Širok Žep Polica nakup rabljenega (1.281)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack with roof beams: Hot-dip galvanized bolt system Scope of delivery: - 9 rack uprights, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms with 1,200 mm usable depth, with deflector - 9 roof beams, 1,500 mm cantilever, pre-drilled for on-site roof construction Hodpfx Aoh R Taqjfaep (*excluding timber purlins and trapezoidal sheets for the roof construction) - Including longitudinal and diagonal braces for 1,500 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and system can be extended at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction using IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright: 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof beams (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright fitted with 3 bolted cantilever arms, depth 1,200 mm, with deflector = 4 storage levels one above the other - Including longitudinal and diagonal braces with 1,500 mm center-to-center spacing - Rack length: 12,100 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with scheduling prior to delivery. Material is sensibly packed for easy unloading. The installation surface must be concrete, level, suitable for dowelling, and able to withstand the loads applied. The customer is responsible for checking and ensuring the ground condition, load-bearing capacity, and any official permits that may be required. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to occupational health and safety regulations, it is recommended that the rack uprights have at least 500 mm clearance above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, each with base section 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Fastening materials (bolts, nuts, and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts available and extensions possible at any time - Bulk offer available: approx. 40 uprights in stock Detailed description: - Sturdy steel construction made from IPE sections (bolted system) - Surface hot-dip galvanized - Rack height: 3,000 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms both 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing Hodpfomhh Anox Afaep - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - With assembly instructions and load capacity labels C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance delivery notification. Materials are packed efficiently for easy unloading. For outdoor installation, load capacities are reduced to account for wind and snow loads. The subfloor must be concrete, level, suitable for bolt anchors, and able to bear the applied loads. Floor condition, load capacity, and any required official permits must be checked and ensured by the customer. Racking uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to trade association guidelines, it is recommended that uprights project at least 500 mm above the uppermost storage level.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 shelf uprights, height 2.56 m, with 1.0 m base section usable depth (1.2 m total depth) - 12 cantilever arms with 1.0 m usable depth - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Fastening materials (bolts, nuts, and washers) (*No paint damage!) Net price for collection: €1,490.00 plus VAT Delivery available for an additional charge Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface painted in RAL 7016 (Anthracite) - Rack height: 2,560 mm - Load capacity per upright: 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm Hodpfx Afeguk A Hsasp - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 in accordance with DIN standards - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight service with advance notice prior to delivery. The material is sensibly packed to ensure easy unloading. The installation surface must be concrete, level, suitable for anchoring, and able to bear the applied loads. The customer is responsible for checking and ensuring the surface quality, load-bearing capacity, and any necessary official approvals. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have a minimum projection of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack with roof supports: Hot-dip galvanized bolted system Scope of delivery: 9 rack uprights, height 4,230 mm with foot section, usable depth 1,200 mm 27 cantilever arms with usable depth 1,200 mm, with deflectors 9 roof beams with 1,500 mm cantilever, pre-drilled for customer-supplied roofing (*Without timber purlins and trapezoidal sheets for roofing) Including longitudinal and diagonal bracing for 1,500 mm upright spacing Including fasteners (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and expansion possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright 2,700 kg plus roof, wind, and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof supports (maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, 1,200 mm deep, with deflectors = 4 storage levels stacked - Including longitudinal and diagonal bracing at 1,500 mm upright spacing - Rack length: 12,100 mm - Including fasteners (excluding floor anchors) - Supplied with assembly instructions and C4 load plates according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. Hsdpfx Aomhhy Nsfaep We offer reliable freight shipping with prior delivery notification. The material is packed appropriately to enable easy unloading. The floor must be concrete, level, capable of being doweled, and able to bear the acting loads. The customer is responsible for checking and ensuring the floor condition, load capacity, and any necessary local permits. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to trade association guidelines, the rack uprights should protrude at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever rack used: bolted system, hot-dip galvanized version Scope of supply: - 4 upright frames, height 3,000 mm with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm center-to-center spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available for larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE sections (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - Local collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, load capacities are reduced according to wind and snow loads. Hodoguk Dkjpfx Afaop The flooring must be concrete, even, suitable for dowelling, and capable of bearing the acting loads. Floor condition and load-bearing capacity as well as any required official permits must be checked and ensured by the customer. The upright frames must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to insurance association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack, used: bolt-together system in hot-dip galvanized finish Scope of delivery: - 4 uprights, height 2,600 mm, with base 1,000 mm - 12 cantilever arms with 1,000 mm depth, standard version - Including horizontal and diagonal braces for 1,300 mm upright spacing - Incl. fastening materials (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Includes horizontal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load plates C4 according to DIN standards - Expert telephone consulting - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are manufactured exclusively in Germany. We provide reliable shipping with prior notice before delivery. Materials are packed sensibly for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for dowels, and able to support the applied loads. Base quality and load-bearing capacity, as well as any necessary official permits, are the customer's responsibility to check and ensure. Hsdpfsguk Dvex Afajp The uprights must be anchored to the floor by the customer; anchoring to a wall is not necessary and not recommended. According to professional association guidelines, it is recommended the uprights maintain at least a 500 mm overhang to the top edge of the uprights on the highest storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack used: bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable, extensions possible anytime) - (*Offer also available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) Hedpfemhh Dtjx Afaep - With assembly instructions and load capacity signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Goods are packed for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The floor must be concrete, level, suitable for anchors, and able to withstand the applied loads. The customer is responsible for checking and ensuring the floor condition, load-bearing capacity, and any required official approvals. The rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to occupational health and safety regulations, it is recommended that racks have at least a 500 mm overhang above the top storage level relative to the top edge of the upright.

Stanje: rabljeno, Nedcon paletový regal pribl. 3,1 tm, rabljen 🧰 Lastnosti izdelka • Proizvajalec: Nedcon • Barva: modra • Stanje: rabljen, glej slike • Okvirji: 2 kosa predmontirana 500 x 105 cm • Širina okvirja: 10 cm • Prečke: 8 kosov s svetlo širino 290 cm • Varovanje: 16 kosov pocinkanih varnostnih zatičev • Pritrditev: 8 kosov Hilti betonskih sider • Nosilnost: 2.000 kg na nivo • Poljska nosilnost: 12.000 kg • Vložene police vključene! 💰 Cena: 440 € neto brez DDV. • Količinski popust: po dogovoru • Stroški pošiljanja: po vsej Evropi po dogovoru • Dobavni rok: takoj dobavljivo • Ogled in prevzem: možno kadarkoli po dogovoru Stalno na zalogi več kot 5.000 tm paletnih regalov različnih proizvajalcev. Hedpfx Afoy D Nybjasp (Pridržujemo si pravico do sprememb in napak v tehničnih podatkih, informacijah in cenah ter do vmesne prodaje! Glejte naše Splošne pogoje, vse cene brez DDV iz skladišča.)

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, nosilnost na odsek shranjevanja: 800 kg, skupna dolžina: 2.000 mm, skupna višina: 2.000 mm, skupna širina: 600 mm, višina police: 2.000 mm, dolžina police: 2.000 mm, nosilnost na stojalo: 200 kg, Regal je izdelan iz visokokakovostnega jekla s površinsko obdelavo z epoksi barvo. Ima trdno in stabilno konstrukcijo, sestavljeno iz ojačanega okvirja, jeklenih prečk in polic z dodatnimi ojačitvami. Te lastnosti zagotavljajo dolgo življenjsko dobo in visoko nosilnost. Regal se hitro sestavi in po potrebi preuredi, zato se enostavno prilagodi vašim potrebam ter omogoča izjemno vsestransko uporabo. Kovinski regal omogoča shranjevanje zajetnih predmetov z maso do 200 kg na posamezno raven police. Primeren je za shranjevanje zabojev za orodje, delavniških dodatkov, proizvodnih materialov, orodja, konzerv kot tudi sezonskih izdelkov. Modularni sistem se popolnoma prilagodi industrijski kot tudi domači uporabi. Zaradi svoje vsestranskosti se regal uporablja v skladiščih, trgovinah, veleprodajah, delavnicah, pisarnah, arhivih, garažah, kleteh ali shrambah. Regali omogočajo lahek dostop do izdelkov, nameščenih na policah. Ponudba za regale: 1- Število polic: 4 Nosilnost na polico (kg): 200 Višina (cm): 200 Dolžina (cm): 200 Hedpfx Aszdcmmefasp Globina (cm): 60 Cena = 100 EUR 2- Število polic: 4 Nosilnost na polico (kg): 200 Višina (cm): 200 Dolžina (cm): 120 Globina (cm): 60 Cena = 100 EUR

Stanje: dober (rabljeno), Dvižni sistem, Megamat, 170kg na polico, cca 6m višine – rabljeno: Cena na lokaciji: 14.500.- € (neto), dodatno demontaža ipd. Proizvajalec: Megamat Tip: Megalift 14448/25/6010 Leto izdelave: 2000 Največja nosilnost na polico: 170kg Največja skupna nosilnost: 18.000kg Mere police: pribl. 2,45m x pribl. 0,80m Število polic: pribl. 40 kos Hjdpfxjyhxkme Afasp Mere naprave: Višina: pribl. 6,01m Širina: 2,76m Globina: pribl. 2,70m 3/N/PE 230/400V 10A, varovalka 16A Stanje: dobro Na voljo: takoj Lokacija: BG-8800 Sliven

Stanje: zelo dobro (rabljeno), Zaradi zaprtja obrata prodajamo. 4 kosi dvostranskih konzolnih regalov, sestavljenih iz 4 stebrov (IPE180) in 24 nosilcev (IPE100) dolžine 1500 mm. Skupne mere (ŠxGxV): 5800 x 3180 x 4500 mm. Nosilnost vsakega nosilca 625 kg. Vključeni novi vijaki 'Würth'. Brez razstavljanja in prevoza. Hjdpeza Azpsfx Afajp

Stanje: zelo dobro (rabljeno), Zaradi zaprtja podjetja, PRODAJA IZ NUJE. 1 kos enostranskega konzolnega regala, sestavljen iz 5 stebrov (IPE160) in 20 konzolnih rok (IPE100) dolžine 1200 mm, skupne mere (ŠxGxV): 6120 x 1300 x 4150 mm. Hedpoza Ayrsfx Afaep Nosilnost na roko 500 kg. Vključno z novimi vijaki 'Würth'. Brez demontaže in prevoza.

Stanje: zelo dobro (rabljeno), Zaradi prenehanja obratovanja prodajamo iz izrednih razlogov. Enostranski konzolni regal, sestavljen iz 5 stebrov (IPE160) in 20 nosilcev (IPE100) dolžine 1600 mm, skupne mere: (ŠxGxV) 6080 x 1760 x 4200 mm Nosilnost na nosilec: 500 kg Vključno z novimi vijaki 'Würth' Brez demontaže in transporta Hodpfoza Aw Rjx Afaop

Stanje: zelo dobro (rabljeno), Zaradi zaprtja podjetja prodamo. 1 kos enostranskega konzolnega regala, sestavljen iz 4 stebrov (IPE180) in 12 nosilcev (IPE100) dolžine 1500 mm. Skupne mere (ŠxGxV): 5800 x 1680 x 4500 mm. Nosilnost na eno roko: 625 kg. Vključeni so novi vijaki 'Würth'. Brez demontaže in transporta. Hedoza Aupspfx Afaop

Stanje: zelo dobro (rabljeno), Zaradi likvidacije podjetja PRODAJA zaradi posebnih okoliščin. 1 kos enostranskega konzolnega regala, sestavljen iz 3 stebrov (IPE180) in 9 nosilcev (IPE100) dolžine 1500 mm. Skupne mere (DxŠxV): 3885 x 1680 x 4500 mm. Nosilnost na vsako roko: 625 kg. Hsdpfjza Aruex Afaop Vključeni novi vijaki 'Würth'. Brez demontaže in prevoza.

Stanje: rabljeno, Traverse: 2700x120x50 mm, 63 ks Rámy: 5200x1000x95 mm, 17 ks 4600x1000x90 mm, 4 ks 2300x1000x95 mm, 2 ks Pokud potřebujete regály nebo příslušenství v jiných sestavách či provedeních, kontaktujte nás prosím. Nabízíme kompletní sortiment nových i použitých regálů a příslušenství a rádi Vám pomůžeme s plánováním. K dispozici další příslušenství jako např.: Ochrana rámu, rohů a nájezdů, zabezpečení proti protlačení, dřevotřískové desky, roštové podlahy, zadní mříže, hloubkové nosníky apod. Hjdpfsh Izr Ujx Afasp Doprava: Na požádání Vám rádi sdělíme náklady na dopravu na základě PSČ, místa a požadovaného množství zboží. Další služby: Plánování, montáž/demontáž regálů, výkup/prodej Změny a chyby v technických údajích, informacích a cenách, jakož i mezitímní prodej vyhrazeny!

Stanje: dober (rabljeno), Leto izdelave: 2006, Approx. 100 bays of stable boltless shelving units, Gemac; this system works without cross braces. Frame height: 2.48 m or 2.31 m, shelves: 1.20 m x 1.30 m, 130 kg per level – used: Price per bay ex location: only €95 (net), dismantled, packed and loaded! Price for a minimum of 100 bays: Per bay ex location: only €85 (net), dismantled, packed and loaded! Manufacturer: Gemac Type: should be Normaflex Year of manufacture: 2006 Frame height: approx. 2.48 m Bay depth: 1.20 m Hedpfx Afey D Tm Soasp Bay width: approx. 1.31 m (including the frames, two bays are approx. 2.74 m wide) Shelves: Shelf load per level: 120 kg Bay load: 850 kg Shelves per bay: 6 including top shelf, which can also be used for storage The 6 shelves/levels consist of 3 large continuous shelves and 3 levels with narrower shelves (which together form a large surface) Shelf lift-out safety locks would need to be purchased new if required by the buyer – usually, they are not necessary (the plastic safety locks tend to break during dismantling – but there are metal types available as new products) Feet are plugged in and fastened with one screw each The top shelf is screwed to the next frame or shelf with a connector plate (all other parts are plugged in); thanks to this and the 3 large shelves with reinforcements, no cross braces or similar are required Available: approx. 100 bays immediately, suitable for assembly in 25 x 4 bay units Condition: good to very good Location: D-77749 Hohberg

Stanje: rabljeno, Dvostranski lamelni skobeljni stroj Podajanje: 110 m/min Največja širina skobljanja: 310 mm Električna moč: 95,75 kW Spodaj: 37 kW Zgoraj: 45 kW Hodey Ry Ddspfx Afaop Podajalnik: 13 kW Poravnalna naprava zgoraj in spodaj

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Dvostranski lamelni skobeljni stroj Podajalna hitrost: 80 m/min Maks. širina skobljanja: 310 mm Spodnja gred: 22 kW Hsdpsy Ryx Uofx Afasp Zgornja gred: 30 kW Podajanje: 7,7 kW Nastavitev za spajanje: spodaj + zgoraj Leto izdelave: 1990

Stanje: dober (rabljeno), Okvirji: 8860x1050x80 mm 34 kosov 3000*1050 mm 7 kosov Prečke: 1860*75*45 mm (2800 kg/polica) 352 kosov 2760*115*40 mm (2400 kg/polica) 26 kosov 2700*100*50 mm (2400 kg/polica) 22 kosov Možen je tudi nakup delnih količin. Hodpfx Aed Hbqnefasp Če potrebujete regale ali dodatno opremo v drugih sestavah ali izvedbah, nas kontaktirajte. Nudimo celovit program novih in rabljenih regalov ter dodatne opreme, z veseljem pa vam pomagamo pri načrtovanju. Priprava individualne ponudbe je za nas samoumevna. Dostava: Prosimo, povprašajte za stroške prevoza tako, da navedete vašo poštno številko, kraj in želeno količino artiklov.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0729389557300, nosilnost na odsek shranjevanja: 160 kg, skupna dolžina: 162.000 mm, skupna višina: 2.500 mm, višina police: 2.500 mm, dolžina police: 162.000 mm, višina okvirja: 2.500 mm, obremenitev na par nosilcev (maks.): 160 kg, širina okvirja: 600 mm, število vrst polic: 23, 11 dvojnih vrst + 1 posamezna vrsta policnega regala, sendzimir pocinkan, vsak s 7,03 m dolžine, 2,5 m višine, 0,6 m globine, vsak s 7 polji s čisto širino 0,97 m. Vsako polje ima 7 polic, nosilnost police je 160 kg. - 184 okvirjev (FR25060) predmontiranih 2500x600 - 1127 polic (FB097604) 970x600x40 - 88 spojkov za dvojne vrste (FBDV-Set) - 22 dvojnih križnih vez (VK2510) - 23 oznak za nosilnost (BSMcP) Hedpfx Afsyy I Ensaop Okvirji so predmontirani. Prevoz / dostava: - največ 20 delovnih dni po prejemu plačila - dostava na gradbišče / mesto montaže - raztovarjanje s tovornjaka opravi kupec z lastno dvižno napravo - dobava po celotnem območju Republike Nemčije, razen otokov! Dostava v države EU po individualnem dogovoru.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0729389557300, nosilnost na odsek shranjevanja: 160 kg, skupna dolžina: 192.000 mm, skupna višina: 2.000 mm, višina police: 2.000 mm, dolžina police: 192.000 mm, višina okvirja: 2.000 mm, obremenitev na par nosilcev (maks.): 160 kg, širina okvirja: 600 mm, število vrst polic: 32, 16 dvojnih vrst policnega regala, sendzimir pocinkano, vsaka dolžine 6,03 m, višine 2 m, globine 0,6 m, vsaka s 6 polji, neto širina polja 0,97 m, vsako polje s 6 policami, nosilnost police 160 kg. Hedpfoyyvq Sox Afaep - 224 okvirjev (FR20060), predmontiranih 2000x600 - 1152 polic (FB097604) 970x600x40 - 96 povezav za dvojne vrste (FBDV-Set) - 32 dvojnih križev (VK2010) - 32 oznak za nosilnost (BSMcP) Okvirji predmontirani. Prevoz / dostava: - največ 20 delovnih dni po prejemu plačila - dobava prosto gradbišče / montažno mesto - razklad tovornjaka s strani kupca z lastno dvižno napravo - dobava po celotnem območju Zvezne republike Nemčije, razen otokov! Dobave v državah EU po individualnem dogovoru.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, število predalov: 26, trajanje garancije: 12 meseci, EXTENDABLE RACK FOR STORAGE OF GLASS PANELS M80-26 YEAR OF MANUFACTURE: 2026 / BRAND NEW We are a manufacturer of extendable racks for storing glass panels (crates with glass) or other sheet-like materials (sheet metal, sintered quartz, polycarbonate, furniture panels). Our racks are developed and manufactured in-house by our company in Poland. The materials we use for the production of our racks are certified for durability and are subject to continuous quality control. The rack consists of extendable, slightly inclined drawers. The rack enables you to save up to 75% of storage space, as all compartments are built parallel to each other and are only 10 millimeters apart. We offer rack versions in various dimensions and load capacities. After consultation, we can also manufacture racks with custom parameters to meet your individual requirements and specifications. The inclination of the compartments depends on the installation and can be set to the left or right. We particularly recommend our racks for glass workshops, stonemasons, furniture workshops, and advertising workshops that want to use their space efficiently. The racks are delivered as kits and require self-assembly. This is very easy, as our many years of experience have enabled us to develop a well-thought-out product, so assembly with the supplied instructions is trouble-free. Our technical department is always available to assist you. Alternatively, if you prefer our technician to supervise the installation, this can be arranged for a fee. TECHNICAL DATA FOR RACK M80-26: Application: for individual glass panels 255 cm x 160 cm Maximum glass panel size: 275 cm x 170 cm Number of compartments: 26 Width of support bar for glass: 8 cm Length of support bar for glass: 308 cm Material for supporting glass panels: Wooden board 308 cm x 8 cm x 2.5 cm Height of construction (A): 218 cm Width of construction (B): 384 cm Depth of construction (C): 317 cm Required floor space for proper use: 23 m² Floor requirements: smooth/level Number of bearings per compartment: 8 pieces Front wheel: Ø160 / reinforced polyamide Rear wheel: steel bearing wheel / rolled on profile Colour: RAL 7040 (grey) Corrosion protection: steel parts phosphated and powder-coated Permissible load per compartment: 900 kg Permissible total rack load: 23,400 kg Hsdpfx Aef S Hh Tjfasp Inclination of compartments: left or right, depending on assembly Assembly time: 7 hours Number of people required for assembly: 2 DOCUMENTS SUPPLIED WITH RACK M80-26: - Operating instructions - Assembly instructions - Data plate - Warranty: 12 months The product is delivered fully ready for use. Our company supplies racks for the storage of glass panels throughout the EU and other countries.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, število predalov: 30, trajanje garancije: 12 meseci, Our company (EXPOGLASS®) manufactures machinery and glass racks for the glass industry. Our portfolio includes an extendable glass rack 321 x 255. New product available on request. Technical data: - Number of drawers: 30 - Pane size: 2550 x 3210 mm for storage - Load capacity per drawer: 1500 kg Hedpfx Aoh Uudvofajp - Loading surface width: 80 mm - Total rack width: 4460 mm - Orientation (drawer tilt side): universal (depends on installation) - Number of positioning rollers per drawer: 8, with bearings - Design: modular (combinable) - Front roller material: floor-friendly polyamide Rear drawer roller: steel – turned, with bearing, double-flanged, runs on steel rail We export our products worldwide.

Stanje: rabljeno, Separator element for pallet racking system. Hjdpfx Afek Tzzleaop Suitable for 1000, 1050, or 1100 mm deep frame. Arm length: 500 mm For 2700 mm bay with 6 arms: 24 pcs – 67 EUR + VAT/pc For 2700 mm bay with 10 arms: 46 pcs – 89 EUR + VAT/pc For 1800 mm bay with 7 arms: 4 pcs – 51 EUR + VAT/pc If you require racking or accessories in other configurations or versions, please contact us. We offer a comprehensive range of new and used racking as well as accessories, and we are happy to assist you with your planning. Further available accessories: Frame, corner and impact protection, push-through protection, chipboard panels, mesh shelves, mesh back walls, depth rails. Shipping: Please inquire about shipping costs, specifying your postcode, location, and desired quantity. Additional services: Planning, racking assembly/disassembly, purchase/sale Subject to technical changes, errors, and prior sale!