Lesa Prijemala nakup rabljenega (12.873)

Stanje: skoraj kot novo (rabljeno), EX-DEMO MACHINE For sale is an as-new JET belt and disc sanding machine, model JSG-31A, with a disc diameter of 300 mm. This exhibition model is in its original condition and therefore comes with the full warranty. Technical specifications - Motor power: 1.1 kW / 1.5 HP / 230 V Nodpfx Adoycc Tdoyowb - Disc diameter: 300 mm - Disc speed: 2,700 rpm - Disc sanding table size: 230 x 420 mm - Disc table tilt range: -45° to +15° - Belt size: 150 x 1,220 mm - Belt speed: 11.5 m/s - Belt sanding table size: 190 x 330 mm - Belt sanding table tilt range: -45° to 0° - Belt arm swing range: 0° - 90° - Extraction connection: 100 mm - Dimensions (LxWxH): 830 x 700 x 1,400 mm - Weight: 124 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Freight shipping: Austria: €70.00 incl. VAT Germany: €90.00 incl. VAT South Tyrol: €110.00 incl. VAT Related terms: JET JSG-31A, belt sander, disc sander, belt, wood, combination sander, 150x1220, 300 mm, sanding machine, professional, workshop, stationary, machine Reference: R-A0117

Stanje: skoraj kot novo (rabljeno), SHOWROOM MACHINE For sale: as-new JET Double Drum Sander DDS-237 equipped with a powerful 400 V motor delivering 7.5 HP and a maximum sanding width of 940 mm. The showroom machine is in original condition, so you receive the full manufacturer’s warranty. Technical specifications: - Motor: 400 V / 7.5 HP - Drum speed: 1,400 rpm - Feed rate: 3 m/min - Max. sanding width: 940 mm - Sanding thickness: 0.8 to 133 mm - Minimum workpiece length: 230 mm - Sanding drum dimensions: each 152 x 940 mm - Sanding belt width: 75 mm or 100 mm - Extraction ports: 2 x Ø 100 mm - Dimensions (LxWxH): 1,090 x 1,420 x 1,090 mm Njdpfx Adeycc R Noyowb - Weight: 440 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Freight shipping: Austria: €180.00 incl. VAT Germany: €210.00 incl. VAT South Tyrol: €240.00 incl. VAT Related terms: JET DDS-237, double drum sander, wide belt sanding technology, wood finishing, 7.5 HP drive, 400 V industrial, 940 mm working width, feed system, workshop machine, professional sanding equipment Reference: R-A0117

Stanje: novo, Universal shredder for wood, pallets, fibreboards, wood offcuts, veneers, MDF boards, PVC, and more ROBUST Model: REUSER SD 700 ADVANTAGES: - Manual material feed or via excavator, forklift, or hydraulic lifting arm - Siemens® PLC control unit - ReSmart™ intelligent control system (optional remote access) - ReBoost™ function for increased hydraulic unit performance & higher pusher speed (optional) - Segmented ReMotion™ floor allows precise movement of the hydraulic pusher and reduces material jam risk GENERAL FEATURES: - Large feed hopper as standard; various sizes available on request - Hydraulically driven material pusher - Hardened special steel cutting tools with four cutting edges and hollow grind - Hardened special steel cleaning blades - Hardened special steel cutting bars - Screen made of HARDOX™ steel - Motor start via star-delta switch - Large hydraulic oil tank with 30 l capacity - 2 years or 2000 operating hours warranty TECHNICAL DATA: - Motor power: 22.0 kW - Rotor length: 650 mm Nedpohbdg Uefx Adyewb - Rotor diameter: 270 mm - Rotor speed: 80 - 120 rpm - Number of cutting tools: 28 - Number of cleaning tools: 2 - HARDOX™ screen hole diameter (choice): 10/15/16-12/20-15/30-20/30/40/50 mm - Throughput / Capacity: up to 5 m³/h (depending on material) - Feed hopper opening: 1446 x 1342 mm - Material pusher opening: 1410 x 850 mm Approx. dimensions (L x W x H): 1920 x 1550 x 1790 mm Weight: approx. 1750 kg INCLUDES OPTIONS: - 2nd cutting bar made of HARDOX™ steel - Toothed bar on material pusher Used machinery information: • Technical details may be subject to error; intermediate sale reserved. • Prices quoted are ex-site, free loading. • The machine has been cleaned and function-tested. • All machines are sold as seen, without any warranty claims. Buyers are welcome to inspect the machines on site. • Special agreements are only valid in written form. (Inquiries will only be answered with your address and telephone number!)

Stanje: rabljeno, Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 500-5512, konfiguracija osi: 1 os, Oprema: Na voljo je tipska ploščica, We are selling shredder Weima WLK 6 S together with grinder Koppern and transport system. Year of production is 2002. For more information please contact us. Nwsdpfx Adoyan Nlsysb

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WMA30EZZ0NM897237, prevoženi kilometri: 38.250 km, moč: 357 kW (485,38 KM), prva registracija: 09/2022, vrsta goriva: dizel, barva: bela, število sedežev: 2, Leto izdelave: 2022, Oprema: spojka prikolice, žerjav, Vozilo je zelo dobro ohranjeno! Obratovalne ure dvigala: 887 ur! Kilometri: 38.250 km Nwjdpfx Adexb R Tbeysb

Leto izdelave: 2000, Stanje: rabljeno, 2000 M.A.C. SN-OL 1230x650-10T Preša za upogibanje lesa Delovne dimenzije: 1230 x 650 mm Nwedpfxjychqhe Adyeb Tlačna moč: 10 ton Moč motorja: 5,5 kW

Stanje: kot nova (razstavni stroj), EX-DEMONSTRATION MACHINE We are selling our as-new Drechselmeister MIDI 1 woodturning lathe with a centre distance of 400 mm. The ex-demonstration machine is in its original condition, therefore you receive the full warranty. Technical Data - Centre height approx. 178 mm / Swing over bed 355 mm - Centre distance approx. 400 mm (extendable with optional bed extensions) - 3 belt stages / Infinitely variable speeds: 80 – 800 / 170 – 1,700 / 350 – 3,700 rpm - Spindle thread M33 x 3.5 (Morse taper MK2) with ASR (Euro) safety groove* - Tailstock with MK2 quill (50 mm travel with graduated scale!) - Motor 0.7 kW / 1 hp (230 V) with frequency inverter - Weight approx. 43 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Shipping rates: Austria: €50.00 incl. VAT Germany: €60.00 incl. VAT South Tyrol: €80.00 incl. VAT If you are interested in this machine, please enter your complete address details in the contact form so that we can process your enquiry professionally! Thank you, your NEUREITER Team Related terms: woodturning machine, lathe, wood lathe, turning lathe, woodturning, turning tools, wood turning, turning, machine Nsdpfetpn Nlex Adyewb Reference: R-A0117

Stanje: novo, Leto izdelave: 2025, The ideal machine for shredding both hardwood and softwood Another machine, available immediately (ex works Neckartailfingen) . Motor: 18.5 kW; 400 V - 50 Hz - 3 phase, Blades: 14+2 pieces, 40x40 mm, multiple cutting edges (rotatable), Rotor diameter: 260 mm, Control: Omron PLC, Cutting chamber opening: 600 x 800 mm, Hopper volume approx. 0.6 m³, Hydraulically operated pusher Screen perforation of your choice (12 - 40 mm) Extraction port Ø 160 mm Weight approx. 1,300 kg Dimensions (L x W x H) approx. 1737 x 1167 x 1650 mm Nwedpfx Adod E R D Sjyjb . The following options are available at extra cost: - Additional blade row + €1,990 net (28 instead of 14) - Surcharge for segmented floor, 4-sided + €2,170 net (Prevents the pusher from jamming. Recommended for material thickness less than 3 mm) - Shredder height increase by 30 cm (for conveyor belt integration) + €1,980 net - Angle conveyor (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €5,980 net - Control for conveyor belt and overband magnet + €2,750 net (synchronized start/stop with the shredder) - Special bearing + €1,540 net (rarely needed. Sealed, even more robust rotor bearing. worth considering for screens below 15 mm and/or high fines content. Not necessary if bearings are lubricated with grease approximately every 2 weeks in operation) . Requirements for raw material: - The moisture content (atro) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. will lead to increased wear. . We are happy to offer a free test using your material. For this, we invite you to visit us in Neckartailfingen. Alternatively, you may send your material to us by freight and we will document the test process with photos and videos.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Special price for our demonstration machine Another unit available immediately (ex works Neckartailfingen) Approx. 8 operating hours. Suitable for shredding all types of residual wood and pallet offcuts. Pallets must be pre-cut with a jigsaw or chainsaw so that they fit upright into the hopper—see image 2. Ideally, dimensions of approx. 40x20x20 cm allow the wood to lie flat on the ram base, which is the most efficient way for the machine to process it. A hydraulically driven ram at the bottom of the shredder pushes the wood against the rotor, with the pressure adjusted according to load. Material is shredded until it passes through the screen basket. Throughput up to 200 kg per hour (*depending on screen size and material preparation). Nododwktkepfx Adyowb *Discharge conveyor and overband magnet available at additional cost. + Powerful 18.5 kW motor + Concave blades + Heavy-duty large gearbox + Special load-dependent ram control system Commodity code: 84659600 Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Blades: 15 pieces, multiple-use (reversible) Option: Double blade row + €995 net Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Cutting chamber opening: 630 x 820 mm Fill volume: approx. 0.6 m³ Hydraulically actuated ram Screen perforation as requested (10–30mm) Extraction outlet Ø 160 mm Weight: approx. 1,300 kg (depending on configuration) Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm Moisture content: < 30% oven dry Standard equipment includes: - V-rotor for maximum throughput - Control cabinet with Siemens PLC - Automatic star-delta starter - High-speed hydraulics - Automatic shut-off in case of rotor idle - 70–90 rpm for high throughput - Cycle control to avoid idle times - Performance-boosting step control of the hydraulic ram - Pertinax guides for hydraulic ram - Vibration-damping machine feet - CE compliant - MADE IN GERMANY Shredder options: - Raise shredder by 30 cm (preparation for conveyor) + €2,080 net - Angled conveyor belt + €8,770 net Horizontal part: 1200 mm Inclined part: 2500 mm Adjustable angle: 0–60 degrees Discharge height: approx. 2000 mm (+/- 100 mm) - Overband magnet + €5,980 net - Control for conveyor and overband magnet + €2,750 net (Start/stop synchronized with shredder) - Extended hopper + €940 net - Eco rings: + €1,980 net (recommended for more than 15% hardwood content) - Special scraper + €990 net (recommended for veneer or paper) - Double blade row + €995 net Raw material requirements: - Moisture content (oven dry) must be below 30% - Metal or mineral contaminants such as sand, stones, etc., increase wear.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, obratovalne ure: 55 h, Machine with special rotor Available immediately Advantages: + special rotor, designed with reduced knife protrusion for processing both hard and soft materials + 22 kW motor + effective square knives *For pallets: up to a maximum of 10 pallets per hour (output depends on screen and material). Significantly higher throughput possible for smaller wood residue. Motor: 22 kW; 400 V - 50 Hz - 3 phase Screen: 15/20 mm or as agreed (10 to 40 mm possible) Hydraulically operated pusher Current screen perforation (15/20 mm) *interchangeable Extraction nozzle Ø 200 mm Feed opening 1000x1000 mm Dimensions: 2000x1800x1645 mm Sample image above: Colour of the unit may vary Weight: 1,920 kg Standard equipment included: - Control cabinet with PLC controller - Automatic star/delta start - High-speed hydraulics - Automatic stop when rotor idles Nsdpfxex Af Rdj Adyowb - 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing incremental control of the hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant The following options are available at extra cost: - Raise shredder by 30 cm (preparation for conveyor belt) + €2,480 net - Angled discharge conveyor (discharge height approx. 220 cm) + €12,980 net - Over-belt magnet + €5,980 net - Control for conveyor and over-belt magnet + €2,750 net (Start/stop synchronised with shredder) - Extended feed hopper 1500x1500 mm + €3,480 net Raw material requirements: - Moisture content (atro) must be below 25% - Material feed must be free from metals and mineral contaminants. Damage to the tools and/or increased wear may result otherwise.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, COURSE ROOM MACHINE For sale is a used Hager HDG 250 woodturning lathe with a center height of 250 mm. The machine was in use in our in-house turning courses, is in very good condition, and has been refurbished and inspected by our qualified personnel. (Fully operational) Technical data: - Center height: 250 mm Nwjdpfxertqi Ij Adyob - Distance between centers: 1,000 mm - Spindle thread: M33 x 3.5 with MK3 taper and ASR (Euro) anti-rotation groove - Spindle bore (diameter): 20 mm - Tailstock quill: 150 mm / MK3 - Tool rest (top): 300 mm - Weight: 270 kg - Dimensions (L x W): 1,800 x 640 mm - Motor: 2.2 kW (3 HP) - Speed range: 150 - 2,700 rpm The lathe is located in A-5431 Kuchl and can be inspected during our opening hours at any time. Subject to prior sale! If you are interested in this machine, please include your complete address details in the contact form so that we can process your inquiry seriously. Thank you! Best regards, your NEUREITER Team Related terms: woodturning lathe, lathe, turning machine, woodturning, turning, turning tools, wood turning, machine Reference: DH25500-K

Stanje: kot nova (razstavni stroj), EX-DEMONSTRATION MACHINE For sale is an almost new HAGER STAR 200 MAX wood lathe with a 640 mm distance between centers. The exhibition machine is in original condition, so you will receive the full warranty. Technical Specifications - Center height: 200 mm - Distance between centers: 640 mm (extendable*) - Infinitely variable speed: 300 – 2,900 rpm - Hollow spindle Ø = 15 mm with internal taper MK2 - Quill travel: 100 mm - Motor: 1.5 kW / 2 HP / 400 V (includes 230 V plug!) - Weight: 124 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Nwodotpnzdopfx Adyeb If you are interested in this machine, please provide your complete address in the contact form so that we can process your inquiry professionally! Thank you, your NEUREITER Team Related keywords: woodturning lathe, lathe, turning machine, wood lathe, woodturning, woodturning tools, wood turning, turning, machine, Hager Reference: R-A0117

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, EXHIBITION MACHINE For sale is an as-new TEKNATOOL Comet 2 DR wood lathe including stand, with a maximum distance between centers of 400 mm. Nodpfevbcm Rsx Adyswb The exhibition machine is in its original condition, therefore you receive the full warranty. Technical Data: - Center height: 150 mm - Distance between centers: approx. 400 mm (extendable) - 3 speed ranges (belt stages): 250 – 680 / 530 – 1,420 / 1,380 – 4,000 rpm - Digital speed display - Spindle thread: M33x3.5 with ASR (Euro) safety groove - Spindle and tailstock: MT2 - Motor: 0.6 kW / 0.75 HP - Forward / reverse operation - Tool rest: 150 mm - Weight approx. 32 kg - Year of manufacture: 2022 The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! If you are interested in this machine, please provide your complete address details in the contact form so that we can process your inquiry professionally! Thank you, your NEUREITER Team Related terms: wood lathe, turning lathe, lathe, woodturning lathe, woodturning, turning tools, wood turning, turning, machine

Stanje: novo, Leto izdelave: 2026, Yanigav FB90 Log Splitter Nwodpor D Nhmefx Adyeb • Weight: 1,080 kg • Splitting Force: 32 t • Drive: Hydraulic pump • Log Length: up to 115 cm • Log Diameter: 30–80 cm • Wedge Length: 45 cm

Stanje: novo, Leto izdelave: 2026, Yanigav Log Splitter FBH 210 / FBH210G / FBH210 E • Weight: 470 kg / 550 kg / 700 kg • Dimensions (LxWxH): depending on model and carriage length (1.51 m; 1.81 m; 2.11 m) • Force: 15 t / 19 t / 7.5 kW • Drive: PTO hub drive / hydraulic pump / three-phase electric motor • Log length: 121-211 cm • Wedge length: 260 mm Nwjdpfx Ader D Nhqsyjb Price: €5,600 / €7,500 / €10,000

Stanje: novo, Leto izdelave: 2026, Yanigav Wood Splitter FB9 / FB9G • Weight: 360 kg / 440 kg • Dimensions (LxWxH): 1.0 x 1.0 x 2.7 metres • Force: 15 t / 19 t • Motor: Hub drive PTO / Hub drive PTO • Log length: 50–110 cm • Log diameter: 30–70 cm • Wedge length: 30 cm Nsder D Ng Eopfx Adyjwb Price: €3,100 / €4,100

Stanje: novo, Leto izdelave: 2026, Yanigav FB25 Log Splitter • Weight: 730 kg with hydraulic winch • Dimensions (LxWxH): Nwsdpfjr D Ng Tex Adyeb • Splitting force: 25 t • Motor: PTO-driven hub drive • Log length: 50–115 cm • Log diameter: 35–80 cm • Wedge length: 35 cm

Stanje: novo, Leto izdelave: 2026, Yanigav log splitter FBW-8.5 • Weight: 112 kg • Splitting force: 8.5 t • Motor: single-phase motor with 2.5 HP / 1.85 kW • Log length: 54 cm Nwedpfx Ador D Ngzeysb • Log diameter: 10–50 cm • Wedge length: 24 cm Price: €1,780

Stanje: novo, Leto izdelave: 2026, Yanigav Log Splitter FB2000 / FB2000G Nwsdpfx Asr D Ng Nsdyjb • Weight: 280kg / 350kg • Dimensions (LxWxH): 0.9x0.9x2.7m / 1.05x0.9x2.7m • Splitting force: 13t / 15t • Drive: Hub drive via PTO / Hub drive via PTO • Log length: 50-110cm • Log diameter: 30-60cm • Wedge length: 24cm Price: €2,300 / €3,300

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Premer rotorja: 260 mm -Dobavna odprtina cca 830 x 1100 mm -Dolžina rotorja: 830 mm -Motor: 18,5 kW -hidravlični potiskalec -ena vrsta rezil -sito za ostružke -malo delovnih ur Nwodpfx Ajyat H Aodysb

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, obratovalne ure: 3.000 h, Funkcionalnost: popolnoma funkcionalen, moč: 18,5 kW (25,15 KM), skupna masa: 2.150 kg, Zelo dobro vzdrževan stroj v vrhunskem stanju z malo obratovalnimi urami elektronski mehki zagon, izklop v prostem teku Njdpfx Asyar Hzedyjwb Mawera RZM 200 Moč motorja: 18,5 kW Širina rotorja: cca 800 mm Hitrost rotorja: 135 obr/min Hidravlični potisnik s PLC krmiljenjem Zmogljivost sekljanja ca.: 500-850 kg/h Sito: 20 mm Odsesavanje levo ali desno: 210 mm Originalni lak Teža: 2.050 kg Stroj je nameščen pod obdelovalno linijo in je sekal le čisto les Zadnje vzdrževanje: 12/2024 Možna nakladanje podobno Weima, Untha, Reinbold, Zeno,

Stanje: skoraj kot novo (rabljeno), moč motorja 7,5 kW hidravlični potisni predal Nsdpfx Adeydpwrjyjwb moč hidravlične črpalke 1,5 kW dimenzije dozirnega lijaka 870x425 mm sito 15 mm zalogovnik s senzorjem odprtja CE oznaka tehnična dokumentacija leto izdelave 1996

Stanje: rabljeno, Leto izdelave: 1975, with new feed belt Machine completely overhauled, excellent condition Machine cleaned, completely overhauled, adjusted, test run conducted Table cleaned, aligned, adjusted Drive roller replaced Deflection rollers cleaned Pressure rollers adjusted Sanding pad manufactured New window fitted in door Oscillation checked and adjusted Nwjdpfx Aevwgczodyeb used Manufacturer: Löwer Model: RSM 280 S Year of manufacture: 1975 Machine no.: 3528 Number of belt units: 1 Motors: 5.5 HP Sanding width approx. 140 / 150 mm Sanding height approx. 120 mm Belt oscillation Belt blow-off Feed speed: 6 / 11 / 16 m/min Belt length approx. 1600 mm Belt width approx. 160 mm Extraction port diameter: 100 mm Required space (LxWxH): approx. 1400 x 1000 x 1600 mm Weight: approx. 650 kg Location: 97447 Gerolzhofen Sale in as-inspected condition Without warranty or guarantee - free on truck -

Stanje: rabljeno, Leto izdelave: 1983, including new feed belt top condition Machine overhauled, fully adjusted Tested with minimum 3 mm test sanding Various wear parts renewed, replaced New feed carpet New sanding shoe New sanding drum New door window Used machine Manufacturer: Löwer Model: RSM 280 SX Year of manufacture: 1983 Machine No.: 5245 Number of units: 1 Motor: 5.5 kW Sanding width: approx. 190 mm Sanding height: approx. 120 mm 3 feed speeds: 6 / 11 / 16 m/min Belt length: approx. 1600 mm Belt width: approx. 200 mm Height indicator: analog dial gauge Combination unit: drum/shoe Fixed sanding shoe Single-belt Belt air blast Nwsdpfx Aovwf Nyodyjb Extraction connection: D 100 mm Dimensions (LxWxH): approx. 1300 x 800 x 1700 mm Weight: approx. 550 kg Total connected load: approx. 6.5 kW Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in current condition as inspected, without overhaul, without warranty or guarantee

Stanje: rabljeno, Material width: 45 mm Material thickness: 45 mm Feed length: 100 mm Compressed air: 6 bar Clamping force of holding clamp: 25,000 N Clamping force of feed clamp: 15,000 N Feed force: 10,000 N Weight: 0.1 t Nwsdpsvuunysfx Adyeb Space requirement (W x D x H): 0.6 x 1.0 x 1.0 m Hydraulic clamp feed with special clamping jaws for profiles Diameter approx. 45 mm As is, without commissioning