Težka polica

Kragarmregal einseitig Höhe: 3.000 mm Nutztiefe: 1.200 mm / Länge: 4.000 mm

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: 4 rack uprights, height 3,000 mm, with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Itsdpfjmhhx Isx Al Njf Including longitudinal and diagonal braces for 1,300 mm bay spacing Fastening materials (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts available for reorder and extensions can be supplied at any time) - (Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fixing materials (without floor anchors) - With assembly instructions and C4 load labels as per DIN standard - Professional telephone advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight service with pre-delivery notification. Material is packaged for easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, suitable for dowels, and able to accommodate the applied loads. Floor quality, load-bearing capacity, and any required official permits are to be checked and ensured by the customer. The rack uprights must be anchored to the floor by the customer; anchoring to the wall is neither required nor recommended. According to the German employers’ liability insurance association, it is recommended that the rack uprights have a minimum 500 mm overhang above the top storage level.

Stanje: zelo dobro (rabljeno), 30 lfm Shelf Rack Schäfer Type R3000 Used equipment, as-new condition, see pictures Height: 2.5 m Depth: 80 cm Load capacity per shelf: 250 kg Bay width: approx. 128 cm Itjdped Nf Svsfx Al Nsf Asking price: €6,900 net ex-warehouse Offer includes: - 24 uprights or frames, 2.5 m, galvanized - 144 shelves (250 kg load capacity per shelf), galvanized - 9 cross braces for stabilization 6 levels per bay (additional levels available for a surcharge) Also available with a bay width of 100 cm! Other configurations possible. Heights of 2.5 m or 3.5 m available. Goods in stock. Delivery and assembly available on request. Viewing possible anytime by appointment. Further information on request. We always have more than 5,000 lfm of pallet racking from various manufacturers in stock. (Subject to changes and errors in technical data, specifications, and prices, as well as prior sale! See our Terms & Conditions, all prices exclusive of VAT, ex-warehouse.) Purchase / Sale: We are constantly looking for and offering numerous items from a wide range of sectors - Broom-clean business clearances - Business closures - Fast, flexible, responsive! - We also clear and/or dispose for liquidators. Send us a brief message, and we will contact you promptly. To visit our page, please click on our logo!

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Rack Used: Bolt System, Hot-Dip Galvanized Version Scope of delivery: - 4 upright frames, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm bay length (1,300 mm spacing) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes mounting material (without floor anchors) - Assembly instructions and C4 load capacity labels according to DIN standard included - Expert telephone advice - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior delivery notification. Iedpemhhf Sjfx Al Netf Materials are sensibly packaged to ensure easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, and suitable for dowelling, as well as able to bear the applicable loads. Floor conditions and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site. Anchoring to the wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking, used: Hot-dip galvanized bolt-together system Scope of delivery: - 4 double-sided racking uprights, height 3,500 mm, each with 1,200 mm base parts - 24 cantilever arms, depth 1,200 mm, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. mounting hardware (floor anchors not included) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available anytime) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components with hot-dip galvanized finish - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright has 6 bolted cantilever arms and 2 base sections, depth 1,200 mm, standard = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (floor anchors not included) - Supplied with assembly instructions and C4 rated load signs according to DIN standard - Expert telephone support Iodpfx Aomkixwol Netf - Made in Germany - Short delivery times - On-site collection available Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notice before delivery. The material is packed for easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The base must be concrete, flat, and suitable for anchoring as well as capable of supporting the applied loads. It is the customer's responsibility to check and ensure the suitability and load-bearing capacity of the substrate and obtain any necessary permits. Racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to German safety guidelines, it is recommended that the uprights have a minimum overhang of 500 mm above the highest storage level.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Stroj za lepljenje robov Proizvajalec: Felder Tip: Tempora 60.06, F600 Leto izdelave: 2019 Popolnoma avtomatsko upravljanje iz nadzorne plošče. Enota za spajanje: Da Enota za odrezovanje: Da Enota za rezkanje radijev: Da Itsdpexix Hxsfx Al Nof Rezilo za vlečenje radijev: Da

Stanje: rabljeno, Leto izdelave: 2022, obratovalne ure: 99 h, številka stroja/vozila: 2106313, Pogon: kolesni Lastna teža: 2.680 kg Dvižni stolp: pregibna roka Nosilnost: 200 kg Delovna višina: 1.000 cm Itsdpfx Alotr Irpj Njf Največji horizontalni doseg: 300 m Transportne mere (D x Š x V): 2,7x1x1,99 Za dodatne informacije se obrnite na PFEIFER GROUP.

Leto izdelave: 2021, stanje: novo, Cantilever racking, double-sided, 4.16m height, 1.20m arms, 750kg per arm – NEW: Price ex works, loading included! 1 racking unit with 4 uprights: €3,420 (net)! Transport price within Germany (excluding islands): €550 (net)! Isdpfxefivhfs Al Nstf You can also build longer or shorter racking units by omitting or purchasing additional frames (or by changing the bay spacing); this example with 4 frames is simply the standard racking solution! A cantilever racking system, hot-dip galvanized, consisting of: 4 double-sided uprights approx. 4.16 m high, hot-dip galvanized IPE 160 / 100 profile with 2x3 adjustable arms of 1.20 m length per upright, 750kg load capacity per arm with bracing approx. 1.30 m Double-sided uprights approx. 4160 mm high, hot-dip galvanized Base and arm depth 1200 mm, with 3 height-adjustable arms per side Load capacity at load center 600 mm: 750kg per arm / 2,250kg per upright side With horizontal and diagonal bracing, bay spacing e = 1300 mm; standard is 1.30m Other standard bay lengths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! From a length of 1.50m an additional surcharge applies to the listed price! Special measurements (other bay spacings) are available upon request, incurring a surcharge and longer delivery time as they need to be custom manufactured! If no different bay spacing is specified, we supply the racking with a bay spacing of 1.30m. In this case, the length of a rack row with 4 uprights (3 bays) is approx. 4m. Delivered with all bolts and nuts (shipped within Germany directly by Würth), without floor anchors. Other configurations (upright height, arm lengths, arm types etc.) available! Please contact us!

Stanje: novo, Leto izdelave: 2024, SCHORR SCRUBBER-DRYER 24V FLOOR CLEANER SCRUBBER 100AH SCRUBBING MACHINE Efficient floor cleaning combined with exceptionally easy operation. Bring a sparkle back to your hall! The fully electric ride-on scrubber-dryer from SCHORR significantly eases the cleaning of large industrial surfaces, particularly thanks to the machine’s excellent maneuverability. With a steering angle of 90°, columns or narrow spaces are not an issue. No special training is required to operate the machine—simply fill, sit, and go. Equipped with 100Ah batteries, continuous intensive operation for approximately 4 hours is possible. The batteries can be conveniently charged with the supplied charger using a standard 230V socket. SCHORR SCRUBBER-DRYER RR1030FS – DISCOVER THE ADVANTAGES: -- Fully electric scrubber-dryer with 1030mm working width – ideal for large halls and areas -- Up to 4,500 m²/h cleaning capacity -- 80-litre fresh water tank and 85-litre waste water tank -- 510mm brush diameter -- Powerful 24V 100AH batteries -- Extremely robust and reliable Technical Data Manufacturer (Abbreviation): SCHORR Manufacturer’s Model Designation: RR1030FS Drive: Ride-on Vacuum Motor Power: 500W Brush Motor Power: 500W Drive Motor Power: 500W Operating Time: Approx. 4 hours Number of Wheels: 3 Tyres: PU (non-slip) Net Weight: 250 kg Basic Dimensions Fresh Water Tank Capacity: 80 l Waste Water Tank Capacity: 85 l Brush Diameter: 510 mm Overall Length: 1,400 mm Overall Width: 1,030 mm Overall Height: 1,100 mm *Further technical data available on request. The ride-on scrubber-dryer is designed with user-friendliness in mind, making the cleaning process as straightforward as possible. The intuitive control panel allows easy operation of all functions, so even inexperienced operators can use the machine efficiently. Thanks to the ergonomic seat and clear visibility of the cleaning area, you can work comfortably and efficiently. The large 80-litre fresh water tank and 85-litre waste water tank ensure long cleaning intervals without the need for frequent filling or emptying. The machine is highly maneuverable and ideally suited for use on large surface areas. Naturally, we usually have all spare parts in stock and can deliver them quickly if needed. Should you require technical assistance, our experienced technical team can also carry out repairs in our in-house workshop. Would you prefer to finance or lease the machine? No problem! We also offer attractive financing and leasing options. Please feel free to contact us for details and tailored advice. We look forward to your enquiry! Our SCHORR team is always happy to answer any questions you may have regarding our ride-on scrubber-dryers. You can reach our knowledgeable staff by phone or e-mail. We look forward to hearing from you and helping you with any queries. Itedpfxeuacy As Al Nef

Stanje: novo, Technical Data for the Pallet Racking System: Racking System: SSI Schäfer Type: PR 600 Technical Data for Installation: Number of Rack Rows: 01 unit Length per Rack Row: approx. 2,550 mm Number of Bays per Rack Row: 01 unit at 2,400 mm Number of Levels plus Floor Level: 04 units Scope of Supply Includes: 02x Pallet Racking Uprights, new Material color: Sendzimir galvanized Footplate color: RAL 5010 Gentian Blue Upright type: P73 Upright profile: 75 x 75 x 2.00 mm Incl. horizontal and diagonal braces, footplates Uprights are delivered unassembled (bolted truss design) Height: 2,350 mm Depth: 800 mm Note: The uprights are delivered unassembled. We can pre-assemble the uprights for you for an additional charge of €17.50 plus 19% VAT. 08x Pallet Rack Beams, new Material color: RAL 7035 Light Grey Box profile: 80 x 40 mm Beam type: ASM50-CES80|40|1.5 Design: Step beam Bracket: 5 HK (hooks) Clear span: 2,400 mm Max. load per pair of beams: 1,600 kg (with evenly distributed load) 04x Chipboards 2nd choice, used Thickness: 22 mm Dimensions: 2,380 x 710 mm Surface: possibly coated (possibly two-piece) 16x Safety Pins, new Design: fully galvanized Iodpfokti Siex Al Nstf For securing the longitudinal beams to prevent unintentional lifting 08x Through Bolts, new Manufacturer: Hilti Model: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: cracked concrete 04x Shim Plates, new Design: fully galvanized For leveling the racking uprights when installed on uneven floors 01x Load Sign With specifications of bay and section loads, manufacturer and commission number Dimensions: 297 x 210 x 2 mm Your contact persons in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General Information about the Item: This item is only available for collection. Any transport or shipping of this item beyond collection is subject to additional costs, which can be requested from us separately, depending on the delivery location or scope of supply.

Leto izdelave: 2020, stanje: novo, Cantilever rack, double-sided, 3.50m height, 1.20m arms, 750kg per arm – NEW: Price ex location incl. loading! 1 racking unit with 4 uprights €3,210 (net)! Transport price within Germany (excluding islands): €550 (net)! Of course, you can create longer or shorter racking units by omitting or purchasing additional uprights (or by varying the bay distance). This example with 4 uprights is simply the most common configuration! Itsdpjfivhgofx Al Njf A hot-dip galvanized cantilever racking system consisting of: - 4 double-sided uprights, approx. 3.50m high, hot-dip galvanized - IPE 160/100 - each with 2x3 adjustable arms, 1.20m long, 750kg capacity per arm - with bracing, approx. 1.30m - Uprights double-sided, approx. 3,500mm high, galvanized - Base and arm depth 1,200mm, each with 3 height-adjustable cantilever arms - Load capacity at 600mm load center: 750kg per arm / 2,250kg per upright side - With longitudinal and diagonal bracing, e = 1,300mm, standard is 1.30m. - Other standard bay sizes available from stock: 1.00m / 1.25m / 1.50m / 1.70m / 1.90m! - From 1.50m bay length onwards, a small surcharge applies to the listed price! - Custom sizes (other bay distances) are available on request – these also incur a surcharge and have a longer delivery time as they are made to order! - If no alternative bay distance is specified, we will supply the racking with a standard bay distance of 1.30m. - With 4 uprights (3 bays), the rack length is approx. 4m. - Delivery includes all bolts and nuts (shipping within Germany by parcel directly from Würth), without floor anchors. Other configurations (frame height, arm lengths, arm types, etc.) available on request! Please contact us!