Širok Žep Polica nakup rabljenega (1.130)

Stanje: kot nova (razstavni stroj), Technical data for the wide-span rack beam: Rack system: SSI Schäfer Type: WR 600 Included in the scope of delivery: 01x Wide-span rack beam, second-choice Material colour: RAL 5010 gentian blue Box profile: 60 x 40 x 1.25 mm Redpfohtippex Agtet Beam type: TR4-240-064-25CEL QV71|71|3 Clear span: 2,400 mm 02x Safety pins, used Version: fully galvanized For securing the longitudinal beams against unintentional lifting General information about the item: This item is only available for collection. If transport or shipping of this item is required, it will incur additional costs, which can be individually requested from us depending on delivery location and scope.

Stanje: rabljeno, Your contacts in our company: Mr. Andre Evering Mr. Marcel Brahms Mr. Simon Blank Technical data for long-span racking beam: Manufacturer: Nimar Type: MI 50 Scope of delivery: 01x long-span racking beam, used Colour: grey Beam type: MI 50 Box profile: 80 x 40 mm Clear span: 2,600 mm 02x safety pins, used Design: fully galvanized For securing the longitudinal beams against unintentional lifting Our services at a glance: (Prices on request) - Assembly and installation Our general assembly conditions apply - Racking inspection Rack inspection according to DIN EN 15635, carried out in accordance with Rsdpfx Asdh Ub Aogtet BGR 234 visual inspection requirements for all racking systems - Delivery with our own fleet (unloading not included)

Stanje: rabljeno, Your contacts at our company: Mr. Andre Evering Mr. Marcel Brahms Mr. Simon Blank Technical data for wide-span racking beam: Manufacturer: Nimar Type: MI 50 The scope of delivery includes: 01x Wide-span racking beam, used Material color: grey Beam type: MI 50 Box profile: 60 x 40 mm Rjdpfx Agsdh Ubljtet Clear span: 2,000 mm 02x Safety pins, used Version: fully galvanized For securing the longitudinal beams against unintentional lifting Overview of our services: (Prices on request) - Assembly and installation Please observe our general assembly conditions - Racking inspection Racking inspection carried out according to DIN EN 15635 and in accordance with the requirements of BGR 234. Visual inspection for all racking systems. - Delivery with our own fleet (unloading not included)

Stanje: rabljeno, Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, nosilnost na odsek shranjevanja: 1.500 kg, skupna dolžina: 2.700 mm, skupna višina: 100 mm, skupna širina: 50 mm, Paletni regal / regal za težke tovore / prečka L=270 od HLF Heiss Prodajajo se samo prečke Rabljeno blago, ODLIČNO stanje, glej slike Dobavitelj: HLF Heiss Rjdpfey H Ew Iex Agtot Količina: 200 kosov Dolžina prečke: 270 cm Višina prečke: 10 cm / širina: 5 cm Nosilnost na polico: 1.500 kg Barva: oranžna Vključeno z varovali za obešanje Letnik izdelave: 2017 Blago na zalogi v Wilfersdorfu pri Mistelbachu/Spodnja Avstrija. Prevoz možen po dogovoru. Ogled možen kadarkoli po predhodnem dogovoru.

Stanje: rabljeno, Nedcon paletový regal pribl. 3,1 tm, rabljen Rjdpfoy D Nybex Agtst 🧰 Lastnosti izdelka • Proizvajalec: Nedcon • Barva: modra • Stanje: rabljen, glej slike • Okvirji: 2 kosa predmontirana 500 x 105 cm • Širina okvirja: 10 cm • Prečke: 8 kosov s svetlo širino 290 cm • Varovanje: 16 kosov pocinkanih varnostnih zatičev • Pritrditev: 8 kosov Hilti betonskih sider • Nosilnost: 2.000 kg na nivo • Poljska nosilnost: 12.000 kg • Vložene police vključene! 💰 Cena: 440 € neto brez DDV. • Količinski popust: po dogovoru • Stroški pošiljanja: po vsej Evropi po dogovoru • Dobavni rok: takoj dobavljivo • Ogled in prevzem: možno kadarkoli po dogovoru Stalno na zalogi več kot 5.000 tm paletnih regalov različnih proizvajalcev. (Pridržujemo si pravico do sprememb in napak v tehničnih podatkih, informacijah in cenah ter do vmesne prodaje! Glejte naše Splošne pogoje, vse cene brez DDV iz skladišča.)

Stanje: dober (rabljeno), Leto izdelave: 2016, 134 kosov, bočna zaščita / zaščita okvirja / zaščita pred trkom / vodilna ograja za paletne regale, enojne in dvojne vrste, Nedcon - rabljeno - : Cena iz skladišča: 95 € / kos (neto), demontirano, zapakirano in naloženo! Proizvajalec: Nedcon Tip: Set bočne zaščite sigma 135de Letnik: 2016 / 2019 Tip 1 (za enojne vrste): 6 kosov na voljo Bočna zaščita sigma 135° L=1100mm Rodoy Aixuspfx Agtet Set bočne zaščite sigma 135deg L=1100 Dolžina: 120cm Višina: 40cm Globina: cca 22cm Teža: cca 31kg Nova cena cca 205 € (neto) / kos Tip 2 (za dvojne vrste): 124 kosov na voljo Bočna zaščita sigma 135° L=2400mm Set bočne zaščite sigma 135deg L=2400 Dolžina: 243cm Višina: 40cm Globina: cca 22cm Teža: cca 41kg Nova cena cca 227 € (neto) / kos Stanje: dobro – zelo dobro Na voljo: takoj Lokacija: Augsburg

Stanje: dober (rabljeno), Leto izdelave: 2006, Approx. 100 bays of stable boltless shelving units, Gemac; this system works without cross braces. Frame height: 2.48 m or 2.31 m, shelves: 1.20 m x 1.30 m, 130 kg per level – used: Price per bay ex location: only €95 (net), dismantled, packed and loaded! Price for a minimum of 100 bays: Per bay ex location: only €85 (net), dismantled, packed and loaded! Rodpoy D Tm Sjfx Agtet Manufacturer: Gemac Type: should be Normaflex Year of manufacture: 2006 Frame height: approx. 2.48 m Bay depth: 1.20 m Bay width: approx. 1.31 m (including the frames, two bays are approx. 2.74 m wide) Shelves: Shelf load per level: 120 kg Bay load: 850 kg Shelves per bay: 6 including top shelf, which can also be used for storage The 6 shelves/levels consist of 3 large continuous shelves and 3 levels with narrower shelves (which together form a large surface) Shelf lift-out safety locks would need to be purchased new if required by the buyer – usually, they are not necessary (the plastic safety locks tend to break during dismantling – but there are metal types available as new products) Feet are plugged in and fastened with one screw each The top shelf is screwed to the next frame or shelf with a connector plate (all other parts are plugged in); thanks to this and the 3 large shelves with reinforcements, no cross braces or similar are required Available: approx. 100 bays immediately, suitable for assembly in 25 x 4 bay units Condition: good to very good Location: D-77749 Hohberg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base foot, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Mounting hardware (bolts, nuts and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts reordering and extension possible at any time - Offer available in larger quantities: approx. 90 uprights in stock Detailed description: - Robust steel construction made of IPE sections (bolted system) - Hot-dip galvanized finish - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base foot and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including mounting hardware (without floor anchors) - With assembly instructions and load plates C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Material is packed efficiently for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The subsoil must be concrete, level and suitable for dowelling, and must be able to bear the loads applied. Floor condition, load-bearing capacity and any necessary official approvals must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to accident prevention regulations, it is recommended that rack uprights feature at least 500 mm projection above the top storage level. Redpofdkb Tefx Agtjt

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack with roof beams: Hot-dip galvanized bolt system Scope of delivery: - 9 rack uprights, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms with 1,200 mm usable depth, with deflector - 9 roof beams, 1,500 mm cantilever, pre-drilled for on-site roof construction (*excluding timber purlins and trapezoidal sheets for the roof construction) - Including longitudinal and diagonal braces for 1,500 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and system can be extended at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction using IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright: 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof beams (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright fitted with 3 bolted cantilever arms, depth 1,200 mm, with deflector = 4 storage levels one above the other - Including longitudinal and diagonal braces with 1,500 mm center-to-center spacing - Rack length: 12,100 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with scheduling prior to delivery. Rsdpfxsh R Taqo Agtet Material is sensibly packed for easy unloading. The installation surface must be concrete, level, suitable for dowelling, and able to withstand the loads applied. The customer is responsible for checking and ensuring the ground condition, load-bearing capacity, and any official permits that may be required. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to occupational health and safety regulations, it is recommended that the rack uprights have at least 500 mm clearance above the top storage level.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with 1,200 mm usable depth base section 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright centre distance (4,000 mm rack length) Fastening material (bolts, nuts, and washers) - (*Delivery or pickup in approx. 1 - 2 weeks) - (*No paint damage!) - (*No damaged components!) - (*Spare parts available for reordering and extension anytime) - (*Offer available in larger quantities: Approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface painted in RAL 7016 (Anthracite) - Rack height 4,200 mm - Load capacity per upright 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg Rjdsmhhypjpfx Agtot - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - Supplied with assembly instructions and load plaques C4 according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance delivery notification. The materials are carefully packed for easy unloading. Delivery is possible approx. 1 - 2 weeks after order receipt. For outdoor installation, load capacities are reduced according to wind and snow load. The subfloor must be concrete, flat, suitable for doweling, and able to bear the imposed loads. Floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to German trade association recommendations, the rack uprights should have at least a 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolted system, hot-dip galvanized design Scope of delivery: - 4 upright frames, height 3,500 mm, with foot sections, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard version - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Mounting hardware (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extension is possible at any time) - (*Bulk availability: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright: 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Arms height-adjustable in 100 mm increments - Each upright comes with 3 bolt-on cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Including mounting hardware (without ground anchors) - With assembly instructions and C4 load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. Rodpfx Aemhh Dhjgtjt We offer reliable shipping with advance notification before delivery. Material is sensibly packed to enable easy unloading. If installed outdoors, the load capacities reduce according to wind and snow loads. The foundation must be concrete, level, and suitable for dowelling, and able to bear the imposed loads. The customer is responsible for checking and ensuring the floor properties, load-bearing capacity, and for any permits required by authorities. Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association recommendations, the uprights should have at least 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Racking Used: Bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height: 2,600 mm - Load capacity per upright: 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm Redpfsmhh Dzjx Agtet - Including fastening materials (without floor anchors) - With assembly instructions and C4 load capacity plates according to DIN standards - Technical telephone support - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable shipping with advance notification before delivery. The material is packed in a way that allows for easy unloading. When installing outdoors, loading capacities are reduced due to wind and snow loads. The base must be concrete, level, and suitable for dowels, and capable of bearing the imposed loads. The floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall fixing is neither necessary nor recommended. According to professional association guidelines, it is recommended that rack uprights have an overhang of at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, each with base section 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Fastening materials (bolts, nuts, and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts available and extensions possible at any time - Bulk offer available: approx. 40 uprights in stock Detailed description: - Sturdy steel construction made from IPE sections (bolted system) - Surface hot-dip galvanized - Rack height: 3,000 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms both 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - With assembly instructions and load capacity labels C4 as per DIN standard Rsdomhh Anopfx Agtst - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance delivery notification. Materials are packed efficiently for easy unloading. For outdoor installation, load capacities are reduced to account for wind and snow loads. The subfloor must be concrete, level, suitable for bolt anchors, and able to bear the applied loads. Floor condition, load capacity, and any required official permits must be checked and ensured by the customer. Racking uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to trade association guidelines, it is recommended that uprights project at least 500 mm above the uppermost storage level.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 shelf uprights, height 2.56 m, with 1.0 m base section usable depth (1.2 m total depth) Rsdeguk A Hjpfx Agtjt - 12 cantilever arms with 1.0 m usable depth - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Fastening materials (bolts, nuts, and washers) (*No paint damage!) Net price for collection: €1,490.00 plus VAT Delivery available for an additional charge Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface painted in RAL 7016 (Anthracite) - Rack height: 2,560 mm - Load capacity per upright: 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 in accordance with DIN standards - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight service with advance notice prior to delivery. The material is sensibly packed to ensure easy unloading. The installation surface must be concrete, level, suitable for anchoring, and able to bear the applied loads. The customer is responsible for checking and ensuring the surface quality, load-bearing capacity, and any necessary official approvals. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have a minimum projection of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack with roof supports: Hot-dip galvanized bolted system Scope of delivery: 9 rack uprights, height 4,230 mm with foot section, usable depth 1,200 mm 27 cantilever arms with usable depth 1,200 mm, with deflectors 9 roof beams with 1,500 mm cantilever, pre-drilled for customer-supplied roofing (*Without timber purlins and trapezoidal sheets for roofing) Including longitudinal and diagonal bracing for 1,500 mm upright spacing Including fasteners (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and expansion possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright 2,700 kg plus roof, wind, and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof supports (maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, 1,200 mm deep, with deflectors = 4 storage levels stacked - Including longitudinal and diagonal bracing at 1,500 mm upright spacing - Rack length: 12,100 mm - Including fasteners (excluding floor anchors) - Supplied with assembly instructions and C4 load plates according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time Rjdpfxomhhy No Agtjt - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight shipping with prior delivery notification. The material is packed appropriately to enable easy unloading. The floor must be concrete, level, capable of being doweled, and able to bear the acting loads. The customer is responsible for checking and ensuring the floor condition, load capacity, and any necessary local permits. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to trade association guidelines, the rack uprights should protrude at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever rack used: bolted system, hot-dip galvanized version Scope of supply: - 4 upright frames, height 3,000 mm with base section 1,200 mm Rsdpfx Asguk Dksgtst - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm center-to-center spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available for larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE sections (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - Local collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, load capacities are reduced according to wind and snow loads. The flooring must be concrete, even, suitable for dowelling, and capable of bearing the acting loads. Floor condition and load-bearing capacity as well as any required official permits must be checked and ensured by the customer. The upright frames must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to insurance association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack used: bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable, extensions possible anytime) - (*Offer also available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Goods are packed for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. Rsdpfomhh Dtox Agtst The floor must be concrete, level, suitable for anchors, and able to withstand the applied loads. The customer is responsible for checking and ensuring the floor condition, load-bearing capacity, and any required official approvals. The rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to occupational health and safety regulations, it is recommended that racks have at least a 500 mm overhang above the top storage level relative to the top edge of the upright.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack, used: bolt-together system in hot-dip galvanized finish Scope of delivery: - 4 uprights, height 2,600 mm, with base 1,000 mm - 12 cantilever arms with 1,000 mm depth, standard version - Including horizontal and diagonal braces for 1,300 mm upright spacing - Incl. fastening materials (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth Rsdsguk Dvopfx Agtet - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Includes horizontal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load plates C4 according to DIN standards - Expert telephone consulting - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are manufactured exclusively in Germany. We provide reliable shipping with prior notice before delivery. Materials are packed sensibly for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for dowels, and able to support the applied loads. Base quality and load-bearing capacity, as well as any necessary official permits, are the customer's responsibility to check and ensure. The uprights must be anchored to the floor by the customer; anchoring to a wall is not necessary and not recommended. According to professional association guidelines, it is recommended the uprights maintain at least a 500 mm overhang to the top edge of the uprights on the highest storage level.

Stanje: dober (rabljeno), Okvir: 2750*1100 mm Prečke: 1800*80 mm 2800 kg/polica 2700*100/120 mm 2400-3000 kg/polica Če potrebujete police ali dodatno opremo v drugih sestavah ali izvedbah, nas prosim kontaktirajte. Nudimo obsežen program novih in rabljenih regalov ter dodatne opreme in vam z veseljem pomagamo pri načrtovanju. Dodatna oprema kot na primer: Okvirna, kotna in čelna zaščita, zaščite pred potiskanjem, iverne plošče, rešetkaste police, zadnje mreže, distančniki na voljo. Pošiljanje: Rjdpfxsd Duc To Agtjt Prosimo, povprašajte za stroške prevoza z navedbo vaše poštne številke, kraja in želene količine artiklov. Druge storitve: Načrtovanje, montaža/demontaža regalov, odkup/prodaja Pridržujemo si pravico do sprememb in napak v tehničnih podatkih, informacijah ter cenah, kot tudi do predhodne prodaje!

Stanje: rabljeno, Traverse: 2700x120x50 mm, 63 ks Rámy: 5200x1000x95 mm, 17 ks 4600x1000x90 mm, 4 ks 2300x1000x95 mm, 2 ks Pokud potřebujete regály nebo příslušenství v jiných sestavách či provedeních, kontaktujte nás prosím. Nabízíme kompletní sortiment nových i použitých regálů a příslušenství a rádi Vám pomůžeme s plánováním. K dispozici další příslušenství jako např.: Ochrana rámu, rohů a nájezdů, zabezpečení proti protlačení, dřevotřískové desky, roštové podlahy, zadní mříže, hloubkové nosníky apod. Rodpfx Agoh Izr Ustjt Doprava: Na požádání Vám rádi sdělíme náklady na dopravu na základě PSČ, místa a požadovaného množství zboží. Další služby: Plánování, montáž/demontáž regálů, výkup/prodej Změny a chyby v technických údajích, informacích a cenách, jakož i mezitímní prodej vyhrazeny!

Stanje: rabljeno, Leto izdelave: 2007, RA1784 Galler OMEGA Pallet Racking System Used 16600 x 5400 x 1350 mm Installed in a warehouse Rack height: 5,400 mm Rack depth: 1,350 mm Clear bay width: 3,200 mm Stored goods: Pallets with goods Storage depth: 1,350 mm Storage levels: 1. Goods stored on the floor 2nd to 5th levels: goods stored on pairs of beams Load capacity per pair of beams with a clear bay width of 3,200 mm and level height of 1,500 mm: 2,100 kg Bay load: 8.4 t with a column buckling length of 1,500 mm (minimum 4 bays) → All load capacities apply to evenly distributed loads. Finish: Frame: Sendzimir galvanized Beams: RAL 7035 light grey WITH SURFACE RUST SPOTS Setup: 1 unit single-sided racking row, installed against a hall wall 5 x 3,300 + 100 = total length 16,600 mm Comprising: 6 units Galler Omega Upright Frames, bolted Rodjk Abbbspfx Agtst 5,400 x 1,350 mm 40 units Galler Sigma Beams 3,200 mm 80 units Safety Pins Price net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, Würzburg Optional, if required: 2 used impact protection corners At the beginning/end and at drive-through points for protecting the rack uprights For individual, professional advice, simply get in touch with us. Contact us by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and contact for intralogistics

Stanje: rabljeno, Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Modell 5003, nosilnost na konzolno roko: 1.500 kg, višina police: 3.585 mm, skupna dolžina: 6.200 mm, skupna širina: 1.520 mm, skupna višina: 3.985 mm, število vrst polic: 8, Konzolni regal, izvlečni, proizvajalec Lützenkirchen Rodpfx Agjyzn S Rotot

Stanje: skoraj kot novo (rabljeno), višina police: 7.800 mm, Used Meta frames for sale. The frames have the following dimensions: - 7800 mm length - 1100 mm depth Price per unit: €170 plus VAT. Available quantity: 150 Racking Systems | Sales • Assembly • Dismantling • Repairs | MM Lagertechnik We are happy to provide you with a non-binding quote—customized to your requirements. Our services include: ✔ Sale of warehouse racking systems ✔ Assembly & dismantling Redpfx Aoy Itvzogtjt ✔ Repairs & maintenance ✔ Purchase of used racking systems ✔ Racking inspections in accordance with regulations ✔ Training in warehouse technology We support you with the planning, delivery, and professional installation of your storage and operational equipment—reliably and efficiently. Thanks to our many years of experience in warehouse technology, we serve: - Small businesses - Medium-sized companies - Industrial enterprises from various sectors With us, you receive everything from a single source—from planning to implementation. Note: This advertisement does not constitute a binding offer. After you contact us, you will receive an individual quote tailored to your requirements.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, nosilnost na konzolno roko: 1.500 kg, skupna dolžina: 1.600 mm, Sale of OHRA cantilever arms, only the arms are available. The arms are used but undamaged. Various lengths and designs available. Lengths from 1000 mm to 1600 mm. Price from: €25 net plus VAT. Available: 1000 pieces Racking Systems | Sales • Assembly • Dismantling • Repair | MM Lagertechnik We are happy to provide you with a non-binding offer – tailored to your individual requirements. Our services: ✔ Sale of warehouse racking ✔ Assembly & dismantling ✔ Repair & maintenance ✔ Purchase of used racking systems ✔ Racking inspections according to regulations ✔ Training in warehouse technology We support you in the planning, delivery, and professional assembly of your warehouse and operational equipment – reliable and efficient. With our many years of experience in warehouse technology, we serve: Small businesses Medium-sized companies Industrial enterprises from various sectors With us you receive everything from a single source – from planning to implementation. Rjdpoy Irq Rsfx Agtst Note: This ad does not constitute a binding offer. After contacting us, you will receive a customized quotation according to your requirements.

Stanje: novo, Données techniques pour le plateau : Système de rayonnage : Meta Type : Clip Inclus dans la livraison : 01x Plateau de rayonnage, occasion Désignation du plateau : MS150-III Couleur du matériau : galvanisé sendzimir Dimensions : 1 000 x 500 x 40 mm Rsdpfx Agoy H Hkpetet Poids : 3,41 kg/unité Charge maximale par plateau : 150 kg (charge uniformément répartie). 04x Supports de plateau 40 mm, occasion, vzk argentés, pour plateaux en acier avec pli de 40 mm Finition : Zn bleu + therm 4h, galvanisé Couleur : argent Vos interlocuteurs dans notre entreprise : M. Andre Evering M. Mario Klöver M. Falk Deutsch Informations générales sur l'article : Cet article est proposé uniquement en enlèvement. Un transport supplémentaire ou une expédition de cet article entraîne des frais supplémentaires, qui peuvent être communiqués sur demande en fonction du lieu de livraison ou de l’étendue de la livraison.