrost – maks. 70 taktov/min – Razpon odprtine mreže – 25×25 – 100×100 mm Fjdpsd Sfgbofx Afljft – Premer žice – 1,5 – 5 mm – Število transformatorjev – 4 x 100 kW – Širina mreže – maks. 1200 mm – Dolžina mreže – 1000 – 3000 mm Leta 2012 sta bila na liniji nameščena nov krmilni panel in transformatorji.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base foot, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Mounting hardware (bolts, nuts and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts reordering and extension possible at any time - Offer available in larger quantities: approx. 90 uprights in stock Ffedpfx Aefdkb Toflet Detailed description: - Robust steel construction made of IPE sections (bolted system) - Hot-dip galvanized finish - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base foot and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including mounting hardware (without floor anchors) - With assembly instructions and load plates C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Material is packed efficiently for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The subsoil must be concrete, level and suitable for dowelling, and must be able to bear the loads applied. Floor condition, load-bearing capacity and any necessary official approvals must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to accident prevention regulations, it is recommended that rack uprights feature at least 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolted system, hot-dip galvanized design Scope of delivery: - 4 upright frames, height 3,500 mm, with foot sections, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard version - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Mounting hardware (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extension is possible at any time) - (*Bulk availability: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright: 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Arms height-adjustable in 100 mm increments - Each upright comes with 3 bolt-on cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Including mounting hardware (without ground anchors) - With assembly instructions and C4 load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notification before delivery. Material is sensibly packed to enable easy unloading. If installed outdoors, the load capacities reduce according to wind and snow loads. The foundation must be concrete, level, and suitable for dowelling, and able to bear the imposed loads. The customer is responsible for checking and ensuring the floor properties, load-bearing capacity, and for any permits required by authorities. Fedpfxemhh Dhe Afloft Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association recommendations, the uprights should have at least 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever rack used: bolted system, hot-dip galvanized version Scope of supply: - 4 upright frames, height 3,000 mm with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm center-to-center spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available for larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE sections (bolted system) Fsdpfx Asguk Dkjfljft - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - Local collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, load capacities are reduced according to wind and snow loads. The flooring must be concrete, even, suitable for dowelling, and capable of bearing the acting loads. Floor condition and load-bearing capacity as well as any required official permits must be checked and ensured by the customer. The upright frames must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to insurance association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, each with base section 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Fastening materials (bolts, nuts, and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts available and extensions possible at any time - Bulk offer available: approx. 40 uprights in stock Detailed description: - Sturdy steel construction made from IPE sections (bolted system) - Surface hot-dip galvanized - Rack height: 3,000 mm Ffodemhh Anepfx Aflet - Load capacity per upright: 2,250 kg - Base section and cantilever arms both 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - With assembly instructions and load capacity labels C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance delivery notification. Materials are packed efficiently for easy unloading. For outdoor installation, load capacities are reduced to account for wind and snow loads. The subfloor must be concrete, level, suitable for bolt anchors, and able to bear the applied loads. Floor condition, load capacity, and any required official permits must be checked and ensured by the customer. Racking uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to trade association guidelines, it is recommended that uprights project at least 500 mm above the uppermost storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack, used: bolt-together system in hot-dip galvanized finish Scope of delivery: - 4 uprights, height 2,600 mm, with base 1,000 mm - 12 cantilever arms with 1,000 mm depth, standard version - Including horizontal and diagonal braces for 1,300 mm upright spacing - Incl. fastening materials (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm Ffjdsguk Dvepfx Afljt - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Includes horizontal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load plates C4 according to DIN standards - Expert telephone consulting - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are manufactured exclusively in Germany. We provide reliable shipping with prior notice before delivery. Materials are packed sensibly for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for dowels, and able to support the applied loads. Base quality and load-bearing capacity, as well as any necessary official permits, are the customer's responsibility to check and ensure. The uprights must be anchored to the floor by the customer; anchoring to a wall is not necessary and not recommended. According to professional association guidelines, it is recommended the uprights maintain at least a 500 mm overhang to the top edge of the uprights on the highest storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Racking Used: Bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening materials (bolts, nuts, and washers) Fjdpfx Aomhh Dzofljft - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height: 2,600 mm - Load capacity per upright: 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and C4 load capacity plates according to DIN standards - Technical telephone support - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable shipping with advance notification before delivery. The material is packed in a way that allows for easy unloading. When installing outdoors, loading capacities are reduced due to wind and snow loads. The base must be concrete, level, and suitable for dowels, and capable of bearing the imposed loads. The floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall fixing is neither necessary nor recommended. According to professional association guidelines, it is recommended that rack uprights have an overhang of at least 500 mm above the top storage level.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 shelf uprights, height 2.56 m, with 1.0 m base section usable depth (1.2 m total depth) - 12 cantilever arms with 1.0 m usable depth - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Fastening materials (bolts, nuts, and washers) (*No paint damage!) Net price for collection: €1,490.00 plus VAT Delivery available for an additional charge Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface painted in RAL 7016 (Anthracite) - Rack height: 2,560 mm - Load capacity per upright: 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) Fodpfx Aoguk A Hjfljft - With assembly instructions and load capacity labels C4 in accordance with DIN standards - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight service with advance notice prior to delivery. The material is sensibly packed to ensure easy unloading. The installation surface must be concrete, level, suitable for anchoring, and able to bear the applied loads. The customer is responsible for checking and ensuring the surface quality, load-bearing capacity, and any necessary official approvals. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have a minimum projection of 500 mm above the top storage level.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with 1,200 mm usable depth base section 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright centre distance (4,000 mm rack length) Fastening material (bolts, nuts, and washers) Fedpfjmhhypjx Afljft - (*Delivery or pickup in approx. 1 - 2 weeks) - (*No paint damage!) - (*No damaged components!) - (*Spare parts available for reordering and extension anytime) - (*Offer available in larger quantities: Approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface painted in RAL 7016 (Anthracite) - Rack height 4,200 mm - Load capacity per upright 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - Supplied with assembly instructions and load plaques C4 according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance delivery notification. The materials are carefully packed for easy unloading. Delivery is possible approx. 1 - 2 weeks after order receipt. For outdoor installation, load capacities are reduced according to wind and snow load. The subfloor must be concrete, flat, suitable for doweling, and able to bear the imposed loads. Floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to German trade association recommendations, the rack uprights should have at least a 500 mm projection above the top storage level.