Stroj za oblaganje robov
CASADEI INDUSTRIA E 350 PM

Name: CASADEI INDUSTRIA E 350 PM
Brand: CASADEI INDUSTRIA
Availability: InStock

Stanje

Novo

Lokacija

Cantù

Stroj za oblaganje robov CASADEI INDUSTRIA E 350 PM

Podatki o stroju

Oznaka stroja:: Stroj za oblaganje robov

Proizvajalec:: CASADEI INDUSTRIA

Model:: E 350 PM

Stanje:: novo

Cena in lokacija

Lokacija:: Via Lario 23, 22063 Cantu' - Como, Italy

Pokliči

Podrobnosti ponudbe

ID oglasa:: A21544723

Referenčna številka:: N0235

Posodobitev:: nazadnje dne 19.03.2026

Opis

Koda: N0235
Blagovna znamka: CASADEI INDUSTRIA
Model: E 350 PM

Avtomatski robni lepilni stroj s lepilnim lončkom za vroče taljenje (EVA), verižnim podajanjem plošč in predrezkarjenjem

Maksimalna kakovost obdelave
- Verižni podajalni sistem
- Predrezkanje (E350PM)
- 3 prosti prostori za končne enote

Visoka zmogljivost
- Hitrost podajanja 7 m/min
- Višina plošče 45 mm
- 2 mm robni trakovi

Minimalna zasedenost prostora
- Dolžina 2,30 m

Enostavna uporaba
- Nastavitve enot s kosom roba
- Preprosta in intuitivna uporaba stroja

3-položajna vodilna ograja pri vhodu
- 0-1-2 mm (glede na debelino roba)

Verižni transport plošč
- Zanesljiv oprijem plošče zagotovljen s posebnimi nedrsečimi gumijastimi blazinicami.
- Linearno podajanje omogočeno z dvojnimi drsnimi vodili s posebno geometrijo profila, natančno obdelano do stotinke milimetra.
- Dolgotrajno monolitno ogrodje, popolnoma obdelano v enem ciklu na CNC-obdelovalnem centru.

Pritiskalna letva z zapornimi ročicami
- Zgornja pritiskalna letva z dvojnim zaporedjem gumijastih koles na ležajih, z zapornimi ročicami in indikatorjem položaja

Predrezkarjenje
- NEVIDNA LINIJA LEPLJENJA
Dodoyvt Exjpfx Adisck
- DIAMANTNA orodja Ø= 60 mm H= 54 mm
- HF motorji 200 Hz – 12.000 obr/min – 0,75 kW (vsak)
- Namenski odsesovalni sistem in pihalnik za čiščenje plošče pred lepljenjem

Lepilna enota
- POPOLNO LEPLJENJE, HITRE IN PRAKTIČNE NASTAVITVE
- 6 grelnih elementov za enakomerno temperaturo lepila
- Motoriziran lepilni valj z notranjim električnim grelnim elementom
- Spodnji teflonsko prevlečeni lepilni lonček za popolno in hitro čiščenje

Pnevmatske škarje, pritisni valji, sistem podajanja roba
- PODROBNOSTI, KI ODVISUJEJO
- Podajanje roba je sinhronizirano z obdelovano ploščo
- Nihajno gibanje rezalne škarjaste enote za popolno lepljenje
- Hitro in natančno pozicioniranje pritiskalnih valjev
- Sistem "prebere" debelino roba, kar onemogoča napake!

Obrezovanje koncev
- UČINKOVITOST IN VSESTRANSKOST
- Odrez presežka roba spredaj in zadaj
- Delovni cikel nadzorovan s PLC-jem
- Možnost izklopa iz nadzorne plošče (PLC)

Poravnalna rezkalna enota
- Poravnalna rezkalna enota s standardnimi navpičnimi disk-kopirji
- Možnost obdelave za robove med 0,4 in 2 mm

Anti-adhezivna/pršna enota za ločevalni sredstvo (opcijsko)
- TRENUTNO POPOLNO ČIŠČENJE
- Pršilna funkcija nadzorovana s PLC-jem
- 2 pršilnika (spodnji in zgornji) in rezervoar za tekočino

Infrardeča svetilka (opcijsko)
- ZA NAJBOLJŠE POGOJE LEPLJENJA
- Ustvari optimalne pogoje za popolno lepljenje
- Segreva plošče in odstranjuje vse sledi vlage.

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.

Ponudnik

Registriran od: 2010

161 Oglasi na spletu

Pokliči

Pošlji povpraševanje

Telefon & Faks

+39 031 7... oglasi

Faks:

Ti oglasi bi vas prav tako lahko zanimali.

Mali oglas

Bad Sooden-Allendorf

677 km

Stroj za oblaganje robov
FelderG 580

Pokliči

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2010, Napetost 400V 3~ 50Hz 7,22kW Krmilna plošča z LCD-prikazovalnikom in tipkovnico Lepljilni agregat z 2 protismerno vrtečima diamantnima rezkama Dodpfx Ajyf I T Usdiock Naprava za zaokroževanje robov za čelne stranice Ročna nastavitev agregata Debelina robnega traku 0,4-5,0 mm (opcijsko 8 mm) Višina obdelovanca 8-60 mm Podajalna hitrost 11 m/min 3 prosti mesti za zaključno obdelavo agregatov Dovajanje robnega traku za rolo in trakasti material Strgalo

Poglej podrobnosti

Mali oglas

Stroj za robne trakove Holz-Her Perfect 1421

Nemčija

661 km

Stroj za robne trakove
Holz-HerPerfect 1421

1.900 €

Fiksna cena plus DDV

Pokliči

Stanje: rabljeno, Leto izdelave: 1989, Rabljeni stroj Leto izdelave: 1989 Dodpfx Aew I U E Aedieck Stanje: Preverjeno delovanje Oprema in tehnični podatki: Maks. debelina robnega traku mm: 20 Maks. višina robnega traku mm: 51 Maks. debelina materiala v roli mm: 3 Minimalna dolžina obdelovanca mm: 140 Minimalna širina obdelovanca mm: 60 Lepljenje: 1906 patrona Pritiskalna enota Rezkalna enota 1920 za rezkanje poravnano do 20 mm in posnetje robov Potrebna površina D x Š x V mm: 3150x1800x1375 Teža pribl. kg: 800 Lokacija: Flörsheim Razpoložljivost: Kratkoročno

Poglej podrobnosti

Mali oglas

Robna lepilka SCM Olimpic K 560 HP T ER 2 2017 SCM Olimpic K 560 HP T ER 2

Wijchen

922 km

Robna lepilka SCM Olimpic K 560 HP T ER 2 2017
SCMOlimpic K 560 HP T ER 2

Pokliči

Stanje: rabljeno, Leto izdelave: 2017, skupna višina: 1.800 mm, skupna dolžina: 4.800 mm, skupna širina: 1.000 mm, Color: Grey Price: On request - Special features: - Description: Machine is currently displaying an error; error code: empty machine - Year of manufacture: 2017 - Documentation available: No - CE marking present: Yes - CE certificate available: No - Number of units [pcs]: 9 - 1st unit type: Pre-milling unit - Tools included: Yes - 2nd unit type: Glue application unit - 3rd unit type: Pressure roller unit - Tools included: Yes - 4th unit type: End trimming unit - Tools included: Yes - 5th unit type: Corner rounding unit - Tools included: Yes Dcedpjyll Snefx Adisk - 6th unit type: Radius scraper unit - Tools included: Yes - 7th unit type: Corner rounding unit - Tools included: Yes - 8th unit type: Flat scraper unit - Tools included: Yes - 9th unit type: Brushing unit - Tools included: Yes - Glue system: Glue pot - Voltage [V]: 400 - Power consumption [A]: 42 - Transport dimensions: 4800mm x 1000mm x 1800mm (L x W x H) Financial information: Value added tax: The stated price is exclusive of VAT VAT/margin taxation: VAT reclaimable for businesses Delivery and trade-in possible at any time for any items from the industrial sector Yorick Diebels

Poglej podrobnosti

Mali oglas

Konzolni regal Kragarmregal einseitig Höhe: 4.160 mm Nutztiefe: 1.200 mm / Länge: 4.000 mm

Bad Feilnbach

293 km

Konzolni regal
Kragarmregal einseitig Höhe: 4.160 mmNutztiefe: 1.200 mm / Länge: 4.000 mm

2.290 €

VB plus DDV

Pokliči

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Rack Used: Bolt System, Hot-Dip Galvanized Version Scope of delivery: - 4 upright frames, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm bay length (1,300 mm spacing) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Dsdsmhhf Sjpfx Adisck Detailed description: - Robust steel construction made from IPE profiles (bolt system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes mounting material (without floor anchors) - Assembly instructions and C4 load capacity labels according to DIN standard included - Expert telephone advice - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior delivery notification. Materials are sensibly packaged to ensure easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, and suitable for dowelling, as well as able to bear the applicable loads. Floor conditions and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site. Anchoring to the wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Poglej podrobnosti

Mali oglas

Kombinirana skobeljno-debelinka & debelinka Felder AD 741

Grońsko

704 km

Kombinirana skobeljno-debelinka & debelinka
FelderAD 741

5.900 €

Fiksna cena plus DDV

Pokliči

Stanje: rabljeno, Skobeljni in debelinski stroj Felder AD 741 Spiralna gred Glavni motor 4 kW, Dolžina miz skobeljnika 2000 mm, Dcjdpfx Adsxxavmjisk Širina skobljanja 410 mm, Višina obdelave debelinke 230 mm, 1 hitrost podajanja, Ročna nastavitev mize debelinske skobeljnice z digitalnim prikazom višine Stroj pripravljen za delo, tih

Poglej podrobnosti

Mali oglas

Stroj za robne trakove Felder Tempora 60.06 F600

Saerbeck

858 km

Stroj za robne trakove
FelderTempora 60.06 F600

18.000 €

Fiksna cena plus DDV

Pokliči

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Stroj za lepljenje robov Proizvajalec: Felder Dedsxix Hxepfx Adisck Tip: Tempora 60.06, F600 Leto izdelave: 2019 Popolnoma avtomatsko upravljanje iz nadzorne plošče. Enota za spajanje: Da Enota za odrezovanje: Da Enota za rezkanje radijev: Da Rezilo za vlečenje radijev: Da

Poglej podrobnosti

Mali oglas

Cantù

455 km

Edgebander
BRANDT - GERMANYKTD 53

Pokliči

Stanje: dober (rabljeno), Koda: 0134 Znamka: BRANDT - NEMČIJA Model: KTD 53 Dcedpfx Adswq Sc Soijk Avtomatski robilepilni stroj za obdelavo lesa, PVC, furnirja, pohištva, izdelave pohištva po meri ter mizarske dejavnosti in drugo. Tehnični podatki: Minimalna/maksimalna višina obdelovanca: 10/40 mm Debelina robnega traku min/maks: 0,4 - 1,5 mm Hitrost podajanja: 7 m/min na motoriziranem valjčnem transporterju Minimalna širina obdelovanca: 65 mm Sestava: Enota za lepljenje Enota za striženje/odrezovanje traku Enota za čelno odrezovanje Enota za zgornjo/spodnjo obrezovanje Kolesa na podstavku za enostavno premikanje Napetost: 380/50 V Skupna moč: 4,5 kW Delovni tlak: 6 bar Dimenzije (DxŠxV): 1800 x 615 x 1170 mm Teža: 280 kg

Poglej podrobnosti

Mali oglas

Stroj za oblaganje robov Hebrock Euro 2000

Bitburg

758 km

Stroj za oblaganje robov
HebrockEuro 2000

Pokliči

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Tehnični podatki: • Proizvajalec: Hebrock GmbH (Izdelano v Nemčiji) • Tip: EURO 2000 • Leto izdelave: 1999 • Napetost: 230 / 400 V • Frekvenca: 50 Hz • Moč: 7 kW • Tokovna obremenitev: 13,6 A Delovno območje: • Debelina obdelovanca: pribl. 10 – 50 mm • Debelina roba: pribl. 0,5 – 3 mm • Minimalna dolžina obdelovanca: pribl. 250 mm Dcodpjy Ahtwofx Adijk • Minimalna širina obdelovanca: pribl. 70 mm • Hitrost podajanja: pribl. 10 m/min • Potreben priklop stisnjenega zraka (pribl. 6–7 bar) Lokacija: iz zaloge 54634 Bitburg - na voljo takoj -

Poglej podrobnosti

Mali oglas

Vertikalna žaga za plošče Striebig CONTROL 6224

Seeshaupt

337 km

Vertikalna žaga za plošče
StriebigCONTROL 6224

Pokliči

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Cutting area: 5300 x 2240/2100 x 80 mm Cutting depth: 80 mm Motor power: 5.5 kW Continuously adjustable scoring saw unit EPS.X – Electronic positioning system for X-axis stop 12" touchscreen display Saw Frame • Machine manufactured with high-precision parts to 1/100 mm tolerance • Massive, self-supporting, rigidly welded, torsion-resistant saw frame • TRK1 full-surface support wall made of birch multiplex with integrated small parts shelf • Auxiliary stop profile with dedicated measuring tape and 3 auxiliary stops for repeat cuts • Automatic detection of center support • Automatic roller locking during saw cut Saw Beam • Sturdy, durable steel construction • Automatic saw beam locking with cut position detection Saw Unit • Play-free, smooth-running guides • Robust carriage bearings ensure high cutting precision • Powerful, high-torque 5.5 kW motor (7.5 HP) • Enhanced convenience thanks to largely automated operation • Laser-assisted horizontal cut display • Automatic carriage clamping • Automatic plunge and tilt of saw motor • Pneumatic clutch for easy manual mode changeover • SUPERSILENT soundproofing to reduce saw blade noise • Electromagnetic motor brake • ProLock Easy-Fix tool clamping system Control • 12" touchscreen control panel with optimized operator guidance • Multilingual operator interface • Tool database for maximum flexibility and repeat accuracy • Fully automatic sawing operation • Infinitely variable feed rates 10–25 m/min • Selectable sawing cycle • Panel end detection • Constant return speed • Operating hours counter • Network connectivity • 24VDC UPS for touch PC (Uninterruptible power supply) • Automatic saw beam positioning ASP Djdpfxjyx H Dts Adijck Dimension Setting • DMS.x digital measurement system (horizontal axis for vertical cuts) • EPS.y electronic positioning system incl. ABO (vertical axis for horizontal cuts) Design, Ergonomics • Typical STRIEBIG product design • Multiple award-winning (including Swiss Design Prize) • Functional and ergonomic design Installation • Wall-mounted or free-standing installation possible

Poglej podrobnosti

Mali oglas

Konzolni regal Kragarmregal doppelseitig Höhe 3.500 mm Tiefe je Seite 1.200 mm / Länge 4.000 mm

Bad Feilnbach

293 km

Konzolni regal
Kragarmregal doppelseitig Höhe 3.500 mmTiefe je Seite 1.200 mm / Länge 4.000 mm

3.130 €

VB plus DDV

Pokliči

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking, used: Hot-dip galvanized bolt-together system Scope of delivery: - 4 double-sided racking uprights, height 3,500 mm, each with 1,200 mm base parts - 24 cantilever arms, depth 1,200 mm, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. mounting hardware (floor anchors not included) Dodpfsmkixwsx Adieck - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available anytime) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components with hot-dip galvanized finish - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright has 6 bolted cantilever arms and 2 base sections, depth 1,200 mm, standard = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (floor anchors not included) - Supplied with assembly instructions and C4 rated load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection available Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notice before delivery. The material is packed for easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The base must be concrete, flat, and suitable for anchoring as well as capable of supporting the applied loads. It is the customer's responsibility to check and ensure the suitability and load-bearing capacity of the substrate and obtain any necessary permits. Racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to German safety guidelines, it is recommended that the uprights have a minimum overhang of 500 mm above the highest storage level.

Poglej podrobnosti

Oglašujte tukaj